Stuck at boot logo no recovery and pc cant revodnise the device - Acer Iconia A700 and A510

I have an acer icoina a510 I unlocked the bootloader , installed team win recovery i booted in it then i turned the device of and after that i am stuck on the boot logo . When i try to enter the recovery nothing happens it only vibrates. When i connect it to a pc it says that the device is unknown. any advice on what i can do to fix it otherwise i am going to be dead
Edit:
Now it seems that it detects it in device manager but still i am stuck i will try to flash recovery and write if i have progress
Edit2:
Now it is detected as an mtp device strange
Edit3:
Forgot to tell you that the message at the top is:
Bootloader version JB-d0ca683(Unlock Mode)
and device manager recognizes the device as mtp an only sometimes as acer iconia tab a510 but nothing more.
Edit4:
So when i connect it it first says that it is an acer iconia tab a510 but after 2 seconds it changes to a mtp device. I have also installed the drivers from the official acer site. They are USB_Acer_1.0_A40I .
And this only changed mtp device from mtp usb device. I have read here on the forums how to try to enter fastboot but no luck. I can boot in the bootloader but i found out how to enter apx mode. for anyone wondering it is holding both vol down and vol up and power then your windows will recodnise it but don't let go just now because it will stop hold it for around 5 or 10 seconds and it will stay in it. But there are no drivers for it.
Edit5:
So now i am able to enter fastboot and tried to fkash a custom recovery image it said that it is flashed but nothing happened. Is there any way to flash a rom via flashtool?

Related

Need help - i brick tf??

Hi all,
I had paranoid rom on my tf101. I flash stock rom from sd and now booting stop in asus logo. After instalation I cant enter in recovery mode and I cant get in system to turn on debug mode. Windows see APX with yellow triangle. I thinkk I have wrong kernel.
How I can instal kernel from sd card without CWM? or How I can instal CWM from SD card by autoupdate on boot (vol - and power)?
Please help
Put the tablet in APX mode and try using Easyflasher
Do not use CWM, instead flash TWRP recovery
http://forum.xda-developers.com/showthread.php?t=1688012
Tutorial
https://www.youtube.com/watch?v=BxNmK6uXfFE
https://www.youtube.com/watch?v=itCS2lJ5V-w
https://www.youtube.com/watch?v=AhPvR0MicHg
https://www.youtube.com/watch?v=MrM6NfFRzV4
https://www.youtube.com/watch?v=kpg62BX5VTk
https://www.youtube.com/watch?v=s39R0wj_7J4
I have tried this. When I turn in APX mode I have yellow triangle - I instaled drivers. When I try to instal by nvflash I get info: "device not found" :/ When I instaling something in APX mode I shoud see something on TF screen?
I cant even to instal any recovery by EasyFlasher :/
Nothing is sending to device by EasyFlasher :/
Is possible to instal kernel by asus recovery (volume down + power)?
Try using these drivers for APX
http://forum.xda-developers.com/attachment.php?attachmentid=1489865&d=1353190065
Right click the device manager entry and point it to those extracted drivers
And no, you flashed stock, you now have stock recovery and no custom zips can be flashed from that
APX mode is Volume Up & Power while the TF is turned off, and plugged into the PC, you will see nothing on TF screen in APX mode, but you will hear USB connect sound when it enters APX mode
I think the problem is in that: When I instal stock rom debug mode was turn off and now I cant turn on it. This why I cant connect with my TF :/
APX mode does not need USB debugging mode
Sorry I found the reason... It was my Acer w511 and windows 8 :/ Tread to close

Soft brick after adb update (bootloop)

I don't know what went wrong with the adb update, but now I can't do anything. I can just enter in recovery mode and download mode.
The phone goes in bootloop (It can just load the first booting screen where there is the Samsung s6 logo) and when I try to do the manual update from external sd or adb etc... It says that is disabled. Any tip to fix it? The device was rooted before the 5.1.1 android update.
Help me please :crying:
ZioBanana said:
I don't know what went wrong with the adb update, but now I can't do anything. I can just enter in recovery mode and download mode.
The phone goes in bootloop (It can just load the first booting screen where there is the Samsung s6 logo) and when I try to do the manual update from external sd or adb etc... It says that is disabled. Any tip to fix it? The device was rooted before the 5.1.1 android update.
Help me please :crying:
Click to expand...
Click to collapse
Download smart swich to your pc got to emergencey recovery in the secound tab at top right put your model number and serial number in then it will ask you to put the phone into dl mode then it will fash stock back onto your phone

Is my phone bricked?

my phone is not recognized by my computer i cant boot into recovery mode or fastboot mode it. It just shows the android logo turns of and does that it loops i need help

Ulefone Power 3 Bootloop

Hello Guys,
I tried to install TWRP on my Ulefone Power 3.
I installed Adb Drivers and got the newest TWRP recovery.
I connected my Phone with the Pc and Installed it, there went nothing wrong.
Then I Restarted the Phone and all i get is the Message Orange Status, Your Phone has been unlocked and can´t be trusted. Your Phone will boot in 5 Seconds, after 5 secands the phone restarts and i get the same Message.
If i plug the Phone to the Pc It only does the Bootloop.
i can´t boot to the bootloader and Also i cant boot in to the Fastboot mode.
Sry for my bad english, I tried my best.
Thanks
I have the same problem with ulefone power 3
I have the same problem with ulefone power 3
I can't install any rom on my ulefone power 3 see the photos
https://imgshare.io/image/Dwip9
https://imgshare.io/image/DwyiO
please help me
IDK/King said:
Hello Guys,
I tried to install TWRP on my Ulefone Power 3.
I installed Adb Drivers and got the newest TWRP recovery.
I connected my Phone with the Pc and Installed it, there went nothing wrong.
Then I Restarted the Phone and all i get is the Message Orange Status, Your Phone has been unlocked and can´t be trusted. Your Phone will boot in 5 Seconds, after 5 secands the phone restarts and i get the same Message.
If i plug the Phone to the Pc It only does the Bootloop.
i can´t boot to the bootloader and Also i cant boot in to the Fastboot mode.
Sry for my bad english, I tried my best.
Thanks
Click to expand...
Click to collapse
basel.go said:
I have the same problem with ulefone power 3
I have the same problem with ulefone power 3
I can't install any rom on my ulefone power 3 see the photos
https://imgshare.io/image/Dwip9
https://imgshare.io/image/DwyiO
please help me
Click to expand...
Click to collapse
IDK/King said:
Hello Guys,
I tried to install TWRP on my Ulefone Power 3.
I installed Adb Drivers and got the newest TWRP recovery.
I connected my Phone with the Pc and Installed it, there went nothing wrong.
Then I Restarted the Phone and all i get is the Message Orange Status, Your Phone has been unlocked and can´t be trusted. Your Phone will boot in 5 Seconds, after 5 secands the phone restarts and i get the same Message.
If i plug the Phone to the Pc It only does the Bootloop.
i can´t boot to the bootloader and Also i cant boot in to the Fastboot mode.
Sry for my bad english, I tried my best.
Thanks
Click to expand...
Click to collapse
How did you solve it, I have the same problem

Flashed the worng TWRP, stuck in boot logo

I'm using a galaxy note 9 sm960F
I installed the wrong twrp and now my phone wont boot
I cant get into recovery mode or download mode
I even tried usb jig to force it to download mode but nothing happened
Odin cannot recognize the phone anymore
The phone wont drive into pc
I let the battery drain, then used different key combinations to see if it enters recovery but nothing
Please help me unbrick my phone thanx

Categories

Resources