Database Info

[Q](MT7-L09)5.1 back to 4.4.2 (also with bootloop)

For those who are not satisfied with 5.1 or stuck in bootloop, here a way back.
For the bootloop:
First you need to have the boot and recovery.img of 5.1 flash in fastboot. For an open bootloader is required!
- Fastboot.zip download and unzip.
- The fastboot folder to the hard disk on which you have installed Windows, move.
- Switch off (Vol - and press Power until it vibrates).
- In Windows, click Start - All Programs - Accessories, select Command Prompt.
- In the window cd .. and press Enter while typing up her only the drive letter (C: \>) see.
- Now you give a cd fastboot and Enter . In order for her in the folder.
- Now that off with Mate Vol - to the PC.
- Now you give fastboot flash boot boot.img and Enter, then fastboot flash recovery recovery.img and Enter.
This means that both you have flashed.
- Now disconnect the device on and off with soft Vol + Power.
- Then you can proceed with the instructions.
For users whose system is running:
- Download and unzip this file. The Update.app contained therein in the dload folder to the SD.
- This flash now.
- Now the Update.app the B137SP03 in dload folder and flash
- After that the device starts again with 4.4.2.
Have Fun.

Question?? To use this commands
fastboot flash boot boot.img
fastboot flash recovery recovery.img
We need a unlocked bootloader???

Yes, for the bootloader must be open.

I can't unlock the bootloader... get errors in Huawei web to generate the unlock code...

Read times so that * # * # 1357946 # * # * the ID and use the displayed. Simply enter via the telephone keypad.

Fooox1 said:
Read times so that * # * # 1357946 # * # * the ID and use the displayed. Simply enter via the telephone keypad.
Click to expand...
Click to collapse
Ok I will try... but the mt7-l09 don't appear on the website??

Select the Y300-0100 as unit.

Fooox1 said:
Select the Y300-0100 as unit.
Click to expand...
Click to collapse
Says : "please input the correct product id"
I have tried every method and don't works

Can´t install it stops at 95%, and i get this message "update post process failed" What can i do?

djzero86 said:
Says : "please input the correct product id"
I have tried every method and don't works
Click to expand...
Click to collapse
use the id gererator app

netons said:
Can´t install it stops at 95%, and i get this message "update post process failed" What can i do?
Click to expand...
Click to collapse
Check everything and try again. Important in which step it jammed !? With such short sentences can not help you.

rowihel2012 said:
use the id gererator app
Click to expand...
Click to collapse
i try using the Product id Generator and dont works... try to change time zone in windows to hong kong and nothing...

Fooox1 said:
Check everything and try again. Important in which step it jammed !? With such short sentences can not help you.
Click to expand...
Click to collapse
Thanks Foox1, Its working perfect, even i had this error at 95% on the first UPDATE.APP, and i did not have the 300 roll back version when rebotting, i succeded installing 137SP03 after that at the end i installed B141 and everything was perfect.
I think B141 is the best update by now... i got very good performance and battery life... try it.
---------- Post added at 10:02 AM ---------- Previous post was at 09:55 AM ----------
djzero86 said:
i try using the Product id Generator and dont works... try to change time zone in windows to hong kong and nothing...
Click to expand...
Click to collapse
It did not work for me either, i sent a code request to [email protected] and i got this answer:
Dear Customer,
Thank you for supporting Huawei device. My working number is 3102.Your bootloader unlock code :##############，please keeping your unlock code properly. Thank you!
I got this reply from [email protected], give ir a try.
You have to send all your device information.
Product type: Smartphone
Product model: Huawei Ascend Mate 7 (MT7-L09)
Product SN: #########
Product IMEI/MEID: #########
Product ID: #######

Fooox1 said:
For those who are not satisfied with 5.1 or stuck in bootloop, here a way back.
For the bootloop:
First you need to have the boot and recovery.img of 5.1 flash in fastboot. For an open bootloader is required!
- Fastboot.zip download and unzip.
- The fastboot folder to the hard disk on which you have installed Windows, move.
- Switch off (Vol quietly and press Power until it vibrates).
- In Windows, click Start - All Programs - Accessories, select Command Prompt.
- In the window cd .. and press Enter while typing up her only the drive letter (C: \>) see.
- Now you give a cd fastboot and Enter . In order for her in the folder.
- Now that off with Mate Vol quietly to the PC.
- Now you give fastboot flash boot boot.img and Enter, then fastboot flash recovery recovery.img and Enter.
This means that both you have flashed.
- Now disconnect the device on and off with soft Vol + Power.
- Then you can proceed with the instructions.
For users whose system is running:
- Download and unzip this file. The Update.app contained therein in the dload folder to the SD.
- This flash now.
- Now the Update.app the B137SP03 in dload folder and flash
- After that the device starts again with 4.4.2.
Have Fun.
Click to expand...
Click to collapse
I can't understand the second part.
First we flash the update.app we take from the folder "Mate 7 (Jazz-L09) V100R001C900B308-Transition_Pack"
Then we flash the second update.app with the B137 firmware?

Yes, the first matches of the bootloader and the recovery, the second flashes the entire system.

Fooox1 said:
Yes, the first matches of the bootloader and the recovery, the second flashes the entire system.
Click to expand...
Click to collapse
Me I'm in 5.1. I will do and the 2 parts? Or only the second part?

If your system is running, then do it all from here:
For users whose system is running:

Fooox1 said:
If your system is running, then do it all from here:
For users whose system is running:
Click to expand...
Click to collapse
If my system running, you mean I'm running the lollipop, right?

Yes, if 5.1 is running and want to back 4.4.2. The first part is for users who have made it wrong, and the system will not boot.

I do the second part but nothing is happend. First I install the first file "update.app" then my phone reboot and then I install the second file update.app from B137, my phone reboot again but nothing it happens.
---------- Post added at 05:35 PM ---------- Previous post was at 05:21 PM ----------
Ok! I think I do it! I had change the recovery file yesterday with someone wrong, so I install from bootloader the right one! Thank you!!

Can you fix this Problem????

Hi i have an Honor8 and it's kinda destoryed
Problem :
1 Phone is stuck honor 8 logo or it show me the EMUI Huawei eReocover where i have three options A) shutdown B) reboot C) Download latest Version and recovery [ tried options C But i fails to download the package everytime ]
2: my honor 8 is usb dead meaning my pc dosent recognize my phone in anyway so.... yeah
3: Dont have stock Rom or custom rom
4: cant boot to twrp recovery at all
Good news at this point :
The Power and volume bottoms work ..........
Oh and i have Mrico SD card .........
IF you can solve this Problem you my friend are a certify genuineness

Rommco05 said:
Put full fw to sd card and turn on phone with buttons +/-/on,off together or flash .zip fw via twrp
Click to expand...
Click to collapse
are you saying that i should download the Frimeware to the miroc sd and press + - and power toghther i ll try that
and i cant boot to twrp to flash the zip
the for the replay i'll report after i try it

Rommco05 said:
Put full fw to sd card and turn on phone with buttons +/-/on,off together or flash .zip fw via twrp
Click to expand...
Click to collapse
I tried it but it said the the uppdate pakage dosent exist

Use Method 2
How to install Nougat Firmware on Honor 8 –
Method 1
1) First, download Android 7.0 Nougat ROM for Honor 8 from above and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now dial *#*#2846579#*#* from your phone dialer to open a hidden menu.
4) Now click on Project Menu -> Software Upgrade -> SDCard Upgrade.
5) Now select and run the update.
6) Wait until the installation process is complete and then reboot your device.
7) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
8) Now repeat step 3 to 6 again.
9) Done.
Method 2
1) Download Stock ROM for Huawei and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now turn off your device.
4) Now press “Volume Up + Volume Down and Power Button” together. The update process will start automatically.
5) Now wait for some time to complete the process.
6) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
7) Now repeat step 3 to 5 again.
8) Done.

Rommco05 said:
You have all ready fw in sdcard? Go to Huawei web download full firmware B131 and copy this file to sdcard
Click to expand...
Click to collapse
Yes i have Frimeware in my sdcard what know?

PhantonKid said:
Yes i have Frimeware in my sdcard what know?
Click to expand...
Click to collapse
press volume up, down and power when you start the phone. The firmware (UPDATE.APP) should be in a folder called dload and it should install.

Solved it guys thx for all the Help
it work omg so happy dint have i phone for tre days
download the Frimeware
Extart it
made new fold named dload
put the Uppdare.app in dload
power voulme + and -
and magic it works
you are all certify genuineness

StratOS_HTC said:
Use Method 2
How to install Nougat Firmware on Honor 8 –
Method 1
1) First, download Android 7.0 Nougat ROM for Honor 8 from above and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now dial *#*#2846579#*#* from your phone dialer to open a hidden menu.
4) Now click on Project Menu -> Software Upgrade -> SDCard Upgrade.
5) Now select and run the update.
6) Wait until the installation process is complete and then reboot your device.
7) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
8) Now repeat step 3 to 6 again.
9) Done.
Method 2
1) Download Stock ROM for Huawei and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now turn off your device.
4) Now press “Volume Up + Volume Down and Power Button” together. The update process will start automatically.
5) Now wait for some time to complete the process.
6) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
7) Now repeat step 3 to 5 again.
8) Done.
Click to expand...
Click to collapse
I dont understand step six Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
what second file ??

PhantonKid said:
I dont understand step six Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
what second file ??
Click to expand...
Click to collapse
The file named "Update_data_full_hw_(insert your region here).ZIP" It's a US, EU or Asia specific file you should flash as well. It include soft keyboard and other useful stuff.
Place ALL of its contents in the dload folder when flashing.

HwOTA for Huawei Mate10 Lite

HwOTA 7+8 for Huawei Mate 10 Lite​1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA 7+8
Short video tutorial for upgrade of any version authorized or unauthorized in phone P10 Lite Thanks @Alexxxx1
HwOTA8 method for rollback from EMUI 8 to Emui 5 - Huawei P10 lite Thanks @Alexxxx1
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!

vovan1982 said:
HwOTA for Huawei Mate 10 Lite​1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
Click to expand...
Click to collapse
Hello
thank you, worked for me.
from rne-l21c432b133, i got to rne-c432b135, and the bootloader is locked.
thanks thanks.

thank you works

Exodusnick said:
thank you works
Click to expand...
Click to collapse
For Oreo beta?

No to RNE-L21C432B135 Nougat
I haven't tested it for oreo beta I'm back to MORFUZ V 1.0

Great looking, it works perfectly, I tried to install oreo but it does not work, it always returns to 7.0 and 5.1. At least I managed to redirect the cell. But for the oreo version I think I have to wait because I've tried many but no one works.

I used this on top of the MidgarD ROM I had, now I have a normal 4.5G AND a working face unlock. On Stock ROM, I didn't have the option for the face unlock, and when I installed Elemental ROM and later MidgarD ROM, it didn't work on both of those. This is interesting, isn't it?
I also didn't immediately lose my installed apps, by which I mean until I unlocked the bootloader again.
Bad news: Despite installing Magisk and enabling Magisk Hide after this, I fail the Safety Net check

Thanks man its working fine, my Mate 10 Lite was soft bricked or wont get proper hardware and face unlock, now it works
in start it was problematic for me, wifi would not turn on, phone will periodically show storage full (there was no SD Card in it)
then I restarted 2/3 times, and poof.
Now not only phone is back but it has oreo

Hi!
I tried this, downloaded the rne-l21c432b135 FullOTA from Firmware Finder and followed the instructions.
However, when it boots after finishing then my phone has turned into NEO-L21 and I am not able to get back to RNE-L21 without replacing the software with an older backup. It says also the unit is rooted (Huawei ID says so when I should enter my fingerprint) even though I have formatted the unit.
What am I doing wrong?
EDIT: Sorry, I had used the wrong file (there is one for the RNE-L01 and one for the RNE-L21) and that made all the difference, I am not back to stock!
Thank you so much for the help!

Hi,
Works for RNE-L01C432B135 perfect. I updated without any problem.
But because I don't want to stay with locked bootloader, I made all rooting procedure from the beginning.
That was easy too, because I have backups of every single details (important datas from internal storage, messages, programs and of course /data/hw_init folder, SuperSU-decyrpt)
Thanks again

vovan1982 said:
HwOTA for Huawei Mate 10 Lite​1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
Click to expand...
Click to collapse
You should probably add credit to @mankindtw as this is his script
And switch places of step 2 and 3

ante0 said:
You should probably add credit to @mankindtw as this is his script
And switch places of step 2 and 3
Click to expand...
Click to collapse
He refused to support the lite model. I re-wrote his script and improved it. I will not add it. He need to be more flexible.

vovan1982 said:
He refused to support the lite model. I re-wrote his script and improved it. I will not add it. He need to be more flexible.
Click to expand...
Click to collapse
Oh. Sorry!
Good job then

Where can I find HwOTA for Huawei Honor View10?

HI Guys
my current firmware is RNE-L21C185B110 but i can't find any FULL OTA firmware but only OTA MF (RNE-L21C185B142CUSTC185D001 this is the last available update).
My bootloader is unlocked, unrooted and without TRWP
How can I do to update to last firmware with HwOTA?

ok
To install the update of the B142 you do not necessarily have to use the HWOTA, you simply have to copy the DLOAD folder from the extracted RAR file to your SD, if your SD says that the file is very large ... format the SD to another type of Format..
Formatting a unit SD in exFAT
1. Double-click on Equipment.
2. Right-click on the flash drive or memory card, then select Format.
3. In the File System list, click exFAT.
4. Click on Start.
5. Click OK to begin the format.
After saving the DLOAD folder to the SD.
- Turn off your smartphone
- Now press the volume button up + Volume down + Power button at the same time, so that the update process starts automatically.
- This procedure takes 5 to 10 minutes to complete
- Automatically it will restart ... and you will have installed the update.
giangi64 said:
HI Guys
my current firmware is RNE-L21C185B110 but i can't find any FULL OTA firmware but only OTA MF (RNE-L21C185B142CUSTC185D001 this is the last available update).
My bootloader is unlocked, unrooted and without TRWP
How can I do to update to last firmware with HwOTA?
Click to expand...
Click to collapse

Great,
updated without any problem.
Thank you very much

You're welcome
At all times when I can help I will. Greetings and a pleasure to have contributed ...
giangi64 said:
Great,
updated without any problem.
Thank you very much
Click to expand...
Click to collapse

Hi, I use version l21c432b135 rne-without root,has anyone tried to make update oreo , at bla-l09c432 with firmware fiinder?

dyller said:
Hi, I use version l21c432b135 rne-without root,has anyone tried to make update oreo , at bla-l09c432 with firmware fiinder?
Click to expand...
Click to collapse
I have the same model of L21, the firmware finder doesn't find the update yet. I'm located in Slovenia, if that helps anyhow. Although today I received the April security update B135.

Honor 8 update

Hello guys. I have a Honor 8 (Al-C900B120 version) how run Android 6.0 with EMUI 4.1. I want to update it to Android 7 and EMUI 5 or more but i don.t find the pack with update because my phone don.t want to riceve it. Can somebaby help me to solve this think and let here a link .
Tnk !

Hello! Do you already tried to install and use HiSuite software on your computer to get an update?

Micdu70 said:
Hello! Do you already tried to install and use HiSuite software on your computer to get an update?
Click to expand...
Click to collapse
Yes but nothing

Iosifcosmin said:
Yes but nothing
Click to expand...
Click to collapse
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )

Micdu70 said:
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )
Click to expand...
Click to collapse
if i do this , in the chines version the google play will be work ?

Iosifcosmin said:
if i do this , in the chines version the google play will be work ?
Click to expand...
Click to collapse
I don't know why it will can not work. It could be not pre-installed but you can install (and use) "Google services" APKs easily. (Don't forget to allow "Storage" permission / give full permissions)
Total size of the firmware given above is 5.29 GB (!!!) and you need to use "7-zip" to extract .tar.gz archive inside "Soft..." or "...Soft" folder. Extract archive again until you have "dload" folder which have "UPDATE.APP" file and 5 directories.
If I knew your phone model (AL00 or AL10?), I can try to give you the last firmware allowed to install on your phone (the "FullOTA" one - complete package firmware).

Micdu70 said:
I don't know why it will can not work. It could be not pre-installed but you can install (and use) "Google services" APKs easily. (Don't forget to allow "Storage" permission / give full permissions)
Total size of the firmware given above is 5.29 GB (!!!) and you need to use "7-zip" to extract .tar.gz archive inside "Soft..." or "...Soft" folder. Extract archive again until you have "dload" folder which have "UPDATE.APP" file and 5 directories.
If I knew your phone model (AL00 or AL10?), I can try to give you the last firmware allowed to install on your phone (the "FullOTA" one - complete package firmware).
Click to expand...
Click to collapse
My phone is Al-10

Iosifcosmin said:
My phone is Al-10
Click to expand...
Click to collapse
EDIT: Check your vendor info, type this phone number: *#*#2846579#*#* then go to "Network Information Query" > "Vendor Country Info". If you see "Vendor: all" and "Country: cn" = OK you can follow:
EDIT 2: If you see "allwyf" in vendor info, tell me and I will give you the good zip files!
Try to flash FRD-AL10C00B396 - "all-cn" vendor - January 2018 security patches included, via dload method. But there is 3 files to flash (in order!):
0) Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop.
/!\ It's better to use a SD Card, don't know if it works if you send files into Internal Storage! /!\
First flash: update.zip
1) Unzip archive, create "dload" folder inside root of SD Card memory if not present -or- delete "dload" content if exists, then transfer extracted file named "UPDATE.APP" inside "dload" directory.
2) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3) First Boot can take some minutes, wait patiently...
Second flash: update_full_FRD-AL10_all_cn.zip
4) Unzip archive and transfer extracted file named "UPDATE.APP" inside "dload" directory. (click "Yes" for erasing previous file)
5) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
6) And... Boot again... ^^
Third flash: update_data_full_public.zip
7) Unzip archive and transfer extracted file named "UPDATE.APP" inside "dload" directory. (click "Yes" for erasing previous file)
8) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
9) All files were flashed! OTA update will not give you updates because it's the latest OTA update (currently)...
10) If any issue, Factory Reset can help.

Micdu70 said:
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )
Click to expand...
Click to collapse
i follow your steps but when i turn on my phone (press up and down key + power key) the update stop at 5% and it stuck.... and after that it turn . What can i do to work the update?

What do you see/have when you do this:
Check your vendor info, type this phone number: *#*#2846579#*#* then go to "Network Information Query" > "Vendor Country Info".
?

P20 Pro CLT-AL00 (CN)

Hi folks,
I got this CLT-AL00 (CN) and the phone is amazing, though is running the Chinese firmware and it has some restrictions in Europe. I did some research today about changing the firmware to CLT-L29 and it confirmed what I feared.
But still I will ask anyway because long time since my last Android, can I install the Stock version of CLT-L29 and success? or it will brick/fail because its a firmware for another country?
Right now the phone is not rooted and it runs:
- Build number: 9.0.0.187 (C00E57R1P15) GPU Turbo
- EMUI version: 9.0.0
- Bootloader Version: Chipset-boston9.0.0.001(0416)_FASTBOOT
- Vendor Component Version: Chipset-boston 9.0.0.001(P.19042504.china)
- Cust-CHN 9.0.0.1(P.EXT4)
- Product Component Version: Product-CLT-LGRP1-CHN 9.0.0(P.19010502)
- Base Software Version: CLT-LGRP1-CHN 9.0.0.187
- Cust Software Version: CLT-AL00-CUST 9.0.0.57(00)
- Preload Software Version: CLT-AL00-PRELOAD 9.0.0.15(c00R1)
- Vendor Country Info: Vendor - all, Country - cn
Another extra questions, do people pay for getting the bootloader code or Huawei still provide it? Or perhaps there are other ways...

You cannot get the code, and without it you cannot do anything. Use the phone as is.

rambik33 said:
You cannot get the code, and without it you cannot do anything. Use the phone as is.
Click to expand...
Click to collapse
Thanks!
But what about this method? I found it in multiples sites and it's not mentioned the need of having the boatloader unlocked.
Flash Huawei stock Firmware Via Normal Update
1- Create a new folder on your phone storage or in your SD card, and rename it to dload.
2- Download & extract Huawei Mobile Stock firmware & copy the UPDATE.APP file on dload folder
3- In your Huawei Mobile, Open the dialer and enter:
*#*#2846579#*#*
ProjectMenu => Software Upgrade => SDCard Upgrade => OK
4- Select the Update.app that you copy on your phone storage or in your SD card.
5- Now Wait until the installation process completes.
6- When the installation completes, the phone will restart automatically
7- If you have the Data File and you want to flash it to,
8- Create a new folder on your phone storage or in your SD card, and rename it to dload.
9- Download & extract the update_data_Xxxxx & move the new update.app to the dload folder
10- In your Huawei Mobile, Open the dialer and enter:
*#*#2846579#*#*
ProjectMenu => Software Upgrade => SDCard Upgrade => OK
11- Select the Update.app that you copy on your phone storage or in your SD card.
12- Now Wait until the installation process completes.
13- That's it! the phone will restart automatically

ndabar said:
Thanks!
But what about this method? I found it in multiples sites and it's not mentioned the need of having the boatloader unlocked.
Flash Huawei stock Firmware Via Normal Update
1- Create a new folder on your phone storage or in your SD card, and rename it to dload.
2- Download & extract Huawei Mobile Stock firmware & copy the UPDATE.APP file on dload folder
3- In your Huawei Mobile, Open the dialer and enter:
*#*#2846579#*#*
ProjectMenu => Software Upgrade => SDCard Upgrade => OK
4- Select the Update.app that you copy on your phone storage or in your SD card.
5- Now Wait until the installation process completes.
6- When the installation completes, the phone will restart automatically
7- If you have the Data File and you want to flash it to,
8- Create a new folder on your phone storage or in your SD card, and rename it to dload.
9- Download & extract the update_data_Xxxxx & move the new update.app to the dload folder
10- In your Huawei Mobile, Open the dialer and enter:
*#*#2846579#*#*
ProjectMenu => Software Upgrade => SDCard Upgrade => OK
11- Select the Update.app that you copy on your phone storage or in your SD card.
12- Now Wait until the installation process completes.
13- That's it! the phone will restart automatically
Click to expand...
Click to collapse
Thats no change vendor bro))
So, this is method flash only service firmware of your location.

rambik33 said:
Thats no change vendor bro))
So, this is method flash only service firmware of your location.
Click to expand...
Click to collapse
Thanks for confirming it! I suppose that somebody did the test already, right? because its not mentioned that it should be used for the same location, either that or its obvious!

Hi guys,
I have exactly the same problem but my bootloader is unlocked.
Is it still possible to do this ? Im running EMUI 9.1.0.340 (C00E320R1P1patch03)
CLT-AL00 is my model number.

Marksmoura said:
Hi guys,
I have exactly the same problem but my bootloader is unlocked.
Is it still possible to do this ? Im running EMUI 9.1.0.340 (C00E320R1P1patch03)
CLT-AL00 is my model number.
Click to expand...
Click to collapse
I am change my CLT-L29 hw/eu to CLT-TL cmcc/cn, without bootloader code :п

Marksmoura said:
Hi guys,
I have exactly the same problem but my bootloader is unlocked.
Is it still possible to do this ? Im running EMUI 9.1.0.340 (C00E320R1P1patch03)
CLT-AL00 is my model number.
Click to expand...
Click to collapse
Can you please tell me how did you manage to unlock the bootloader? I suppose DC-unlocker or anything based on that.