Planing on getting a new head unit for my Jeep, so single din is really the only way to go unless you want to go down the big dash replacement path.
Thinking of getting the joying 8.8 .
Joying 8.8 Inch Single Din Android Auto&Carplay Android 10.0 Car Radio With New User Interface
SKU: JY-HQS01N4G-2Ship From: Chinese WarehouseCPU: UIS7862 12nm Dual ARM Cortex-A75 + Six ARM A55Ram: LPDDR4 4GB Rom:EMMC 64GBSupport Bluetooth, WiFi, DVR, OBD2, Back-Up Camera
www.joyingauto.com
How reliable are these units? As I assume warranty is almost none exisiting after PayPal support runs out.
What are your thoughts.? I was planing on going all in with DVR, rear cam, TPS and engine scanner.
I have no experience with that device but I purchased a 60$ double Din unit 6 months ago that came with backup cam, steering wheel controls, BT, and screen casting from android. It has been surprisingly reliable and for the price even if it breaks I will just buy a newer unit and swap it. Anyway I like the way that one looks but the price... I bet Amazon has a cheaper alternative
What unit did you get?
Spastro said:
What unit did you get?
Click to expand...
Click to collapse
I was trying to stick with single din as there is least adjustments required for me car
I purchased a Joying 7862 10.5 inch head unit, because I read that the Navifly/Mekede ones do not sent the proper low-level line output signals the amplifier(s). I discovered that Joying's firmware does not allow making hands-free phone calls using Google Assistant. When I give the voice command "Hey Google, call mom", it responds with "I'm not able to make calls yet". Has anyone has been able to make this work with the Navify/Mekede head units? I asked some resellers and they said that I can pay $15 more for "Voice software" that will allow Google Assistant to work. Is this true?
I have 2 weeks to return my Joying for a refund, which I'm now considering. I contacted Joying support directly, and they responded that since I bought it on AliExpress I should contact my seller for support. When I asked the seller about the issue, they told me to install a firmware update dated 2021.7.5 to see if that solves it, but the result was the same. I regret spending so much more on a Joying brand and getting bad support.
Don't take it too hard, they are all mostly the same in terms of device support and universal unwillingness to fix that last 10% of software bugs which I think would make these units unbeatable value.
Yes even that odd spelling and probably just as mispronounced "T" brand.
That said, I was able to obtain spare parts out of both one of the xtrons resellers (who ever they are) and the forum Dasiata contact. I brought a Joying once, I wont make the same mistake.
Ended up buying a joying 10.25" android 8.1 from the official Amazon AU store for $230. It was a bargain I couldn't pass up.
Pretty happy with it so for and have had it for about 3 months.
The only 3 annoyances I have are.
1. Radio app always starts of the car is left off for a few days and radio compleatly shuts down.
2. Hey Google voice dialling doesn't work, but another forum member is helping me through that issue and we will hopefully sort it.
3. Audio controls can be mapped to virtual buttons on launcher.
i purchased a 10.5 joying head unit and i love it.. im able to use kodi, watch movies, no need for the brake bypass, it works with the factory amp, no issues there and i can make and recieve phone calls and text, i have t mobile magenta max sim card, i cant use the 5g service but i works great still. very awesome quality, i got the 6gb ram and 128 internal, i also run retro arch and run emulated video games.
After owning multiple rockchip devices (last a PX5 headunit), I'm now in theprocess of buying a new radio.
Initially I wanted to go for a MTCD radio with a PX6 cpu and 4GB of ram, but now also found the FYT devices with UIS7862, 6GB RAM and 128GB ROM.
(Mekede M600s)
And as "more RAM" is always very helpful with Android devices in the long term, I'm interested.
I saw that the community and ROM developement is not as big as for the MTCD devices, but I do not need to have that, if the devices itself are stable/good.
So I wanted to ask you guys, if you are satisfied with your decision and if you would buy it again?
Anything I need to know, coming from a MTCD device?
My main usage would be: Google Maps, Spotify, Bluetooth Connection to my phone for calls, Youtube, so nothing to fancy.
Yes. I've written about this a bunch. Look for my posts
You really don't need a modified "hal/mal" ROM with FYT.
Buggy MTCD is dead, long live MTCD
Very happy with my Navifly 7862 4gb. GPS is terrific and can't recall an unexpected reboot. Radio app is a bit naff but bang for buck, I would do it again in a heartbeat.
Bluetooth to phone is seamless and hotspot from phone via macro works like a charm.
If you are the sort of person who looks to find fault, you probably won't be happy. If you just want a system that works for the most part and you know the interface limitations, you will be fine.
Icefeldt said:
After owning multiple rockchip devices (last a PX5 headunit), I'm now in theprocess of buying a new radio.
Initially I wanted to go for a MTCD radio with a PX6 cpu and 4GB of ram, but now also found the FYT devices with UIS7862, 6GB RAM and 128GB ROM.
(Mekede M600s)
And as "more RAM" is always very helpful with Android devices in the long term, I'm interested.
I saw that the community and ROM developement is not as big as for the MTCD devices, but I do not need to have that, if the devices itself are stable/good.
So I wanted to ask you guys, if you are satisfied with your decision and if you would buy it again?
Anything I need to know, coming from a MTCD device?
My main usage would be: Google Maps, Spotify, Bluetooth Connection to my phone for calls, Youtube, so nothing to fancy.
Click to expand...
Click to collapse
I've been kind of keeping my eye on this too, but so far (to me anyway) it looks like
"same sh*t, different pile".
Meanwhile I was pleasantly surprised in my shift from px5 to px6. Px6 seems to be a fairly large upgrade as compared to px5.... runs smoother with a lot fewer bugs. Bluetooth is still a problem when trying to connect devices other than phone though
For me, I have a lot of gadgets connected to my system (tv, front cam, rear cam, dash cam, siriusXM tuner, OBD bluetooth adapter, OBD USB adapter...etc), and I find FYT is more restrictive and locked up when it comes to connecting all these peripherals. That was the make/break for me and is what made me decide to stick with mtcd
Bob_Sanders said:
I've been kind of keeping my eye on this too, but so far (to me anyway) it looks like
"same sh*t, different pile".
Meanwhile I was pleasantly surprised in my shift from px5 to px6. Px6 seems to be a fairly large upgrade as compared to px5.... runs smoother with a lot fewer bugs. Bluetooth is still a problem when trying to connect devices other than phone though
For me, I have a lot of gadgets connected to my system (tv, front cam, rear cam, dash cam, siriusXM tuner, OBD bluetooth adapter, OBD USB adapter...etc), and I find FYT is more restrictive and locked up when it comes to connecting all these peripherals. That was the make/break for me and is what made me decide to stick with mtcd
Click to expand...
Click to collapse
I respectfully disagree. Ex. MTCD hardware developer here.
Context is everything.
What FYT processor/MCU did you compare.
I have the opposite experience and find my 7862UIS/MCU 53 = YIN far superior and without any of the issues you mention.
On my FYT platform, it is FAR less restrictive. The bonus is the processor is superior and has 4g built in!
Then there is the audio quality, my FYT is simply amazing.
Back to MTCx, isn't it the reason so many mods / modded ROMs exist - again with their horrible problems and daily reports of issues - for the MTCx platform, to fix bugs and get around restrictions. But don't take my work for it, read the MTCD forums and compare.
marchnz said:
I respectfully disagree. Ex. MTCD hardware developer here.
Context is everything.
What FYT processor/MCU did you compare.
I have the opposite experience and find my 7862UIS/MCU 53 = YIN far superior and without any of the issues you mention.
On my FYT platform, it is FAR less restrictive. The bonus is the processor is superior and has 4g built in!
Then there is the audio quality, my FYT is simply amazing.
Back to MTCx, isn't it the reason so many mods / modded ROMs exist - again with their horrible problems and daily reports of issues - for the MTCx platform, to fix bugs and get around restrictions. But don't take my work for it, read the MTCD forums and compare.
Click to expand...
Click to collapse
Yeah, Thanks.
I read your other thread on your switch-over from mtcd with great interest. The problem I'm having is that you jumped ship at the PX5 level. I on the other hand went on to px6 from the px5, and there is no comparison between the two (both were Dasaita). The px6 is light-years ahead of the px5 both in terms of speed and stability. I used to have to do full reboots on the PX5 pretty much weekly to clear up the bugs. With the PX6 I have had to reboot maybe twice in the last 6 months.
I think to sum it up best, comparing the px5 to the px6 is about the same as comparing a 1960's black and white tv to a 60 inch lcd tv of today.
And with Dasaita in particular, the choice of input/output ability simply can not be beat. I have not seen another head unit which supplies the number of input/output jacks and plugs that Dasiata does.
Dedicated inputs for tpms, dash cam, front cam, and TV so I don't have to use up my USB slots. It also has dual subwoofer outputs so I don't have to weaken the signal with a Y splitter for my dual amps.
Now that being said, the new FYT machines do seem to have a slightly brighter screen which is always welcomed, and some also have digital audio outputs but that's not really something I would ever use.
Bob_Sanders said:
Yeah, Thanks.
I read your other thread on your switch-over from mtcd with great interest. The problem I'm having is that you jumped ship at the PX5 level. I on the other hand went on to px6 from the px5, and there is no comparison between the two (both were Dasaita). The px6 is light-years ahead of the px5 both in terms of speed and stability. I used to have to do full reboots on the PX5 pretty much weekly to clear up the bugs. With the PX6 I have had to reboot maybe twice in the last 6 months.
I think to sum it up best, comparing the px5 to the px6 is about the same as comparing a 1960's black and white tv to a 60 inch lcd tv of today.
And with Dasaita in particular, the choice of input/output ability simply can not be beat. I have not seen another head unit which supplies the number of input/output jacks and plugs that Dasiata does.
Dedicated inputs for tpms, dash cam, front cam, and TV so I don't have to use up my USB slots. It also has dual subwoofer outputs so I don't have to weaken the signal with a Y splitter for my dual amps.
Now that being said, the new FYT machines do seem to have a slightly brighter screen which is always welcomed, and some also have digital audio outputs but that's not really something I would ever use.
Click to expand...
Click to collapse
Youll find exactly the same input wise and more on the FYT platform.
marchnz said:
Youll find exactly the same input wise and more on the FYT platform.
Click to expand...
Click to collapse
Not on Joying or navifly. I looked. Maybe I'm missing these inputs?
Here's Dasaita..... a second DEDICATED plug set for
DVR (C)
TV (E)
TPMS (H)
Dual sub outputs (A)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bob_Sanders said:
Not on Joying or navifly. I looked. Maybe I'm missing these inputs?
Here's Dasaita..... a second DEDICATED plug set for
DVR (C)
TV (E)
TPMS (H)
Dual sub outputs (A)
View attachment 5452281
Click to expand...
Click to collapse
Look a little more on the latest FYT platform models.
All of these inputs are present or catered for with USB or AUX inputs, TPMS is USB for instance.
Also, FYT feature an optical out, which MTCx does not have.
You still haven't said what FYT you owned, context/specifics is really important.
The point is, the newer FYT units blow the MTCx units away in nearly every aspect, especially sound, while providing for the same features and more than the MTCx platform.
marchnz said:
Look a little more on the latest FYT platform models.
All of these inputs are present or catered for with USB or AUX inputs, TPMS is USB for instance.
Also, FYT feature an optical out, which MTCx does not have.
Click to expand...
Click to collapse
Well... that's exactly what I am saying. Because of the dedicated inputs I don't have to use up my USB inputs, or my AUX inputs. I can use those for other things (which I do). Also, the supplied software is completely built around those inputs. The software knows exactly where to go. The TV module for example is automatically turned on/off, and tuned up when I bring up the TV app. It all operates in one smooth motion. The FYT units are just plain lacking in this respect.
As for the digital outputs... if you are going to go digital you need high quality dacs... and I wouldn't exactly call the electronics inside these machines... "high quality"
You still haven't said what FYT you owned, context/specifics is really important.
Click to expand...
Click to collapse
I haven't owned one.... but that's my point with your argument... you haven't owned a PX6. You are comparing PX5 technology to the FYT. A cardboard box probably has higher quality and better sound than the PX5.
I have looked at FYT and the lack of input/output ability is the dealbreaker for me. To me these things aren't just Head units. They are central control centers... or at least that's what I bank on them for. If I was looking for a typical head unit I would go with Pioneer or Kenwood.
Bob_Sanders said:
Well... that's exactly what I am saying. Because of the dedicated inputs I don't have to use up my USB inputs, or my AUX inputs. I can use those for other things (which I do). Also, the supplied software is completely built around those inputs. The software knows exactly where to go. The TV module for example is automatically turned on/off, and tuned up when I bring up the TV app. It all operates in one smooth motion. The FYT units are just plain lacking in this respect.
As for the digital outputs... if you are going to go digital you need high quality dacs... and I wouldn't exactly call the electronics inside these machines... "high quality"
I haven't owned one.... but that's my point with your argument... you haven't owned a PX6. You are comparing PX5 technology to the FYT. A cardboard box probably has higher quality and better sound than the PX5.
I have looked at FYT and the lack of input/output ability is the dealbreaker for me. To me these things aren't just Head units. They are central control centers... or at least that's what I bank on them for. If I was looking for a typical head unit I would go with Pioneer or Kenwood.
Click to expand...
Click to collapse
I think I was highly skeptical like you initially, the chinese origin headunits appear to be largely copies and reuse, with little improvements between generations. I was surprised at just how good, at least my unit is.
Disappointing you couldn't find an FYT unit that meets your needs, they really are great.
At least the FYT unit I have, which is an YIN 53 / Mekede has inputs you mention. It's also listed on the schematic diagram obtained from 4pda.
Regarding the optical output, consider optical provides a multichannel noise immune method to connect a power amp via a single "cable."
Don't forget the MCUs on the MTCx platform are the same between processors, also bugs are widely reported in the MTCD forums, including PX6.
Maybe we agree to disagree.
marchnz said:
Disappointing you couldn't find an FYT unit that meets your needs, they really are great.
Click to expand...
Click to collapse
Disappointing to this point anyway.... they'll probably come around though in time.
I have owned several Joying units over the last 5 years or so, with generally good experiences. Last July/Aug I installed an SC 9853i in my Kluger/Highlander.
Recently a couple of things have gone pear shaped.
1) The google play store needs "uninstall updates" to function (had this with the older devices as well)
2) Waze and google maps are "freezing" sometimes very quickly sometimes after an hour.
3) The built in 4G has disappeared and I now only get 3G/H+ (this is subsequent a firmware update, which installed older modem firmware)
I have been unable to resolve these issues with Joying unfortunately.
They (Joying) were very good in the past sending me a new unit when the screen got a white ring around it, but really have had no luck with them resolving these issues.
I would probably buy a new device off them, but not the same device, the only problem is their website doesn't really have detailed enough information to make an assessment/comparison of the underlying hardware in each of their different models.
Found yet another reason to buy an FYT 7862UIS unit - Bluetooth Low Energy support.
My unit seamlessly connects to my Valentine One gen 2 radar locator. Every time. No hiccups, or pairing required.
dbmgreen said:
I have been unable to resolve these issues with Joying unfortunately.
Click to expand...
Click to collapse
Sorry for going slightly off thread topic...
Did you try a reset? and then a firmware reload/update?
I had your first problem until I wiped the system and flashed the latest firmware (which was the same)
The apps freezing might indicate a temperature issue. See if it runs warm/hot?
I never used the 3g 4g module since I hotspot.
Icefeldt said:
if you are satisfied with your decision and if you would buy it again?
Click to expand...
Click to collapse
Yea. I'm on my 2nd joying for my 2010 Rav4. I highly recommend getting one with buttons/knobs. Its very annoying to change volume by screen touching (even if you have steering controls). It seems the devices go thru these rounds of improvement that go like
Version 1 : great new screen, no buttons, no knobs
Version 2 : same new screen, touch buttons
Version 3 : same new screen, knobs and actual buttons
My only gripe is lack of customization of radio app, and the icons on the launcher have stupid large borders (wish the app icon was simply displayed)
I think they are coming out with a whole new ui
forgivegod said:
Sorry for going slightly off thread topic...
Did you try a reset? and then a firmware reload/update?
I had your first problem until I wiped the system and flashed the latest firmware (which was the same)
The apps freezing might indicate a temperature issue. See if it runs warm/hot?
I never used the 3g 4g module since I hotspot.
Click to expand...
Click to collapse
Nah all good, have reset a number of times, and reloaded every version of firmware available to me. I only got the device in 2020 AUG, I feel like it may have had slightly different firmware on it (to what is available for download) based on the screenshots I sent to Joying when I was initially trying to troubleshoot. Yes even wiped completely twip_all.
I think its is running hot 70-90 degrees but this is a recent problem, it ran fine for 12 months.
We use (did use) 4G module for a hotspot in the car for all the passengers, it had worked seamlessly up until joying sent me their firmware
I wish I could identify what model they are selling for the 2018 Highlander, I would just buy a new one. I do like their product, and I'm currently 1 of three dodgy products with no resolution --- Chinese vendors
marchnz said:
Found yet another reason to buy an FYT 7862UIS unit - Bluetooth Low Energy support.
My unit seamlessly connects to my Valentine One gen 2 radar locator. Every time. No hiccups, or pairing required.
Click to expand...
Click to collapse
What "brand" are you looking at
dbmgreen said:
What "brand" are you looking at
Click to expand...
Click to collapse
ro.build.fytmanufacturer=116
MCU = NOR
Seller was Mekede. There is no "brand" on Android head units, only factory. You would be taking a gamble buying from any seller without asking for screenshots of the system info, they might ship a unit from any number of factories and therefore variants.
Question to the Joying owners in here ... Some people were complaining about the old Intel-based chip units from Joying having buggy firmware, I haven't really read this about the new UIS-based units. Did you notice noteworthy bootloops, bugs etc.?
Hi there,
Recently I bought a PX4 to replace my PX5 radio in my car, a Fiat Punto Evo. The PX5 did work as it should, but I was looking for something new and fresh. Since the PX4 is based on newer technology, and Android 11, I thought this was a step forward. This is an Isudar unit by the way.
However. I noticed the headunit isn't that great. I usually use 2-3 apps (Spotify, Google Maps/Waze and Flitsmeister, a navigational tool for speedtraps and so on) and the radio doesn't perform well when I have these apps opened. Google Maps crashes a lot of times, Flitsmeister freezes and when I want to go back to the homescreen, the screen flickers a few times back and forth. Also, it does reboot all of a sudden.
There is not a possibility to flash or update it since there is zero to little knowledge of the PX4. I'm thinking of the following options:
- Buy a PX6 board and swap it in
- Buy a PX6 headunit
- Maybe there is an alternative
What is a reliable brand in this sector? I see a lot of brands but I don't see the difference...
Cheers,
Jacco
There is no px4 and you don't say if it really is an MTCD type because you haven't posted enough information such as MCU type.
Brands mean little to nothing as the all sell from various factories and are no real "brands" for these Chinese units, only factories.
You want a 7862UIS FYT (4gb+) unit such as what mekede / navifly sell (type 116) These are much less buggy than mtcd type units and you don't need hacky modded firmware to make them work.
Well, there is, it's a RK3566 based one, MTCH_GS_V3.80_3.
https://nl.aliexpress.com/item/1005003076011564.html?spm=a2g0o.productlist.0.0.3d87355fOPaJSb&algo_pvid=d3ae804c-2a61-4fd9-80ae-8d3578cec8c8&algo_exp_id=d3ae804c-2a61-4fd9-80ae-8d3578cec8c8-16
I will look into those, thanks for that one!
Fryslanboy said:
Well, there is, it's a RK3566 based one, MTCH_GS_V3.80_3.
https://nl.aliexpress.com/item/1005003076011564.html?spm=a2g0o.productlist.0.0.3d87355fOPaJSb&algo_pvid=d3ae804c-2a61-4fd9-80ae-8d3578cec8c8&algo_exp_id=d3ae804c-2a61-4fd9-80ae-8d3578cec8c8-16
I will look into those, thanks for that one!
Click to expand...
Click to collapse
Just for clarity, there is no PX4. The unit linked clearly lists PX6.
I no longer recommend the MTCx platform.
marchnz said:
Just for clarity, there is no PX4. The unit linked clearly lists PX6.
I no longer recommend the MTCx platform.
Click to expand...
Click to collapse
Well, actually the details list two options, a PX4 one and a PX6...
But @marchnz is correct in both accounts
1) PX4 is something this guys invented, and is not widely used/accepted (yet). Regarding the CPU they are using, seems to be a slightly improvement/update to the PX5... but very slight improvement (newer tech, more speed per CPU, but less CPUs overall)
2) Even if you go to PX6, those CPUs are old compared to 7862UIS... so buying today a PX6 would be a bad investment. If you really want to reuse the unit and only invest on a CPU board, the only option will be to wait for those manufacturers to adopt the latest chip RK3588 (which has a version RK3588S that looks a lot like a car-oriented chip, even with a CAN bus interface). Of course, you might wait for months and there is no assurance that your MTC-H mainboard will be compatible with it.
By the way, PX5 and PX30 were real Rockchip car-oriented official products. I have never seen any Rockchip original document referring to RK3399 as PX6. I only see this nomenclature on the Android-Auto chinese sites. So, don't kill us if in a few weeks every chinese vendor starts to call RK3566 as PX4
Indeed, I thought the PX4 would be a slight improvement because of the newer technology, but the opposite is true, it's horrendous.
No, a PX6 would be a bad choice. the 7862UIS option would be great but I see nothing which would fit in my car, and waiting for the RK3588 could last a while with the current chip troubles.
I'm not going to kill anybody, no troubles
Fryslanboy said:
Indeed, I thought the PX4 would be a slight improvement because of the newer technology, but the opposite is true, it's horrendous.
No, a PX6 would be a bad choice. the 7862UIS option would be great but I see nothing which would fit in my car, and waiting for the RK3588 could last a while with the current chip troubles.
I'm not going to kill anybody, no troubles
Click to expand...
Click to collapse
So, if not reusing the MCU is not a problem for you...what about looking for a 7862UIS with a screen that has the same physical size as your current unit?
All the plastic fascias/stereo-fronts are made (most probably) by the same factory, and then distributed to different radio-manufacturers. Its a very low margin manufacturing business that only works if you do runs with thousands of units produced... is not a business large enough to have multiple providers. So, most probably you will be able to take the fascia of your PX4 and adapt it to any unit (MTC or FYT) as far as the screens are the same size
Hey there!
I'm new to the Topic of Android Head Units, and currently looking to get one for my Kia Ceed SW from 2007 which doesn't even have Bluetooth right now, so i'm looking for some help here. My Budget is around 200-350€ max. and i'd like to get something which would work with my steering wheel buttons. I thought about getting a 7" Unit because i'm not sure if 10" would fit. Shipping from germany would be a + for me, so i don't have to wait long.
I thought about getting an RX6 so i could use the Hal9k stuff, because it looks nice, and i like switching firmwares from time to time. But at the moment everythings still completely open. Every opinion would be greatly apreciated.
Thanks in Advance,
Tho
Do consider a uis7862 FYT (e.g. as sold by navifly/mekede, not endorsing either) they are miles better than the MTCD based units while cheaper than even the most overpriced Dasaita MTCD. A bonus is they sound significantly better too.
You won't regret it, it's the software and the hardware improvements that make a huge difference.
Join us here: https://forum.xda-developers.com/t/...unisoc-ums512-q-a-mods-tips-firmware.4396339/
marchnz said:
Do consider a uis7862 FYT (e.g. as sold by navifly/mekede, not endorsing either) they are miles better than the MTCD based units while cheaper than even the most overpriced Dasaita MTCD. A bonus is they sound significantly better too.
You won't regret it, it's the software and the hardware improvements that make a huge difference.
Join us here: https://forum.xda-developers.com/t/...unisoc-ums512-q-a-mods-tips-firmware.4396339/
Click to expand...
Click to collapse
Hey there! Okay, sounds good. But where would i get a unit like that? I think all the ones from Amazon are MTCx ones.
Edit: I did some googleing and the ones from www.joyingauto.eu are not really declared which board it is. Or am i doing something wrong?