M307FNXXU2ASL2 and M307FXXU2ASL2 - Samsung Galaxy M30s ROMs, Kernels, Recoveries, & O

M307FNXXU2ASL2
https://androidfilehost.com/?fid=4349826312261689288
M307FXXU2ASL2
https://androidfilehost.com/?fid=4349826312261689290

How to flash without twrp

M307FXXU2BTC6 make mirror please.

Related

Clean Cricket Htc One SV Nandroid (2.04.1050.3)

idk if anyone would want this but here is a clean jellybean nandroid backup of a cricket wireless Htc One SV with newest update already applied. http://www.filefactory.com/file/5u395y1qavzr/Clean_JB_Crkt_2.04.1050.3.rar
Ok, i've downloaded this backup and made a zip file for flashing in recovery from it.
Credits:
- ironhide602 for the backup
- dsixda for his kitchen
Download:
JB_Crkt 2.04.1050.3_stock_odexed.zip
Notice:
As i don't have a cricket phone i could not test but one tester reported it's working.
Anyway, flash this on your own risk. Don't do this, if you are not experienced enough!
This files are for flashing in recovery.
I will not work on bugs, if you find some (as i could not test myself)!
Kernel source code can be found at htcdev.com.
How to install:
First of all: make a nand backup in recovery, so you can easily go back if you don't like it!!!
Download the zip file that match to your device and copy to sd card.
Wipe/format data/system/cache/dalvik cache, factory reset.
Flash the zip through recovery.
Htcdev.com unlocked users who are not S-Off have to extract boot.img from the zip file and flash it afterwards over fastboot with the command:
Code:
fastboot flash boot boot.img
Then reboot.
- There is no superuser/su inside, if you wanna root, flash superuser from here.
old.splatterhand said:
Ok, i've downloaded this backup and made a zip file for flashing in recovery from it.
Credits:
- ironhide602 for the backup
- dsixda for his kitchen
Download:
JB_Crkt 2.04.1050.3_stock_odexed.zip
Notice:
As i don't have a cricket phone i could not test but one tester reported it's working.
Anyway, flash this on your own risk. Don't do this, if you are not experienced enough!
This files are for flashing in recovery.
I will not work on bugs, if you find some (as i could not test myself)!
Kernel source code can be found at htcdev.com.
How to install:
First of all: make a nand backup in recovery, so you can easily go back if you don't like it!!!
Download the zip file that match to your device and copy to sd card.
Wipe/format data/system/cache/dalvik cache, factory reset.
Flash the zip through recovery.
Htcdev.com unlocked users who are not S-Off have to extract boot.img from the zip file and flash it afterwards over fastboot with the command:
Code:
fastboot flash boot boot.img
Then reboot.
- There is no superuser/su inside, if you wanna root, flash superuser from here.
Click to expand...
Click to collapse
Hellow , Please can u Upload this file in other server ill try multiple times
& stuck in the final byte .
Regards
I have no fast internet and i'm trying since days to upload a big file, so not before the other one is finished.
old.splatterhand said:
I have no fast internet and i'm trying since days to upload a big file, so not before the other one is finished.
Click to expand...
Click to collapse
sorry sorry ... not server ,,its my own pc,, ill try in other & everythin ok
thanks
Regards

[RECOVERY] GiONEE DREAM D1/GN878 CWM RECOVERY-6.0.3.0

DO AT ON YOUR RISK
Gionee Dream D1 TWRP-recovery-2.5.0.0-4.2 added on post#2
For rooting and recovery install procedure following guide from somberi.
http://forum.xda-developers.com/showthread.php?t=2254543.
download cwm recovery-6.0.3.0 image and install.
Download Link: http://d-h.st/67I
MD5 Checksum : 082fab1f11338d88fab56bd4e2239bd3
SHA256 Checksum: 0a4579f4a9f26904820cce3a10b74b232c7b8b5c4950ae3c24779733be8ea91c
it is updated and backward compatible.
Gionee Dream D1 TWRP-recovery-2.4.4.0
Gionee Dream D1 TWRP-recovery
thanks to the Master Shifu Javum,Master Shifu Michfood,yuweng for guide,tips,tools
All Bugs are removed
1. Take backup first..then go ahead.
2. If not works install previous recovery..and restore backup.
3. Report bug...help us to solve it..
--TWRP recovery 2.5.0.0 with 4.2 kernel--
--New Feature--
1. partition sdcard
2. Indian user can set time IST--+5:30
Download Link:GIONEE_TWRP_2500_42:good:
download link:GiONEE-2.5.0.0
MD5 Checksum: 46b1e1d99d995626be54885845ff1880
SHA256 Checksum: 8189c032dd85d055875bd5563b90c2e1bf08fffba10974ffae0c479841e2ee21
download link:GiONEE-2.4.4.0
MD5 Checksum: 7cf6064efd68c608bfe9cc410c391e56
SHA256 Checksum: c1431ebdd14ebe2df61ec0d86e2f50877fa0a967f75f63be0bc6cfc5d701a219
No Need To Change Your Recovery Partition Size
INSTALLATION GUIDE
1.Download recovery.img file from above link.
2.Flash it through SP flash tool.
3.Reboot.
4.take a twrp backup.
Works
- Everyting except Not Works
Not Works
This is a simple Mod. Help to improve it.
GiONEE stock rom Dream_D1_0101_V5101
Deodex, Rooted Gionee Dream D1 stock ROM Dream_D1_0101_V5101
Deodex
Odex, Rooted Gionee Dream D1 stock ROM Dream_D1_0101_V5101
Odex
Odex, Rooted Gionee Dream D1 stock ROM Dream_D1_0101_T5222
Dream_D1_4.2.1
Installation Instruction:
1. Download zip file.
2. Put it on root of sdcard.
3. Boot in recovery mode.
4. Select to Install zip file from SDCARD
5. Reboot when done.
deepak2111 said:
DO AT ON YOUR RISK
For rooting and recovery install procedure following guide from somberi.
http://forum.xda-developers.com/showthread.php?t=2254543.
download cwm recovery-6.0.3.0 image and install.
Download Link: http://d-h.st/jTx
it is updated and backward compatible.
Click to expand...
Click to collapse
Before I flash, I wanted to confirm with you. Do I need to resize the partition? Or will it work with my default partition size?
---------- Post added at 03:57 PM ---------- Previous post was at 03:57 PM ----------
deepak2111 said:
Currently working on TWRP Recovery.
Click to expand...
Click to collapse
I would be a happy soul if I could see TWRP running on this device. Thank you for putting your efforts. :good::good::good:
RickyGoldsmith said:
Before I flash, I wanted to confirm with you. Do I need to resize the partition? Or will it work with my default partition size?
---------- Post added at 03:57 PM ---------- Previous post was at 03:57 PM ----------
I would be a happy soul if I could see TWRP running on this device. Thank you for putting your efforts. :good::good::good:
Click to expand...
Click to collapse
please redownload recovery image if you have downloaded it earlier.
earlier image was corrupted. uploaded new one after check it.
you can install it.
You need not to resize partition for this cwm recovery image.
deepak2111 said:
please redownload recovery image if you have downloaded it earlier.
earlier image was corrupted. uploaded new one after check it.
you can install it.
You need not to resize partition for this cwm recovery image.
Click to expand...
Click to collapse
Thanks for the information. Could you please add MD5 and SHA256 checksums to the initial post? That helps a lot.
The one I just downloaded has an MD5 sum: 082fab1f11338d88fab56bd4e2239bd3
RickyGoldsmith said:
Thanks for the information. Could you please add MD5 and SHA256 checksums to the initial post? That helps a lot.
The one I just downloaded has an MD5 sum: 082fab1f11338d88fab56bd4e2239bd3
Click to expand...
Click to collapse
checksum added in first post. thanks
Thankya
Thanks Bro. Good Job. :good:
deepak2111 said:
Gionee Dream D1 TWRP-recovery-2.4.4.0
thanks to the Master Shifu Javum,Master Shifu Michfood,yuweng for guide,tips,tools
All Bugs are removed
1. Take CWM backup first..then go ahead.
2. If not works install CWM recovery..and restore backup.
3. Report bug...help us to solve it..
download link:GiONEE-2.4.4.0
MD5 Checksum: 7cf6064efd68c608bfe9cc410c391e56
SHA256 Checksum: c1431ebdd14ebe2df61ec0d86e2f50877fa0a967f75f63be0bc6cfc5d701a219
No Need To Change Your Recovery Partition Size
INSTALLATION GUIDE
1.Download recovertwrp-2.4.4.0.img file from above link.
2.Flash it through SP flash tool.
3.Reboot.
4.take a twrp backup.
Works
- Everyting except Not Works
Not Works
This is a simple Mod. Help to improve it.
Click to expand...
Click to collapse
Thanks @deepak2111, your work will save my phones volume and power buttons,
have you managed time to look in 4.2*.
Tonight I will.....4.2
Sent from my Dream_D1 using xda app-developers app
Great work using it with TWRP manager.

[Q] Updating PhilZ Touch Recovery

Hi,
I am running PAC-ROM | All-in-One-ROM [4.3 / 4.2.2 ] on my 5110 with Philz Touch 5.03.7 (Base version 6.0.3.2) but want to install the following Rom:
[P51xx][5.x] CyanogenMod (CM12 / CM 12.1).
But I believe I need to update my Recovery to install a LP rom.
I have gone through the [GT-P51XX] TWRP | PhilZ Touch | CWM Thread (http://forum.xda-developers.com/showthread.php?t=2548476) to try to understand what I need to do but I am still unsure of exactly what I need to do.
I've located the files for the new recovery from (https://www.androidfilehost.com/?w=files&flid=25711) but I am unsure whether I flash the md5 file or the Tar file (or both)? Also, can I flash this new recovery from the Recovery I have currently got.
Any help with this would be appreciated as I haven't messed about with ROMs for over a year so I am a bit (a lot) rusty at the moment.
Thanks in advance
TWRP recovery is better and more intuitive.
Grab the latest zip file, not tar.md5 file, from here :
https://www.androidfilehost.com/?w=files&flid=25708
and flash it directly from your PhilZ recovery.
Cool, cheers. Do I need to factory reset device before flashing that?
Thanks again
Just follow the OP instructions :
Installation
First time installing CyanogenMod to your Galaxy Tab 2, or coming from another ROM:
Read the official wiki
Copy GApps and CM-Rom ZIPs to your internal SDCard
Boot into Recovery
wipe data factory reset
wipe cache
wipe dalvic cache
format system
Flash CM-Rom ZIP from internal SDCard
Flash GApps zip from internal SDCard
Reboot
Don't restore system data using Titanium Backup!
Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Click to expand...
Click to collapse
I was ok with the rom instructions, I couldn't find any instructions about flashing the recovery.
I just went for it so all sorted now, thanks for help.
Sent from my C6603 using Tapatalk

mate9 rom build213

hellow every body,i find cn costum but cant download it.every body can help?
rom link
http://club.huawei.com/forum.php?mod=viewthread&tid=12911793&
download link
http://pan.baidu.com/s/1c19L2r2
i download it and its rar file with img files.every body know how we can flash it
Guide mate 9 flash is in link download (you must use google translate for read).
You must flash rom 2 time.
1.M9_B213_Kangvip_flash_v2.rar (flash via pc (run.bat))
2.M9_B213_Kangvip_dat_v2.zip (flash via twrp)

Question I need to go back to stock kernel

Anyone have vendor_boot, dtbo and boot.img from 11.2.9.9 le25aa ?. Install a custom kernel and I need to go back to stock
Just use oxygen updtaer to download full zip and do a local install. Flash magisk to alternate partition and reboot.
gorilla p said:
Just use oxygen updtaer to download full zip and do a local install. Flash magisk to alternate partition and reboot.
Click to expand...
Click to collapse
Install the Arter kernel. And now I get an error when I want to update that way. So I need to go back to stock rom.
Do you know any way to do that?
Partigiano0105 said:
Install the Arter kernel. And now I get an error when I want to update that way. So I need to go back to stock rom.
Do you know any way to do that?
Click to expand...
Click to collapse
Shouldn't be flashing a kernel without proper backups first. You need stock untouched boot.img and vendor_boot
mattie_49 said:
Shouldn't be flashing a kernel without proper backups first. You need stock untouched boot.img and vendor_boot
Click to expand...
Click to collapse
how can I do that?
You can download the zip file containing th full update of your version in a thread here, them using the payload dumper tool you extract all img files inside
I don't know how to edit so more details about this process:
1. Go to sticked thread Repo of oos builds
2. Download the zip file of the firmware you are using
3. Download the payload dumper here: https://androidfilehost.com/?fid=818070582850510260
4. Once extracted extract the payload.bin from firmware zip into payload_input directory
5. Launch payload_dumper.exe
6. Process take few minutes depending on your computer, result img files are stored in payload_output directory
7. Have fun with your img file

Categories

Resources