Database Info

help please i have no root access on a rooted galaxy note

hello would you please help me,
i have a galaxy note gt-i9220 but i have root it along time a go soo i can use google services and i have change the name to n7000 soo i can instal Ultimate_N7000_LT4_JB_4.1.2_v6 but after that i instaled another rom build number is ILLUSION_N7000-USERDEBUG 4.3JSS15Q and i want to get back to the ultimate rom but when i go to recovery SD card wont open in only show 3 files , and superuser said : gaining root access fail and root cheker said the device is not rooted i dont know what to do i hate this rom PLEASE HELP ME

adilharrak said:
hello would you please help me,
i have a galaxy note gt-i9220 but i have root it along time a go soo i can use google services and i have change the name to n7000 soo i can instal Ultimate_N7000_LT4_JB_4.1.2_v6 but after that i instaled another rom build number is ILLUSION_N7000-USERDEBUG 4.3JSS15Q and i want to get back to the ultimate rom but when i go to recovery SD card wont open in only show 3 files , and superuser said : gaining root access fail and root cheker said the device is not rooted i dont know what to do i hate this rom PLEASE HELP ME
Click to expand...
Click to collapse
if you have philz recovery then click auto root or download and flash the latest supersu from chainfire's thread and flash it from recovery, but why do you need root access to flash rom? you just need a custom recovery

eatsleep said:
if you have philz recovery then click auto root or download and flash the latest supersu from chainfire's thread and flash it from recovery, but why do you need root access to flash rom? you just need a custom recovery
Click to expand...
Click to collapse
no i got CWM-based recovery v6.0.3.4 , when i go to [instal zip] and [choose zip from sdcard] dosent show my files it shows only
-0
-clockworkmod
-obb/
thats it and all of them ar empty , and whene i go back an click on reboot system now it says [root access possibly lost. fix? i hit yes and no change. its make me insane

adilharrak said:
no i got CWM-based recovery v6.0.3.4 , when i go to [instal zip] and [choose zip from sdcard] dosent show my files it shows only
-0
-clockworkmod
-obb/
thats it and all of them ar empty , and whene i go back an click on reboot system now it says [root access possibly lost. fix? i hit yes and no change. its make me insane
Click to expand...
Click to collapse
It's probably in 0/ folder....
---------- Post added at 08:06 PM ---------- Previous post was at 08:05 PM ----------
eatsleep said:
It's probably in 0/ folder....
Click to expand...
Click to collapse
You may try mounting the sd card.........
Just a wild guess, do search on it before doing it

eatsleep said:
It's probably in 0/ folder....
---------- Post added at 08:06 PM ---------- Previous post was at 08:05 PM ----------
You may try mounting the sd card.........
Just a wild guess, do search on it before doing it
Click to expand...
Click to collapse
This --> http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000/philz_touch_6.19.3-n7000.zip is the latest PhilZ advenced CWM for you N7000. download the zip file and flash it via your installed recovery.
Then install SuperSU 1.93 again

eatsleep said:
It's probably in 0/ folder....
---------- Post added at 08:06 PM ---------- Previous post was at 08:05 PM ----------
You may try mounting the sd card.........
Just a wild guess, do search on it before doing it
Click to expand...
Click to collapse
well the 0/ folder is emty how i can flash philZ recovery and i can get an access to my sdcard?

adilharrak said:
well the 0/ folder is emty how i can flash philZ recovery and i can get an access to my sdcard?
Click to expand...
Click to collapse
You're familiar with using "Odin" to flash a firmware/recovery?

LS.xD said:
You're familiar with using "Odin" to flash a firmware/recovery?
Click to expand...
Click to collapse
i always use it when i need it but would you help me to show me how to flash philZ recovery using odin ? please

adilharrak said:
i always use it when i need it but would you help me to show me how to flash philZ recovery using odin ? please
Click to expand...
Click to collapse
sure. just a second i creat a short guide with picture
for now you can download:
Odin v 1.85
PhilZ CWM 6.9.13
How to:
-Close every KIES process or better uninstall it.
-But make sure driver is installed properly Letest USB drivers (Only use if you have not installed a working driver)
-Extract Odin to your desktop
-Put "philz_touch_6.19.3-n7000.tar.md5" in the "Odin" folder
-Start Odin
-Connect your Galaxy Note to your computer in "DOWNLOAD" mode
and make sure that everything is set as in my picture

press "START"
If your Galaxy Note decides to scream and run away then its not my fault.
This should be safe BUT its you modify the Galaxy Note.

Carliv Touch Recovery (CTR) v2.4 For MMX A110/Noir Q10/Cynus T2

Hi All,
I have ported the latest version of CTR 2.4 for our device with Aroma File Manager Support.
BUGS:-
Do report back if you found any. Will try to resolve it soon.
Thanks
Download: Download the recovery from the Download Tab
Installation:
1. You can install through the MobileUncle (Ensure to rename the file to recovery.img and put in the root of the SD Card before using the mobile uncle app)
2. SP Flash Tool.
XDA:DevDB Information
Carliv Touch Recovery (CTR) v2.4, Tool/Utility for the Micromax A110
Contributors
AndroTech
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-06-10
Created 2014-06-10
Last Updated 2014-06-15

Reserved
-: Credits Section :-
1) Master @carliv
2) Master @yuweng
3) Master @michfood
4) @Koush Dutta
5) @amarullz - For AROMA FM.

Reserved

Changelog Please....

Where is download link?
Sent from my A116 using Tapatalk

In the download section at the top bar click on download there you will get the download link

Where is download section i can't see #3 is it but it doesnt show anything
Sent from my A116 using Tapatalk

dhirajahuja432 said:
Where is download section i can't see #3 is it but it doesnt show anything
Sent from my A116 using Tapatalk
Click to expand...
Click to collapse
If you are using mobile to access this then it will not show. You have to use desktop to see the download link.

Ok
Sent from my A116 using Tapatalk

I can see there are 20 downloads so far but there is no feedback provided

not able to flash recovery mobile uncle tools
i nearly flashed 3 times but it boot in to 2.2
i flashed twrp reovery by bindadas it boot to twrp recovery
why not able to flash 2.4
pls help

gsunil said:
not able to flash recovery mobile uncle tools
i nearly flashed 3 times but it boot in to 2.2
i flashed twrp reovery by bindadas it boot to twrp recovery
why not able to flash 2.4
pls help
Click to expand...
Click to collapse
Have you renamed the recovery to recovery.img and put it in the root of SD Card?
Anyone else facing this issue?

It detect recovery image after flashing boot in to recovery mode it ask I give s but it boot in to 2.2 old recovery but twrp recovery flashed no problem
---------- Post added at 05:06 PM ---------- Previous post was at 04:47 PM ----------
After renaming successfully flashed recovery post review after usage

The best feature in ver 2.4 I found is the backup format. If you select tag+gzip the back-up size is reduced to 2/3 if only tar is used.

Let me try and review asap...
Edit :
It works fine. Many thanks for latest CTR recovery

AndroTech said:
Have you renamed the recovery to recovery.img and put it in the root of SD Card?
Anyone else facing this issue?
Click to expand...
Click to collapse
I am also facing same...Please look into it.

Pls rename the file to recovery.img & place in root of SD card before using mobileuncle app.

AndroTech said:
Pls rename the file to recovery.img & place in root of SD card before using mobileuncle app.
Click to expand...
Click to collapse
Previously my Rom backup size is 2.5 gb now my Rom backup size is 1.40gb good recovery

The Recovery is working perfectly fine no problems and it is getting flashed by Mobile uncle tool.

AndroTech said:
Pls rename the file to recovery.img & place in root of SD card before using mobileuncle app.
Click to expand...
Click to collapse
Thanks! It is working perfect.

Xolo Q3000 - recovery collection

XOLO Q3000 RECOVERY COLLECTION​
Hiii All XOLO Q3000 users,
I bring to you collection of recoveries for our beloved XOLO Q3000.
STOCK RECOVERY​
Jelly Bean
JB 4.2.1 S003
JB 4.2.1 S011
KitKat
Kitkat 4.4.2 S007 version
======================================================================================================
CUSTOM RECOVERY FOR ANDROID JELLY BEAN​
Carliv Touch Recovery BASED​
Carliv Touch Recovery v2.1
Carliv Touch Recovery v2.2
Carliv Touch Recovery v2.4
Carliv Touch Recovery v2.5
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​ClockworkMod- CWM- BASED​
CWM 5.5.0.4
CWM 6.0.2.8
CWM 6.0.3.2
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​TeamWin Projects - TWRP BASED​
TWRP 2.7.1.0
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​PhilZ Touch - TWRP BASED​
PhilZ Touch 6.4.7.7
====================================================================================================​
CUSTOM RECOVERY FOR ANDROID KITKAT​
ClockworkMod- CWM- BASED​CWM based 6.0.2.8
ClockworkMod 6.0.3.3 Recovery (CWM) Non-touch
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
Carliv Non-Touch Recovery BASED​
Modified Carliv CWM (non-touch) CWM 6.0.4.4
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
Carliv Touch Recovery BASED​
Carliv Touch recovery 3.0
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
PhilZ Touch BASED​[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0 aroma fixed
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1 aroma fixed
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
TeamWin Projects - TWRP BASED​
TWRP 2.7.0.0
TWRP 2.8.0.0
TWRP 2.8.1.0
TWRP 2.8.2.0
TWRP 2.8.4.0
TWRP 2.8.4.0 rev 2
TWRP 2.8.5.0
====================================================================================================​
So dont get confused which one to use from all above.
THE BEST CUSTOM RECOVERY​
For JELLY BEAN ​Carliv Touch Recovery v2.5
For KitKat- use anyone​
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1
TWRP 2.8.5.0
Test and report.
If you have any other working recovery please PM me.
HOW TO USE/FLASH CUSTOM RECOVERY.​
CREDITS​Credit goes to all involved in making them. (CWM team, TWRP team, PhilZ team, Carliv,yuweng)
hadiyalkishan- for JB & KK stock & testing
m0han - for ctr 2.5, for JB testing
rufus.reynolds - for KK testing
Jagadish-ravi - for JB & KK testing
vijay jay - for TWRP 2.7 testing
@Santhosh M - for TWRP 2.8.1.0
Thank You... Share Your Views...​

Many users dont know how to flash a custom recovery.
so i am making this thread which will guide u to flash a custom recoveries present in above thread.
​
If ur phone is rooted (supersu/superuser app is present in app drawer).
Method 1
Download and install flashify app from playstore
download custom recovery from above post.
Open flashify.
Backup current recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
goto flash
recovery image
Choose downloaded recovery.img (it may have different name)
Now u can reboot.
To boot into recovery
press vol up button, keep it pressed.
press power on button till u see boot logo.
release power button.
after going into recovery release vol up button.
Method 2
Mobile uncle tool
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
If ur phone is not rooted
What's needed:
USB data cable
MediaTek USB VCOM drivers thanks to @smokerman sir
SP Flash Tool
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
Install spflash tools
download recovery.
rename it to recovery.img
download scatter file.
Put scatter file and recovery image in same folder.
open SP Flash Tool, then click Scatter-loading button to load the scatter file
(MT6589_Android_scatter_emmc.txt) and ignore any message that may appear.
The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.
Press download button.
attach ur switched off phone with usb cable.
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
PLEASE PRESS THANKS BUTTON IF THIS HELPS​

This just keeps getting better and better.....thanks millions....Avi....well collated recovery thread.....its has everything we need....

Thanks for this post, man. I'll try the Stock Recovery for the OTA I've been getting since months. Because I've read somewhere that OTA only works on Stock recoveries.
Edit: The Stock recoveries here are S003 and S011. Mine is S009. Which one should I try?
Sent from my Q3000 using XDA Premium 4 mobile app

Vineet3 said:
Thanks for this post, man. I'll try the Stock Recovery for the OTA I've been getting since months. Because I've read somewhere that OTA only works on Stock recoveries.
Edit: The Stock recoveries here are S003 and S011. Mine is S009. Which one should I try?
Sent from my Q3000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Save ur recovery and try S011.:good:

CTR 2.5 can be used to flash both JB & KK ROMs.
but backup & restore is not possible.
Thanks to @Jagadish-ravi

stuck at download mode
i have kitkat 4.4.2, Kernel 3.4.67, software version s003_15072014, non-rooted
i have installed mtk vcom, sp flash and tried to port cwm, but sp flash tool used to stuck at download mode....any help?
i have attached the screeshot for the reference....
Thanks in advance...

Sagar_Patel said:
i have kitkat 4.4.2, Kernel 3.4.67, software version s003_15072014, non-rooted
i have installed mtk vcom, sp flash and tried to port cwm, but sp flash tool used to stuck at download mode....any help?
i have attached the screeshot for the reference....
Thanks in advance...
Click to expand...
Click to collapse
First thing is
Please dont quote whole post.
it is posted by me only and just few post above on same page.
Ur screenshot is very poor cant see anything please re upload with good resolution.
after pressing that download button u need to connect ur phone in switched off condition.
r u doing this as instructed.??
Please explain the process ur following?
Ur porting cwm means??
Or u mean to say flashing/installing??
which cwm ur using please specify.?

ow! sorry for the way i had posted the thing but thanks for the way you replied- it was quite Quick!!
so, herewith i have attached the zip file (for the better resolution) and jpg file as well (size i could manage within the limitation of this forum) of screenshot where i stuck...View attachment 083.zip
yes, i connected my phone in switched off condition after pressing download button...
i had followed exactly the same way as you have explained for the non-rooted device....
and it was newbie thing that i had written "porting cwm" instead of "installing/flashing cwm"...yes, i was trying to flash/install cwm...
recovery i tried to install is:- [CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
Thanks for helping me...

sorry i had just forgotten to mention the scatter file i had used....obviously yes, it is the same as you have uploaded as:-
avi3230 said:
Install spflash tools
download recovery.
rename it to recovery.img
download scatter file.
Put scatter file and recovery image in same folder.
open SP Flash Tool, then click Scatter-loading button to load the scatter file
(MT6589_Android_scatter_emmc.txt) and ignore any message that may appear.
Click to expand...
Click to collapse
however, i had to rename it as MT6589_Android_scatter_emmc.txt as the scatter file i had downloaded had have the name as attachment.php
also note that i had put zip file of recovery [CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0 and that scatter file in same folder as well....
kindly check if i had done any mistake there...
i have attached the scatter file to which i had renamed...

sp flash tool stuck at download mode?
ok may be i have found the mistake while posting just above the procedure i had done!!!
sp flash tool stuck at the download mode may be because i had done mistake (if it is?! ok, i cant confirm it until i can get xolo q3000 back to me or until someone here can confirm that yes, this was the mistake) as below:_
i had downloaded zip file of recovery
then i had downloaded scatter file of xolo q3000 as mentioned in my previous post
i had renamed the scatter file i had downloaded as MT6589_Android_scatter_emmc.txt as the scatter file i had downloaded had have the name as attachment.php (may be silly newbie thing here!!!)
i had put both those files in same folder
and did rest of the procedure as mentioned by avi3230 (OP) here in same thread for non-rooted xolo q3000 just a few posts above...
...and what should i have done?
i should have downloaded only the zip file of desired recovery and then if i extracted it, i could find that there are all the necessary files including recovery.img and scatter_file within the extracted folder!!!
i would like to attach screenshot of wrong thing i had done:- image named as "wrong"
and what i should have done is may be here:- image named as "may be"
i think i was trying to install zip file instead of recovery.img that should be there in extracted folder of recovery.zip along with the scatter_file as well...so, here now i have got where and why i had confused
Put scatter file and recovery image in same folder.
Click to expand...
Click to collapse
ok, if zip file of recovery has properly zipped, has properly downloaded and if it has properly extracted then you should find both the recovery.img and scatter_file within extracted folder....if not so, then you should put (get together) the scatter file and recovery image in "same folder" means in extracted folder....
confused? then i can only say sorry for my english but why i had posted the whole thing here? may be because someone can find that what kind of silly things those can be done by newbies....and if so, they can help....

Sagar_Patel said:
ok may be i have found the mistake while posting just above the procedure i had done!!!
.
Click to expand...
Click to collapse
OK dont worry about ur English or anything wrong u doing.
just follow these steps
this is considering ur running kitkat on ur phone (S003 or S007 build no)
download
1. SP_Flash_Tool
2. philz recovery - this or this
3. drivers - from here
extract drivers folder- mtkusball 0.9.2
open smartphone driver folder - x86/x64 according to ur windows os and install drivers.
or just select from autoinstall folder
connect ur phone in switch off condition to pc.
when asked fro drivers use MT65xx preloader drivers.
when u connect switched on phone and if asked for drivers use - android winusb drivers.
(please check in device manager after connecting ur phone in each case whether drivers are installed or any red triangle is ther)
restart ur computer.
extract sp tools in folder
extract philz recovery in a folder (it is in 7z or rar format just extratc in folder in winrar)
in philz folder u have scatter file, recovery.img boot.img and lk,bin files
start sp flash tools
select scatter loading
select scatter file from philz folder
deselect uboot and bootimg
press download button
connect ur switched off phone to usb cable.
flashing will be done
confirmed by green circle.
boot in recovery by pressing power + vol up button.
Reply if any issues.

avi3230 said:
OK dont worry about ur English or anything.....
....Reply if any issues.
Click to expand...
Click to collapse
just to add.... tip1: use usbdeview (g00gle) to remove all usb devices before adding your mobile device.
tip2 (based on my experience): try a previous (older) clean version of w!nd0ws also before giving up.

avi3230 said:
TeamWin Projects - TWRP BASED
TWRP 2.7.1.0
PhilZ Touch - TWRP BASED
PhilZ Touch 6.4.7.7
THE BEST CUSTOM RECOVERY
For JB
Carliv Touch Recovery v2.5
For KK
[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
Click to expand...
Click to collapse
please do a twrp that'd work flawlessly on both jb & kk. thanks.
i suppose you're aware of this.

m0han said:
please do a twrp that'd work flawlessly on both jb & kk. thanks.
i suppose you're aware of this.
Click to expand...
Click to collapse
Yeah already seen that no support for philz now.
TWRP is bigger in size and u need to change partition size of recovery.
which is another headache for TWRP.
I already have it but again u need to flash whole stock rom again as whole
preloader boot recovery will change.

avi3230 said:
....TWRP is bigger in size and u need to change partition size of recovery.....
....I already have it but again u need to flash whole stock rom again as whole preloader boot recovery will change.
Click to expand...
Click to collapse
is it fully working on both bases - jb and kk? does it allow jb/kk rom switching? what are the drawbacks of flashing whole stock rom again?
what if we make full backup of data (call log/sms/mms/dictionary etc.) and also apps+apps-data using my backup app......
....... - can those be restored in the new setup and be up & running? if so, i don't foresee much troubles. do you?
you being much more experienced, please elaborate. thanks.

m0han said:
is it fully working on both bases - jb and kk? does it allow jb/kk rom switching? what are the drawbacks of flashing whole stock rom again?
what if we make full backup of data (call log/sms/mms/dictionary etc.) and also apps+apps-data using my backup app......
....... - can those be restored in the new setup and be up & running? if so, i don't foresee much troubles. do you?
you being much more experienced, please elaborate. thanks.
Click to expand...
Click to collapse
As TWRP is larger in size most of the time it wont boot in recovery.
also backing up of recovery wont work on 7mb recovery partition in any cwm based recovery.
So i feel we should stick to philz.

avi3230 said:
.....i feel we should stick to philz.
Click to expand...
Click to collapse
just in case you haven't seen this yet. this too.
wish you (or someone else) can do some magic!

m0han said:
just in case you haven't seen this yet. this too.
wish you (or someone else) can do some magic!
Click to expand...
Click to collapse
I already have twrp made for device which is easy.
its size is more than 6mb which is the issue.
u can change size of recovery to almost 11mb but then it wont boot in recovery specifically on 6589 chipsets. then whats t use.
to make it boot in recovery we need to change values in preloader.bin which is difficult task.
if anyone working on ubuntu please make an kernel with drivers files from this source.
if using this kernel twrp is less than 6mb then everything will be fine.

CM11 RC 10 Status 0 Installation aborted

Hi guys
first of all: i am a total newb. Please be gentle :fingers-crossed:
I tried to install the latest build from here http://download.androidarmv6.org/_builds/beni/stable/
I did follow the beginners guide (partially because some links are dead).
What i did so far:
root (not from the beginners guide)
CWM 5 from the guide
then up to CWM 6.0.5.0 http://forum.xda-developers.com/galaxy-fit/orig-development/dev-cwm-recovery-upd-20140707-t2808196
wipe data / reset
wipe cache partition
wipe dalvik cache
install zip - > choose cm11 rc10 -> status 0 installation aborted
iSanecheck stated that the update-binary must be replaced: http://forum.xda-developers.com/showthread.php?t=2581415&page=41
But i have no clue how to do that. And i cant reply in this thread, because i am a total newb.
Please help me

Extract cm11-RC10 that u have. Then goto META-INF/com/google/android/update-binary & replace this update binary. Then zip this file & flash it.
Pls. see if this works for u coz me too want to flash latest cm11s but confused b/w TLS recovery mentioned on jenkins & this update binary thing.

I followed your instructions and tried it again. It now says Installation abort. Just without Status 0.

Try this by iSanechek:
iSanechek said:
use this recovery.img, maybe running.
I'm not responsible for anything you do with your beni
Click to expand...
Click to collapse
Pls. do post ur feedback.

Galaxy_Rohit said:
Extract cm11-RC10 that u have. Then goto META-INF/com/google/android/update-binary & replace this update binary. Then zip this file & flash it.
Pls. see if this works for u coz me too want to flash latest cm11s but confused b/w TLS recovery mentioned on jenkins & this update binary thing.
Click to expand...
Click to collapse
use this recovery. no need to replace binary. I checked, it works!
but
I'm not responsible for anything you do with your beni
Click to expand...
Click to collapse

Can i install it without terminal emulator? Just zip ? Because i cant boot to the system and i did not any backup. :x

rillrill said:
Can i install it without terminal emulator? Just zip ? Because i cant boot to the system and i did not any backup. :x
Click to expand...
Click to collapse
heh, only terminal, but give me a minute I'll think about .zip
Ps one moment, I'll check it works or not.))
Pss upload on google drive.)
CWM 6.0.5.3 in .zip

Thanks for the work!
I got it updated and it completed the installation of the latest nightly build (20140913). Thank you very much!

[ROM][OFFICIAL] LeEco X52x 5.9.023S

"I'm not responsible for any kind of damages done to your phone."
Pre-requisites:-
1. TWRP by codeworks
2. Notepad++
3. WinRAR
4. Make Backup
FAQ:-
Yes VoLTE is working.
Steps:-
1. Flash TWRP.
2. Edit updater-script.
a.Open the ROM zip in WinRAR.
b.Go to "META-INF/com/google/android".
c.Open updater-script in Notepad++.
d.Delete first two lines.
e.Click on Edit-EOL conversion-Windows(CR LF).
f.Click on Edit-EOL conversion-Unix(LF).
g.Save the changes.
3.Update the ROM zip for the changes.
4.Flash the new zip via TWRP.
5.Do extract boot.img from the zip and flash it via fastboot.
EUI
TWRP

@shivam321998 Is it Indian ROM or chinese release?

shivam321998 said:
"I'm not responsible for any kind of damages done to your phone."
Pre-requisites:-
1. TWRP by codeworks
2. Notepad++
3. WinRAR
4. Make Backup
FAQ:-
Yes VoLTE is working.
Steps:-
1. Flash TWRP.
2. Edit updater-script.
a.Open the ROM zip in WinRAR.
b.Go to "META-INF/com/google/android".
c.Open updater-script in Notepad++.
d.Delete first two lines.
e.Click on Edit-EOL conversion-Windows(CR LF).
f.Click on Edit-EOL conversion-Unix(LF).
g.Save the changes.
3.Update the ROM zip for the changes.
4.Flash the new zip via TWRP.
5.Do extract boot.img from the zip and flash it via fastboot.
EUI
TWRP
Click to expand...
Click to collapse
Make sure you flash No-encryption.zip for avoid Encryption of Data..
---------- Post added at 05:27 AM ---------- Previous post was at 05:26 AM ----------
sahil.kalka said:
@shivam321998 Is it Indian ROM or chinese release?
Click to expand...
Click to collapse
It's Chinese ROM..

sahil.kalka said:
@shivam321998 Is it Indian ROM or chinese release?
Click to expand...
Click to collapse
Chinese

What difference as compared to small eui?

anupam_aug15 said:
What difference as compared to small eui?
Click to expand...
Click to collapse
Same. This is actual Chinese ROM, and small eui is modified version of this by deleting all bloatware.
Small eui is better if you want eui ROM.

install over x527
If I install this rom over X527 will I lose B20 band as X520 doesnt support B20.

Home bottom long press search is working this rom
Sent from my Le X520 using XDA Free mobile app