Related
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
the_Storm said:
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
Click to expand...
Click to collapse
You forgott to flash the Kernel Use Fastboot for this.
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Open the Zip and Copy the boot.img to your pc
3)Put the ROM to sdcard
4)Boot your phone into fastboot (In Phone power off state press power + volume down)
5)connect to the pc via usb
6)use your commandline on pc + fastboot.exe and do the following command "fastboot flash boot <PathToTheBoot.ImgFromStep2>"
7)use your commandline on pc + fastboot.exe and do the following command "fastboot erase cache"
8)short press power on the phone to get in hboot
9)use volume down and then power to select "Recovery"
10)wipe data/factory reset
11)Flash rom
the_Storm said:
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
Click to expand...
Click to collapse
Thank you Bro it worked ansI was able to boot and see the home screen but now I have two problems ...
The first one I don't have any apps even google play.. .I think I have to install this Jellybean Gapps "http://jellybean.tom.gascoigne.me/gapps-jb.2.zip"
but I don't have an idea of how to install it like from recovery mood or something ... so how can I install GApps ...
The other problem is that Is there anyway to activate the audio... cause on my jellybean everything is working except the camera and the Audio.. I don't care about the Camera a lot now but the Audio.. I can't even make calls... so do you know anyway to activate the audio ??
the_Storm said:
Thank you Bro it worked ansI was able to boot and see the home screen but now I have two problems ...
The first one I don't have any apps even google play.. .I think I have to install this Jellybean Gapps "http://jellybean.tom.gascoigne.me/gapps-jb.2.zip"
but I don't have an idea of how to install it like from recovery mood or something ... so how can I install GApps ...
The other problem is that Is there anyway to activate the audio... cause on my jellybean everything is working except the camera and the Audio.. I don't care about the Camera a lot now but the Audio.. I can't even make calls... so do you know anyway to activate the audio ??
Click to expand...
Click to collapse
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
MarcoHD said:
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
Click to expand...
Click to collapse
Thank you body trying the latest version of the ROM now. I have a small question you said I should flash rom with Gapps to install google apps on the jellybean ROM. For me that doesn't make sense..I mean how the phone will distinguish between gapps and the jellybean ROM itself. Isn't it possible when I flash gapps it overwrites the jellybean ROM itself and I lost the ROM and the phone will not be working?
Again Thank you so much for your help
the_Storm said:
Thank you body trying the latest version of the ROM now. I have a small question you said I should flash rom with Gapps to install google apps on the jellybean ROM. For me that doesn't make sense..I mean how the phone will distinguish between gapps and the jellybean ROM itself. Isn't it possible when I flash gapps it overwrites the jellybean ROM itself and I lost the ROM and the phone will not be working?
Again Thank you so much for your help
Click to expand...
Click to collapse
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
Thank you bro I will test it tonight...
If you have time would you look at this please
http://forum.xda-developers.com/showthread.php?t=1781182
Thank you ..
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
Thanks very much for all of this it will help me a lot when I get round to flashing!
In reference to this, when I'm coming to update to the latest version of this rom, what's the procedure to follow?
Hi,
I'm trying to flash Jellybean 4.1.1 build #27 but it fails no matter what. I have followed the procedure, flashed the rom, erased cache, wiped data/factory reset, rebooted on recovery.
Here's what I get:
-- Install /sdcard/tg_endeavoru-ota-27.zip ...
Finding update package ...
Opening update package ...
Installing update ...
assert failed: getprop("ro.product.device") == "endeavoru" || getprop("ro.build.product") == "endeavoru"
E:Error in /sdcard/tg_endeavoru-ota-27.zip
(Status 7)
* Verifying filesystem...
* Verifying partition sizes...
Error Flashing zip '/sdcard/tg_endeavoru-ota-27.zip'
Failed
Any idea what I could be doing wrong?
Thank you very much in advance for your help.
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
I've got JB running on my phone but when I try to boot into recovery to install the apps it won't work. I get the red exclamation mark. I am coming from twrp2.2.0 I followed these instructions
Download the latest CM10 .zip file from here.
Download JB Google Apps from here.
Reboot into CWM or TWRP recovery.
Factory Data reset. (MUST DO THIS!)
Flash CM10 .zip file.
Reboot.
Reboot into recovery.
Flash JB Google apps.
Enjoy!
Any help would be great
jb 4.1.1 how screenshot??
hello All, this is my first quest in this forum. i'have flashed jb 4.1.1 in my device (one x) ad is all ok (wifi go in sleeping mode too fast but when it stand up go well) i need to make a lot of screenshot and i dont know how. Pls help
PS: i think this forum is very usefull for modding android, great work!!!)
Imerio
HavE fUn
MarcoHD said:
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
Click to expand...
Click to collapse
I love you and thank you. Simple, easy, quick instructions
Hi All,
Is there any guide on installing a brand new OS for Nexus S (GT-I9020T) ? Somehow my OS crushed and during boot up it stucks on the Google Screen.
Thnx !
Kees
1. enter recovery mode (clockwork mod)
2. wipe data/factory
3. wipe cache partition
4. advanced -> wipe dalvik cache
5. same menu -> wipe battery stats
6. install new rom and you are ready
manthos1978 said:
1. enter recovery mode (clockwork mod)
2. wipe data/factory
3. wipe cache partition
4. advanced -> wipe dalvik cache
5. same menu -> wipe battery stats
6. install new rom and you are ready
Click to expand...
Click to collapse
Thanks for the help. Can you please advice any up to date or ''safe'' ROM ?
And it is okay to install from SD Card directly ?
Cheers
Kees
karabaci said:
Thanks for the help. Can you please advice any up to date or ''safe'' ROM ?
And it is okay to install from SD Card directly ?
Cheers
Kees
Click to expand...
Click to collapse
It is advisable to install from SD card, so yes.
Stock OTA 4.1.2 Jelly Bean ROM is the safest. So i recommend this one: http://d-h.st/t7o
It is stock over-the-air ROM from google with a few added features you may need.
source: http://forum.xda-developers.com/showthread.php?t=1854366
If you want more features you can try stable releases of ROMs posted on the development section.
ej8989 said:
It is advisable to install from SD card, so yes.
Stock OTA 4.1.2 Jelly Bean ROM is the safest. So i recommend this one: http://d-h.st/t7o
It is stock over-the-air ROM from google with a few added features you may need.
source: http://forum.xda-developers.com/showthread.php?t=1854366
If you want more features you can try stable releases of ROMs posted on the development section.
Click to expand...
Click to collapse
Thanks for the advice !
I followed the steps above but when I try to install the pack getting an error of ''Status 7''
Any idea ? or recommendation ?
Ps: I attached the SS
Thnx
Kees
karabaci said:
Thanks for the advice !
I followed the steps above but when I try to install the pack getting an error of ''Status 7''
Any idea ? or recommendation ?
Ps: I attached the SS
Thnx
Kees
Click to expand...
Click to collapse
You need to update your custom recovery.
Download CWM 6.0.1.0 here: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.1.0-crespo.img
Put it anywhere in your pc, or even on your sdcard.
Then go to command prompt and type fastboot flash recovery <put EXACT img file location and name here>
Thank you all !
It is back now
Last question: Is my phone going to make system updates via internet automatically ?
Regards
Kees
karabaci said:
Thank you all !
It is back now
Last question: Is my phone going to make system updates via internet automatically ?
Regards
Kees
Click to expand...
Click to collapse
Because you have a custom recovery, no.
That's the advantage of using a custom recovery though, you can just download and flash any newly updated ROM/s instead of waiting for the official google update.
Hi all,
I want to install Andromadus ROM Build 13 on my DS and currently have stock 2.3.3 installed.
As this will be my first custom ROM and also I couldn't find any how-to to install Andromadus on an HTC Desire S so, I am posting it here.
I have 4EXT touch recovery, S-OFF'ed and the HBoot is downgraded to 0.98.2000 (PG8810000).
So, where do I start? I am making backups using 4EXT recovery and downloading "flinnycm101_saga_13.zip" & "gapps-jb-20121212-signed.zip" from http://andromadus.flinny.org/?q=node/24
but as posted on the same page..I have a doubt of whether to flash the MDDI kernel too? Is that required to be flashed on an HTC Desire S ?
Any full length how-to's will be appreciated.
General guide to flash any rom can be found here
No need to flash kernel. Just flash the rom and gapps.
You might also want to use Titanium Backup to backup any apps from your stock rom and restore to the new rom.
oddoneout said:
General guide to flash any rom can be found here
No need to flash kernel. Just flash the rom and gapps.
You might also want to use Titanium Backup to backup any apps from your stock rom and restore to the new rom.
Click to expand...
Click to collapse
So, Can I use 4ext's recovery app to boot into recovery mode >> then format System
>> Format Data
>>Format Cache
>> then Format Boot
>> Wipe Data/Factory reset (1st option in wipe/format menu)
>> Wipe Dalvik Cache
>> n then finally install zip (ROM) from sd card and flash the rom..
>> then flash then gapps zip?
Also, isn't 4ext's backup option backs up my apps, app's data and the contacts too? :| um..what about the draft message(s) ? will that be backed up too using 4ext recov.?
But I guess I won't be able to restore them on an individual basis when I am done flashing the new ROM? As 4ext's created backup can only restore the full backed-up data which includes the old ROM itself!
Update: backing up apps+data using Titanium backup pro..so that will backup my contacts+ sms+draft sms too..right?
Any advice?
Guys..I did the following:
went to 4ext's recovery app in recovery mode
>> then formated System
>> Formated Data
>> wiped* Cache (as there was no option for: "format" cache)
>> then Formated Boot
>> Wiped Data/Factory reset (1st option in wipe/format menu)
>> Wiped Dalvik Cache
>> n then finally installed zip (ROM) from sd card and flashed the rom..
>> then flashed then gapps zip
Now after 1st reboot from recovery..I am stuck at white background saying HTC..its been quite a few mins around 3-4mins
Shall I re-flash the ROM ?
Please help :s
sky770 said:
Guys..I did the following:
went to 4ext's recovery app in recovery mode
>> then formated System
>> Formated Data
>> wiped* Cache (as there was no option for: "format" cache)
>> then Formated Boot
>> Wiped Data/Factory reset (1st option in wipe/format menu)
>> Wiped Dalvik Cache
>> n then finally installed zip (ROM) from sd card and flashed the rom..
>> then flashed then gapps zip
Now after 1st reboot from recovery..I am stuck at white background saying HTC..its been quite a few mins around 3-4mins
Shall I re-flash the ROM ?
Please help :s
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1943524 read this!!!
acultr said:
http://forum.xda-developers.com/showthread.php?t=1943524 read this!!!
Click to expand...
Click to collapse
h ****..I just pulled it out :'(
well..it again got stuck into the same boot screen..
funny thing is I din't even pressed the power button it straightaway booted up? :s
ok...wrote the command "adb reboot recovery"
I am back into the 4ext recovery menu
now what's next?
sky770 said:
h ****..I just pulled it out :'(
well..it again got stuck into the same boot screen..
funny thing is I din't even pressed the power button it straightaway booted up? :s
ok...wrote the command "adb reboot recovery"
I am back into the 4ext recovery menu
now what's next?
Click to expand...
Click to collapse
read the previous post
acultr said:
read the previous post
Click to expand...
Click to collapse
Is there a way I can determine which screen do I have..now that I have already flashed my device and cannot access es explorer and stuff?
I do have access to 4ext recovery and adb console :|
Is it possible to navigate to / or /sys using adb console?
Also, suppose even if I do have the MDDI type of screen and I flash the MDDI kernel img but will that mean that I won't be able to adjust screen brightness and stuff?
Just flashed the MDDI kernel..waiting for reboot proc to complete...
I hope this doesn't fail this time.. :|
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
As a suggestion, flash the mddi panel if it boots then you can be fairly certain your on the right path. At the moment there is no brightness control for mddi panel but there are some alternatives in the thread i directed you to
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
jugg1es said:
As a suggestion, flash the mddi panel if it boots then you can be fairly certain your on the right path. At the moment there is no brightness control for mddi panel but there are some alternatives in the thread i directed you to
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
Click to expand...
Click to collapse
now its been ~2-3mins still stuck on the HTC screen :| (even after flashing the MDDI kernel)
Do I have to re-clear/wipe the cache..after flashing the ROM? or re-flash the ROM itself? (as I have read in some posts that it usually works after clearing the dalvik/cache and/or reflashing the same ROM again)
Can you provide me with the command I can use on adb console to find out the brand of my screen's manufacturer ?
Update:
I had flashed the ROM and then flashed the google apps pkg and then after a reboot now again flashed the MDDI kernel.
Is it the correct sequence to install the MDDI kernel?
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
I have shifted my issue to this thread: http://forum.xda-developers.com/showthread.php?p=37933379
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
sky770 said:
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
Click to expand...
Click to collapse
Best thing to do is not panic, you can still access recovery. What i would do in this situation is start again from the beginning with fresh downloads checking you have correct gapps package for the rom(check md5 of all files) using 4ext format all except sd card and reflash new downloads. Reboot into recovery using adb, try not to pull the battery unless you really have to then if you do wait a couple of seconds before replacing it
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
jugg1es said:
Best thing to do is not panic, you can still access recovery. What i would do in this situation is start again from the beginning with fresh downloads checking you have correct gapps package for the rom(check md5 of all files) using 4ext format all except sd card and reflash new downlosd
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
Click to expand...
Click to collapse
Thanks for replying..
um..can you please..follow with me in this thread here: http://forum.xda-developers.com/showthread.php?t=2146151
Thanks a lot :|
PS: Sorry..I am all on fire..as this is the only phone I have :| (except my sucko Nokia )
sky770 said:
Need help guys..its been more than 5 mins since I am stuck on the screen..what should I do now?
Pull out the battery..to give it a hard reset?
Please help :'(
Click to expand...
Click to collapse
go to recovery restore your prev. ROM and check the panel
Step 1. Find out which screen panel your device has:
1) Download and install Android Terminal Emulator from Google Play Market
2) Open the application and type in these commands:
(WARNING: to use these commands - you must be rooted with either Superuser or SuperSU AND have BusyBox installed on your phone)
su
dmesg|grep -i panel
If the app shows you any text with word "sony" in it - then your device has a screen panel made by Sony (obviously). If that's the case - you can just close this thread at once and don't worry that your device might freeze at "HTC Quietly Brilliant" screen after flashing a ROM. Otherwise, proceed forward.
OR
1) Open up a file manager that has an ability of browsing any partition above the default SD-card directory and can access the system partition
You can use either ES File Manager or Root Explorer
2) Navigate to /sys/android_display
If there is a file called "sony ****** wvga" - then you have a Sony panel. Otherwise - you device has a panel by Hitachi.
Step 2. Download a MDDI kernel developed by Andromadus:
For Android 4.0.x & 4.1.x, use this link --> http://goo.im/devs/Super/andromadus/...kernel_82n.zip
For Android 4.2.x, use this link --> http://andromadus.flinny.org/sites/a...212.zip&nid=16
Step 3. Flash the MDDI kernel:
If you are S-OFF --> just flash the .zip file with the kernel after flashing the ROM and GAPPS package through "install zip from sdcard"
If you are S-ON --> use the following instruction:
Thanks for Fatal1ty 18 RUS:good:
Re: [Q] How to start Flashing Andromadus ROM (Build 13) Android 4.2 on HTC Desire S?
sky770 said:
Thanks for replying..
um..can you please..follow with me in this thread here: http://forum.xda-developers.com/showthread.php?t=2146151
Thanks a lot :|
PS: Sorry..I am all on fire..as this is the only phone I have :| (except my sucko Nokia )
Click to expand...
Click to collapse
Stop opening fresh threads, people tend to ignore you More if you constantly open threads. I had a couple of panicky moments when i first did mine. Just take a deep breath and start again
”As you get older three things happen. The first is your memory goes, and I can’t remember the other two.” - Norman Wisdom
The MD5 was not same ! The MDDI kernel I flashed it did not had the same MD5 as I the one I redownloaded..
And now..I cannot reboot into recovery by using adb.. :'(
I tried "adb reboot recovery" command
And it gave me an error saying: error: device not found
How can I reset the adb?
PS: sorry MODs but I wanted to present my problem clearly so had to open a thread with a clear description.
sky770 said:
The MD5 was not same ! The MDDI kernel I flashed it did not had the same MD5 as I the one I redownloaded..
And now..I cannot reboot into recovery by using adb.. :'(
I tried "adb reboot recovery" command
And it gave me an error saying: error: device not found
How can I reset the adb?
PS: sorry MODs but I wanted to present my problem clearly so had to open a thread with a clear description.
Click to expand...
Click to collapse
command:adb devices
acultr said:
command:adb devices
Click to expand...
Click to collapse
prints:
List of Devices attached
it is showing nothing :'(
Please i need your help about :
my phone is samsung galaxy i9003
my software now is jelly bean 4.1.2
I need to update my phoen to jb 4.2.2
can any one help me ??
i posted this thread in Q and A and no one help me
Please i need help
all i need to update my phone from android 4.1.2 to 4.2.2
please help me
Thanks ,,,
Hey bro follow this to make clean install (but this will wipe your data)
DO IT AT YOUR OWN RISK
1- make sure you have kies installed or just install galaxy sl usb drivers (thanks to Zulfauzi).
2-Download odin3 v1.85 from the attachments.
3-Download full DDLF2 from here (thanks to (thanks to sgatechwork).
4. Run Odin3 v1.85.
5. Check Re-Partition, Auto Reboot and F. Reset Time.
6. Click PIT button and select this file: latona_20110114.pit
7. Set it to download mode : Press Volume down + OK first, then hold Power button.
8. Connect USB cable and the program will detect the phone's Com number.
9. Click Start button to download the PIT file to phone.
10. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir].
11. Click PDA button and select this file: CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
12. Click PHONE button and select this file: MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5.
13. Click BOOTLOADER button and select this file: APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
14. Click CSC button and select this file: GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5.
15: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!].
16. Click Start button to flash these files to phone.
17. Do not touch anything till you see PASS on the program window.
18. Factory reset.
19. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.
thanks to Misledz for the instructions (original thread here)(I only edited file names).
Now download any Jb 4.2.2 rom and carefully follow the OP instructions.
I suggest CM10.1 A8 by dhiru1602 (thanks to him), rom is verry stable and smooth.
if I helped you please hit the "thanks" button
Best regards
ASMI1 said:
Hey bro follow this to make clean install (but this will wipe your data)
DO IT AT YOUR OWN RISK
1- make sure you have kies installed or just install galaxy sl usb drivers (thanks to Zulfauzi).
2-Download odin3 v1.85 from the attachments.
3-Download full DDLF2 from here (thanks to (thanks to sgatechwork).
4. Run Odin3 v1.85.
5. Check Re-Partition, Auto Reboot and F. Reset Time.
6. Click PIT button and select this file: latona_20110114.pit
7. Set it to download mode : Press Volume down + OK first, then hold Power button.
8. Connect USB cable and the program will detect the phone's Com number.
9. Click Start button to download the PIT file to phone.
10. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir].
11. Click PDA button and select this file: CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
12. Click PHONE button and select this file: MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5.
13. Click BOOTLOADER button and select this file: APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
14. Click CSC button and select this file: GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5.
15: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!].
16. Click Start button to flash these files to phone.
17. Do not touch anything till you see PASS on the program window.
18. Factory reset.
19. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.
thanks to Misledz for the instructions (original thread here)(I only edited file names).
Now download any Jb 4.2.2 rom and carefully follow the OP instructions.
I suggest CM10.1 A8 by dhiru1602 (thanks to him), rom is verry stable and smooth.
if I helped you please hit the "thanks" button
Best regards
Click to expand...
Click to collapse
Thanks for your reply
but there's another method about updating by CWM RECOVERY
do you know how this method done ?
dr_amjad said:
Thanks for your reply
but there's another method about updating by CWM RECOVERY
do you know how this method done ?
Click to expand...
Click to collapse
yes there is another way if you have recovery installed. Just tell us what ROM you are on (your 4.1.2 ROM name) and try to find out if you have CWM recovery(volume up+home+power). Let us know this this then we will proceed.
@ASMI1 :He is on a 4.1.2 OS means he have a custom ROM and re-partioning is not mandatory because he is comming for a CM10 base.
mustafahussain said:
yes there is another way if you have recovery installed. Just tell us what ROM you are on (your 4.1.2 ROM name) and try to find out if you have CWM recovery(volume up+home+power). Let us know this this then we will proceed.
@ASMI1 :He is on a 4.1.2 OS means he have a custom ROM and re-partioning is not mandatory because he is comming for a CM10 base.
Click to expand...
Click to collapse
Thank you very much mr mustafa
i download the ROM from video on youtube and this is link of video
http://www.youtube.com/watch?v=VqypSD3JBJk
It's CM 10 Alpha 3
And in the video there's a download link of the Rom and this is the link which in the video
http://forum.xda-developers.com/showthread.php?t=1868074
by the way : when i click power key there is an option called : Reboot
when i click on Reboot tell me that i can Reboot my phone and recovery and download mode
Thanks for your reply
If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.
Drizzt_Kueh said:
If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.
Click to expand...
Click to collapse
Thank you very much for your reply
i will try and tell you
but i will not do any thing about : Data wipe/Factory reset & 5. Format dbdata. , right ??
Drizzt_Kueh said:
If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.
Click to expand...
Click to collapse
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??
dr_amjad said:
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??
Click to expand...
Click to collapse
Redownload rom.
Sent from my GT-I9003 using xda premium
dr_amjad said:
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??
Click to expand...
Click to collapse
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
dr_amjad said:
Thank you very much mr mustafa
i download the ROM from video on youtube and this is link of video
http://www.youtube.com/watch?v=VqypSD3JBJk
It's CM 10 Alpha 3
And in the video there's a download link of the Rom and this is the link which in the video
http://forum.xda-developers.com/showthread.php?t=1868074
by the way : when i click power key there is an option called : Reboot
when i click on Reboot tell me that i can Reboot my phone and recovery and download mode
Thanks for your reply
Click to expand...
Click to collapse
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
How to install
Warning only for lasted base CM10 Alpha4
if older base CM10 Alpha3 Full KPE please !!!
- Wip Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Flash first clean for mandatory starting
On CM10 Alpha 3 and all other basic Froyo, Gingerbread, ICS, JB
Click to expand...
Click to collapse
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english
ASMI1 said:
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english
Click to expand...
Click to collapse
Thank you very much mr ASMI 1 for your reply
but sorry i am still Noob in android development and updating
but according to your reply i must do :
- Wip Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Right ??
and please is there a video about my case (( updating samsung gt i 9003 from cm 10 alpha 3 to cm 10.1 alpha 8 )) ??
and sorry for annoyance you
ASMI1 said:
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english
Click to expand...
Click to collapse
(( if older base CM10 Alpha3 Full KPE please !!! ))
what the meaning of KPE ??
and i must do this ?? (( if older base CM10 Alpha3 Full KPE please !!! ))
dr_amjad said:
(( if older base CM10 Alpha3 Full KPE please !!! ))
what the meaning of KPE ??
and i must do this ?? (( if older base CM10 Alpha3 Full KPE please !!! ))
Click to expand...
Click to collapse
it means that if you have a base older to CM10 Alpha 3 then you should proceed with full KPE,,,
so IF YOUR CURRENT ROM IS ON CM10 Alpha 3 I would suggest just flash CM10 Alpha4 base ROM by Dhiru then,
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
mustafahussain said:
it means that if you have a base older to CM10 Alpha 3 then you should proceed with full KPE,,,
so IF YOUR CURRENT ROM IS ON CM10 Alpha 3 I would suggest just flash CM10 Alpha4 base ROM by Dhiru then,
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Click to expand...
Click to collapse
Now i have Cm 10 alpha 3
you want me to do these steps :
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
and update my phone to Cm 10alpha 4 or cm 10.1 alpha 8 ?????????
dr_amjad said:
Now i have Cm 10 alpha 3
you want me to do these steps :
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
and update my phone to Cm 10alpha 4 or cm 10.1 alpha 8 ?????????
Click to expand...
Click to collapse
No, to upgrade from previous version of CM10 follow this:
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
Click to expand...
Click to collapse
and then
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
here where to download CM10 A4 and google apps(20121011 for CyanogenMod 10.0.x) (thanks to master dhiru1602).
BTW, in the past we used to install XXKPE stock rom (pit, bootloader, PDA, Phone, and CSC)(this is what meant by full KPE) and then install DDLF2 as PDA in download mod. But now full DDLF2 is out so we don't need XXKPE anymore to make clean install, you just install full DDLF2 (pit, bootloader, PDA, Phone, and CSC) the same way you install XXKPE and then proceed with installing your custom rom.
it is recommended to make clean install always before installing any custom rom (CM or rom based on CM) to prevent any issue (installing custom rom over another custom rom may cause some problems like lags and no signal issue...etc) just make clean install.
I advise you to upgrade only if, for example; you want to update to REMICS rom and you have previous version of REMICS rom or you want to update to carbon rom and you have previous version of carbon rom or you want to update to CM10.1 A8 rom and you have previous version of CM10.1 A7 rom...Do you get my point?
There is no Custom Rom for the Galaxy ACE 3 Duos GT-S7272. So, kindly develop or provide Custom Rom for GT-S7272. Thanks
We have a cyanogenmod11 for this device
nicebunny said:
There is no Custom Rom for the Galaxy ACE 3 Duos GT-S7272. So, kindly develop or provide Custom Rom for GT-S7272. Thanks
Click to expand...
Click to collapse
Here is the link for cm11 https://yadi.sk/d/LFvTYxc0esWHJ
And here is the link for cwm 6.0.5.1 gt-s7272 https://yadi.sk/d/iWzthzvzerDqw
For Gapps http://d-h.st/users/TKruzze
just do this start with cwm 6.0.3.1 and follow these steps :
1- wipe data / factory reset
2- install zip from sd card
3- choose zip from sdcard
4- CWM Recovery 7272 6.0.5.1 Final.zip
5- advanced --> reboot recovery
6- mount and storage -- >format /cache --> format /data --> format /boot --> format /data and /data/media (/sdcard) --> Go back
7- install zip --> choose zip from /storage/sdcard1 --> choose CM11.zip
8- reboot system now
9- go again to recovery and flash gapps
THANKS TO ZIM555
Thanks very much Dear.
Please elaborate the process as I am new to install Custom ROM for the GT-S7272. Also describe that the Custom ROM is Kit Kat or LolliPop.
Now Downloading the software from the given links. Therefore, please guide me to install custom rom on GT-S7272.
Thanks once again.
BlackAndroid007 said:
Here is the link for cm11 https://yadi.sk/d/LFvTYxc0esWHJ
And here is the link for cwm 6.0.5.1 gt-s7272 https://yadi.sk/d/iWzthzvzerDqw
For Gapps http://d-h.st/users/TKruzze
just do this start with cwm 6.0.3.1 and follow these steps :
1- wipe data / factory reset
2- install zip from sd card
3- choose zip from sdcard
4- CWM Recovery 7272 6.0.5.1 Final.zip
5- advanced --> reboot recovery
6- mount and storage -- >format /cache --> format /data --> format /boot --> format /data and /data/media (/sdcard) --> Go back
7- install zip --> choose zip from /storage/sdcard1 --> choose CM11.zip
8- reboot system now
9- go again to recovery and flash gapps
THANKS TO ZIM555
Click to expand...
Click to collapse
Does this works?
lancejuson said:
Does this works?
Click to expand...
Click to collapse
100% work for gt-s7272 trust me i've try it and it is working fine
it's Not Working [Be Careful]
(
BlackAndroid007 said:
100% work for gt-s7272 trust me i've try it and it is working fine
Click to expand...
Click to collapse
when start installing update in cwm recovery not complete just stay say installing updates
ahmadalmoslli said:
when start installing update in cwm recovery not complete just stay say installing updates
Click to expand...
Click to collapse
Are you sure because i've try ans it works for me did you follow me step by step ?
Thanks you
i have followed the Rom developer on his Russian forum and get the latest version of Rom
it's working great
thanks you again for your share
@BlackAndroid007: hi. Im new about flashing roms. Can you please help me? I have ace 3 duos (7272)
Is cm11 100% stable on s7272? What are those bug on it? Thanks
Status 7 error and "assert"
Can you Help me ?
Device - Samsung galaxy ace 3 gt-s7272
Rom- CM11 - from a link in this forum which is told to support the given Device
Recovery- CWM 6.0.3.1
Problem- Shows status 7 error while flashing and bricks the Device. (since installation is interrupted)
Note - There is no code beginning with "assert" in updater-script file.
Question - How can I install CM11 or is there a good alternative supported Rom - which allow system wide themes. ?
MSV O said:
Can you Help me ?
Device - Samsung galaxy ace 3 gt-s7272
Rom- CM11 - from a link in this forum which is told to support the given Device
Recovery- CWM 6.0.3.1
Problem- Shows status 7 error while flashing and bricks the Device. (since installation is interrupted)
Note - There is no code beginning with "assert" in updater-script file.
Question - How can I install CM11 or is there a good alternative supported Rom - which allow system wide themes. ?
Click to expand...
Click to collapse
U need 6.0.5.1 cwm. Flash it then go to advance and then reboot to recovery mode. Then format data then go to advance mount and storage and click format data/ data/ media blah blah. Den flash the cm11 and the gapps. And oh by the way the flashing of cm11 is kinda long to install b patient. Once u done install the gapps and ur done
jusipism said:
U need 6.0.5.1 cwm. Flash it then go to advance and then reboot to recovery mode. Then format data then go to advance mount and storage and click format data/ data/ media blah blah. Den flash the cm11 and the gapps. And oh by the way the flashing of cm11 is kinda long to install b patient. Once u done install the gapps and ur done
Click to expand...
Click to collapse
Done.
Send via CyanogenMod 11
Next prob -
ROM - cm11
Model - Samsung galaxy ace gt-s7272
Problem - Bluetooth is not turning on after flashing cm
Note - a repair app said Bluetooth settings folder not found
Question - how to regain Bluetooth.
Problem Priority - not too important if you are busy
Sent from my GT-S7270 using XDA Free mobile app
jusipism said:
@BlackAndroid007: hi. Im new about flashing roms. Can you please help me? I have ace 3 duos (7272)
Click to expand...
Click to collapse
yes if u have some problems follow my video https://www.youtube.com/watch?v=0EPRwEbFh7w
cm11 is not 100% stable for gt-s7272
rom
hello.
I have a question.
there is for this device(Ace 3 .GT-S7272) also custom rom in this link:
http://forum.xda-developers.com/android/development/rom-port-cyanogenmod-11-samsung-galaxy-t2938825
Are these two different ROM's?
because this rom (http://forum.xda-developers.com/android/development/rom-port-cyanogenmod-11-samsung-galaxy-t2938825
)
not working.
is your rom Healthy? is your rom working?
i am waiting for your answer.
thanks.
Its all working. Maybe you dont have the cwm that fits to it.
Sent from my GT-S7272 using XDA Free mobile app
jusipism said:
@BlackAndroid007: hi. Im new about flashing roms. Can you please help me? I have ace 3 duos (7272)
Click to expand...
Click to collapse
Of course send me a message and i will let u a link for the video i've made
100% work for gt-s7272
BlackAndroid007 said:
100% work for gt-s7272 trust me i've try it and it is working fine
Click to expand...
Click to collapse
100% work for gt-s7272
but i have a prooblem how can i install gaap GApps Packages ??
tainy007 said:
100% work for gt-s7272
but i have a prooblem how can i install gaap GApps Packages ??
Click to expand...
Click to collapse
Intall it using recovery download your gapps after that go to your recovery and flash it with doin this : install zip --> chose zip --> and chose your gapps zip file that's all