Database Info

Get your own CWM recovery for newer devices and dont beg anywhere - 2 simple steps

Those who struggle to get CWM recovery for thier newer devices and who are facing problem on romdump your stock rom to get stock recovery.img here you have 2 simple steps to get your CWM recovery for your new device
Step -1
Creating A Dump\Backup
Note: Root Required
1. Set "Settings" -> "Display" -> "Sleep" -> "10 minutes"
2. Install or update "Busybox" from play store
3. Set your phone to "Airplane" mode
4. Make sure that the card is not less than 2Gb of free space
5. Use any one of the following:
BakupTool_sdcard.zip saves a backup copy on the path: /mnt/sdcard/backup_v2
BakupTool_sdcard2.zip saves a backup copy on the path: /mnt/sdcard2/backup_v2
6. Extract the BakupTool_* to sdcard. Full path to the file should be: / sdcard / gscript
7. Install program: /sdcard /gscript /"GScriptLite.apk"
8. Open the program "GScriptLite". Press "Menu button" -> "Add Script"
9. Set tick "Needs SU"
10. Click "Load file" and select "back_mt657x.sh"
11. Click the button "Save"
12. Tap on a new script, "back_mt657x.sh". After that give the program root permissions if asked and wait for 5- 10 minutes. Do not use the phone during the process.
A sign of a normal shutdown of the script is:
Message in the terminal:
100% Backup Complite!!!
Saved to / sdcard/backup_v2/GGGGMMDD-ChChmm
Star Time: hh: mm: ss; End Time: hh: mm: ss
The appearance at the root of SD-card phone the following structure of folders and files:
backup_v2
YYYYMMDD-hhmm
* BDRS-YYYYMMDD-hhmm
boot.img
cache.ext4.tar
data.ext4.tar
nandroid.md5
recovery.img
system.ext4.tar
* misk
cache.img
cmdline.info
config.info
cpu.info
nvram.img
nvram.tar
ram.info
rom.info
* over
expdb.raw
full_preloader_part.raw
misc.raw
pmt.raw
sec_ro.raw
seccfg.raw
unknown.raw
boot.img
dsp_bl.img
ebr1.img
firmware.info
MT6577_a4_v2c.info
logo.img
mbr.img
preloader.img
recovery.img
system.img
uboot.img
data.img
step - 2
upload your stock recovery.img to get cwm recovery
kaushik Dutta has developed a clockworkmod recovery builder on the official site....
http://builder.clockworkmod.com/
so upload your stock recovery.img and get exact cwm recovery.img of ur device....and flash it.
if yours is a new devicw please select new device column.
thanks for this awesome build.
- after u upload your stock recovery.img on clicking fro new device just click on Build icon on the last of the page.....
- then u will be qued and u will gwt build number please save it for further refference...
- click proceed to that server and find ur build number,,,if it finished successfully u will see green icon on the left
- then click on your build number then click status there u will get something like this
Project recovery
Last Successful Artifacts
android_device_lge_cayman.zip 5.12 MB
inputrecovery.img 16.00 MB
manifest.xml 53.95 KB
recovery.img 6.92 MB
finally download recovery.img which is ur cwm recovery and flash it via Mobileuncle MTK tools which can be downloaded from playstore
If something goes wrong u can revert back ur rom or stock recovery itself by flashing ur stock recovery.img from the back up folder...or u can flash ur rom back using SP FLASH tools
IF i helped u please press thanks :victory::victory::victory:

anybody tried???
meanwhile how to extract stock recovery.img from stock ICS

I did test it. The image build does boot for me. But the build recovery i got this way did miss some *.ko files my device needed
The site is not new by the way..
Read here how to dump you're recovery...
http://forum.xda-developers.com/showthread.php?t=1935162

Re: clockworkmod for newer devices - now get CWM recovery for every android
[email protected] said:
I did test it. The image build does boot for me. But the build recovery i got this way did miss some *.ko files my device needed
The site is not new by the way..
Read here how to dump you're recovery...
http://forum.xda-developers.com/showthread.php?t=1935162
Click to expand...
Click to collapse
Dumping rom is bit confusing....because I'm a dentist...
Can u please explain in simple steps to get stock recovery.img
I'm having intex aqua flash which is new in the market but it has all the feature of high devices...
One more thing can I do this in windows? Or should I need linux?
Sent from my Aqua flash using xda premium

Trying this right now. Hope the recovery.img from a stock nandroid works.

Re: clockworkmod for newer devices - now get CWM recovery for every android
McJesus15 said:
Trying this right now. Hope the recovery.img from a stock nandroid works.
Click to expand...
Click to collapse
Share in simple steps to extract stock recovery.img after u successfully get ur cwm
Sent from my Aqua flash using xda premium

Re: clockworkmod for newer devices - now get CWM recovery for every android
drganbds said:
Share in simple steps to extract stock recovery.img after u successfully get ur cwm
Sent from my Aqua flash using xda premium
Click to expand...
Click to collapse
My device is different. Technically I have cwm recovery already. It's just only accessible through a fast boot command. This allows me to have a nandroid back up already so I just took the recovery.img from a stock back up
Sent from my Zio using xda app-developers app

check this thread is updated...

I tried this for a Lenovo IdeaTab A2109 to try and build a touch recovery. It already has a unofficial cwm recovery non touch, so I used that as the recovery.img. It put out 2 recovery.img's. One was a recovery.img and the other inputreovery.img. I'm not sure what one I should flash or if I'm supposed to flash both. Would it put out errors if it didn't work?
Thanks for this post and any help you can give.

linsalata28 said:
I tried this for a Lenovo IdeaTab A2109 to try and build a touch recovery. It already has a unofficial cwm recovery non touch, so I used that as the recovery.img. It put out 2 recovery.img's. One was a recovery.img and the other inputreovery.img. I'm not sure what one I should flash or if I'm supposed to flash both. Would it put out errors if it didn't work?
Thanks for this post and any help you can give.
Click to expand...
Click to collapse
Inputrecovery.img is wat u uploaded and recovery.img is wat u get as cwm recovery.
Sent from my Aqua flash using xda premium

drganbds said:
Inputrecovery.img is wat u uploaded and recovery.img is wat u get as cwm recovery.
Sent from my Aqua flash using xda premium
Click to expand...
Click to collapse
Oh OK. What about the question I asked about errors? Will it give any errors if the recovery wont work?
Thanks for the quick reply.

linsalata28 said:
Oh OK. What about the question I asked about errors? Will it give any errors if the recovery wont work?
Thanks for the quick reply.
Click to expand...
Click to collapse
If it gives error like black screen or volume key unfunction means it is not compiled properly but don't worry your device won't brick and u can revert back ur recovery by placing original.img on the root of phone storage and flash through mobileuncle tool..all the best
Sent from my Aqua flash using xda premium

Three Questions and I'm gonna try this out:
1. If the CWM recovery I build from CWM builder doesn't work, can I flash back the stock recovery by Mobile Uncle Tools, I mean won't it brick the device, can I still boot? I have a MT6577 device.
2. Does the script provided here backups up the stock recovery on Ice Cream Sandwich?
3. What else does this script do? Backup the whole phone?

ApplePriest said:
Three Questions and I'm gonna try this out:
1. If the CWM recovery I build from CWM builder doesn't work, can I flash back the stock recovery by Mobile Uncle Tools, I mean won't it brick the device, can I still boot? I have a MT6577 device.
2. Does the script provided here backups up the stock recovery on Ice Cream Sandwich?
3. What else does this script do? Backup the whole phone?
Click to expand...
Click to collapse
1. Yes u can reflash you stock recovery back via mobile uncle tool
2. Yes it will work on ICS
3. I have shown that wat the backup folder will have...it does full backup of your phone....
Sent from my Aqua flash using xda premium

Okay, Thank you.
I will try and update you on this.
Edit: After flashing recovery, I got blank screen in recovery mode.

thanx mate , really a helpfu guide i have Xtouch x714 with Allwinner A13 chip
before i tried many A13 CWM none of them worked not even boot , they nearly damage my tablet
thank god there is Phoneixcard i was able to revive it .
Anyway , your methode of getting the recovery.img from [gscript] did not work for me , it kept give me errors
even though it shows 100% complete
so i used another method to get my recovery.img , hence my tablet is an Allwinner A13 chip, so
i used [ Rom Dump ] which a small and powerful tool run it in Windows from [ http://www.techknow.me ]
it uses ADB so u have to be rooted and enable developer mode in your device and have ADB drivers in your PC
it backup image of your system and boot.img , recovery.img and data
so i used the extracted recovery.img in the site you provide me and i got my new recovery.img and flash it to my tablet via NovoTools 1.0
and i test it , it works like charm , thanx again mate really helpful

step 2 no working....website down?

Black Screen
When I flashed recovery made through it, it gave me a black screen Is there any way to fix this??

the online one is not working
i tried twice for micromax a84... i got the CWM recovery and flashed it via mobile uncle tools...but it didnt work

?
after hitting "build" it states
your build has been queued.The
build id is
9b42b141e21a35c4007c250f45ab2039
continue to the build sever
view the current build output
when i hit either option i get "HTTP ERROR 404.
can anyone else see my build id and if so can you download it and link it to me via PM.
or what can i do to get my image

Xolo Q3000 - recovery collection

XOLO Q3000 RECOVERY COLLECTION​
Hiii All XOLO Q3000 users,
I bring to you collection of recoveries for our beloved XOLO Q3000.
STOCK RECOVERY​
Jelly Bean
JB 4.2.1 S003
JB 4.2.1 S011
KitKat
Kitkat 4.4.2 S007 version
======================================================================================================
CUSTOM RECOVERY FOR ANDROID JELLY BEAN​
Carliv Touch Recovery BASED​
Carliv Touch Recovery v2.1
Carliv Touch Recovery v2.2
Carliv Touch Recovery v2.4
Carliv Touch Recovery v2.5
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​ClockworkMod- CWM- BASED​
CWM 5.5.0.4
CWM 6.0.2.8
CWM 6.0.3.2
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​TeamWin Projects - TWRP BASED​
TWRP 2.7.1.0
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​PhilZ Touch - TWRP BASED​
PhilZ Touch 6.4.7.7
====================================================================================================​
CUSTOM RECOVERY FOR ANDROID KITKAT​
ClockworkMod- CWM- BASED​CWM based 6.0.2.8
ClockworkMod 6.0.3.3 Recovery (CWM) Non-touch
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
Carliv Non-Touch Recovery BASED​
Modified Carliv CWM (non-touch) CWM 6.0.4.4
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
Carliv Touch Recovery BASED​
Carliv Touch recovery 3.0
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
PhilZ Touch BASED​[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0 aroma fixed
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1 aroma fixed
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
TeamWin Projects - TWRP BASED​
TWRP 2.7.0.0
TWRP 2.8.0.0
TWRP 2.8.1.0
TWRP 2.8.2.0
TWRP 2.8.4.0
TWRP 2.8.4.0 rev 2
TWRP 2.8.5.0
====================================================================================================​
So dont get confused which one to use from all above.
THE BEST CUSTOM RECOVERY​
For JELLY BEAN ​Carliv Touch Recovery v2.5
For KitKat- use anyone​
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1
TWRP 2.8.5.0
Test and report.
If you have any other working recovery please PM me.
HOW TO USE/FLASH CUSTOM RECOVERY.​
CREDITS​Credit goes to all involved in making them. (CWM team, TWRP team, PhilZ team, Carliv,yuweng)
hadiyalkishan- for JB & KK stock & testing
m0han - for ctr 2.5, for JB testing
rufus.reynolds - for KK testing
Jagadish-ravi - for JB & KK testing
vijay jay - for TWRP 2.7 testing
@Santhosh M - for TWRP 2.8.1.0
Thank You... Share Your Views...​

Many users dont know how to flash a custom recovery.
so i am making this thread which will guide u to flash a custom recoveries present in above thread.
​
If ur phone is rooted (supersu/superuser app is present in app drawer).
Method 1
Download and install flashify app from playstore
download custom recovery from above post.
Open flashify.
Backup current recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
goto flash
recovery image
Choose downloaded recovery.img (it may have different name)
Now u can reboot.
To boot into recovery
press vol up button, keep it pressed.
press power on button till u see boot logo.
release power button.
after going into recovery release vol up button.
Method 2
Mobile uncle tool
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
If ur phone is not rooted
What's needed:
USB data cable
MediaTek USB VCOM drivers thanks to @smokerman sir
SP Flash Tool
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
Install spflash tools
download recovery.
rename it to recovery.img
download scatter file.
Put scatter file and recovery image in same folder.
open SP Flash Tool, then click Scatter-loading button to load the scatter file
(MT6589_Android_scatter_emmc.txt) and ignore any message that may appear.
The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.
Press download button.
attach ur switched off phone with usb cable.
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
PLEASE PRESS THANKS BUTTON IF THIS HELPS​

This just keeps getting better and better.....thanks millions....Avi....well collated recovery thread.....its has everything we need....

Thanks for this post, man. I'll try the Stock Recovery for the OTA I've been getting since months. Because I've read somewhere that OTA only works on Stock recoveries.
Edit: The Stock recoveries here are S003 and S011. Mine is S009. Which one should I try?
Sent from my Q3000 using XDA Premium 4 mobile app

Vineet3 said:
Thanks for this post, man. I'll try the Stock Recovery for the OTA I've been getting since months. Because I've read somewhere that OTA only works on Stock recoveries.
Edit: The Stock recoveries here are S003 and S011. Mine is S009. Which one should I try?
Sent from my Q3000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Save ur recovery and try S011.:good:

CTR 2.5 can be used to flash both JB & KK ROMs.
but backup & restore is not possible.
Thanks to @Jagadish-ravi

stuck at download mode
i have kitkat 4.4.2, Kernel 3.4.67, software version s003_15072014, non-rooted
i have installed mtk vcom, sp flash and tried to port cwm, but sp flash tool used to stuck at download mode....any help?
i have attached the screeshot for the reference....
Thanks in advance...

Sagar_Patel said:
i have kitkat 4.4.2, Kernel 3.4.67, software version s003_15072014, non-rooted
i have installed mtk vcom, sp flash and tried to port cwm, but sp flash tool used to stuck at download mode....any help?
i have attached the screeshot for the reference....
Thanks in advance...
Click to expand...
Click to collapse
First thing is
Please dont quote whole post.
it is posted by me only and just few post above on same page.
Ur screenshot is very poor cant see anything please re upload with good resolution.
after pressing that download button u need to connect ur phone in switched off condition.
r u doing this as instructed.??
Please explain the process ur following?
Ur porting cwm means??
Or u mean to say flashing/installing??
which cwm ur using please specify.?

ow! sorry for the way i had posted the thing but thanks for the way you replied- it was quite Quick!!
so, herewith i have attached the zip file (for the better resolution) and jpg file as well (size i could manage within the limitation of this forum) of screenshot where i stuck...View attachment 083.zip
yes, i connected my phone in switched off condition after pressing download button...
i had followed exactly the same way as you have explained for the non-rooted device....
and it was newbie thing that i had written "porting cwm" instead of "installing/flashing cwm"...yes, i was trying to flash/install cwm...
recovery i tried to install is:- [CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
Thanks for helping me...

sorry i had just forgotten to mention the scatter file i had used....obviously yes, it is the same as you have uploaded as:-
avi3230 said:
Install spflash tools
download recovery.
rename it to recovery.img
download scatter file.
Put scatter file and recovery image in same folder.
open SP Flash Tool, then click Scatter-loading button to load the scatter file
(MT6589_Android_scatter_emmc.txt) and ignore any message that may appear.
Click to expand...
Click to collapse
however, i had to rename it as MT6589_Android_scatter_emmc.txt as the scatter file i had downloaded had have the name as attachment.php
also note that i had put zip file of recovery [CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0 and that scatter file in same folder as well....
kindly check if i had done any mistake there...
i have attached the scatter file to which i had renamed...

sp flash tool stuck at download mode?
ok may be i have found the mistake while posting just above the procedure i had done!!!
sp flash tool stuck at the download mode may be because i had done mistake (if it is?! ok, i cant confirm it until i can get xolo q3000 back to me or until someone here can confirm that yes, this was the mistake) as below:_
i had downloaded zip file of recovery
then i had downloaded scatter file of xolo q3000 as mentioned in my previous post
i had renamed the scatter file i had downloaded as MT6589_Android_scatter_emmc.txt as the scatter file i had downloaded had have the name as attachment.php (may be silly newbie thing here!!!)
i had put both those files in same folder
and did rest of the procedure as mentioned by avi3230 (OP) here in same thread for non-rooted xolo q3000 just a few posts above...
...and what should i have done?
i should have downloaded only the zip file of desired recovery and then if i extracted it, i could find that there are all the necessary files including recovery.img and scatter_file within the extracted folder!!!
i would like to attach screenshot of wrong thing i had done:- image named as "wrong"
and what i should have done is may be here:- image named as "may be"
i think i was trying to install zip file instead of recovery.img that should be there in extracted folder of recovery.zip along with the scatter_file as well...so, here now i have got where and why i had confused
Put scatter file and recovery image in same folder.
Click to expand...
Click to collapse
ok, if zip file of recovery has properly zipped, has properly downloaded and if it has properly extracted then you should find both the recovery.img and scatter_file within extracted folder....if not so, then you should put (get together) the scatter file and recovery image in "same folder" means in extracted folder....
confused? then i can only say sorry for my english but why i had posted the whole thing here? may be because someone can find that what kind of silly things those can be done by newbies....and if so, they can help....

Sagar_Patel said:
ok may be i have found the mistake while posting just above the procedure i had done!!!
.
Click to expand...
Click to collapse
OK dont worry about ur English or anything wrong u doing.
just follow these steps
this is considering ur running kitkat on ur phone (S003 or S007 build no)
download
1. SP_Flash_Tool
2. philz recovery - this or this
3. drivers - from here
extract drivers folder- mtkusball 0.9.2
open smartphone driver folder - x86/x64 according to ur windows os and install drivers.
or just select from autoinstall folder
connect ur phone in switch off condition to pc.
when asked fro drivers use MT65xx preloader drivers.
when u connect switched on phone and if asked for drivers use - android winusb drivers.
(please check in device manager after connecting ur phone in each case whether drivers are installed or any red triangle is ther)
restart ur computer.
extract sp tools in folder
extract philz recovery in a folder (it is in 7z or rar format just extratc in folder in winrar)
in philz folder u have scatter file, recovery.img boot.img and lk,bin files
start sp flash tools
select scatter loading
select scatter file from philz folder
deselect uboot and bootimg
press download button
connect ur switched off phone to usb cable.
flashing will be done
confirmed by green circle.
boot in recovery by pressing power + vol up button.
Reply if any issues.

avi3230 said:
OK dont worry about ur English or anything.....
....Reply if any issues.
Click to expand...
Click to collapse
just to add.... tip1: use usbdeview (g00gle) to remove all usb devices before adding your mobile device.
tip2 (based on my experience): try a previous (older) clean version of w!nd0ws also before giving up.

avi3230 said:
TeamWin Projects - TWRP BASED
TWRP 2.7.1.0
PhilZ Touch - TWRP BASED
PhilZ Touch 6.4.7.7
THE BEST CUSTOM RECOVERY
For JB
Carliv Touch Recovery v2.5
For KK
[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
Click to expand...
Click to collapse
please do a twrp that'd work flawlessly on both jb & kk. thanks.
i suppose you're aware of this.

m0han said:
please do a twrp that'd work flawlessly on both jb & kk. thanks.
i suppose you're aware of this.
Click to expand...
Click to collapse
Yeah already seen that no support for philz now.
TWRP is bigger in size and u need to change partition size of recovery.
which is another headache for TWRP.
I already have it but again u need to flash whole stock rom again as whole
preloader boot recovery will change.

avi3230 said:
....TWRP is bigger in size and u need to change partition size of recovery.....
....I already have it but again u need to flash whole stock rom again as whole preloader boot recovery will change.
Click to expand...
Click to collapse
is it fully working on both bases - jb and kk? does it allow jb/kk rom switching? what are the drawbacks of flashing whole stock rom again?
what if we make full backup of data (call log/sms/mms/dictionary etc.) and also apps+apps-data using my backup app......
....... - can those be restored in the new setup and be up & running? if so, i don't foresee much troubles. do you?
you being much more experienced, please elaborate. thanks.

m0han said:
is it fully working on both bases - jb and kk? does it allow jb/kk rom switching? what are the drawbacks of flashing whole stock rom again?
what if we make full backup of data (call log/sms/mms/dictionary etc.) and also apps+apps-data using my backup app......
....... - can those be restored in the new setup and be up & running? if so, i don't foresee much troubles. do you?
you being much more experienced, please elaborate. thanks.
Click to expand...
Click to collapse
As TWRP is larger in size most of the time it wont boot in recovery.
also backing up of recovery wont work on 7mb recovery partition in any cwm based recovery.
So i feel we should stick to philz.

avi3230 said:
.....i feel we should stick to philz.
Click to expand...
Click to collapse
just in case you haven't seen this yet. this too.
wish you (or someone else) can do some magic!

m0han said:
just in case you haven't seen this yet. this too.
wish you (or someone else) can do some magic!
Click to expand...
Click to collapse
I already have twrp made for device which is easy.
its size is more than 6mb which is the issue.
u can change size of recovery to almost 11mb but then it wont boot in recovery specifically on 6589 chipsets. then whats t use.
to make it boot in recovery we need to change values in preloader.bin which is difficult task.
if anyone working on ubuntu please make an kernel with drivers files from this source.
if using this kernel twrp is less than 6mb then everything will be fine.

[CTRv2]Panasonic P81[CTRv2][TOUCH BASED]

[CTR Recovery][Port][Touch Based][16 September 2014]​
Carliv Touch Recovery with Aroma File Manager Support
You must have Root access.
Installation Instructions
1. Download and place the image file on SD card.
2. Install MTK MobileUncle Tool from Play Store and open and go to Recovery Updates option
3. Select the image file to install and let it be installed automatically.
4. It will reboot into recovery.
Recovery image file Download Link
Click HERE
ClockworkMod Recovery (CWM) is a replacement recovery option for Android devices,and CTR is based on CWM and also support Touch functionality!!!!!
Please don't mirror the Recovery if anyone want to modify do take my permission.
Credits :-
===>Carliv
===>michfood
===>Me

More Recoveries Coming soon for Panasonic P81.
Keep Visting this Page.
Thanks & Regards
Shivam Bhalla
XDA.

Any custom rom or recoveries for P61

Shivam Bhalla said:
More Recoveries Coming soon for Panasonic P81.
Keep Visting this Page.
Thanks & Regards
Shivam Bhalla
XDA.
Click to expand...
Click to collapse
Hello
Any rom for p81?
Thanks

Sir how to getback my stock recovery becoz i cant restore my backup in cwm recovery
Sent from my Coolpad 7320 using XDA Free mobile app

Can i flash this CTR recovery on my CWMauto recovery directly (Panasonic p81)?

[SOLVED]ROOT+RECOVERY WITHOUT PC] TWRP 3.0 Recovery For Micromax Canvas Mega 4G Q417

TWRP Recovery 3.0.2.3 For Micromax Canvas Mega 4G(Q417)
DOWNLOAD & INSTRUCTIONS:
How To Flash
1) First You Need To Your Mmc Mega Using Kingroot DOWNLOD & Install It From Here:https://play.google.com/store/apps/details?id=net.citra.kingroots&hl=en
2) DOWNLOAD & Install Flashify From Play Storehttps://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en
3) DOWNLOAD TWRP RECOVERY GIVEN LINK BELOW Extract The rar & Move To SD Card
4) Open Flashify App & Navigate Extracted Recovery Image File Click Yup Flash Click Reboot:good:
CONGRATULATIONS!!!
I'm not responsible for any damage to your device. Do this at your own risk.
Thanks To BouyaPK
DOWNLOED IT HERE: https://www.datafilehost.com/d/7907d78e

How to root it

Aryan25167 said:
How to root it
Click to expand...
Click to collapse
Download kinguser app for root
Sent from my Micromax Q417 using XDA-Developers mobile app

Micromax canvas mega2 q426
hello sir i need custom rom and recovery for my device micromax Q426 what to do is there any that i can use thank you

Sir I want custom recovery for micromax q417

After flashing the recovery.img file and rebooting my phone went to bootloop. Please help. Have I done any step wrong. I have exactly followed the step you said.

Rar file cant open.. Help

Will this run on the Marshmallow ROM of Micromax Canvas Mega 4G

I have ported TWRP 3.2.2 for q417
But I'm unable to provide link because I'm a new member... please help

yasirj said:
TWRP Recovery 3.0.2.3 For Micromax Canvas Mega 4G(Q417)
DOWNLOAD & INSTRUCTIONS:
How To Flash
1) First You Need To Your Mmc Mega Using Kingroot DOWNLOD & Install It From Here:https://play.google.com/store/apps/details?id=net.citra.kingroots&hl=en
2) DOWNLOAD & Install Flashify From Play Storehttps://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en
3) DOWNLOAD TWRP RECOVERY GIVEN LINK BELOW Extract The rar & Move To SD Card
4) Open Flashify App & Navigate Extracted Recovery Image File Click Yup Flash Click Reboot:good:
CONGRATULATIONS!!!
I'm not responsible for any damage to your device. Do this at your own risk.
Thanks To BouyaPK
DOWNLOED IT HERE: https://www.datafilehost.com/d/7907d78e
Click to expand...
Click to collapse
Or new twrp
https://androidfilehost.com/?fid=5862345805528041725
---------- Post added at 04:56 PM ---------- Previous post was at 04:55 PM ----------
https://androidfilehost.com/?fid=5862345805528041725

[RECOVERY] TWRP 3.0.3 For Micromax Unite 2

TWRP 3.0.3 Recovery Project​Disclaimer
Disclaimer
#include
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
ChangeLog For 3.0.3
Fixed issue with ext4 (Formatting in ext4 no longer takes a life.)
build ramdisk on LZMA
Builded DT on lz4c
Improve backup display names with emulated storage
Fix crash during check for TWRP app
Fill uid/gid for screenshots at compile time
Allow custom bootloader msg offset in block misc
ScreenShots
Click Here
Installation Instructions:silly:
By PC
What’s required:
USB Cable / PC
SP Flash Tool or MTK Flash Tool
ADB VCOM Drivers (normally I use PDAnet)
Scatter file for your phone
recovery.img
Click to expand...
Click to collapse
What to do:
Download and install the drivers
Download, extract and run SP Flash Tool
Click scatter loading on right side of SP Flash Tool and direct SPFT to where your scatter file is
Uncheck everything except for recovery
In the list of images in SPFT, click the recovery line and direct it to where your TWRP is saved
Click download at the top of SPFT
You’ll see a warning pop up letting you know that not all items are selected. Just click okay.
Remove the battery from your phone for a second and replace
Attach phone to PC via USB – At this point in the bottom of SPFT, you will see the preloader communicating with the PC. The bar at the bottom of SPFT may flash a couple of different colors, then you’ll see a green circle indicating it’s finished successfully.
Detach the phone
Boot into recovery by holding volUp + volDown+power and then hold volUP to boot into recovery
By Mobile
Download the recovery in phone or move it to phone.
Download Flashify (mobile uncle tool should work too, rename the TWRP.img to recovery.img and place it in sdcard root)
Open flashify and follow the screenshots.
Go To Flash Tap And Select Recovery Image
Select - Choose a file , Download the recovery.img and select this recovery from your dir
Tap on Yes and after successful recovery flash , reboot and enjoy
By Custom Recovery (CTR OR TWRP or CWM)
Download Recovery Flashable TWRP from the given link ... Flash It and then reboot to recovery
Bugs :- The Recovery Is Inverted As Our device Is Inverted ... Will be fixed soon
Download Links (Choose Carefully)
TWRP 3.0.3 - SP TOOL FLASHABLE AND FLASHIFY : Click Here - (9mb)
TWRP 3.0.3 - CUSTOM RECOVERY FLASHABLE : Click Here
Credits
Allah SWT
Vojtěch Hejsek for build from source
TeamWin
Dees Troy
Omni
LPAD
AMD Families
You & Me
HIT THANKS IT WLL NOT COST YOU !!!
XDA:DevDB Information
TWRP 3.0.3 For Micromax Unite 2, Tool/Utility for the Micromax A106 Unite 2
Contributors
manjot.gni, charansai, Ayush Rathore, Teamwin
Source Code: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Version Information
Status: Stable
Current Stable Version: 3.0.3
Stable Release Date: 2017-02-23
Created 2017-02-26
Last Updated 2017-02-26

Will this work to flash resurrection remix MM?
---------- Post added at 01:13 PM ---------- Previous post was at 12:50 PM ----------
its not flashing through flashify it gives error and yes i have rooted stock rom
---------- Post added at 01:22 PM ---------- Previous post was at 01:13 PM ----------
not flashing through mobile uncle tools also

Hey bro send me a link

Peter pan7034779691]I am kinda new to xda.... And therefore I don't know much about modding android.... But I have flashed many ROMs in my device (MMX u3) and also in some huawei devices ... ....
I have noticed that MMX u2 has many ROMs... Whereas its successor, MMX u3 don't have much.. . so. Can u plz guide me to port resurrection remix 5.6.7 for using in my micromax unite 3
THANKS IN ADVANCE

manjot.gni said:
TWRP 3.0.3 Recovery Project​Disclaimer
ChangeLog For 3.0.3
Fixed issue with ext4 (Formatting in ext4 no longer takes a life.)
build ramdisk on LZMA
Builded DT on lz4c
Improve backup display names with emulated storage
Fix crash during check for TWRP app
Fill uid/gid for screenshots at compile time
Allow custom bootloader msg offset in block misc
ScreenShots
Click Here
Installation Instructions:silly:
By PC
What’s required:
What to do:
Download and install the drivers
Download, extract and run SP Flash Tool
Click scatter loading on right side of SP Flash Tool and direct SPFT to where your scatter file is
Uncheck everything except for recovery
In the list of images in SPFT, click the recovery line and direct it to where your TWRP is saved
Click download at the top of SPFT
You’ll see a warning pop up letting you know that not all items are selected. Just click okay.
Remove the battery from your phone for a second and replace
Attach phone to PC via USB – At this point in the bottom of SPFT, you will see the preloader communicating with the PC. The bar at the bottom of SPFT may flash a couple of different colors, then you’ll see a green circle indicating it’s finished successfully.
Detach the phone
Boot into recovery by holding volUp + volDown+power and then hold volUP to boot into recovery
By Mobile
Download the recovery in phone or move it to phone.
Download Flashify (mobile uncle tool should work too, rename the TWRP.img to recovery.img and place it in sdcard root)
Open flashify and follow the screenshots.
Go To Flash Tap And Select Recovery Image
Select - Choose a file , Download the recovery.img and select this recovery from your dir
Tap on Yes and after successful recovery flash , reboot and enjoy
By Custom Recovery (CTR OR TWRP or CWM)
Download Recovery Flashable TWRP from the given link ... Flash It and then reboot to recovery
Bugs :- The Recovery Is Inverted As Our device Is Inverted ... Will be fixed soon
Download Links (Choose Carefully)
TWRP 3.0.3 - SP TOOL FLASHABLE AND FLASHIFY : Click Here - (9mb)
TWRP 3.0.3 - CUSTOM RECOVERY FLASHABLE : Click Here
Credits
Allah SWT
Vojtěch Hejsek for build from source
TeamWin
Dees Troy
Omni
LPAD
AMD Families
You & Me
HIT THANKS IT WLL NOT COST YOU !!!
XDA:DevDB Information
TWRP 3.0.3 For Micromax Unite 2, Tool/Utility for the Micromax A106 Unite 2
Contributors
manjot.gni, charansai, Ayush Rathore, Teamwin
Source Code: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Version Information
Status: Stable
Current Stable Version: 3.0.3
Stable Release Date: 2017-02-23
Created 2017-02-26
Last Updated 2017-02-26
Click to expand...
Click to collapse
I flashed it, but now my screen goes black when I go into recovery mode

Opens original recovery please help !!!