Hey guys
After the Update to 10.3 OS i have wake up issues. My screen dosent wake up.
I had the Same issue in the beta. When i try to wake up my Phone i see a flicker on my Screen. My Phone is working but the screen is black... On Android 9 i dont have this issue.
I have try to delet the cach, hard reset, delet root, flash stock Recovery, Fingerprint off, duble tab off but nothing is working. Sometimes i try to wake up my Phone after one Minute and then it work for one time... when the Display is on i can work normally.
Have anyone the self Problem?
Sorry for my bad English i try my best.
Did u try a factory reset?
This means returning the phone to it's stock state
Sent from my ONEPLUS A6003 using Tapatalk
RASTAVIPER said:
Did u try a factory reset?
This means returning the phone to it's stock state
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
Yes i have try this 3 Times...
Related
I just had a bootloop changing dalvik to art. Then it shutdown suddenly and there is no way to turn it on, i can't access to recovery or download mode, and it isn't recognized by the computer. Sorry for my english... Any advice?
I had the Nexus g beta 4 rom, with a clean installation, and it works fine with dalvik
Sure that the Battery is not completely drained?
Try this:
seapoint said:
According to Motorola Mobility, the solution to a fully discharged battery not restarting is to plug it in to charger and press & hold the power button for 18+ seconds, when the battery should resume charging.
Click to expand...
Click to collapse
mokkami said:
Sure that the Battery is not completely drained?
Try this:
Click to expand...
Click to collapse
I'll try when I get home and I'll post the results but I did the same several times, more than 10 seconds but no more than 18...
Sent from my Nexus 5 using Tapatalk
man look here, maybe can help
http://www.modaco.com/topic/367037-fix-recover-from-dead-battery-fix/
kaine666 said:
I just had a bootloop changing dalvik to art. Then it shutdown suddenly and there is no way to turn it on, i can't access to recovery or download mode, and it isn't recognized by the computer. Sorry for my english... Any advice?
I had the Nexus g beta 4 rom, with a clean installation, and it works fine with dalvik
Click to expand...
Click to collapse
Did you do anythigh else than switching to ART? I am asking, because you cannot brick your phone with ART. When you turn the phone on, it first runs the bootloader, the bootloader loads the kernel and only after that is the ROM loaded, which is the step where ART can cause problems.
In short - there is no way ART could have done anything to the bootloader or the kernel and thus it couldn´t have bricked the phone.
knizmi said:
Did you do anythigh else than switching to ART? I am asking, because you cannot brick your phone with ART. When you turn the phone on, it first runs the bootloader, the bootloader loads the kernel and only after that is the ROM loaded, which is the step where ART can cause problems.
In short - there is no way ART could have done anything to the bootloader or the kernel and thus it couldn´t have bricked the phone.
Click to expand...
Click to collapse
The phone get stuck into bootlop a lot of time when I changed to art. After that It shutdown, ¿0% battery? I don´t know but now I cannot turn it on anyway...
The battery can be the problem but, freeze It...? Would it affect to the moisture indicator?
Try pressing 45 secons button power until to device power on, after entry to CWM and restore backup or Stock ROM.
kykemejia said:
Try pressing 45 secons button power until to device power on, after entry to CWM and restore backup or Stock ROM.
Click to expand...
Click to collapse
No response
Sent from my Nexus 5 using Tapatalk
kaine666 said:
No response
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
thank you anyway
225 rpostdig
Loki[ITA] said:
man look here, maybe can help
http://www.modaco.com/topic/367037-fix-recover-from-dead-battery-fix/
Click to expand...
Click to collapse
Freeze the phone worked!!! Thank you sir, you save my phone!
Hi guys,
Today my phone started acting weird. After I locked the screen or it locked after 15 seconds, it wouldnt turn back on. Only way would be resetting the phone. After a couple of resets the screen just shows like a old tv with no signal(TV noise?). If I let the phone sit for a while I could turn it back on and get to recovery but it wouldnt go into the OS. I tried doing a factory reset on the recovery and I just get stuck on the "formatting data" screen.
Any way to recover from this?
Phone is completely stock. No root, locked bootloader,etc.
Thanks.
For how much time are you using your phone? It's sounds to me as hardware failure.
Sent from my Nexus 5 using Tapatalk
SpoonerPS3 said:
Hi guys,
Today my phone started acting weird. After I locked the screen or it locked after 15 seconds, it wouldnt turn back on. Only way would be resetting the phone. After a couple of resets the screen just shows like a old tv with no signal(TV noise?). If I let the phone sit for a while I could turn it back on and get to recovery but it wouldnt go into the OS. I tried doing a factory reset on the recovery and I just get stuck on the "formatting data" screen.
Any way to recover from this?
Phone is completely stock. No root, locked bootloader,etc.
Thanks.
Click to expand...
Click to collapse
Hey was it somewhat like this?
Simonna said:
For how much time are you using your phone? It's sounds to me as hardware failure.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Since late October I think. Yeah it sounds to me like hardware but the fact that the phone will work fine just until I locked the screen makes me think twice but well...
varuntis1993 said:
Hey was it somewhat like this?
Click to expand...
Click to collapse
Yep! Just like that.
SpoonerPS3 said:
Yep! Just like that.
Click to expand...
Click to collapse
It just happened with me once around 2 months ago but the device is working fine till now, a restart fixed it.
varuntis1993 said:
Hey was it somewhat like this?
Click to expand...
Click to collapse
varuntis1993 said:
It just happened with me once around 2 months ago but the device is working fine till now, a restart fixed it.
Click to expand...
Click to collapse
Well, just got it to start and it went straight to recovery. It went past formatting data and cache and phone restarted but problem is still there. RMA it is!
Thanks guys!
Hello,
I had latest PA, Uber kenel and Multirom installed. Suddenly my phone reboots and keeps to reboot. Only MultiRom is accessible for a greater amount of time. But reboots to, as well as fastboot and recovery does not even start.
Can someone please help me? :/ I would really appreciate an answer.
Return to stock. See if it still happens. First step in troubleshooting potential hardware issues
Sent from my Nexus 5 using Tapatalk
Try to get to bootloader from multirom which i believe is a modified twrp so tap reboot and then bootloader and tell us what it says or if its just a normal bootloader screen
Sent from my Nexus 5 using Tapatalk
May be the power button is stuck?? Try pressing it hard a few times and see if it loosens up??
- Sent from an IceCold Hammerhead!
rootSU said:
Return to stock. See if it still happens. First step in troubleshooting potential hardware issues
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
spinninbsod said:
Try to get to bootloader from multirom which i believe is a modified twrp so tap reboot and then bootloader and tell us what it says or if its just a normal bootloader screen
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
vin4yak said:
May be the power button is stuck?? Try pressing it hard a few times and see if it loosens up??
- Sent from an IceCold Hammerhead!
Click to expand...
Click to collapse
I cant return to stock because it keeps rebooting, so bootloader did not work too.
But @vin4yak was right button was stuck! And everything is back to normal. But thank you all for your quick replies
first of all i wanna tell you that my english is really bad
I have experienced black screen of death several times before and i've managed to recover from it by using key combination or my phone just recovers from it within 30 minutes when i haven't done anything but this time it is taking way too long and I'm not able to fix myself I'm on custom rom is there anyway to recover from black screen of death?
Hold the power button until it reboots.
thanks for replying but that doesn't work phone just vibrates and screen stays black i think phone is actually on but screen is not it even enters bootloader mode and i can do adb stuff on my pc
tmrasdf said:
thanks for replying but it when i do that doesn't work phone just vibrates and screen stays black it even enters bootloader mode and i can do adb stuff on my pc
Click to expand...
Click to collapse
If your can get into the bootloader I'd try flashing the factory image
Sent from my Nexus 5 using XDA Free mobile app
okay i will do that and give you an update about whether it fixed the problem or not
also can you guys give me some information about what causes black screen of death? i've searched on the google and was not able to find proper answer about it
jd1639 said:
If your can get into the bootloader I'd try flashing the factory image
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
it doesn't work i didn't have lollipop factory image so flashed kitkat and my screen is still black
tmrasdf said:
it doesn't work i didn't have lollipop factory image so flashed kitkat and my screen is still black
Click to expand...
Click to collapse
Then I'm afraid it's a hardware problem.
Sent from my Nexus 5 using XDA Free mobile app
tmrasdf said:
it doesn't work i didn't have lollipop factory image so flashed kitkat and my screen is still black
Click to expand...
Click to collapse
Does the screen function in bootloader? If not like jd said its hardware. Most likely the flex ribbon connection.
theesotericone said:
Does the screen function in bootloader? If not like jd said its hardware. Most likely the flex ribbon connection.
Click to expand...
Click to collapse
yeah i have just finished fixing it an was about to tell you guys that my phone is working now
i disassembled it and unplugged and replugged the cable beneath the speaker(ithe cable is connected to lcd so it might be the flex ribbon connection i have no idea) thank you guys for replying and helping me to solve this issue unfortunately,due to the downgrade my sdcard is erased and i lost my data but i'm glad that my phone is functioning properly :highfive:
Hey guys,
I have tried this several times to make sure.
If you boot the latest official twrp with no security code, everything works like a charm.
If you boot with security code ON, you only have 1 try to decrypt it. If you fail the code, it reboots itself and freezes the phone. Touch stops working, you have to power off. Is this the normal behaviour? It doesn't even warns about wrong code, it just freezes the entire phone.
Can you guys replicate the issue?
I had that too but thought i did something wrong while flashing...
Trinaaa said:
I had that too but thought i did something wrong while flashing...
Click to expand...
Click to collapse
Yes it is an undesirable feature of twrp. I hope that they will fix it soon
Sent from my OnePlus6 using XDA Labs
I wouldn't call it a feature just more a problem lol
Yeah happens to me too, I just end up holding the power button and going into bootloader and back to recovery.
I guess we'll have to wait for a fix then. thanks guys
It's a little weird on the SD 845 twrp they all have the same problem lol
It's happened on the OP5, 5T and now the OP6. It also happens on my Nexus 9 - however in my case it just boots straight back into TWRP if the codes wrong