Database Info

[Q] Can't download bt notification.apk for u8 smartwatch

I recently purchased a u8 smartwatch. I have a iphone 5. The problem I'm having is that I can't download the bt notification.apk
In instructions, it states to go ://211.144.196.251
Username: 123456
Password: 123456
However, when I attempt to go to that address, I keep getting the message (don't have permission). I can't get to the page to download the bt notification.apk. Does anyone know where I can download it so I can use the watch? Or a solution? I would greatly appreciate it.
Thanks again.

djrman75 said:
I recently purchased a u8 smartwatch. I have a iphone 5. The problem I'm having is that I can't download the bt notification.apk
In instructions, it states to go ://211.144.196.251
Username: 123456
Password: 123456
However, when I attempt to go to that address, I keep getting the message (don't have permission). I can't get to the page to download the bt notification.apk. Does anyone know where I can download it so I can use the watch? Or a solution? I would greatly appreciate it.
Thanks again.
Click to expand...
Click to collapse
Hi, I put the APK on MEGA for you
Have fun with it!
https://mega.co.nz/#!FgwB2KJC!xCdt7QEhAiAbZsRz2ATa5POzO8NQO89xpj3_Cj2zdpM

Help
I already download the files that you sent me but it doesnt work
What should i do
Can you help me
Thank you

patood5 said:
I already download the files that you sent me but it doesnt work
What should i do
Can you help me
Thank you
Click to expand...
Click to collapse
Sorry, I have seriously no idea how to help.
You installed the APK? You pair the phone with the smartwatch?

U8 messaging
hey!
With my U8 smart watch, every time i try opening the messaging folder (on the U8) it says "unfinished".
would anyone be able to help me?

nickavro said:
hey!
With my U8 smart watch, every time i try opening the messaging folder (on the U8) it says "unfinished".
would anyone be able to help me?
Click to expand...
Click to collapse
Im in the same boat. Also some of my apps work with it and some don't. I also can't block any of the apps even when i press the block button.

U8 smartwatch
dantheman1024 said:
Im in the same boat. Also some of my apps work with it and some don't. I also can't block any of the apps even when i press the block button.
Click to expand...
Click to collapse
Just reiceved my U8 smartwatch. Problem is, it will not pair with bluetooth to my android smartphone or phablet. The same code appears on both devices but will connect. Who has the same problem and a solution for this?
Best regards.
---------- Post added at 09:56 PM ---------- Previous post was at 09:46 PM ----------
dantheman1024 said:
Im in the same boat. Also some of my apps work with it and some don't. I also can't block any of the apps even when i press the block button.
Click to expand...
Click to collapse
In my last quote must read; will not connect!

Bluetooth pairing smartwatch ti Iphone 5S
Frank26 said:
Just reiceved my U8 smartwatch. Problem is, it will not pair with bluetooth to my android smartphone or phablet. The same code appears on both devices but will connect. Who has the same problem and a solution for this?
Best regards.
---------- Post added at 09:56 PM ---------- Previous post was at 09:46 PM ----------
In my last quote must read; will not connect!
Click to expand...
Click to collapse
I had the same problem and after a reset (small hole in bottom of watch with paperclip) paring went fine.
Best regards, Emile

Pairing has to done on both devices (watch and phone)
Ewdekler said:
I had the same problem and after a reset (small hole in bottom of watch with paperclip) paring went fine.
Best regards, Emile
Click to expand...
Click to collapse
Pairing has to done on both devices (watch and phone)

Uwatch download
In the original message, you forgot to say the ftp part when they said to go to, it is very important. After that, it will prompt for the user ID and password. THEN you have to click on the version of the watch you have and on the file with the extension .apk and allow the download. Then, one last step, to install it, use the File Manager app to locate it in the Download folder and click on that - this should allow you to start an installer. You may have to change the settings to allow installing from a source other than Google Play. My LG Android re-initialized and I had to re-install the notifier.

i have a Nexus 4 with stock Kitkat 4.4.4. I have installed the apk. All functions work except camera.
When I click the camera icon on the watch, my camera opens on the phone. But when I click the watch for a photo, though a shutter release sound is heard in the watch and the photo is displayed in the watch, my phone says, "Sorry, apk exception, will exit" and closes. The photo is nowhere found on the phone. The photo is not saved on the watch also.
After this the watch displays a message asking me to install the btnotifier in the phone. And subsequent to this, the music, camera and messages all display the same message. Before accessing the camera, all of them were working.
What am I doing wrong? Do I have to disable the options (phone audio and media audio) in bluetooth in the phone?
Anyone face this issue?

I have the same issue, with a Samsung S5, except it just randomly disconnects from Bluetooth and i get the error "Sorry, apk exception, will exit" i then need to reconnect for btnotifier to start again , kinda annoying and defeats the fact of having the watch in the 1st place,
Anybody have any ideas what might be causing the issue?
Thanks in advance :good:

That btnotification is crap. I have switched over to Smartwatch by rwatch. It is available in Playstore. It is very smooth and has no issues.
Try this.

Ewdekler said:
I had the same problem and after a reset (small hole in bottom of watch with paperclip) paring went fine.
Best regards, Emile
Click to expand...
Click to collapse
So when it says pairing, all you have to do is press the first bottom button.
Hope this helps?

u8 smart watch connection failer
Frank26 said:
Just reiceved my U8 smartwatch. Problem is, it will not pair with bluetooth to my android smartphone or phablet. The same code appears on both devices but will connect. Who has the same problem and a solution for this?
Best regards.
---------- Post added at 09:56 PM ---------- Previous post was at 09:46 PM ----------
In my last quote must read; will not connect!
Click to expand...
Click to collapse
hi i had the same issue but after pressing buttons on phone and watch found that if you press the menu button on the watch after you have clicked OK on the phone when pairing number comes up it pairs. hope this helps.

for lollipop users
for those trying to use the watch with lollipop, i found this app and its the only one working until now
go to play store and search for smartwatchbt4.0

I had real trouble with getting this to work under Lollipop on a Nexus 4, tried several versions og BTNotification etc.
In the end I've used the version at bit.ly/1xs6yoKIts a Pro version , it installs Smartwatch, It now actually dials out, captures pictures to watch... and controls music.. It gives a choice of front and rear camera , but both options use the rear camaera. In my case Google Music needs to have been opened , before the music option operates. But it does better than any other version I've found. The annoying install BTNotification response has disappeared.
It dialed out , but I had to use the phone to end call. Still not perfect but it functions.

How about U9?
androskyriacou said:
for those trying to use the watch with lollipop, i found this app and its the only one working until now
go to play store and search for smartwatchbt4.0
Click to expand...
Click to collapse
It connected app, but not bind with U9. Data not transfer to Nexus4. Do you have any suggestion? Please help. Thanks a lot.

lolipop working app
i found this "com.galapad.btnotification" app working for me with my U8 and lolipop 5.0.1 on nexus 5.
working: camara, music, notifications.

spralexx said:
i found this "com.galapad.btnotification" app working for me with my U8 and lolipop 5.0.1 on nexus 5.
working: camara, music, notifications.
Click to expand...
Click to collapse
bless you !

Can I disable Throw™ without root?

I tried to disable it via App settings, but was unable to. is there any other way? Because I suspect it interferring with my bluetooth connected moto360.

Yes you can, I wrote a post about it on the other bluetooth thread here (and also on reddit [1]). I also use an android watch (LG Urbane), and before turning off Throw, the bluetooth was super flaky, and it also failed to connect to my car.
[1] https://www.reddit.com/r/SonyXperia...onger_any_bluetooth_connection_problems_with/

kelvie said:
Yes you can, I wrote a post about it on the other bluetooth thread here (and also on reddit [1]). I also use an android watch (LG Urbane), and before turning off Throw, the bluetooth was super flaky, and it also failed to connect to my car.
[1] https://www.reddit.com/r/SonyXperia...onger_any_bluetooth_connection_problems_with/
Click to expand...
Click to collapse
Thank you! I'm looking into it

Hey guys, sorry to re-awaken old thread... do you know if this is possible at all without root?

From the reddit link in the post before yours:
> Anyway, you don't need to root, but you'll need to get the adb tool
Now whether you can manage it is another question entirely...

Sorry, I totally posted in the wrong thread there... was meaning to post in the disabling HDCP thread lol

I had to reset my phone. New firmware and no longer able to hide using adb... This did the trick for me. I guess I have to reset again, then update firmware?

Use the bluetoth settings
You can also stop Throw from starting by just going into Bluetooth settings for the device and unchecking contacts and phone and just leaving media on.
It might work with phone on too I haven't tried but this works fine just for music on my BT speaker.
No more connecting then Throw interfering and loppong off the connection a second or two later.

Honda Accord 2018 Sport and installing Apps

HI all,
So far I've been reading the threads here for the Civic and the Pilot for hacking the Honda head unit for installing Waze and Google Play Music, but nothing seems to work with the 2018 Accord, I may be missing something.. I don's seem to need anything else so far. Just getting tired of the slow charges, using my music just from my phone and having to turn on and off "Stay Awake" from the developers menu on my phone for Waze to get GPS signal. So I was thinking of just going back to Bluetooth Calls and using a 256GB drive in the USB with MP3 and FLAC files ad using Waze directly from the head unit. Will also like to install an app that will get rid of the 50hz bass roll-off from the head unit and a better EQ, 3 bands is not enough adjustment or I might just go and buy a DSR1 processor.
This is what I've done so far
1. Enable developers mode on the head unit.
2. Enable ADB
3. Go to the yellow diagnostics menu and check all settings, can't seem to find a wireless ADB setting or how to change from device/Host mode.
4. Extract the app info text from the app I want to install but cant find the White list file to update without going into device mode first to navigate the file structure.
My head unit is running Android 6 and all works fine, is just the small inconveniences. Thanks everyone for your help.

Have you had any luck connecting with ADB over USB? I've got a 2018 EX-L and haven't had any luck with ADB, putting the head into Device mode, or finding a way to enable the web browser. There doesn't seem to be a lot of information out there yet about the 2018 heads. I found a post on Reddit about how one guy was able to gain access to the web browser on a 2018 Pilot with a similar head, but that trick doesn't work on ours.

Not yet, still trying. Found something about an extra menu once the USB A to A is plugged into the computer but havent been able to try it yet. Once the USB cable is plugged into the computer, you have to hold the menu button to switch it to device mode. Hope that works
Sent from my SM-G950U using Tapatalk

broly10000 said:
Not yet, still trying. Found something about an extra menu once the USB A to A is plugged into the computer but havent been able to try it yet. Once the USB cable is plugged into the computer, you have to hold the menu button to switch it to device mode. Hope that works
Click to expand...
Click to collapse
Was that on a 2018 model? Any chance you can send me the link to that post?

That's on the civic and pilot threads.
Civic 2017
https://forum.xda-developers.com/showthread.php?t=3621582
Cant find the pilot thread now
Sent from my SM-G950U using Tapatalk

broly10000 said:
That's on the civic and pilot threads.
Civic 2017
https://forum.xda-developers.com/showthread.php?t=3621582
Cant find the pilot thread now
Click to expand...
Click to collapse
Yeah, only some of that is applicable to us. For 2018, hold Power, Home, and Source to enter the first hidden menu, then hold Home to enter the second hidden menu. Still haven't figured out how to get to the third menu, where you can change the device mode.

I'll try it again this weekend. With long hours at work and making head unit bypass and mercman mini harnesses for the 9th Gen, it's sometimes hard to get this stuff done. Havent been able to install my new speakers, DSP and amp either.
Sent from my SM-G950U using Tapatalk

The hack that was discovered to work on the 2018 Odyssey with a very similar head unit has been fixed on ours. I keep trying to get creative, but it seems like Honda is finally working to lock these down...

Damn, I was hoping on installing a 256GB HDD, Waze and a Google Play Music. I'll be trying this weekend again for the hack and seeing what I can find. With Android there's always a way. I could try see I I can boot in in download or recovery mode and installing SU. Honda needs a way to service these, all we have to do is find it.
Sent from my SM-G950U using Tapatalk

Browser
So I’m not certain how or if it helps, but I have been able to get access to the web browser on my 18 Accord.

I got access to it too. What we need is a working ADB session yoneither oush SU, or reboot in download or recovery mode. And that will be our next roadblock, finding out if we can push files in recovery.
Sent from my SM-G950U using Tapatalk

Stunod7 said:
So I’m not certain how or if it helps, but I have been able to get access to the web browser on my 18 Accord.
Click to expand...
Click to collapse
How, pray tell?
---------- Post added at 02:54 AM ---------- Previous post was at 02:51 AM ----------
broly10000 said:
I got access to it too. What we need is a working ADB session yoneither oush SU, or reboot in download or recovery mode. And that will be our next roadblock, finding out if we can push files in recovery.
Click to expand...
Click to collapse
And have you figured out how to get into Recovery mode yet?

Nope, still trying with limited time.
Sent from my SM-G950U using Tapatalk

broly10000 said:
Nope, still trying with limited time.
Click to expand...
Click to collapse
Ok. How did you get into the web browser?

seandop said:
Ok. How did you get into the web browser?
Click to expand...
Click to collapse
I'll be honest, I don't know how repeatable this is, but here is how I went about it.
I did a factory reset on the stereo to troubleshoot something else. Imgur album below that kind of follows along. After I did a reset I noticed a new icon on the top bar in the spot just to the left of the clock. It resembled a cellular/wifi strength indicator with a question mark. When tapping it I would go to the system status screen where a new line appeared that reads "Sign in to network" with the options of "Open" or "Dismiss". When I click "Open" it would bring me to a bit of a controlled browser titled "Sign in to network" that has a hyperlink that lists there is a security issue with the website it's trying to direct me to. On that page it gives me the option to "Continue anyway via browser". When I click that, it launches a full browser and I can get to anywhere, as long as I'm on wifi.
If I screw up at any point, or close down the browser, or go home, I have to shut my car off for a few minutes, turn it back on and the question mark returns.
imgur.com/gallery/MTLzN

Do you think Panasonic service manuals or Honda manuals are needed?
Step 1 has to be able to tell the headunit to receive.
Would a Honda tech need this?
Sounds more like for programmers at Panasonic.
I will search and see who else uses Panasonic maybe mind a clue.

Thank you for helping with the search. Yes, we use panasonic for the Basic trim and 1.5t Sport. Not sure for the 2.0T.
Sent from my SM-G950U using Tapatalk

scoop_dtx said:
Do you think Panasonic service manuals or Honda manuals are needed?
Step 1 has to be able to tell the headunit to receive.
Would a Honda tech need this?
Sounds more like doors for programmers at Panasonic.
I will search and see who else uses Panasonic maybe mind a clue.
Click to expand...
Click to collapse
I did some quick searching last week and came up mostly empty. Presumably there's a manual somewhere that details how to put the unit into Device mode and/or enter recovery mode.

seandop said:
I did some quick searching last week and came up mostly empty. Presumably there's a manual somewhere that details how to put the unit into Device mode and/or enter recovery mode.
Click to expand...
Click to collapse
Check out this manual. I couldnt find anything for device mode. See if you can find anything.
https://1drv.ms/b/s!ArDVDBmfsf5b4lzpNJ26YDcMYaao
Sent from my SM-G950U using Tapatalk

broly10000 said:
Check out this manual. I couldnt find anything for device mode. See if you can find anything.
https://1drv.ms/b/s!ArDVDBmfsf5b4lzpNJ26YDcMYaao
Click to expand...
Click to collapse
Thanks for the share. Unfortunately, or didn't teach me anything new. :/ I also spent the $20 for access to Honda's tech info site with their thousands of service manuals, bulletins, and updates. Nothing useful there, either. I think we need a Panasonic Automotive manual.

Seicane Android 9 won't update time after turn off engine

Hello all I need help!
Just bought a seicane H286 MTCE_HF_V3.07_1 9" android 9 everything looks good except for the clock. everytime I turn off the engine and the time is 2:15pm, when I turn the engine back on 30mins or however long later the clock is starting at 2:15pm and counting. I toggled update time with GPS on/off, I toggled update with carrier on/off but nothing work. The only time it's update the time with GPS is when I reset the unit. really frustrating with tech support they keep insisting that the unit is automatically update time with gps! If anyone have any solution please help. thank you.

Yes, this is a known issue, search forums for details on update or contact reseller for support/update.

hello, even my autoradio (wondefoo) rh3368 mtce_cz, cpu octacore cortex-a53 @ 1.5 android 9 has your same problem ... surely there is a software bug, the seller told me that he will send me an update. .. ps to the most expert: is it possible to downgrade from android 9 to 8 without risking ?

ilfn143 said:
Hello all I need help!
Just bought a seicane H286 MTCE_HF_V3.07_1 9" android 9 everything looks good except for the clock. everytime I turn off the engine and the time is 2:15pm, when I turn the engine back on 30mins or however long later the clock is starting at 2:15pm and counting. I toggled update time with GPS on/off, I toggled update with carrier on/off but nothing work. The only time it's update the time with GPS is when I reset the unit. really frustrating with tech support they keep insisting that the unit is automatically update time with gps! If anyone have any solution please help. thank you.
Click to expand...
Click to collapse
I recently purchased a 10.1 Seicane H2038 rk3368 unit that seems to be using the same MTCE_HF_V3.07_1 firmware. I also had an issue with the time being incorrect when returning from sleep. I was able to correct the issue by updating the android OS to the latest available (in the Daisata updates thread) HA_px5_9.0_ota(20190521) - please note that that this performed a data reset when applying.
There appears to be a newer PX5 HA_px5_9.0_ota(20190528) firmware posted now that I have not tested, but I assume that should work as well:
https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
I did not upgrade the MCU firmware.

If I know how to root it I can install clocksync and have it automatically sync the clock to gps signal

ilfn143 said:
If I know how to root it I can install clocksync and have it automatically sync the clock to gps signal
Click to expand...
Click to collapse
Or read the second post....

ilfn143 said:
Hello all I need help!
Just bought a seicane H286 MTCE_HF_V3.07_1 9" android 9 everything looks good except for the clock. everytime I turn off the engine and the time is 2:15pm, when I turn the engine back on 30mins or however long later the clock is starting at 2:15pm and counting. I toggled update time with GPS on/off, I toggled update with carrier on/off but nothing work. The only time it's update the time with GPS is when I reset the unit. really frustrating with tech support they keep insisting that the unit is automatically update time with gps! If anyone have any solution please help. thank you.
Click to expand...
Click to collapse
yesterday I installed the version ha_px5_9_ota and the problem of updating the timetable has been solved, the only problem is that as equalization power and audio volume is less than the original rom.

I solved it by rooting it and using tasker. What I found out was whenever I toggle location on and off the timeupdate to gps time, so I used tasker to toggle it.
First I rooted by using adb method found here: https://forum.xda-developers.com/an...5-mtcd-e-head-unit-discussion-thread-t3734189 (very helpful to watch the youtube video)
be sure to install hacker's keyboard from play store and use notepad++ on your pc. not sure why regular keyboard didn't work in terminal emulator. I had to root twice for it to work.
install tasker, in profile I set "Display State" to "on" so every time I turn on the car it'll run the task. In task I set it to wait 5 seconds, turn off location, wait a second and turn it back on.
go back to adb on pc and run command: adb shell pm grant net.dinglisch.android.taskerm android.permission.WRITE_SECURE_SETTINGS
that's it! now whenever I turn on the car it'll take a couple seconds to set the correct time.

hello, I have finished configuring everything and I must say that I am very satisfied with this version, if I can afford to give you some advice ... try installing it also because it seems better to receive gps satellites and do not need other applications to update the 'schedule.

My hu has Carplay built in and don’t want to risk it with a new rom

would it be the carplay?

mrt.angelo69 said:
would it be the carplay?
Click to expand...
Click to collapse
Apple Carplay

ilfn143 said:
First I rooted by using adb method found here: https://forum.xda-developers.com/an...5-mtcd-e-head-unit-discussion-thread-t3734189
Click to expand...
Click to collapse
Which method exactly?

kebul said:
Which method exactly?
Click to expand...
Click to collapse
Post #3

Any body have any version of mtce_hf plz

Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk

I have a seicane radio in my ram truck, everything works well but I can't change the balance or fader, any ideas on how to correct this?
Sent from my VS996 using Tapatalk

moeduss said:
I have a seicane radio in my ram truck, everything works well but I can't change the balance or fader, any ideas on how to correct this?
Click to expand...
Click to collapse
What version of Android?

C75 said:
What version of Android?
Click to expand...
Click to collapse
Android 8
Sent from my VS996 using Tapatalk

moeduss said:
Android 8
Click to expand...
Click to collapse
Try installing this app on you HU and see if it works for you.
https://play.google.com/store/apps/details?id=jp.pioneer.mle.soundtune

Android Pie * problems and disadvantages

Hi.android pie have a great bug
1. hotspot not working when use mobile data.
2.adaway not working
3.apn mobile data not working
Continue by you ....

mehrdad_esmaeeli said:
Hi.android pie have a great bug
1. hotspot not working when use mobile data.
2.adaway not working
3.apn mobile data not working
Continue by you ....
Click to expand...
Click to collapse
I installed pie yesterday (need to flash ruu and after that do ota etc.) and everything is working fine. Hotspot works at 2.4 and 5 GHz, adaway works fine systemless (need to check this option in Magisk), mobile data also works (LTE +, VoLTE). Maybe you did something wrong?

apek862002 said:
I installed pie yesterday (need to flash ruu and after that do ota etc.) and everything is working fine. Hotspot works at 2.4 and 5 GHz, adaway works fine systemless (need to check this option in Magisk), mobile data also works (LTE +, VoLTE). Maybe you did something wrong?
Click to expand...
Click to collapse
What's your build number?
My build number is 401
I have a ruu rom
When hotspot is on mobile data not work.

mehrdad_esmaeeli said:
What's your build number?
My build number is 401
I have a ruu rom
When hotspot is on mobile data not work.
Click to expand...
Click to collapse
My build is the same. CID 034.

apek862002 said:
My build is the same. CID 034.
Click to expand...
Click to collapse
My cid HTC__j15

mehrdad_esmaeeli said:
Hi.android pie have a great bug
1. hotspot not working when use mobile data.
2.adaway not working
3.apn mobile data not working
Continue by you ....
Click to expand...
Click to collapse
Ye factory reset kon fix mishe

ALiARies said:
Ye factory reset kon fix mishe
Click to expand...
Click to collapse
Nashode

Since upgrading my single SIM UK HTC u11 to Pie the notification cards in the drawer are doubling up for some apps. I've noticed this with Sonos Controller app and Google Maps commute information notification. Its like there is a notification within the notification...

The hotspot is working fine for me (3.31.401.1 and Cid 34).
I have a huge battery drain due to Google play services and the location is bit slower than Oreo (takes more time to show the current location).
I have noticed some scroll issues in YouTube and Twitter.
Sense companion is not counting steps correctly and some days there is no notification with the steps resume.
Digital wellbeing and adaptative battery are hidden (you have to search for them). I think they should be into the settings menu.

Pantumaca said:
Digital wellbeing and adaptative battery are hidden (you have to search for them). I think they should be into the settings menu.
Click to expand...
Click to collapse
Where is adaptive battery hidden? Only place that I could even remotely find it is in developer options and even then it is just the bucket options for the apps.
---------- Post added at 10:18 AM ---------- Previous post was at 09:43 AM ----------
Anyone who wants to see "Adaptive Battery" in your Battery settings install:
https://www.apkmirror.com/apk/google-inc/device-health-services/
That APK. Then go back into your battery settings and you should now see Adaptive Battery. So it does exist but highly possible HTC "forgot" the APK to "enable" it since this update does look to be a bit "rushed".

Anakha56 said:
Where is adaptive battery hidden? Only place that I could even remotely find it is in developer options and even then it is just the bucket options for the apps.
---------- Post added at 10:18 AM ---------- Previous post was at 09:43 AM ----------
Anyone who wants to see "Adaptive Battery" in your Battery settings install:
https://www.apkmirror.com/apk/google-inc/device-health-services/
That APK. Then go back into your battery settings and you should now see Adaptive Battery. So it does exist but highly possible HTC "forgot" the APK to "enable" it since this update does look to be a bit "rushed".
Click to expand...
Click to collapse
In the search box under settings search for "battery". The 2nd or 3th result says administrator (sorry, I use Spanish and I do not know how it appears in English).
What you say that shows under developer options is the state of the apps that the system manage.

Pantumaca said:
In the search box under settings search for "battery". The 2nd or 3th result says administrator (sorry, I use Spanish and I do not know how it appears in English).
What you say that shows under developer options is the state of the apps that the system manage.
Click to expand...
Click to collapse
In English "Battery Manager" . So now there are two odd ways to get this adaptive battery, fyi installing the APK also gets access to adaptive brightness. It changes auto brightness to adaptive brightness.

Hi,
I have HTC U11, Slovenia-Europe, we recived Android 9.0 in monday (2nd september 2019) and i have next problems:
- app "people" - don't open any contact
- phone is quiet - no ringing, no nostification no any sound…
- not download attachment from e-mail (e-maill app, gmail app, gmail browser…)
- if i have choise default ringtone no any sound in list...
- app foto not seen any photo, only silver square
After reset is all OK until the first call or first e-mail with attachment, and afre call or attachent is same ****… reset and next round…
PLEASE HELP..
[email protected]

issues on Dialer
hello, non native american speaker here.
I have installed lineage 16 on my HTC U11 according to this instruction.
I have massieve issues on the dialer. i can dial numbers but i can't hear anyone. i can't hear a dial tone either.
Slide (reddit) and SatStat crasches my phone. Everything else works fine, it seems.
Maybe someone can help me to fix this.
Thanks in advance!