I recently purchased a u8 smartwatch. I have a iphone 5. The problem I'm having is that I can't download the bt notification.apk
In instructions, it states to go ://211.144.196.251
Username: 123456
Password: 123456
However, when I attempt to go to that address, I keep getting the message (don't have permission). I can't get to the page to download the bt notification.apk. Does anyone know where I can download it so I can use the watch? Or a solution? I would greatly appreciate it.
Thanks again.
djrman75 said:
I recently purchased a u8 smartwatch. I have a iphone 5. The problem I'm having is that I can't download the bt notification.apk
In instructions, it states to go ://211.144.196.251
Username: 123456
Password: 123456
However, when I attempt to go to that address, I keep getting the message (don't have permission). I can't get to the page to download the bt notification.apk. Does anyone know where I can download it so I can use the watch? Or a solution? I would greatly appreciate it.
Thanks again.
Click to expand...
Click to collapse
Hi, I put the APK on MEGA for you
Have fun with it!
https://mega.co.nz/#!FgwB2KJC!xCdt7QEhAiAbZsRz2ATa5POzO8NQO89xpj3_Cj2zdpM
Help
I already download the files that you sent me but it doesnt work
What should i do
Can you help me
Thank you
patood5 said:
I already download the files that you sent me but it doesnt work
What should i do
Can you help me
Thank you
Click to expand...
Click to collapse
Sorry, I have seriously no idea how to help.
You installed the APK? You pair the phone with the smartwatch?
U8 messaging
hey!
With my U8 smart watch, every time i try opening the messaging folder (on the U8) it says "unfinished".
would anyone be able to help me?
nickavro said:
hey!
With my U8 smart watch, every time i try opening the messaging folder (on the U8) it says "unfinished".
would anyone be able to help me?
Click to expand...
Click to collapse
Im in the same boat. Also some of my apps work with it and some don't. I also can't block any of the apps even when i press the block button.
U8 smartwatch
dantheman1024 said:
Im in the same boat. Also some of my apps work with it and some don't. I also can't block any of the apps even when i press the block button.
Click to expand...
Click to collapse
Just reiceved my U8 smartwatch. Problem is, it will not pair with bluetooth to my android smartphone or phablet. The same code appears on both devices but will connect. Who has the same problem and a solution for this?
Best regards.
---------- Post added at 09:56 PM ---------- Previous post was at 09:46 PM ----------
dantheman1024 said:
Im in the same boat. Also some of my apps work with it and some don't. I also can't block any of the apps even when i press the block button.
Click to expand...
Click to collapse
In my last quote must read; will not connect!
Bluetooth pairing smartwatch ti Iphone 5S
Frank26 said:
Just reiceved my U8 smartwatch. Problem is, it will not pair with bluetooth to my android smartphone or phablet. The same code appears on both devices but will connect. Who has the same problem and a solution for this?
Best regards.
---------- Post added at 09:56 PM ---------- Previous post was at 09:46 PM ----------
In my last quote must read; will not connect!
Click to expand...
Click to collapse
I had the same problem and after a reset (small hole in bottom of watch with paperclip) paring went fine.
Best regards, Emile
Pairing has to done on both devices (watch and phone)
Ewdekler said:
I had the same problem and after a reset (small hole in bottom of watch with paperclip) paring went fine.
Best regards, Emile
Click to expand...
Click to collapse
Pairing has to done on both devices (watch and phone)
Uwatch download
In the original message, you forgot to say the ftp part when they said to go to, it is very important. After that, it will prompt for the user ID and password. THEN you have to click on the version of the watch you have and on the file with the extension .apk and allow the download. Then, one last step, to install it, use the File Manager app to locate it in the Download folder and click on that - this should allow you to start an installer. You may have to change the settings to allow installing from a source other than Google Play. My LG Android re-initialized and I had to re-install the notifier.
i have a Nexus 4 with stock Kitkat 4.4.4. I have installed the apk. All functions work except camera.
When I click the camera icon on the watch, my camera opens on the phone. But when I click the watch for a photo, though a shutter release sound is heard in the watch and the photo is displayed in the watch, my phone says, "Sorry, apk exception, will exit" and closes. The photo is nowhere found on the phone. The photo is not saved on the watch also.
After this the watch displays a message asking me to install the btnotifier in the phone. And subsequent to this, the music, camera and messages all display the same message. Before accessing the camera, all of them were working.
What am I doing wrong? Do I have to disable the options (phone audio and media audio) in bluetooth in the phone?
Anyone face this issue?
I have the same issue, with a Samsung S5, except it just randomly disconnects from Bluetooth and i get the error "Sorry, apk exception, will exit" i then need to reconnect for btnotifier to start again , kinda annoying and defeats the fact of having the watch in the 1st place,
Anybody have any ideas what might be causing the issue?
Thanks in advance :good:
That btnotification is crap. I have switched over to Smartwatch by rwatch. It is available in Playstore. It is very smooth and has no issues.
Try this.
Ewdekler said:
I had the same problem and after a reset (small hole in bottom of watch with paperclip) paring went fine.
Best regards, Emile
Click to expand...
Click to collapse
So when it says pairing, all you have to do is press the first bottom button.
Hope this helps?
u8 smart watch connection failer
Frank26 said:
Just reiceved my U8 smartwatch. Problem is, it will not pair with bluetooth to my android smartphone or phablet. The same code appears on both devices but will connect. Who has the same problem and a solution for this?
Best regards.
---------- Post added at 09:56 PM ---------- Previous post was at 09:46 PM ----------
In my last quote must read; will not connect!
Click to expand...
Click to collapse
hi i had the same issue but after pressing buttons on phone and watch found that if you press the menu button on the watch after you have clicked OK on the phone when pairing number comes up it pairs. hope this helps.
for lollipop users
for those trying to use the watch with lollipop, i found this app and its the only one working until now
go to play store and search for smartwatchbt4.0
I had real trouble with getting this to work under Lollipop on a Nexus 4, tried several versions og BTNotification etc.
In the end I've used the version at bit.ly/1xs6yoKIts a Pro version , it installs Smartwatch, It now actually dials out, captures pictures to watch... and controls music.. It gives a choice of front and rear camera , but both options use the rear camaera. In my case Google Music needs to have been opened , before the music option operates. But it does better than any other version I've found. The annoying install BTNotification response has disappeared.
It dialed out , but I had to use the phone to end call. Still not perfect but it functions.
How about U9?
androskyriacou said:
for those trying to use the watch with lollipop, i found this app and its the only one working until now
go to play store and search for smartwatchbt4.0
Click to expand...
Click to collapse
It connected app, but not bind with U9. Data not transfer to Nexus4. Do you have any suggestion? Please help. Thanks a lot.
lolipop working app
i found this "com.galapad.btnotification" app working for me with my U8 and lolipop 5.0.1 on nexus 5.
working: camara, music, notifications.
spralexx said:
i found this "com.galapad.btnotification" app working for me with my U8 and lolipop 5.0.1 on nexus 5.
working: camara, music, notifications.
Click to expand...
Click to collapse
bless you !
Related
Wear GoPro Remote is an Android Wear application that allows full control of a GoPro camera.
Some features are:
Change camera mode (Video, Photo, Burst, Time lapse)
Change video resolution and frame rate.a
Change Time lapse interval.
Fire shutter to take pictures, start/stop video and see a small preview of the picture taken.
Fire shutter by shaking your hand (Great for selfies).
Image gallery to browse images on Camera.
Set basic settings like Spot Meter, Beep volume, Upside down, LEDs.
Locate camera.
Power off/on camera.
Things to do
Make compatible with all GoPro models (currently tested on Hero3 White only).
Live preview on watch (Nice to have but not essential).
Improve UI design.
Test on round watches.
New icons.
Code documentation.
Correct battery indicator.
Autodetect GoPro WiFi password.
Unit tests.
Publish on Google Play.
Please feel free to suggest improvements, fixes, and enhancements and report any bug you found.
Open Source under Apache Software Licence at github.com \ hmrs-cr \ android-wear-gopro-remote
Version history:
v1.0-12 (01/10/2015):
Maintenance release, no significant new features are included in this release.
Added Material Design Theme.
Added "first run dialog" to help configure GoPro WiFi settings.
Improved stability.
Fixed many "force close" issues.
Option to disable app start up when device connected to GoPro WiFi (disabled by default).
v1.0-11 (12/29/2014):
Maintenance release, no significant new features are included in this release.
New launcher Icon.
Improved connection error handling between watch and phone.
Autoconfig GoPro WiFi name and password if phone connected to GoPro WiFi.
Added "Send Log" menu option to send logs and camera info to help diagnose issues.
v1.0-10 (12/21/2014):
First public release
This is awesome! I don't have android wear yet, but planning on getting a moto 360 soon. I have a Hero 4 Silver and was thinking this would be an extremely useful app to have on your wrist, thanks for your work, can't wait to try it out!
Deathalo said:
This is awesome! I don't have android wear yet, but planning on getting a moto 360 soon. I have a Hero 4 Silver and was thinking this would be an extremely useful app to have on your wrist, thanks for your work, can't wait to try it out!
Click to expand...
Click to collapse
Thanks, please keep in mind that I have tested this app only with the Hero3 White Edition, probably you will find issues with other models .
hmrscr said:
Thanks, please keep in mind that I have tested this app only with the Hero3 White Edition, probably you will find issues with other models .
Click to expand...
Click to collapse
This is just what i thought was missing for the gopro.
I will be able to test it with a moto360 and a gopro hero4 silver in a couple of days and let you know the issues.
Thanks a lot for the work you've already done.
Very Very Cool
Hey. This is a great idea and thanks for your hard work to develop it. I tried to get the app to work but I can only seem to view the images saved to my GoPro and cant operate any of the the features which you described.
I have my Note 4 connected to my GoPro Hero 3+ via wifi and my Samsung Wear Live connected to my Note 4 via Bluetooth. I cant seem to be able to connect to my GoPro with your app. Any suggestions?? Thx much.
Lindasteelers said:
Hey. This is a great idea and thanks for your hard work to develop it. I tried to get the app to work but I can only seem to view the images saved to my GoPro and cant operate any of the the features which you described.
I have my Note 4 connected to my GoPro Hero 3+ via wifi and my Samsung Wear Live connected to my Note 4 via Bluetooth. I cant seem to be able to connect to my GoPro with your app. Any suggestions?? Thx much.
Click to expand...
Click to collapse
If you are able to see in your watch the images in your GoPro then that means that the connection between the GoPro and the phone and between the phone and the watch is working good. What do you see in your watch when trying to operate the camera?
I have released a new version with an option to send camera info and logs that will help me to understand the cause of issues like this. Please install the new version, connect your phone to the GoPro wifi network, open the App on the phone, selected the menu item "Send Log" and please send me that information with your favorite email app, you will be able to review the information that will be send or add anything you want.
I can not connect my gopro hero 4 Silver to the App. The Problem is that the App is Searching for a Connection (screenshot 1) and after ~ 5 seconds, the app will close. If i connect Via Wifi to my gopro (Screenshot 2) the App will closes directly.
Sorry for my bad english
It's working.
Thanks for the response. I went back and checked all of the settings and noticed that I had entered the wrong password for the Gopro Wifi Settings. User error of course. Sorry for the inconvenience and thanks again for cool app.
hmrscr said:
If you are able to see in your watch the images in your GoPro then that means that the connection between the GoPro and the phone and between the phone and the watch is working good. What do you see in your watch when trying to operate the camera?
I have released a new version with an option to send camera info and logs that will help me to understand the cause of issues like this. Please install the new version, connect your phone to the GoPro wifi network, open the App on the phone, selected the menu item "Send Log" and please send me that information with your favorite email app, you will be able to review the information that will be send or add anything you want.
Click to expand...
Click to collapse
Really cool. Next week I think I'll buy me a $125 g watch from amazon.
Sent from my Nexus 5 using Tapatalk
moto 360 and samsung note 3
Hello. I have problems the app forces close on the note 3 and i cant make a change. It just forces close.When I try to connect using the moto 360 I can see images from the gropro but cant make any changes. The the app on the watch says camera wifi not configured.
SchnickersX said:
I can not connect my gopro hero 4 Silver to the App. The Problem is that the App is Searching for a Connection (screenshot 1) and after ~ 5 seconds, the app will close. If i connect Via Wifi to my gopro (Screenshot 2) the App will closes directly.
Sorry for my bad english
Click to expand...
Click to collapse
As I can see in screenshot 1, you haven't configured the WiFi settings, you need to set the "WiFi SSID" field with the name of your GoPro Wifi and "WiFi Password" with the WiFi password of your GoPro.
Also you can connect the phone to the GoPro WiFi and open the app, it will try to set the settings automatically for you.
hmrscr said:
As I can see in screenshot 1, you haven't configured the WiFi settings, you need to set the "WiFi SSID" field with the name of your GoPro Wifi and "WiFi Password" with the WiFi password of your GoPro.
Also you can connect the phone to the GoPro WiFi and open the app, it will try to set the settings automatically for you.
Click to expand...
Click to collapse
I cannot click the two fields for filling out.
If i connect the phone to the gopro the app closes immediately.
has it something to do with android 5.0?
my LG G3 also force closes and I can't seem to get it to auto-detect or update the fields manually
edit: I got it to update and connect, toggled my wifi off then opened the Remote app and it autodetected the settings, seems to work okay but I can't seem to get back to the main screen easilly, by that i mean my watchface
GTiceman said:
my LG G3 also force closes and I can't seem to get it to auto-detect or update the fields manually
edit: I got it to update and connect, toggled my wifi off then opened the Remote app and it autodetected the settings, seems to work okay but I can't seem to get back to the main screen easilly, by that i mean my watchface
Click to expand...
Click to collapse
SchnickersX said:
I cannot click the two fields for filling out.
If i connect the phone to the gopro the app closes immediately.
has it something to do with android 5.0?
Click to expand...
Click to collapse
I have fixed some "force close" issues, also there's a new "first run" dialog to help you configure the WiFi settings. Please download the new update and try again.
thumbs up, works pretty well
Lets keep it going
Hi everybody
I had a GoPro HERO2 (rusty one from 2011), I have a GoPro HERO3 Black, +Black, HERO4 Black cameras. Here is my work of documenting the commands of these cameras to control via WiFi: (damn I am new!!!) github dot com/konradit/goprowifihack
I was going to do an app too but there is this app too, why not merge? In the repo there are ALL of the HERO2/HERO3 Black commands for wifi control, will release HERO4 commands soon. The White / Silver / HERO2 work the same, this means commands are the same. The HERO3 Black and the HERO3+Black are more advanced and have different structures. The HERO4 Black and Silver are completely different from past structures.
Lets get this app up to date with all cameras and maybe voice commanding?
Thanks for this... I've never touched Android development, but this and WearBucks failing after AW5 update has pushed me to get my STS setup for it.
It's awesome to have some of this working so far on my 3+B.
great app!
First of all, thank you for this amazing it's really a great idea! :good:
I have, two question:
1) Why don't you release this one on the playstore? it would have a lot more user =)
2) I was thinking about a fonctionnality: would it be possible to add a "bookmark" button, during the shot of a video? (ultimately it would add a chapter in the mp4[limited by GoPro API I think...], but writing the timestamp in a file would be a nice first step) To help editing those video and retrieving the important moment of each video file.
[ If you have a public git for that, I would be glad to help implement that ]
You mean the HiLight tag for the H4?
Sent from my Nexus 6 using XDA Free mobile app
konradit said:
You mean the HiLight tag for the H4?
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah same system, but for every H generation. And usable in any video editing software not just the gopro studio.
A simple text (or json xml etc...) file, with some timestamp, will do the trick.
can we compile a list of incompatible issues of all non-samsung phone?
as i know, non-samsung phone ...
1 ) no message app
2) cannot get paid apps
3) no accept call green button.
... any others?
Hi there !
Just got my Gear S2 Classic.
My phone is Huawei Honor 7 and, bad luck, Gear app was not compatbile with my phone (message "not available for your phone" on Android Play Store)
So, I've install all what was needed on my Wife's Sony Z3 compact
I've transferred the APK on my Honor 7 and ..... It worked !!
There are 3 APK to install
I am having another problem which I am pretty sure is due to not having a Samsung phone (nexus 6 running AICP).
I cannot log in to my Samsung account to download any apps (or I think to get app upgrades). When I first attach the watch after a reset I can access my Samsung account but after about a day I can no longer do so getting a message that due to inactivity my account has been logged out. When I try to log in, I get a progress circle for about 10 seconds and nothing happens.
Not a big deal since there are very few apps in which I am interested but annoying nonetheless.
Fred
regis59 said:
Hi there !
Just got my Gear S2 Classic.
My phone is Huawei Honor 7 and, bad luck, Gear app was not compatbile with my phone (message "not available for your phone" on Android Play Store)
So, I've install all what was needed on my Wife's Sony Z3 compact
I've transferred the APK on my Honor 7 and ..... It worked !!
There are 3 APK to install
Click to expand...
Click to collapse
then, can you reply sms message and read sms history?
can you download app at galaxy app store?
Hi all , i got . 1. screen on huawei p8max , bluetooth connects , screen of disconnects, yes i have put in permission manager.
2. when i drive , connects and works, get out of car , disconects, is there a drive profile etc am missing?
3. stereo bluetooth headphones connect direct to gear but sound cuts out , very choppy , has anybody tried this?
iantaylor27 said:
Hi all , i got . 1. screen on huawei p8max , bluetooth connects , screen of disconnects, yes i have put in permission manager.
2. when i drive , connects and works, get out of car , disconects, is there a drive profile etc am missing?
3. stereo bluetooth headphones connect direct to gear but sound cuts out , very choppy , has anybody tried this?
Click to expand...
Click to collapse
Did you try to turn on "samsung gear" on "protected app"?
When it connected, can you access gear app store and install any gear app?
I'm thinking about switching from mediapad x2 to P8max because I got a blank app store issue. And I want to make sure P8 max do not have that problem first
Hi , I rooted my p8max and removed phone manager so has no security like that , connects when driving or screen on but when walking etc disconnects , Bluetooth streaming also cuts out , p8max streams music perfect to my LG tone BT phones .
---------- Post added at 11:09 AM ---------- Previous post was at 11:08 AM ----------
When I did not root phone , tried putting gear manager in protected apps , did not make a difference
I've just purchased P8 max and it work perfectly fine with my gear s2 classic. No problem at all! I'm running stock rom, not rooted
Sent from my HUAWEI P8max using Tapatalk
I have a LG V10 H961N when Gear S2 are disconected bluetooth and Lg V10 have screen off Gear S2 doesn´t conected again auto i must screen on to conected again. Any fix for this??
Have a 'sport' S2 and Xiaomi Redmi 3 Pro here.
Managed to install Samsung Gear app. Phone paired to watch over bluetooth just fine.
But when I launch Samsung Gear app and select my watch, it says Download Failed. Looks like some kind of incompatibility or lack of permissions. What do I do?
I got mate 8 (Chinese version) about a week ago and it's an amazing device but it has a major issue with receiving notifications!!! Having an amazing phone with such major issue is like having a BMW with Toyota engine!!! Has anyone find any solution to this issue?
abbody8002 said:
I got mate 8 (Chinese version) about a week ago and it's an amazing device but it has a major issue with receiving notifications!!! Having an amazing phone with such major issue is like having a BMW with Toyota engine!!! Has anyone find any solution to this issue?
Click to expand...
Click to collapse
Hi there. I got the same problem (chinese version) Try to allow Auto start, keep wlan and mobile data on during sleep, allow app to run on backround and change the power plan to performance and let us know if it worked for you. Mine didnt work tho
NikGi said:
Hi there. I got the same problem (chinese version) Try to allow Auto start, keep wlan and mobile data on during sleep, allow app to run on backround and change the power plan to performance and let us know if it worked for you. Mine didnt work tho
Click to expand...
Click to collapse
I already tried that with no luck
abbody8002 said:
I already tried that with no luck
Click to expand...
Click to collapse
Me neither. Hopefuly someone else have better solution or huawei will release an update
abbody8002 said:
I already tried that with no luck
Click to expand...
Click to collapse
Do you also have problem with the google maps? It cant determinate the location on wlan and netowrks. Only if i switch on the GPS.
NikGi said:
Do you also have problem with the google maps? It cant determinate the location on wlan and netowrks. Only if i switch on the GPS.
Click to expand...
Click to collapse
I just checked and apparently I have the same problem
Great!! Lol. Cant find any solution for this either
This is so upsetting
abbody8002 said:
This is so upsetting
Click to expand...
Click to collapse
Maybe need to wait till the international rom is out and flash it??
I have no other choice
abbody8002 said:
I have no other choice
Click to expand...
Click to collapse
Keep me posted if you find any solution pls. Tnx
What's your model number?
charlieb620 said:
What's your model number?
Click to expand...
Click to collapse
NXT-AL10
OK I'll go with the L29 than.
Hi at all in the general page of Huawei Mate 8 in this forum speak that the problem isn't the Mate 8 but new version of Android, and change same option solve this problem, try to see it
Update from the new firmware B137 for AL-10. It seems the push notifications for FB messenger, whatsapp are working better now but gmail and viber doesnt. You still need to open the viber app to get the messeges or turn on the screen to get the emails... Tested after restarting phone and left it on sleep mode without opening any of the apps. Battery mode set on perfomance. If set on smart doesnt work. But the problem comes back if you free up the memory.
The other problem with google map still remains. It cant determinate your possition on network and wlans (battery saving mode) only if you switch to gps (high accuaracy)
B137 Update
I just updated to the B137 update, and I was able to get notifications from viber, twitter but not from whatsapp or snapchat so therefore I decided to update whatsapp via the hi app as it had an update. I updated it and after was then not able to receive any notifications from viber or twitter either. I deleted the whatsapp and re installed it again from the one in play store and was able to get twitter and viber notifications back again which was strange but i am still unable to get notifications from whatsapp and snapchat. ive checked permissions and notification settings between the four apps and they are all the same.
Any help would be greatly appreciated!
---------- Post added at 07:51 PM ---------- Previous post was at 07:34 PM ----------
meallad said:
I just updated to the B137 update, and I was able to get notifications from viber, twitter but not from whatsapp or snapchat so therefore I decided to update whatsapp via the hi app as it had an update. I updated it and after was then not able to receive any notifications from viber or twitter either. I deleted the whatsapp and re installed it again from the one in play store and was able to get twitter and viber notifications back again which was strange but i am still unable to get notifications from whatsapp and snapchat. ive checked permissions and notification settings between the four apps and they are all the same.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
And now i get no notifications from any app until i open up the app; such a good phone but such a same it has such a huge bug :/
The L29 does not have notification issues.
Sucks that only the AL10 has this issue :/
charlieb620 said:
The L29 does not have notification issues.
Click to expand...
Click to collapse
says who?
Sent from my Nexus 5 using Tapatalk
Hi! i own a Dasaita PX6 and recently i have bought and connected an adapter OBDLink SX via USB for using app like Hybrid Assistant. Every time i switch on the car the Android system ask me if i want start the application. In the settings of this app there aren't any options to do not connect in automatic. So i'm here to ask some advices in some Android settings that do not show the pop up menu asking me everytime to connect and to start the app.
Thanks in advance
Does the SX work OK otherwise, the SX is a USB OBD adapter, right?
marchnz said:
Does the SX work OK otherwise, the SX is a USB OBD adapter, right?
Click to expand...
Click to collapse
Yes the OBDLink SX is working very good out of box (just choose the USB connection instead of Bluetooth). The only problem that Android is asking everytime the car is switch on if i want to open the Hybrid Assistant app. It's annoying
Suggest switching to HAL9K ROM and whitelist the app, preventing the app from being closed on sleep.
marchnz said:
Suggest switching to HAL9K ROM and whitelist the app, preventing the app from being closed on sleep.
Click to expand...
Click to collapse
the problem is the opposite: i don't want the app run everytime, i want to use the app only when i want to use it. when i chosen to close it i prefer that Android don't ask me everytime if i want to open it
Hello,
Did you find a solution for this annoying behaviour?
I want to connect a odblink sx to my px6 for Hybrid Assistant too. I won't buy the Odblink until I'm sure I can get rid of this behaviour. Thank you by advance for your feedback.
I already have a usb odblink scanner that show this popup on my Hal9k rom, I can make some tests if needed. (Unfortunately hybrid assistant can't connect to the car using my usb scanner).
---------- Post added at 05:09 PM ---------- Previous post was at 04:37 PM ----------
I found a workaround using automate to check the dialog box automatically.
https://forum.emteria.com/discussion/443/app-usb-permission
It seems to be the easiest way. I'll test this next week.
dafunky said:
Hello,
Did you find a solution for this annoying behaviour?
I want to connect a odblink sx to my px6 for Hybrid Assistant too. I won't buy the Odblink until I'm sure I can get rid of this behaviour. Thank you by advance for your feedback.
I already have a usb odblink scanner that show this popup on my Hal9k rom, I can make some tests if needed. (Unfortunately hybrid assistant can't connect to the car using my usb scanner).
---------- Post added at 05:09 PM ---------- Previous post was at 04:37 PM ----------
I found a workaround using automate to check the dialog box automatically.
https://forum.emteria.com/discussion/443/app-usb-permission
It seems to be the easiest way. I'll test this next week.
Click to expand...
Click to collapse
Hi dafunky, did you find the solution to avoid the annoying usb popup? If yes could you explain me in easy word how to do? i'm not good in android system. Thanks in advance
Sorry for the late answer. Using Hal9k I don't have this problem.
dafunky said:
Sorry for the late answer. Using Hal9k I don't have this problem.
Click to expand...
Click to collapse
update to whatever base firmware Hal used, and problem I would suggest be resolved.
dafunky said:
Sorry for the late answer. Using Hal9k I don't have this problem.
Click to expand...
Click to collapse
How did you do? I have Hal9K too but it's still have the banner pop-up every time I switch on the car.... what settings do you have?
I can't tell you exactly. During startup I have a tasker scenario that launches hybrid assistant, then back to home, then open ha again. This is a workaround because in my case, when ha starts it shows a message "please allow ha to access the usb device" .
If I go back to home screen then open ha 2 seconds after it finally connects to the sx. Then my tasker scenario brings back to home screen again.
dafunky said:
I can't tell you exactly. During startup I have a tasker scenario that launches hybrid assistant, then back to home, then open ha again. This is a workaround because in my case, when ha starts it shows a message "please allow ha to access the usb device" .
If I go back to home screen then open ha 2 seconds after it finally connects to the sx. Then my tasker scenario brings back to home screen again.
Click to expand...
Click to collapse
So are you still using TASKER app?
Yes I am
---------- Post added at 05:23 PM ---------- Previous post was at 05:18 PM ----------
I pre-load all my apps in one script : Spotify, HA, radar.
dafunky said:
I can't tell you exactly. During startup I have a tasker scenario that launches hybrid assistant, then back to home, then open ha again. This is a workaround because in my case, when ha starts it shows a message "please allow ha to access the usb device" .
If I go back to home screen then open ha 2 seconds after it finally connects to the sx. Then my tasker scenario brings back to home screen again.
Click to expand...
Click to collapse
Im very noob with tasker, can you share it please? Thanks!
Here you are
Dasaita Tasker - Pastebin.com
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
pastebin.com
dafunky said:
Here you are
Dasaita Tasker - Pastebin.com
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
pastebin.com
Click to expand...
Click to collapse
Thanks!!!
Hi, I have a Xiaomi 10 pro
just updated to MIUI12
ever since then my watch has a "watch" logo on top which means is not not connected to bluetooth.
I have reset the phone's network setting a couple of times.
the watch is also reset.
I have used the Galaxy Wearable to connect the watch. It detected the watch and seems connected (but under bluetooth menu it just saved the watch setting without indicated connected)
the it stuck at the "finishing pairing" page.
Whenever it asked me for permission i either allow it when the apps open or allow it all the time.
but it just stay in that finishing parining page over 20 minutes.
any body faced this problem after updated to MIUI 12?
I am still on Miui 11 but after last security update for June had loads of issues with constant disconnect and errors with Samsung Galaxy Active 2 watch.
Gonna get rid of this and get a Mi Band 5.
I know it's totally different device but not using all the functionality currently.
Sent from my Mi 10 Pro using Tapatalk
I want to stick to a watch instead of a sport band.
Anybody could hint me?
I have tried to connect the watch to an earbud, it works perfectly fine. quick pairing and working.
however it is just not the case with the phone.
again my phone is pairing perfectly with other devices too like my car, earbud, headset.
As i do workout quite often, all the data are store in the watch and not going to the phone. also it is not uploading to the database when it is already connected to WIFI.
I have the same problem, after MIUI 12 my galaxy gear s3 can't connect to the phone, bluetooth is trying to connect but connection failed.
Tried to factory reset phone and watch - nothing helps.
I have the global rom on my mi 10 pro. I was getting the watch not staying connected. I held down the Galaxy Wearable app, hit info, and turned on auto start, and I've been fine since. Oh, I am using Galaxy Active 1 though, not 2.
mixxxk said:
I have the global rom on my mi 10 pro. I was getting the watch not staying connected. I held down the Galaxy Wearable app, hit info, and turned on auto start, and I've been fine since. Oh, I am using Galaxy Active 1 though, not 2.
Click to expand...
Click to collapse
But it doesn't make sense when the bluetooth connection is not even staying conencted, there is not going to help with the app with auto restart. I have still gave it a try which didn't help much.
But Thank you for the input anyways.
i thought its only me but yes i have samsung watch active 2 after miui 12 update i cant connect my phone gives a pincode to connect to the watch but the watch isnt showing any pincode to pair.
xnostra said:
i thought its only me but yes i have samsung watch active 2 after miui 12 update i cant connect my phone gives a pincode to connect to the watch but the watch isnt showing any pincode to pair.
Click to expand...
Click to collapse
Hi, as you said there is no pincode popup, but can you see the device (in this case your active 2) when you open the bluetooth list from the PHONE?
rayraymond said:
Hi, as you said there is no pincode popup, but can you see the device (in this case your active 2) when you open the bluetooth list from the PHONE?
Click to expand...
Click to collapse
yes i can i tried alot of things but i guess miui 12 break the galaxy watch 2 active compatibility it was working perfect at miui 11
I don't have my watch with me, can someone check if disabling MIUI optimization helps with our problem.
https://c.mi.com/oc/thread-3251450-1-0.html?mobile=no
Disabling MIUI optimization SOLVES the issue!!!
Same with on MIUI 12 with Samsung Galaxy Watch - Got it working by putting on Developer Mode and turning off MIMUI optimization - works great but issues with WhatsApp - not reading the contact
vanaxe said:
Same with on MIUI 12 with Samsung Galaxy Watch - Got it working by putting on Developer Mode and turning off MIMUI optimization - works great but issues with WhatsApp - not reading the contact
Click to expand...
Click to collapse
Try clear WhatsApp App data, it will reset permissions and it should work again. You'll just have to backup and restore your whatsapp.
AlexDaizy said:
Try clear WhatsApp App data, it will reset permissions and it should work again. You'll just have to backup and restore your whatsapp.
Click to expand...
Click to collapse
Thank you, looks like it is work so far.
Also do you have a solution for the keyboard - when you reboot - it goes back to the default keyboard and not my preferred. Sugou Keyboard is therefore re-enabled as the default keyboard
Thanks again for your help
Brent
vanaxe said:
Thank you, looks like it is work so far.
Also do you have a solution for the keyboard - when you reboot - it goes back to the default keyboard and not my preferred. Sugou Keyboard is therefore re-enabled as the default keyboard
Thanks again for your help
Brent
Click to expand...
Click to collapse
Uninstall it https://forum.xda-developers.com/xiaomi-mi-10/how-to/guide-debloat-usable-chinese-rom-root-t4066909
Here is the link of apps you can uninstall
vanaxe said:
Same with on MIUI 12 with Samsung Galaxy Watch - Got it working by putting on Developer Mode and turning off MIMUI optimization - works great but issues with WhatsApp - not reading the contact
Click to expand...
Click to collapse
where did you find this option in developer mode, i cant find it. Are you on android 11 or....
marcel112 said:
where did you find this option in developer mode, i cant find it. Are you on android 11 or....
Click to expand...
Click to collapse
It's in developer option unless you are on eu which doesn't have it. I'm not sure about global rom
raven213 said:
It's in developer option unless you are on eu which doesn't have it. I'm not sure about global rom
Click to expand...
Click to collapse
i see thats why i cant find it, i'm on .eu:crying: