Related
I'm browsing the web in search of a S5 cover for my wife and I'm shocked to see how poor the choice actually is.
I'm searching for a Flip Cover (with or without the S-View function) in the style of the S4 which was fantastic as it was really slim, something that matters for her.
The official S5 covers look like crap : expensive, bulky, doesn't even close properly and you can't turn the flip part around the phone. It's like they were trying to make a book..:silly:
Even the generally good Spiegen/Ringke catalog is poor when it comes to flip covers (too bulky or they are wallet versions, which she's not into).
Any advice ?
I have s-view ant it fells awesome, no problems! In my opinion you should get s-view, or just place screen protector! s-view feel great in hands and it easy flips to the back of phone. Its not even bulky! Phone looks more amazing in it.
---------- Post added at 10:07 PM ---------- Previous post was at 10:05 PM ----------
But i should say one thing: s-view screen gets dirty too easy!
DannyBiker said:
I'm browsing the web in search of a S5 cover for my wife and I'm shocked to see how poor the choice actually is.
I'm searching for a Flip Cover (with or without the S-View function) in the style of the S4 which was fantastic as it was really slim, something that matters for her.
The official S5 covers look like crap : expensive, bulky, doesn't even close properly and you can't turn the flip part around the phone. It's like they were trying to make a book..:silly:
Even the generally good Spiegen/Ringke catalog is poor when it comes to flip covers (too bulky or they are wallet versions, which she's not into).
Any advice ?
Click to expand...
Click to collapse
Actually there is more than you think, you just need to know where to search for them, I do agree, the range is limited if you compare it to the note 3, not sure about the S4.
try searching samsung's home town.
I have the S view case also, and I really like it. No need to open it to do small things like open camera. I really like it.
I have one of the OE Samsung flip covers and really like it. I used to have problems with my phone's screen coming on in my pocket and this automatically keeps the display turned off.
DannyBiker said:
I'm browsing the web in search of a S5 cover for my wife and I'm shocked to see how poor the choice actually is.
I'm searching for a Flip Cover (with or without the S-View function) in the style of the S4 which was fantastic as it was really slim, something that matters for her.
The official S5 covers look like crap : expensive, bulky, doesn't even close properly and you can't turn the flip part around the phone. It's like they were trying to make a book..:silly:
Even the generally good Spiegen/Ringke catalog is poor when it comes to flip covers (too bulky or they are wallet versions, which she's not into).
Any advice ?
Click to expand...
Click to collapse
I don't think anyone knows how to read.
You can find some aftermarket ones on the web similar to the S4 but quality wise im not sure
I feel your pain it's one of the main reasons i have not upgraded from S4 to S5 i love how simple, skinny flap and ROUNDED the corners are on my S4 s view cover they Fu**ed up with the S5's case with being square edged and the stitching unnecessary. They need to make a S5 case exactly like the S4's (they can put the big window in) but use same materials f
ake leather isn't for everyone
I initially bought the S-view case for mine... Honestly I wasn't impressed. Very cheesy materials, and a lot of apps didn't know how to use the s-view functionality. Of course if you put a different ROM on the phone that isn't touchwiz based all that functionality goes out the window. I ended up ordering a Spigen SlimArmor case and never looked back.
Yes I agree with you. S5 fill covers are really disappointed and ugly.
oFillo said:
I don't think anyone knows how to read.
You can find some aftermarket ones on the web similar to the S4 but quality wise im not sure
I feel your pain it's one of the main reasons i have not upgraded from S4 to S5 i love how simple, skinny flap and ROUNDED the corners are on my S4 s view cover they Fu**ed up with the S5's case with being square edged and the stitching unnecessary. They need to make a S5 case exactly like the S4's (they can put the big window in) but use same materials f
ake leather isn't for everyone
Click to expand...
Click to collapse
i actually think the squared design of the S5 s-view case is an upgrade to the S4's. say if you drop the phone on the corners, the squared part will take impact first and save your phone more or less. i've had the S-view case for the S4 for some time, but switches between some tpu cases and the s-view. to each their own though, i feel the S5 s-view case is better in all perspectives compared to the last generation, the only gripe is that it's heavier and thicker.
oFillo said:
I don't think anyone knows how to read.
You can find some aftermarket ones on the web similar to the S4 but quality wise im not sure
I feel your pain it's one of the main reasons i have not upgraded from S4 to S5 i love how simple, skinny flap and ROUNDED the corners are on my S4 s view cover they Fu**ed up with the S5's case with being square edged and the stitching unnecessary. They need to make a S5 case exactly like the S4's (they can put the big window in) but use same materials f
ake leather isn't for everyone
Click to expand...
Click to collapse
The old design for the s4 has horrible!! It the same back piece with a flap on it and provided no protection at all. I literally dropped it once and shattered my screen. The new on is way better.
Sent from my HTC One_M8 using XDA Free mobile app
Naisaelee21 said:
The old design for the s4 has horrible!! It the same back piece with a flap on it and provided no protection at all. I literally dropped it once and shattered my screen. The new on is way better.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
It was not designed for drop protection.... It was a very slim and sleek (very non bulk adding) way of protecting your screen from scratches. My whole reason for not liking the S5's cover is because of snagging those corners on my pocket pulling my phone in and out of my pocket.
---------- Post added at 08:21 AM ---------- Previous post was at 08:16 AM ----------
MMakoto said:
i actually think the squared design of the S5 s-view case is an upgrade to the S4's. say if you drop the phone on the corners, the squared part will take impact first and save your phone more or less. i've had the S-view case for the S4 for some time, but switches between some tpu cases and the s-view. to each their own though, i feel the S5 s-view case is better in all perspectives compared to the last generation, the only gripe is that it's heavier and thicker.
Click to expand...
Click to collapse
My response to Naisaelee21 also applies to you. And yes it is a little thicker didn't bother me as much tho
post
---------- Post added at 03:06 PM ---------- Previous post was at 03:00 PM ----------
post2
post3
---------- Post added at 04:26 PM ---------- Previous post was at 04:07 PM ----------
post4
---------- Post added at 04:56 PM ---------- Previous post was at 04:26 PM ----------
post5
---------- Post added at 05:02 PM ---------- Previous post was at 04:56 PM ----------
post6
DannyBiker said:
I'm browsing the web in search of a S5 cover for my wife and I'm shocked to see how poor the choice actually is.
I'm searching for a Flip Cover (with or without the S-View function) in the style of the S4 which was fantastic as it was really slim, something that matters for her.
The official S5 covers look like crap : expensive, bulky, doesn't even close properly and you can't turn the flip part around the phone. It's like they were trying to make a book..:silly:
Even the generally good Spiegen/Ringke catalog is poor when it comes to flip covers (too bulky or they are wallet versions, which she's not into).
Any advice ?
Click to expand...
Click to collapse
I have the galaxy s-view case and it is not bulky to me at all . The fact that you take off the battery cover before attaching it to the s-view case keeps it really slim. I added the spigen magnet to it so the flip cover stays shut just in case i drop it . Normally i dont use any case with my phones cause it makes them either look like crap or just makes it too bulky . I dont know if its the s5 s-view you were talking about when you cant turn the flip part around the phone but thats not the case with the s-view . I got mine and its OEM on amazon for 8.99 used but it was perfect in condition . I would at least try to put the s-view on your phone in the store and see if you like it .
---------- Post added at 12:31 PM ---------- Previous post was at 12:28 PM ----------
FlatOutRU said:
I have s-view ant it fells awesome, no problems! In my opinion you should get s-view, or just place screen protector! s-view feel great in hands and it easy flips to the back of phone. Its not even bulky! Phone looks more amazing in it.
---------- Post added at 10:07 PM ---------- Previous post was at 10:05 PM ----------
But i should say one thing: s-view screen gets dirty too easy!
Click to expand...
Click to collapse
I agree the s-view is amazing . It keeps the phone slim and protects it great at the same time + it looks good too . I like that you can take pictures without opening it . I had someone take a picture of me with my GS4 and they dropped my phone and broke it . I dont have to worry about it with this
My issue with the S-View case is the elasticity of the cover. When you've had the case open for a while it doesn't fully close for some time; it does eventually but you end up having to put the phone face down or manually turn the screen off.
I do like the ability to view texts with the cover closed though but certainly will look into getting some magnet.
Hey guys and girls,
Just want to give you a heads up about a metal case i received in the mail today. Took a chance at ordering this case and did not expect much of it, untill now. The quality is really nice. Very snug and made og strong materials. Even the buttons are metal. No rattles no loose gaps or sliding phone inside. Just perfect.
As for the signal i see no loss so far.
Get it here:
Sorry, cant post link's. Search "Luxury-Luphie-2nd-Aviation" at aliexpress.com
Nice lookin!
---------- Post added at 11:31 AM ---------- Previous post was at 11:30 AM ----------
$18.42 each, Here's link: http://www.aliexpress.com/item/Luxu...er-case-for-Samsung-galaxy-s5/2000007644.html
thanks pal, how does it feel in the hands !? slippery yes ?
Looked interesting until I saw the back cover is replaced. Not interested in losing water/dust resistance.
Im really mad at this , my xperia z3 magnetic port loose after a use of 2 weeks with the charging dock , thats mean im loosing waterproof , any solid fix for that ? a glue or something ? sony doesnt respond for that kind of ''issues'' ... **** sony
Just today I started noticing issues on my magnetic connecter/port, and have started to look around. The only information I've found so far is about how Sony isn't really covering this in a manner we'd expect.
*Edit* I do see that several people seem to be gluing the port back in. Not sure if anyone has had more success with Sony or their Vendor. I may, myself, contact T-Mobile at least before I try anything myself.
Mine has been fixed under warranty by UK Sony.
Unfortunately, it came out second time as well.
The problem is the magtron x2. - DO NOT BUY THAT!
Apparently, I am looking for a glue to do the job for myself…
I could send the phone back but that would be the longest solution…
Sent from my D5803 using XDA Free mobile app
---------- Post added at 01:40 PM ---------- Previous post was at 01:39 PM ----------
Sent from my D5803 using XDA Free mobile app
Too strong magnet
the adhesive I've seen recommended is sikaflex 291, which is on amazon - it's a marine sealant apparently
just to add that the black magnetic connectors seem so much harder to find for the Z3 than the white ones, although a german retailer called handyersatzteilshop.de seems to have them, and they ship internationally
I think this could be good for the job. What do u think?
http://m.loctite.co.uk/en/product-overview/superglue/power-flex/power-flex-control.html
http://fs2.directupload.net/images/user/150215/5xude3mt.jpg
seems to tick a lot of boxes, although one or two others had temperature ranges included as part of the sales pitch - I've used that stuff before for general purposes to be honest, and it's quite fluid - when the connector falls out is there any indication as to how the original glue was applied by sony, and is there much risk of the replacement glue seeping into the rest of the phone?
sisqoboy said:
I think this could be good for the job. What do u think?
http://m.loctite.co.uk/en/product-overview/superglue/power-flex/power-flex-control.html
http://fs2.directupload.net/images/user/150215/5xude3mt.jpg
Click to expand...
Click to collapse
I'm not sure if it would but if it's liquid then it might be hard to cover all holes for water entry. I used a clay adhesive and though it was hard to apply because the area is small, it did a great job of sealing my magnetic port so that I can still have water proof on the device and the port is very strong now.
Sent from my SGP621 using XDA Free mobile app
Do you have a link to the stuff what you exactly used?
Sounds good to me.
Btw,
On Ebay there is a magnetic connector for 6pounds and I have been told that ir has the adhevies layer as well. So might better to buy that.
---------- Post added at 02:48 AM ---------- Previous post was at 02:46 AM ----------
Well, I see your points.
The original glue like a 1mm thin rubber layer on the connector…
sisqoboy said:
Do you have a link to the stuff what you exactly used?
Sounds good to me.
Btw,
On Ebay there is a magnetic connector for 6pounds and I have been told that ir has the adhevies layer as well. So might better to buy that.
---------- Post added at 02:48 AM ---------- Previous post was at 02:46 AM ----------
Well, I see your points.
The original glue like a 1mm thin rubber layer on the connector…
Click to expand...
Click to collapse
I bought one at local shop. Try googling BOSTIK ADHESIVES.
Sent from my SGP621 using XDA Free mobile app
Water proof Gorilla Epoxy works wonders, used it to fix the LCD to my LG G2 after a screen replacement, it has a 3200 psi rating.
http://www.gorillaglue.com/gorilla-epoxy
Are y'all yanking out the magnetic charger thing straight out? I usually just snap it off to the side so that I don't apply so much force to the charger port.
lvlonkey said:
Are y'all yanking out the magnetic charger thing straight out? I usually just snap it off to the side so that I don't apply so much force to the charger port.
Click to expand...
Click to collapse
That's what I have been doing, I'm very careful with this because I know that there will be an issue of this yet no matter how careful i was it just went loose
Sent from my SGP621 using XDA Free mobile app
Well if that is the case I'm a little more worried. I love the phone so far but a these little build quality things and the fact that I can't get root yet (6613) is really starting to add up.
lvlonkey said:
Well if that is the case I'm a little more worried. I love the phone so far but a these little build quality things and the fact that I can't get root yet (6613) is really starting to add up.
Click to expand...
Click to collapse
Is 6613 the tmobile one? Sorry to hear about not having root yet.
Sent from my SGP621 using XDA Free mobile app
Unfortunately it doesn't matter how careful u are… sooner or later it will loose…
---------- Post added at 01:24 PM ---------- Previous post was at 01:22 PM ----------
abhinav.tella said:
Water proof Gorilla Epoxy works wonders, used it to fix the LCD to my LG G2 after a screen replacement, it has a 3200 psi rating.
http://www.gorillaglue.com/gorilla-epoxy
Click to expand...
Click to collapse
Is that easy to apply. I mean the area is tiny and does it make it waterproof?
i just bought a new connector.
What should I use to clean the socket for the connector before I glue it?
sisqoboy said:
Unfortunately it doesn't matter how careful u are… sooner or later it will loose…
---------- Post added at 01:24 PM ---------- Previous post was at 01:22 PM ----------
Is that easy to apply. I mean the area is tiny and does it make it waterproof?
Click to expand...
Click to collapse
You have to mix the epoxy and apply, it's a bit thick and gooey but you can still easily get the required amount. I used a small metal tab to get my G2s LCD fixed in place, as you know the G2 has a tiny bezel, if I used too much it would have gone into the LCD layers, but I avoided that.
sisqoboy, did you manage to fit the replacement connector, and any tips?
I'm trying to attach a magnetic plate (for a vent mount) to the back of my honor 8, and this glass surface is like magic, nothing will stick to it! The double-sided tape that came with the plate held for about 5 seconds; hot-glue (my usual fool-proof solution) popped off instantly. Super-glue doesn't bond to the glass.
Has anyone found a reliable way to attach things to the back glass?
(Side note: Pretty as the glass case is, I would never buy buy a phone with it again. Too slippery and too fragile, I cracked the back glass within 2 days of getting the phone.)
Put it inside a case..... Not pretty but then again gluing something on the back isn't either.
Hampa_D said:
Put it inside a case..... Not pretty but then again gluing something on the back isn't either.
Click to expand...
Click to collapse
Lol. No doubt. Try Amazon. There are some great deals on good lookin cases.
---------- Post added at 03:26 PM ---------- Previous post was at 03:24 PM ----------
https://www.amazon.com/Huawei-Cell-Phone-Case-Honor/dp/B01K5FSAF6
---------- Post added at 03:26 PM ---------- Previous post was at 03:26 PM ----------
This is a nice one too.
https://www.amazon.com/Huawei-MicroP-Frosted-Shield-Compatible/dp/B01J9K2OLE
Tmobilefan906 said:
Lol. No doubt. Try Amazon. There are some great deals on good lookin cases.
---------- Post added at 03:26 PM ---------- Previous post was at 03:24 PM ----------
https://www.amazon.com/Huawei-Cell-Phone-Case-Honor/dp/B01K5FSAF6
---------- Post added at 03:26 PM ---------- Previous post was at 03:26 PM ----------
This is a nice one too.
https://www.amazon.com/Huawei-MicroP-Frosted-Shield-Compatible/dp/B01J9K2OLE
Click to expand...
Click to collapse
I did it with a simple black tpu case from AliExpress on my moto x style, a metal plate under the case and on a magnet vent holder in the car, worked great could barely notice the plate.
Florp said:
I'm trying to attach a magnetic plate (for a vent mount) to the back of my honor 8, and this glass surface is like magic, nothing will stick to it! The double-sided tape that came with the plate held for about 5 seconds; hot-glue (my usual fool-proof solution) popped off instantly. Super-glue doesn't bond to the glass.
Has anyone found a reliable way to attach things to the back glass?
(Side note: Pretty as the glass case is, I would never buy buy a phone with it again. Too slippery and too fragile, I cracked the back glass within 2 days of getting the phone.)
Click to expand...
Click to collapse
Silicon case and a slim magnet in the back.
But I wouldn't use magnets as it might mess up with the sensors. I´m just guessing here...
zinko_pt said:
Silicon case and a slim magnet in the back.
But I wouldn't use magnets as it might mess up with the sensors. I´m just guessing here...
Click to expand...
Click to collapse
The plate you put under the case is just metal and the magnet is on the holder you stick in the vent of your car. Sensors seems to work without any issues.
Hampa_D said:
The plate you put under the case is just metal and the magnet is on the holder you stick in the vent of your car. Sensors seems to work without any issues.
Click to expand...
Click to collapse
Anyway I'm not risking it. I know a few people who use magnets, but it's too much money to risk it.
Hampa_D said:
I did it with a simple black tpu case from AliExpress on my moto x style, a metal plate under the case and on a magnet vent holder in the car, worked great could barely notice the plate.
Click to expand...
Click to collapse
That's a nice and simple solution.
Won't the metal plate worsen your connectivity? That is why there are 'antenna lines' on many recent phones right?
miva2 said:
That's a nice and simple solution.
Won't the metal plate worsen your connectivity? That is why there are 'antenna lines' on many recent phones right?
Click to expand...
Click to collapse
It's not noticeable if there's any connection drop. At least from the people I know. Also it's only for car mount purposes.
miva2 said:
That's a nice and simple solution.
Won't the metal plate worsen your connectivity? That is why there are 'antenna lines' on many recent phones right?
Click to expand...
Click to collapse
No I have no issues at all it works, costs 2 bucks from AliExpress.
Hampa_D said:
No I have no issues at all it works, costs 2 bucks from AliExpress.
Click to expand...
Click to collapse
I personally would go for the clip ones with the windshield suck cups, but it comes down to personal preference.
I cracked my rear camera glass cover. Is it sold separately or do i need to replace the entire camera unit? Any recommendations for moto g3 or generic phone repair kit?
http://www.ebay.com/itm/OEM-MOTOROLA-MOTO-G-2015-3RD-GEN-XT1548-MID-FRAME-CAMERA-LENS-HOUSING-/131687092483 Use some heat to remove the new one from the frame and heat up yours while not getting glass on the sensor on yours. Or just use the whole new subframe.
does it affect the picture? if not, leave it alone.
rmendez011 said:
http://www.ebay.com/itm/OEM-MOTOROLA-MOTO-G-2015-3RD-GEN-XT1548-MID-FRAME-CAMERA-LENS-HOUSING-/131687092483 Use some heat to remove the new one from the frame and heat up yours while not getting glass on the sensor on yours. Or just use the whole new subframe.
Click to expand...
Click to collapse
crazy motorola. i have to buy the entire housing. there's a cheaper silver one. retarded design. Can i use a heat gun without taking the phone apart? I don't see how it's possible. I can't even pry the stupid accent off.
KrisM22 said:
does it affect the picture? if not, leave it alone.
Click to expand...
Click to collapse
no doesn't. but glass may break completely. the crack is worse than it looks.
guest_2011 said:
no doesn't. but glass may break completely. the crack is worse than it looks.
Click to expand...
Click to collapse
if glass breaks then replace it - don't touch it until it does. But buy the phone suggested above for the spare part.
Looking closely at it I would guess you would have to take everything apart to get at it. You can experiment with the replacement phone.
KrisM22 said:
if glass breaks then replace it - don't touch it until it does. But buy the phone suggested above for the spare part.
Looking closely at it I would guess you would have to take everything apart to get at it. You can experiment with the replacement phone.
Click to expand...
Click to collapse
i don't feel like experimenting. don't want to make things worse. thought i could just replace the glass like in all normal phones.
my bet is that the glass is a mm or 2 larger than the opening
KrisM22 said:
my bet is that the glass is a mm or 2 larger than the opening
Click to expand...
Click to collapse
doesn't look like it
Look at this
https://www.ifixit.com/Teardown/Motorola+Moto+G3+Teardown/56195
part way down they remove the camera. It looks like the glass is part of the camera - ie sealed when camera is made.
---------- Post added at 09:15 PM ---------- Previous post was at 09:13 PM ----------
I did remove the metal cover on mine - it is very hard - strong double-stick tape - do it slowly and gradually.
KrisM22 said:
Look at this
https://www.ifixit.com/Teardown/Motorola+Moto+G3+Teardown/56195
part way down they remove the camera. It looks like the glass is part of the camera - ie sealed when camera is made.
---------- Post added at 09:15 PM ---------- Previous post was at 09:13 PM ----------
I did remove the metal cover on mine - it is very hard - strong double-stick tape - do it slowly and gradually.
Click to expand...
Click to collapse
i scrolled to step 8/9 doesn't look like it's part of the camera. but thanks for the link i couldn't find this one
there's a few of these on fleabay. You'll probably need a cheap heat gun to get the screen off.http://www.ebay.com/itm/OEM-Motorol...443701?hash=item3f772e02b5:g:fKAAAOSwsW9YwHT3
KrisM22 said:
Look at this
https://www.ifixit.com/Teardown/Motorola+Moto+G3+Teardown/56195
part way down they remove the camera. It looks like the glass is part of the camera - ie sealed when camera is made.
---------- Post added at 09:15 PM ---------- Previous post was at 09:13 PM ----------
I did remove the metal cover on mine - it is very hard - strong double-stick tape - do it slowly and gradually.
Click to expand...
Click to collapse
what metal cover did you remove?
KrisM22 said:
there's a few of these on fleabay. You'll probably need a cheap heat gun to get the screen off.
Click to expand...
Click to collapse
looking at the pics seems like after step 2 i would try to pry the old glass cover and install the new, if i can pry it from the new housing in one piece without cracking.
guest_2011 said:
what metal cover did you remove?
Click to expand...
Click to collapse
step 2 in teardown.
---------- Post added at 09:23 PM ---------- Previous post was at 09:23 PM ----------
guest_2011 said:
looking at the pics seems like after step 2 i would try to pry the old glass cover and install the new, if i can pry it from the new housing in one piece without cracking.
Click to expand...
Click to collapse
My bet is you'd ruin it.
KrisM22 said:
step 2 in teardown.
Click to expand...
Click to collapse
is it metal/alloy? feels like plastic. how did you reattach it?
KrisM22 said:
step 2 in teardown.
---------- Post added at 09:23 PM ---------- Previous post was at 09:23 PM ----------
My bet is you'd ruin it.
Click to expand...
Click to collapse
yes it's definitely part of the housing. it's not part of the "accent" and not part of the camera.
guest_2011 said:
is it metal/alloy? feels like plastic. how did you reattach it?
Click to expand...
Click to collapse
yeah probably plastic. I was very careful when I removed it so just pressed it back on. My case would keep it from falling off if loose. Do not impart any bend to it or it won't lie flat.
---------- Post added at 09:32 PM ---------- Previous post was at 09:27 PM ----------
guest_2011 said:
yes it's definitely part of the housing. it's not part of the "accent" and not part of the camera.
Click to expand...
Click to collapse
It looks like there's one in the new camera already attached (link to ebay above)
KrisM22 said:
yeah probably plastic. I was very careful when I removed it so just pressed it back on. My case would keep it from falling off if loose. Do not impart any bend to it or it won't lie flat.
Click to expand...
Click to collapse
why did you remove yours?
no i'm wrong - it's a separate piece.
---------- Post added at 09:34 PM ---------- Previous post was at 09:33 PM ----------
guest_2011 said:
why did you remove yours?
Click to expand...
Click to collapse
curious. help you out.