For those of you who don't like how your phone feels, but do not want a cover, here is a wonderful solution. I bought a can of "plastic dip" online and sprayed my cover. It feels wonderful. Mine looks a bit inconsistent, but if you apply the right amount of coats yours could look better. It is also very thin and removable. All you have to loose is he cost of the rattle can.
lt4mula said:
For those of you who don't like how your phone feels, but do not want a cover, here is a wonderful solution. I bought a can of "plastic dip" online and sprayed my cover. It feels wonderful. Mine looks a bit inconsistent, but if you apply the right amount of coats yours could look better. It is also very thin and removable. All you have to loose is he cost of the rattle can.
Click to expand...
Click to collapse
Many people have tried it, but in the end, it will start peeling off within a day or two, especially since the phone is often take in and out of pockets, where the corners of the cover is stressed, the rubber will come off. And that was after 4-5 coats.
It does feel amazing though, I just wish it lasted longer than a couple of days.
Best off would be buying a cheap but non-glossy back cover, maybe one that imitates the S4's brushed aluminum style side.
I'm very interested in this. If anyone finds a non glossy battery cover, please let me know!!!
http://www.aliexpress.com/item/Deluxe-Chrome-Metal-wire-drawing-series-battery-back-cover-case-for-Samsung-galaxy-s4-i9500-free/865402025.html
These look interesting..
ilabs said:
http://www.aliexpress.com/item/Deluxe-Chrome-Metal-wire-drawing-series-battery-back-cover-case-for-Samsung-galaxy-s4-i9500-free/865402025.html
These look interesting..
Click to expand...
Click to collapse
There are plenty of those here in Hong Kong, unfortunately, those are also super slippery, and sometimes they don't even fit all that well. I wish they should just make a rubberized backing with the same grippy materials they make cases with... or I just wish plastidip would last longer...
Just get a full body skin from xtremeguard. I had one on my Note 2 and it eliminated the slippery issues.
http://www.ebay.com.sg/sch/i.html?_...nkw=galaxy+s4+battery+door&_sacat=0&_from=R40
http://www.ebay.com.sg/sch/i.html?LH_PrefLoc=2&_nkw=galaxy+s4+battery+cover
---------- Post added at 02:03 PM ---------- Previous post was at 02:01 PM ----------
ilabs said:
http://www.aliexpress.com/item/Deluxe-Chrome-Metal-wire-drawing-series-battery-back-cover-case-for-Samsung-galaxy-s4-i9500-free/865402025.html
These look interesting..
Click to expand...
Click to collapse
If you're interested in those metal covers, do take note that wireless charging does not work through those... in case you plan to install a wireless-charging coil behind it in future.
chiefroastbeef said:
Many people have tried it, but in the end, it will start peeling off within a day or two, especially since the phone is often take in and out of pockets, where the corners of the cover is stressed, the rubber will come off. And that was after 4-5 coats.
It does feel amazing though, I just wish it lasted longer than a couple of days.
Click to expand...
Click to collapse
When I first read your reply I thought, "no way, it is on there like it was meant to be." Then I pulled my phone out of my pocket and a corner of the coating picked up.
Oh well. My Spoogin... Spengin... Spfjdksal;jfd,(however it is spelled) hybrid case will be here tomorrow anyway.
lt4mula said:
When I first read your reply I thought, "no way, it is on there like it was meant to be." Then I pulled my phone out of my pocket and a corner of the coating picked up.
Oh well. My Spoogin... Spengin... Spfjdksal;jfd,(however it is spelled) hybrid case will be here tomorrow anyway.
Click to expand...
Click to collapse
Yea, it really really got my hopes up when I first sprayed it on, it looked and felt so good and solid.. but then a day later...
MasK said:
http://www.ebay.com.sg/sch/i.html?_...nkw=galaxy+s4+battery+door&_sacat=0&_from=R40
http://www.ebay.com.sg/sch/i.html?LH_PrefLoc=2&_nkw=galaxy+s4+battery+cover
---------- Post added at 02:03 PM ---------- Previous post was at 02:01 PM ----------
If you're interested in those metal covers, do take note that wireless charging does not work through those... in case you plan to install a wireless-charging coil behind it in future.
Click to expand...
Click to collapse
Yes, I'm aware of that issue. But wireless charging hasn't come up to my real-life usage expectations yet..
Hey guys and girls,
Just want to give you a heads up about a metal case i received in the mail today. Took a chance at ordering this case and did not expect much of it, untill now. The quality is really nice. Very snug and made og strong materials. Even the buttons are metal. No rattles no loose gaps or sliding phone inside. Just perfect.
As for the signal i see no loss so far.
Get it here:
Sorry, cant post link's. Search "Luxury-Luphie-2nd-Aviation" at aliexpress.com
Nice lookin!
---------- Post added at 11:31 AM ---------- Previous post was at 11:30 AM ----------
$18.42 each, Here's link: http://www.aliexpress.com/item/Luxu...er-case-for-Samsung-galaxy-s5/2000007644.html
thanks pal, how does it feel in the hands !? slippery yes ?
Looked interesting until I saw the back cover is replaced. Not interested in losing water/dust resistance.
I'd pay 40$ for a nice glass and metal back door if it didn't affect the phones profile at all. With a lot of people sticking with the note 4 I assume a lot of them would also be willing to spruce it up a bit. I've found one shady eBay seller with metal back doors but nothing else, it seems like an easy accessory to make that anyone who keeps their phone naked would like.
agree totally. I'd love a direct replacement. Not after carbon, but maybe just a different texture like the new moto x. Alternatively there are skins, but they are fragile.
I'm not upgrading (previously I've had every note model from pre order) so will stay with the 4 until something amazing is released. Was waiting for the LG G4 pro but if the v10 is what they release, I may avoid it. So customising my device would be good - with NFC!. I don't use a case so would appreciate anything offered - leather/wood/pattern etc. Quite liking the zenfone back!!!:silly:
http://www.casefanatic.com/samsung/...leather-motif-battery-replacement-cover-case/
Probably because of the Note 4 design, since top and bottom of it is not plain at all. It's a bit rounded and there's a little protuberance where the headphone jack is located. It's hard to imitate that design in a metal case (and impossible with glass). There're some metal back doors but most people who bought them are claiming that it doesn't fit very well in those areas indicated in the beginning of this reply.
This one is made of metal and tempered glass: http://www.aliexpress.com/item/Luxu...est=201526_4,201527_1_71_72_73_74_75,201409_2
Looks nice, but it's a bit too thick to me. There's the same model but instead of a case it actually replaces the battery cover (you have to take it off first to put the case on it) that fits perfectly in the phone and is much more thinner, but I can't find it atm.
Not sure how "nice" these are, but there are a few out there..
http://www.aliexpress.com/wholesale...20150919002705&SearchText=note+4+battery+door
---------- Post added at 04:29 AM ---------- Previous post was at 04:28 AM ----------
http://www.aliexpress.com/item/Free...est=201526_3,201527_4_71_72_73_74_75,201409_1
You will not find a glass battery door (back cover) because it needs to flex when you remove the cover. If it were glass it would shatter after several attempts. As for a metal battery door, it would kill reception.
There's hundreds of battery doors for the Note 4 on Amazon. There's brushed metal, wood, etc.
Looking for anyone who's been able to locate the official Samsung screen protector here in the US at a physical store (Best Buy, AT&T, etc) or a reputable online store.
Thanks!
Bump. I'm looking aswell.
Mobilefun.com
Sent from my SM-N930V using Tapatalk
moralesd66 said:
Mobilefun.com
Sent from my SM-N930V using Tapatalk
Click to expand...
Click to collapse
Not in stock
Yeah, it was a 5day wait until it was restocked when i bought it. Im still waiting.
Sent from my SM-N930V using Tapatalk
I'm amazed at the lack of official accessories for the launch.
Then again, look what happened to best buy/target.
I guess we will just have to wait...
I received mine. Haven't installed it yet. But it's in my grubby little hands. Mobilefun VERY early order.
Ok, installed.
Fits better than many of the aftermarket ones based on what I've seen for reviews. Sides are curved already, little cutouts at the corners so they don't pull up.
After several hours of bubblepushing, I've got it almost perfect. I also think letting it get nice and heated up on the wireless charger helped, tho one of the sides still has some bubbles and the curved screen makes it really tough to push them out. They get shoved around. I suspect all would have similar issues.
it feels less rubbery than say a Zagg, not as smooth as glass. The curves do NOT make it easier to install but if you take your time, and have plenty of patience, it should go fine.
Inside the box, you get 2 screen protectors, a 2 inch square microfiber cloth and some dust removal stickers. No cleaner, no instructions but the case had nice foam padding.... It does not state wet or dry install. I went with dry.
I scrapped the stickers and mf cloth and used real cleaner and a much bigger microfiber cloth. Also got my bathroom all steamy to clear dust particles because there's nothing more OCD than a big piece of lint under your screen.
Now, you're going to want to know if it'll work with cases. Here's the rub. I only have the official S-VIEW case and it seemed to be fine there, didn't push up the sides "YET".
I've had it out of the case for HOURS after the install and just put it in 10 minutes ago.
Samsung got the fit nearly perfect, not unexpected. It is their device.
It's NOT the cheapest one out there and it seems rather hard to find for now, but so far, I'm "ok" with it. Time will tell.
I'll post at a later date/time if the sides start pushing up or the remaining bubbles don't get worked out. I cannot test it with any other case as I almost always use the s-view one.
Compusmurf said:
Ok, installed.
Fits better than many of the aftermarket ones based on what I've seen for reviews. Sides are curved already, little cutouts at the corners so they don't pull up.
After several hours of bubblepushing, I've got it almost perfect. I also think letting it get nice and heated up on the wireless charger helped, tho one of the sides still has some bubbles and the curved screen makes it really tough to push them out. They get shoved around. I suspect all would have similar issues.
it feels less rubbery than say a Zagg, not as smooth as glass. The curves do NOT make it easier to install but if you take your time, and have plenty of patience, it should go fine.
Inside the box, you get 2 screen protectors, a 2 inch square microfiber cloth and some dust removal stickers. No cleaner, no instructions but the case had nice foam padding.... It does not state wet or dry install. I went with dry.
I scrapped the stickers and mf cloth and used real cleaner and a much bigger microfiber cloth. Also got my bathroom all steamy to clear dust particles because there's nothing more OCD than a big piece of lint under your screen.
Now, you're going to want to know if it'll work with cases. Here's the rub. I only have the official S-VIEW case and it seemed to be fine there, didn't push up the sides "YET".
I've had it out of the case for HOURS after the install and just put it in 10 minutes ago.
Samsung got the fit nearly perfect, not unexpected. It is their device.
It's NOT the cheapest one out there and it seems rather hard to find for now, but so far, I'm "ok" with it. Time will tell.
I'll post at a later date/time if the sides start pushing up or the remaining bubbles don't get worked out. I cannot test it with any other case as I almost always use the s-view one.
Click to expand...
Click to collapse
Im so jealous of you. I've got the Skinomi one and cant keep the edges down for the life of me!
Can't find them in Canada either, the official samsung stores don't have them at this time
HeavenlyFall said:
Can't find them in Canada either, the official samsung stores don't have them at this time
Click to expand...
Click to collapse
https://www.amazon.com/gp/product/B01JMLQSFI/ref=od_aui_detailpages00?ie=UTF8&psc=1
Amazon appears to be my best bet. I have one on order that will be delivered next week hopefully.
hotspace said:
https://www.amazon.com/gp/product/B01JMLQSFI/ref=od_aui_detailpages00?ie=UTF8&psc=1
Amazon appears to be my best bet. I have one on order that will be delivered next week hopefully.
Click to expand...
Click to collapse
"Buy Used" :')
I think you can get them for CA from the same website, from what I gather everything is shipped from the UK anyway.
Edit: Yup, found it: http://ca.mobilefun.com/official-samsung-galaxy-note-7-screen-protector-60374
Is there an orange-peel effect on this original Samsung screen protector? Since it's a bit rubbery like Zagg.
No orange peel effect, it's not like the original Zagg, more like the HD one. Feels like hard plastic and not glass tho.
followup notes.
Still attached to the sides fine. Have taken the phone in and out of the sview case several times now to put in the Gear VR. Not once has it pushed up the sides.
The remaining bubbles have worked their way out now. I switched tips on my spen as suggested and it feels fine.
I think it's a keeper. Plus they give you 2 so I have a spare for when/if I tear this one up.
What tip you did you switch too? I got my screen protector on the way.
bagged00 said:
What tip you did you switch too? I got my screen protector on the way.
Click to expand...
Click to collapse
The white one felt the best. YMMV.
Hmmm, I dunnooo.......
I have serious doubts about this being actual OEM. But if it works, HEY, why not (key takeaway)....been trying to get this since before release. If China can make Burberry bags that are identical to their "genuine" counterparts well then........
Anyway, if the ones from "Mobile Fun" really are OEM, I am curious to know how they got them, seeing as though Samsung themselves haven't started selling this item yet.
I think the design is ingenious, with the corner niches to allow for adherence to the beveled corners and curved sides.
---------- Post added at 03:13 AM ---------- Previous post was at 03:11 AM ----------
I should add that I'm using an IQ Shield. First one was total garbage, they sent a replacement, just applied the replacement they sent me (looks like it might be a winner, though it's curing now so will update with results.
Requires extreme patience, minimal spray and a hairdryer but it IS possible. Sorry to take off track.
Waiting for OEM SP's to be made available in the States.
---------- Post added at 03:14 AM ---------- Previous post was at 03:13 AM ----------
Compusmurf said:
The white one felt the best. YMMV.
Click to expand...
Click to collapse
Is there any difference between the tips? i.e. white is softer, or vice versa??
Android1126 said:
I have serious doubts about this being actual OEM. But if it works, HEY, why not (key takeaway)....been trying to get this since before release. If China can make Burberry bags that are identical to their "genuine" counterparts well then........
Anyway, if the ones from "Mobile Fun" really are OEM, I am curious to know how they got them, seeing as though Samsung themselves haven't started selling this item yet.
I think the design is ingenious, with the corner niches to allow for adherence to the beveled corners and curved sides.
---------- Post added at 03:13 AM ---------- Previous post was at 03:11 AM ----------
I should add that I'm using an IQ SHield. First one was total garbage, they sent a replacement, just applied the replacement they sent me (looks like it might be a winner, though it's curing now so will update with results.
Requires extreme patience, minimal spray and a hairdryer but it IS possible. Sorry to take off track.
Waiting for OEM SP's to be made available in the States.
---------- Post added at 03:14 AM ---------- Previous post was at 03:13 AM ----------
Is there any difference between the tips? i.e. white is softer, or vice versa??
Click to expand...
Click to collapse
UPDATE* Second IQ Shield is better, and let me tell you, I followed the instruction video, and card perfectly, BUT, the edges are starting to lift again.
Ordered the (as advertised) OEM Screen Protector from MobileFun.com ... So this will have to do for now, until the Samsung one comes in.
And lastly, I see everyone blaming the manufacturers of screen protectors, they are all garbage, because it's near impossible getting the curved edges and beveled corners to stay down, even with a wet install.
The Note 7 has a sharp curve, as opposed to a slight arch (like on previous Samsung curved screens), hence it is that much harder to keep down.
Android1126 said:
I have serious doubts about this being actual OEM. But if it works, HEY, why not (key takeaway)....been trying to get this since before release. If China can make Burberry bags that are identical to their "genuine" counterparts well then........
Anyway, if the ones from "Mobile Fun" really are OEM, I am curious to know how they got them, seeing as though Samsung themselves haven't started selling this item yet.
I think the design is ingenious, with the corner niches to allow for adherence to the beveled corners and curved sides.
---------- Post added at 03:13 AM ---------- Previous post was at 03:11 AM ----------
I should add that I'm using an IQ SHield. First one was total garbage, they sent a replacement, just applied the replacement they sent me (looks like it might be a winner, though it's curing now so will update with results.
Requires extreme patience, minimal spray and a hairdryer but it IS possible. Sorry to take off track.
Waiting for OEM SP's to be made available in the States.
---------- Post added at 03:14 AM ---------- Previous post was at 03:13 AM ----------
Is there any difference between the tips? i.e. white is softer, or vice versa??
Click to expand...
Click to collapse
I'm using the OEM screen protector and clear view cover. Both are working well together
Sent from my SM-N930F using XDA Free mobile app
Android1126 said:
UPDATE* Second IQ Shield is better, and let me tell you, I followed the instruction video, and card perfectly, BUT, the edges are starting to lift again.
Ordered the (as advertised) OEM Screen Protector from MobileFun.com ... So this will have to for now, until the Samsung one comes in.
And lastly, I see everyone blaming the manufacturers of screen protectors, they are all garbage, because it's near impossible getting the curved edges and beveled corners to stay down, even with a wet install.
The Note 7 has a sharp curve, as opposed to a slight arch (like on previous Samsung curved screens), hence it is that much harder to keep down.
Click to expand...
Click to collapse
So I am the second version. Should into try it? In have the first version and it works really well. Just have some of the edges raising. Is the updated version smaller?
Sent from my Galaxy Note7 using XDA Labs
Ok let's start out by saying I work as a mechanic so my phone get put through hell from being dropped regularly to bring splashed with oil and greese and some brake cleaner from time to time... So far this case has held up to all of it...
Pros:
*Case is light weight for the most part
*Wireless charging works flawlessly unlike other cases I've used
*The sound port to make speakers front firing is amazing great sound
*Great protection for the phone
*Magnetic phone mounts work great as well (if you position the plate correctly you can keep wireless charging as well)
Cons:
*Can be difficult to install the first time but after that no issues at all
The cases feels great in the hands and fits the pixel 4 xl perfectly... The lip to protect the screen isnt to bad I personally thought it would bug me
but its not to noticable.... I would recommend this case to anyone looking to get a case for there pixel...
Too bulky for my taste, makes the phone look like you're carrying a brick. Much better cases out there for example the below.
https://www.amazon.com/dp/B07XLNB6RN/ref=cm_sw_r_other_apa_i_98P2Db0MFFX98
I think this will offer equal protection in a thiner profile.
I went with a trusted brand that I always use and have never had damage from a drop with any phone I have put into their case : https://www.tech21.com/en_us/protection/google/pixel-4-xl
---------- Post added at 09:47 AM ---------- Previous post was at 09:43 AM ----------
wolfu11 said:
I went with a trusted brand that I always use and have never had damage from a drop with any phone I have put into their case : https://www.tech21.com/en_us/protection/google/pixel-4-xl
Click to expand...
Click to collapse
Plus this is the likethe 3rd or 4th thread for the same damn case. I know they're giving them away for "free" but jeez.... Enough already.
---------- Post added at 10:09 AM ---------- Previous post was at 09:47 AM ----------
wolfu11 said:
I went with a trusted brand that I always use and have never had damage from a drop with any phone I have put into their case : https://www.tech21.com/en_us/protection/google/pixel-4-xl
---------- Post added at 09:47 AM ---------- Previous post was at 09:43 AM ----------
Plus this is the like 4th thread for the same damn case. I know they're giving them away for "free" but jeez.... Enough already.
Click to expand...
Click to collapse
https://forum.xda-developers.com/pixel-4-xl/accessories/lovin-aluminum-case-piexl-4-xl-t4000721
https://forum.xda-developers.com/pixel-4-xl/accessories/case-redirecting-speaker-t3985575
https://forum.xda-developers.com/pixel-4-xl/accessories/review-metal-saviour-case-pixel-4xl-t3996939
https://forum.xda-developers.com/pixel-4-xl/accessories/review-metal-saviour-case-pixel-4xl-t3996939
Is this case compatible with glass screen protector?