I have noticed this bug on my Atom with O2 Plus and need confirmation from other users before I try to feedback to their support.
I have found that my Atom intermittently does not sound Notifications and Alarms. Couldn't figure why for awhile then I discovered this workaround :
1.
Using O2 Plus, switch profile to Silent. You will notice speaker icon on the top bar shows muted.
2.
Switch profile back to Normal. The icon at the top bar now shows the speaker as ON (but actually notifications and remoinders will now fail i.e. not sounding)
3.
Go to Settings / Sounds & Notifications / Notifications
On the Event drop down, select reminders
4.
You will see your notification alarm sound with a "test play" button.
Hit the test play button a couple of times, then wait a few seconds.
5.
You will mysteriously see the speaker status in the top bar change to MUTE !!! Click on it, turn speaker back on, close all the windows. Your notifications will now sound correctly at the appointed alarms and calendar times.
It seems the O2 Plus profile when switching back from silent to normal does not do a full job in turning on the notification sounds, just system sound or something like that.
If you carry out this procedure everytime you switch your profile you will no longer have missing / silent notifications !
Can other users confirm this bug / phenomenon ?
Anyone able to write a simple proggy or script to do the above procedure automatically ?
Haven't noticed it before, and I haven't missed any notifications, but you're right.
yeah i noticed this!!!THANKS FOR THE FIX!
just to add.besides notifications, you also lose screen taps when switching from different profiles.this apparently is not fixed by your solution.
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
jimmynotch said:
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
Click to expand...
Click to collapse
What format is the ring tone in?
My ringtone is the 'Oldphone2' and it is set at'vibrate and ring'. It just spontaneously started this non-ringing thing this morning prompted by no changing of settings. As I said, I tried messing around with the setting after it stopped ringing, but to no avail. And the frustrating thing is that everything else seems to work fine. Argh!
This may seem silly, but have you checked your ring volume? I've had a situation a few times, for no apparent reason after disconnecting from Activesync, where my ring volume was down to 0. Just a thought.
I HAVE SAME PROBLEM, when you turn all to vibrate only and turn it back up . the ring stop working
Yes. all volume settings are up. ringer volume, call volume, media player volume.... Any other suggestions?
i had the same problem just now.. but changing the ringtone back to the ATT default one fixed it. I also use S2U2 and changing the setting for "vibrate when answered" or something like that seems to have fixed it as well.
Hope that helps.
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
jimmynotch said:
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=412418
this happened to me too and i hard resetted. that fixed it , then it started again. come to find out th eproblem was when i hit the volume key on the side i turned system valume up and didnt click on ringer volume to turn it up . i had to smack myself
do texts ringer still work?? if so then im pretty sure you have the same problem i had, check it. good luck though
Do you have the unit face down? It has an auto mute when face down.
I also have an alarm problem, although lights go off, the alarm doesn't ring. I also have problems with ringing on incoming calls. The speaker otherwise works fine. Volumes are turned on appropriately. I have Natfv4.0 installed. Do any of the roms fix this problem?
So somehow the problem fixed itself. Dont know how as I didnt even touch my phone for two days. I just turned it on and -BOOM- it rang a few minutes later. Totally spontaneous issue. Really strange this phone is sometimes...
Boy, do I feel dumb.....Never even noted the un hi-lighted RING volume TAB...
I guess I can't use THAT excuse for not answering calls...
Thanks
Ron
I've been having the same problem. It's very baffling to say the least. I believe it was caused by the newer versions of S2U2. Don't know if it's been discussed in that thread or not. Both times this ringer 'glitch' has occurred, it's been when I've password protected S2U2 in settings. The issue was fixed by turning the password protection off, restarting S2U2, soft resetting my Fuze.
I am having the same problem with incoming calls not playing the ring tone and missing calls. I can guarantee you that the system/ring volume controls are at maximum. I have switched ring tones to no avail. It seems to have something to do with changing the ring type from ring to increasing ring and or visa versa. When I change ring type the problem exists. If I turn system/ring volume to silent and then back to maximum it plays the ring tone just fine. There is a bug in there somewhere! I also see a 'send text' lower left of screen and I hear a blurp sound or two in the background wihile the ringtone is playing when the phone is ringing. Anyone else have any issues like this? If so or you have a fix please send it to [email protected] I'm new to this forum stuff and don't really know how to use it. Hope I didn't break any rules.
Thank you,
Trent Alexander
I just have the callers complaining that I take too long to answer the phone. I called myself, and it took 3 1/2 rings for my Fuze to ring...anyone else?
Great PPC, Lousy Phone
Mine too. I just tried it and it does not ring until seven seconds after the light starts flashing. Not only that, it will not retain a custom ring tone. I try to use Old Phone 2 but it reverts to the default on its own.
My vario iv also suffers from the missing ring tone- reboots sometimes help but not always.
I too have had to learn not to rely on the alarm- goes off some days and then not on others.
Just now I thought that I would try to play an mp3 to see if that works- I pressed play and then waited for the track to start- no sound- seconds later the screen changed and touchflow launched itself (again) went back to the home tab and the sound is back?????
Same problem... it stopped ringing...
one thing I notice is that if the number calling is private or block it will only light up (no ring) but from a caller with Caller ID open the phone will ring...
strange...
I posted this on the Verizon forums and it was suggested that I also post here looking for an answer so here it goes.
My phone will randomly turn sound off. According to all sound profiles my sound is on and it should make noise when ringing or text messages come in. The problem is that the sounds will randomly turn off but not necessarily all of them. I may receive text notifications and not rings or vice versa or I may not receive either. Then randomly they will come back and I will receive all the sound notifications.
I recently had my phone replaced and once I got the new one it began doing the same thing. I just can't believe that it is a coincidence that I would get two phones (both brand new) that would do the same thing. In an effort to fix it I updated my firmware on my old phone and everything but did not help.
I love this phone and I don't want to get rid of it and I don't want to go back to the Verizon store if there is a fix for it.
Thanks in advance for any advice you may have.
Hi,
I also have an Omnia II. And I do not have those issues. But what I do know is that there is an option that if you flip your phone (with the screen facing ground) the sound will shut off if someone is calling. Like if you are in a meeting and someone is calling, you just turn your phone and the sounds is then silenced.
You can find these this setting in Start>Settings>Basic settings>Motion setting
(could be other names as I use a Dutch windows)
IannEefje said:
Hi,
I also have an Omnia II. And I do not have those issues. But what I do know is that there is an option that if you flip your phone (with the screen facing ground) the sound will shut off if someone is calling. Like if you are in a meeting and someone is calling, you just turn your phone and the sounds is then silenced.
You can find these this setting in Start>Settings>Basic settings>Motion setting
(could be other names as I use a Dutch windows)
Click to expand...
Click to collapse
This is the most likely problem. They set it up so that, even if the phone is tiled just slightly downward, the sound will be turned off. They really should have made it a more direct-downward position. If you turn that off and still have problems then check to make sure you're not activating a silent mode with the volume-down rocker on the side of the phone. Holding the rocker down for a few seconds will put the phone into either vibrate or silent. Hope you get it figured out!
Hi there,
new HTC Sensaton arrived today - and I have problem with it. It vibrates very loud - it's even uncomfortable to use it in quiet places (vibrations when using buttons). When the back cover is off it's fine - it's perfectly quiet. When it's on - some part of back cover just vibrates, or something between the body and back cover cracks. I did some tests with foam tape inside - sometimes helps, sometimes not, also it's not what you want to do with a new phone.
Anybody else expecting this problem ? Is replacement the only solution ?
Thanks!
empeg said:
it's even uncomfortable to use it in quiet places (vibrations when using buttons).
Click to expand...
Click to collapse
I don't have the Sensation yet, but you should be able to deactivate the haptic feedback without problems - just go to Settings -> Sound and disable "Haptic feedback". This won't affect incoming call or messaging vibrations, only the very annoying touch vibrations most Android phones come preconfigured with. If there are still other places that show haptic feedback, special settings in that specific application are typically to blame (like call dialer-feedback which has its own preference panel on most phones; keyboard vibration on some keypads which can be disabled under Settings -> Language & Keyboard).
PartyMango said:
I don't have the Sensation yet, but you should be able to deactivate the haptic feedback without problems - just go to Settings -> Sound and disable "Haptic feedback". This won't affect incoming call or messaging vibrations, only the very annoying touch vibrations most Android phones come preconfigured with. If there are still other places that show haptic feedback, special settings in that specific application are typically to blame (like call dialer-feedback which has its own preference panel on most phones; keyboard vibration on some keypads which can be disabled under Settings -> Language & Keyboard).
Click to expand...
Click to collapse
I know that - but I do like vibrate feedback of touch operations. I use it now in Desire HD, and I want to keep it. Also I don't expect it to be a problem with every Sensation. I just hope that someone got same problem and managed to fix the hardware - using hammer or something like that.
Hi, when I receive a call, I heard the guy very well but he hear me like I'm far from my phone whereas I am next to it, any idea pls?
In sound and notifications setting there is accessory setting that have mic sensitivity, did you change that? It is auto by default without any problem.
Yes but it has no effect
Had the same issue last week, a reboot fixed the problem