I don't know what's the problem and i can't use any of the card readers to read my micro sd Card 64GB (exFat).
but other devices like USB hub with attached USB Thumb drive can be read. not to mention KBs Mouse... they all work
I have the same exact. I can't copy files from my camera to the phone. Works ok with a mouse. Even with the mi a3 i had before, i could do this. But the mi9tpro won't
HID over USB is enabled, but there's no USB Host support. That's why mouse/keyboard work, but not memory sticks and USB readers. MTP and WiFi transfers are the only way to go. It's a common issue nowadays on newer Android/phones. We just have to live with it.
regxh said:
I don't know what's the problem and i can't use any of the card readers to read my micro sd Card 64GB (exFat).
but other devices like USB hub with attached USB Thumb drive can be read. not to mention KBs Mouse... they all work
Click to expand...
Click to collapse
I think I didn't understand well the problem ?
You cannot read microSD card putted in a reader attached to the type c?
death_jax said:
I think I didn't understand well the problem ?
You cannot read microSD card putted in a reader attached to the type c?
Click to expand...
Click to collapse
Don't understand also, bcs i using micro sd to usb reader connected to phone via usbt type-c adapter and working great.
Dadovvv said:
Don't understand also, bcs i using micro sd to usb reader connected to phone via usbt type-c adapter and working great.
Click to expand...
Click to collapse
Me too, I bought and use this:
https://www.amazon.it/dp/B07416LQVM/ref=cm_sw_r_other_apa_i_QDLWEbKT3QY9N
Works well with scheduled backups of Titanium Backup, in fact I putted its folder in microSD.
Inviato dal mio Mi 9T Pro utilizzando Tapatalk
death_jax said:
Me too, I bought and use this:
https://www.amazon.it/dp/B07416LQVM/ref=cm_sw_r_other_apa_i_QDLWEbKT3QY9N
Works well with scheduled backups of Titanium Backup, in fact I putted its folder in microSD.
Inviato dal mio Mi 9T Pro utilizzando Tapatalk
Click to expand...
Click to collapse
im using this + usb to usb type-c adapter
Related
Can anyone recommend a USB SDHC card reader that I can mount on my CM9 touchpad?
I've got the USB Y cable and can see the contents of USB sticks in Astro file manager, also managed to view the pictures on the memory card in my Olympus SLR camera. Unfortunately my other camera Canon compact camera doesn't support mass storage mode, so i want a SDHC USB card reader that i can plug into my touchpad to view the pictures on the memory card.
I've tried a couple of SDHC USB dongles and haven't been able to get them to work, i plug them in and nothing happens, no blinkning LEDs, no files showing in Astro.
So has anyone got this to work, if so can you post a link to the card reader you use?
Thanks!
obo789 said:
Can anyone recommend a USB SDHC card reader that I can mount on my CM9 touchpad?
I've got the USB Y cable and can see the contents of USB sticks in Astro file manager, also managed to view the pictures on the memory card in my Olympus SLR camera. Unfortunately my other camera Canon compact camera doesn't support mass storage mode, so i want a SDHC USB card reader that i can plug into my touchpad to view the pictures on the memory card.
I've tried a couple of SDHC USB dongles and haven't been able to get them to work, i plug them in and nothing happens, no blinkning LEDs, no files showing in Astro.
So has anyone got this to work, if so can you post a link to the card reader you use?
Thanks!
Click to expand...
Click to collapse
Make sure you're file manager is set to show all/hidden files.
I use tiny Dane elec readers but any should work.
Make sure they are fat 32 format.
Does USB OTG work on cm9?
I can't get it to work with my nexus OTG adapter?
Thanks and sorry to hijack
Sent from my Galaxy Nexus using Tapatalk
jameslfc5 said:
Does USB OTG work on cm9?
I can't get it to work with my nexus OTG adapter?
Thanks and sorry to hijack
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Yes it works
You need correct y and OTG cable and appropriate power source.
I managed to get astro to show the files on an USB Key, but when plugging 2 diff Card readers, and an SD card (fat32), although one of the adapters shows a led, USB storage remains empty under Astro...
any ideas?
tx
I took a punt and bought another SD card reader from amazon and it worked!
In case anyone else is looking for the same thing it's called "Daffodil UCR03 Ultra Slim all-in-1 USB 2.0 Memory Card Reader" on amazon.co.uk. This reads my 8GB SDHC card fine. Cost me about £3.50.
Can't include a link as forum won't let me cos i'm a newbie.
Would this work with WebOS too? And does this need external power source such as a USB hub?
I'm a total noob at this and could use a for-dummies version of how to connect a USB SDHC card reader to the Touchpad (I only recently flashed CM9).
Specifically, I would appreciate if someone could point me towards the exact products I would need in order to set up a USB card reader for my TP. I assume that I will need (1) a USB card reader (such as the Daffodil product mentioned by obo789) and (2) a micro USB adapter of some sort so that I can connect the USB card reader to the TP (is this the "OTG Cable" mentioned)?
If so, is there a particular USB card reader and cable that people recommend?
Once I've obtained the necessary products, would I just D/L Astro File Manager from the App store? Would EZ File Manager also work?
Sorry for the noob questions. I searched this and other forums but could not find a definite answer.
All the details on how to connect are here - http://forum.xda-developers.com/showthread.php?t=1582771&highlight=otg
It just needed a 5 second search.
Thank you so much for the link. I kept searching for USB card readers and nothing came up (here and on other online forums). I didn't t think to search for USB OTG compatibility since, until last night, I had no idea what USB OTG meant.
Thank you again for your help and for pointing me in the right direction.
The two I got working were both double capped style, one cap for the SD card and another for the USB plug. One is branded Dane Elec IIRC and the other was a free promo item from Panasonic I got a while ago.
Anyone know where I can get a y cable in the UK?I've tried all sorts of searches on amazon.co.UK and eBay, annoyingly the ones linked from amazon.com won't ship to the UK
Sent from my cm_tenderloin using Tapatalk 2
4-in-1 OTG adapter may save cables.
obo789 said:
Can anyone recommend a USB SDHC card reader that I can mount on my CM9 touchpad?
I've got the USB Y cable and can see the contents of USB sticks in Astro file manager, also managed to view the pictures on the memory card in my Olympus SLR camera. Unfortunately my other camera Canon compact camera doesn't support mass storage mode, so i want a SDHC USB card reader that i can plug into my touchpad to view the pictures on the memory card.
I've tried a couple of SDHC USB dongles and haven't been able to get them to work, i plug them in and nothing happens, no blinkning LEDs, no files showing in Astro.
So has anyone got this to work, if so can you post a link to the card reader you use?
Thanks!
Click to expand...
Click to collapse
Hardware is one thing, I just purchased one of these 4-in-1 adapters linked in this thread: http://forum.xda-developers.com/showpost.php?p=31034220&postcount=35
But your issue may be software/OS related, also discussed in that thread: http://forum.xda-developers.com/showpost.php?p=30952816&postcount=34
or better yet: http://rootzwiki.com/topic/33033-otg-usb-insufficient-available-bus-toolthingy/#entry921673
IMHO: you need the USB unmout utility presented there. Try it if your USB flash drives ot USB SD card readers don't work. You might just have a "insufficeint bus power" response, which the utility can correct. I can now read all my camera & camcorder SD cards from a USB interface that failed prior.
obo789 said:
Can anyone recommend a USB SDHC card reader that I can mount on my CM9 touchpad?
I've got the USB Y cable and can see the contents of USB sticks in Astro file manager, also managed to view the pictures on the memory card in my Olympus SLR camera. Unfortunately my other camera Canon compact camera doesn't support mass storage mode, so i want a SDHC USB card reader that i can plug into my touchpad to view the pictures on the memory card.
I've tried a couple of SDHC USB dongles and haven't been able to get them to work, i plug them in and nothing happens, no blinkning LEDs, no files showing in Astro.
So has anyone got this to work, if so can you post a link to the card reader you use?
Thanks!
Click to expand...
Click to collapse
I'm planning to use: http://www.amazon.com/Samsung-Note-...ction-Kit/dp/B006MJZOMW/ref=pd_ecc_rvi_cart_2
In theory you can use your HP charger connected to it as power source.
sheedatali said:
Would this work with WebOS too? And does this need external power source such as a USB hub?
Click to expand...
Click to collapse
webOS needs some preware.
JOLiu said:
I'm a total noob at this and could use a for-dummies version of how to connect a USB SDHC card reader to the Touchpad (I only recently flashed CM9).
Specifically, I would appreciate if someone could point me towards the exact products I would need in order to set up a USB card reader for my TP. I assume that I will need (1) a USB card reader (such as the Daffodil product mentioned by obo789) and (2) a micro USB adapter of some sort so that I can connect the USB card reader to the TP (is this the "OTG Cable" mentioned)?
If so, is there a particular USB card reader and cable that people recommend?
Once I've obtained the necessary products, would I just D/L Astro File Manager from the App store? Would EZ File Manager also work?
Sorry for the noob questions. I searched this and other forums but could not find a definite answer.
Click to expand...
Click to collapse
I've never used EZ File Manager? ES FileExplorer is fine.
I needed this app too: http://rootzwiki.com/topic/33033-otg-usb-insufficient-available-bus-toolthingy/#entry921473
Nathanation said:
Anyone know where I can get a y cable in the UK?I've tried all sorts of searches on amazon.co.UK and eBay, annoyingly the ones linked from amazon.com won't ship to the UK
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Sorry cant post a link cos I'm still new
The one i bought off amazon is now out of stock but i found another, search for "dual input usb cable" bit pricey but looks like it should work...?
Good luck!
Micro USB OTG w/ power
Nathanation said:
Anyone know where I can get a y cable in the UK?I've tried all sorts of searches on amazon.co.UK and eBay, annoyingly the ones linked from amazon.com won't ship to the UK
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Perhaps this? The Chinese don't care where they ship to:
http://www.ebay.com/itm/130740524313?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
ZedZardoz said:
Perhaps this? The Chinese don't care where they ship to:
http://www.ebay.com/itm/130740524313?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Click to expand...
Click to collapse
That should work and would have a lot less cable clutter than the original set up. With that all you would need is any microUSB charger to power it. There is also one for sale that has a male USB connection for power instead of a female micro USB. With this it would be easier to hook to one of those portable USB chargers that use a full size USB port.
http://www.ebay.com/itm/Micro-USB-H...i9100-S3-i9300-i9220-i9250-XOOM-/140825132367
Thanks for the links, i was searching the wrong terms completely lol
Im hoping to use my otg stuff to read my canon 550d sd card and ive found and an app called DSLR controller which will hopefully let me use my touchpad as a remote viewer for my camera, i'll post a pic of my serup when everything arrives
Sent from my HTC EVO 3D X515m using Tapatalk 2
Response and Results
ZedZardoz said:
Perhaps this? http://www.ebay.com/itm/130740524313?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Click to expand...
Click to collapse
This one would be used with the stock HP charger (to micro-female):good:
spunker88 said:
That should work and would have a lot less cable clutter than the original set up.
There is also one for sale that has a male USB connection for power instead of a female micro USB. With this it would be easier to hook to one of those portable USB chargers that use a full size USB port.
http://www.ebay.com/itm/Micro-USB-H...i9100-S3-i9300-i9220-i9250-XOOM-/140825132367
Click to expand...
Click to collapse
:good:
This one is best, as you say, for portable supplies with Std USB such as this one listed here :http://forum.xda-developers.com/showpost.php?p=24462102&postcount=1 <<< 2AA Battery Powered Portable USB Power Supply: http://www.amazon.com/gp/product/B003M9Z5F6
I'm using this, as I already have this solar rechargable soulution I use for my phone:
http://www.goalzero.com/shop/p/8/Guide-10-Battery-Pack/2:8/
Nathanation said:
Im hoping to use my otg stuff to read my canon 550d sd card and ive found and an app called DSLR controller which will hopefully let me use my touchpad as a remote viewer for my camera, i'll post a pic of my serup when everything arrives
Click to expand...
Click to collapse
I have a camera buff that wants to use that setup for DSLR, please return to post your configuration and results! :silly:
=== Review of Juiced Systems ACA adapter ===
I got this: http://www.amazon.com/Samsung-Multi-functional-Connection-Kit-Compatible/dp/B006MJZOMW
It appears to be a USB OTG ACA compliant device. Sadly it's for Galaxy Nexus Products and the full ACA compatibility doesn't appear to be implemented in hardware and/or software on the Touchpad with CM9.
1- It does function as OTG host port with the Micro usb from a charger powering the down stream devices. :good:
2- OTG to devices on USB/microSD/SD interfaces works well, but only one at a time for memory volumes (FAT32). Not sure if that's a software shortcoming.
3- Success with a wireless adapter for Logitec mouse/keyboard on USB. :good:
4- Haven't found an NTFS mount solution for Touchpad w/ CM9 nightly 0903.
5- It does connect to the Touchpad, but not with the HP folio case or any case as it's a close fit.
6- The ACA charging of the touchpad while hosting, or otherwise, sadly doesn't work as it was reported to function on SG2.
7- ACA indicator never lights up for charging or host.
Initial Result:
- At $20USD there are fewer cables, but full ACA charging doesn't work, which was my motivation to spend more.
- OTG to devices on USB/microSD/SD interfaces works well, but only one at a time for memory volumes FAT32.
- The physical connection seems a little weak to me. I almost feel like it could break off damaging the adapter, or worst, the micro USB interface.
Further tests:
- I want to check if the Wirless mouse/keyboard on USB can be used with a SD card in either slot.
- I'd also like to test of external HUB with devices further downstream such as self powered HDD and seperate USB Mice, Keyboards (for deskside use).
- Can anyone recommend a ICS compliant USB GPS & app?
Although this setup with: Touchpad, USB battery, Juice adapter, is simple and elegant, its pricy for features I'm not able to use (charging while host). I'm not impressed it will be rugged enough for field use.
Here is my recommended portable solution, which is also cheaper:
- HP Touchpad
- Battery soulution of choice <<< $4.25USD
- OTG host cable & power Y combo: http://www.ebay.com/itm/Micro-USB-H...i9100-S3-i9300-i9220-i9250-XOOM-/140825132367 <<< $6USD
- USB memory / flash drive of choice
(or other USB device that is ICS compatible with HP Touchpad)
:victory:
Will do
Im getting the camera tomorrow and the cables and adapter should arrive soon!
Sent from my HTC EVO 3D X515m using Tapatalk 2
Hello everyone just wanna ask that does this device supports usb otg or not has anyone used pendrive on it? If yes then how ? Actually bought authentic xiaomi type c to micro usb female adapter but unluckily its not working with otg please help anyone?
It should works. But not every adapter support it. For example Xiaomi USB adapter bought on ibuygou.com doesn't work (wtf Xiaomi)
Wysłane z mojego Mi-4c przy użyciu Tapatalka
Tfgru said:
It should works. But not every adapter support it. For example Xiaomi USB adapter bought on ibuygou.com doesn't work (wtf Xiaomi)
Wysłane z mojego Mi-4c przy użyciu Tapatalka
Click to expand...
Click to collapse
I also bought authentic mi type c to micro usb female adapter its not working with otg only charging works
i have bought this one and its working fine...
Andiii said:
i have bought this one and its working fine...
Click to expand...
Click to collapse
Thanks a lot man for helping btw pendrive works with this on miui eu rom ?
YES if the stick is formatted FAT32 - for NTFS exFAT etc... you will need third party software available at the play store.......
I had a problem with one single USB 3.0 stick which simply is not recognized. But two other USB 3.0 worked fine. So i think its an incompatibiliy issue.
Andiii said:
YES if the stick is formatted FAT32 - for NTFS exFAT etc... you will need third party software available at the play store.......
I had a problem with one single USB 3.0 stick which simply is not recognized. But two other USB 3.0 worked fine. So i think its an incompatibiliy issue.
Click to expand...
Click to collapse
How did you connect your drives ? Via adapter?
yes via Adapter C male to A female (linked in post #4)
i couldn't get it to work with a usb otg adapter + a xiaomi type c adapter
Tested using this otg cable from ali express:
w w w.aliexpress.com/item/2016-New-Arrival-Micro-USB-C-3-1-Type-C-Male-to-USB-3-0-Cable/32522054659.h t m l
(remove the spaces from start and end)
and usb flash, mouse and keyboard are all working fine with my Xiami Mi 4c. OTG won't work using the micro usb converter (also tried and tested). Only the direct USB Type C OTG cable will work as the one in the above link.
junaidawan86 said:
Tested using this otg cable from ali express:
w w w.aliexpress.com/item/2016-New-Arrival-Micro-USB-C-3-1-Type-C-Male-to-USB-3-0-Cable/32522054659.h t m l
(remove the spaces from start and end)
and usb flash, mouse and keyboard are all working fine with my Xiami Mi 4c. OTG won't work using the micro usb converter (also tried and tested). Only the direct USB Type C OTG cable will work as the one in the above link.
Click to expand...
Click to collapse
What is the reason behind not working with micro usb adapter? Does anybody know?
Talha7866 said:
What is the reason behind not working with micro usb adapter? Does anybody know?
Click to expand...
Click to collapse
As per my understanding, it has to do with the difference in standards of type C and normal micro usb. Therefore the converter only works for charging n data transfer and not while u use the port in host mode (for usb flash and other peripherals).
junaidawan86 said:
As per my understanding, it has to do with the difference in standards of type C and normal micro usb. Therefore the converter only works for charging n data transfer and not while u use the port in host mode (for usb flash and other peripherals).
Click to expand...
Click to collapse
Okay thanks
Talha7866 said:
Okay thanks
Click to expand...
Click to collapse
Welcome bro
I´m using solid explorer and otg plugin from playstore. It works perfectly with fat32 and NTFS flashdrives and some HDD´s.
Talha7866 said:
What is the reason behind not working with micro usb adapter? Does anybody know?
Click to expand...
Click to collapse
I'm pretty sure it's because USB type C and USB type A use different lanes/wires (physical) for transferring data and the adapter links up different ones. That's just the standard I'm afraid.
Suppoted
after much testing it works with every native usb type c flash memory or other. that means that if u use an adapter from micro usb to usb type c or an otg adapter it won't work.
I've been looking around for an OTG cable that will work with my Mi 4c and haven't got any guarantees from any I've viewed that it will work with Mi 4c. I know for sure the 4c supports OTG. Does anyone know of a cable that works?
You need to have Type-C OTG converter, there are alot on Ali Express sold with reference to Nexus 5x & mi4c
dark_prince said:
You need to have Type-C OTG converter, there are alot on Ali Express sold with reference to Nexus 5x & mi4c
Click to expand...
Click to collapse
I know, I was asking if anyone knew of one that was guaranteed to work with the 4C. A link perhaps?
i use the old micro usb cabel with a usb type c adapter (cost like 1$) and works well
itzikd1 said:
i use the old micro usb cabel with a usb type c adapter (cost like 1$) and works well
Click to expand...
Click to collapse
Fascinating, that didn't seem to work with me. Though the adapter works for charging.
Benjamin_Mac said:
Fascinating, that didn't seem to work with me. Though the adapter works for charging.
Click to expand...
Click to collapse
does it work with data sync on pc?( i havnt tried mine) but im pretty sure it wont work. and if it does it means the OTG cabel is not good.
by the way i checked this only with a mouse, not usb , might be a diffrent issu.
itzikd1 said:
does it work with data sync on pc?( i havnt tried mine) but im pretty sure it wont work. and if it does it means the OTG cabel is not good.
by the way i checked this only with a mouse, not usb , might be a diffrent issu.
Click to expand...
Click to collapse
The OTG cable has been tested to work (Nexus device and Xperia) and the adapter works for data sync. I have only tried with USB though, so that might be the issue
Hello !
Problem is more that a lot of USB sticks/devices are not recognized. The adpaters that I have worked well, but only every third USB stick.
Benjamin_Mac said:
Fascinating, that didn't seem to work with me. Though the adapter works for charging.
Click to expand...
Click to collapse
tafkab60 said:
Hello !
Problem is more that a lot of USB sticks/devices are not recognized. The adpaters that I have worked well, but only every third USB stick.
Click to expand...
Click to collapse
I ordered this one:
https://www.aliexpress.com/item/Elo..._2&btsid=c8d2641a-70b4-46fd-bad6-ec0e0eede4ed
works perfectly. It arrived today after about 3 weeks. Working perfectly with my NTFS formatted HP 8GB and Kingston 16GB Flash Drives. My HP USB flash drive is v220w and Kingston's is Data Traveler 2.0
you need to reformat with Allocation unit not more than 16kb if your flash drive isnt recognized. I keep mine at 8kb while formatting.
Nice
Somebody seriosuly screwed USB OTG functionality here.
I mean copying 138MB from internal drive to USB takes like 10 minutes?
C'mon!
I use a Sandisk USB 3.0 USB A / USB C stick.
I use a otg and connected to a sd card reader, I move psp roms with a very good speed, but not like 10 minutes for example 500mb
Enviado desde mi F8331 mediante Tapatalk
doministry said:
Somebody seriosuly screwed USB OTG functionality here.
I mean copying 138MB from internal drive to USB takes like 10 minutes?
C'mon!
I use a Sandisk USB 3.0 USB A / USB C stick.
Click to expand...
Click to collapse
I use the SanDisk ultra dual type c and the speed is disappointing (transfer speed )
eddieleon7pc said:
I use the SanDisk ultra dual type c and the speed is disappointing (transfer speed )
Click to expand...
Click to collapse
I think I use the same one. And speeds are just terrible.
Mobisystems answered they are aware of the problem.
I ordered a micro sd reader to use with my new PH1 that was listed as working with the Samsung S8. Thinking that it would work, since the PH1 has the same chipset, I gave it a try, but to no avail, it doesn't work at all with the PH1, at least not with the latest stock firmware.
Has anyone had luck with a reader?
FYI, this one most definitely is not compatible.
1st a question; have you already activated USB Debugging?
Android 9 Pie:
Settings/System/Advanced/Developer options/USB Debugging
2nd I have found some software (apps) may not see a connected memory card, when others will on some adapter. Possibly try an alternate file browser.
Attached pic's:
I have been using a few different Samsung USB-C to Micro-USB & USB-2.0 adapters to attach various memory cards & Card Readers and have exerienced comment 2 above.
Hopefully something here of assistance.
Regards,
Edit: appears to be issue with uploading photos to XDA so, external links provided.
https://drive.google.com/file/d/1Jy-U6niCIzxUH_pylNvsgUBVsP8fXKR4/view?usp=drivesdk
https://drive.google.com/file/d/1P8XA6rD7otq2FSAiotlzAV-xmgGVoqJ7/view?usp=drivesdk
Spey said:
1st a question; have you already activated USB Debugging?
Android 9 Pie:
Settings/System/Advanced/Developer options/USB Debugging
2nd I have found some software (apps) may not see a connected memory card, when others will on some adapter. Possibly try an alternate file browser.
Attached pic's:
I have been using a few different Samsung USB-C to Micro-USB & USB-2.0 adapters to attach various memory cards & Card Readers and have exerienced comment 2 above.
Hopefully something here of assistance.
Regards,
Edit: appears to be issue with uploading photos to XDA so, external links provided.
https://drive.google.com/file/d/1Jy-U6niCIzxUH_pylNvsgUBVsP8fXKR4/view?usp=drivesdk
https://drive.google.com/file/d/1P8XA6rD7otq2FSAiotlzAV-xmgGVoqJ7/view?usp=drivesdk
Click to expand...
Click to collapse
Yes, I have USB debugging enabled.
I have the same Sandisk USB A/Micro USB flash drive. It works fine with a USB micro to C adapter. The micro SD card reader that I had bought wasn't compatible. The USB system options (same menu when connecting the phone via USB to a computer) wouldn't let me select the option to allow the phone to control the USB device.
I'm just hoping someone has found a micro SD card reader that works with this phone. Sure, I can return incompatible devices for a refund, but I'd like to avoid the hassle, if at all possible.
This is the one I use with my phone and it works fine https://www.amazon.com/gp/product/B078Y2C2K8/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 unfortunately its unavailable right now but maybe one of the other ones by that company that's available may work but then again they may not. Hopefully this will at least help you out a little bit.
I use the Scandisk OTG Flash drive Type C found here, its about the size of a quater :
I like this one it works flawlessly
Silicon Power 32GB 3 IN 1 USB Type-C, Micro B and Type-A USB 3.1 Gen1 Flash Drive for PCs & Macs, and Micro-B Smartphones or Tablets https://www.amazon.com/dp/B07F9RQNND/ref=cm_sw_r_cp_apa_i_ep2kCbJTFB3EX
Sent from my PH-1 using Tapatalk
---------- Post added at 08:59 AM ---------- Previous post was at 08:58 AM ----------
eKeith said:
Silicon Power 32GB 3 IN 1 USB Type-C, Micro B and Type-A USB 3.1 Gen1 Flash Drive for PCs & Macs, and Micro-B Smartphones or Tablets https://www.amazon.com/dp/B07F9RQNND/ref=cm_sw_r_cp_apa_i_ep2kCbJTFB3EX
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Sorry, didn't read title properly...
Sent from my PH-1 using Tapatalk