I have MQX 4k pro tv box and it is stays on red dot and it can't connect to tv...
I have tried
burning tool
batchtool
androidtool
It only connects to android tool and when I try to flash it it goes to test device and stops, sayin test device failed
I have RK 329...
how to fix it pls help me
BTW I am new and I don't know of this is the right place to ask...I am sorry for any inconvenience
TY
VesbGreen said:
I have MQX 4k pro tv box and it is stays on red dot and it can't connect to tv...
I have tried
burning tool
batchtool
androidtool
It only connects to android tool and when I try to flash it it goes to test device and stops, sayin test device failed
I have RK 329...
how to fix it pls help me
BTW I am new and I don't know of this is the right place to ask...I am sorry for any inconvenience
TY
Click to expand...
Click to collapse
Any one ? some help?
Related
hi guys...please (like title says) i have a problem while trying to upgrade optimus one to 2.3. ... when it starts updating(not DOWNLOADING the update) it blocks to 4% and the display shows : Emergency mode...and after 5 mins the program says that is a problem with the connection Phone-PC or PC-phone....and said that i must unplug the USB cable and battery...i've done that and...same problem....someone can help me?(pLease)...what can i do? (sorry if i have a bad english )
Anyone?Please!!!!
I can't even download it... the loading animation keeps spinning and spinning :\
Wrong thread, sorry.
Plesk is complicated in my opinion, it's not newbie friendly and a generic webmaster is not familiar with its interface.
MoKaA said:
hi guys...please (like title says) i have a problem while trying to upgrade optimus one to 2.3. ... when it starts updating(not DOWNLOADING the update) it blocks to 4% and the display shows : Emergency mode...and after 5 mins the program says that is a problem with the connection Phone-PC or PC-phone....and said that i must unplug the USB cable and battery...i've done that and...same problem....someone can help me?(pLease)...what can i do? (sorry if i have a bad english )
Click to expand...
Click to collapse
You using LG pcsuite to update the rom ? You can use Kdz, or the russian tool for flashing the official gingerbread.
check your phone specific forum for further information.
http://forum.xda-developers.com/forumdisplay.php?f=836
I'm not touching that KDZ crap, the instructions I saw said you had to disable the LG Virtual Device on the system hardware config or your phone would get immediately bricked. Also said you should exit all programs and so on, didn't make me comfortable at all, seemed like anything could go wrong at any second.
MoKaA said:
hi guys...please (like title says) i have a problem while trying to upgrade optimus one to 2.3. ... when it starts updating(not DOWNLOADING the update) it blocks to 4% and the display shows : Emergency mode...and after 5 mins the program says that is a problem with the connection Phone-PC or PC-phone....and said that i must unplug the USB cable and battery...i've done that and...same problem....someone can help me?(pLease)...what can i do? (sorry if i have a bad english )
Click to expand...
Click to collapse
Hi, I had same problem too and try some other procedures, but finally works this:
1) uninstal all LG drivers and applications
2) install LG update tool (LG Mobile Update from LG website) and USB drivers (download via that tool, C:\LGP500\USB_Driver\LGUnitedMobileDriver_....)
3) remove SD card from phone
4) upgrade via LG Mobile Update
5) my phone frozen on adroid logo so I must hard-reset phone (HOME - SEARCH - VOLUME+ until Androidman shows). First phone load after 2-3 minutest so try wait before hard-reset
I read other forums and I think that SD card was problem.
Complete instructions (in czech) goo.gl/MYuO9
MoKaA said:
hi guys...please (like title says) i have a problem while trying to upgrade optimus one to 2.3. ... when it starts updating(not DOWNLOADING the update) it blocks to 4% and the display shows : Emergency mode...and after 5 mins the program says that is a problem with the connection Phone-PC or PC-phone....and said that i must unplug the USB cable and battery...i've done that and...same problem....someone can help me?(pLease)...what can i do? (sorry if i have a bad english )
Click to expand...
Click to collapse
I updated my P500 10 minutes ago.It was rooted,with a custom kernel from mik_os(many thanks to that mate).I installed LG PC Suite IV from my phone,and updated it(the suite,not the phone).After that,I updated the phone.It got stuck in Emergency Mode!! for 15 minutes,and then it rebooted.It took 2 minutes for it to fully load,I had lost some application data but everything else looked intact.
Try reinstalling all the programs involved in this procedure.I hope this helps.
Same problem here ...
Did you solved this problem ?
Tell us how !
Same problem here !
:crying:
Hi i have an problem with an Idol3, i started flashing him with Panasonic Eluga Switch software but i unplugged it BEFORE i get the error (i waited 10 min after being stucked at 45%), so idol 3 is locked on Android power screen and when i launch the Panasonic soft in download mode , it give me an error at 2% error 40011 'check driver or handset', i executed the software as both admin and normal user but i didn't worked. Its not my phone and i'm helping a friend through TeamViewer, and he doesnt have another computer to test and i don't want him pay for that. So it would be cool if someone give me a possible solution. Thanks
Issou said:
Hi i have an problem with an Idol3, i started flashing him with Panasonic Eluga Switch software but i unplugged it BEFORE i get the error (i waited 10 min after being stucked at 45%), so idol 3 is locked on Android power screen and when i launch the Panasonic soft in download mode , it give me an error at 2% error 40011 'check driver or handset', i executed the software as both admin and normal user but i didn't worked. Its not my phone and i'm helping a friend through TeamViewer, and he doesnt have another computer to test and i don't want him pay for that. So it would be cool if someone give me a possible solution. Thanks
Click to expand...
Click to collapse
Try to install drivers and then try with panasonic....
Hello I try to install with odin a new android version on my note 5 and it gave me fail . Now I have a blue screen on it saying to resolv the problem with Smart Switch , but when I connect the phone ,Smart Switch does not reconize my phone . I don't know what to do ,you might help me with some ideas .10x in advance.
PaulHoras said:
Hello I try to install with odin a new android version on my note 5 and it gave me fail . Now I have a blue screen on it saying to resolv the problem with Smart Switch , but when I connect the phone ,Smart Switch does not reconize my phone . I don't know what to do ,you might help me with some ideas .10x in advance.
Click to expand...
Click to collapse
Thread closed.
Duplicate:
http://forum.xda-developers.com/general/xda-assist/odin-flash-failure-t3429537
Do not create a thread or post more than once.
Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
@Antiga Prime & @Adrian DC any view .
srd34 said:
Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
@Antiga Prime & @Adrian DC any view .
Click to expand...
Click to collapse
Regardless of what you may or may not have done for that to happen, I would try following this guide.
You need to register an account in order to download the files, btw.
@Antiga Prime
Reached to a level where S1 tool works but shows Unknown SIN version . snapshot attached and again stuck ,
thanks added for your quick response and related link .
what else can be done
Antiga Prime said:
Regardless of what you may or may not have done for that to happen, I would try following this guide.
You need to register an account in order to download the files, btw.
Click to expand...
Click to collapse
srd34 said:
@Antiga Prime
tried using the steps shown except for opening the phone part for test point and got error attached .
Thanks for the link though . any other view ?
Click to expand...
Click to collapse
You're welcome. Any other view? No, but the entire point of that tutorial is that you have to use the testpoint, that's why you're getting that error. If you don't feel confident enough to do it yourself, I guess you'll have to take it to a repair shop.
@Antiga Prime There is an update now . need correct SIN file for xperia TX refer snapshot ..
Antiga Prime said:
You're welcome. Any other view? No, but the entire point of that tutorial is that you have to use the testpoint, that's why you're getting that error. If you don't feel confident enough to do it yourself, I guess you'll have to take it to a repair shop.
Click to expand...
Click to collapse
srd34 said:
@Antiga Prime There is an update now . need correct SIN file for xperia TX refer snapshot ..
Click to expand...
Click to collapse
I have never done this procedure, by the way, but what I can gather from your screenshot is that either the person who wrote the tutorial I linked to originally made a mistake and uploaded the wrong file, or you're using the wrong file. It seems that at some point you might have also downloaded the file found here, which is a forum post for Xperia SP. I do not know which one is the correct file, but just make sure you're using the correct one. If the one posted in the tutorial I linked to doesn't work, I guess you'd have to find one that does.
Thanks , but it seems this SIN file is also not compatible .
Seems the last resort is to reach service center .
Antiga Prime said:
I have never done this procedure, by the way, but what I can gather from your screenshot is that either the person who wrote the tutorial I linked to originally made a mistake and uploaded the wrong file, or you're using the wrong file. It seems that at some point you might have also downloaded the file found here, which is a forum post for Xperia SP. I do not know which one is the correct file, but just make sure you're using the correct one. If the one posted in the tutorial I linked to doesn't work, I guess you'd have to find one that does.
Click to expand...
Click to collapse
srd34 said:
Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
@Antiga Prime & @Adrian DC any view .
Click to expand...
Click to collapse
Hello. Have you find the decision about QH SUSB on TX?
No solution yet . The device still with me and gets blinked when connected with charger , however . No solution to recover from hard brick I believe . Service centre also of no help since this model was a limited edition one and they dont have in their SKU list to do anything . keeping as fancy paper weight
hi
I'm accidentally flash my h96 max rk3318 wrong firmware
device is almost dead
no led screen work
hdmi no signal
only one red led is blink on board
Device detect with maskrom mod
I'm try to fix with factory tool, RockChip_Batch & AndroidTool but all software says download boot fail
read flash id = download boot fail
read flash info = download boot fail
test drive = download boot fail
I'm use multiple usb cable with multiple pc but cant flash
any hope for this device ?
please help me
thanks
Please help me.if anyone know how to fix this problem
sonuedit1 said:
Please help me.if anyone know how to fix this problem
Click to expand...
Click to collapse
Hi, did you try the instructions in the website? Mine also got bricked(even though I did not do anything). It got stuck at displaying "BOOT" in the LED display and no video output. Following the instructions in the official website fixed it.
Am not able to enter a proper url as am new here. So add the www in the beginning.
h96tvbox.com/content/6-Firmware-upgrade
I have the same with my H96 max rk3318. See this post https://forum.xda-developers.com/t/h96-max-problem.3742205/post-85427963