Database Info

[Q] Sensation XE Fully hard bricked , PLZ HELP !

Hi there , I was trying to use JuonuputBear to S-OFF my phone through the wire trick , so I was doing the wire trick (after several failing tries) , and somehow the phone was a total brick , doesn't take usb or charge led ... So I looked into this and I found a QHSUSB_DLOAD fix for that , however my phone doesn't even enter or appear as it is in that mode , I tried doing the wire trick while the phone is dead it didn't work , I tried my linux machine the QHSUSB_DLOAD the phone wasn't found ! I guess the bootloader was wiped when Jounuput bear was doing its stuff , plz help me guys !
EDIT : I don't think anymore the bootloader is wiped since I didn't reach the part where it installs JuonuptBear's bootloader ! PLease any ideas !

you should have posted this in the Q&A section. You arent going to get much help here, just people ranting on the fact that you posted a question in the development issue. Mods should probably move this to that section. As for your problem, i can't really help. sorry

thx , I will tell a mod to move my thread :'(

Have you tried using the Sensation unbrick thread?

try unbricking project or ask in juopunutbear's thread

It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?

seaskyways said:
It tells me to use QHSUSB , which isn't working for me , may you plz link me to it so I could ensure ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1522351

rzr86 said:
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
My phone is not being detected , I removed everything , I try to detect , nop ...

seaskyways said:
My phone is not being detected , I removed everything , I try to detect , nop ...
Click to expand...
Click to collapse
while doing the juopunutbear method did you have enough battery?
if not remove battery,sdcard and sim and charge it as it is for 5-6 hours
then put them back and switch on the device normally

I had 99% charge !

seaskyways said:
I had 99% charge !
Click to expand...
Click to collapse
did you check the troubleshoot from the guide you used?
edit:it is better to post your issue also in the thread you used

Troubleshooting in the jounuputbear thread is for live phones , not for dead phones ...

Any help guys ?!?!

seaskyways said:
Any help guys ?!?!
Click to expand...
Click to collapse
the only thing i can tell you is use jtag.
i am out of ideas

Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help
EDIT : Maybe AdamOutler :?

seaskyways said:
Thats what I finally thought about , but I know nothing at all about JTAG , I need professionel help
EDIT : Maybe AdamOutler :?
Click to expand...
Click to collapse
i never used jtag.i have no experience on it
you can go in a local repair shop.probably they can fix it

I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !

seaskyways said:
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
Click to expand...
Click to collapse
troubleshoot
glad for you man

seaskyways said:
I got it to boot !!! I re-ran the joupunut thing , and tried doing the wire-trick before the phone even shows any sign , instantly the PC showed that qhsusb mode , and everything went alrighty !! Maybe this can be an answer for others !
Click to expand...
Click to collapse
Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.
Can you tell me what you did? Thank you!

whohitme said:
Hello, I am having a simliar issue with the Windows driver error coming up when trying to get S-Off after the wire trick. I was able to restore fine, but everytime I am about to get a successful wire trick it gives me the driver error.
Can you tell me what you did? Thank you!
Click to expand...
Click to collapse
Please try and use my Guide here http://forum.xda-developers.com/showthread.php?t=2247319 i am very confident if used it will be fine and should let you proceed without any errors

[Resolved] [Q] [HELP] Is my MTK6589 phone hard bricked ?

EDIT : SOLVED :
Many thanks to slot78
Hello all.
I got my hands on a Inew I2000 phone (Mediatek 6589 cpu). I tried to flash it with the latest rom, and might have hard bricked it. Can you help me say if it is indedd hard-bricked, and if not how to revive it ?
What I did :
I used Flash Tool 3.1312
Got the rom from this page : http://www.needrom.com/mobile/inew-i2000/
After fighting with the drivers for a while, it seems my phone is ready to flash.
I selected the scatter-loader, cliced "firmware upgrade"
Pluged the phone.
The upgrade seemed to work fine. I got to the green circle. I unpluged phone. But hte phone didn't boot.
After that, nothing.
The phone doesn't seem to reac to anything. The screen stays black.
When I plug it, the list in device manager moves a bit ( showing that it still react to pluged USB) But I can't find the device anywhere on the list.
When I try to flash anything with flash tool, I clic load. Then, when I plug the phone, the loading start. But when the red bar reach 100%, nothing more happens.
From what I've found with google so far, it looks like I somehow had the wrong pre-loader in my ROM.
Now, I'm opened to suggestions.
Any way I can be sure wrther my phone is bricked or not ?
If not, what is the next step to revive it ?
Thanks in advance for any help.

Hello!
I think i can help to you! Send me a private message and tonight i will message back with the sollution...just i working now.
kaceps said:
Hello all.
I got my hands on a Inew I2000 phone (Mediatek 6589 cpu). I tried to flash it with the latest rom, and might have hard bricked it. Can you help me say if it is indedd hard-bricked, and if not how to revive it ?
What I did :
I used Flash Tool 3.1312
Got the rom from this page : http://www.needrom.com/mobile/inew-i2000/
After fighting with the drivers for a while, it seems my phone is ready to flash.
I selected the scatter-loader, cliced "firmware upgrade"
Pluged the phone.
The upgrade seemed to work fine. I got to the green circle. I unpluged phone. But hte phone didn't boot.
After that, nothing.
The phone doesn't seem to reac to anything. The screen stays black.
When I plug it, the list in device manager moves a bit ( showing that it still react to pluged USB) But I can't find the device anywhere on the list.
When I try to flash anything with flash tool, I clic load. Then, when I plug the phone, the loading start. But when the red bar reach 100%, nothing more happens.
From what I've found with google so far, it looks like I somehow had the wrong pre-loader in my ROM.
Now, I'm opened to suggestions.
Any way I can be sure wrther my phone is bricked or not ?
If not, what is the next step to revive it ?
Thanks in advance for any help.
Click to expand...
Click to collapse

I answer here,ok? Important info...
As you say in pm, yes the sollution the "test-spot"!
You have the truth!
http://www.4shared.com/download/5Y4TKOCfba/service_spot__1_.jpg?lgfp=3000
There is the spot!
You need to remove the back cover and you need 3 item: a piece of wire, a screwdriver (fot the back cover) and a rubber-ring.
First remove almost all the screw, except next to sd card slot (bottom left corner of the sd card slot)...This screw fix the main board and you can remove the back cover without remove this screw.
Put the battery to right position and fix it with rubber ring to the phone.
Prepare with the flash tools and rom, for flashing...(usb cable conect to the pc, scatter file etc...)
Start the flashing with the downlad button and inmediatly sort the spot with the motherboard screw (what you didn't remove) with the wire.
Waiting for the green circle! And Enjoy!
Pls let me know if you successful!
The problem was i think...There is two different mainboard in Inew i2000 the v1.1 and the v2.1...The newer stock roms belongs to second.
Here is a KitKat THEMED (it's just 4.2.1) rom: http://www.4shared.com/zip/WHdOpLytba/07_resurrection_feelKat.html
(little bit lightweighted and optimized) It's for PCB v1.1
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Here is the lastest CWM based touch recovery
http://www.4shared.com/file/3qNEh_3Vce/recovery.html
Best Regards

I haven't succeded (yet) but thanks a lot for the info.
I think I got the right point on the motherboard. When I connect it, I can see a white led lightning up near the ubs port on the phone. So, I guess connecting the point makes my phone react.
But I think I might have a driver problem now.
Here is what happened.
Launch Flashtool as admin.
Load a scatterfile (any file, at this point I just want to be able to flash anything.)
Battery in, usb cable connected
press load.
the red progress bar imediately reach 100%
I try to connect he testpoints.
nothing more happens. Sometime I see various errors, not always the same.
Before finding the test point method, I tried all kind of drivers. Now I'm not sure which one is left on the system or wich is the correct one.
Anyway thanks for pointing the test points to me !
Also, thanks for the recovery and the ROM.
But none of them contains a preloader / scatter file. So, at this point, even if I get the right drivers I can't load them. I'll try them later if I manage to revive the phone, but right now my aim is ...
1 / Cleanup the drivers, and reinstall the right one
2 / Get flash tool to load anything on the phone via test point
3 / Find the right preloader and load it via test point
If I manage to do that, then I should be able to put back the back cover, and load the recovery "normally".
In the meantime, any advice is highly welcome.
Like :
- Any tips for cleaning up / installing drivers ?
- Any idea what the right preloader is ?
- Precise order on what to plug when flashig ( Battery / plusg USB / Load in flashtool / Connect points ? )
But more than eveything, thank you ! I might not have succeded yet, but at least I am not stuck anymore. Before your post I didn't know what to do. At least, now I have the test point and I can try something.
Also, sorry for the late answer. I had a lot on my plate, and didn't realise you had answered.
I suscribe to be sure not to miss any more answer.
Skot78 said:
I answer here,ok? Important info...
As you say in pm, yes the sollution the "test-spot"!
You have the truth!
http://www.4shared.com/download/5Y4TKOCfba/service_spot__1_.jpg?lgfp=3000
There is the spot!
You need to remove the back cover and you need 3 item: a piece of wire, a screwdriver (fot the back cover) and a rubber-ring.
First remove almost all the screw, except next to sd card slot (bottom left corner of the sd card slot)...This screw fix the main board and you can remove the back cover without remove this screw.
Put the battery to right position and fix it with rubber ring to the phone.
Prepare with the flash tools and rom, for flashing...(usb cable conect to the pc, scatter file etc...)
Start the flashing with the downlad button and inmediatly sort the spot with the motherboard screw (what you didn't remove) with the wire.
Waiting for the green circle! And Enjoy!
Pls let me know if you successful!
The problem was i think...There is two different mainboard in Inew i2000 the v1.1 and the v2.1...The newer stock roms belongs to second.
Here is a KitKat THEMED (it's just 4.2.1) rom: http://www.4shared.com/zip/WHdOpLytba/07_resurrection_feelKat.html
(little bit lightweighted and optimized) It's for PCB v1.1
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Here is the lastest CWM based touch recovery
http://www.4shared.com/file/3qNEh_3Vce/recovery.html
Best Regards
Click to expand...
Click to collapse

Hello Again!
For the recovery you do not need new scatter file, use the original.
You can install the new rom from CWM recovery.
So let's see the problem.
First i need that error messages, it's important!
Try to use different usb cable/usb port/computer (operation system).
And different version of Flashtools.
I use this:
http://www.4shared.com/zip/CBA1yGcq/SP_Flash_Tool_v313040119.html
And this drivers:
http://www.4shared.com/zip/TPj497mj/6577driver_install_3_steps.html
But i need the error codes...Meanwhile you can contunie trying. We will save that phone!
Best Regards

Thanks again.
I'm already using this version of Flashtool. I'll try your drivers as well.
I might have some more question later on, but for now I think I need to try again when I've slept a bit. Maybe things will seems clearer tomorow I'll keep you updated later this week end.
Skot78 said:
Hello Again!
For the recovery you do not need new scatter file, use the original.
You can install the new rom from CWM recovery.
So let's see the problem.
First i need that error messages, it's important!
Try to use different usb cable/usb port/computer (operation system).
And different version of Flashtools.
I use this:
http://www.4shared.com/zip/CBA1yGcq/SP_Flash_Tool_v313040119.html
And this drivers:
http://www.4shared.com/zip/TPj497mj/6577driver_install_3_steps.html
But i need the error codes...Meanwhile you can contunie trying. We will save that phone!
Best Regards
Click to expand...
Click to collapse

kaceps said:
Thanks again.
I'm already using this version of Flashtool. I'll try your drivers as well.
I might have some more question later on, but for now I think I need to try again when I've slept a bit. Maybe things will seems clearer tomorow I'll keep you updated later this week end.
Click to expand...
Click to collapse
Okay, keep me in touch! I will help if i can!
And will check de error codes pls!
Skot

Skot78 said:
Okay, keep me in touch! I will help if i can!
And will check de error codes pls!
Skot
Click to expand...
Click to collapse
Quick update.
On device manager, the phone appear under "Ports com and LTP" as "MTK USB Port (com12)" Or other port number if I use other USB ports.
The error message I sometime get is BROM ERROR : S_PORT_COM_OPEN_FAIL (1013)
[COM] Failed to open port COM12
Wether I get the message or not depends on the order I do thing. ( Plus phone first, load after, or load and plug after ...)
So far, same reaction as always. The red progress bar goes to 100% very quicky, then nothing more happens.
EDIT ;
YES ! Phone résurected !
What I did :
phone not pluged, test points already connected
Windows -> write memory.
Go to tab Write memory
Open raw data -> select preloader.bin
select EMMC
Adress 0x0000000000
length 0x00600000
Write
Plug phone (with test point already connected)
The prelaoder gets written -> green circle.
unplug phone
After that back to main tab
select scater file from the same image, clic firmware upgrade
connect phone
Loading goes through ...
Green circle,
Phone switch on -> Success !
Thanks a lot, I will now try to flash the CWM recovery and the rom you recommended ... but later.
Right now my phone can boot again, and that's awesome !

kaceps said:
Quick update.
On device manager, the phone appear under "Ports com and LTP" as "MTK USB Port (com12)" Or other port number if I use other USB ports.
The error message I sometime get is BROM ERROR : S_PORT_COM_OPEN_FAIL (1013)
[COM] Failed to open port COM12
Wether I get the message or not depends on the order I do thing. ( Plus phone first, load after, or load and plug after ...)
So far, same reaction as always. The red progress bar goes to 100% very quicky, then nothing more happens.
Click to expand...
Click to collapse
Yikes!
Looks like, there is only usb driver related or op system related problem. (for this moment)
I looking for different driver and give it a try.
tonight...

Lol, you must have answered while I was editing my post.
As I said, Phone resurected ! Success !
It is now booting normally, with a stock rom.
Next steps are
1 / CWM + the rom you suggested.
2 / Fix memory to use the whole memory on one system partition. (It seems the i2000 for some reason does not use all the available memory.)
But all that is not problematic anymore. I just need the time to get to it
Many thanks for your precious help, I wouldn't have been able to do it without you.
Skot78 said:
Yikes!
Looks like, there is only usb driver related or op system related problem. (for this moment)
I looking for different driver and give it a try.
tonight...
Click to expand...
Click to collapse

Aswome!
Congratulations!
http://www.4shared.com/mobile/C4f0jQeEce/meteos-mtk6589-rom-edit-8gb-16.html
It's an apk for repartitioning your memory! Use only maximum 1,5 GB system memory options!
After that you must reflash the rom of course and your internal sd will cleared too!
But not the cwm recovery!
I'm happy now!

Get the 2.7 GB of memory on one partition ... OK
Get more available memory ... nope. Not sure it is actually possible on my version.
CWM ... OK
insall the kitkat themed rom you gave ... I don't know.
Skot78 said:
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Click to expand...
Click to collapse
How long exactly ? Because I think the 4 color moving logo has been displayed for 15 minutes now.I know first boot can be long ... but at what point do I decide the phone is not just slow booting but actually stuck ?
Edit : Well, I'll stop at 30min I think.
But even if this one doesn't work for me, I would be interrested to know where you found custom roms for inew I2000 phone. I haven't been able to find a single one with google.

Hardbricked mtk6589 device,i more like to live dangerously ,but serious,i never hardbricked my device,i have softbricked my sgy when i was trying compile my custom kernel XD
Sent from my N986 using xda premium

kelvinvalencio said:
Hardbricked mtk6589 device,i more like to live dangerously ,but serious,i never hardbricked my device,i have softbricked my sgy when i was trying compile my custom kernel XD
Sent from my N986 using xda premium
Click to expand...
Click to collapse
Well, depends on what you call hardbrick and soft brick.
I bricked it using only software. So, it's soft.
But I had to open it and attach a wire to the motherboard to unbrick it ... so kinda hard to.

kaceps said:
But even if this one doesn't work for me, I would be interrested to know where you found custom roms for inew I2000 phone. I haven't been able to find a single one with google.
Click to expand...
Click to collapse
Eh it's will be difficult, you know i customized that rom... Because i did not found too. It was not a really rom develpoment just kind a "patchwork"...
The problem is, you have (i think) v2.1 board in your Inew I2000...In Hungary...one company sold v1.1 verzion...it called "Myaudio 508"...
For the v2.1 i have only stock rom...
But i did only few imporvements....Working GPS (with hw modding too) not blurry cam (hw too) different launcher, customized bootanim, different (and less) system ringtones and notifications. Some build.prop tweaking...etc...etc...
I try to make 4.2.2, because i have a working version, but still have two bugs, but that harder bugs and my phone sadly dead.
http://forum.xda-developers.com/showthread.php?p=50010654
My motherboard have a contact issue and i cant find replacement anywhere...I asked chinese factories...i asked russian fans...nothing
I'm a sad panda now...And looking for new phone...There are few new very intresting phones!
But if you want ask anything...just do it! if i can, i will help..

Is it possible from battery date 2013.02.25 and green sticker below battery with 2013 05 checked to tell which exactly preloader I need for this bricked phone (quad core)? I tried various sp flash tools versions and various roms dated 2013 03 16, 2013 05 10, 2013 07 06, tried to download only preloader or full rom with variuos errors, usually 4001 and 4032, now only shortening the point method left, but how do I know which exactly preloader I neeed?

Japetas said:
Is it possible from battery date 2013.02.25 and green sticker below battery with 2013 05 checked to tell which exactly preloader I need for this bricked phone (quad core)? I tried various sp flash tools versions and various roms dated 2013 03 16, 2013 05 10, 2013 07 06, tried to download only preloader or full rom with variuos errors, usually 4001 and 4032, now only shortening the point method left, but how do I know which exactly preloader I neeed?
Click to expand...
Click to collapse
You shold check the motherboard version number...Already i know two versions of this phone...The v1.1 and the v2.1...
For the flashtools the firmware names contain "_21" or "_v21"...In previous posts i linked a v21 rom. If you need the older one...i don't have v1.1 rom for flashtools now (because my phone is dead) but you can use the "spot method" and cmw rom + zip firmware form.
Best Regards

Inew I2000 Brikado
Inew I2000 5.7, Mtk6589, 8G. Updated the ROM and correct at all right Flastool plus the smartphone does not turn on and no battery carrega.Vi not the other members had the same problem.

Preciso de ajuda Inew I2000 brickadi
aloizo celso alves cardos said:
inew i2000 5.7, mtk6589, 8g. Updated the rom and correct at all right flastool plus the smartphone does not turn on and no battery carrega.vi not the other members had the same problem.
Click to expand...
Click to collapse
alguem pode me ajudar?
Fiz a atualizacao de rom do inew i2000 5.7 8g com flastool e correu tudo bem, vermelho, rixo, amarelo e verde ok., agora o smart nao liga esta brickado.
Por favor me explique como fazer o metodo de teste da placa mãe, onde tenho que fixar o arame?

Im partition my 8 gb sd card into 6gb 2gb . I want to repartition that is i want to recover my sdcard fully 8gb that is single 8gb . What can i do?? Thanks in advance..
Sent from my GT-S6102 using XDA Free mobile app

R7 PlusM doesn't boot properly anymore

Hi there, I have tried to find a solution today for this issue but I can't find anything useful anywhere .
Last night I received another update via OTA 151115 and proceed to install it as the earlier ones didn't work. Surprisingly this one worked and after restart my phone didn't had any trace of google apps on it, try to install google play, framework and so but the phone says it's not compatible with google (Big time). Then I went to the bootloader to perform a wipe/erase everything and here's when the problem began, it was stuck in the screen that says optimising applications (the one before starting the setup) and after half an hour unattended the phone restart itself one after another, like in a loop.... From this point on, I haven't been able to power on the device anymore.
It was bought through a third party seller from China, already contacted them and waiting for an answer...
Any clue about what can I do to use my phone again?
Update: I can see the oppo logo after pressing volume up plus power buttons for around 15 seconds but it shows for less than a second the screen it appears when it's updating the software and then it switches itself off... Is this a sign of possible recovery in some way?
just downloaded the last 151115 official update from the oppo community forum but I've got a problem. I can not enter the fasboot or recovery mode because the phone is like trying to install something and it constantly switches itself off... The day this happened, I had two files in my root directory, one was the few update and the other was a full Google thing in the same format than the fw file, I'm afraid I selected the wrong one and that's why the phone went crazy. I guess if there's some way to cancel that attempt to update the wrong file or reset that thing in some way, I'd be able to start over but I can't find anything grgrgr
By the way, the last ota update allowed google maps to work flawlessly and also Instagram, two of my biggest concerns with the phone
I'm even trying to contact oppo service to send the thing and sort it out that way xx
Cheers
Pedro

I've just contacted Oppo Customer Service in Europe to see if they have any solution for my problem as I can't make this thing to start and the battery also doesn't seems to be charging though... No response for the moment, just an automated one confirming the reception of my enquiry
Should I start thinking about my lovely new phone as my new paper weight?

peterpanda1970 said:
I've just contacted Oppo Customer Service in Europe to see if they have any solution for my problem as I can't make this thing to start and the battery also doesn't seems to be charging though... No response for the moment, just an automated one confirming the reception of my enquiry
Should I start thinking about my lovely new phone as my new paper weight?
Click to expand...
Click to collapse
No, no you have a chance to save your phone. If you have to R7 plus M Oppo Chinese version, I can help you. I also had this problem, but he was able to solve it. My Skype: ed_mobstyle.

Hi mate, thanks for the answers. Yes it is the China mobile version "M" I don't have Skype I'm afraid grgrgr
Cheers
Pedro

I was able to fix this problem fairly easily.
First I entered recovery (press Power + Volume Down when the phone is booting up)
Then from the device menu I installed a ROM, you want to download the version you last used. (MAKE SURE IT IS FOR THE OPPO R7 PLUS M)
After installing the stock rom, it will go into installation and have you set up your phone.
After you installed the ROM, download OPPO tools v 1.6.5
Open Oppo Tools and root your phone this will take a few minutes.
After you have rooted your device open Oppo Tools again and select Unlock Google Mobile Services (this too me two weeks to figure out).
Let the phone restart, after it is finished, you should have basic google functionalities (Playstore and Frameworks).
Now since you are rooted, it means that your phone will not download any further OTAs and you will have to install them as ROMs, you can do so by repeating the above process, but I'm not sure of the functionality of Oppo Tools past the most current version.
I cant post links to provide you to where the ROM files and Oppo Tools are at this moment
The roms will be located on the "[ROM][STOCK] Official R7 Plus Roms | R7Plus, R7PlusF, R7PlusM [15 Sep 2015]" of Oppo Fourms
The Oppo Tools will be located when you google "OPPO Tools apk" on your computer and it will take you to the thai version of Oppo Fourms follow the link there to download the apk

Hi mate, thanks for your answer but my problems is that I can't enter the recovery mode cause the phone try to install something and then it switches itself off
I've tried to connect the phone to my laptops and sometimes they recognised it as Qhsub something and I can't find anywhere this driver. Then all the softwares I've got ask me for a scatter file which I don't have....
Also trying to contact support from the brand. For now just send them my data and the phone's imei and now waiting for the magic response... They are excessively slow in their answers!
Thanks so much anyway
Cheers
Pedro

hi mate I guess un the malysia oppo community you can fin the drivers and every things about oppo r7pkusM

sollitair said:
hi mate I guess un the malysia oppo community you can fin the drivers and every things about oppo r7pkusM
Click to expand...
Click to collapse
Just checked in and didn't find anything but the bloody oppotools lol.
Cheers mate!

so please if you still with the same problem let me know I'll try to write an email directly to you with all
links you need for it.
[email protected]
best of luck

Still at the same point mate! The thing keeps on trying to install something and switches itself off. My windows laptop runs on win10, the other is a Mac so I guess useless for this matters... The battery runs out faster than ever even being off. Disaster! Lol
I would really appreciate your help
Cheers
Pedro

This is a video I made to explain how this thing try to boot and it never makes it further...
https://www.youtube.com/watch?v=2LNiWODlUd0

Hi matr
believe me I have just coming back from oppo office and I show them your video and what they said '' you have to change it with the guarantee you have''.
it clear now for me and I state that I had the same problem all what I did is installing the oppo drivers on my PC boot on fastboot mode give some commands to unlock it and tjen I flash the original recovery from oppo then tje coloros was installed and updated as well before flashi'g again TRWP recovery and right now I''m writing to you from my r7plusm it's work smothly rooted with the same original oppo rom coloros.
I hope that your just missing something and let me know to to follow you step by step on this.
cheers P

sollitair said:
Hi matr
believe me I have just coming back from oppo office and I show them your video and what they said '' you have to change it with the guarantee you have''.
it clear now for me and I state that I had the same problem all what I did is installing the oppo drivers on my PC boot on fastboot mode give some commands to unlock it and tjen I flash the original recovery from oppo then tje coloros was installed and updated as well before flashi'g again TRWP recovery and right now I''m writing to you from my r7plusm it's work smothly rooted with the same original oppo rom coloros.
I hope that your just missing something and let me know to to follow you step by step on this.
cheers P
Click to expand...
Click to collapse
Hi mate, my problem is that my computer detects the phone as qhsusb_bulk and I've tried every single file I found with that name and nothing changes, well, the device name from unknown to com1, com2... up to com13 I have seen.... Other thing is that I can't enter the fastboot mode or recovery mode neither. I wish I had an oppo service near home but I live in Uk, now I'm trying to get service from oppostyle and waiting for an answer. To be honest with you, I'm really annoyed with all this, never had a problem with bricked androids or iphones until I met this "guy" lol
Cheers
Pedro

I'm really sorry dude I hope I can help you as I did for mine it was quit simple with the same driver problems,so try to uninstall all drivers you have for oppo and install the one I shared with you taken from my ohone directly that the only way you can give any commands to your phone to switch to fastboot mode even if the problem still present

when I try to install the driver on my win10 laptop it says this...

Using an old win7 laptop I managed to install the bloody Qhsub driver and now the phone appears in the com ports under the name Qualcomm HS-USB QDLoader 9008 (COM4) does this means the phone really doesn't exist?

Update to this thread, I can't do anything until I find a proper driver for the phone which actually is recognised by my laptop as Qhsub_bulk and I can't bloody find this anywhere at least for making 6795 processors or specifically for this model...
Any clue?

peterpanda1970 said:
Update to this thread, I can't do anything until I find a proper driver for the phone which actually is recognised by my laptop as Qhsub_bulk and I can't bloody find this anywhere at least for making 6795 processors or specifically for this model...
Any clue?
Click to expand...
Click to collapse
No need panic ))) I've sent you a set for recovery your device )))) Good luck

ed_mobstyle said:
No need panic ))) I've sent you a set for recovery your device )))) Good luck
Click to expand...
Click to collapse
Hi mate, thanks for your help. Tried to open the link you sent me but it says it's not available anymore grgrgr
Cheers
Pedro

peterpanda1970 said:
Hi mate, thanks for your help. Tried to open the link you sent me but it says it's not available anymore grgrgr
Cheers
Pedro
Click to expand...
Click to collapse
Hi, please check now

Help me please , phone corrupted after 5 months from installing custom ROM LOLIPOP

Hello all , i've installed Custom ROM LOLIPOP according to tutorial on this forum , but after 5 months i woke up and found my phone all service has been stopped , i've restarted the phone , but the phone was stuck at Sony logo , and nothing happens , i've tried to flash the ROM files again but i got message ' Ooops , You did it again ' , i went to someone that work on mobile phone development , and he told me that the RAM has been corrupted , but i'm not sure of what he said , i can open recovery mode , but i can't do anything , please help me , i've tried to connect phone to PC by Emma Sony program , it recognized the phone model and serial number but it told me message that mobile is locked , please help me

[email protected] said:
Hello all , i've installed Custom ROM LOLIPOP according to tutorial on this forum , but after 5 months i woke up and found my phone all service has been stopped , i've restarted the phone , but the phone was stuck at Sony logo , and nothing happens , i've tried to flash the ROM files again but i got message ' Ooops , You did it again ' , i went to someone that work on mobile phone development , and he told me that the RAM has been corrupted , but i'm not sure of what he said , i can open recovery mode , but i can't do anything , please help me , i've tried to connect phone to PC by Emma Sony program , it recognized the phone model and serial number but it told me message that mobile is locked , please help me
Click to expand...
Click to collapse
Since you can reach recovery mode,
Try flashing the rom I released few days ago in the development section.
Press thanks if I helped you
Sent from my C2305 using Tapatalk

abhishekr700 said:
Since you can reach recovery mode,
Try flashing the rom I released few days ago in the development section.
Press thanks if I helped you
Sent from my C2305 using Tapatalk
Click to expand...
Click to collapse
Dear , i appreciate your help, i have flashed your wonderful ROM, but it stops at 45% Extract:/system/lib/libicui18n.so , i've waited about 30 mins but nothing happens , i've tried it again and the same situation happened.
I just want to tell you that when checking system info menu item i got that system size used and free : -1 MB and internal size the same : -1 MB , Would it help ?
Thanks in advance.

[email protected] said:
Dear , i appreciate your help, i have flashed your wonderful ROM, but it stops at 45% Extract:/system/lib/libicui18n.so , i've waited about 30 mins but nothing happens , i've tried it again and the same situation happened.
I just want to tell you that when checking system info menu item i got that system size used and free : -1 MB and internal size the same : -1 MB , Would it help ?
Thanks in advance.
Click to expand...
Click to collapse
First of all to say thanks,you can press the thanks button on his/her post,it helps keeping xda clean and on track.
Now as for your problem what I think is that your system partition memory has corrupted,
Recovery is stored on separate partition so you are still able to access it.
Elsewhere your motherboard and all is intact cause you can run the rom installer and execute commands to.
I strongly recommend getting your phone to a service centre for help,
Noone here(I guess) can help you deal with hardware issues.
One more thing, have you tried restoring your system via wmshua flash tool,
You can find its tutorial easily in the forum. Try it before spending money
Press the thanks button if I helped you.
Sent from my C2305 using Tapatalk

Guide : How to fix Software issues or Red light of death of Xperia C2305 / CS39H

So first off all what is red light of death It a hard brick state of Xperia C2305/CS39H and it is mostly caused when you are installing a cwm recovery and that won’t match the S1 boot version of your device. Also it is caused by software update not properly installed some errors or incorrect rom flashing not suitable for your device. So before starting to the repairing process read the notes.
Notes :
1. This is official way to recover the device so the warranty will not be voild.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.. You can use this process for any Xperia device having software issues ,hard brick , soft brick or bootloops any errors can be fixed by this.
3. In this process your stock android will be reinstall and all your data will be wiped so before starting. Take a backup from dr fone brick data repair download link is attached below you can download it and I will soon make a tutorial how to use it.
4. It is a stock rom so if you have unlocked bootloader it will not work you have to use unofficial flash tool to flash the rom.
5. If you face any issues during installation replay me below. Also read everything before starting.
6. You can proceed to the fix
So here how to fix it !!
Required :
1. Bricked Xperia C2305 or CS39H (softbrick , hardbrick ,any software issue, bootloops)
2. Windows PC or Mac but this procedure is only for Windows PC
3. Good Usb cable or Original cable best
4. Charger 800 mah or more. best way use original charger
5. Xperia Companion installed ( download link below windows only)
6. Xperia C2305/ CS39H USB drivers installed( download link below)
7. Proper high speed internet ( 800 kbps or more best 2 mbhs)
8. Time aprox 4hrs or more up to your internet speed
NOTE : BEFORE STARTING THIS OPEN THE BACK COVER OF THE DEVICE AND TAKE SOMETHING POINTED AND PRESS THE RESET
BUTTON WHEN YOU ARE CONNECTED TO THE PC WITH GREEN LED SHOWING THIS WILL WIPE THE THIRD PARTY CWM OR ANY RECOVERY ON YOUR DEVICE. IF YOU DONT THE UNSUPPORTED RECOVERY WILL BLOCK THE INSTALLION PROCESS. ONCE DONE FOLLOW THE STEPS.
So here the steps :
STEP ONE : See wheater your device is charged 80 % or not it is necessary because when you are in download mode alot of battery is consumed . Battery will not charge directly because device is non stop getting in download mode while charging consuming all the battery what is charged so how to charge battery First see the above notification led is off or on it is beside the front facing camera if its is on then the device is on off it by holding power button for 15sec once led is off insert usb and charge it again the above red led will on again off it by holding power button for 15sec Note disconnect the charging usb from device before pressing power button. Repeat this for 1 or 2 hr. Once done go to next step.
STEP TWO : First install Xperia C2305 / CS39H USB driver and then download Xperia Companion on your PC and open it then hit software repair chose smartphone and the hit click here. Once done it will download the drivers. Once done go to step three.
STEP THREE : hold power button for 15 sec then leave power button and hold vol- and insert the usb abd connect to pc don’t leave it until Xperia Companion detect it and leave the vol- and press next i agree all then it will download the OS of your device. NOTE : KEEP IN MIND OS SIZE IS APROXIMATELY 700 MB SO DATA CHARGES MAY APPLY I AM NOT RESPONBLE IF YOU HAVE TO PAY MORE FOR DATA PROCEED AT YOUR OWN RISK . Once done go to step four.
STEP FOUR: Disconnect the Usb and the start the device. First time will take 15 min or more to boot then select language and all the step up you are done.
CREDITS :
Me ( for explaining how to do this)
Sony Mobile Communication ( for making Xperia Companion)
Wonder share ( for making dr fone )
HIT THANKS IF THAT WORKS AND COMMENT BELOW IF YOU HAVE ANY PROBLEM IN ANY PROCESS. I WILL HELP YOU ASASP.
Download links :
Xperia Companion :
http://www-support-downloads.sonymob...aCompanion.exe
Xperia C2305 / CS39H USB Drivers :
https://developer.sonymobile.com/downloads/drivers/xperia-c-driver/
Dr fone offical download page :
https://www.google.co.in/url?sa=t&so...ZVGc8N9D8wOZ-Q
THANK YOU FOR READING

What is the reason for sudden death ?
I never roooted or installed roms to my phone and it suddenly died ! No boot or recovery ! why ? Is there something wrong with sony's software ?My phone is xperia c2305 ... I took it to service center three times and after a few week from repairing it,it always dies again ? So if install a custom rom ,will the problem be gone ?I also want to know how to install the drivers ... I downloaded it but I don't know what to do with it.

Khalid Zaki said:
I never roooted or installed roms to my phone and it suddenly died ! No boot or recovery ! why ? Is there something wrong with sony's software ?My phone is xperia c2305 ... I took it to service center three times and after a few week from repairing it,it always dies again ? So if install a custom rom ,will the problem be gone ?I also want to know how to install the drivers ... I downloaded it but I don't know what to do with it.
Click to expand...
Click to collapse
This is because your mother board has some issues if you have ever hard ware damage this is not new thing. Installing custom rom is not different then using stock the custom rom for xperia c are just stock themed so better dont install but sometimes it might able to slove the issue try installing custom rom. And the thing how to install drivers on yout windows pc charge the battery as shown in my guide then connect the usb to pc the go to control panel you will see the device as unidentified device click on it then search for driver on internet it will surely fail to find the hit browse then select the un zip driver file and select the driver it will install it you are done hit thanks if it works best wishes.

Khalid Zaki said:
I never roooted or installed roms to my phone and it suddenly died ! No boot or recovery ! why ? Is there something wrong with sony's software ?My phone is xperia c2305 ... I took it to service center three times and after a few week from repairing it,it always dies again ? So if install a custom rom ,will the problem be gone ?I also want to know how to install the drivers ... I downloaded it but I don't know what to do with it.
Click to expand...
Click to collapse
There might be some problem with your Phone's hardware. If it's still under warranty, maybe the company can replace your device but at least they can try to repair it for free.

I did what the topic said but xperia companion gives me an error .. please heeeelp !!

Maxx_Yamano said:
For using Xperia companion without error you need a fast internet connection or else it will show UE installation failed it needs faster internet so its not fault of guide as I my self repair my Xperia C from Hard Brick.
Click to expand...
Click to collapse
I have a download rate reaches to 250 KB/s

Maxx_Yamano said:
Lol its too slow mine is 6 mb per sec speed
---------- Post added at 09:15 AM ---------- Previous post was at 09:13 AM ----------
Lol its too slow mine is 6 mb per sec speed which windows you are using also how much bits ? Tell me I will help you in troubleshooting also can u add the screen shot showing error
Click to expand...
Click to collapse
I am using windows 10 (32 bit)
Screenshot for the error ..

Maxx_Yamano said:
Lol its too slow mine is 6 mb per sec speed
---------- Post added at 09:15 AM ---------- Previous post was at 09:13 AM ----------
Lol its too slow mine is 6 mb per sec speed which windows you are using also how much bits ? Tell me I will help you in troubleshooting also can u add the screen shot showing error
Click to expand...
Click to collapse
Maxx_Yamano said:
Xperia Companion can't connect to server please uninstall it and download from my thread https://forum.xda-developers.com/so...fix-software-issues-red-t3578944/post72438460
Click to expand...
Click to collapse
okey , i will try

Maxx_Yamano said:
Xperia Companion can't connect to server please uninstall it and download from my thread https://forum.xda-developers.com/so...fix-software-issues-red-t3578944/post72438460
Click to expand...
Click to collapse
I tried twice but the download reaches to 1/3 of the bar then gives me the same error .

Maxx_Yamano said:
Xperia Companion can't connect to server please uninstall it and download from my thread https://forum.xda-developers.com/so...fix-software-issues-red-t3578944/post72438460
Click to expand...
Click to collapse
I tried twice but it reaches to the 1/3 of the bar then gives me the same error ..

Maxx_Yamano said:
Hey mody3bdo sorry for not answering you I was busy in making my ROM for XPERIA C now I am free I can help you out but for that I need to ask you some questions answer me ASAP so I could assist you
Q.
- Which PC you have ?
- Is your device C2305 ?
- Have you installed ADB drivers of your device ?
- Where it goes 1/3 does it started to download the OS means does it showed you to connect your device or you haven't yet installed just installzing ?? (This is very imp )
- Does your device Hard brick or Soft brick
---- ALSO YOU CAN CHECK UPDATED VERSION OF THIS GUIDE
OVER HERE https://forum.xda-developers.com/sony-xperia-c/help/how-to-fix-dead-xperia-device-reinstall-t3612413 ----
HIT THANKS TO SUPPORT ME & MY WORK ALSO DONT FORGOT TO COMMENT BELOW
Click to expand...
Click to collapse
-My pc ia an hp laptop and i tried to use xperia companion on my desktop pc but the same problem
-yup my device is c2305
-I couldn't install adb drivers as nothing appear in the device manager
- yup it starts to download the os after (initializing) and connecting my device
- i think its a soft break as it just gave me an error while booting (Encryption unsuccessful) So I booted into recovery and selected (WIPE DATA/FACTORY RESET) , So I got into a bootloop , it just stuck on SONY logo .. So I am trying to repaire it to face that error (UEupdatefailed UE2005)
Thanks for helping
Sent from my SM-G530H using XDA Labs

Maxx_Yamano said:
Hey bro don't worry there is a will there is a way remove the back cover of your xperia take some pin or pointed object then hit the rest button wait for some time if your device gets on you are ready if you have got your device stuck due to wipe data factory reset then its not a brick you are stuck on boot logo so might Wmshua works if you have ever flash it using it or else it useless try pressing reset switch back might help you
DON'T FORGOT TO HIT THANKS IF YOU LIKE ME POST THAT WILL HELP ME
Click to expand...
Click to collapse
I tried with a pen but i face a problem with wmshua (flash failed undefinied )
Sent from my SM-G530H using XDA Labs

Maxx_Yamano said:
Might be a hardware damage I would recommend to go to service shop they will flash it will take 250-500 ₹
Click to expand...
Click to collapse
Okey thanks man but is there any other method to try ? As the shops in here dont work on xperia c ?
Sent from my SM-G530H using XDA Labs

Sony c encryption unsuccessful
I use this guide and problem not solved
Any solve please?

Maxx_Yamano said:
Hello guys this guide is out dated ... If you wish to try it then just go to my guide over here : https://forum.xda-developers.com/so...fix-software-issues-red-t3578944/post72438460
HIT THANKS TO SUPPORT ME & MY WORK ALSO DONT FORGOT TO COMMENT BELOW
---------- Post added at 01:30 PM ---------- Previous post was at 01:23 PM ----------
Hey mody3bdo sorry for not answering you I was busy in making my ROM for XPERIA C now I am free I can help you out but for that I need to ask you some questions answer me ASAP so I could assist you
Q.
- Which PC you have ?
- Is your device C2305 ?
- Have you installed ADB drivers of your device ?
- Where it goes 1/3 does it started to download the OS means does it showed you to connect your device or you haven't yet installed just installzing ?? (This is very imp )
- Does your device Hard brick or Soft brick
---- ALSO YOU CAN CHECK UPDATED VERSION OF THIS GUIDE
OVER HERE https://forum.xda-developers.com/sony-xperia-c/help/how-to-fix-dead-xperia-device-reinstall-t3612413 ----
HIT THANKS TO SUPPORT ME & MY WORK ALSO DONT FORGOT TO COMMENT BELOW
Click to expand...
Click to collapse
hi, im in this same situation but after reading the replies i discovered I'm installing drivers not the proper way, thanks in somewhere in page 2. will try my luck again later today, I'm using win 7 32bit if that matters. also is there any other way to charge my device internal battery? I'm suspecting it's battery is almost depleted. coz everytime i connect my phone to usb, it shows unknown device with a steady red light indicates it recognize the device in my pc. but disappears around 10secs maybe as soon the led light starts blinking. if i charge the device in doesnt show any charging animation or led it just turn on by itself on sony logo then reboot on endless loop when charging on a wall charger

xperia companion give error
UEGetPhoneInfoMissungInfo this error msg is given by xperia companion

is there a guide for Xperia C3 Dual D2502?