Database Info

[Q] Nexus S Root-Windows requests 'Android 1.0' hardware driver (and other weirdness)

Team XDA Developers,
It's been a long frustrating evening and I write to you in a desperate plea for help. First off--YOU ARE ALL GENIUSES. That being said let my scrubby noobermcnooberstein train of thought commence.
Found a lot of help from 'drexman8244' on the Nexus S 'fastboot help?' thread and although I've made it decently far... I've hit a wall that I cannot overcome.
First--the specs. Running Windows XP SP3 32-bit. The phone is a Samsung GT-i9020 (aka Nexus S).
Second--I've successfully installed the Java SDK, the Android SDK, downloaded USB drivers from Google, downloaded/installed a copy of ADB into the '/SDK/tools' directory, configured the PATH value in the Windows System Environment variables in Control Panel 'System', and basically set things up to rock and roll.
Third--I turn on my Nexus S, enable USB debugging, and attach the device to the workstation. The system detects the device and produces the following output (which appears to install the Android ADB driver and successfully establish a connection to Nexus S). Verified this step by entering 'adb devices' in a command prompt. Working great!
Fourth--In the command prompt I enter 'adb reboot bootloader'. The device reboots... but here's where things get strange. The device enters Fastboot (bootloader) mode and the Windows workstation request an additional 'Android 1.0' hardware device driver to continue. (I've searched far and wide and can't seem to find something that resembles this driver)
Fifth--Regardless of my efforts to direct the Hardware Installation Wizard to the 'C:\Program Files\Android\android-sdk-windows\google-usb_driver' location on my workstation... it just doesn't seem to accept that as a valid driver for the device in Fastboot (bootloader) mode. Blows my mind.
Sixth--??? What steps do you fellas think I should take next?! I've obviously tried uninstalling the device from the workstation, rebooting the Nexus S and the workstation, attempting to install the ADB driver before attaching the device and rebooting into Fastboot. Nothing I've tried seems to work.
Any input is especially appreciated and I hope that there's nothing left out. Warm regards--
The Kid
Edit: Posted an album on the Imgur account in case anyone wants to look at screenshots of the steps provided.

Hey man what you need to do is this.....I had the same problem with drivers. Once I figured that out things ran smooth.
PDAnet drivers
http://forum.xda-developers.com/showthread.php?p=9861928#post9861928

webplus said:
Hey man what you need to do is this.....I had the same problem with drivers. Once I figured that out things ran smooth.
PDAnet drivers
http://forum.xda-developers.com/showthread.php?p=9861928#post9861928
Click to expand...
Click to collapse
You're a scholar and a gentleman--and absolutely right.
Looks like the default drivers from Google are borked. Downloaded the ones from PdaNet and things went smooth like butter. Thanks for making my day!!

haha no problem took me 6 hours of trying everything to figure out what I was doing wrong. Glad everything worked. If not for these forums and some great minds on these boards many of us would still be sporting a locked phone......so KUDOS to them!

bluetrevian said:
Team XDA Developers,
It's been a long frustrating evening and I write to you in a desperate plea for help. First off--YOU ARE ALL GENIUSES. That being said let my scrubby noobermcnooberstein train of thought commence.
Found a lot of help from 'drexman8244' on the Nexus S 'fastboot help?' thread and although I've made it decently far... I've hit a wall that I cannot overcome.
First--the specs. Running Windows XP SP3 32-bit. The phone is a Samsung GT-i9020 (aka Nexus S).
Second--I've successfully installed the Java SDK, the Android SDK, downloaded USB drivers from Google, downloaded/installed a copy of ADB into the '/SDK/tools' directory, configured the PATH value in the Windows System Environment variables in Control Panel 'System', and basically set things up to rock and roll.
Third--I turn on my Nexus S, enable USB debugging, and attach the device to the workstation. The system detects the device and produces the following output (which appears to install the Android ADB driver and successfully establish a connection to Nexus S). Verified this step by entering 'adb devices' in a command prompt. Working great!
Fourth--In the command prompt I enter 'adb reboot bootloader'. The device reboots... but here's where things get strange. The device enters Fastboot (bootloader) mode and the Windows workstation request an additional 'Android 1.0' hardware device driver to continue. (I've searched far and wide and can't seem to find something that resembles this driver)
Fifth--Regardless of my efforts to direct the Hardware Installation Wizard to the 'C:\Program Files\Android\android-sdk-windows\google-usb_driver' location on my workstation... it just doesn't seem to accept that as a valid driver for the device in Fastboot (bootloader) mode. Blows my mind.
Sixth--??? What steps do you fellas think I should take next?! I've obviously tried uninstalling the device from the workstation, rebooting the Nexus S and the workstation, attempting to install the ADB driver before attaching the device and rebooting into Fastboot. Nothing I've tried seems to work.
Any input is especially appreciated and I hope that there's nothing left out. Warm regards--
The Kid
Edit: Posted an album on the Imgur account in case anyone wants to look at screenshots of the steps provided.
Click to expand...
Click to collapse
as far as the USB driver and such, dont point it directly at the USB-driver folder point it at the SDK folder and then click the box that searches the sub folders

The drivers from Google aren't borked. You install one driver - the "normal" Android USB interface - for when the phone is plugged in and fully booted, and another - the "Fastboot" interface - for when the phone is plugged in but in recovery. For the latter, you have to pick the driver manually and do a force install, as Windows won't recognize the device.
Both drivers are available in the usb-drivers directory in the Android SDK directory, provided you loaded the SDK manager and downloaded the USB drivers.

jimmypopulous said:
The drivers from Google aren't borked. You install one driver - the "normal" Android USB interface - for when the phone is plugged in and fully booted, and another - the "Fastboot" interface - for when the phone is plugged in but in recovery. For the latter, you have to pick the driver manually and do a force install, as Windows won't recognize the device.
Both drivers are available in the usb-drivers directory in the Android SDK directory, provided you loaded the SDK manager and downloaded the USB drivers.
Click to expand...
Click to collapse
This is correct. Oddly, I had no problems searching with the driver with the wizard on my win7 x64 pc, but had to manually point it for the fastboot relevant driver on my laptop, running the same OS.
Basically, as jimmypopulous says, you need to manually select the usb driver when you're in fastboot, according to my experience.

I hear what folks are saying about the Google USB drivers working fine for most installs.
That being said... No matter how many times I manually provided the path to the Google Fastboot driver location the OS refused to accept them as valid. (Seems like there are others that experienced this problem from a quick glance at the forums.)
In either case it seems as though the alternative drivers resolved the problem and I appreciate all the feedback that was given!
The Kid

I had the same issue - my Nexus One always worked fine on my laptop but even after updating the SDK & drivers I couldn't get fastboot to work with my Nexus S.
ADB worked fine but my laptop didn't recognise my phone properly via fastboot.
After installing PDANet, fastboot works as well now - thanks very much for your help, my NS is now rooted!

Hi,
This is my first post so bear with me and let me know if I'm outta line in any way.
I'm trying to root my nexus s and I am running XP. I can get ADB devices to work but when it comes to fastboot my device is not recognised. I have been trying for a couple of days and still cannot get it to work! I have installed PDAnet and and tried force installing the drivers but I can' get them to install. When I click install driver from a list and browse to the drivers it says that the specified location does not have information about your hardware. Is there something I am doing wrong here? Is there another way I can force install the driver?
Also I am a MASSIVE NOOB so please try and be specific when giving me directions.
Thank you XDA Overlords!

Uninstall all references to the drivers. your phone should show up with a bang once done properly.
Then follow the excellent guides here to root your phone properly
Sent from my Nexus S

Also make sure you have the phone connected and in fastboot mode when you install PDAnet.
Sent from my Nexus S using XDA App

Adding these 2 lines in the android_winusb.inf file from the google "usb_driver" folder helped me.
;Nexus S
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_4E20&REV_0100
Click to expand...
Click to collapse
Detailed:
If your PC displays "Android 1.0" in Device Manager (when you try to connect the phone through fastboot), then go to Android 1.0, Properties, Details tab. Select Hardware ids.
USB\VID_18D1&PID_4E20&REV_0100 This part should be exactly the same with the one you add in "android_winusb.inf"

When you say uninstall all references what do you mean? Again, I am a massive noob. Do you mean uninstall the device with USBDeview from all the previous times I have tried installing it? I've tried that multiple times and still can't get it to work

matt2053 said:
Also make sure you have the phone connected and in fastboot mode when you install PDAnet.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
When I try install PDAnet with the ns in fast boot mode the installer says please connect your phone to complete the installation. Is there another way to install it where this won't happen?

lambda30 said:
Adding these 2 lines in the android_winusb.inf file from the google "usb_driver" folder helped me
Detailed:
If your PC displays "Android 1.0" in Device Manager (when you try to connect the phone through fastboot), then go to Android 1.0, Properties, Details tab. Select Hardware ids.
USB\VID_18D1&PID_4E20&REV_0100 This part should be exactly the same with the one you add in "android_winusb.inf"
Click to expand...
Click to collapse
In fastboot the ns just comes up as unknown device with hardware id of USB\UNKNOWN.
I tried just entering that id into the .inf file but that didn't help.
Anyone got any other ideas?
Thank you for these ideas I'm not gonna give up yet!

thejug02 said:
When I try install PDAnet with the ns in fast boot mode the installer says please connect your phone to complete the installation. Is there another way to install it where this won't happen?
Click to expand...
Click to collapse
Maybe the installer has changed since I did it.
Try running PDA install, put phone in fastboot, then plug in when prompted.
Sent from my Nexus S using XDA App

matt2053 said:
Maybe the installer has changed since I did it.
Try running PDA install, put phone in fastboot, then plug in when prompted.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Yea maybe it did change. When I run the installer it stops and requests that you connect the device and put it in debugging mode. When you connect the ns in fastboot it doesn't read it as the ns so just continues to ask you to connect the ns.
Thanks for the idea though! Keepem coming people!

I just uninstalled the drivers from my laptop and installed again using PDAnet method. It worked without a problem.
The only other thing I can think of is to boot phone and make sure USB Debugging is checked and try again.
Sent from my Nexus S using XDA App

lambda30 said:
Adding these 2 lines in the android_winusb.inf file from the google "usb_driver" folder helped me.
Detailed:
If your PC displays "Android 1.0" in Device Manager (when you try to connect the phone through fastboot), then go to Android 1.0, Properties, Details tab. Select Hardware ids.
USB\VID_18D1&PID_4E20&REV_0100 This part should be exactly the same with the one you add in "android_winusb.inf"
Click to expand...
Click to collapse
It helped me too! It must be added under the [Google.NTx86] box

Link: USB Driver for T-Mobile SGH-t769 Samsung Galaxy S Blaze 4G

http://org.downloadcenter.samsung.c...113815/T-Mobile_T769_Blaze_4G_USB_Drivers.exe

22.8MB file installing slowly?
First off, I apologize for being paranoid. I downloaded this file and started installing it. It's a 22.8 MB .exe file. I started installing, and it *seems* to be working correctly. After clicking install MSS Installation Wizard is installing Samsung USB Driver for Mobile Phones V1.3.2200.0. Slightly after, desktop toolbar icon popped up Installing device driver software, opened it up showing:
USB Composite Device Ready to use
USB Mass Storage Ready to use
CDC Cerial Waiting for user input
Samsung LTE USB Device Ready to use
Samsung LTE Card USB Device Ready to use
It's been like 10-15 minutes and the MSS Installation Wizard is chugging along, at about 50%. Is this file legit? Is it just my slow ass computer that is making this install take forever? Have other successfully installed this for ADB usage?

Looks to just be the link to Samsung, which yes I have installed. It was a bit slow on my netbook.
Sent from my SGH-T769 using Tapatalk 2

Same here. I installed it yesterday while working on my wife's phone (Blaze also). The first time I tried to install it on my desktop it was slow and there was some sort of error. I had to reboot and redo it before I got it properly installed.

I've never needed the drivers, just downloaded kies.
Sent from my SGH-T769 using XDA

Kies I think installs the drivers for you. You can't properly use the device without the drivers and you definitely cannot use some of the tools without them.

No ADB
hi guys
I'm trying to getting ADB going on the T-Mobile BLAZE 4G (T769), but I don't seem to be able to have adb recognize the device.
I've installed the Samsung drivers (linked here) and it installs a bunch of devices.
But, adb devices returns nothing.
Any idea whether I've missed anything?
I'm not new to adb or Android (have done it on over 10 devices), but I just can't to get it going on the Blaze.
FYI, as part of unlocking the devices, I had to enter menus via 7284 and 9090 on the keypad and enable a bunch of usb diag/modem stuff. Could this have anything to do with it?
** UPDATE **
I just used *#7284# and changed back the USB->Modem to USB->PDA and now ADB works.

Does anyone know how to get this device working with adb on Debian? I can't for the life of me get the device recognized by adb. I have a 51-android.rules set up and all that jazz. udev sees it and rules are applied properly. I just can't get it recognized. It seems references to accessing this device from Linux are very few and far between. What gives?

Well in case anyone is interested I found the solution while searching elsewhere. It seems it's a permission problem. If I run a:
sudo adb kill-server
Then:
sudo adb start-server
The device is then recognized. Hope maybe this helps someone else.
Sent from a magical unicorn using CM10

strungoutfan78 said:
Well in case anyone is interested I found the solution while searching elsewhere. It seems it's a permission problem. If I run a:
sudo adb kill-server
Then:
sudo adb start-server
The device is then recognized. Hope maybe this helps someone else.
Sent from a magical unicorn using CM10
Click to expand...
Click to collapse
Can you explain this a bit more, like where to input these commands. Im a bit green and having this issue.
---------- Post added at 01:25 AM ---------- Previous post was at 01:04 AM ----------
theshowman said:
hi guys
I'm trying to getting ADB going on the T-Mobile BLAZE 4G (T769), but I don't seem to be able to have adb recognize the device.
I've installed the Samsung drivers (linked here) and it installs a bunch of devices.
But, adb devices returns nothing.
Any idea whether I've missed anything?
I'm not new to adb or Android (have done it on over 10 devices), but I just can't to get it going on the Blaze.
FYI, as part of unlocking the devices, I had to enter menus via 7284 and 9090 on the keypad and enable a bunch of usb diag/modem stuff. Could this have anything to do with it?
** UPDATE **
I just used *#7284# and changed back the USB->Modem to USB->PDA and now ADB works.
Click to expand...
Click to collapse
I tried the #7284# and #9090# and got "unable to process request"
any other suggestions?

[Q] adb doesn't recognize my phone

I posted this question over on Phandroids but this forum seems perhaps more appropriate. My Lenovo laptop running XP sees my phone just fine (Samsung Gravity Smart SGH-T589) and I'm able to transfer files to/from the phone. However, adb doesn't seem to be able to see it. A search about this problem turns up solution suggestions that mostly involve drivers, but my Samsung driver is up to date and clearly working (or else the phone wouldn't show up to Windows and I wouldn't be able to transfer files). My phone is rooted, which also makes it obvious that my laptop can talk to it just fine -- I used OneClick to root it last week using the same computer.
I'm using the DOS prompt (cmd) to run adb, and adb works fine. It simply doesn't see any devices. Here's an actual text transcript:
===============================
C:\Android\adt\sdk\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
C:\Android\adt\sdk\platform-tools>adb shell
error: device not found
C:\Android\adt\sdk\platform-tools>
===============================
Any ideas? I'm pretty new to this, so perhaps I'm missing something really simple. I hope so anyway!
--
Craig
Sunnyvale, California

Make sure that USB debuggin is enabled on your device. (This option should be changed only while device is disconnected from USB).
Also, try to restart adb server by killing it from the device manager.

Thanks for the suggestions. I had indeed already done both of those things. USB debug must be enabled to do file transfers, so I already knew it was definitely on. I still cycled it off/on anyway to make sure. And I did both kill-server and start-server commands as part of my checkout to assure myself that adb was in fact working correctly. I had Windows task manager up as well so I could watch adb disappear and reappear with those commands.
--
Craig
Sunnyvale, California

Hmmm... Try to reboot both your computer and device.
Have you tried to connect other devices to ADB? May be there is a problem with ADB installation?

Phone and laptop have both been rebooted many times. I also tried it with the phone in charge-only mode because that's what One Click Root required, but nothing changed. I also tried using all of the different USB ports on my laptop and tried two different USB cables, although that was silly because the phone is obviously talking to the laptop via USB. It shows up in file explorer, and I am able to transfer files using Windows drag and drop.
I'm afraid I have only one device, my recently rooted Samsung Gravity Smart phone, so I can't try it out on anything else.
I'm not sure how the adb installation could be at fault since the commands work as long as they don't involve the USB port. And I know that it MUST be possible to shell to the phone with what's already on this computer because One Click did it. I tried running the adb commands from the One Click Root > ADB directory just in case something about that particular install of adb was different, but I got exactly the same result.
It seems to me that I must be failing to do some setup step that an experienced Android developer might know about. I've never done anything like this before, so I wouldn't have even known about downloading the Android sdk if it weren't for forums like this! I sure appreciate the community of knowledgeable people here, who are clearly willing to help newbies like me.
If there are any software tools that anyone can suggest using to help me figure out what's going on, please let me know.
EDIT: Is there something that I need to load on my phone before adb will work? It occurs to me that OneClick might push something to the phone when it does the root, then delete it when the task is complete. I tried using QTadb, which is an adb GUI, and got the same result: no devices seen on the port even though Windows sees my phone and can talk to it via USB.
--
Craig
Sunnyvale, California

[Q] Too dumb to even get drivers!?!

Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E

ericdg said:
Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E
Click to expand...
Click to collapse
ADBSetup will get you the drivers you are looking for:
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
Worked for any Android phone I tried.

Thanks, I'll give that a shot and see what happens!

Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E

ericdg said:
Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E
Click to expand...
Click to collapse
Easiest way to tell is open up a command prompt in the folder that adbsetup installed to (C:\ADB I think) and type:
Code:
adb devices
If all is well, then the device will be part of the listing.

Thanks Joel.............I think it worked.
The ADB command came back with:
List of devices attached
HT22_______7 device
That's not a number that I've ever seen associated with my phone, but I assume that's it.
Confirmed.................I was able to reboot the phone by ADB!

Excellent! This will also mean the fastboot commands needed to unlock your bootloader will work too.

.........one would think so, Joel, but I can't get fastboot to do anything. ADB recognizes the phone, and will reboot into bootlocker, but once there it'll do nothing. Windows pops up a message shortly after bootlocker opens that says something to the effect of "there was a problem with USB device not recognized". I tried the command "fastboot devices", but got nothing. I know that I'm darned close, and it's probably something simple, but just can't get it to work. Maybe I need additional drivers for fastboot, or need to move it to another directory?
Thanks,
~E

Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.

joel.maxuel said:
Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.
Click to expand...
Click to collapse
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E

ericdg said:
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E
Click to expand...
Click to collapse
Dont know where you got your HTC drivers, but you should try the ones in this post (step one - hopefully its still live - if not I can dropbox it for you):
http://forum.xda-developers.com/showthread.php?t=1801106
Sent from my LG-D520 using XDA Free mobile app

You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.

ericdg said:
You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.
Click to expand...
Click to collapse
Uh-oh. Either the link was dead when I went through this process back in April, or I had bad organizing skills at one point and didn't put the file in the Doubleshot folder before completing a purge. Either way, I don;t have the file.
Nor did I really need it. The second Doubleshot I rooted I ended up using it in my native Linux environment (no drivers needed), vs my Windows XP emulated through VirtualBox. That's what you could do. Get a live Debian DVD (Im like the XFCE desktop version), boot in, get fastboot:
Code:
sudo apt-get install fastboot
And then use fastboot:
Code:
sudo fastboot ...

Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E

ericdg said:
Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E
Click to expand...
Click to collapse
Just need the one. My recommended file to download is this:
http://cdimage.debian.org/debian-cd...ybrid/debian-live-7.6.0-i386-xfce-desktop.iso
Burn the image (not the file) onto a DVD (can be a rewritable) and reboot with the disc in the drive. Once it's fully loaded, you can either enter commands by clicking on the "terminal" icon on the bottom of the screen (preferred), or press Ctrl + Alt + F1 to get a prompt (may have to log in as "user", there shouldn't be a password). Hope this helps.

Question Can't connect Pixel 7 Pro to PC (Windows 11) [SOLVED]

The mystery: I cannot establish a USB connection between my Pixel 7 Pro (Android 13) and PC (Windows 11). When I try, the PC makes that characteristic "connected device" sound, but Windows Explorer doesn't discover the Pixel, nothing shows up anywhere in the Windows Device Manager, and the ADB command
.\fastboot device
returns nothing. The Pixel is similarly not discoverable as a bluetooth device to the PC, although it IS to other devices (like my earbuds).
This is the first task I have attempted since I performed a factory reset (and walked through the automated Pixel setup process) last night. I have spent the last three and a half hours reading Android forums, testing USB port-cable permutations, and installing and uninstalling drivers. There is no obvious solution to this problem within the first ten pages of Google search results. I would be beyond grateful for any possible insight, but please, take a moment to review what I have attempted already before you expend any effort helping me troubleshoot.
The Pixel CAN connect to an older laptop running Windows 10, appearing both in the Windows Device Manager (which says my drivers are up to date) and in File Explorer (where I can access the internal memory). But ADB similarly returns nothing on the ADB
.\fastboot devices
command. Also, my old phone (a Samsung Galaxy S20 FE 5G running Android 13) connects fine--both by USB and by bluetooth--to all three devices.
So the PC (Windows 11) connects to the Galaxy and the laptop (Windows 10) connects to the Pixel (kinda), which fairly well eliminates the possibility of an issue related to my hardware or USB cables. But the PC (Windows 11) won't connect to the Pixel--not anymore. Everything worked just fine when I unlocked the Pixel's bootloader a few weeks ago.
What I need now is to recover the functionality of the USB and bluetooth connectivities between the Pixel and the PC running Windows 11, especially for file transfers. For several reasons, WiFi reliant solutions are untenable for my situation. I also need to re-lock the bootloader by any method (not necessarily with the PC). As mentioned above, ADB has not succeeded in finding the device on either platform.
Finally, in case it's relevant: when I open the Pixel's USB Preferences menu, I cannot switch from "USB controlled by...This device" to "USB controlled by...Connected device"--in both cases, the Pixel returns a "couldn't switch" dialogue. And yes, I have of course enabled USB debugging.
If you took the time to comb through all those particulars, Thank you. I'm getting desperate for some thoughtful expertise, and while I'm open to retrying anything for the fifth or sixth time, (maybe I somehow missed the magic driver package), it is a special kind of tribulation to review the same tired list of perfunctory solutions to a different problem. I promise, the solution I need isn't one of the usual suspects.
I spent $800 on this device. That's a lot of money for me. It feels absurd and unfair that such a basic functionality--one that far more affordable devices have been delivering reliability for decades--should be missing from the Pixel 7 Pro. Please please please help me!

Ummm, USB debugging is not only what is needed here. While you are in developer settings scroll down to "Default USB configuration" and tap on it directly. Then you will see a number of choices. I think the top one titled "File transfer / Android Auto" is the one you need. Or maybe try PTP???
Let us know if this helps.

jaseman said:
Ummm, USB debugging is not only what is needed here. While you are in developer settings scroll down to "Default USB configuration" and tap on it directly. Then you will see a number of choices. I think the top one titled "File transfer / Android Auto" is the one you need. Or maybe try PTP???
Let us know if this helps.
Click to expand...
Click to collapse
Thanks for your speedy reply! I had File transfer / android Auto selected, but then switching to P2P allowed me to review the internal storage! I can't believe it. However I still need to figure a way to get ADB to find the device so I can lock the bootloader, and i still can't figure out how to solve the Bluetooth connectivity..

GodieDan said:
Thanks for your speedy reply! I had File transfer / android Auto selected, but then switching to P2P allowed me to review the internal storage! I can't believe it. However I still need to figure a way to get ADB to find the device so I can lock the bootloader, and i still can't figure out how to solve the Bluetooth connectivity..
Click to expand...
Click to collapse
Have you tried putting in Fastboot mode and then connect to computer?

schmeggy929 said:
Have you tried putting in Fastboot mode and then connect to computer?
Click to expand...
Click to collapse
Putting what in fastboot mode?

GodieDan said:
Putting what in fastboot mode?
Click to expand...
Click to collapse
Your phone in Fastboot Mode aka bootloader Mode.

Uninstall any previous android USB driver you have installed, and install the official Google USB driver instead. You need to install it two times probably. First in Android mode and second in bootloader mode, after all that it should show up correctly. If not, check your cable and PC USB port
If possible, give a lsusb output on your PC, see if the phone's there or not

yurishouse said:
Uninstall any previous android USB driver you have installed, and install the official Google USB driver instead. You need to install it two times probably. First in Android mode and second in bootloader mode, after all that it should show up correctly. If not, check your cable and PC USB port
If possible, give a lsusb output on your PC, see if the phone's there or not
Click to expand...
Click to collapse
I'm sorry, i don't understand what you mean when you say install it in android mode or bootloader mode?

Yeah, you probably just need to install the official USB driver from Google. That was a problem that numerous people had when the Pixel 7 series first released.

GodieDan said:
I'm sorry, i don't understand what you mean when you say install it in android mode or bootloader mode?
Click to expand...
Click to collapse
So you trying to unlock the Bootloader and you don't even know what Bootloader mode or Fastboot is? Maybe you should do some reading first. What do you mean by absurd that the Pixel doesn't have basic functionality? You said you have no problem with a Windows 10 computer, Windows 11 is the problem not the phone. Again I would do some reading on XDA, especially the guides on unlocking and rooting, because you don't seem to have a clue on what you are doing.

schmeggy929 said:
So you trying to unlock the Bootloader and you don't even know what Bootloader mode or Fastboot is? Maybe you should do some reading first. What do you mean by absurd that the Pixel doesn't have basic functionality? You said you have no problem with a Windows 10 computer, Windows 11 is the problem not the phone. Again I would do some reading on XDA, especially the guides on unlocking and rooting, because you don't seem to have a clue on what you are doing.
Click to expand...
Click to collapse
If you look at his second post (#3 of this thread) he says he wants to "lock" his bootloader not unlock it. Unless of course it was a typo. Maybe we should point him to the thread, Help I've bricked my device now what do I do".

yeah...the "absurdity" doesn't fall on the Google Pixel in this case, but with Microsoft Windows...
So, the first thing you need to do is see what is the device being identified as in Device Manager -- it easily could be "Unknown Device" or even identified as something totally different & wrong (Samsung android device, MTP device, etc.). Regardless, it NEEDS to be identified as Android Composite ADB Interface (and Android Bootloader Interface when in Bootloader Mode). When this was happening to many members in the main rooting thread on this forum, it was determined that you can't simply just "Uninstall" it, but you also need to "delete device driver" as well (if option is available)! Most users are able to simply install the driver and sometimes just have to point it to the Google USB Windows Driver folder (that I hope you followed the suggestions of the other members in this thread and got it proper from the source from Google's developer's website), but I suggest going beyond it and pointing the device driver (Update, Browse My computer for drivers, Let me pick from a list, have disk, and choose the .inf file) to the exact .inf file.
Also, since it seems you aren't too experienced in all this, I really do suggest you use the official Google Android Flash Tool to re-lock your bootloader! There are countless members from the past 7 years that have HARD BRICKED their device because they have done things wrong -- the Android Flash Tool will do everything automatedly in the correct fashion as to not hard brick your device when re-locking the bootloader.
But you absolutely need to get your usb drivers correct in order for the tool to work...

schmeggy929 said:
So you trying to unlock the Bootloader and you don't even know what Bootloader mode or Fastboot is? Maybe you should do some reading first. What do you mean by absurd that the Pixel doesn't have basic functionality? You said you have no problem with a Windows 10 computer, Windows 11 is the problem not the phone. Again I would do some reading on XDA, especially the guides on unlocking and rooting, because you don't seem to have a clue on what you are doing.
Click to expand...
Click to collapse

We'll I'm certainly not above learning new vocabulary but but in this case I don't think the issue is having read too little. Do you mean recovery mode? So far there is no custom recovery available for the Pixel 7 Pro, but yes I did try with the phone in the stock recovery

I have read every relevant article on XDA and three other forums and nothing has helped so far. I promise you I would not have posted if I could find the solution elsewhere.
Also the phone doesn't work fine on the windows 10 system. I was able to view my files but I couldn't read, write or execute ADB commands. I do consider USB file transfer to be a basic functionality, and windows 11 is backwards compatible with every storage device since punch cards.
Anyways I'm no pro, but I have had success with rooted devices in the past. For my benefit it would be helpful to be assiduous with language choice.

.

H
bobby janow said:
If you look at his second post (#3 of this thread) he says he wants to "lock" his bootloader not unlock it. Unless of course it was a typo. Maybe we should point him to the thread, Help I've bricked my device now what do I do".
Click to expand...
Click to collapse
I there, yes, my objectitve was to lock the bootloader, not unlock it. However I got that part figured out at least, by getting the phone replaced (i had fortunately splurged on the extra protection). But also I never bricked my device, and as best I can tell, the issue at hand isn't related to the rooting, or everything would be working again with the new phone. I wanted to re-lock the bootloader because everything was just getting to be so unstable. This was never a problem on my Nexus 6p, but that was two devices ago. Also, is it just me, or are there generally fewer benefits to rooting than there were in the teenies?

Hi there
simplepinoi177 said:
yeah...the "absurdity" doesn't fall on the Google Pixel in this case, but with Microsoft Windows...
So, the first thing you need to do is see what is the device being identified as in Device Manager -- it easily could be "Unknown Device" or even identified as something totally different & wrong (Samsung android device, MTP device, etc.). Regardless, it NEEDS to be identified as Android Composite ADB Interface (and Android Bootloader Interface when in Bootloader Mode). When this was happening to many members in the main rooting thread on this forum, it was determined that you can't simply just "Uninstall" it, but you also need to "delete device driver" as well (if option is available)! Most users are able to simply install the driver and sometimes just have to point it to the Google USB Windows Driver folder (that I hope you followed the suggestions of the other members in this thread and got it proper from the source from Google's developer's website), but I suggest going beyond it and pointing the device driver (Update, Browse My computer for drivers, Let me pick from a list, have disk, and choose the .inf file) to the exact .inf file.
Also, since it seems you aren't too experienced in all this, I really do suggest you use the official Google Android Flash Tool to re-lock your bootloader! There are countless members from the past 7 years that have HARD BRICKED their device because they have done things wrong -- the Android Flash Tool will do everything automatedly in the correct fashion as to not hard brick your device when re-locking the bootloader.
But you absolutely need to get your usb drivers correct in order for the tool to work...
Click to expand...
Click to collapse
Howdy, thanks for this. I just wrote a long reply but I can't seem to find it now, so I'll go ahead and give you the upshot again.
In my device manager, i have located a driver called "Android ADB Interface" under the grouping of "LeMobile Android Device" (by itself), and sure enough, it has a yellow-triangle warning icon. Before I take any action, i want to be clear -- your advice is that I uninstall the driver AND delete it manually? The context menu gives me the option to update the driver (when I search automatically, windows tells me the best drivers are already installed), disable device and uninstall device. Do you suggest I choose uninstall and then download the correct driver? If so, please would you provide me with the right link? I know from recent experience that there are a lot of drivers out there which look pretty good, and obviously none of them have worked doe me

GodieDan said:
Hi there
Howdy, thanks for this. I just wrote a long reply but I can't seem to find it now, so I'll go ahead and give you the upshot again.
In my device manager, i have located a driver called "Android ADB Interface" under the grouping of "LeMobile Android Device" (by itself), and sure enough, it has a yellow-triangle warning icon. Before I take any action, i want to be clear -- your advice is that I uninstall the driver AND delete it manually? The context menu gives me the option to update the driver (when I search automatically, windows tells me the best drivers are already installed), disable device and uninstall device. Do you suggest I choose uninstall and then download the correct driver? If so, please would you provide me with the right link? I know from recent experience that there are a lot of drivers out there which look pretty good, and obviously none of them have worked doe me
Click to expand...
Click to collapse
It might help to show what it states in the "Device status" in Properties.
But, regardless of what it says, YES uninstall the driver AND delete it manually. Windows automatically searching is usually wrong more often than not in my experience -- but especially in the case of special hardware connected to the computer.
Again, when reconnecting the device and after it installs the (most likely wrong) driver, please heed what I stated before:
simplepinoi177 said:
...Most users are able to simply install the driver and sometimes just have to point it to the Google USB Windows Driver folder (that I hope you followed the suggestions of the other members in this thread and got it proper from the source from Google's developer's website), but I suggest going beyond it and pointing the device driver (Update, Browse My computer for drivers, Let me pick from a list, have disk, and choose the .inf file) to the exact .inf file.
Also, since it seems you aren't too experienced in all this, I really do suggest you use the official Google Android Flash Tool to re-lock your bootloader! There are countless members from the past 7 years that have HARD BRICKED their device because they have done things wrong -- the Android Flash Tool will do everything automatedly in the correct fashion as to not hard brick your device when re-locking the bootloader.
But you absolutely need to get your usb drivers correct in order for the tool to work...
Click to expand...
Click to collapse
You are correct that there are multiple sources for the drivers and adb/fastboot -- ultimately the best place to get them is direct from Google's android developers website. For Windows USB drivers; here is the link from this website: https://developer.android.com/studio/run/win-usb
Just extract the .zip to a folder, and refer to that folder when doing the aforementioned steps I laid out (in orange)...
hope this helps...!

simplepinoi177 said:
It might help to show what it states in the "Device status" in Properties.
But, regardless of what it says, YES uninstall the driver AND delete it manually. Windows automatically searching is usually wrong more often than not in my experience -- but especially in the case of special hardware connected to the computer.
Again, when reconnecting the device and after it installs the (most likely wrong) driver, please heed what I stated before:
You are correct that there are multiple sources for the drivers and adb/fastboot -- ultimately the best place to get them is direct from Google's android developers website. For Windows USB drivers; here is the link from this website: https://developer.android.com/studio/run/win-usb
Just extract the .zip to a folder, and refer to that folder when doing the aforementioned steps I laid out (in orange)...
hope this helps...!
Click to expand...
Click to collapse
Wow, thank you for the speedy reply!
1. Having splurged on the protection plan, yesterday i went to best buy and replaced my device, and I'm no longer interested in messing with the bootloader. So where ADB is concerned, I don't need it. What i DO need is the functionality of making file transfers between my PC and my phone. Do you still suggest I look for the ADB driver on the developer website, or is there something more basic (and hopefully reliable)?
2. The device status reads:
"
The device cannot start. (Code 10)
The specified request is not a valid operation for the target device.
"
I spent a few minutes googling around about those errors, no luck yet.
3. It would be straightforward to uninstall (or disable) the device, but when I do, I worry it will be difficult to locate where the drivers are hiding (to delete manually). Under the "Driver" tab I clicked "Driver Details" and found the directories for three files, winusb.sys and two .dll files. Are these the culprits? Might there be others anywhere?