Database Info

Fastboot not working with windows 7 beta

I recently crashed my vista hard drive and decided to give windows 7 a try, its working wonders right now. The only problem is that I'm trying to put Nandroid back up on my computer again. I am at the step of trying to get the fastboot loader. It worked on Vista, but now it is saying that the "Driver is not intended for this platform." Is that due to windows 7? Is there a work around for this? Any help would be amazing, thanks.

I used Fastboot on Win7 7100 build yesterday, and it worked fine. Did you set everything up according to this post:
http://forum.xda-developers.com/showpost.php?p=3311708&postcount=2
This is all that I did, and everything worked flawlessly. Good luck.

hmm..yeah, i did do everything according to the tutorial exactly, do you have email, aim, gmail, etc? could you help me?

use the newest driver in this SDK..
http://developer.android.com/sdk/1.5_r1/index.html
If you dont see the ADB Device or whatever its called in the device manager you need to delete a generic volume and scan for hardware changes.... HTC talks about it here. I had to do it also...
http://www.htc.com/www/support/android/adp.html
Troubleshooting
fastboot.exe (on Windows) doesn't detect the ADP device properly
In some cases, Windows detects the ADP1 bootloader as a USB mass storage device, preventing fastboot.exe from accessing it. To resolve the issue, you can dissociate the USB Mass Storage driver from your ADP1 on your Windows machine and install the proper driver instead, as described in the steps below:
1. Boot the device into fastboot mode, as described above, and connect the device to your machine over USB.
2. Navigate to Start > Control Panel > System > Hardware > Device Manager > Universal Serial Bus Controllers. Observe that the ADP device is listed as a USB Mass Storage Device.
3. Right-click USB Mass Storage Device and select Uninstall. Windows then prompts you with a "New Hardware Found Wizard" message. If Windows doesn't prompt you, you can manually re-detect devices by selecting Action > Scan for hardware changes.
4. Install the USB driver included in the Android SDK, as described in Setting up a Device for Development on the Android Developers site.

thanks southsko, i'll try this and let you guys know how it works.

I tried your method Southsko, but it didnt work for me. I think the problem is that windows 7 refuses to install the driver for the htc dream, because its not "intended for this platform" is there a way to force it to install the driver? or manually install the driver?

When I wrote that tutorial it was using Windows 7 beta. I have also used it since I upgraded to Win7 RC, so I know that it can work. Did you make sure to install driver when the phone is connected and booted to the boot loader screen? Windows sees the phone as a different device when connected normally and at the boot loader. When I installed the driver It popped up with the message that it was for a different version, but it gave me an option to install it anyway. Are you logged in to Windows with admin rights?

i had the same problem earlier tonight, i figured since i was running win7 i might as well try using the virtual xp out. I started the VM up and the attached the phone using the drop downs and it worked flawlessly.

yup .. it's working fine for me too.. if you are using 64 bit version ... u need to use the 64 bit usb driver too... u can get it here
http://forum.xda-developers.com/showthread.php?t=446274
Also you may have trouble installing it in Windows 7 unless you turn off driver signing at boot menu. Hit F8 and select no driver signing and you should be able to install it no problem... u will also have to disable driver signing each time you plan on using adb/fastbboot

foxlin said:
I tried your method Southsko, but it didnt work for me. I think the problem is that windows 7 refuses to install the driver for the htc dream, because its not "intended for this platform" is there a way to force it to install the driver? or manually install the driver?
Click to expand...
Click to collapse
When choosing the driver software, make sure you select the "x86" folder instead of usb_driver or any parent folder. This is because the wizard search sub directories in alphabetical order, and will stop when it find the driver for x86-64(amd64). Then it will simply tell you "not intended for this platform" without looking in the x86 folder.
Also, you do not have to disable driver signing for this to work.

trmacdonal said:
When I wrote that tutorial it was using Windows 7 beta. I have also used it since I upgraded to Win7 RC, so I know that it can work. Did you make sure to install driver when the phone is connected and booted to the boot loader screen? Windows sees the phone as a different device when connected normally and at the boot loader. When I installed the driver It popped up with the message that it was for a different version, but it gave me an option to install it anyway. Are you logged in to Windows with admin rights?
Click to expand...
Click to collapse
I am in bootloader mode, and I am an admin. It didn't give me the option to install it anyways. That is interesting. I am currently still using the windows 7 beta. I have tried manually selecting the specific driver files. It is still not working, any other ideas?

I finally got it! thanks everyone. The solution was instead of having it search through the files, there is actually an option below it to pick the driver from a list, the list wasnt the right one originally, then i manually changed the directory and it worked. Thanks for the help everyone!

billc.cn said:
When choosing the driver software, make sure you select the "x86" folder instead of usb_driver or any parent folder. This is because the wizard search sub directories in alphabetical order, and will stop when it find the driver for x86-64(amd64). Then it will simply tell you "not intended for this platform" without looking in the x86 folder.
Also, you do not have to disable driver signing for this to work.
Click to expand...
Click to collapse
How come when I installed this on Beta I got the message that I could not install a non-digitally signed driver? I was not able to install it myself until I disabled it at boot... maybe the 32 bit version is signed.

[Q] Device debugging with Eclipse

I'm very new to Android development (my first app), so please bear with me.
I'm using Eclipse with the android SDK. Using the Android SDK and AVD Manager, I've installed the Usb Driver package, rev 3.
To this point, I've been using the emulators to debug and develop. Now I need to debug on my device (bought a ViewSonic GTablet). Somewhere in my searching for solutions to how to get this going, I found that I need to get the drivers correctly installed. Those instructions directed me to:
- Modify the android_winusb.inf file in the usb_driver folder
- Install USBDeview program
- Removed all drivers associated with Andriod and NVIDIA Tegra 2 (I think there were 3 or 4)
- Connect the GTablet with USB and follow new found hardware wizard. Direct it to modified .inf file
The problem is, the "Found New Hardware Wizard" does its thing automatically without user intervention. I end up with 1 NVIDIA Tegra 2 USB Device driver. I think I'm supposed to have another driver called something like "Android Composite ADB Interface".
I tried using the Add Hardware wizard to install this, but it always results in saying "This device cannot start. (Code 10)".
Sorry for this lengthy explanation...can anyone please help?

Hi,
I struggled getting adb working until today. There's info for getting adb working with Gtab here:
http://forum.xda-developers.com/showthread.php?t=827209
The key for me was adding the 3 lines to the .inf. Make sure you have USB debugging enabled on the tab.
Then, in Win Device Manager uninstall the devices under Android.
Then unplug the USB, then reboot Windows.
After Windows starts, plug in USB, then when wizard pops up, browse to the USB driver dir.
Jim

Thank you jimcpl for the reply.
It's still a no-go.
I have done all the steps lined out in the link you provided--and thought your reboot step may be the key to making it work, but that didn't do it.
When I plug the GTab back in, I do get a "found new hardware" popup message, but no wizard is appearing. The result is, the system is installing:
(With the help of USBDeview window)
Device Name: NVIDIA Harmony
Description: NVIDIA Tegra 2 USB Device
Device Type: Mass Storage --> This one I can use to transfer files
...
I see no other devices associated with the GTab
What device type should the "Android Composite ADB Interface" be?
Also...Maybe this is a silly question, but isn't it the miniUSB connection I should be plugging in to?

More info on the problem
I found that when attempting to install the adb driver, the system is not using the .inf file I'm pointing it to. It is using one titled "oem24.inf". I found this by looking in Start->All programs->Accessories->System Tools->System Information. Then under Software Environment/Signed Drivers there is the "Android ADB Interface" listed.
I can see the referenced oem24.inf file (and associated .pnf files) under C:\Window\inf folder
BTW. I'm on Windows XP Pro SP3
In here I see at least 3 .ini files that have the three lines that we're using to modify the android_windusb.inf file with.
So the question now becomes...
How do I get the installation (or driver update) to use the .inf file I point it to?
Another recent thread suggested that window's supplied drivers will have to be removed. Are these what he may be referring to? If so how do I do that?
PLEASE -- I need a response from someone that knows something about this!

Memory doesn’t serve me too well in windows xp but go to device manager, click on action, add legacy hardware, Install the hardware that I manually select or something close to that then, have disk and point to the directory where the inf is located and install it. Make sure you modded the inf from the post above and you should be good to go.

Thanks...but, not the solution
I really appreciate the suggestion littleoldme!
In XP, Device Manager/Action menu only has the "Help" link which lauches the Microsoft Management Console. Doing a search for "Legacy" in the console results in no hits.
So I'm still stuck

JRDev said:
I really appreciate the suggestion littleoldme!
In XP, Device Manager/Action menu only has the "Help" link which lauches the Microsoft Management Console. Doing a search for "Legacy" in the console results in no hits.
So I'm still stuck
Click to expand...
Click to collapse
I found your answer.. see URL below
tegradeveloper.nvidia.com/tegra/forum/after-installing-froyo-adb-cant-see-device

I want to thank all who responded with suggestions to this problem.
I've followed all advice given and carefully followed all directions given in suggested links.
Unfortunately, there seems to be some underlying condition on my pc that is preventing the successful installation of the necessary adb driver. No matter what I have done so far, Windows is choosing NOT to use the driver I point it to, and use what it wants instead. I don't even get the "New Hardware" wizard when following the directions. It installs automatically and I have to launch a separate "Install new Hardware" dialog.
Anyway...through persistence, I've been able so far to develop this first app without the debug connection to the device using the development emulators, then installing the signed .apk on the device for further testing (via the one USB mass storage connection I do get).
So, maybe one day I'll find the reason, but for now I'll be purging on to get the app ready to go.
Thanks again for all help received.

I just come across this thread. After insert the usb device, then you might might find the unknown device in device manager. unstall that unknown device. And then do a hardware scan again in device manager. After it find your device again, point back to your USB inf file. It might work this way.

One thing I forgot. Do not unplug your device between uninstall and hardware scanning.

AAAHHH! GTAB Eclipse ADB frustration!
Thanks for all the tips, everyone, but I've been trying for days to be able to connect my gtab to use as a device for installing/debugging my apps. I too am running Eclipse using the emulators to date.
I've tried the steps outlined in the link provided by jimcpl, as well as others that are slightly varied, but to no avail.
I am running Vista SP2. My Gtab has been rooted, running ClockworkMod, and TnTLite 2.2. I also updated the Google USB package, rev 4 via the SDK/AVD Manager after attempting to use the rev 3 usb package.
Should any of these be reason why I cannot connect my gtab to Eclipse via ADB?
I'm totally frustrated...If anyone has any other suggestions, please forward them on!
Thanks in advance.

rlapela said:
Thanks for all the tips, everyone, but I've been trying for days to be able to connect my gtab to use as a device for installing/debugging my apps. I too am running Eclipse using the emulators to date.
I've tried the steps outlined in the link provided by jimcpl, as well as others that are slightly varied, but to no avail.
I am running Vista SP2. My Gtab has been rooted, running ClockworkMod, and TnTLite 2.2. I also updated the Google USB package, rev 4 via the SDK/AVD Manager after attempting to use the rev 3 usb package.
Should any of these be reason why I cannot connect my gtab to Eclipse via ADB?
I'm totally frustrated...If anyone has any other suggestions, please forward them on!
Thanks in advance.
Click to expand...
Click to collapse
On the Gtab, is USB debugging enabled?
On the Windows machine, did you add the 3 lines for tetra?
Jim

jimcpl said:
On the Gtab, is USB debugging enabled?
On the Windows machine, did you add the 3 lines for tetra?
Jim
Click to expand...
Click to collapse
Thanks Jim...Yes, and yes. I finally got connected. Old drivers were conflicting, and even though I'd repeatedly uninstall them in Device Manager, the ADB USB drivers would load, but not start the device. I finally got USBDeview to uninstall them successfully after many attempts and reboots, plugged in my GTab, and finally installed correctly, and it works like a champ!

rlapela said:
Thanks Jim...Yes, and yes. I finally got connected. Old drivers were conflicting, and even though I'd repeatedly uninstall them in Device Manager, the ADB USB drivers would load, but not start the device. I finally got USBDeview to uninstall them successfully after many attempts and reboots, plugged in my GTab, and finally installed correctly, and it works like a champ!
Click to expand...
Click to collapse
Hi,
Ok, thanks. I'm glad it's working for you now.
FYI, I think that when you "uninstall" a device from Device Manager in Windows, it doesn't physically delete driver files, etc. from your hard drive. It just removes the references to the removed device drivers from the Windows configuration.
That's why if you reboot, or do a scan for devices again, and if Windows thinks that it detects the physical device, it'll try to use the same driver files, .inf, etc. In that case, you have to force the installation of the new/correct driver, by not letting Windows automatically find the drivers (because otherwise, Windows will find the same ones from before, the non-working ones).
It's kind of a pain sometimes ... I ran into the same thing when I tried to install the ADB USB drivers. I downloaded the USB driver files from Android dev website, but those are generic. They have stuff in the .inf for some phones/devices that Google has relationships with, but not the "proprietary" ones like for the Gtab. That's why you have to add the 3 lines, which match (I guess) the Gtab.
Jim

[Q] ADB no devices

Hey guys, I followed the guide, added the lines to the inf, even downloaded the other inf and coppied over it. I can not get ADB to recognize my gTablet. I even removed the mass storage driver that was associated with the tablet
I know my adb works with my mytouch slide.
Has anyone else not been able to connect adb to the gTablet?
I followed the guide exactly.
There are no errors in my device manager.
USB debugging mode is on.
I cant think of anything else to try.

Update driver
This is the steps I took, FYI I'm running Windows 7 on my computer.
Completed the the steps in the Guide (as you did). Then had to Go to Control Panel>Device Manager; and had to manually update the drivers. In Device Manager select the G Tablet>Driver>Update Driver and navigate to your usb_driver folder in your SDK.

ShreddinPB said:
Hey guys, I followed the guide, added the lines to the inf, even downloaded the other inf and coppied over it. I can not get ADB to recognize my gTablet. I even removed the mass storage driver that was associated with the tablet
I know my adb works with my mytouch slide.
Has anyone else not been able to connect adb to the gTablet?
I followed the guide exactly.
There are no errors in my device manager.
USB debugging mode is on.
I cant think of anything else to try.
Click to expand...
Click to collapse
Not sure what you are using ADB for however I have had issues with my PC retaining the driver for it as well. I use an app called ADBWireless that allows me to connect wirelessly and use ADB commands for a few simple things. It's a good workaround if your just pushing and pulling a few apps and such.

Emul8or said:
This is the steps I took, FYI I'm running Windows 7 on my computer.
Completed the the steps in the Guide (as you did). Then had to Go to Control Panel>Device Manager; and had to manually update the drivers. In Device Manager select the G Tablet>Driver>Update Driver and navigate to your usb_driver folder in your SDK.
Click to expand...
Click to collapse
Thats what I figured I would do. I am also in Windows 7 but X64. I go to the device manager and I dont have a gTablet listed anywhere that I can find, but like I said there are no exclamation points in the device manager.. no devices that are not working.
I tried to update the "Portable Devices>f:" that shows up when I plug in the tablet but it wont let me.
So in your device manager.. there is a top level listing for "gTablet"?

it2steve said:
Not sure what you are using ADB for however I have had issues with my PC retaining the driver for it as well. I use an app called ADBWireless that allows me to connect wirelessly and use ADB commands for a few simple things. It's a good workaround if your just pushing and pulling a few apps and such.
Click to expand...
Click to collapse
There is a fix posted for the slowdown issue after resume from sleep, and you ADB to fix it

ShreddinPB said:
Thats what I figured I would do. I am also in Windows 7 but X64. I go to the device manager and I dont have a gTablet listed anywhere that I can find, but like I said there are no exclamation points in the device manager.. no devices that are not working.
I tried to update the "Portable Devices>f:" that shows up when I plug in the tablet but it wont let me.
So in your device manager.. there is a top level listing for "gTablet"?
Click to expand...
Click to collapse
Here's what dev mgr looks like on XP...
Jim

ShreddinPB said:
Thats what I figured I would do. I am also in Windows 7 but X64. I go to the device manager and I dont have a gTablet listed anywhere that I can find, but like I said there are no exclamation points in the device manager.. no devices that are not working.
I tried to update the "Portable Devices>f:" that shows up when I plug in the tablet but it wont let me.
So in your device manager.. there is a top level listing for "gTablet"?
Click to expand...
Click to collapse
Is there anything under USB drivers at the bottom for android bridge, or something along those lines? If not does it list NVIDIA Harmony drives anywhere? If neither try unplugging and plugging in your device a few times to see what dissapears when you plug it in. Reply back and we can go from there.

davinci07 said:
Is there anything under USB drivers at the bottom for android bridge, or something along those lines? If not does it list NVIDIA Harmony drives anywhere? If neither try unplugging and plugging in your device a few times to see what dissapears when you plug it in. Reply back and we can go from there.
Click to expand...
Click to collapse
Found it.. it was under "Universal Serial Bus Controllers" and called "USB storage device" i believe.
I tried updating the driver with the andoid one, but it errored out and wouldnt load it. After that however, 2 new devices popped up.. both the Nvidia harmony drive, and another nvidia tegra one. The harmony drivers failed to load.. so I pointed at the directory in the SDK and bam it works!!
Thanks guys!
But also btw.. before I got this working, I did use ADBWireless to run the adb shell and run that camand mentioned in the main thread that is supposed to stop the slow downs.. and I think its working.

enjoy, can you point me to the post that you needed this for? Also, now that ADB works you can start making your own apps. With either Eclipse and Android SDK (more advance route, but there is alot of good books that could help you alot) or with app invnetor that just got released to the public.

[Q] Fail to see my Nexus 5 on Win7

Hi Guys,
I had a rooted 4.4.2 device, when I got the the 4.4.3 upgrade and I think that from then I cannot see my device on my laptop.
(I am not sure of that because I CAN see it on my work desktop...)
Anyway, whatever I do - I get the following results:
1. Device manager shows me under the "Portable Devices" the brance F:\
2. When I try to install new ADB drivers, it tells me that "WPD fileSystem volume driver" is the best for me...
Storage usb connection setting is set to be MTP.
Meanwhile, I cannot see my nexus 5 files on my laptop
Please assist, Thanks!!!

dushkin said:
Hi Guys,
I had a rooted 4.4.2 device, when I got the the 4.4.3 upgrade and I think that from then I cannot see my device on my laptop.
(I am not sure of that because I CAN see it on my work desktop...)
Anyway, whatever I do - I get the following results:
1. Device manager shows me under the "Portable Devices" the brance F:\
2. When I try to install new ADB drivers, it tells me that "WPD fileSystem volume driver" is the best for me...
Storage usb connection setting is set to be MTP.
Meanwhile, I cannot see my nexus 5 files on my laptop
Please assist, Thanks!!!
Click to expand...
Click to collapse
Delete the device in device manager and then let it find it again.
Sent from my Nexus 5 using XDA Free mobile app

Thanks
If you mean to uninstall it, then I did it couple of times, and now again when the device was disconnected. Then I reconnected the device to the USB port, and scanned the deice manager for changes.
I got the same result - see attachement.

Delete then reboot both devices. Connect phone again. If same, delete device and reboot phone whilst still connected
If that fails, delete and use "universal naked driver"
Sent from my Nexus 5 using Tapatalk

dushkin said:
If you mean to uninstall it, then I did it couple of times, and now again when the device was disconnected. Then I reconnected the device to the USB port, and scanned the deice manager for changes.
I got the same result - see attachement.
Click to expand...
Click to collapse
Never seen that before. Your drivers obviously aren't set up right. Google 15 second adb drivers xda and use that to install the drivers. It'll also set up adb/fastboot which you may or may not need. It gives you the option
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Never seen that before. Your drivers obviously aren't set up right. Google 15 second adb drivers xda and use that to install the drivers. It'll also set up adb/fastboot which you may or may not need. It gives you the option
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
No need google.. Section 1b of the resources thread in my signature
Sent from my Nexus 5 using Tapatalk

Are you trying to use ADB mode? If so, and it's not recognizing the device, try using ADB Driver Installer. It worked for me.

dushkin said:
Hi Guys,
I had a rooted 4.4.2 device, when I got the the 4.4.3 upgrade and I think that from then I cannot see my device on my laptop.
(I am not sure of that because I CAN see it on my work desktop...)
Anyway, whatever I do - I get the following results:
1. Device manager shows me under the "Portable Devices" the brance F:\
2. When I try to install new ADB drivers, it tells me that "WPD fileSystem volume driver" is the best for me...
Storage usb connection setting is set to be MTP.
Meanwhile, I cannot see my nexus 5 files on my laptop
Please assist, Thanks!!!
Click to expand...
Click to collapse
I had a similar issue. In order to get my Windows 7 laptop to recognize my N5, I first turned off USB Degugging then connected my N5 to the laptop. Then it showed up.
Sent from my SPH-L720

optimummind said:
I had a similar issue. In order to get my Windows 7 laptop to recognize my N5, I first turned off USB Degugging then connected my N5 to the laptop. Then it showed up.
Sent from my SPH-L720
Click to expand...
Click to collapse
It's supposed to work fine even with it on, at least it did when I had it on. Tested on Win 7, 8, 8.1 and 8.1U1 lol. I never had any issues with USB ever.
Or use Linux, it'll work right away..

It's not set to Camera (PTP) instead of Media Device (MTP) ?

Case Status
Guys.
Thank you all for your kind help.
I tried at least most of your advises - but there were no joy...
I think that the best I should do now is somehow clean up my system from old drivers and related installations.
So, taking aside the option of reinstalling windows, can you share with me some procedures that will enable me to get rid of all old drivers and files and to reach a state of a clean system, so I can then start reinstalling the drivers again?
Thanks a lot!

Well... here is the solution!!!!
https://www.topnotchtablets.com/FixUSBproblems
dushkin said:
Guys.
Thank you all for your kind help.
I tried at least most of your advises - but there were no joy...
I think that the best I should do now is somehow clean up my system from old drivers and related installations.
So, taking aside the option of reinstalling windows, can you share with me some procedures that will enable me to get rid of all old drivers and files and to reach a state of a clean system, so I can then start reinstalling the drivers again?
Thanks a lot!
Click to expand...
Click to collapse

I have similar problems, and as many times as ive tried to uninstall and reinstall i cannot access it from my 1 laptop. However, another laptop connects fine to it- even though i used the same drivers on both laptops. thats the only way i was able to get it to work for me.
dushkin said:
Hi Guys,
I had a rooted 4.4.2 device, when I got the the 4.4.3 upgrade and I think that from then I cannot see my device on my laptop.
(I am not sure of that because I CAN see it on my work desktop...)
Anyway, whatever I do - I get the following results:
1. Device manager shows me under the "Portable Devices" the brance F:\
2. When I try to install new ADB drivers, it tells me that "WPD fileSystem volume driver" is the best for me...
Storage usb connection setting is set to be MTP.
Meanwhile, I cannot see my nexus 5 files on my laptop
Please assist, Thanks!!!
Click to expand...
Click to collapse

[Q] Too dumb to even get drivers!?!

Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E

ericdg said:
Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E
Click to expand...
Click to collapse
ADBSetup will get you the drivers you are looking for:
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
Worked for any Android phone I tried.

Thanks, I'll give that a shot and see what happens!

Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E

ericdg said:
Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E
Click to expand...
Click to collapse
Easiest way to tell is open up a command prompt in the folder that adbsetup installed to (C:\ADB I think) and type:
Code:
adb devices
If all is well, then the device will be part of the listing.

Thanks Joel.............I think it worked.
The ADB command came back with:
List of devices attached
HT22_______7 device
That's not a number that I've ever seen associated with my phone, but I assume that's it.
Confirmed.................I was able to reboot the phone by ADB!

Excellent! This will also mean the fastboot commands needed to unlock your bootloader will work too.

.........one would think so, Joel, but I can't get fastboot to do anything. ADB recognizes the phone, and will reboot into bootlocker, but once there it'll do nothing. Windows pops up a message shortly after bootlocker opens that says something to the effect of "there was a problem with USB device not recognized". I tried the command "fastboot devices", but got nothing. I know that I'm darned close, and it's probably something simple, but just can't get it to work. Maybe I need additional drivers for fastboot, or need to move it to another directory?
Thanks,
~E

Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.

joel.maxuel said:
Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.
Click to expand...
Click to collapse
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E

ericdg said:
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E
Click to expand...
Click to collapse
Dont know where you got your HTC drivers, but you should try the ones in this post (step one - hopefully its still live - if not I can dropbox it for you):
http://forum.xda-developers.com/showthread.php?t=1801106
Sent from my LG-D520 using XDA Free mobile app

You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.

ericdg said:
You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.
Click to expand...
Click to collapse
Uh-oh. Either the link was dead when I went through this process back in April, or I had bad organizing skills at one point and didn't put the file in the Doubleshot folder before completing a purge. Either way, I don;t have the file.
Nor did I really need it. The second Doubleshot I rooted I ended up using it in my native Linux environment (no drivers needed), vs my Windows XP emulated through VirtualBox. That's what you could do. Get a live Debian DVD (Im like the XFCE desktop version), boot in, get fastboot:
Code:
sudo apt-get install fastboot
And then use fastboot:
Code:
sudo fastboot ...

Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E

ericdg said:
Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E
Click to expand...
Click to collapse
Just need the one. My recommended file to download is this:
http://cdimage.debian.org/debian-cd...ybrid/debian-live-7.6.0-i386-xfce-desktop.iso
Burn the image (not the file) onto a DVD (can be a rewritable) and reboot with the disc in the drive. Once it's fully loaded, you can either enter commands by clicking on the "terminal" icon on the bottom of the screen (preferred), or press Ctrl + Alt + F1 to get a prompt (may have to log in as "user", there shouldn't be a password). Hope this helps.