Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E
ericdg said:
Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E
Click to expand...
Click to collapse
ADBSetup will get you the drivers you are looking for:
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
Worked for any Android phone I tried.
Thanks, I'll give that a shot and see what happens!
Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E
ericdg said:
Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E
Click to expand...
Click to collapse
Easiest way to tell is open up a command prompt in the folder that adbsetup installed to (C:\ADB I think) and type:
Code:
adb devices
If all is well, then the device will be part of the listing.
Thanks Joel.............I think it worked.
The ADB command came back with:
List of devices attached
HT22_______7 device
That's not a number that I've ever seen associated with my phone, but I assume that's it.
Confirmed.................I was able to reboot the phone by ADB!
Excellent! This will also mean the fastboot commands needed to unlock your bootloader will work too.
.........one would think so, Joel, but I can't get fastboot to do anything. ADB recognizes the phone, and will reboot into bootlocker, but once there it'll do nothing. Windows pops up a message shortly after bootlocker opens that says something to the effect of "there was a problem with USB device not recognized". I tried the command "fastboot devices", but got nothing. I know that I'm darned close, and it's probably something simple, but just can't get it to work. Maybe I need additional drivers for fastboot, or need to move it to another directory?
Thanks,
~E
Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.
joel.maxuel said:
Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.
Click to expand...
Click to collapse
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E
ericdg said:
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E
Click to expand...
Click to collapse
Dont know where you got your HTC drivers, but you should try the ones in this post (step one - hopefully its still live - if not I can dropbox it for you):
http://forum.xda-developers.com/showthread.php?t=1801106
Sent from my LG-D520 using XDA Free mobile app
You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.
ericdg said:
You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.
Click to expand...
Click to collapse
Uh-oh. Either the link was dead when I went through this process back in April, or I had bad organizing skills at one point and didn't put the file in the Doubleshot folder before completing a purge. Either way, I don;t have the file.
Nor did I really need it. The second Doubleshot I rooted I ended up using it in my native Linux environment (no drivers needed), vs my Windows XP emulated through VirtualBox. That's what you could do. Get a live Debian DVD (Im like the XFCE desktop version), boot in, get fastboot:
Code:
sudo apt-get install fastboot
And then use fastboot:
Code:
sudo fastboot ...
Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E
ericdg said:
Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E
Click to expand...
Click to collapse
Just need the one. My recommended file to download is this:
http://cdimage.debian.org/debian-cd...ybrid/debian-live-7.6.0-i386-xfce-desktop.iso
Burn the image (not the file) onto a DVD (can be a rewritable) and reboot with the disc in the drive. Once it's fully loaded, you can either enter commands by clicking on the "terminal" icon on the bottom of the screen (preferred), or press Ctrl + Alt + F1 to get a prompt (may have to log in as "user", there shouldn't be a password). Hope this helps.
Related
I originally posted this inside the Glorious Overdose V2 thread, but decided to post here as well.
For some reason my computer won't recognize my Sidekick when I plug it in via usb. I do have the samsung drivers installed and it will read my friends Samsung Droid Charge just fine, but when I plug my Sidekick in it comes up saying "USB Device Not Recognized". So far I've tried uninstalling and reinstalling the drivers from the device manager to no avail. Wondering if anyone has an idea as to what it could be. I've also tried googling the solution and everyone says to just uninstall and reinstall the drivers and it should work. Now the phone is not plugged into a USB Hub, extender, or case, it is plugged directly into a usb port on the mother board.
PC Specs just in case:
Motherboard - Gigabyte GA-970A-D3
OS - Windows 7 Ultimate x64
CPU - AMD FX-4100
Memory - 8GB DDR3 1066
Phone:
T-Mobile Sidekick 4G running Glorious Overdose V2
Nothing added just the rom and some apps/games.
I have tried with USB Debugging on and off, either way does not work.
Update: I have since tried Kies mini, as well as the drivers found on Softpedia. Neither of those worked, so I just got done reformatting and reinstalling Windows hoping that would work. At first it did not, right now I am running windows update to see if that was the issue, I'll update of what the outcome is.
Update: After installing all available Windows updates it's still not recognizing the phone. Now no matter what it's saying it's an Unknown Device. Even after I try and do a manual driver update and tell it to look in the folder with the driver files from Softpedia. I'm at a complete loss now.
If anyone has any idea's please let me know.
What mode do you have the phone in? Settings->Applications->USB Settings. It should be in Mass Storage if you want to access its SD Card.
Maybe put another rom on the sd card and flash something else, I don't think it would be a rom issue but it would be worth a try?
Sent from my SGH-T839 using XDA
Jax184 said:
What mode do you have the phone in? Settings->Applications->USB Settings. It should be in Mass Storage if you want to access its SD Card.
Click to expand...
Click to collapse
It's set to USB Debugging. But even then, it should read as something else other then Unknown Device when I plug it in. I have tried plugging it in and selecting Mass Storage, still comes up as Unknown Device.
HewettBR said:
Maybe put another rom on the sd card and flash something else, I don't think it would be a rom issue but it would be worth a try?
Sent from my SGH-T839 using XDA
Click to expand...
Click to collapse
I've thought about that, and from everything I can see it's either the ROM or the drivers. So we'll see...I'll probably try a different ROM and see what happens.
I suggest turning USB debugging off and mass storage on, for how you'll be using it. And recall that you have to change this stuff with the USB cable unplugged.
I've tried that, and after talking with the T2 Technical Support from Samsung for 45min today, the only option left is to send the phone in to get worked on. Though, I'm going into the T-Mobile store and see if they can't replace the phone or give me a loner while this one is out getting repaired.
More info request.
Can you provide us with the names and links to the drivers you have tried?
DuctTapedGoat said:
Can you provide us with the names and links to the drivers you have tried?
Click to expand...
Click to collapse
Kies Mini - http://www.samsung.com/us/support/owners/product/SGH-T839HABTMB
Softpedia - http://drivers.softpedia.com/get/MOBILES/Samsung/SAMSUNG-USB-Driver-1480.shtml
As well as the Samsung Vibrant drivers from both of those sites.
Samsung SideKick 4G Drivers
www DOT filedropper DOT com FWSLASH sk4gx64drivers
This is the exact drivers I pulled off of my own machine, I ran into massive issues with those same driver packages, especially in getting the initial root to take with a few different utilities designed to grant sudo/su/root access, and these are the drivers I have running currently, just pulled off my own machine. I run Windows 7 x64, but as well, there should be no reason why these drivers wouldn't work on a x86 machine and/or OS.
NOTE : I apologize it's not a proper link, but I'm unable to post a raw link until I hit my 8th post. I will come back and fix this after I hit that 8th post, but until then it will be ghetto-bypass HTML.
DuctTapedGoat said:
www DOT filedropper DOT com FWSLASH sk4gx64drivers
This is the exact drivers I pulled off of my own machine, I ran into massive issues with those same driver packages, especially in getting the initial root to take with a few different utilities designed to grant sudo/su/root access, and these are the drivers I have running currently, just pulled off my own machine. I run Windows 7 x64, but as well, there should be no reason why these drivers wouldn't work on a x86 machine and/or OS.
NOTE : I apologize it's not a proper link, but I'm unable to post a raw link until I hit my 8th post. I will come back and fix this after I hit that 8th post, but until then it will be ghetto-bypass HTML.
Click to expand...
Click to collapse
Thank you, I tried unpacking them to a folder on C:\ went into Device Manager, right clicked on the Unknown Device, Update Driver Software..., Browse My Computer for Driver Software, Set the search to C:\, and still saying Unknown Device is the best driver software for it. No idea why it's doing this.
Proper Driver Update
What is going on is that Windows is seeing a more recent signature file attached to the SK4G drivers on your computer (I don't believe anything at all is wrong with your device) than the working ones there.
First, in Add/Remove Programs, uninstall the Samsung Kies and Samsung Driver pack you installed earlier. Now...
Go into on your PC:
://windows/system32
And locate the same file names, cut them all, and paste them in a temporary folder you create, preferably on the desktop or something similar. You may not find every file, and that's okay, just the ones you can find. Next, you will be wanting to paste the driver files from the package I uploaded. Now, turn off Automatic Updates, so it doesn't automatically install drivers upon connection. Reboot the computer, double check and make sure Automatic Upates are off when you log back on. Now, connect the device and see if it gives you the same results. By removing the old drivers which don't work, you'll be able to force it to the ones we know work, and you /should/ have success. As well - USB data debugging active and activating connection for data transfer via the notification pulldown menu would be the best way to do this initially.
Would I be looking in c:\windows\system32\drivers for the same file names as the ones you packed up?
Ok, so the only one I could find in the drivers folder was modem.sys. But it will not let me move/replace the one that's already in there. It's telling me access is denied, same thing when I try and set the permissions it will not let me. I am logged in as an Administrator, as well it says it when I log in as THE Administrator account. So yeah...
Cool - modem.sys is a stock one that is shared with the device, so that's fine.
With the other two programs uninstalled, the old drivers uninstalled, and forcing it into those by pasting them into //win/sys32/drivers you should be in business. Hmm. You can try UnlockRoot.com's device rooter - I know they have an auto driver detector in their program. As well, you can try SuperOneClick, but I don't remember if they do or no. What about going in from the Recovery menu and toggling USB? Anything wierd going on in the /mounts? What about ADB shell access from the Android SDK on Windows?
DuctTapedGoat said:
Cool - modem.sys is a stock one that is shared with the device, so that's fine.
With the other two programs uninstalled, the old drivers uninstalled, and forcing it into those by pasting them into //win/sys32/drivers you should be in business. Hmm. You can try UnlockRoot.com's device rooter - I know they have an auto driver detector in their program. As well, you can try SuperOneClick, but I don't remember if they do or no. What about going in from the Recovery menu and toggling USB? Anything wierd going on in the /mounts? What about ADB shell access from the Android SDK on Windows?
Click to expand...
Click to collapse
I tried plugging the phone in, still showing up as Unknown Device. Tried UnlockRoot.com's program, no change. Installing the Android SDK right now, as well as I tried deleting the INFCACHE.1 file, and no change with that either. Once I'm done installing the Android SDK I'll redelete the INFCACHE.1 file and restart and try the phone again.
I did go in and check the mounts in recovery and they were set to:
UNMOUNT CACHE
MOUNT DATA
UNMOUNT SDCARD
UNMOUNT SYSTEM
Thank you for your help so far.
UPDATE: So after installing the Android SDK, deleting the INFCACHE.1 file, restarting, and then plugging the phone in, comes up and says the USB Device is Not Recognized. Then goes to search the preconfigured driver folders, and fails to install the driver for Unknown Device. And ADB Devices shows no devices as well(didn't think it would, but yeah).
UPDATE: So after using my friends phone as a conduit to throw the Stock Odexed KJ2 w/ Root(http://forum.xda-developers.com/showthread.php?t=1328698) onto my SDCard and flashing that the phone seemed to go into a soft brick at pre-boot screen(where it says SAMSUNG T-Mobile blah blah blah). Mind you this would freeze before it was even able to get into recovery. So I took it into T-Mobile and they are doing a manufacturer warranty replacement. So hopefully this next phone will be able to connect to the computer and be read correctly.
Wow the threads make it look so easy but here are my steps so far and I'm a couple hours into S-Off but had to go through all this stuff (The basics I guess but this is my first time on android 4.4 so I was pretty lost.
1) First I found the XDA Developer link here which has a QR code to scan to download the file.
2) Realized I did not have a QR Scanner installed so I installed google goggles.
3) Scanned the code and realized it did not work and simply takes me to the xda developers forum
4) Searched for another link and found this one http://dottech.org/156395/how-to-roo...verizon-guide/ (This QR code works)
5) downloaded and installed the weaksauce exploit.
6) Decided I will backup my data on the phone before continuing .
7) Installed titanium backup
8) Was told to enable USB debugging
9) Found this can only be enabled if your phone has development mode enabled.
10) Searched for how to do that on this newest version of android and found this link. http://www.pcadvisor.co.uk/how-to/go...formance-mode/ which I was able to figure out the exact steps for the M* on my own.
11) In the newly unlocked developer options from the enabled USB debugging.
12) Titanium backup reminded me I do not have the paid version (but I do own a licesnse!) Need to copy the license file to the SD card.
13) Realized I don't have an external SD card installed.
14) Searched the house for a paperclip to pop out the SD card slot, no dice... Found a needle and trimmed the head off it with wire cutters, and popped out the door.
15) Installed the SD card!
16) Titanium backup says it cannot write to the external SD card (Well this is where I like to keep my backups not on the internal Card....)
So Starting from 18 how do I:
1) Use titanium backup to backup to my external SD card (No write permission). I have tried the SDFix application and that did not work. How do i get write permission to backup with titanium backup?
2) Where do I download the HTC M8 Drivers?
Ok so I guess I cannot backup the phone, lets say I will just skip the backup.
I'm trying to S-Off using the weaksauce method. I go to the folder where I downloaded firewater and type adb reboot and I get a message that my device is unauthorized..
What now?
Did you look here ? http://forum.xda-developers.com/showthread.php?t=2708628
Works great.
You can just use internal storage for your backup, once you get the phone s offed . Then do a backup to the external sd card. You need root access and a kernel without write protection. Take your time, it'll work.
Sent from my Nexus 7 using XDA Premium 4 mobile app
I would recommend watching some of these videos, they are very helpful.
http://forum.xda-developers.com/showthread.php?t=2697957
+1 on the videos well worth watching!
Sent from my Nexus 7 using XDA Premium 4 mobile app
Did you get it figured out? If you didn't and still need some help, send me a PM and I'll walk you through step by step and help you get it done. I've walked three people through the S-OFF method now (using Teamviewer and chat) and am getting pretty efficient at it. Shoot me a PM if your still stuck.
Watch this...
https://www.youtube.com/watch?v=sLtmwN1UyUU
I'm having the exact same problem. I rooted the phone thinking that's all I'd need to do. But with TiBu I can't backup to my SD card. So now I'm trying to do the S-Off so I can solve that problem. But I can't get the adb to work either.
I installed the HTC Sync Manager "package" from HTC, which allegedly comes with the driver. But, when I plug the phone into the computer it doesn't even see an adb device for my phone. I'm familiar with adb devices because I used it on my Droid Bionic.
Then I downloaded what has been nicknamed the "HTC One Toolkit M8" and installed the "Universal Adb Driver" from that. Still, no adb device is detected. Frankly, I'm laughing and disgusted with this phone. I'm laughing because someone with my prior skills with android should have no problem with this. But disgusted because this phone has been the most counter-intuitive phone I've ever owned. Just trying to disable the lock screen took almost 30 minutes.
Anyone know what I'm doing wrong? When I plug the phone in right now it shows up under "Portable Devices" and that's it. My Bionic would pop up 3 devices(CD-ROM, media device or something of that sort and the adb device).
I've literally spent the last hour searching with Google trying to figure out what I'm doing wrong. I thought it was a driver problem, but now that I'm not seeing any "unknown" devices nor am I seeing the adb device I'm convinced I've screwed this up somehow.
Yay me. I can't find my old account info, so 1 post for me.
Edit: Also, after installing the "Minimal ADB and Fastboot" as well as the Android SDK, the command "adb devices" has never found my phone. LOL
Just an FYI...the tool to open the SD card slot comes with the phone. It's the metal piece with the HTC logo in the packaging that the manuals come in. You'll have to pull that part of the box apart to get it out.
It was suggested to first install htc sync manager with the drivers, then uninstall sync manager, but leave the drivers installed. Try that.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Pauls57 said:
It was suggested to first install htc sync manager with the drivers, then uninstall sync manager, but leave the drivers installed. Try that.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Also, if you have any other type of phone software such as pdanet installed on your computer, either uninstall it or close it before trying to run the exploit.
Pauls57 said:
It was suggested to first install htc sync manager with the drivers, then uninstall sync manager, but leave the drivers installed. Try that.
Click to expand...
Click to collapse
Yeah, I did that already. I'm convinced this isn't a driver issue since I never actually see the adb device(or an unknown device) in my device manager.
robocuff said:
Also, if you have any other type of phone software such as pdanet installed on your computer, either uninstall it or close it before trying to run the exploit.
Click to expand...
Click to collapse
I don't. I haven't gotten that far since I haven't gotten s-off done.
Are you using a USB 2.0 port on your computer. USB 3.0 will cause problems with ADB. What operating system does your computer have on it? Windows 8 doesn't seem to get along well with ADB either. Seems to work for some, and not for others.
Joshy8 said:
Yeah, I did that already. I'm convinced this isn't a driver issue since I never actually see the adb device(or an unknown device) in my device manager.
I don't. I haven't gotten that far since I haven't gotten s-off done.
Click to expand...
Click to collapse
That just seems to me that it IS more likely a driver issue. You should see your device name or at least unknown device. Open up your device manager, then unplug your phone and replug it in. See what it shows when it refreshes. It will be under portable devices or Android USB devices or both. Mine shows both. If you still need help shoot me a PM and I can walk you through.
robocuff said:
Are you using a USB 2.0 port on your computer. USB 3.0 will cause problems with ADB. What operating system does your computer have on it? Windows 8 doesn't seem to get along well with ADB either. Seems to work for some, and not for others.
Click to expand...
Click to collapse
Windows 8 doesn't have any problems with adb. I've used it flawlessly on several computers. USB 3.0 neither. USB 3.0 can however cause problems with Firewater running correctly.
nicholi2789 said:
That just seems to me that it IS more likely a driver issue. You should see your device name or at least unknown device. Open up your device manager, then unplug your phone and replug it in. See what it shows when it refreshes. It will be under portable devices or Android USB devices or both. Mine shows both. If you still need help shoot me a PM and I can walk you through.
Click to expand...
Click to collapse
Right, you just argued why I don't think it's a driver issue. I've played with ADB before. I plug my Droid Bionic in and ADB comes right up on my desktop. On my HTPC that doesn't have the driver installed I get an unknown device.
But, with my HTC One M8, I never get any ADB device or an unknown device.. I get the HTC media device or whatever it is(mounts the storage on the desktop0, but I have *never* seen an ADB device or an unknown device from my HTC One M8... ever.
Thanks for the offer of the PM. I'm going to bed since I'm only 3 hours past my bedtime. But I'll PM you tomorrow and hopefully we can figure this out.
Joshy8 said:
Right, you just argued why I don't think it's a driver issue. I've played with ADB before. I plug my Droid Bionic in and ADB comes right up on my desktop. On my HTPC that doesn't have the driver installed I get an unknown device.
But, with my HTC One M8, I never get any ADB device or an unknown device.. I get the HTC media device or whatever it is(mounts the storage on the desktop0, but I have *never* seen an ADB device or an unknown device from my HTC One M8... ever.
Thanks for the offer of the PM. I'm going to bed since I'm only 3 hours past my bedtime. But I'll PM you tomorrow and hopefully we can figure this out.
Click to expand...
Click to collapse
I don't know, I have had lots of driver issues on lots of devices and had to sort it out many times. Most notably was my Nexus 7 that thing was the hardest device to get drivers installed for, it took me hours. I've gotten pretty dang efficient at installing drivers nowadays though. I need more specific information about your set-up before I can really offer good advice though. The HTC Media Cd rom that you see pop up when you plug in is the CDROM.iso. It's just stupid HTC bloatware crap, you can disable it or delete it once you have root. When you plug it in you should see the CDROM popup on your desktop then it should mount as MTP too. You should be able to browse your internal and external storage.
One thing I would suggest though and you may think i'm crazy for it.. Swap the USB cable your using for a different one and try that on a different usb port. I've messed around trying to get drivers installed for hours, only to switch the USB cord and have it work just fine. I've even had this problem with brand new USB cords.
If you do still need help tomorrow don't hesitate to shoot me a PM, I would be glad to help.
Joshy8 said:
Right, you just argued why I don't think it's a driver issue. I've played with ADB before. I plug my Droid Bionic in and ADB comes right up on my desktop. On my HTPC that doesn't have the driver installed I get an unknown device.
But, with my HTC One M8, I never get any ADB device or an unknown device.. I get the HTC media device or whatever it is(mounts the storage on the desktop0, but I have *never* seen an ADB device or an unknown device from my HTC One M8... ever.
Thanks for the offer of the PM. I'm going to bed since I'm only 3 hours past my bedtime. But I'll PM you tomorrow and hopefully we can figure this out.
Click to expand...
Click to collapse
I don't know if this will help but I see you typing in adb device, it must be adb devices you must have the s.
Don't ask me how I know.
hager03 said:
I don't know if this will help but I see you typing in adb device, it must be adb devices you must have the s.
Don't ask me how I know.
Click to expand...
Click to collapse
Haha. I wont' ask. Thanks for the tip, but I am doing adb devices. It comes back and says something like "List of devices found" or something and then is blank. Of course, it works just fine on my Bionic.. haha. It's always listed.
This is going to be a silly question, but did you turn on USB Debugging in the developer options? Does the phone say USB debugging connected on the phone's notification tray?
You should either have unknown device or you should see it listed properly in device manager.
I would go through device manager and uninstall any devices related to the phone. When prompted I would also remove the drivers. Then follow the below guide.
http://forum.xda-developers.com/showthread.php?t=2742295
For years, I struggled to get ADB/FASTBOOT installed and working. I've succeeded fairly often but usually have a success/failure ratio of one hundred to one. I'm currently trying it again, so thought I'd make a request for info from someone more experienced than myself.
First of course, is USB Debugging enabled. Done.
Then install OEM USB drivers; in my case Samsung.
Finally install the "short" version of Android SDK Development tools (just adb and fastboot but nothing else).
Am I missing something? I usually have to keep "hacking and whacking" at the damn thing until I finally stumble upon the correct combination of components.
And of course different cables, different computers, different Windows versions, etc, etc, etc ad nauseum.
I even reinstalled Windows 7 for a "fresh" PC and EVEN that did not help.
SO.......... Anyone have any ideas what works "first time, every time". I'm desperate.
Boowho??
boowho said:
For years, I struggled to get ADB/FASTBOOT installed and working. I've succeeded fairly often but usually have a success/failure ratio of one hundred to one. I'm currently trying it again, so thought I'd make a request for info from someone more experienced than myself.
First of course, is USB Debugging enabled. Done.
Then install OEM USB drivers; in my case Samsung.
Finally install the "short" version of Android SDK Development tools (just adb and fastboot but nothing else).
Am I missing something? I usually have to keep "hacking and whacking" at the damn thing until I finally stumble upon the correct combination of components.
And of course different cables, different computers, different Windows versions, etc, etc, etc ad nauseum.
I even reinstalled Windows 7 for a "fresh" PC and EVEN that did not help.
SO.......... Anyone have any ideas what works "first time, every time". I'm desperate.
Boowho??
Click to expand...
Click to collapse
What are you trying to do with ADB
([emoji3590]09-09-18[emoji3590])
boowho said:
For years, I struggled to get ADB/FASTBOOT installed and working. I've succeeded fairly often but usually have a success/failure ratio of one hundred to one. I'm currently trying it again, so thought I'd make a request for info from someone more experienced than myself.
First of course, is USB Debugging enabled. Done.
Then install OEM USB drivers; in my case Samsung.
Finally install the "short" version of Android SDK Development tools (just adb and fastboot but nothing else).
Am I missing something? I usually have to keep "hacking and whacking" at the damn thing until I finally stumble upon the correct combination of components.
And of course different cables, different computers, different Windows versions, etc, etc, etc ad nauseum.
I even reinstalled Windows 7 for a "fresh" PC and EVEN that did not help.
SO.......... Anyone have any ideas what works "first time, every time". I'm desperate.
Boowho??
Click to expand...
Click to collapse
As long as you have the complete USB drivers for your device, USB debugging enabled and the adb 15 second installer installed on PC, it should work. When you connect your device to adb, you "should" get a prompt or notification on your device to allow adb access, if you do, grant it permission.
If you're trying to use fastboot on a Samsung device, you can give up on that notion, Samsung devices can't use fastboot for anything, it isn't compatible at all, you will never get it to work.
But...
ADB works just fine on Samsung.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
As long as you have the complete USB drivers for your device, USB debugging enabled and the adb 15 second installer installed on PC, it should work. When you connect your device to adb, you "should" get a prompt or notification on your device to allow adb access, if you do, grant it permission.
If you're trying to use fastboot on a Samsung device, you can give up on that notion, Samsung devices can't use fastboot for anything, it isn't compatible at all, you will never get it to work.
But...
ADB works just fine on Samsung.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
Thanks so much for your thoughts/reply. I found last night that stripping ALL previously installed USB drivers and re-installing the Samsung USB drivers got it working. I plugged the device in BEFORE installing Sammy's drivers and it showed in device manager (without a driver, of course). I then installed the drivers and it connected. At that point ODIN worked just fine. Then I did an "adb devices" and it responded as it should.
For me, all these "packages" (Like 15 second installer or something) with .bat files, etc are not needed at all for ADB and just make things more confusing.
Just the two executables and three .DLL files make ADB and fastboot work in windows; IF you have previously installed Sammy's drivers as mentioned above.
Finally, not to disagree with you (after all it was ME who came here looking for help), but FASTBOOT works just fine on my Samsung device (a Gear Live Watch). I have to use the command "adb reboot bootloader". The watch reboots and from there all fastboot commands seem to work just fine. I flashed several .img files that way.
It's possible (I suppose) that no other Sammy device will accept fastboot, because supposedly Sammy wasn't even involved in creating the firmware for that watch. Google did it ALL.
Oh, and one last thing..... Yes I HAD it all working, but now ADB devices shows the device as "unauthorized". It did not when I first did the ADB devices, but instead put up the popup asking for permission. Now it just says unauthorized and fails to popup the little message
I've gone thru all the "fixes" for this that I can find for this particular problem, but so far no joy.
Maybe it's just me, but setting up ADB/fastoot as ALWAYS been a pain is the ass.
Boowho??
boowho said:
Thanks so much for your thoughts/reply. I found last night that stripping ALL previously installed USB drivers and re-installing the Samsung USB drivers got it working. I plugged the device in BEFORE installing Sammy's drivers and it showed in device manager (without a driver, of course). I then installed the drivers and it connected. At that point ODIN worked just fine. Then I did an "adb devices" and it responded as it should.
For me, all these "packages" (Like 15 second installer or something) with .bat files, etc are not needed at all for ADB and just make things more confusing.
Just the two executables and three .DLL files make ADB and fastboot work in windows; IF you have previously installed Sammy's drivers as mentioned above.
Finally, not to disagree with you (after all it was ME who came here looking for help), but FASTBOOT works just fine on my Samsung device (a Gear Live Watch). I have to use the command "adb reboot bootloader". The watch reboots and from there all fastboot commands seem to work just fine. I flashed several .img files that way.
It's possible (I suppose) that no other Sammy device will accept fastboot, because supposedly Sammy wasn't even involved in creating the firmware for that watch. Google did it ALL.
Oh, and one last thing..... Yes I HAD it all working, but now ADB devices shows the device as "unauthorized". It did not when I first did the ADB devices, but instead put up the popup asking for permission. Now it just says unauthorized and fails to popup the little message
I've gone thru all the "fixes" for this that I can find for this particular problem, but so far no joy.
Maybe it's just me, but setting up ADB/fastoot as ALWAYS been a pain is the ass.
Boowho??
Click to expand...
Click to collapse
Samsung gear doesn't count, as you said, Samsung doesn't have anything to do with creating the firmware. I would think that any android device that Samsung had it's part in making firmware for, doesn't work with fastboot. But, devices that are Samsung "in name" only, may be compatible with fastboot. The question is, is it really a Samsung or is it just wearing the Samsung name?
Sent from my SM-S767VL using Tapatalk
A couple days ago my mobile data just stopped working. I had a couple updates I had been ignoring because it would remove the root. I finally gave in and ran the updates. Data returned. Root gone. I connected to my home computer to begin the root process, but my phone would not be recognized by the PC and would not show anything related except that it was charging. It's a new cable, barely used. I tried on my work computer with a different cable and still nothing except "charging". To the best of my knowledge, it connected to my computer just fine prior to the updates.
I've checked Developer Options for anything that says "USB". Toggled USB debugging, revoked authorizations, etc. "Select USB Configuration" is a weird one, all I have are: "Charging", "MTP", "PTP", RNDIS (USB Eathernet)", and "MIDI". But in "Default USB Configuration" I have: "No data transfer", "File transfer / Android Auto", "MIDI", "PTP", "USB tethering". I've selected every option, but (again) no reaction from my phone or PC.
My final options are wipe and reset, or take it to a store; I'm wanting to avoid both of these if possible. Does anyone have an idea of what else I can try?
Maybe try this?
[LIVE-ISO][mAid][v4.0] manage all your Android devices without driver hassle
is now: (read here why) About The existence of mAid (abbreviation for [m]anage your [A]ndro[id]) has a simple reason. I wanted to have something where I were able to point users to when they came with issues on Windows because the most...
forum.xda-developers.com
It's a Usb bootable LiveISO linux distro with all android drivers supported. Might help get your phone detected. Haven't used it so don't know if it'll work for you.
Is your phone booting? Why do you need a connection to PC?
IamTheBRAVE said:
Maybe try this?
[LIVE-ISO][mAid][v4.0] manage all your Android devices without driver hassle
is now: (read here why) About The existence of mAid (abbreviation for [m]anage your [A]ndro[id]) has a simple reason. I wanted to have something where I were able to point users to when they came with issues on Windows because the most...
forum.xda-developers.com
It's a Usb bootable LiveISO linux distro with all android drivers supported. Might help get your phone detected. Haven't used it so don't know if it'll work for you.
Is your phone booting? Why do you need a connection to PC?
Click to expand...
Click to collapse
I'll take a look at that tonight.
To answer your questions, phone boots and everything else seems to operate just fine. Just checked and boot screen says "Orange State Your device has been unlocked and can no longer be trusted", then like 30 seconds later it boots. It no longer has root after the updates and the only way I know to do it is through adb and fastboot commands. But also I backup my photos to my home PC when it gets pretty full. Also, also I occasionally do mobile development at home and test things on my phone.
The orange state is when it's bootloader unlocked. So that's normal. To root, you would indeed need an adb connection even when using the patching boot method.
I just remembered something. Go to your pc, look for a file in Users> your username > .android (hidden folder) > adb.key.
Even when you revoke authorisation from the phone, if that file still exists, the pc still sees 2 different keys so it won't allow it. So see if you can delete it.
Are you on win10 or sbove? It sometimes won't let you connect "untrusted" devices. Hope it helps.
IamTheBRAVE said:
The orange state is when it's bootloader unlocked. So that's normal. To root, you would indeed need an adb connection even when using the patching boot method.
I just remembered something. Go to your pc, look for a file in Users> your username > .android (hidden folder) > adb.key.
Even when you revoke authorisation from the phone, if that file still exists, the pc still sees 2 different keys so it won't allow it. So see if you can delete it.
Are you on win10 or sbove? It sometimes won't let you connect "untrusted" devices. Hope it helps.
Click to expand...
Click to collapse
Ya, I wasn't too worried about the bootloader message, just being thorough. I'll try the android folder at home also, but for what it's worth I don't have anything android-related on my work computer and it doesn't connect either.
Both are Win10
In device manager in win10, do you have any yellow triangle next to android drivers? What are the drivers you installed for your phone?
IamTheBRAVE said:
In device manager in win10, do you have any yellow triangle next to android drivers? What are the drivers you installed for your phone?
Click to expand...
Click to collapse
Phone doesn't show anywhere in Device Manager, and no yellow triangles. IIRC, drivers were installed by my phone when I plugged it in at home. I actually don't remember the last time I plugged into my pc at work before now.
Then look for your brand's android drivers and install them. I think that's the issue. Plugging the phone alone would install generic android drivers not your specific ones.
Short version: Nothing worked.
I had already tried searching for "oneplus 9 drivers". The main site doesn't offer anything, so there are a couple search results that really feel like scam sites. But they're the top results, so maybe I'm wrong. I installed the results from the search, and also searched xda and the one result I found.
I downloaded the ISO for mAid. Ran it in a VM. I couldn't really figure out what to do in it to troubleshoot. I was also discouraged because if my computer won't recognize the device, then why would the device show up in a VM?
I found and removed adbkey and adbkey.pub from "Users\<me>\.android\".
I had a brief bit of hope. I doubt the drivers caused it, so I'll probably remove those again. I got the device to appear in Device Manager but with a yellow triangle. It only seemed to happen when switching between "No data transfer" and "File transfer / Android Auto". The device was displayed as "Unknown USB Device (Device Descriptor Request Failed)". I doubt that provides much help though.
Have you tried clearing out the dust bunny's in the usb port on phone?
Keep the device in file transfer mode and with a yellow triangle. That's better than nothing.
I found this. Try and install it. (Also, doesn't this forum have a sticky thread for drivers? I have the 9pro btw)
Download Official OnePlus USB Drivers - GSM USB Drivers
Looking for official OnePlus USB Drivers? Then you can download Official OnePlus USB Driver for your Android Smartphone and tablet here.
gsmusbdrivers.com
MrSteelX said:
Have you tried clearing out the dust bunny's in the usb port on phone?
Click to expand...
Click to collapse
Yup. Folded some paper after the previous stuff. A little bit came out, but not so much that I'd think it's the issue. I have a floss stick thing, but it was a bit thicker and was moving the piece inside the slot.
IamTheBRAVE said:
Keep the device in file transfer mode and with a yellow triangle. That's better than nothing.
I found this. Try and install it. (Also, doesn't this forum have a sticky thread for drivers? I have the 9pro btw)
Download Official OnePlus USB Drivers - GSM USB Drivers
Looking for official OnePlus USB Drivers? Then you can download Official OnePlus USB Driver for your Android Smartphone and tablet here.
gsmusbdrivers.com
Click to expand...
Click to collapse
I'm new to XDA, but from what I've seen there's only a sticky for OS Builds
tconn said:
I'm new to XDA, but from what I've seen there's only a sticky for OS Builds
Click to expand...
Click to collapse
Took a look on OP9 forum, doesn't look like there is one. We have that on OP9Pro. Here's a link to the drivers, should work for you i think.
10.26 MB file on MEGA
mega.nz
You can use this thread as tutorial for root (you don't need all parts of it)
[GUIDE] [Magisk] [Unlock / ROOT / Keep Root] OOS 13.1.0.500
Different variants of Magisk that are available for use : Magisk Variant Stable / Beta / Canary Release Official Android / OOS OOS 11 and above Maintainer topjohnwu Project Link GitHub Zygisk No...
forum.xda-developers.com
"Device Descriptor request failed" tells you that the very first step of USB enumeration failed.
So you're talking about flakey cable, bad connection, interference OR the device was not initialized properly.
So try different ports, different computers, something different.
The first step is getting it to the point where it connects solidly (even if it can't/won't find a driver).
Unfortunately you can't tell Windows to use common sense and install a WinUSB driver. That's why we have Zadig: https://zadig.akeo.ie/
Unfortunately (again), adb.exe expects the correct DeviceInterfaceGUID. Ok, you can patch adb.exe or you can use Zadig with a custom .cfg file to specify the DIGUID.
Here is an example .cfg file. You'll have to fill in the VID/PID/MI if you ever get your phone to connect solidly and you can see that info in the DeviceManager.
So, go to Zadig, select Device > Load Preset File, select Options > List all devices, find your device and hit install.
Code:
[device]
Description="Standard Google Device"
VID=0x18d1
PID=0x4ee7
MI=0x00
GUID="{f72fe0d4-cbcb-407d-8814-9ed673d0dd6b}"
Good luck.
Dang... I think it's the dust bunnies. I have to push the cord in pretty hard, but it'll connect. So either bunnies or I don't know if the port itself gets displaced over time. Used an air compressor to blow out a bit, might try a bit more tomorrow. Thanks for everyone's help!
tconn said:
Dang... I think it's the dust bunnies. I have to push the cord in pretty hard, but it'll connect. So either bunnies or I don't know if the port itself gets displaced over time. Used an air compressor to blow out a bit, might try a bit more tomorrow. Thanks for everyone's help!
Click to expand...
Click to collapse
Try using a toothpick. Just try not to bend port too much.
The mystery: I cannot establish a USB connection between my Pixel 7 Pro (Android 13) and PC (Windows 11). When I try, the PC makes that characteristic "connected device" sound, but Windows Explorer doesn't discover the Pixel, nothing shows up anywhere in the Windows Device Manager, and the ADB command
.\fastboot device
returns nothing. The Pixel is similarly not discoverable as a bluetooth device to the PC, although it IS to other devices (like my earbuds).
This is the first task I have attempted since I performed a factory reset (and walked through the automated Pixel setup process) last night. I have spent the last three and a half hours reading Android forums, testing USB port-cable permutations, and installing and uninstalling drivers. There is no obvious solution to this problem within the first ten pages of Google search results. I would be beyond grateful for any possible insight, but please, take a moment to review what I have attempted already before you expend any effort helping me troubleshoot.
The Pixel CAN connect to an older laptop running Windows 10, appearing both in the Windows Device Manager (which says my drivers are up to date) and in File Explorer (where I can access the internal memory). But ADB similarly returns nothing on the ADB
.\fastboot devices
command. Also, my old phone (a Samsung Galaxy S20 FE 5G running Android 13) connects fine--both by USB and by bluetooth--to all three devices.
So the PC (Windows 11) connects to the Galaxy and the laptop (Windows 10) connects to the Pixel (kinda), which fairly well eliminates the possibility of an issue related to my hardware or USB cables. But the PC (Windows 11) won't connect to the Pixel--not anymore. Everything worked just fine when I unlocked the Pixel's bootloader a few weeks ago.
What I need now is to recover the functionality of the USB and bluetooth connectivities between the Pixel and the PC running Windows 11, especially for file transfers. For several reasons, WiFi reliant solutions are untenable for my situation. I also need to re-lock the bootloader by any method (not necessarily with the PC). As mentioned above, ADB has not succeeded in finding the device on either platform.
Finally, in case it's relevant: when I open the Pixel's USB Preferences menu, I cannot switch from "USB controlled by...This device" to "USB controlled by...Connected device"--in both cases, the Pixel returns a "couldn't switch" dialogue. And yes, I have of course enabled USB debugging.
If you took the time to comb through all those particulars, Thank you. I'm getting desperate for some thoughtful expertise, and while I'm open to retrying anything for the fifth or sixth time, (maybe I somehow missed the magic driver package), it is a special kind of tribulation to review the same tired list of perfunctory solutions to a different problem. I promise, the solution I need isn't one of the usual suspects.
I spent $800 on this device. That's a lot of money for me. It feels absurd and unfair that such a basic functionality--one that far more affordable devices have been delivering reliability for decades--should be missing from the Pixel 7 Pro. Please please please help me!
Ummm, USB debugging is not only what is needed here. While you are in developer settings scroll down to "Default USB configuration" and tap on it directly. Then you will see a number of choices. I think the top one titled "File transfer / Android Auto" is the one you need. Or maybe try PTP???
Let us know if this helps.
jaseman said:
Ummm, USB debugging is not only what is needed here. While you are in developer settings scroll down to "Default USB configuration" and tap on it directly. Then you will see a number of choices. I think the top one titled "File transfer / Android Auto" is the one you need. Or maybe try PTP???
Let us know if this helps.
Click to expand...
Click to collapse
Thanks for your speedy reply! I had File transfer / android Auto selected, but then switching to P2P allowed me to review the internal storage! I can't believe it. However I still need to figure a way to get ADB to find the device so I can lock the bootloader, and i still can't figure out how to solve the Bluetooth connectivity..
GodieDan said:
Thanks for your speedy reply! I had File transfer / android Auto selected, but then switching to P2P allowed me to review the internal storage! I can't believe it. However I still need to figure a way to get ADB to find the device so I can lock the bootloader, and i still can't figure out how to solve the Bluetooth connectivity..
Click to expand...
Click to collapse
Have you tried putting in Fastboot mode and then connect to computer?
schmeggy929 said:
Have you tried putting in Fastboot mode and then connect to computer?
Click to expand...
Click to collapse
Putting what in fastboot mode?
GodieDan said:
Putting what in fastboot mode?
Click to expand...
Click to collapse
Your phone in Fastboot Mode aka bootloader Mode.
Uninstall any previous android USB driver you have installed, and install the official Google USB driver instead. You need to install it two times probably. First in Android mode and second in bootloader mode, after all that it should show up correctly. If not, check your cable and PC USB port
If possible, give a lsusb output on your PC, see if the phone's there or not
yurishouse said:
Uninstall any previous android USB driver you have installed, and install the official Google USB driver instead. You need to install it two times probably. First in Android mode and second in bootloader mode, after all that it should show up correctly. If not, check your cable and PC USB port
If possible, give a lsusb output on your PC, see if the phone's there or not
Click to expand...
Click to collapse
I'm sorry, i don't understand what you mean when you say install it in android mode or bootloader mode?
Yeah, you probably just need to install the official USB driver from Google. That was a problem that numerous people had when the Pixel 7 series first released.
GodieDan said:
I'm sorry, i don't understand what you mean when you say install it in android mode or bootloader mode?
Click to expand...
Click to collapse
So you trying to unlock the Bootloader and you don't even know what Bootloader mode or Fastboot is? Maybe you should do some reading first. What do you mean by absurd that the Pixel doesn't have basic functionality? You said you have no problem with a Windows 10 computer, Windows 11 is the problem not the phone. Again I would do some reading on XDA, especially the guides on unlocking and rooting, because you don't seem to have a clue on what you are doing.
schmeggy929 said:
So you trying to unlock the Bootloader and you don't even know what Bootloader mode or Fastboot is? Maybe you should do some reading first. What do you mean by absurd that the Pixel doesn't have basic functionality? You said you have no problem with a Windows 10 computer, Windows 11 is the problem not the phone. Again I would do some reading on XDA, especially the guides on unlocking and rooting, because you don't seem to have a clue on what you are doing.
Click to expand...
Click to collapse
If you look at his second post (#3 of this thread) he says he wants to "lock" his bootloader not unlock it. Unless of course it was a typo. Maybe we should point him to the thread, Help I've bricked my device now what do I do".
yeah...the "absurdity" doesn't fall on the Google Pixel in this case, but with Microsoft Windows...
So, the first thing you need to do is see what is the device being identified as in Device Manager -- it easily could be "Unknown Device" or even identified as something totally different & wrong (Samsung android device, MTP device, etc.). Regardless, it NEEDS to be identified as Android Composite ADB Interface (and Android Bootloader Interface when in Bootloader Mode). When this was happening to many members in the main rooting thread on this forum, it was determined that you can't simply just "Uninstall" it, but you also need to "delete device driver" as well (if option is available)! Most users are able to simply install the driver and sometimes just have to point it to the Google USB Windows Driver folder (that I hope you followed the suggestions of the other members in this thread and got it proper from the source from Google's developer's website), but I suggest going beyond it and pointing the device driver (Update, Browse My computer for drivers, Let me pick from a list, have disk, and choose the .inf file) to the exact .inf file.
Also, since it seems you aren't too experienced in all this, I really do suggest you use the official Google Android Flash Tool to re-lock your bootloader! There are countless members from the past 7 years that have HARD BRICKED their device because they have done things wrong -- the Android Flash Tool will do everything automatedly in the correct fashion as to not hard brick your device when re-locking the bootloader.
But you absolutely need to get your usb drivers correct in order for the tool to work...
schmeggy929 said:
So you trying to unlock the Bootloader and you don't even know what Bootloader mode or Fastboot is? Maybe you should do some reading first. What do you mean by absurd that the Pixel doesn't have basic functionality? You said you have no problem with a Windows 10 computer, Windows 11 is the problem not the phone. Again I would do some reading on XDA, especially the guides on unlocking and rooting, because you don't seem to have a clue on what you are doing.
Click to expand...
Click to collapse
We'll I'm certainly not above learning new vocabulary but but in this case I don't think the issue is having read too little. Do you mean recovery mode? So far there is no custom recovery available for the Pixel 7 Pro, but yes I did try with the phone in the stock recovery
I have read every relevant article on XDA and three other forums and nothing has helped so far. I promise you I would not have posted if I could find the solution elsewhere.
Also the phone doesn't work fine on the windows 10 system. I was able to view my files but I couldn't read, write or execute ADB commands. I do consider USB file transfer to be a basic functionality, and windows 11 is backwards compatible with every storage device since punch cards.
Anyways I'm no pro, but I have had success with rooted devices in the past. For my benefit it would be helpful to be assiduous with language choice.
.
H
bobby janow said:
If you look at his second post (#3 of this thread) he says he wants to "lock" his bootloader not unlock it. Unless of course it was a typo. Maybe we should point him to the thread, Help I've bricked my device now what do I do".
Click to expand...
Click to collapse
I there, yes, my objectitve was to lock the bootloader, not unlock it. However I got that part figured out at least, by getting the phone replaced (i had fortunately splurged on the extra protection). But also I never bricked my device, and as best I can tell, the issue at hand isn't related to the rooting, or everything would be working again with the new phone. I wanted to re-lock the bootloader because everything was just getting to be so unstable. This was never a problem on my Nexus 6p, but that was two devices ago. Also, is it just me, or are there generally fewer benefits to rooting than there were in the teenies?
Hi there
simplepinoi177 said:
yeah...the "absurdity" doesn't fall on the Google Pixel in this case, but with Microsoft Windows...
So, the first thing you need to do is see what is the device being identified as in Device Manager -- it easily could be "Unknown Device" or even identified as something totally different & wrong (Samsung android device, MTP device, etc.). Regardless, it NEEDS to be identified as Android Composite ADB Interface (and Android Bootloader Interface when in Bootloader Mode). When this was happening to many members in the main rooting thread on this forum, it was determined that you can't simply just "Uninstall" it, but you also need to "delete device driver" as well (if option is available)! Most users are able to simply install the driver and sometimes just have to point it to the Google USB Windows Driver folder (that I hope you followed the suggestions of the other members in this thread and got it proper from the source from Google's developer's website), but I suggest going beyond it and pointing the device driver (Update, Browse My computer for drivers, Let me pick from a list, have disk, and choose the .inf file) to the exact .inf file.
Also, since it seems you aren't too experienced in all this, I really do suggest you use the official Google Android Flash Tool to re-lock your bootloader! There are countless members from the past 7 years that have HARD BRICKED their device because they have done things wrong -- the Android Flash Tool will do everything automatedly in the correct fashion as to not hard brick your device when re-locking the bootloader.
But you absolutely need to get your usb drivers correct in order for the tool to work...
Click to expand...
Click to collapse
Howdy, thanks for this. I just wrote a long reply but I can't seem to find it now, so I'll go ahead and give you the upshot again.
In my device manager, i have located a driver called "Android ADB Interface" under the grouping of "LeMobile Android Device" (by itself), and sure enough, it has a yellow-triangle warning icon. Before I take any action, i want to be clear -- your advice is that I uninstall the driver AND delete it manually? The context menu gives me the option to update the driver (when I search automatically, windows tells me the best drivers are already installed), disable device and uninstall device. Do you suggest I choose uninstall and then download the correct driver? If so, please would you provide me with the right link? I know from recent experience that there are a lot of drivers out there which look pretty good, and obviously none of them have worked doe me
GodieDan said:
Hi there
Howdy, thanks for this. I just wrote a long reply but I can't seem to find it now, so I'll go ahead and give you the upshot again.
In my device manager, i have located a driver called "Android ADB Interface" under the grouping of "LeMobile Android Device" (by itself), and sure enough, it has a yellow-triangle warning icon. Before I take any action, i want to be clear -- your advice is that I uninstall the driver AND delete it manually? The context menu gives me the option to update the driver (when I search automatically, windows tells me the best drivers are already installed), disable device and uninstall device. Do you suggest I choose uninstall and then download the correct driver? If so, please would you provide me with the right link? I know from recent experience that there are a lot of drivers out there which look pretty good, and obviously none of them have worked doe me
Click to expand...
Click to collapse
It might help to show what it states in the "Device status" in Properties.
But, regardless of what it says, YES uninstall the driver AND delete it manually. Windows automatically searching is usually wrong more often than not in my experience -- but especially in the case of special hardware connected to the computer.
Again, when reconnecting the device and after it installs the (most likely wrong) driver, please heed what I stated before:
simplepinoi177 said:
...Most users are able to simply install the driver and sometimes just have to point it to the Google USB Windows Driver folder (that I hope you followed the suggestions of the other members in this thread and got it proper from the source from Google's developer's website), but I suggest going beyond it and pointing the device driver (Update, Browse My computer for drivers, Let me pick from a list, have disk, and choose the .inf file) to the exact .inf file.
Also, since it seems you aren't too experienced in all this, I really do suggest you use the official Google Android Flash Tool to re-lock your bootloader! There are countless members from the past 7 years that have HARD BRICKED their device because they have done things wrong -- the Android Flash Tool will do everything automatedly in the correct fashion as to not hard brick your device when re-locking the bootloader.
But you absolutely need to get your usb drivers correct in order for the tool to work...
Click to expand...
Click to collapse
You are correct that there are multiple sources for the drivers and adb/fastboot -- ultimately the best place to get them is direct from Google's android developers website. For Windows USB drivers; here is the link from this website: https://developer.android.com/studio/run/win-usb
Just extract the .zip to a folder, and refer to that folder when doing the aforementioned steps I laid out (in orange)...
hope this helps...!
simplepinoi177 said:
It might help to show what it states in the "Device status" in Properties.
But, regardless of what it says, YES uninstall the driver AND delete it manually. Windows automatically searching is usually wrong more often than not in my experience -- but especially in the case of special hardware connected to the computer.
Again, when reconnecting the device and after it installs the (most likely wrong) driver, please heed what I stated before:
You are correct that there are multiple sources for the drivers and adb/fastboot -- ultimately the best place to get them is direct from Google's android developers website. For Windows USB drivers; here is the link from this website: https://developer.android.com/studio/run/win-usb
Just extract the .zip to a folder, and refer to that folder when doing the aforementioned steps I laid out (in orange)...
hope this helps...!
Click to expand...
Click to collapse
Wow, thank you for the speedy reply!
1. Having splurged on the protection plan, yesterday i went to best buy and replaced my device, and I'm no longer interested in messing with the bootloader. So where ADB is concerned, I don't need it. What i DO need is the functionality of making file transfers between my PC and my phone. Do you still suggest I look for the ADB driver on the developer website, or is there something more basic (and hopefully reliable)?
2. The device status reads:
"
The device cannot start. (Code 10)
The specified request is not a valid operation for the target device.
"
I spent a few minutes googling around about those errors, no luck yet.
3. It would be straightforward to uninstall (or disable) the device, but when I do, I worry it will be difficult to locate where the drivers are hiding (to delete manually). Under the "Driver" tab I clicked "Driver Details" and found the directories for three files, winusb.sys and two .dll files. Are these the culprits? Might there be others anywhere?