Related
I installed the Stable Android 10 on my GM1910 via TWRP, totally forgetting about maintaining root and TWRP.
So how do I bring back TWRP and root?
fastboot boot doesn't seem to work, I managed to pull the boot.img and patch it with Magisk from another device but flashing it through fastboot ends up in an endless bootanimation.
Could anyone help me? here's a link of the boot.img i pulled, it works if you flash it without magisk patching it.
Link: https://drive.google.com/file/d/1O8lF1UDwwu0zT8ro5Q1gKKfdxF-HGPEW/view?usp=sharing
(Almost) exactly the same here. I tired flashing a patched boot.img, it actually boots - but magisk manager gets stuck on the splash screen and some apps, including chrome, won't start. Trying to boot TWRP results in the phone getting stuck on the "fastboot mode" screen.
My only solution would be to downgrade, root, keep the upgrade this time. But because my ISP is doing some maintenance work I don't have wifi - and restoring my phone through mobile data does not seem to work correctly.
EDIT: In fastboot, neither bootloader version nor baseband version are show, product name is "msmnile". Has this always been that way?
EDIT 2, solution:
I extracted the boot.img from the device, and patched it using magisk on the same phone:
https://drive.google.com/file/d/1-Gf-6iXSFuYT5xDR-mnLKANvkXUHal9e/view?usp=sharing
Run this command in fastboot so you know which is the CURRENT active slot :
Code:
fastboot getvar current-slot
Run this command so you can flash the correct slot :
Code:
fastboot flash boot_X magisk_patched.img
replace X with the a or b from the command before.
:good:
dmj0shu4 said:
I installed the Stable Android 10 on my GM1910 via TWRP, totally forgetting about maintaining root and TWRP.
So how do I bring back TWRP and root?
fastboot boot doesn't seem to work, I managed to pull the boot.img and patch it with Magisk from another device but flashing it through fastboot ends up in an endless bootanimation.
Could anyone help me? here's a link of the boot.img i pulled, it works if you flash it without magisk patching it.
Link: https://drive.google.com/file/d/1O8lF1UDwwu0zT8ro5Q1gKKfdxF-HGPEW/view?usp=sharing
Click to expand...
Click to collapse
Hi sorry to hear that you got this problem and hopefully it gets fixed. I have another question: does that mean using TWRP to completely clean the device then installing Android 10 via zip will remove TWRP and fastboot everything? Does that mean after installing, everything will be refreshed like a box opened phone?
dmj0shu4 said:
I installed the Stable Android 10 on my GM1910 via TWRP, totally forgetting about maintaining root and TWRP.
So how do I bring back TWRP and root?
fastboot boot doesn't seem to work, I managed to pull the boot.img and patch it with Magisk from another device but flashing it through fastboot ends up in an endless bootanimation.
Could anyone help me? here's a link of the boot.img i pulled, it works if you flash it without magisk patching it.
Link: https://drive.google.com/file/d/1O8lF1UDwwu0zT8ro5Q1gKKfdxF-HGPEW/view?usp=sharing
Click to expand...
Click to collapse
If you have an endless boot animation you might be trying to boot from the wrong slot, try using the fastboot set_active command to change slot, then restart
h0l said:
Run this command in fastboot so you know which is the CURRENT active slot :
Run this command so you can flash the correct slot : replace X with the a or b from the command before.
:good:
Click to expand...
Click to collapse
I got a bit confused.
If the current slot is boot_a, i flash it in boot_b or am I supposed to flash on the one that isn't the current slot?
djsubterrain said:
If you have an endless boot animation you might be trying to boot from the wrong slot, try using the fastboot set_active command to change slot, then restart
Click to expand...
Click to collapse
Which is the default active slot? Is it okay to use either of the 2?
dmj0shu4 said:
Which is the default active slot? Is it okay to use either of the 2?
Click to expand...
Click to collapse
Either one should work if the rom and the rooted boot image is on it (If you are rooting). That's why you should install using TWRP, if you look in the reboot menu it will show you the active slot.
djsubterrain said:
Either one should work if the rom and the rooted boot image is on it (If you are rooting). That's why you should install using TWRP, if you look in the reboot menu it will show you the active slot.
Click to expand...
Click to collapse
I would've used TWRP but it won't let me boot into it
fastboot boot [recovery.img] does not seem to work for android 10, atleast on my case
dmjoshu4 said:
I got a bit confused.
If the current slot is boot_a, i flash it in boot_b or am I supposed to flash on the one that isn't the current slot?
Click to expand...
Click to collapse
You are supposed to flash it in the one that IS the active one. Because you do want to root the slot that you'll be booting.
does that mean using TWRP to completely clean the device then installing Android 10 via zip will remove TWRP and fastboot everything? I.e. everything will be refreshed like a box opened phone?
gh279760559 said:
does that mean using TWRP to completely clean the device then installing Android 10 via zip will remove TWRP and fastboot everything? I.e. everything will be refreshed like a box opened phone?
Click to expand...
Click to collapse
not everything, just twrp and root will be gone if you restarted without installing magisk to the inactive slot
h0l said:
(Almost) exactly the same here. I tired flashing a patched boot.img, it actually boots - but magisk manager gets stuck on the splash screen and some apps, including chrome, won't start. Trying to boot TWRP results in the phone getting stuck on the "fastboot mode" screen.
My only solution would be to downgrade, root, keep the upgrade this time. But because my ISP is doing some maintenance work I don't have wifi - and restoring my phone through mobile data does not seem to work correctly.
EDIT: In fastboot, neither bootloader version nor baseband version are show, product name is "msmnile". Has this always been that way?
EDIT 2, solution:
I extracted the boot.img from the device, and patched it using magisk on the same phone:
https://drive.google.com/file/d/1-Gf-6iXSFuYT5xDR-mnLKANvkXUHal9e/view?usp=sharing
Run this command in fastboot so you know which is the CURRENT active slot :
Code:
fastboot getvar current-slot
Run this command so you can flash the correct slot :
Code:
fastboot flash boot_X magisk_patched.img
replace X with the a or b from the command before.
:good:
Click to expand...
Click to collapse
dude, thanks for this, i was banging my head against a wall trying to get root to work. I used your patched boot img and i had the version mismatch, but i local updated my android and it has root!
dmj0shu4 said:
I would've used TWRP but it won't let me boot into it
fastboot boot [recovery.img] does not seem to work for android 10, atleast on my case
Click to expand...
Click to collapse
I have not been able to boot TWRP either in fastboot mode - got stuck at "OnePlus Logo FastBoot" black screen.
Hi guys.. can you post the steps in rooting android 10??
I've already had bootloader unlocked.
Do i need to.follow the steps intended for android 9??
Like
1. Install TWRP via fastboot.. (2files)
2. Reboot to twrp.
3. Flash magisk via twrp??
Is that it?? If so. Then after reading this thread.. some of. You mentioned about boot. Img?? Patched?? What's that supposed to mean?? Sir??
Thanks. Any advice is highly appreciated..
---------- Post added at 08:30 AM ---------- Previous post was at 08:28 AM ----------
And by the way..
Im on Gm1910 model. Global rom. Gm21AA build.. if that info would matter.. i dont actually need the root on android 9. Coz parallel app is working.. but now in android 10. It isnt working.. so.i need to root to grant su to game guardian.. thanks..
MigbyPie said:
I have not been able to boot TWRP either in fastboot mode - got stuck at "OnePlus Logo FastBoot" black screen.
Click to expand...
Click to collapse
Same.
I've read that Q/10 is different and you can't install TWRP like that anymore. Supposedly you need to use the MSM tool or the all-in-one tool but I've tried both of those and still can't boot to TWRP.
E30Nova said:
Same.
I've read that Q/10 is different and you can't install TWRP like that anymore. Supposedly you need to use the MSM tool or the all-in-one tool but I've tried both of those and still can't boot to TWRP.
Click to expand...
Click to collapse
Hopefully there will be a solution. I had tried to update from Pie to Q10 while staying rooted and it didn't work. So I had to wipe the whole device and decided to wait for a smoother root method for my device. If you have any other ideas about rooting Q10 let me know. Thank you
h0l said:
(Almost) exactly the same here. I tired flashing a patched boot.img, it actually boots - but magisk manager gets stuck on the splash screen and some apps, including chrome, won't start. Trying to boot TWRP results in the phone getting stuck on the "fastboot mode" screen.
My only solution would be to downgrade, root, keep the upgrade this time. But because my ISP is doing some maintenance work I don't have wifi - and restoring my phone through mobile data does not seem to work correctly.
EDIT: In fastboot, neither bootloader version nor baseband version are show, product name is "msmnile". Has this always been that way?
EDIT 2, solution:
I extracted the boot.img from the device, and patched it using magisk on the same phone:
https://drive.google.com/file/d/1-Gf-6iXSFuYT5xDR-mnLKANvkXUHal9e/view?usp=sharing
Run this command in fastboot so you know which is the CURRENT active slot :
Code:
fastboot getvar current-slot
Run this command so you can flash the correct slot :
Code:
fastboot flash boot_X magisk_patched.img
replace X with the a or b from the command before.
:good:
Click to expand...
Click to collapse
You saved my life! Thank you!
But how do we get twrp now? Is there any way?
Me too. Use tool all in one but it doesnt work. Stuck at "waiting twrp boots".
Any help, thanks.
Same here any Solution?
Sent from my GM1911 using Tapatalk
---------- Post added at 08:14 AM ---------- Previous post was at 08:14 AM ----------
Stuck at Fastboot booting when flashed img and also zip
Sent from my GM1911 using Tapatalk
I updated my phone to 10 last night, followed the same guide as I have for every other update but this time I lost root for some reason.
I still have TWRP recovery on there but it can't read internal storage so I can't flash Magisk.
I tried changing file system to ext 2 then back to 4 and then repairing it as I read elsewhere and this wiped the phone obviously but internal storage seemed to be working until I set the phone up again, downloaded Magisk, rebooted to recovery and I'm back where I started, internal storage showing as 0mb in TWRP.
Any ideas how to fix?
Hi there just incase someone else who had problems [like me]
who is hesitant or looking for a guide on how to install Blu_Spark TWRP and Root the device.
The guide below will work 99.9% of the time. just follow the instructions carefully
Necessary Files:
Install OnePlus 6 Driver
Install Fastboot Drivers
TWRP Image
Magisk 20.1
twrp-3.3.1-x_blu_spark_v9.107_op6
Stock boot image thanks [URL="https://forum.xda-developers.com/member.php?u=6994095" @Akhil701[/URL]
Step 1: [dont do this if you have installed ADB and Fastboot already]
Install Oneplus 6, ADB and Fastboot Drivers from the link above
* Reboot PC after installing
Step 2:
Put
Code:
Stock Boot Image [boot.img]
twrp-3.3.1-x_blu_spark_v9.107_op6.zip and
Magisk-v20.1.zip
on your internal storage
Also Put
Code:
twrp-3.3.1-11-enchilada-Q-mauronofrio.img
on your desktop
Step 3: Reboot device in fastboot/bootloader mode
Step 4: Connect Device to PC Via USB Cable
Step 5: On your desktop Press Shift Right Click then click the [Open Command Prompt Here]
Step 6: on the CMD Windows Type
Code:
fastboot devices
Press enter and see if your device shows up.
Step 7: type in the CMD Window
Code:
fastboot flash boot twrp-3.3.1-11-enchilada-Q-mauronofrio.img
press enter then after that on your phone screen use volume up or down button to reboot to recovery
Step 8:
Once you have the TWRP Screen
flash the stock boot image [boot.img] in boot partition [DO NOT Reboot!]
now go back and flash the Blu_Spark TWRP and then reboot to recovery
Step 9: Rooting
Flash Magisk 20.1.zip then reboot to system.
Thats it! no data will be wiped as long as your bootloader is already unlocked.
thanks to
@Funk Wizard for the initial instruction on how to install twrp and root
@eng.stk for the Blu_Spark TWRP
@mauronofrio for the initial TWRP Image
@Akhil701 for the stock boot.img
@remewer for inspiration to build this guide.
Patched boot.img or why we need the boot image after flashing OOS10 via local update?
Sh0X31 said:
Patched boot.img or why we need the boot image after flashing OOS10 via local update?
Click to expand...
Click to collapse
im not sure about that also. im just hesitant to skip that step. it might break something. thats why i added that step on this guide
Thnx, this was a very easy walkthrough.
Only thing I want to say is that not everyone knows how to flash the 'boot.img' through TWRP. Maybe you can explain that in more detail.
no patched boot.img you need
1. connect your OP6 to PC
2. flash TWRP (from mauronofrio) by fastboot from PC
3. reboot from fastboot to recovery
4. in TWRP flash stock img OOS, don´t reboot
5. in TWRP flash TWRP (blu_spark 9.107)
6- reboot to TWRP to another slot
7. in TWRP flash Magisk 20.1
8. reboot to system
I have noticed this too, probably they have changed somehow the system, even fastboot boot doesn't work anymore....
I had to install magisk via boot.img patching
Functionally on OOS 10.0.1 OP6 ?
So I was unable to flash the new OTA through twrp running on my rooted OP6.
As such, I opted to install the new OTA through the "local install" option.
That worked great. Settings area all the same. Bootloader still unlocked (I double checked).
Drivers are all installed on my Windows 10 PC.
However, no matter what I attempt to flash from command prompt I always get:
FAILED (remote: unkown command)
Does anyone know of a solution yet?
I have been reinstalling drivers and rebooting my PC with no luck thus far.
Any ideas?
Thanks in advance.
Update:
Whelp now that it is upgraded to Android 10 (and was wiped of all data when I locked and then unlocked the bootloader again) it will not allow me to downgrade back to Andriod 9 through the local upgrade option and since I can not get fastboot to accept any commands I am stuck now in Andriod 10 without the ability to change anything at the moment.
Brisky86 said:
So I was unable to flash the new OTA through twrp running on my rooted OP6.
As such, I opted to install the new OTA through the "local install" option.
That worked great. Settings area all the same. Bootloader still unlocked (I double checked).
Drivers are all installed on my Windows 10 PC.
However, no matter what I attempt to flash from command prompt I always get:
FAILED (remote: unkown command)
Does anyone know of a solution yet?
I have been reinstalling drivers and rebooting my PC with no luck thus far.
Any ideas?
Thanks in advance.
Update:
Whelp now that it is upgraded to Android 10 (and was wiped of all data when I locked and then unlocked the bootloader again) it will not allow me to downgrade back to Andriod 9 through the local upgrade option and since I can not get fastboot to accept any commands I am stuck now in Andriod 10 without the ability to change anything at the moment.
Click to expand...
Click to collapse
i knew it while reading but thanks to the screenshot you provided you saved me from sounding "user error" once again and piss of so many who prefer to blame things and others LOL
in short, wrong command, it's fastboot flash boot <image name>
BTW and since i'm already at it, if anyone has a Mac runniing 10.15 "Catalina" and fastboot is working from terminal, i'd like to learn how he/she's done it
just came to my mind to ask here since i have to use windows 10 under parallels desktop to fastboot flash my android stuff at the moment and of course that's just an "Emergency" choice for me, everyone using both platforms will understand
magnamentis said:
i knew it while reading but thanks to the screenshot you provided you saved me from sounding "user error" once again and piss of so many who prefer to blame things and others LOL
in short, wrong command, it's fastboot flash boot <image name>
BTW and since i'm already at it, if anyone has a Mac runniing 10.15 "Catalina" and fastboot is working from terminal, i'd like to learn how he/she's done it
just came to my mind to ask here since i have to use windows 10 under parallels desktop to fastboot flash my android stuff at the moment and of course that's just an "Emergency" choice for me, everyone using both platforms will understand
Click to expand...
Click to collapse
Wow. Okay.
This is becoming a comedy of errors on my part.
Oh boy now I am getting Qualcom flashdump messages...
Huh now it is just booting normal but not letting me get into the new recovery flash...
I got it all fixed.
Thank you everyone for your help and patience with my posts.
Does 10.0.1 still have the ability to do screen-off gestures for music? I like 10 but on my wife's 7t, either she didn't turn them on, our it didn't have them so I'm curious if there same thing is happening with this? I also noticed on her 7t, constant data problems when's switching from WiFi to data. Sometimes data won't come back and only a reboot solves. I know it's a bug on OOS 10 on 7t but wondering if it's a device specific bug or an Android 10 bug? Anyone having op6 issues with data not coming back when switching from WiFi?
WIFI problem solved!
Below OOS 10.0.1 back inTWRP
Wipe: cache, system and vendor
Flash OOS 10
Flash boot img
Flash TWRP
Flash Magisk
Reboot system
Reboot recovery
Flash OOS 10.0.1
Flash boot img
Flash TWRP
Flash Magisk
Reboot system
Wifi works
After rooting 10.0.1 with magisk 20.1 mobile network is gone. no sim pin, no metwork. after unroot everything is fine
Hello Mates,
i updated my rooted oneplus 6 from 10 to 10.01 and after that use this method to root again. But there is a Problem now: My WiFi doesnt work? I cant activate it.
Do anybody know how i can fix that Problem?
Thank you in Advance
Best Regards
Coktail
As above. No wifi, no sound. What's going on?
Coktail said:
Hello Mates,
i updated my rooted oneplus 6 from 10 to 10.01 and after that use this method to root again. But there is a Problem now: My WiFi doesnt work? I cant activate it.
Do anybody know how i can fix that Problem?
Thank you in Advance
Best Regards
Coktail
Click to expand...
Click to collapse
cubic25 said:
As above. No wifi, no sound. What's going on?
Click to expand...
Click to collapse
Look 2 posts up...
ryanallaire said:
Look 2 posts up...
Click to expand...
Click to collapse
Unroot doesn't work for me. Still no wifi and audio.
Hi guys, sorry to resurrect this thread. I did everything in the correct order using 10.0.3.0 and after step 8 (reboot after flashing blu_spark) my phone gets stuck on blu_spark splash screen without any option to boot into twrp. Normal boot results in bootloop... Any ideas? Do I need to use different versions of twrp.img and .zip?
dynamode said:
Hi there just incase someone else who had problems [like me]
who is hesitant or looking for a guide on how to install Blu_Spark TWRP and Root the device.
The guide below will work 99.9% of the time. just follow the instructions carefully
@Funk Wizard for the initial instruction on how to install twrp and root
@eng.stk for the Blu_Spark TWRP
@mauronofrio for the initial TWRP Image
@Akhil701 for the stock boot.img
@remewer for inspiration to build this guide.
Click to expand...
Click to collapse
Hello.
I´m on 10.3.0 op6, I followed all the steps and when i finish the step 8 and reboot, i stuck on the recovery message. I repeat all the steps flashing clean rom and always have the same problem.....
Can someone help me? Because i don´t know another way for installing magisc....
Thanks!!!
loggstar said:
Hi guys, sorry to resurrect this thread. I did everything in the correct order using 10.0.3.0 and after step 8 (reboot after flashing blu_spark) my phone gets stuck on blu_spark splash screen without any option to boot into twrp. Normal boot results in bootloop... Any ideas? Do I need to use different versions of twrp.img and .zip?
Click to expand...
Click to collapse
I am in exactly the same position here.
Followed all the steps and am now stuck on the blu_spark boot screen for the past 15 minutes
After flashing Lineage, the phone got stuck in an EDL loop after the initial reboot. Only sign on life is that it's recognized as a Qualcomm 9008 device in windows.
I did a full backup with EDL tools before getting started. Restoring this backup didn't resolve the issue. Also tried the reset command from edl-master; it executed successfully but the phone didn't wake up.
Anything else I should try?
Got the phone to work again. In case anyone else gets stuck in my position, here's what ultimately worked after lots of trial an error:
Downloaded the official Android 10 update from ZTE.
Extracted the payload using extract_android_ota_payload https://github.com/cyxx/extract_android_ota_payload
For some reason the extract would crap out in Windows; worked fine in Linux.
I then used the edl-master library to individually copy all the files to the device with _a and _b suffixes added. Most of the files go to lun4. There are 2 with the _a version in lun1 and the _b version in lun2. You can use the printgpt command to see which ones go where. After this the phone came back to life.
I was able to regain root by using Magisk to patch the boot image and then writing it back in EDL mode.
jc717 said:
Got the phone to work again. In case anyone else gets stuck in my position, here's what ultimately worked after lots of trial an error:
Downloaded the official Android 10 update from ZTE.
Extracted the payload using extract_android_ota_payload https://github.com/cyxx/extract_android_ota_payload
For some reason the extract would crap out in Windows; worked fine in Linux.
I then used the edl-master library to individually copy all the files to the device with _a and _b suffixes added. Most of the files go to lun4. There are 2 with the _a version in lun1 and the _b version in lun2. You can use the printgpt command to see which ones go where. After this the phone came back to life.
I was able to regain root by using Magisk to patch the boot image and then writing it back in EDL mode.
Click to expand...
Click to collapse
JC,
How were you able to get Magisk to patch the Android 10 boot image? I tried it, flashed the modded Boot IMG in EDL mode, and got the "Your device is corrupt. It cannpt be trusted and will no boot" message. I tried power cycling the phone and it went back to Bootlooping.
karlnorth said:
JC,
How were you able to get Magisk to patch the Android 10 boot image? I tried it, flashed the modded Boot IMG in EDL mode, and got the "Your device is corrupt. It cannpt be trusted and will no boot" message. I tried power cycling the phone and it went back to Bootlooping.
Click to expand...
Click to collapse
Is your bootloader unlocked?
jc717 said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
No. I can't figure out how to get the Bootloader to unlock on Android 10.0. Do you know of any way that I can revert to Android 9.x US build?
karlnorth said:
No. I can't figure out how to get the Bootloader to unlock on Android 10.0. Do you know of any way that I can revert to Android 9.x US build?
Click to expand...
Click to collapse
I've achieved an unlocked bootloader! Now I'm trying to figure out how to revert to a US build of Android 9.0
Could you please possibly elaborate on what you mean by the edl master library? Sorry, I have never had to work with edl type stuff before. I successfully extracted the payload I'm just not sure where to go from there. Thank you.
jc717 said:
Got the phone to work again. In case anyone else gets stuck in my position, here's what ultimately worked after lots of trial an error:
Downloaded the official Android 10 update from ZTE.
Extracted the payload using extract_android_ota_payload https://github.com/cyxx/extract_android_ota_payload
For some reason the extract would crap out in Windows; worked fine in Linux.
I then used the edl-master library to individually copy all the files to the device with _a and _b suffixes added. Most of the files go to lun4. There are 2 with the _a version in lun1 and the _b version in lun2. You can use the printgpt command to see which ones go where. After this the phone came back to life.
I was able to regain root by using Magisk to patch the boot image and then writing it back in EDL mode.
Click to expand...
Click to collapse
how did you flash it back to the devices
and do you have the file for edl now
i am stuck in to edl and alot of trial for flashing the rom get error
jc717 said:
After flashing Lineage, the phone got stuck in an EDL loop after the initial reboot. Only sign on life is that it's recognized as a Qualcomm 9008 device in windows.
I did a full backup with EDL tools before getting started. Restoring this backup didn't resolve the issue. Also tried the reset command from edl-master; it executed successfully but the phone didn't wake up.
Anything else I should try?
Click to expand...
Click to collapse
Hi jc717,
I am same situation you described, i was tried restore from my EDL backup but didn't work. How can fix this, could you explain simple as step by step for beginners, thanks.
Hi,
I'm trying to boot a twrp image on my Motorola One Vision without flashing it or rooting the phone. Reason is I want to try it out and also tweek som files but not necessarily rooting it.
I've unlocked the boot loader and enabled developer options and set USB to debugging. When I connect the phone to the computer and use ./adb devices it is detected fine. When I disconnect, reboot and enable fastboot I get the fast boot menu with the options but when I connect it to the computer it will not detect the phone. ./adb devices give no output and ./fastboot boot /PATH/TO/IMAGE.FILE just gives the output "waiting for device". I've tried this from both my windows partition and Linux Debian with the same result. Cables are fine as I can use adb to pull files and such. It's basically in the fastboot menu that it doesn't seem to respond.
The phone is running Android 10 Kane 4.14. I've tried twrp 3.4 but I don't think the image is the issue since it won't respond to commands in fastboot.
Does anyone have any suggestions for troubleshooting this? Any and all help is appreciated.
Kind regards
Magnus
Ps: Posted this a few days ago in the general Q&A as a suspect it's not necessarily a specific One Vision problem but it didn't get any replies so I'll try here. Sorry if it's a bit of a double post. ds-
I've made some headway and manage to reboot and connect but when I try to ./fastboot boot IMAGE I get the message Validation image failed.
If I understood it correct it's not possible to boot an image in this way which is of an earlier version than the one installed. Is this correct?
I''ve got 4.4 installed, and the image is 3.4.
/Magnus
Cardinal_Vice said:
I've made some headway and manage to reboot and connect but when I try to ./fastboot boot IMAGE I get the message Validation image failed.
If I understood it correct it's not possible to boot an image in this way which is of an earlier version than the one installed. Is this correct?
I''ve got 4.4 installed, and the image is 3.4.
/Magnus
Click to expand...
Click to collapse
Did you flash the patched vbmeta image?
ttomovcik said:
Did you flash the patched vbmeta image?
Click to expand...
Click to collapse
No, I can't get that to work. I'm not sure if I understand where I should place it.
Appreciate that you pitch in.
I have a One Vision x1907-1 variant and recently it bricked. The device can't be recognized and don't works with the motorola drivers . So it's similar issue maybe
mjraogr said:
I have a One Vision x1907-1 variant and recently it bricked. The device can't be recognized and don't works with the motorola drivers . So it's similar issue maybe
Click to expand...
Click to collapse
No, my phone works perfectly fine. I just can't flash the vbmeta image and I can't run the .bat file.
I have tried to unlock the bootloader using adb and fastboot which happened successfully. Then i tried to install TWRP and flash it using recovery_a and recovery_b and boot however it didn't work. So i assumed i can just go back to the device. However then i am just stuck at the bootloop in fastboot mode forever. I tried to even flash the stock OTA but didn't work. Can someone please help me recovering my phone. I have used all my savings into buying this phone with 12GB and 256GB Ram. Any help would be greatly appreciated. and I have tried to unbrick my device as well, but that didn't work either.
Nm
apologies for the lack of information. One plus 8 pro is the device which i am using.