Related
Hi everyone,
I was hoping someone might have some advise for me to try. I did the following and now I can't seem to boot the ROM I installed and/or load the partitions to wipe them. TWRP is asking for a password (which I just cancel) and then it can't mount the partitions. Here is what I did.
unpacked the tablet and started it up. Put my Wi-Fi and google account on it and updated the firmware.
I then downloaded the ASUS unlock application and unlocked my bootloader. It shows as unlocked now when starting up.
I installed TWRP (Latest version) via fastboot.
I created a backup with TWRP.
I installed a custom ROM.
Restarted
System not booting. I attempted to recover from backup and/or wipe the partitions and it won't mount them. also TWRP asks for a password and I just cancel out of it. I believe you know the symptoms.
I then read that maybe an older version of TWRP would work. I tried 2.3.3.0 I believe and it had the exact same affect. I installed it via fastboot as well.
Any advise would be appreciated. Thank you. The custom ROM I installed has a filename of cm-4.4.2-20131226-cmb4. I think it's a CM mod file. Thanks so much for your time. Someone is helping me on the side via PM, if I get anywhere with that, I'll post the resolution here.
-Tony
qzmicro said:
The custom ROM I installed has a filename of cm-4.4.2-20131226-cmb4. I think it's a CM mod file.
Click to expand...
Click to collapse
The file cm-4.4.2-20131226-cmb4 is for Verizon HTC One only and not for the ASUS TF700T.
You must download the CM from this site: Link
I run my TF700T with CM11 (nightly build) and with TWRP 2.6.3.2.
Regards
Matthias
Any suggestions?
manhart said:
The file cm-4.4.2-20131226-cmb4 is for Verizon HTC One only and not for the ASUS TF700T.
You must download the CM from this site: Link
I run my TF700T with CM11 (nightly build) and with TWRP 2.6.3.2.
Regards
Matthias
Click to expand...
Click to collapse
Thanks for the reply but the ROM I used is indeed for the TF700T mode. The exact filename is cm-4.4.2-20131226-cmb4.4-tf700t-rc3.zip. As you can see my device model is in the filename. I also only downloaded ROMS that are form this forum (TF700.) Any suggestions?
-Tony
qzmicro said:
Thanks for the reply but the ROM I used is indeed for the TF700T mode. The exact filename is cm-4.4.2-20131226-cmb4.4-tf700t-rc3.zip. As you can see my device model is in the filename. I also only downloaded ROMS that are form this forum (TF700.) Any suggestions?
-Tony
Click to expand...
Click to collapse
That is a rom based on CM11 kitkat. Did you read the requirements (which the cmb creators unfortunately just touch upon in their op) before you flashed it?
The CM11 OP states that you have to be on 10.16.1.14.x bootloader and CWM 6.0.4.4 as a recovery.
It also clearly states that TWRP has problems with KitKat. Supposedly the latest TWRP version works, but to my knowledge that is not confirmed. Don't know what TWRP version you initially flashed, but then you flashed one that's totally outdated and possibly not even compatible with your bootloader.....
I hope you still have access to fastboot.... download CWM 6.0.4.4. and flash it. Then try to flash the rom again.
But check your bootloader version first!
Read this: http://forum.xda-developers.com/showthread.php?t=1957660
Now I can't seem to erase certain partitions or write to system...
Hi everyone,
So, I tried to erase all partitions using fastboot and then install the asus firmware blob back on my system to see if I can get it back to where it was. At this point I can't seem to write to the system partition. I get a failed error on fastboot and a failed command error on my tablet. Any suggestions? Is there any way to install a bootloader with fastboot? I suspect it's the bootloader as it is still ASUS's stock bootloader. I would like to change it to something that may be able to write and wipe the partitions properly using CWM or something similar. Please advise, I'm running out of options here. I'd hate to think I bricked my first device ever... thanks so much for your time. Cheers.
-Tony
qzmicro said:
Hi everyone,
So, I tried to erase all partitions using fastboot and then install the asus firmware blob back on my system to see if I can get it back to where it was. At this point I can't seem to write to the system partition. I get a failed error on fastboot and a failed command error on my tablet. Any suggestions? Is there any way to install a bootloader with fastboot? I suspect it's the bootloader as it is still ASUS's stock bootloader. I would like to change it to something that may be able to write and wipe the partitions properly using CWM or something similar. Please advise, I'm running out of options here. I'd hate to think I bricked my first device ever... thanks so much for your time. Cheers.
-Tony
Click to expand...
Click to collapse
You do have fastboot access? If you enter
Code:
fastboot devices
in the cmd prompt, does it return the serial number of your device.
If not, you may have a driver problem on your PC.
The only method I know of to get a bootloader via fastboot is to flash the system blob, but you seem to have tried that already. The question is: How?
Please post the commands you used and the output you get back.
You also may want to look at buster99's method:
http://forum.xda-developers.com/showthread.php?t=2179759&page=2
It's been a single ? since I started using fastboot.
berndblb said:
You do have fastboot access? If you enter
Code:
fastboot devices
in the cmd prompt, does it return the serial number of your device.
If not, you may have a driver problem on your PC.
The only method I know of to get a bootloader via fastboot is to flash the system blob, but you seem to have tried that already. The question is: How?
Please post the commands you used and the output you get back.
You also may want to look at buster99's method:
http://forum.xda-developers.com/showthread.php?t=2179759&page=2
Click to expand...
Click to collapse
I've installed fastboot on two separate systems (both windows 8.1 64-bit) and both have drivers installed (device manager shows it installed fine.) Since I started using fastboot it simply shows a ? instead of my device's serial number. Could this be the issue from the start? I was able to install TWRP with it, so I assumed it worked. * Sigh * I should know better. (I kept moving forward once I saw TWRP installed) Would it surprise you to know I'm a network engineer?
I put up a windows 7 system at this point to see if I have a better time with fastboot and the drivers simply aren't recognized, even when I install the asus software that has the drivers (Asus pad pc suite.)
How can I get just the raw drivers for my system to use with fastboot? Either for Windows 8 or 7. Any help would be appreciated, thank you for your time.
-Q
qzmicro said:
I've installed fastboot on two separate systems (both windows 8.1 64-bit) and both have drivers installed (device manager shows it installed fine.) Since I started using fastboot it simply shows a ? instead of my device's serial number. Could this be the issue from the start? I was able to install TWRP with it, so I assumed it worked. * Sigh * I should know better. (I kept moving forward once I saw TWRP installed) Would it surprise you to know I'm a network engineer?
I put up a windows 7 system at this point to see if I have a better time with fastboot and the drivers simply aren't recognized, even when I install the asus software that has the drivers (Asus pad pc suite.)
How can I get just the raw drivers for my system to use with fastboot? Either for Windows 8 or 7. Any help would be appreciated, thank you for your time.
-Q
Click to expand...
Click to collapse
Ain't computers great? If you are a network engineer you should be used to this! LOL!
On Win 8 there's some nasty stuff where you have to turn off "windows driver verification" or some such in system settings - just google "Windows 8 fastboot" and you should find the necessary steps.
The attached drivers work fine for me with Win 7 (forgot which one's I installed). Try the Universal Naked Drivers first and uninstall the ones you have now prior to installing these.
But one thing is for sure: ? is not an acceptable return for "fastboot devices"
Edit: XDA won't let me upload the Google Universal Naked Drivers, so download them from here:
http://forum.xda-developers.com/showthread.php?t=2263822
I would try these first, then the adb recovery driver I attached as a zip
Drivers are installed now and stilll ? for fastboot devices.
berndblb said:
Ain't computers great? If you are a network engineer you should be used to this! LOL!
On Win 8 there's some nasty stuff where you have to turn off "windows driver verification" or some such in system settings - just google "Windows 8 fastboot" and you should find the necessary steps.
The attached drivers work fine for me with Win 7 (forgot which one's I installed). Try the Universal Naked Drivers first and uninstall the ones you have now prior to installing these.
But one thing is for sure: ? is not an acceptable return for "fastboot devices"
Edit: XDA won't let me upload the Google Universal Naked Drivers, so download them from here:
http://forum.xda-developers.com/showthread.php?t=2263822
I would try these first, then the adb recovery driver I attached as a zip
Click to expand...
Click to collapse
Hi, so I installed the naked drivers and they seemed to work. Once that was done, I used fastboot devices and got a questionmark again. Please keep in mind that since the tablet was out of the box, I have only seen a ?. I don't believe that this issue is related to the other only because it's been consistently ? the whole time, across 3 workstations. I can now erase the system partition but can't seem to write to it. I guess it would help to resolve the drivers issue but I am not sure how. Naked drivers are installed. commands like erase and reboot tend to work properly. write worked the first time as well but since then I cannot write to certain partitions. Any ideas how I might resolve the ? issue in fastboot devices?
-Tony
qzmicro said:
Hi, so I installed the naked drivers and they seemed to work. Once that was done, I used fastboot devices and got a questionmark again. Please keep in mind that since the tablet was out of the box, I have only seen a ?. I don't believe that this issue is related to the other only because it's been consistently ? the whole time, across 3 workstations. I can now erase the system partition but can't seem to write to it. I guess it would help to resolve the drivers issue but I am not sure how. Naked drivers are installed. commands like erase and reboot tend to work properly. write worked the first time as well but since then I cannot write to certain partitions. Any ideas how I might resolve the ? issue in fastboot devices?
-Tony
Click to expand...
Click to collapse
I have never heard of this issue.....
Please post the fastboot commands you are using.
Liunx Mint 32 bit
You need Linux Mint 32 bit, to have a fighting chance of solving this issue...Let me know if I can help... Thx, the cmb team, and lj50036
I will document what I have done so far, step by step.
berndblb said:
I have never heard of this issue.....
Please post the fastboot commands you are using.
Click to expand...
Click to collapse
I'll post shortly what I have done and how it went down. Specifically the commands used in fastboot as that is the ONLY tool I've used so far besides the ASUS Unlock Tool. Standbye...
-Tony
I'll be installing linux mint 32 on a VM....
lj50036 said:
You need Linux Mint 32 bit, to have a fighting chance of solving this issue...Let me know if I can help... Thx, the cmb team, and lj50036
Click to expand...
Click to collapse
@lj50036:
I would love to try anything... even if it's just for educational purposes.
Can I install Linux Mint on a VM? If so, I'll have this done soon and get back to you. If not, please let me know and I can put up a physical machine with it. Thanks. Cheers.
At this point it seems by biggest problem is that I can't write to the damn system partition... Fastboot is all I have used to modify the tablet but it has never shown my serial number. Is this what we are trying to address with mint? Would you mind giving me some more info while I get this done is possible. Thank you.
-Tony
UPDATE: Here is all the commands I've tried on my Tablet...
Originally I did this:
unpacked the tablet and started it up. Put my Wi-Fi and google account on it and updated the firmware.
I then downloaded the ASUS unlock application and unlocked my bootloader. It shows as unlocked now when starting up.
I installed TWRP (Latest version) via fastboot.
I created a backup with TWRP.
I installed a custom ROM.
Restarted
System not booting. I attempted to recover from backup and/or wipe the partitions and it won't mount them. also TWRP asks for a password and I just cancel out of it. I believe you know the symptoms.
I then read that maybe an older version of TWRP would work. I tried 2.3.3.0 I believe and it had the exact same affect. I installed it via fastboot as well.
Since then I've tried this:
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system blob (blob was in same directory as fastboot and I got it form the latest asus firmware zip file) <-- Failed It sends the data okay but fails to write to the disc. Error on ASUS tablet in red also confirms the command write:system failed and gives a memory address.
fastboot -i 0x0B05 reboot
Please note that some of the erase commands simply hung. I had to restart the tablet to go back into fastboot mode. When I restart it sometimes they erase successfully. Not sure why. I know I couldn't erase userdata at all, and recently tried again and it worked.
I now have a copy of Mint Linux 32-bit ready to go. What should I try?
-Tony
VM Mint
qzmicro said:
@lj50036:
I would love to try anything... even if it's just for educational purposes.
Can I install Linux Mint on a VM? If so, I'll have this done soon and get back to you. If not, please let me know and I can put up a physical machine with it. Thanks. Cheers.
At this point it seems by biggest problem is that I can't write to the damn system partition... Fastboot is all I have used to modify the tablet but it has never shown my serial number. Is this what we are trying to address with mint? Would you mind giving me some more info while I get this done is possible. Thank you.
-Tony
Click to expand...
Click to collapse
I can not say about VM. I have not done that because I have lots of hard drives, so I cant give any feedback about VM and if that will work. I would say to stay away from VM but thats just me... So really what we need is like a 80 gig or bigger hard drive you can just slap mint 32 bit on... If you need any help with this just let me know.. Just to clarify, have enable nvflash?? you can send me a email at [email protected]
lj50036 said:
I can not say about VM. I have not done that because I have lots of hard drives, so I cant give any feedback about VM and if that will work. I would say to stay away from VM but thats just me... So really what we need is like a 80 gig or bigger hard drive you can just slap mint 32 bit on... If you need any help with this just let me know.. Just to clarify, have enable nvflash?? you can send me a email at [email protected]
Click to expand...
Click to collapse
Done. I have mint installed on an x86 system. No VM. I figured why risk it. What can I do from here? Install fastboot and try again from this platform? Do I need to install drivers for my tablet? If so, manufactureres website best ones to use? I'm ready to do this... and praying...
-Tony
P.s. I do not believe I have NVFLASH. I had firmware that didn't alow for it, so I just did the Asus Unlock Tool. Please refer to my previous message about anything/everything I've done so far. Cheers.
qzmicro said:
Done. I have mint installed on an x86 system. No VM. I figured why risk it. What can I do from here? Install fastboot and try again from this platform? Do I need to install drivers for my tablet? If so, manufactureres website best ones to use? I'm ready to do this... and praying...
-Tony
Click to expand...
Click to collapse
Open a terminal window and type fastboot, it will not be installed but it will prompt you how to get it...do the same for adb just type adb and will prompt..... Than boot your tablet into fastboot.... Connect it to your mint pc and type fastboot devices see what it says......
Just to clarify you do have a unlocked bootloader, yes??
EDIT TYPE----- sudo fastboot devices
lj50036 said:
Open a terminal window and type fastboot, it will not be installed but it will prompt you how to get it...do the same for adb just type adb and will prompt..... Than boot your tablet into fastboot.... Connect it to your mint pc and type fastboot devices see what it says......
Just to clarify you do have a unlocked bootloader, yes??
EDIT TYPE----- sudo fastboot devices
Click to expand...
Click to collapse
Roger that. ... and yes, I do have an unlocked boot loader. It's the factory ICS from what I understand. Unlocked with the ASUS Unlocker Tool. it completed successfuly. It states it is unlocked when I boot the device. I'll let you know what happenes in an hour or two. I have to finish some work. Thank you, I'll post shortly.
-Tony
Great
qzmicro said:
Roger that. ... and yes, I do have an unlocked boot loader. It's the factory ICS from what I understand. Unlocked with the ASUS Unlocker Tool. it completed successfuly. It states it is unlocked when I boot the device. I'll let you know what happenes in an hour or two. I have to finish some work. Thank you, I'll post shortly.
-Tony
Click to expand...
Click to collapse
Sounds great!!! No worries on a time.. Just let me know... Thx lj
Linux Mint still shows ?????? as my serial.
lj50036 said:
Sounds great!!! No worries on a time.. Just let me know... Thx lj
Click to expand...
Click to collapse
So, I installed fastboot and ADB and installed all updates on the OS for kicks. Then tried the fastboot devices command and I recieved:
Code:
[email protected] ~ $ fastboot devices
no permissions fastboot
[email protected] ~ $ sudo fastboot devices
[sudo] password for amascolo:
???????????? fastboot
[email protected] ~ $
...? Still no serial number. I've seen this since I took it out of the box. Not sure what that is all about, I have found no one else with this issue. I'm going to try to flsh and I'll let you know what happens.
-Tony
UPDATE: I have tried to re-flash the damn thing and it still fails. Here is what I see...
Code:
[email protected] / $ sudo fastboot -i 0x0B05 flash staging /home/amascolo/Desktop/blob
sending 'staging' (800927 KB)...
OKAY [135.763s]
writing 'staging'...
FAILED (remote: ()
finished. total time: 136.934s
[email protected] / $
Any ideas fellas? Seems I simply am not able to write to the system partition again.
-Tony
* SIGH *
Anyone have any ideas as to why I can't write to my device? Any ideas as to what I may try? Please advise, I'm not looking forward to throwing this thing away. Cheers.
-Tony
Hello everyone. I am trying to root and flash my TF300T for the first time, and I am running into some problems.
I downloaded the unlocking tool from asus and that seemingly worked fine.
Now however when I try to boot into recovery mode, the android just falls down and gives me an error message. I am able to boot into the standard android mode without an issue. I tried to root with kingo which seemed to work as I can access the SuperSM.
I downloaded Minimal ADB and Fastboot to try and flash a ROM but I cant see the device in flashboot but I can in adb. (Saw on a different thread that I need to be in recovery mode to see this?)
I downloaded the naked universal drivers and put on everything that said asus but that didnt help at all.
My main goal is to get lollipop on my tablet but I cant seem to make any headway. Can someone help point me in the right direction on what I am doing wrong or what I should do next? Any help would be appreciated. Thanks.
Terry_Tsang said:
Hello everyone. I am trying to root and flash my TF300T for the first time, and I am running into some problems.
I downloaded the unlocking tool from asus and that seemingly worked fine.
Now however when I try to boot into recovery mode, the android just falls down and gives me an error message. I am able to boot into the standard android mode without an issue. I tried to root with kingo which seemed to work as I can access the SuperSM.
I downloaded Minimal ADB and Fastboot to try and flash a ROM but I cant see the device in flashboot but I can in adb. (Saw on a different thread that I need to be in recovery mode to see this?)
I downloaded the naked universal drivers and put on everything that said asus but that didnt help at all.
My main goal is to get lollipop on my tablet but I cant seem to make any headway. Can someone help point me in the right direction on what I am doing wrong or what I should do next? Any help would be appreciated. Thanks.
Click to expand...
Click to collapse
Ok I was dumb and figured out the first half of my problem. I thought it had to boot into recovery mode to get the fast loader to work. Anyways now it lists my device when I type fastload device but when I try to flash twrp it gives me an error saying
Sending 'Recovery" <6800 KB> ...
Failed (command write failed(No such device or address))
Can someone please help? thanks
I guess you forgot "-i 0x0b05" in the command
it should look like this:
fastboot -i 0x0b05 flash recovery twrp.blob
if fastboot devices detects tablet then this should work.
AFAIK Asus is the only one brand that needs "-i [hex_ID]" even when it is the only fastboot device detected by "fastboot devices" command
Sent from my TF300T using XDA Free mobile app
th3cr0w said:
I guess you forgot "-i 0x0b05" in the command
it should look like this:
fastboot -i 0x0b05 flash recovery twrp.blob
if fastboot devices detects tablet then this should work.
AFAIK Asus is the only one brand that needs "-i [hex_ID]" even when it is the only fastboot device detected by "fastboot devices" command
Sent from my TF300T using XDA Free mobile app
Click to expand...
Click to collapse
That id string is a vendor code and all android vendors have one ....
It is not need to flash from fastboot, it is only for safety that you need to use the vendor id ....
Thx Josh
I remembered reading about that while performing nvflash backup - https://www.androidroot.mobi/pages/guides/tegra3-guide-nvflash-jellybean/
and then I remembered it didn't work for me without that vendor ID specified manually,
later on I rooted my cousin's Sony phone and that one did fastboot without -i option, so I concluded it must be asus specific "issue" - not to detect ID automatically or sth ....
Anyway @Terry_Tsang - If you have not tried like that, it is always worth a shot ;]
I have tried it with and without the -i tag and get the same error. I have a feeling my recovery file is corrupt as I get an error when I try to boot into that mode. I also now have a new error instead of unable to write, it says invalid argument.
Since I was able to root it with kingo, I tried the TWRP app but it also crashes when I try to do an install of TWRP through the app. I have no idea how to proceed.
I have tried, rooting with kingo and the commands. I have tried unrooting it. I have tried rooting then using ROM Manager and TWRP apps. I have no idea how to continue. I definately think something is wrong tho lol.
th3cr0w said:
I remembered reading about that while performing nvflash backup - https://www.androidroot.mobi/pages/guides/tegra3-guide-nvflash-jellybean/
and then I remembered it didn't work for me without that vendor ID specified manually,
later on I rooted my cousin's Sony phone and that one did fastboot without -i option, so I concluded it must be asus specific "issue" - not to detect ID automatically or sth ....
Anyway @Terry_Tsang - If you have not tried like that, it is always worth a shot ;]
Click to expand...
Click to collapse
Well its all good not a point of being right a point in giving good info ...
Here are the most use vendor codes not just an Asus thing ?
https://gist.github.com/lj50036/3b30ecc420b5838646be
Thx Josh
---------- Post added at 09:43 PM ---------- Previous post was at 09:40 PM ----------
Terry_Tsang said:
Hello everyone. I am trying to root and flash my TF300T for the first time, and I am running into some problems.
I downloaded the unlocking tool from asus and that seemingly worked fine.
Now however when I try to boot into recovery mode, the android just falls down and gives me an error message. I am able to boot into the standard android mode without an issue. I tried to root with kingo which seemed to work as I can access the SuperSM.
I downloaded Minimal ADB and Fastboot to try and flash a ROM but I cant see the device in flashboot but I can in adb. (Saw on a different thread that I need to be in recovery mode to see this?)
I downloaded the naked universal drivers and put on everything that said asus but that didnt help at all.
My main goal is to get lollipop on my tablet but I cant seem to make any headway. Can someone help point me in the right direction on what I am doing wrong or what I should do next? Any help would be appreciated. Thanks.
Click to expand...
Click to collapse
You do not have to root to flash a recovery anyway ...
If you would like to look into this more shoot me an email at [email protected]
Thx Josh
Terry_Tsang said:
I have a feeling my recovery file is corrupt as I get an error when I try to boot into that mode. I also now have a new error instead of unable to write, it says invalid argument.
Click to expand...
Click to collapse
You did check the checksum of your download right?
hi guys,
i my shield is stuck on the nvidia logo when booting normally, if it brings up the bootloader, it shows unlocked but hitting continue caused it to freeze on the screen, recovery freezes on nvidia logo and fastboot protocol just brings it back to this screen. i orginally installed twrp and it confirmed successful flash of new os .... on reboot it bricked to its now state, i cant get into twrp or get my pc to see it to install a new copy
anyone got any ideas
thanks
@Fairmax don't click continue, it freezes because there is nothing to continue to, as long as you can enter bootloader your device isn't fully bricked. So, to fix your problem you will have to download official ROM from nvidia's site (https://developer.nvidia.com/shield-open-source find your model and click recovery images).
When you download latest ROM unzip it and follow the textual guide, but, there will be one file missing (i can't remember which one, user data maybe or something like that), don't worry and just continue with the next step. After you flash just reboot to system by holding power button. Good luck !
i cant seem to get it to be recognised by windows all i get is this-- Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.--
trying to install nvidia usb driver via have disk bring up an error that the file is not usable with x64 system
ok after many driver reinstall iv got device manager to say android adb interface but still not showing on on device list in cmd
Fairmax said:
ok after many driver reinstall iv got device manager to say android adb interface but still not showing on on device list in cmd
Click to expand...
Click to collapse
Which command did you type in?
fpozar said:
Which command did you type in?
Click to expand...
Click to collapse
adb devices shows no devices
i tried the 3 different option in the driver install which was android adb, bootloader, and something else and nothing shows in devices. i tried it on my laptop and a different cable and cant get adb to list the device :crying:
Fairmax said:
adb devices shows no devices
i tried the 3 different option in the driver install which was android adb, bootloader, and something else and nothing shows in devices. i tried it on my laptop and a different cable and cant get adb to list the device :crying:
Click to expand...
Click to collapse
Well of course adb devices shows no devices because you are not actually in adb mode, you are in the bootloader mode. Just download minimal fastboot and adb, install it and extract recovery image into the folder where you installed minimal adb and fastboot (you don't need any other drivers).After you did this and your device is in bootloader and connected, click on the path in your fastboot & adb folder and delete everything and type cmd. No need to do adb devices, just proceed with fastboot flash ...
fpozar said:
Well of course adb devices shows no devices because you are not actually in adb mode, you are in the bootloader mode. Just download minimal fastboot and adb, install it and extract recovery image into the folder where you installed minimal adb and fastboot (you don't need any other drivers).After you did this and your device is in bootloader and connected, click on the path in your fastboot & adb folder and delete everything and type cmd. No need to do adb devices, just proceed with fastboot flash ...
Click to expand...
Click to collapse
ah now that makes sence....silly me i dont do this very often . so fastboot saw device and iv uploaded all parts of the recovery image and rebooted but it is still stuck on the nvidia logo, that was the original file so now il try 5.2.0 and see if that works
Fairmax said:
ah now that makes sence....silly me i dont do this very often . so fastboot saw device and iv uploaded all parts of the recovery image and rebooted but it is still stuck on the nvidia logo, that was the original file so now il try 5.2.0 and see if that works
Click to expand...
Click to collapse
You can also try flashing twrp and then lineageos or something from twrp.
fpozar said:
You can also try flashing twrp and then lineageos or something from twrp.
Click to expand...
Click to collapse
good news after a few hours of trying (usb dropped connection a few times then battery died) it finally works again .....been over 2 years since iv had this shield running after nvidia did the recall , now goto put a different rom on there so it dosnt update and kill itself
Hello I had a similar issue with my k1 tablet and ended up flashing factory images via adb fastboot and all flashed fine. Now my tablet is stuck on the boot screen with the green and white nvidia logo. How long does it take to boot please?
I have same issue too. I can load TWRP and flash the other partitions but TWRP shows un-mountable partitions and even a full stock ROM flash will not allow it to boot. I have a similar issue with a recall tablet. what did you do to fix it?
usb debugging is enabled on device. running latest version of adb, fastboot. Have tried on both mac and win10 but same issue on both.
Oneplus 7 pro is running 10.3.0GM21AA
>fastboot devices
>adb devices
List of devices attached
966c8016 device
Trying to use fastboot to flash patched magisk img and install magisk.
Do you enter in fastboot in phone?
Sent from my GM1910 using Tapatalk
Yes tried from bootloader as well
fustyler said:
Yes tried from bootloader as well
Click to expand...
Click to collapse
bootloader-fastboot mode is the only time fastboot commands will work. I know you tried this "also". But I feel you are wasting your time trying to run fastboot when phone is booted (instead of focusing on the situation where fastboot should actually be working). adb and fastboot will not work at the same time by definition. Also, debugging does not need to be enabled for fastboot (only for adb).
redpoint73 said:
bootloader-fastboot mode is the only time fastboot commands will work. I know you tried this "also". But I feel you are wasting your time trying to run fastboot when phone is booted (instead of focusing on the situation where fastboot should actually be working). adb and fastboot will not work at the same time by definition. Also, debugging does not need to be enabled for fastboot (only for adb).
Click to expand...
Click to collapse
I have tried it from bootloader and still the same on my pc it just says waiting for device.
What else can I try?
fustyler said:
I have tried it from bootloader and still the same on my pc it just says waiting for device.
What else can I try?
Click to expand...
Click to collapse
Try a different cable, different USB port. Fastboot can be finicky sometimes. You can also go to Windows Device Manager, find the device, and see if you can manually select the drivers. There is a generic Android device driver that sometimes gets fastboot to work properly on some of my past devices. This is on Windows 7, haven't done this on WIn 10 yet, so not sure if it is exactly the same.
redpoint73 said:
Try a different cable, different USB port. Fastboot can be finicky sometimes. You can also go to Windows Device Manager, find the device, and see if you can manually select the drivers. There is a generic Android device driver that sometimes gets fastboot to work properly on some of my past devices. This is on Windows 7, haven't done this on WIn 10 yet, so not sure if it is exactly the same.
Click to expand...
Click to collapse
Have tried different cables and different machines both pc and mac
What's you gotta do is look up how to disable signature verification in Windows 10. Then once you done that stuff put your device in fastboot mode then on the window 10 PC open of device drivers find Android phone then bootloader update driver. There will be 2 choices for updating pick the on device one. Should do you right.
I had to do this after flashing the T-Mobile version to my international version with the msmtool and it locked my bootloader for me
Since adb is working, do an adb reboot bootloader and it'll then boot into fastboot. If you can't get a return on fastboot devices at this point, it could be you haven't oem unlocked your phone yet.
mnemesis said:
Since adb is working, do an adb reboot bootloader and it'll then boot into fastboot. If you can't get a return on fastboot devices at this point, it could be you haven't oem unlocked your phone yet.
Click to expand...
Click to collapse
I ran adb reboot bootloader from pc to boot phone into fastboot.
In the bootloader it states device state is unlocked
However fastboot devices ran from pc still shows no device.
billyt1 said:
What's you gotta do is look up how to disable signature verification in Windows 10. Then once you done that stuff put your device in fastboot mode then on the window 10 PC open of device drivers find Android phone then bootloader update driver. There will be 2 choices for updating pick the on device one. Should do you right.
I had to do this after flashing the T-Mobile version to my international version with the msmtool and it locked my bootloader for me
Click to expand...
Click to collapse
Thanks this fixed it.
Issue fixed by billyt1's comment above. case closed.
billyt1 said:
What's you gotta do is look up how to disable signature verification in Windows 10. Then once you done that stuff put your device in fastboot mode then on the window 10 PC open of device drivers find Android phone then bootloader update driver. There will be 2 choices for updating pick the on device one. Should do you right.
I had to do this after flashing the T-Mobile version to my international version with the msmtool and it locked my bootloader for me
Click to expand...
Click to collapse
This worked for me as well. Just to make it clear, rephrasing his reply. After disabling signature verification on windows 10, connect your phone in fastboot mode & open Device Manager on Windows & look for Other > Android device.If it is found, This means Windows 10 is not having proper drivers to recognize fastboot device. Now install "OnePlus_USB_Drivers_Setup.exe" & it will show pop up for installing driver & after accepting(this is blocked due to signature verification in normal situation), Android device will be recognized in fastboot mode.
Giri Prasad said:
This worked for me as well. Just to make it clear, rephrasing his reply. After disabling signature verification on windows 10, connect your phone in fastboot mode & open Device Manager on Windows & look for Other > Android device.If it is found, This means Windows 10 is not having proper drivers to recognize fastboot device. Now install "OnePlus_USB_Drivers_Setup.exe" & it will show pop up for installing driver & after accepting(this is blocked due to signature verification in normal situation), Android device will be recognized in fastboot mode.
Click to expand...
Click to collapse
ugh. I've tried all of these suggestions and still can't get the device listed in adb while in fastboot.
I even used the TOOL ALL IN ONE without success. Funny thing is, that program recognizes my phone being in fastboot and has it listed. But if I try to flash a recovery from there, it opens a command window and ultimately says there was an error in connecting to the device.
Any help is appreciated.
I have a similar problem. I tried to disable the signature. Installed a new Redmi Note 7 driver. The phone is recognized as an Android phone in the device manager. In Orangefox recovery it is recognized with ADB command. In fastboot it is not recognized. In Orangefox I can't format data. So my ROM is not booting up. So I want to flash fastboot ROM with Fastboot but in Fastboot device is not even recognized.
t
puyow18 said:
ugh. I've tried all of these suggestions and still can't get the device listed in adb while in fastboot.
I even used the TOOL ALL IN ONE without success. Funny thing is, that program recognizes my phone being in fastboot and has it listed. But if I try to flash a recovery from there, it opens a command window and ultimately says there was an error in connecting to the device.
Any help is appreciated.
Click to expand...
Click to collapse
Sorry on the late reply. Pretty sure you can only do fastboot boot boot(recovery).img or\and boot_a or boot_b. Wont let you fastboot flash boot.img.
billyt1 said:
What's you gotta do is look up how to disable signature verification in Windows 10. Then once you done that stuff put your device in fastboot mode then on the window 10 PC open of device drivers find Android phone then bootloader update driver. There will be 2 choices for updating pick the on device one. Should do you right.
I had to do this after flashing the T-Mobile version to my international version with the msmtool and it locked my bootloader for me
Click to expand...
Click to collapse
Thank you so much!
I also had same issue. my redmi note 6 pro and asus zenfone max pro m1 can be detected in adb but not in fastboot. tried everything. changing driver/disble signature verification. also tried virtual box ubuntu/window 7. but not succeeded. It is actually an issue with usb 3. so I bought usb 2 hub. now everything works fine.
Thank you Thank you Thank you Thank you Thank you Thank you...I have been fooling with this all day
Hi, I already solved this issue (but this only works for xiaomi phone (Redmi Note 7 to be specified), for other brands I think need to download your devices flasher/driver tool)
For Xiaomi user only
1. Download Mi Unlock Tool (https://mi-globe.com/download-xiaomi-mi-unlock-tool-all-versions/) (Version 4.5.813.51)
2. Extract the files anywhere you like
3. Run MiUsbDriver.exe to install the driver
4. Try fastboot devices command
I hope this helps you guys. The Mi Unlock Tool also useful to unlock device locked bootloader.
For other devices maybe can follow this tutorial
Fixed: Fastboot not detecting your Android device
Fix the Fastboot not detecting your device. If your device is not detected by the Fastboot then these tricks will really help you.
www.qasimtricks.com
Hello folks.
In my months-long quest to avoid turning an ASUS TF201 tablet into e-waste ...
I've searched, searched again, searched some more, and while I've found answers (none of which have worked), a lot of them seem to be dated, or depend on files that are no longer available for download, so I turn to you for suggestions.
Current state:
The tablet will not boot Android.
TWRP works fine.
The problem(s):
I am unable to flash the device with ASUS' official firmware. TWRP returns an error when the ASUS firmware runs its "checks," then fails.
I have tried Chrombi-KK, following the directions step by step, but a few strange things occur:
1. When flashing through TWRP (.zip images sitting on an SD card), everything completes with no errors, but on reboot, the tablet displays its ASUS logo, but does not boot into Android. I let it sit there for three hours today, and it just sat there, displaying the logo.
2. When trying to flash from ADB (TWRP update for example), it sits there endlessly at "< waiting for any device >". This is odd, because ADB's "reboot" commands works fine.
Now, I'm at a loss. The hardware seems fine, but I'm stuck ... and this is after months of trying, giving up, trying again etc.
Is this a lost cause?
Any help at all would be much appreciated. I've tried so many things, so many online "solutions," to no avail. So I turn to the experts as my Hail Mary pass before sending this to the eco centre.
Thanks for reading, and hopefully ... just maybe ... someone will have the magical set of instructions to get this thing working again.
The only command to verify whether an ADB / Fastboot connection got successfully established is
Code:
adb devices OR fastboot devices
The command
Code:
adb reboot
simply in Android's system file called build.prop (re-)sets flag ro.bootmode to normal what is read by bootloader when Android boots up.
jwoegerbauer said:
The only command to verify whether an ADB / Fastboot connection got successfully established is
Code:
adb devices OR fastboot devices
The command
Code:
adb reboot
simply in Android's system file called build.prop (re-)sets flag ro.bootmode to normal what is read by bootloader when Android boots up.
Click to expand...
Click to collapse
As it turns out, I had already stumbled upon your your "ADB-FASTBOOT-Installer" during a trip down one of the many rabbit holes trying to get this tablet working again.
adb devices returns:
List of devices attached0123456789ABCDEF recovery
adb reboot restarts the tablet, which I assume means the ASUS tablet driver is working.
I can't seem to do anything else with adb, however, such as push a new TWRP version, etc. This may be a key point, as it seems likely the version I have of TWRP may be too old to support upgrade using something like Chrombi-KK.
Is this a likely theory?
I would re-flash phone's Stock ROM to get rid off of all mofications applied so far to check for phone is working as expected.
NotTheLips said:
Hello folks.
In my months-long quest to avoid turning an ASUS TF201 tablet into e-waste ...
I've searched, searched again, searched some more, and while I've found answers (none of which have worked), a lot of them seem to be dated, or depend on files that are no longer available for download, so I turn to you for suggestions.
Current state:
The tablet will not boot Android.
TWRP works fine.
The problem(s):
I am unable to flash the device with ASUS' official firmware. TWRP returns an error when the ASUS firmware runs its "checks," then fails.
I have tried Chrombi-KK, following the directions step by step, but a few strange things occur:
1. When flashing through TWRP (.zip images sitting on an SD card), everything completes with no errors, but on reboot, the tablet displays its ASUS logo, but does not boot into Android. I let it sit there for three hours today, and it just sat there, displaying the logo.
2. When trying to flash from ADB (TWRP update for example), it sits there endlessly at "< waiting for any device >". This is odd, because ADB's "reboot" commands works fine.
Now, I'm at a loss. The hardware seems fine, but I'm stuck ... and this is after months of trying, giving up, trying again etc.
Is this a lost cause?
Any help at all would be much appreciated. I've tried so many things, so many online "solutions," to no avail. So I turn to the experts as my Hail Mary pass before sending this to the eco centre.
Thanks for reading, and hopefully ... just maybe ... someone will have the magical set of instructions to get this thing working again.
Click to expand...
Click to collapse
ok, so good thing is twrp boots, now again if you have box with wich the tablet come try to get correct model number and search for official frimware to flash through adb using flashall.cmd
again, if official rom is not installing don't worry flash THIS custom rom using TWRP make sure to wipe all before flashing.
jwoegerbauer said:
I would re-flash phone's Stock ROM to get rid off of all mofications applied so far to check for phone is working as expected.
Click to expand...
Click to collapse
As I mentioned: "I am unable to flash the device with ASUS' official firmware. TWRP returns an error when the ASUS firmware runs its "checks," then fails."
This is exactly what I'm trying to find a solution on how to do.
[email protected] said:
ok, so good thing is twrp boots, now again if you have box with wich the tablet come try to get correct model number and search for official frimware to flash through adb using flashall.cmd
again, if official rom is not installing don't worry flash THIS custom rom using TWRP make sure to wipe all before flashing.
Click to expand...
Click to collapse
Yes, thank goodness it's not completely bricked, haha.
I think the version of TWRP that's on there may be too old, and I'm having trouble pushing a newer version through ADB ... so this is the current hurdle I'm trying to overcome.
Might you happen to have a link to the ASUS TF201 drivers known to work in Windows 10, so I can rule that out? If I can't get ADB to push a newer TWRP version from Windows, I may give it a go in Linux too ... but I'm trying not to open up new avenues of complexity, so I've restricted all my efforts to Windows as that's where most of the online help I can find tends to take place.
Thanks!
Edit: Unfortunately, the download link to [ROM][N 7.1] KatKiss Nougat [TF201] no longer works:
404 Not Found
This has been another constant obstacle, i.e., recommended files to download are no longer available.
NotTheLips said:
As I mentioned: "I am unable to flash the device with ASUS' official firmware. TWRP returns an error when the ASUS firmware runs its "checks," then fails."
This is exactly what I'm trying to find a solution on how to do.
Click to expand...
Click to collapse
Nobody needs TWRP to re-flash a device's Stock ROM.
It's typically done via ADB Sideload method.
NotTheLips said:
Yes, thank goodness it's not completely bricked, haha.
I think the version of TWRP that's on there may be too old, and I'm having trouble pushing a newer version through ADB ... so this is the current hurdle I'm trying to overcome.
Might you happen to have a link to the ASUS TF201 drivers known to work in Windows 10, so I can rule that out? If I can't get ADB to push a newer TWRP version from Windows, I may give it a go in Linux too ... but I'm trying not to open up new avenues of complexity, so I've restricted all my efforts to Windows as that's where most of the online help I can find tends to take place.
Thanks!
Edit: Unfortunately, the download link to [ROM][N 7.1] KatKiss Nougat [TF201] no longer works:
404 Not Found
This has been another constant obstacle, i.e., recommended files to download are no longer available.
Click to expand...
Click to collapse
how you tried to flash stock rom, i mean do you boot into fastboot after booting into twrp or not?
jwoegerbauer said:
Nobody needs TWRP to re-flash a device's Stock ROM.
It's typically done via ADB Sideload method.
Click to expand...
Click to collapse
As I mentioned before, "2. When trying to flash from ADB (TWRP update for example), it sits there endlessly at "< waiting for any device >". This is odd, because ADB's "reboot" commands works fine."
[email protected] said:
how you tried to flash stock rom, i mean do you boot into fastboot after booting into twrp or not?
Click to expand...
Click to collapse
I've tried two methods.
The first is to try to flash it from TWRP, but this fails with an error. The stock ROM appears to be checking for dependencies, and it fails this check.
The second is to use ADB (fastboot) while the tablet is sitting in TRWP. It stalls at "< waiting for any device >".
So this the problem. Neither of those two methods work for the stock ROM.
With a third party ROM, TWRP appears to flash the device successfully (no errors or stalls). When I reboot the device, it will not boot Android, and gets stuck at the ASUS boot logo indefinitely.
I'm not sure what do next to get past these two problems.
NotTheLips said:
I've tried two methods.
The first is to try to flash it from TWRP, but this fails with an error. The stock ROM appears to be checking for dependencies, and it fails this check.
The second is to use ADB (fastboot) while the tablet is sitting in TRWP. It stalls at "< waiting for any device >".
So this the problem. Neither of those two methods work for the stock ROM.
With a third party ROM, TWRP appears to flash the device successfully (no errors or stalls). When I reboot the device, it will not boot Android, and gets stuck at the ASUS boot logo indefinitely.
I'm not sure what do next to get past these two problems.
Click to expand...
Click to collapse
here is the problem, ok so follow the steps carefully,
boot into twrp
then connect your phone to your pc
type "adb devices",
if some thing like 1234567890 -recovery shows up proceed else start-over,
after successfully detected by adb typed "adb reboot bootloader"
then after booting into fastboot mode type "fastboot device"
if something shows up proceed else tell me
make sure you have installed adb and fastboot properly,
after all this run the cmd file in stock rom, to automatically flash it.
[email protected] said:
here is the problem, ok so follow the steps carefully,
boot into twrp
then connect your phone to your pc
type "adb devices",
if some thing like 1234567890 -recovery shows up proceed else start-over,
after successfully detected by adb typed "adb reboot bootloader"
then after booting into fastboot mode type "fastboot device"
if something shows up proceed else tell me
make sure you have installed adb and fastboot properly,
after all this run the cmd file in stock rom, to automatically flash it.
Click to expand...
Click to collapse
Here's what happened:
C:\Windows\system32>adb devicesList of devices attached0123456789ABCDEF recoveryC:\Windows\system32>adb reboot bootloaderC:\Windows\system32>fastboot device< waiting for any device >It sits at < waiting for any device > indefinitely, until I reboot the device.
NotTheLips said:
Here's what happened:
C:\Windows\system32>adb devicesList of devices attached0123456789ABCDEF recoveryC:\Windows\system32>adb reboot bootloaderC:\Windows\system32>fastboot device< waiting for any device >It sits at < waiting for any device > indefinitely, until I reboot the device.
Click to expand...
Click to collapse
the problem is your pc does not have adb and fastboot properly installed
try this one https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790/
also, use this official driver https://www.asus.com/SupportOnly/Eee_Pad_Transformer_Prime_TF201/HelpDesk_Download/
if your pc is 64 bit use win764bit version
NotTheLips said:
Here's what happened:
C:\Windows\system32>adb devicesList of devices attached0123456789ABCDEF recoveryC:\Windows\system32>adb reboot bootloaderC:\Windows\system32>fastboot device< waiting for any device >It sits at < waiting for any device > indefinitely, until I reboot the device.
Click to expand...
Click to collapse
This "waiting for device" problem happens when the USB device node is not accessible to your current user. The USB id is different in Fastboot mode, so you can easily have permission to it in ADB but not in Fastboot.
Each manufacturer implements Fastboot differently. So, if not already done yet, download and install the suitable "Android USB Driver" provided by ASUS. Then Fastboot should work.
BTW: Your device actually stucks in recovery mode.
Is OEM Unlock got enabled in Android settings? If not, Fastboot never will work.