Database Info

[Guide]How to Root OnePlus 6 Guide! [Video Tutorial][Windows/Mac/Linux]

For those of you who want to root your OnePlus 6, here is the easiest root method even a 10-year old can follow that works on all Windows, Mac, and Linux. Now, before I begin, you will have to unlock the bootloader. If you have not unlocked your bootloader or don’t know what that is, please follow How to Unlock Bootloader on OnePlus 6 first!
Here's a full step-by-step video tutorial:
First, I want to thank those who made root tutorials but I found an easier way to root that does not involve switching any slots, took me a quite awhile to figure this out but well worth the effort. You only have to flash TWRP image to boot, then with TWRP flash boot.img, TWRP installer, and Magisk with this tutorial. You can do it easily on all Windows, Mac, Linux, or even Chromebook(just install Chrome ADB on Chrome Web store)
Special thanks to magnamentis, his method didn't work for me as I lost my Wifi but after few hours of tinkering, found you can just reflash boot.img then the TWRP installer zip file he provided, and voila! Flawless root everytime, I've tested this about 10 times now, thanks again for the post here:
https://forum.xda-developers.com/showpost.php?p=76687704&postcount=212
Step 1. Once you have unlocked your bootloader, make sure to SIGN IN as if you do not sign into your phone, you will end up in a nasty bootloop.
Step 2. Check your Android version in Settings->About Phone just in case you are reading this in the future when Android 9.0 comes out but this tutorial is future-proof and will work on future Android versions so long as you use the correct boot image file.
Step 3. Power off your phone and hold down Volume Up and Power buttons for about 3 seconds until you enter the Fastboot mode. When doing this, make sure your USB cable is disconnected otherwise you may enter another special mode for unbricking. If you mess up and get into that special mode, simply reboot your device by holding down Volume Down and Power buttons for about 20 seconds.
Step 4. Once in fastboot mode, connect a USB cable from your OnePlus 6 to your computer. You can use Windows, Mac, or Linux. For my video tutorial, I will be using Windows 10 but you can go ahead and use the substitute code for Mac or Linux as most of the steps are nearly identical.
Step 5. You will need to download:
NOTE: All the download links are at the BOTTOM OF THE PAGE, wait 5 secs and click on "CLICK HERE TO DOWNLOAD", don't click on the ads!!!
Download fastboot.zip:
https://download.highonandroid.com/file/Tools/fastboot.zip
Android USB Drivers for Windows:
https://download.highonandroid.com/file/Drivers/UniversalAdbDriverSetup.msi
Download Magisk:
https://download.highonandroid.com/file/Tools/Magisk/Magisk-v16.4.zip
Download TWRP image:
https://download.highonandroid.com/file/TWRP/OnePlus6/twrp-3.2.1-oneplus6.img
Download TWRP installer zip:
https://download.highonandroid.com/file/TWRP/OnePlus6/twrp-installer-oneplus6-3.2.1.zip
Download and boot.img for OnePlus 6T Android 8.1:
https://download.highonandroid.com/file/TWRP/OnePlus6/boot/8.1/boot.img
Step 6. If you have followed my bootloader unlock tutorial and installed drivers for Windows, you can skip that step. If not, you can go head and run the Android USB Driver program and install drivers. For Mac or Linux, no drivers are needed!
Step 7. Unzip fastboot.zip and move over the TWRP image file you downloaded earlier to the fastboot folder.
Step 8. Open a command prompt for Windows by typing “cmd” in the search bar. For Mac or Linux, open a terminal, if you don’t know how, please Google it.
Step 9. Type the following.
For Windows:
cd Downloads
cd fastboot
fastboot flash boot twrp twrp-3.2.1-oneplus6.img
For Mac:
cd Downloads
cd fastboot
chmod 755 *
./fastboot-mac flash boot twrp twrp-3.2.1-oneplus6.img
Note: CHMOD command basically changes file permissions so you can run the files.
For Linux:
cd Downloads
cd fastboot
chmod 755 *
sudo ./fastboot-linux flash boot twrp twrp-3.2.1-oneplus6.img
Note: CHMOD command basically changes file permissions so you can run the files.
This will flash the TWRP image to your boot partition. Normally, we can simply boot TWRP image but since we don’t have official TWRP recovery(as of writing this), you will have to flash TWRP image to the boot partition, which allows us to boot TWRP recovery.
Step 10. Choose “Recovery” using the Volume keys and hit Power button to enter TWRP recovery.
Step 11. Recovery will probably be in Chinese, hit the “Read Only” button, top button on left middle.
Step 12. You can change the language back to English by hitting the second box from bottom right then hit the globe icon on top right.
Step 13. Go back to your computer and copy over the TWRP install zip file, Magisk zip file, and boot.img file.
Step 14. You don’t need the USB cable connected anymore. Go ahead and install the boot.img file using the image option in Install menu. This will flash back your regular boot image to the boot partition.
Step 15. Next, install the TWRP install zip and Magisk zip file. This will give you permanent TWRP recovery and full root.
Step 16. Reboot and you should see everything working including WiFi, 4G LTE, yadayadayada. Open Magisk Manager app and find you have full root with SafetyNet pass also so you can hide root.
Verify you have full root by installing Titanium Backup app(free app) on the Play Store, you should see a Superuser request window.
That’s it! Enjoy folks!

OnePlus 6T? How is this supposed to be easier? You have sixteen steps here. The other method from wuxianlin is very simple I did it in five minutes with no issues at all including WiFi still working. And how can you say you don't have to switch slots. It is required to flag TWRP to both a and b for it to work properly. You don't even mention that in this tutorial.

se7ensde said:
OnePlus 6T? How is this supposed to be easier? You have sixteen steps here. The other method from wuxianlin is very simple I did it in five minutes with no issues at all including WiFi still working. And how can you say you don't have to switch slots. It is required to flag TWRP to both a and b for it to work properly. You don't even mention that in this tutorial.
Click to expand...
Click to collapse
I got lost trying to do that root method, I was following this one here:
https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-unlock-bootloader-flash-twrp-t3792643
But yeah you don't have to switch slots for my root tutorial, which can cause havoc if you flash to the wrong one. If you don't believe me just watch the video. It doesn't hurt to have multiple root methods so long as they work. But my Wifi kept dying everytime I used the slot switch method until I found this way to do it.
I am only trying to make a tutorial that even a kid follow but I've broken down a few steps into maybe 10+ steps, probably helpful for noobs who are trying to root. If you are advanced XDA user, great job though, took me a few hours myself to get a flawless root method. Believe me, I love shortcuts and any method that works the first time out but sucks if people don't explain every little detail as not everyone is an expert. I've been rooting phones for awhile now and it was not easy task with OP6.

Can i use this method over patched boot image? I now rooted from https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-magisk-root-oos-5-1-5-t3794440 this guide…i wonder

galza said:
Can i use this method over patched boot image? I now rooted from https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-magisk-root-oos-5-1-5-t3794440 this guide…i wonder
Click to expand...
Click to collapse
Yes, since this root method flashes a stock boot image after installing TWRP, you can follow it fine. But make a backup of everything just in case.
Basically, this root method, you flash TWRP to boot partition, then flash stock boot image in TWRP, flash TWRP installer for permanent TWRP, then flash Magisk, and reboot. It's actually just 4 steps, I had to make it much longer for noobs because they will mess up.

zedomax said:
Yes, since this root method flashes a stock boot image after installing TWRP, you can follow it fine. But make a backup of everything just in case.
Basically, this root method, you flash TWRP to boot partition, then flash stock boot image in TWRP, flash TWRP installer for permanent TWRP, then flash Magisk, and reboot. It's actually just 4 steps, I had to make it much longer for noobs because they will mess up.
Click to expand...
Click to collapse
I didn't have to switch slots to root at all and I used the very first method to gain root that was posted here on op6 forums.
https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-magisk-root-oos-5-1-5-t3794440

se7ensde said:
I didn't have to switch slots to root at all and I used the very first method to gain root that was posted here on op6 forums.
https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-magisk-root-oos-5-1-5-t3794440
Click to expand...
Click to collapse
Yes, that root method is great but it does not give you TWRP recovery, meaning you can't install custom ROMs with it. But if you need TWRP recovery, you will need to install TWRP recovery thru one of the tutorials here.

zedomax said:
Yes, that root method is great but it does not give you TWRP recovery, meaning you can't install custom ROMs with it. But if you need TWRP recovery, you will need to install TWRP recovery thru one of the tutorials here.
Click to expand...
Click to collapse
The current method of installing TWRP is not noob friendly. Nor is yours in fact after reading yours or seems not complicated than it needs to be. You also need to give credit to the creators of our TWRP and there guides.

galza said:
Can i use this method over patched boot image? I now rooted from https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-magisk-root-oos-5-1-5-t3794440 this guide…i wonder
Click to expand...
Click to collapse
Did it work for you?

Thanks @zedomax!! Never hurts to have different methods, opinions, or guides! Jeep rockin! #neversettle

@zedomax Thank you for these amazing tutorials. I watched both your videos. In that you mentioned that OnePlus ota updates are twrp compatible but then if I root will I have to unroot the phone or flash the stock rom first then install that ota update and then root again or there's some other method to install OTA on a rooted device?

Aashay said:
@zedomax Thank you for these amazing tutorials. I watched both your videos. In that you mentioned that OnePlus ota updates are twrp compatible but then if I root will I have to unroot the phone or flash the stock rom first then install that ota update and then root again or there's some other method to install OTA on a rooted device?
Click to expand...
Click to collapse
You can accept OTA, but you will have to reflash Magisk.img. Most OTAs do not overwrite boot.img I think unless they are major updates(like to Android P 9.0 when available). So, just flash OTA and if you lose root, reboot into TWRP and flash Magisk.

HI, thanks for the guide but my phone just blocked at recovery launch. Ho can i do?

Same
Edit: It's ok, probably a bug

Thank you zedomax for taking the time to create this guide. I'm gonna try it!
I assume this will work for both A6000 and A6003 right?

Hi Admin,
I lost my Wifi as soon as i rooted my device, please help?

Prabhjeet Bagga said:
Hi Admin,
I lost my Wifi as soon as i rooted my device, please help?
Click to expand...
Click to collapse
Me too. How can this be fixed?

I think I bricked my phone.
This is what I did:
- Bought OnePlus 6 (I think it was A6000)
- Installed OTA, so I was on Android 8.1.0 and OOS 5.1.8
- Followed this tutorial, which broke wifi
- I followed mixtapes02's advice on the video and reflashed OOS 5.1.8
- Now I cannot boot into Android anymore, I can only get to TWRP
EDIT: I managed to install OOS 5.1.5 successfully

aximili said:
I think I bricked my phone.
This is what I did:
- Bought OnePlus 6 (I think it was A6000)
- Installed OTA, so I was on Android 8.1.0 and OOS 5.1.8
- Followed this tutorial, which broke wifi
- I followed mixtapes02's advice on the video and reflashed OOS 5.1.8
- Now I cannot boot into Android anymore, I can only get to TWRP
EDIT: I managed to install OOS 5.1.5 successfully
Click to expand...
Click to collapse
I had the same issues and went through the same process. Took a whole day to get it back to stock.

I am sorry to ask such a noob question, but i am very confused by the command you say to use in Step 9:
>fastboot flash boot twrp twrp-3.2.1-oneplus6.img
what is the meaning of the first "twrp" in that command?
shouldn't it be simply:
fastboot flash boot twrp-3.2.1-oneplus6.img
Thank you in advance for the explanation

[SOLVED] Asking Experts for Solving Bootloop Nokia 8

So, I want to say that my Nokia 8 TA-1004 is having Bootloop. This happens very occasionally and randomly. It just attacks unexpected. I can't see what is the problem or what's the source of it. Thankfully, I have the logcat file. However, I do not understand what was the main cause. So please, I am asking the experts in here to help me identify the source of this error.
The Bootloop just boot like 4-5 times and then stopped Bootloop or sometimes just go straight to DOWNLOAD MODE and I had to restart manually. After that, i was able to gointo system like exploring like usual, and then it happens again. Sometimes not opening the app also happens. Repeat until you gets the nerve.
The phones status is rooted with magisk and unlocked bootloader but no twrp yet. Also, I am at 4.88B SP01 June,01 patch. If you are telling me that the root is the cause, then it is unlikely since it has been weeks since I had it rooted but the problem just came these recently.
Once again, I ask for the help of forumers here. I want to at least enjoy my phone that I love. I dont really want to sell the phone anymore.
Here's the link of logcat:
https://www16.zippyshare.com/v/2W0SVK8t/file.html
I promise. No viruses. Thank you

Hey, I suspect that this problem could be fixed by flashing original bootloader image.
I assume you have flashed an unsuitable image and I think you are using an unlocked bootloader, that's why you are facing this problem.

error748 said:
Hey, I suspect that this problem could be fixed by flashing original bootloader image.
I assume you have flashed an unsuitable image and I think you are using an unlocked bootloader, that's why you are facing this problem.
Click to expand...
Click to collapse
Do you mean flashing original Boot.img? As we know, to gain root, we need to flash patched boot.img with magisk. Do you mean this kind of issue? I notice the problem is in Android System. It says failed to load as data may corrupt. Google is also not responding and Google play services.
Unlocked Bootloader isnt the issue. But, I do think image is unsuitable. However, I have patched boot.img as the same as the version of Nokia. Is such thing still happen?

godofknife said:
Do you mean flashing original Boot.img? As we know, to gain root, we need to flash patched boot.img with magisk. Do you mean this kind of issue? I notice the problem is in Android System. It says failed to load as data may corrupt. Google is also not responding and Google play services.
Unlocked Bootloader isnt the issue. But, I do think image is unsuitable. However, I have patched boot.img as the same as the version of Nokia. Is such thing still happen?
Click to expand...
Click to collapse
now do one thing. flash stock boot img (will break wifi), after that download official twrp and boot into it. then from twrp flash twrp zip file provided with official boot img. reboot to twrp and flash latest magisk beta. (you will have wifi working after this)
This way you will get root and stable system.. no need to flash patched boot img anymore..
Make sure to revert back to stock boot first before flashing twrp..

sumitinhome said:
now do one thing. flash stock boot img (will break wifi), after that download official twrp and boot into it. then from twrp flash twrp zip file provided with official boot img. reboot to twrp and flash latest magisk beta. (you will have wifi working after this)
This way you will get root and stable system.. no need to flash patched boot img anymore..
Make sure to revert back to stock boot first before flashing twrp..
Click to expand...
Click to collapse
sumitinhome, I just did factory reset. The problem STILL HAPPENS. It means it wasn't any of the app but from the system or the boot.img itself perhaps.
With no way to enter the system, how do i get into the fastboot now? By pressing volume down + Power (That shows DOWNLOAD MODE)? Is that the fastboot? Then yet again, the only issue that I have is the exactly driver for Nokia 8. I found lots of drivers in the internet but I am quite confused which one is the real driver of Nokia 8 to be able to detect in fastboot and ADB. Do you have a driver installer?
Assuming if you will have given Nokia driver and I managed to get into fastboot mode by using hard key, do I type this command?
fastboot flash boot.img? Or is it wrong command?
Thank you and sorry if i ask too many questions.

godofknife said:
sumitinhome, I just did factory reset. The problem STILL HAPPENS. It means it wasn't any of the app but from the system or the boot.img itself perhaps.
With no way to enter the system, how do i get into the fastboot now? By pressing volume down + Power (That shows DOWNLOAD MODE)? Is that the fastboot? Then yet again, the only issue that I have is the exactly driver for Nokia 8. I found lots of drivers in the internet but I am quite confused which one is the real driver of Nokia 8 to be able to detect in fastboot and ADB. Do you have a driver installer?
Assuming if you will have given Nokia driver and I managed to get into fastboot mode by using hard key, do I type this command?
fastboot flash boot.img? Or is it wrong command?
Thank you and sorry if i ask too many questions.
Click to expand...
Click to collapse
1. download mode is fastboot mode.. no difference there.
2. unfortunately i dont have installer for drivers but you can find it if you browse nokia section in this forum.
3. you will need command 'fastboot flash boot_a boot.img' and 'fastboot flash boot_b boot.img' to flash stock boot img to your phone..
4. if you wish to install twrp then you will need to follow instructions from following thread
https://forum.xda-developers.com/nokia-8/development/official-twrp-nb1-t3832232
Make sure to read the thread and comments carefully before doing anything.
Hope it helped.

sumitinhome said:
1. download mode is fastboot mode.. no difference there.
2. unfortunately i dont have installer for drivers but you can find it if you browse nokia section in this forum.
3. you will need command 'fastboot flash boot_a boot.img' and 'fastboot flash boot_b boot.img' to flash stock boot img to your phone..
4. if you wish to install twrp then you will need to follow instructions from following thread
https://forum.xda-developers.com/nokia-8/development/official-twrp-nb1-t3832232
Make sure to read the thread and comments carefully before doing anything.
Hope it helped.
Click to expand...
Click to collapse
Hey there, thanks for the fast respond. It greatly helps.
Alright, I am waiting for the driver. Also, I checked anywhere in the forum section of Nokia 8 but none of them have 00WW_4.88bSP01 version of stock boot.img which is 1st June 2018 patch.
Do you happen to have had it? Is it okay if i ask for it? Thank you.

godofknife said:
Hey there, thanks for the fast respond. It greatly helps.
Alright, I am waiting for the driver. Also, I checked anywhere in the forum section of Nokia 8 but none of them have 00WW_4.88bSP01 version of stock boot.img which is 1st June 2018 patch.
Do you happen to have had it? Is it okay if i ask for it? Thank you.
Click to expand...
Click to collapse
I have it. Wait sometime.. i will upload it on gdrive and share you link

sumitinhome said:
I have it. Wait sometime.. i will upload it on gdrive and share you link
Click to expand...
Click to collapse
Yes sumitinhome, thank you so much. Try make it one upload with the driver. All that and I will do the fastboot command asap..
Oh yeah, one verify question. When the bootloader is unlocked, updating the newest ROM after august will lock the bootloader again or not? Some say yes, some say no. A member name hikari stated no, we are unaffected. But, some say relock again. Which is true?

godofknife said:
Yes sumitinhome, thank you so much. Try make it one upload with the driver. All that and I will do the fastboot command asap..
Oh yeah, one verify question. When the bootloader is unlocked, updating the newest ROM after august will lock the bootloader again or not? Some say yes, some say no. A member name hikari stated no, we are unaffected. But, some say relock again. Which is true?
Click to expand...
Click to collapse
we are unaffected.. and i have only boot img unfortunately.. i dont have drivers..
and dont update to august yet.. let pie come and update to pie directly then..
---------- Post added at 02:10 PM ---------- Previous post was at 02:04 PM ----------
godofknife said:
Hey there, thanks for the fast respond. It greatly helps.
Alright, I am waiting for the driver. Also, I checked anywhere in the forum section of Nokia 8 but none of them have 00WW_4.88bSP01 version of stock boot.img which is 1st June 2018 patch.
Do you happen to have had it? Is it okay if i ask for it? Thank you.
Click to expand...
Click to collapse
here is boot img
https://drive.google.com/file/d/1XtxIWQdn9dbtt1tJydM_6fFhslRZfozr/view?usp=drivesdk

sumitinhome said:
we are unaffected.. and i have only boot img unfortunately.. i dont have drivers..
and dont update to august yet.. let pie come and update to pie directly then..
---------- Post added at 02:10 PM ---------- Previous post was at 02:04 PM ----------
here is boot img
https://drive.google.com/file/d/1XtxIWQdn9dbtt1tJydM_6fFhslRZfozr/view?usp=drivesdk
Click to expand...
Click to collapse
Ah ha, thank you very much. I just need one more requirement. The driver. Honestly, there are so many drivers for Nokia 8 and none of them seems to work with my device detection. There's also type F, M driver..... Seriously confusing.

@sumitinhome, you are awesome. I must say thank you for helping me. Phone is no longer in bootloop state. However, I may require just little more help. I have also installed TWRP and succeeded. The problem is that the WIFI breaks. I went ahead and installed Magisk using zip one like you mentioned the steps in installing TWRP. It still doesn't solve the WIFI problem. How could this be? (Do note that I did not use fastboot flash twrp.img. I use fastboot boot twrp.img instead)
I also have other questions. During MTP in TWRP, I saw the partition drive; The internal storage and USB-OTG as given in picture below. What is the second drive meaning?
Second question is why is Magisk manager only showing Installed version v17.1? And the button is just uninstalled. I recall there are other buttons and feature like Safety Net and advance settings.
Finally, I want to know how do we get into recovery mode without using ADB command everytime? I tried pressing Volume UP + Power. But, it didn't go into TWRP. It just goes normal reboot.
Thank you so much once again.
Pic: https://ibb.co/jFtHPp

godofknife said:
@sumitinhome, you are awesome. I must say thank you for helping me. Phone is no longer in bootloop state. However, I may require just little more help. I have also installed TWRP and succeeded. The problem is that the WIFI breaks. I went ahead and installed Magisk using zip one like you mentioned the steps in installing TWRP. It still doesn't solve the WIFI problem. How could this be? (Do note that I did not use fastboot flash twrp.img. I use fastboot boot twrp.img instead)
I also have other questions. During MTP in TWRP, I saw the partition drive; The internal storage and USB-OTG as given in picture below. What is the second drive meaning?
Second question is why is Magisk manager only showing Installed version v17.1? And the button is just uninstalled. I recall there are other buttons and feature like Safety Net and advance settings.
Finally, I want to know how do we get into recovery mode without using ADB command everytime? I tried pressing Volume UP + Power. But, it didn't go into TWRP. It just goes normal reboot.
Thank you so much once again.
Pic: https://ibb.co/jFtHPp
Click to expand...
Click to collapse
Do one thing.
Flash stock boot img again. and after that do the following
1) Full charge your phone.
2) Get a MicroSD card ( 8 or 16 GB )
3) Download this - https://mega.nz/#!mRZHDaJI!3KrT2F0ZE...KQux5EvPWVGI_4
4) Copy it to SDCARD from your PC.
5) Put the SD card in ur mobile.
6) Go to recovery
7) Select update, from SDCARD - start flashing by pressing power button.
This will get back wifi. after that you can update to latest august patch too if you want and then flash twrp.
And about that OTG thing, don't worry twrp is being updated it will be fixed very soon. People are working on it.

sumitinhome said:
Do one thing.
Flash stock boot img again. and after that do the following
1) Full charge your phone.
2) Get a MicroSD card ( 8 or 16 GB )
3) Download this - https://mega.nz/#!mRZHDaJI!3KrT2F0ZE...KQux5EvPWVGI_4
4) Copy it to SDCARD from your PC.
5) Put the SD card in ur mobile.
6) Go to recovery
7) Select update, from SDCARD - start flashing by pressing power button.
This will get back wifi. after that you can update to latest august patch too if you want and then flash twrp.
And about that OTG thing, don't worry twrp is being updated it will be fixed very soon. People are working on it.
Click to expand...
Click to collapse
I see. Number 3 has Encryption. Also, before i can do this, i have a new problem. I was so stupid. I accidentally format everything including the system which leaves me NO OS. I should have just wipe data (factory reset). Not advanced wipe. Can I still install Stock rom (any version) with twrp? What do i do?

@sumitinhome, also I forgot to mention. SD Card and Internal storage is not detected in TWRP Mode. I checked in my PC. ADB Sideload is also fail. Is this the end of my phone fate?
EDITED: Never mind. I was using the obsolete TWRP Version. I updated to the latest one and SD Card and internal is detected in TWRP once again.

godofknife said:
@sumitinhome, also I forgot to mention. SD Card and Internal storage is not detected in TWRP Mode. I checked in my PC. ADB Sideload is also fail. Is this the end of my phone fate?
EDITED: Never mind. I was using the obsolete TWRP Version. I updated to the latest one and SD Card and internal is detected in TWRP once again.
Click to expand...
Click to collapse
well done

sumitinhome said:
well done
Click to expand...
Click to collapse
Thank you.
godofknife said:
I see. Number 3 has Encryption. Also, before i can do this, i have a new problem. I was so stupid. I accidentally format everything including the system which leaves me NO OS. I should have just wipe data (factory reset). Not advanced wipe. Can I still install Stock rom (any version) with twrp? What do i do?
Click to expand...
Click to collapse
@sumitinhome, how about this? I still have the issue. NO OS is running.

godofknife said:
Thank you.
@sumitinhome, how about this? I still have the issue. NO OS is running.
Click to expand...
Click to collapse
told you flash stock boot img again.. and use the above method i mention to flash firmware..
Do one thing.
Flash stock boot img again. and after that do the following
1) Full charge your phone.
2) Get a MicroSD card ( 8 or 16 GB )
3) Download this - https://mega.nz/#!mRZHDaJI!3KrT2F0ZE...KQux5EvPWVGI_4
4) Copy it to SDCARD from your PC.
5) Put the SD card in ur mobile.
6) Go to recovery
7) Select update, from SDCARD - start flashing by pressing power button

sumitinhome said:
told you flash stock boot img again.. and use the above method i mention to flash firmware..
Do one thing.
Flash stock boot img again. and after that do the following
1) Full charge your phone.
2) Get a MicroSD card ( 8 or 16 GB )
3) Download this - https://mega.nz/#!mRZHDaJI!3KrT2F0ZE...KQux5EvPWVGI_4
4) Copy it to SDCARD from your PC.
5) Put the SD card in ur mobile.
6) Go to recovery
7) Select update, from SDCARD - start flashing by pressing power button
Click to expand...
Click to collapse
That was also the solution for NO OS? Wow. Thanks. Um, the download link need Decryption key. Do you happen to have it?

godofknife said:
That was also the solution for NO OS? Wow. Thanks. Um, the download link need Decryption key. Do you happen to have it?
Click to expand...
Click to collapse
no it doesn't need any key

[TOOL][TWRP] EPR - Enchilada Partition Resizer [2.0.1][22.03.20]

Enchilada Partition Resizer for OnePlus 6!
What does this tool do? And what are the benefits? Well. This tool will resize Your system partition size to 6GB allowing You to flash any sGSI (some of them are huge) and my future roms that will require more than 3GB (2850mb roughly) system size. It's pretty problematic for many roms and I just delay them because of this.
DO NOT use it on 7 Pro, OP7 or anything else. (6T Tested and works)
I also added a backup feature of Your stock partition table just in case. Might be useful for some people.
Known Issues
You might get stuck in fastboot until You flash a ROM
How to Use:
MAKE SURE TO BACKUP EFS, DATA AND PERSIST (if possible) BEFORE USING IT!
Also make sure You're not currently using EPR! (If You already used 1.0 and Your system is still 6GB, no need for 2.0)
Boot into TWRP (Tested on BluSpark)
Flash EPR zip that matches Your storage
Reboot to bootloader (fastboot menu)
Run any force wipe flasher of a rom that You want to use.
Wait till it finishes flashing and done!
If You want to go back, simply flash EPR Remover and Format data + wipe system.
Download:
Enchilada Partition Resizer 2.0.1 TWRP Flashable
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join my group!
If You want to motivate me to work more, buy me a coffee!
https://www.paypal.me/protodevnano
Credits:
Alternative415 for testing 2.0 all day! :highfive:
Amir and Geci for testing and providing 256 and 64GB sizes!
Manan Gupta for Initial Windows version.
Adarsh for testing Windows version and having to use EDL 7 times
CosmicDan for original guide that helped me a lot!
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
​
XDA:DevDB Information
Enchilada Partition Resizer, Tool/Utility for the OnePlus 6
Contributors
ProtoDeVNan0
Version Information
Status: Stable
Created 2019-09-01
Last Updated 2019-09-01

Changelog:
02.09.19 - Added Windows Support
22.03.20 - Corrected guide in EPR 2.

Added windows batch compatibility. Haven't tested on an android device but seems to work.
https://drive.google.com/file/d/1IS8cfD59okX9qwaXUKxxVQedNzmpHhmt/view?usp=sharing

its not working for me on windows. but thanks anywya

Can't get into TWRP after resizing (Windows) ?? Always reboot to bootloader.
EDIT ; Maybe doing wrong.. Will edit again soon.

WrathChild08 said:
Can't get into TWRP after resizing (Windows) ?? Always reboot to bootloader.
EDIT ; Maybe doing wrong.. Will edit again soon.
Click to expand...
Click to collapse
same for me. now im tring to unbrick my phone.

WrathChild08 said:
Can't get into TWRP after resizing (Windows) ?? Always reboot to bootloader.
EDIT ; Maybe doing wrong.. Will edit again soon.
Click to expand...
Click to collapse
synk48 said:
same for me. now im tring to unbrick my phone.
Click to expand...
Click to collapse
When You're in a fastboot lock, You have to check what partition is active and then set it as active again.
So on windows if You resize A. And end up in fastboot lock.
You should use
fastboot --set-active=
(It will show You current slot)
and then
fastboot --set-active=a
If Your slot is a.
I have no idea why this happens but oh well. One day we will have 3 slots so let's appreciate 2 :silly:

Gonna try this to install OP7 Android 10 Rom Port, thanks. I Was on it all night long wondering why I couldn't make it working.
EDIT : Still stuck in fastboot mode even after typing fastboot --set-active=a (I resized a, yep), can't go to recovery. But maybe it's related to Android Q ? was on Q DP3 before resizing. Or Maybe it's because the OP7 ROm Port is hard to install aha. After cheking, system is 6Gb size so I guess your software is okay.

WrathChild08 said:
Gonna try this to install OP7 Android 10 Rom Port, thanks. I Was on it all night long wondering why I couldn't make it working.
EDIT : Still stuck in fastboot mode even after typing fastboot --set-active=a (I resized a, yep), can't go to recovery. But maybe it's related to Android Q ? was on Q DP3 before resizing. Or Maybe it's because the OP7 ROm Port is hard to install aha. After cheking, system is 6Gb size so I guess your software is okay.
Click to expand...
Click to collapse
follow this steps
if you are stuck in bootloader bootloop do this
1. msm download tool than back to OOS 5.1.11
2. unlock bootloader
3. manual update to OOS Q DP3
4. install patched boot to get magisk without root there you can find partched boot.img https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
4. this step is because android Q dont let you boot to TWRP by bootloader
5. install TWRP Zip with magisk
6. boot to recovery and open ERP Script to resize your partition and chose partition a
7. in bootloader put fastboot set_active b and then boot to recovery
8. select partition a
9. do a factory reset, wipe data
10. boot to bootloader
11. open OP7 Android 10 Port scrip
12. in bootloader put fastboot set_active a
13. done
if you phone still doesnt boot go to bootloader set_active b go to recovery, chose partition a in twrp and do a factory reset and wipe data again and reinstall OP7 port.
is the only way its worked for me. i hope it works for you.
sorry about my english.

The command window just vanishes after typing in the partition and hitting enter. Have tried entering both `a` and `b` and even tried running the batch file as an administrator. Anyone else facing this issue on Windows?

you forgot to type 'system'

sahu.prashant said:
The command window just vanishes after typing in the partition and hitting enter. Have tried entering both `a` and `b` and even tried running the batch file as an administrator. Anyone else facing this issue on Windows?
Click to expand...
Click to collapse
you wrote system first and next the partition letter?

synk48 said:
you wrote system first and next the partition letter?
Click to expand...
Click to collapse
LMAO I feel stupid. I just typed in the letter. :silly:

synk48 said:
follow this steps
if you are stuck in bootloader bootloop do this
1. msm download tool than back to OOS 5.1.11
2. unlock bootloader
3. manual update to OOS Q DP3
4. install patched boot to get magisk without root there you can find partched boot.img https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
4. this step is because android Q dont let you boot to TWRP by bootloader
5. install TWRP Zip with magisk
6. boot to recovery and open ERP Script to resize your partition and chose partition a
7. in bootloader put fastboot set_active b and then boot to recovery
8. select partition a
9. do a factory reset, wipe data
10. boot to bootloader
11. open OP7 Android 10 Port scrip
12. in bootloader put fastboot set_active a
13. done
if you phone still doesnt boot go to bootloader set_active b go to recovery, chose partition a in twrp and do a factory reset and wipe data again and reinstall OP7 port.
is the only way its worked for me. i hope it works for you.
sorry about my english.
Click to expand...
Click to collapse
after step 3 fastboot commands dont work, flashing twrp fails

Makhosi Mayisa said:
after step 3 fastboot commands dont work, flashing twrp fails
Click to expand...
Click to collapse
i sent you a PM...

synk48 said:
i sent you a PM...
Click to expand...
Click to collapse
Can you share?

Rishwan said:
Can you share?
Click to expand...
Click to collapse
what do you need?

synk48 said:
what do you need?
Click to expand...
Click to collapse
Same as above. I get the same error. Can't make EPR work, I end up in bootloader bootloop.

Rishwan said:
Same as above. I get the same error. Can't make EPR work, I end up in bootloader bootloop.
Click to expand...
Click to collapse
tell me what are you doing? step by step

synk48 said:
tell me what are you doing? step by step
Click to expand...
Click to collapse
tried a lot of ways.
1) MSM to go to 9.0.8
2) unlock bootloader and install twrp
3) boot twrp (with 9.0.8)
4) install dp 3 + twrp, reboot to recovery and repeat for both slots
5) on slot A, run EPR
6) at fastboot with no other way except to use msm because no command (such as set_active) makes it boot. at this point, i can't even go to recovery/bokt recovery (as Q doesn't support boot command)
method 2)
repeat the same except i ran EPR with 9.0.8 same issue. goes to bootloader always

Root + TWRP on Android 10 Post OTA?

I installed the Stable Android 10 on my GM1910 via TWRP, totally forgetting about maintaining root and TWRP.
So how do I bring back TWRP and root?
fastboot boot doesn't seem to work, I managed to pull the boot.img and patch it with Magisk from another device but flashing it through fastboot ends up in an endless bootanimation.
Could anyone help me? here's a link of the boot.img i pulled, it works if you flash it without magisk patching it.
Link: https://drive.google.com/file/d/1O8lF1UDwwu0zT8ro5Q1gKKfdxF-HGPEW/view?usp=sharing

(Almost) exactly the same here. I tired flashing a patched boot.img, it actually boots - but magisk manager gets stuck on the splash screen and some apps, including chrome, won't start. Trying to boot TWRP results in the phone getting stuck on the "fastboot mode" screen.
My only solution would be to downgrade, root, keep the upgrade this time. But because my ISP is doing some maintenance work I don't have wifi - and restoring my phone through mobile data does not seem to work correctly.
EDIT: In fastboot, neither bootloader version nor baseband version are show, product name is "msmnile". Has this always been that way?
EDIT 2, solution:
I extracted the boot.img from the device, and patched it using magisk on the same phone:
https://drive.google.com/file/d/1-Gf-6iXSFuYT5xDR-mnLKANvkXUHal9e/view?usp=sharing
Run this command in fastboot so you know which is the CURRENT active slot :
Code:
fastboot getvar current-slot
Run this command so you can flash the correct slot :
Code:
fastboot flash boot_X magisk_patched.img
replace X with the a or b from the command before.
:good:

dmj0shu4 said:
I installed the Stable Android 10 on my GM1910 via TWRP, totally forgetting about maintaining root and TWRP.
So how do I bring back TWRP and root?
fastboot boot doesn't seem to work, I managed to pull the boot.img and patch it with Magisk from another device but flashing it through fastboot ends up in an endless bootanimation.
Could anyone help me? here's a link of the boot.img i pulled, it works if you flash it without magisk patching it.
Link: https://drive.google.com/file/d/1O8lF1UDwwu0zT8ro5Q1gKKfdxF-HGPEW/view?usp=sharing
Click to expand...
Click to collapse
Hi sorry to hear that you got this problem and hopefully it gets fixed. I have another question: does that mean using TWRP to completely clean the device then installing Android 10 via zip will remove TWRP and fastboot everything? Does that mean after installing, everything will be refreshed like a box opened phone?

dmj0shu4 said:
I installed the Stable Android 10 on my GM1910 via TWRP, totally forgetting about maintaining root and TWRP.
So how do I bring back TWRP and root?
fastboot boot doesn't seem to work, I managed to pull the boot.img and patch it with Magisk from another device but flashing it through fastboot ends up in an endless bootanimation.
Could anyone help me? here's a link of the boot.img i pulled, it works if you flash it without magisk patching it.
Link: https://drive.google.com/file/d/1O8lF1UDwwu0zT8ro5Q1gKKfdxF-HGPEW/view?usp=sharing
Click to expand...
Click to collapse
If you have an endless boot animation you might be trying to boot from the wrong slot, try using the fastboot set_active command to change slot, then restart

h0l said:
Run this command in fastboot so you know which is the CURRENT active slot :
Run this command so you can flash the correct slot : replace X with the a or b from the command before.
:good:
Click to expand...
Click to collapse
I got a bit confused.
If the current slot is boot_a, i flash it in boot_b or am I supposed to flash on the one that isn't the current slot?

djsubterrain said:
If you have an endless boot animation you might be trying to boot from the wrong slot, try using the fastboot set_active command to change slot, then restart
Click to expand...
Click to collapse
Which is the default active slot? Is it okay to use either of the 2?

dmj0shu4 said:
Which is the default active slot? Is it okay to use either of the 2?
Click to expand...
Click to collapse
Either one should work if the rom and the rooted boot image is on it (If you are rooting). That's why you should install using TWRP, if you look in the reboot menu it will show you the active slot.

djsubterrain said:
Either one should work if the rom and the rooted boot image is on it (If you are rooting). That's why you should install using TWRP, if you look in the reboot menu it will show you the active slot.
Click to expand...
Click to collapse
I would've used TWRP but it won't let me boot into it
fastboot boot [recovery.img] does not seem to work for android 10, atleast on my case

dmjoshu4 said:
I got a bit confused.
If the current slot is boot_a, i flash it in boot_b or am I supposed to flash on the one that isn't the current slot?
Click to expand...
Click to collapse
You are supposed to flash it in the one that IS the active one. Because you do want to root the slot that you'll be booting.

does that mean using TWRP to completely clean the device then installing Android 10 via zip will remove TWRP and fastboot everything? I.e. everything will be refreshed like a box opened phone?

gh279760559 said:
does that mean using TWRP to completely clean the device then installing Android 10 via zip will remove TWRP and fastboot everything? I.e. everything will be refreshed like a box opened phone?
Click to expand...
Click to collapse
not everything, just twrp and root will be gone if you restarted without installing magisk to the inactive slot

h0l said:
(Almost) exactly the same here. I tired flashing a patched boot.img, it actually boots - but magisk manager gets stuck on the splash screen and some apps, including chrome, won't start. Trying to boot TWRP results in the phone getting stuck on the "fastboot mode" screen.
My only solution would be to downgrade, root, keep the upgrade this time. But because my ISP is doing some maintenance work I don't have wifi - and restoring my phone through mobile data does not seem to work correctly.
EDIT: In fastboot, neither bootloader version nor baseband version are show, product name is "msmnile". Has this always been that way?
EDIT 2, solution:
I extracted the boot.img from the device, and patched it using magisk on the same phone:
https://drive.google.com/file/d/1-Gf-6iXSFuYT5xDR-mnLKANvkXUHal9e/view?usp=sharing
Run this command in fastboot so you know which is the CURRENT active slot :
Code:
fastboot getvar current-slot
Run this command so you can flash the correct slot :
Code:
fastboot flash boot_X magisk_patched.img
replace X with the a or b from the command before.
:good:
Click to expand...
Click to collapse
dude, thanks for this, i was banging my head against a wall trying to get root to work. I used your patched boot img and i had the version mismatch, but i local updated my android and it has root!

dmj0shu4 said:
I would've used TWRP but it won't let me boot into it
fastboot boot [recovery.img] does not seem to work for android 10, atleast on my case
Click to expand...
Click to collapse
I have not been able to boot TWRP either in fastboot mode - got stuck at "OnePlus Logo FastBoot" black screen.

Hi guys.. can you post the steps in rooting android 10??
I've already had bootloader unlocked.
Do i need to.follow the steps intended for android 9??
Like
1. Install TWRP via fastboot.. (2files)
2. Reboot to twrp.
3. Flash magisk via twrp??
Is that it?? If so. Then after reading this thread.. some of. You mentioned about boot. Img?? Patched?? What's that supposed to mean?? Sir??
Thanks. Any advice is highly appreciated..
---------- Post added at 08:30 AM ---------- Previous post was at 08:28 AM ----------
And by the way..
Im on Gm1910 model. Global rom. Gm21AA build.. if that info would matter.. i dont actually need the root on android 9. Coz parallel app is working.. but now in android 10. It isnt working.. so.i need to root to grant su to game guardian.. thanks..

MigbyPie said:
I have not been able to boot TWRP either in fastboot mode - got stuck at "OnePlus Logo FastBoot" black screen.
Click to expand...
Click to collapse
Same.
I've read that Q/10 is different and you can't install TWRP like that anymore. Supposedly you need to use the MSM tool or the all-in-one tool but I've tried both of those and still can't boot to TWRP.

E30Nova said:
Same.
I've read that Q/10 is different and you can't install TWRP like that anymore. Supposedly you need to use the MSM tool or the all-in-one tool but I've tried both of those and still can't boot to TWRP.
Click to expand...
Click to collapse
Hopefully there will be a solution. I had tried to update from Pie to Q10 while staying rooted and it didn't work. So I had to wipe the whole device and decided to wait for a smoother root method for my device. If you have any other ideas about rooting Q10 let me know. Thank you

h0l said:
(Almost) exactly the same here. I tired flashing a patched boot.img, it actually boots - but magisk manager gets stuck on the splash screen and some apps, including chrome, won't start. Trying to boot TWRP results in the phone getting stuck on the "fastboot mode" screen.
My only solution would be to downgrade, root, keep the upgrade this time. But because my ISP is doing some maintenance work I don't have wifi - and restoring my phone through mobile data does not seem to work correctly.
EDIT: In fastboot, neither bootloader version nor baseband version are show, product name is "msmnile". Has this always been that way?
EDIT 2, solution:
I extracted the boot.img from the device, and patched it using magisk on the same phone:
https://drive.google.com/file/d/1-Gf-6iXSFuYT5xDR-mnLKANvkXUHal9e/view?usp=sharing
Run this command in fastboot so you know which is the CURRENT active slot :
Code:
fastboot getvar current-slot
Run this command so you can flash the correct slot :
Code:
fastboot flash boot_X magisk_patched.img
replace X with the a or b from the command before.
:good:
Click to expand...
Click to collapse
You saved my life! Thank you!
But how do we get twrp now? Is there any way?

Me too. Use tool all in one but it doesnt work. Stuck at "waiting twrp boots".
Any help, thanks.

Same here any Solution?
Sent from my GM1911 using Tapatalk
---------- Post added at 08:14 AM ---------- Previous post was at 08:14 AM ----------
Stuck at Fastboot booting when flashed img and also zip
Sent from my GM1911 using Tapatalk

I updated my phone to 10 last night, followed the same guide as I have for every other update but this time I lost root for some reason.
I still have TWRP recovery on there but it can't read internal storage so I can't flash Magisk.
I tried changing file system to ext 2 then back to 4 and then repairing it as I read elsewhere and this wiped the phone obviously but internal storage seemed to be working until I set the phone up again, downloaded Magisk, rebooted to recovery and I'm back where I started, internal storage showing as 0mb in TWRP.
Any ideas how to fix?

Can't Boot to twrp recovery (just displying twrp logo)

Hi guys,
just received from my sister a oneplus 6 and i tried to flash a new custom rom after updating the system. I was following the guide posted on these forum but, when i tried to boot from fastboot to twrp it just display endless the twrp logo. I tried to boot with an older twrp or blu spark but nothing, they all make QUALCOMM crashdump, just the latest never go past the twrp logo. Tried to search for someone with a similar problem but i couldnt find anything about my same problem. Thanks in advance.

Enossob said:
Hi guys,
just received from my sister a oneplus 6 and i tried to flash a new custom rom after updating the system. I was following the guide posted on these forum but, when i tried to boot from fastboot to twrp it just display endless the twrp logo. I tried to boot with an older twrp or blu spark but nothing, they all make QUALCOMM crashdump, just the latest never go past the twrp logo. Tried to search for someone with a similar problem but i couldnt find anything about my same problem. Thanks in advance.
Click to expand...
Click to collapse
Which android version are you? 9 10 11?

1. Unlock Bootloader (if is already unlocked, skip this step)
2. download platform tools and unpack
3. copy twrp img and installer zip to platform tools folder location
4. open cmd
5. reboot phone to bootloader
6. write in cmd fastboot erase userdata
7. then write fastboot boot twrp-file-image-name.img
8. twrp is booted, go to advanced and choos option Flash current twrp
9. if is done, then reboot to recovery
10. go to wipe option, choose format data and type yes
11. now you can flash rom using rom flashing instructions
12. remember, after done rom flashing, FLASH twrp installer

@Noob9496 hey dude thanks, i found Someone who had my same problem and I resolved too with fastboot erase userdata so I could had finally boot into twrp cause that was my main problem.
@croperas yeah that was the problem too, cause when I had finally my sweet rom, syberia os (the only android 12 available atm for op6) I tried to go back to the recovery but can't, tried reinstall everything but I couldn't so after some research couldn't find anything, but anyone who had problems with recovery almost always had problems with incompatible versions (like twrp for android 10 but had android 11) so I then realized it isn't still available a custom recovery for android 12 for op6. So after erasing everything its all fine. Thanks a lot guys really appreciated.

Enossob said:
@Noob9496 hey dude thanks, i found Someone who had my same problem and I resolved too with fastboot erase userdata so I could had finally boot into twrp cause that was my main problem.
@croperas yeah that was the problem too, cause when I had finally my sweet rom, syberia os (the only android 12 available atm for op6) I tried to go back to the recovery but can't, tried reinstall everything but I couldn't so after some research couldn't find anything, but anyone who had problems with recovery almost always had problems with incompatible versions (like twrp for android 10 but had android 11) so I then realized it isn't still available a custom recovery for android 12 for op6. So after erasing everything its all fine. Thanks a lot guys really appreciated.
Click to expand...
Click to collapse
Glad it worked out for you

Noob9496 said:
1. Unlock Bootloader (if is already unlocked, skip this step)
2. download platform tools and unpack
3. copy twrp img and installer zip to platform tools folder location
4. open cmd
5. reboot phone to bootloader
6. write in cmd fastboot erase userdata
7. then write fastboot boot twrp-file-image-name.img
8. twrp is booted, go to advanced and choos option Flash current twrp
9. if is done, then reboot to recovery
10. go to wipe option, choose format data and type yes
11. now you can flash rom using rom flashing instructions
12. remember, after done rom flashing, FLASH twrp installer
Click to expand...
Click to collapse
Enossob said:
@Noob9496 hey dude thanks, i found Someone who had my same problem and I resolved too with fastboot erase userdata so I could had finally boot into twrp cause that was my main problem.
@croperas yeah that was the problem too, cause when I had finally my sweet rom, syberia os (the only android 12 available atm for op6) I tried to go back to the recovery but can't, tried reinstall everything but I couldn't so after some research couldn't find anything, but anyone who had problems with recovery almost always had problems with incompatible versions (like twrp for android 10 but had android 11) so I then realized it isn't still available a custom recovery for android 12 for op6. So after erasing everything its all fine. Thanks a lot guys really appreciated.
Click to expand...
Click to collapse
I have the same problem after flashing OO 11.1.2.2. I made a mistake flashing the wrong patched image to get rooted again but doing this I lost the access to twrp and now there is no recovery anymore. If I try to boot into any older version of twrp I receive a crashdump, if I try to boot to twrp 3.6.0 it gets stuck to logo. If I use the command "fastboot erase userdata" do I lose something?

tenderloin83 said:
I have the same problem after flashing OO 11.1.2.2. I made a mistake flashing the wrong patched image to get rooted again but doing this I lost the access to twrp and now there is no recovery anymore. If I try to boot into any older version of twrp I receive a crashdump, if I try to boot to twrp 3.6.0 it gets stuck to logo. If I use the command "fastboot erase userdata" do I lose something?
Click to expand...
Click to collapse
Yeah, everything

Enossob said:
Yeah, everything
Click to expand...
Click to collapse
Is there another way to restore twrp?

I don't use twrp anymore. Attached is Magisk patched boot for OP6 11.1.2.2 I patched from the latest payload.
fastboot flash boot_a magisk_patched-23000_OP6_11.1.2.2.img
fastboot flash boot_b magisk_patched-23000_OP6_11.1.2.2.img

tenderloin83 said:
Is there another way to restore twrp?
Click to expand...
Click to collapse
Install the twrp installer directly from magisk

What I did was trying to install Lineage OS 18.1 (the latest nightly from Jan 11 2022) with Lineage OS Recovery. Following the official wiki I always got stuck in the lineage os boot animation. Never got past that. Tried to fastboot boot twrp.img but TWRP stuck on logo. I think I never tried to boot twrp with the userdata erased. I think I will try it.

Anyone trying to install the twrp, check out SHRP recovery for OP6/t. Boot the img and flash the zip from that thread. tested works with both OP6 and OP6t in OOS 11.1.2.2.