crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
Firmware (without vbmeta and dtbo): Click here.
Vendor: Click here.
Recovery: Click here.
Rom Link: Click here.
Gapps: Download Gapps
First time installing crDroid to your K20 Pro, or coming from another ROM:
** Make sure you're running a proper working Recovery (TWRP)
1) Install Recovery to your device
2) Copy fw zip, vendor zip to your device
3) Copy crDroid zip, Gapps zip to your device
4) Boot into Recovery
5) Wipe cache, system, & data (or just cache & system for a dirty flash).
6) Flash firmware & vendor
7) Flash Rom
8) Flash Gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
You tell me
Supported devices
Radmi K20 Pro (China, raphael)
Redmi K20 Pro Premium Edition (China, raphaels)
Mi 9T Pro (Global/EEA, raphael)
Radmi K20 Pro (India, raphaelin)
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE for crdroid Android
DONATE for me
Maintainer: 1582130940
Device tree: Click here.
Vendor tree: Click here.
Kernel: Prebuilt Kernel from Xiaomi MIUI China - raphael-user 9 PKQ1.190616.001 V10.4.1.0.PFKCNXM release-keys
ROM OS Version: 9.0.0 Pie
ROM Kernel: Linux 4.14.x
ROM Firmware Required: Unlocked Bootloader & TWRP & MIUI V10.4.1.0.PFKCNXM
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2019-12-20
Thx for your effort for our device
Installing
---------- Post added at 06:01 PM ---------- Previous post was at 05:24 PM ----------
Wifi not working
I see that, unlike the unofficial version of this ROM from the other thread, this one requires flashing Chinese firmware, which does not work for my device at all. Can I dirty flash this version over the one I have, without flashing that Chinese firmware which bricks my phone every time I try using it?
Sent from my Mi 9T Pro using Tapatalk
Huh this is kn the official crdroid site also, this should b moved to roms section no?
EpickBroVlad said:
Thx for your effort for our device
Installing
---------- Post added at 06:01 PM ---------- Previous post was at 05:24 PM ----------
Wifi not working
Click to expand...
Click to collapse
Sorry, in order for the device to work properly, you must flash the vendor and firmware of V10.4.1.0, otherwise there will be problems with WiFi or Sound not working properly.
kevinyohh said:
I see that, unlike the unofficial version of this ROM from the other thread, this one requires flashing Chinese firmware, which does not work for my device at all. Can I dirty flash this version over the one I have, without flashing that Chinese firmware which bricks my phone every time I try using it?
Sent from my Mi 9T Pro using Tapatalk
Click to expand...
Click to collapse
First of all, I don't think raphael (MI 9T Pro) can't flash raphaels firmware. Sorry, the current prebuilt vendor/kernel version, in order for the device's WiFi and sound to work properly, you must write the firmware and vendor of raphaels (Redmi K20 Pro Premium Edition), you can back up the data and try it.
ADFXHZ said:
First of all, I don't think raphael (MI 9T Pro) can't flash raphaels firmware. Sorry, the current prebuilt vendor/kernel version, in order for the device's WiFi and sound to work properly, you must write the firmware and vendor of raphaels (Redmi K20 Pro Premium Edition), you can back up the data and try it.
Click to expand...
Click to collapse
Why is that a need now, and not in the previous unofficial version?
Sent from my Mi 9T Pro using Tapatalk
kevinyohh said:
Why is that a need now, and not in the previous unofficial version?
Sent from my Mi 9T Pro using Tapatalk
Click to expand...
Click to collapse
The previous unofficial version also needs the corresponding firmware and vendor, but on raphael_global, this demand is not very obvious, but raphaels is a K20 Pro series phone released by Xiaomi, so the required firmware and vendor are old. Not applicable on the device
kevinyohh said:
Why is that a need now, and not in the previous unofficial version?
Sent from my Mi 9T Pro using Tapatalk
Click to expand...
Click to collapse
In order to be compatible with all the released series of raphael, I want to use raphaels' firmware and vendor is the best choice.
Mine is Raphael global (Mi 9T Pro), and the previous version of this ROM, apart from Xiaomi.eu Miui 10 and 11, were the only ROMs that worked for my device. All ROMs I've tried that require flashing Chinese stuff never booted on my device, leaving a black screen and removing Recovery access, forcing me to flash Fastboot stock.
Anyway, I don't see the need to try and soft brick my device again. And the previous version of this ROM is excellent. It's sad to see so many devs focusing only on one device and not advising about this soft brick. Anyway, good luck.
Sent from my Mi 9T Pro using Tapatalk
kevinyohh said:
Mine is Raphael global (Mi 9T Pro), and the previous version of this ROM, apart from Xiaomi.eu Miui 10 and 11, were the only ROMs that worked for my device. All ROMs I've tried that require flashing Chinese stuff never booted on my device, leaving a black screen and removing Recovery access, forcing me to flash Fastboot stock.
Anyway, I don't see the need to try and soft brick my device again. And the previous version of this ROM is excellent. It's sad to see so many devs focusing only on one device and not advising about this soft brick. Anyway, good luck.
Sent from my Mi 9T Pro using Tapatalk
Click to expand...
Click to collapse
Oh, sorry, this is an unexpected problem. I will complete the build vendor with Tingyichen as soon as possible so that I can ignore the limitations of the vendor and firmware.
ADFXHZ said:
Oh, sorry, this is an unexpected problem. I will complete the build vendor with Tingyichen as soon as possible so that I can ignore the limitations of the vendor and firmware.
Click to expand...
Click to collapse
What exactly IS the difference between your crDroid and the previous unofficial that's in the correct section?
Like @kevinyohh I am using the other one without issues and I won't flash a vendor on my EEA device that's not made FOR my device.
I don't understand why so many roms require a potentially disruptive vendor cross flash, while others like the previous crDroid work just fine without it
Nimueh said:
What exactly IS the difference between your crDroid and the previous unofficial that's in the correct section?
Like @kevinyohh I am using the other one without issues and I won't flash a vendor on my EEA device that's not made FOR my device.
I don't understand why so many roms require a potentially disruptive vendor cross flash, while others like the previous crDroid work just fine without it
Click to expand...
Click to collapse
Its 5.9 read change log
And its build with Raphael's vendor as base that's why its needs it
EpickBroVlad said:
Its 5.9 read change log
And its build with Raphael's vendor as base that's why its needs it
Click to expand...
Click to collapse
Our device IS raphael - same device, 5 different vendors ... yet some roms work just fine on the global/EEA versions.
The other crDroid was built by an indian dev, yet it didn't require any vendor cross flashing. Chances are that those of us on global/EEA vendors and the old version will not be able to update to this one
ADFXHZ said:
Oh, sorry, this is an unexpected problem. I will complete the build vendor with Tingyichen as soon as possible so that I can ignore the limitations of the vendor and firmware.
Click to expand...
Click to collapse
I didnt download this ROM, but if it has dtbo.img inside to flash, that is problem if phone goes to soft brick.
only mi logo, then shut down, no access to twrp.
solution could be if we save original dtbo.img from miui firmware, and then reflash with fastboot.
i had same problem with MSM-X ROM, as it has dtbo.img, and with stock miui it cant boot.
maybe it can boot with miui xeu if install before rom, didnt try
Why is it written unofficial in title when the same rom is present in https://crdroid.net/raphael website officially.
Nimueh said:
Our device IS raphael - same device, 5 different vendors ... yet some roms work just fine on the global/EEA versions.
The other crDroid was built by an indian dev, yet it didn't require any vendor cross flashing. Chances are that those of us on global/EEA vendors and the old version will not be able to update to this one
Click to expand...
Click to collapse
Older versions of vendor/firmware will not work properly on raphaels, so I have to use raphaels' vendor/firmware to make all raphael compatible (according to my tests, using raphaels firmware on China raphael is no problem) I am now skeptical May be raphaels' dtbo/vbmeta is not compatible with raphael_global/eea
slavke1976 said:
I didnt download this ROM, but if it has dtbo.img inside to flash, that is problem if phone goes to soft brick.
only mi logo, then shut down, no access to twrp.
solution could be if we save original dtbo.img from miui firmware, and then reflash with fastboot.
i had same problem with MSM-X ROM, as it has dtbo.img, and with stock miui it cant boot.
maybe it can boot with miui xeu if install before rom, didnt try
Click to expand...
Click to collapse
I don't have dtbo.img in my crdroid, but there is dbbo.img of raphaels in my firmware rom. I think the problem that raphael_global/eea can't be brushed into raphaels firmware is on dtbo.img.
ADFXHZ said:
Older versions of vendor/firmware will not work properly on raphaels, so I have to use raphaels' vendor/firmware to make all raphael compatible (according to my tests, using raphaels firmware on China raphael is no problem) I am now skeptical May be raphaels' dtbo/vbmeta is not compatible with raphael_global/eea
Click to expand...
Click to collapse
I don't know what causes the problems, I just know that cross-flashing vendors CAN cause issues.
Can you compare your build to the previous one(s) in the other thread to maybe narrow it down? Those builds definitely worked on global/EEA vendor, without the need to flash another one :good:
Nimueh said:
I don't know what causes the problems, I just know that cross-flashing vendors CAN cause issues.
Can you compare your build to the previous one(s) in the other thread to maybe narrow it down? Those builds definitely worked on global/EEA vendor, without the need to flash another one :good:
Click to expand...
Click to collapse
If I use the old vendor and firmware, then raphaels will not work properly, so I can only use rapalels firmware to adapt to all known raphael devices. I have now uploaded firmware that does not contain dtbo and vbmeta, you can try .
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
INSTALLATION INSTRUCTIONS
Download the latest build and the GApps (if you want them)
Reboot in recovery
Flash the latest build plus GApps
CHANGELOG
Click here for the changelog
DOWNLOADS
LOS_CARNERA_r1
LOS_CARNERA_r2
LOS_CARNERA_r3
LOS_DELAHOYA
LOS_ESPINOSA
GApps : https://wiki.lineageos.org/gapps.html
Kernel and GPL concerns
I'm actually not violating any GPL license due to the unreleased kernel source from Huawei.
The kernel used here, it's just the stock one without anykind of modification.
As the kernel sources will be released by our beloved Huawei Opensource department, it'll be added over here.
Support
I'm do offering support and some chitty-chat times over this Telegram group (over XDA support of course).
Feel free to join.
XDA:DevDB Information
Lineage OS, ROM for the Huawei P8lite/P8 Lite
Contributors
dil3mm4.dev, phhusson
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8 or other Android 8 ROM
Version Information
Status: Testing
Created 2018-05-08
Last Updated 2018-06-14
AWESOME!!!
As always THANKS BROTHER !!!!!!!
Is this rom working well and fully functional?
CHANGELOG
-Minor quirks fixing
-V4A should now work
DOWNLOADS
LOS_CARNERA_r2
CHANGELOG
Performance and stability fixes
DOWNLOAD
LOS_CARNERA_r3
NFC wanted to say hello to the HI6250 community!
Big updates incoming.
Stay tuned over Telegram at @GSI_HI6250 and over XDA!
dil3mm4.dev said:
NFC wanted to say hello to the HI6250 community!
Big updates incoming.
Click to expand...
Click to collapse
Sounds great.
Is it normal that my phone is stuck at the "your device has been unlocked" screen after I flashed this room and wiped the data partition on my phone(which had twrp+stock rom on emui 5)?
kilavuzcu said:
Sounds great.
Is it normal that my phone is stuck at the "your device has been unlocked" screen after I flashed this room and wiped the data partition on my phone(which had twrp+stock rom on emui 5)?
Click to expand...
Click to collapse
No that's definitely not normal lol, you need to be on emui 8 before flashing this rom.
RoccoA said:
No that's definitely not normal lol, you need to be on emui 8 before flashing this rom.
Click to expand...
Click to collapse
oh, well... This was a great learning experience I guess I should try the unbrick guide now.
CHANGELOG
- ALL THE RELEASE FROM DELAHOYA ON WILL BE FLASHABLE TWRP ZIPS NO MATTER WHAT, IT WILL BE FLASHABLE VIA TWRP
- NFC has been fixed
- No more need to push adb commands for the fingerprint navigation, it is inherited in settings disabling navbar on screen
(LOS BASED ROMs)
- Improved overall stability
- Built-in styles are now fixed (LOS BASED ROMs)
- GApps are now removed
Refer to the first thread post for downloads and instructions about GApps.
DOWNLOADS
LOS_DELAHOYA
What about the battery duration on this rom?
Can I install this rom having another treble rom already installed (DotOs) or do i have to come back to emui. Thanks
JesuuBL said:
Can I install this rom having another treble rom already installed (DotOs) or do i have to come back to emui. Thanks
Click to expand...
Click to collapse
Just format data and wipe cache,dalvick,data and then flash this rom, no need to reflash emui.
But before just remove your password and fingerprint of your actual rom.
---------- Post added at 01:16 PM ---------- Previous post was at 01:16 PM ----------
JesuuBL said:
Can I install this rom having another treble rom already installed (DotOs) or do i have to come back to emui. Thanks
Click to expand...
Click to collapse
Very good, no as good as stock actually but good anyway.
francos21 said:
Just format data and wipe cache,dalvick,data and then flash this rom, no need to reflash emui.
But before just remove your password and fingerprint of your actual rom.
---------- Post added at 01:16 PM ---------- Previous post was at 01:16 PM ----------
Very good, no as good as stock actually but good anyway.
Click to expand...
Click to collapse
Isn't it safer to Wipe Data / Cache via the Oreo No Check Recovery?, I heard that wiping or formatting Data via TWRP will have issues or something
As much as I wanted to try out these Treble ROMs, I'm still a bit unsure since there's a ROM where I need to flash the Stock recovery to wipe data and cache and this one doesn't require that
Also, is the signal still always low like in other Oreo ROMs?, or it's just an incorrect signal measuring?
joaoj1999 said:
Isn't it safer to Wipe Data / Cache via the Oreo No Check Recovery?, I heard that wiping or formatting Data via TWRP will have issues or something
As much as I wanted to try out these Treble ROMs, I'm still a bit unsure since there's a ROM where I need to flash the Stock recovery to wipe data and cache and this one doesn't require that
Also, is the signal still always low like in other Oreo ROMs?, or it's just an incorrect signal measuring?
Click to expand...
Click to collapse
For this rom just install zip that's it. Ye signal is average on every treble rom. Speedtest gave me similar results between emui 8 and treble roms, and I mostly use 4g so I don't mind just removed signal icon from status bar.
RoccoA said:
For this rom just install zip that's it. Ye signal is average on every treble rom. Speedtest gave me similar results between emui 8 and treble roms, and I mostly use 4g so I don't mind just removed signal icon from status bar.
Click to expand...
Click to collapse
So by just flashing the zip on TWRP, it wipes data / cache automatically?, Is that what you're trying to say?
joaoj1999 said:
So by just flashing the zip on TWRP, it wipes data / cache automatically?, Is that what you're trying to say?
Click to expand...
Click to collapse
Just let the zip perform its magic, as they say.
RoccoA said:
For this rom just install zip that's it. Ye signal is average on every treble rom. Speedtest gave me similar results between emui 8 and treble roms, and I mostly use 4g so I don't mind just removed signal icon from status bar.
Click to expand...
Click to collapse
The signal bug it's no more happening.
Since CARNERA releases.
joaoj1999 said:
So by just flashing the zip on TWRP, it wipes data / cache automatically?, Is that what you're trying to say?
Click to expand...
Click to collapse
Do not wipe anything, just flash the zip.
If it doesn't boot for you, consider to join the Telegram group to have further support.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Xiaomi Mi A2 / Mi 6X [jasmine][wayne]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device
Based on Android 9.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder (GCam)
Bluetooth
FMRadio
Fingerprint reader
IR
Lights
Sound / vibration
VolTE (If you reboot your device reset config SIM its needed for VolTE users | VOLTE not works in second SIM)
This rom works on Mi A2 if it was converted to Mi 6X (jasmine -> wayne). It doesn't have ARB so you can flash and revert to stock at any time! PS: I am not the maintainer of this ROM but you can report bugs.
Known issues
None so far
DON'T FLASH GAPPS, ALREADY INCLUDED
Click here to download
Translation
Help with project translation
Telegram channel
Stay tuned
Android OS version: 9.0.0_r1
Security patch level: August 2018
ROM OS Version: 9.x Pie
ROM Firmware Required: TWRP Recovery
Version Information
Status: Beta
Created 2018-08-26
Last Updated 2018-08-26
Is there a way to install this rom without converting to Mi 6X?
For me FP reader do not work and no FP reader in settings, front flash is always on, same bugs like other pie gsi roms.
Sent from my Phh-Treble vanilla using Tapatalk
Thanks for sharing this ROM I really wanna try it, but I can't even download from mega, use gdrive please
deleted
Stidza said:
Is there a way to install this rom without converting to Mi 6X?
Click to expand...
Click to collapse
Why not? There must be a way around. Since Mi A2 is A/B partition, search for Pixel Experience GSI ARM64-A/B or something like that.
Nice rom, will try it if already stable.
Did anyone tried this ROM except me ? I can not figure out how the hell I have same buggs on every single GSI PIE ROM including this? In the OP it says no bugs... What am I doing wrong
Mr.Nice.ba said:
Did anyone tried this ROM except me ? I can not figure out how the hell I have same buggs on every single GSI PIE ROM including this? In the OP it says no bugs... What am I doing wrong
Click to expand...
Click to collapse
I do not have the bugs mentioned by you. We wait for others to confirm.
What version of recovery You are using?
I have wiped system, dalvik, cache, data, and formatted data (internal storage). Clean install this zip after that. Same bugs also when I have flashed latest PE system img with twrp over this ROM.
I am using 6/128 A2 version. I think it is very smooth and fast rom, but these bugs are really annoying, especially when front flash turn on when you are using face unlock.
Sent from my MI 6X using Tapatalk
mi 6x
Can I flash this from mi 6x version?
Mr.Nice.ba said:
What version of recovery You are using?
I have wiped system, dalvik, cache, data, and formatted data (internal storage). Clean install this zip after that. Same bugs also when I have flashed latest PE system img with twrp over this ROM.
I am using 6/128 A2 version. I think it is very smooth and fast rom, but these bugs are really annoying, especially when front flash turn on when you are using face unlock.
Click to expand...
Click to collapse
Newbie here
I guess the bug you're talking about turning on the flash when face unlock is not a bug. Actually it only occurs when you are in a low light situations.
---------- Post added at 02:04 PM ---------- Previous post was at 02:01 PM ----------
Mr.Nice.ba said:
What version of recovery You are using?
I have wiped system, dalvik, cache, data, and formatted data (internal storage). Clean install this zip after that. Same bugs also when I have flashed latest PE system img with twrp over this ROM.
I am using 6/128 A2 version. I think it is very smooth and fast rom, but these bugs are really annoying, especially when front flash turn on when you are using face unlock.
Click to expand...
Click to collapse
Is fingerprint already working?
If it is I will try it on my device too
To be cleared, bugs:
-Flash on front facing camera is ALWAYS ON no meter what light condition is.
-For face unlock, front camera is used to recognize you, so for a second flash comes ON when camera is checking for your face (connected with first bug I wrote)
-Fingerprint is not working at all, and there is no FP reader settings in settings app
-No 4K recording option at all in stock app, gcam port app, open camera app
-Notification light is always on or do not work at all
Those bugs are present in every GSI ROM I have tried (LOS 16, LOS 16 with gapps, Benzo ROM, AOSP 9 latest 3 builds) and in this ROM also. Those bugs were present with A2 stock firmware and A/B GSI images, and also after conversion to 6X using A only images. This is device specific problem A2/6X. Saw some videos on youtube where FP reader works etc, asked about that in comments and didn't get answers. Maybe they used some fixes, mods, or another vendor, boot img, firmware, I don't know...
Mr.Nice.ba said:
To be cleared, bugs:
-Flash on front facing camera is ALWAYS ON no meter what light condition is.
-For face unlock, front camera is used to recognize you, so for a second flash comes ON when camera is checking for your face (connected with first bug I wrote)
-Fingerprint is not working at all, and there is no FP reader settings in settings app
-No 4K recording option at all in stock app, gcam port app, open camera app
-Notification light is always on or do not work at all
Those bugs are present in every GSI ROM I have tried (LOS 16, LOS 16 with gapps, Benzo ROM, AOSP 9 latest 3 builds) and in this ROM also. Those bugs were present with A2 stock firmware and A/B GSI images, and also after conversion to 6X using A only images. This is device specific problem A2/6X. Saw some videos on youtube where FP reader works etc, asked about that in comments and didn't get answers. Maybe they used some fixes, mods, or another vendor, boot img, firmware, I don't know...
Click to expand...
Click to collapse
Well maybe well wait for the fixes this is first "official" build tho
I am gonna stick for magisk with stock for now
Currently I am on AOSP Extended, works fantastic, but I am always trying new builds and ROM.
Hello how to insall on my mi A2 (convert mi6 x ) ?
It's the same rom that project treble?
FM radio can't be working, because our device doesn't have the necessary hardware for it.
I think I'll hold off on flashing this...
soulicro said:
FM radio can't be working, because our device doesn't have the necessary hardware for it.
I think I'll hold off on flashing this...
Click to expand...
Click to collapse
There seems to be an radio functionality inside the SD660 and someone mentioned the 6x got it enabled in the pie beta
Benjamin_L said:
There seems to be an radio functionality inside the SD660 and someone mentioned the 6x got it enabled in the pie beta
Click to expand...
Click to collapse
Am I missing something? Can't see support for it neither here nor here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are very excited to announce the release of Paranoid Android Quartz, based on Android 10.
On the first launch, you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app, included in our builds.
Our builds are based on the Code Aurora Forum Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Device-specific issues
You tell me
Requirements
FW 11.0.2.0 + BB 11.0.3.4
https://mega.nz/file/W8gBRTJK#ZoDoH26FhT3B67KKpuJBZs4uRrrQheOEWp05SLAqtis
Download
Gapps
MOD EDIT: Link Removed
Vanilla
MOD EDIT: Link Removed
Changelogs
Features:
-Fully CAF based
-Fully compatibility with Audio Mod by @iamphoenix01
-ParanoidDoze (AOD, lift to wake, dt2w...)
-Edge lighting
-Face Unlock
-Volume Panel completely redesigned
-Data tile
-Multi-User support
-Microg support
-/data and /cache f2fs support
Instructions
We highly recommend to use Zerne SHRP Recovery from 1st March.
1. Flash FW + BB (Optional)
2. Flash Paranoid Android Grus
3. Flash Magisk (via add more zips) (Optional)
** Only required for the first flashing, and maybe optional.
Important / Useful links
Paranoid Android Twitter
MOD EDIT: Link Removed
MOD EDIT: Link Removed
Kernel Source
Cheers and #StayParanoid!
XDA:DevDB Information
ParanoidAndroid Grus, ROM for the Xiaomi Mi 9 SE
Contributors
gran_lexu, Pengus77, Zerne
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: Quartz 4
Stable Release Date: 2020-07-21
Created 2020-07-21
Last Updated 2020-07-21
Excellent news. Is this an official release? Which gapps uses? Since I prefer pico.
Any bugs?
Thanks again dude, this is great news for our Grus.
ramping said:
Excellent news. Is this an official release? Which gapps uses? Since I prefer pico.
Any bugs?
Thanks again dude, this is great news for our Grus.
Click to expand...
Click to collapse
Hey, not unofficial but doesn't matter since I will keep it up to date so do not worry
It tracks Pixel Experience repo gapps however with Quartz 3 update I will release a vanilla version
No bugs so far
Does this rom support ethernet connection? Official MIUI and Xiaomi.eu version doesn't support ethernet connection for this device
aresbv2000 said:
Does this rom support ethernet connection? Official MIUI and Xiaomi.eu version doesn't support ethernet connection for this device
Click to expand...
Click to collapse
It should as stock Android 10 does, however I didnt test it as I dont have an ethernet OTG.
But as said, it should support it.
please make a gapps-fre version or gapps pico
Paranoid and vanilla gapps contradict each other
R!ffRaff said:
please make a gapps-fre version or gapps pico
Paranoid and vanilla gapps contradict each other
Click to expand...
Click to collapse
It includes stock gapps PA team includes in github.
Vanilla version is coming next week.
gran_lexu said:
It includes stock gapps PA team includes in github.
Vanilla version is coming next week.
Click to expand...
Click to collapse
please make a gapps-free version.
Downloadlink down?
R!ffRaff said:
please make a gapps-free version.
Downloadlink down?
Click to expand...
Click to collapse
Yes, coming next week.
Fixed, up now
Hi, this is my first time flashing custom rom on my Mi 9 SE, though i had experience from my previous devices.
Just asking to be sure, i would need to have TWRP flashed first right? And is there any other necessary tools that i need to flash, like firmware or anything?
And what do you mean by having firmware 11.0.2.0?
EDIT: I understand on the firmware question, i will have to flash 11.0.2.0 firmware, got it. But what is the flashing order?
Hi all,
Thanks for the work!
Somehow due to my inexperience I managed to softbrick my device (stuck at fastboot, fixable by reflashing miui image). So I have a couple of questions:
1. I am going from firmware 11.0.2.0 Europe (QFBEUXM). Does this require to start from another version of the firmware (Global for example)
2. The kernel needs to be flashed separately? Or is it included in the flash package.
Thanks.
Lokcies said:
Hi, this is my first time flashing custom rom on my Mi 9 SE, though i had experience from my previous devices.
Just asking to be sure, i would need to have TWRP flashed first right? And is there any other necessary tools that i need to flash, like firmware or anything?
And what do you mean by having firmware 11.0.2.0?
EDIT: I understand on the firmware question, i will have to flash 11.0.2.0 firmware, got it. But what is the flashing order?
Click to expand...
Click to collapse
Yes, you need to have custom TWRP (SHRP reocommended) wipe dalvik/cache/data/vendor/system, flash 11.0.2 and then flash rom and magisk
sacortesh said:
Hi all,
Thanks for the work!
Somehow due to my inexperience I managed to softbrick my device (stuck at fastboot, fixable by reflashing miui image). So I have a couple of questions:
1. I am going from firmware 11.0.2.0 Europe (QFBEUXM). Does this require to start from another version of the firmware (Global for example)
2. The kernel needs to be flashed separately? Or is it included in the flash package.
Thanks.
Click to expand...
Click to collapse
No it doesnt matter. Just flash twrp.img from adb and then required wipes, flash 11.0.2 + rom + magisk
kernel is already included.
Do you have a link for the required firmware?
Peace
gran_lexu said:
Yes, you need to have custom TWRP (SHRP reocommended) wipe dalvik/cache/data/vendor/system, flash 11.0.2 and then flash rom and magisk
No it doesnt matter. Just flash twrp.img from adb and then required wipes, flash 11.0.2 + rom + magisk
kernel is already included.
Click to expand...
Click to collapse
Tried once more and didn't work (still stuck at fastboot). However, reading somewhere else I found out that when you come from a MIUI Rom (like stock) to AOSP you might need to flash also vbmeta. Tried that and it worked correctly.
So far no problems, great performance.
chris5s said:
Do you have a link for the required firmware?
Peace
Click to expand...
Click to collapse
https://t.me/wtfirmware
sacortesh said:
Tried once more and didn't work (still stuck at fastboot). However, reading somewhere else I found out that when you come from a MIUI Rom (like stock) to AOSP you might need to flash also vbmeta. Tried that and it worked correctly.
So far no problems, great performance.
Click to expand...
Click to collapse
Ahhh! Though you did all the previous steps, yeah you have to make a few things coming from MIUI obviously!
gran_lexu said:
https://t.me/wtfirmware
Click to expand...
Click to collapse
Thanks but I don't have telegram.
Peace.
chris5s said:
Thanks but I don't have telegram.
Peace.
Click to expand...
Click to collapse
There you go:
https://mega.nz/file/qIEiFKAQ#OEuqF8yGGhKGNSB9i9cnphbUgoF3Yh6QZOTJaCHcwkk
sacortesh said:
Tried once more and didn't work (still stuck at fastboot). However, reading somewhere else I found out that when you come from a MIUI Rom (like stock) to AOSP you might need to flash also vbmeta. Tried that and it worked correctly.
So far no problems, great performance.
Click to expand...
Click to collapse
Could you write down the order of flashing that you used.
Thanks.
Nice ROM, smooth. The only minor "fault" I find is that fingerprint recognition for unlocking the phone isn't great. I usually have to put in the PIN code to unlock. I had this issue on Pixel Experience too. But otherwise all's good.
Peace
---------- Post added at 11:46 AM ---------- Previous post was at 11:45 AM ----------
zbiba said:
Could you write down the order of flashing that you used.
Thanks.
Click to expand...
Click to collapse
This worked for me - factory reset, format data, reboot recovery, flash firmware then flash ROM (as per first post!)
Peace
zbiba said:
Could you write down the order of flashing that you used.
Thanks.
Click to expand...
Click to collapse
My flashing order when coming from stock MIUI 11.
1. Of course first unlock bootloader.
2. Flash TWRP from @redispade
3. Format Data from TWRP
4. Reboot to TWRP
5. Wipe dalvik/cache/data/vendor/system
6. Copy the ROM and firmware zip files to internal storage.
7. Flash the firmware zip
8. Flash the ROM zip
9. Reboot (it won't reboot to ROM, it will be stuck at flashboot)
10. Connect to the PC and from cmd flash vbmeta (fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img)
11. From cmd type the command "fastboot reboot" and finger's crossed, now you should see the boot screen.
As far as I remember this is what I did. I tried to recall it as much as I could however it was 4 in the morning.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
Instructions :
Download Twrp, GApps (if you need them), and Magisk (Version 21.4 or older).
Flash the downloaded TWRP via fastboot
Boot to recovery
Flash the latest build and Magisk.
Flash GApps and any other necessary add-ons
Known issues:
Carrier Video Calling (ViLTE)
Do bug reports in the comment section
Downloads :
Redmi 6(cereus) Download
Magisk: Download
Recovery redmi 6: TWRP OrangeFox
Google Apps: OpenGApps (use arm/10.0 nano gapps)
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Thanks to:
@wulan17 for device tree
LineageOS team
Source code:
Common device tree: https://github.com/xiaomi-mt6765/android_device_xiaomi_mt6765-common
Device tree redmi 6: https://github.com/wulan17/android_device_xiaomi_cereus
Kernel: https://github.com/xiaomi-mt6765/android_kernel_xiaomi_mt6765
XDA DevDB Information
LineageOS 17.1 for Xiaomi Redmi 6 and 6a
Contributors
@EinTim23
Source Code: https://github.com/LineageOS
ROM OS Version: 10.x Q
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI 10.4.4 - 11.0.4.0 (11.0.5.0 is not working) vendor and firmware
Based On: CyanogenMod/AOSP
Version Information
Status: Stable
Release Date: 2021-03-24
Created 2021-03-24
Last Updated 2021-03-24
--
Hi, Im happy that someone has finally done an Android 10 ROM for Redmi 6, but I have a question.
Ive tried to install a custom ROM on my Redmi 6, but it hard bricked...
Have you tried to flash this on a real device (just making sure before I actually install it)?
Sucharek 233 said:
Hi, Im happy that someone has finally done an Android 10 ROM for Redmi 6, but I have a question.
Ive tried to install a custom ROM on my Redmi 6, but it hard bricked...
Have you tried to flash this on a real device (just making sure before I actually install it)?
Click to expand...
Click to collapse
Yes many people tried it on telegram. Maybe your miui version was unsupportet?
EinTim23 said:
Yes many people tried it on telegram. Maybe your miui version was unsupportet?
Click to expand...
Click to collapse
Hi, I think you misunderstood me. I've tried other ROM that bricked my device, not this.
EDIT: My phone is working fine.
Anyway, thanks for the reply
Thanks for the rom . A great job! I just installed it on my redmi 6 (cereus_Brazil) and for now it's working well. I will continue testing.
Thanks for the ROM.
It's working very well.
There are tiny little issues but none affects general usability since the ROM is rock solid.
1. The first minor issue is the fingerprint(it is working very well) is working like a.. mouse click and if I tap the fingerprint while phone is unlocked, it will select things, start apps, etc.
2. The maximum volume level is lower than stock ROM.
Successfully flashed the ROM but keeps getting pop-ups "android.process.acore keeps stopping".
How to fix?
Hey, I tried flashing this without clearing userdata, but it failed when decrypting them. So I wiped userdata, and the OS booted fine, but I cannot actually write to userdata, so downloading files does not work, taking photos, etc.
How can I fix this? I don’t mind wiping the whole phone again; how should I wipe it to prevent this issue? Cheers.
EDIT: I tried a full wipe, MTP worked fine in TWRP, but after a flash userdata stopped working again.
Hi, i recenyly own this device. And MUI is just not for my taste.
Are you still maintaining this rom?
If yes, then i would very happy to install it. You know, there is not that much custom roms for this one.
Anyway, thank you for your work
Hey there, well i have tried many of the custom roms (unofficial) for my redmi 6 cereus, like carbon rom, pixel experience, pixel experience plus, but none of them worked properly, i was somehow facing issues, like camera isn't working etc and i had to return to the stock miui, well i am tired installing diff roms again and again, will yours work properly, what are the issues i can actually face in this your provided lineage os rom? Have you tried and tested it perfectly? I dont wanna brick my device though....
Spar**** Thakur said:
Hey there, well i have tried many of the custom roms (unofficial) for my redmi 6 cereus, like carbon rom, pixel experience, pixel experience plus, but none of them worked properly, i was somehow facing issues, like camera isn't working etc and i had to return to the stock miui, well i am tired installing diff roms again and again, will yours work properly, what are the issues i can actually face in this your provided lineage os rom? Have you tried and tested it perfectly? I dont wanna brick my device though....
Click to expand...
Click to collapse
I tested it on redmi 6 cereus and everything worked fine. just make sure to use 11.0.8.0 miui as base on cactus and 11.0.4.0 for cereus
EinTim23 said:
I tested it on redmi 6 cereus and everything worked fine. just make sure to use 11.0.8.0 miui as base on cactus and 11.0.4.0 for cereus
Click to expand...
Click to collapse
Hey hi, I'm not very knowledgeable about how to use forums but I try anyway. Since my redmi 6 has a 64-bit architecture, but runs a 32-bit system (I saw it using aida64), does this rom allow it to run in 64-bit or not?
Kuroeks said:
Hey hi, I'm not very knowledgeable about how to use forums but I try anyway. Since my redmi 6 has a 64-bit architecture, but runs a 32-bit system (I saw it using aida64), does this rom allow it to run in 64-bit or not?
Click to expand...
Click to collapse
no rom allows the phone to run in 64 bit mode, because the released kernel source is 32 bit
How to install it if I updated phone do 11.0.5 ?
resowy32 said:
How to install it if I updated phone do 11.0.5 ?
Click to expand...
Click to collapse
downgrade via miflash to 11.0.4.0
I done it. I will give a feedback after few days how this ROM works.
EinTim23 said:
I tested it on redmi 6 cereus and everything worked fine. just make sure to use 11.0.8.0 miui as base on cactus and 11.0.4.0 for cereus
Click to expand...
Click to collapse
What about volte? Most custom roms have this issue, and it is compulsory for me, is it working fine?
resowy32 said:
I done it. I will give a feedback after few days how this ROM works.
Click to expand...
Click to collapse
Hey, how is your rom working, any issues or anything else? What about your experience with it?
Spar**** Thakur said:
Hey, how is your rom working, any issues or anything else? What about your experience w
Click to expand...
Click to collapse
Everything is all right. Battery life is a way better (about 50% longer for me).
I can not tell you about VoLTE because I do not use it.
I just do not have a led notification while charging but it is not a problem.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nusantara Project 4.5 (sinila) for Redmi 9A/9C/9 Activ
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
"Bhinneka Tunggal Ika"
What's working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Sound/vibration
Known issues
Fingerprint
VoLTE
1. Take IMEI Backup (don't complain if you don't take backup and lose IMEI, also store backup on PC or somewhere safe)
2. Wipe data, cache, and dalvik cache
3. Flash ROM
4. Reboot
5. Flash Magisk (after booting, using ADB sideload on PC)
6. Flash GApps (optional)
Pre-instructions:
1. Must be on MIUI 12.0.10 Global firmware
2. Use TWRP LR TEAM or PBRP recovery
ROM: garden
GApps Package: NikGApps
Recovery: OrangeFox Recovery
Code:
1. Nusantara ROM is based on?
Ans. Its based on AOSP
2. Do we need to flash Gapps?
Ans. Yes if Nusantara ROM Vanilla does not come with prebuilt gapps.
3. When will be the next update! Any ETAs?
Ans. There will be regular updates as and when the team is ready to push a new update. Kindly do not ask for ETAs.
4. I need this feature/ I found some bugs!
Ans. Firstly if u find any bug then please check with your add-ons like magisk module, zips, etc u flashed and whether its related or no. Though if your sure that its from rom side then kindly grab a [URL="https://telegra.ph/Logcats-are-important-03-01"]Logcat[/URL] and report to me just mention on reply.
Dirty Unicorns especially @alexcruz
AOSP
LineageOS
MSM Xtended
Havoc OS
Evolution X
AOSiP
And all the other devs/ROMs
You can find our all sources down here:
Source
Devices Source
Kernel Source
More:
Our Telegram Channel
Join Device Support group
XDA:DevDB Information
Nusantara Project ROM for the Xiaomi Redmi 9A/9C/9 Activ (garden)
Maintainer: Mikazuuu07
Build Type: OFFICIAL
Contributors
Mikazuuu07
Source Code: https://github.com/Nusantara-ROM
ROM OS Version: Android 12.1
ROM Firmware Required: Must be on MIUI 12.0.10 Global
Based On: DirtyUnicorns
Version Information
Status: Stable
Created: 2021-12-14
Last Updated: 2022-05-23
Screenshots
**
LiaFourté said:
Flash this after flashing the ROM (refer on step 4 from the instructions)
Click to expand...
Click to collapse
Just realized that it's not required since the ROM itself is already in Permissive. Ignore this
So, I was wrong. I assumed that this Android 12 build will have performance issues as it is very common with our past a12 roms. Thankfully I was proven wrong. I can't believe it's smooth. This is worth a try guys!
UPDATED LIST OF BUGS
could you pass me the magisk for redmi 9c? I've been looking and haven't found anything.
Thanks in advance
XtremeTHN22 said:
could you pass me the magisk for redmi 9c? I've been looking and haven't found anything.
Thanks in advance
Click to expand...
Click to collapse
you can get one from the magisk github repository itself, the apk file is flashable as a zip file
Also, after flashing the ROM, your data in internal storage comes encrypted. This happens often when you flash a12 ROMs, so it's either you use your PC to sideload flashing Magisk via ADB or using your microSD.
please what magisk module fix the hostpot?
MaykoDiaz7 said:
please what magisk module fix the hostpot?
Click to expand...
Click to collapse
LiaFourté said:
Flash this after flashing the ROM (refer on step 4 from the instructions)
Click to expand...
Click to collapse
Please don't flash it, after the system was turned on, the recovery only turned on and off at the recovery return, I could not enter fastboot, I could not return to stock rom
I've flashed a lot of custom ROMs, but never had so much trouble as with Angelica grrr.! Nusantara is the ROM I want as I use this on my daily driver Redmi 9t and love it...
I've flashed this ROM after failing to get wifi/BT working on the A11 builds, I'm using 12.0.10 base... This A12 ROM bootloops (repeated islands cycle) for over an hour I've left it... Now I can't get PRPB recovery to load, I had it installed on device from previous ROM (Havoc), that is now in effect bootlooping... I've tried fastboot flash recovery and fastboot boot pbrp.img and it bootloops... any ideas how I can get back into recovery mode??? I can't find another recovery for Angelica
Edit: Flashed MIUI from fastboot... Will try CrDroid instead
velo27 said:
I've flashed a lot of custom ROMs, but never had so much trouble as with Angelica grrr.! Nusantara is the ROM I want as I use this on my daily driver Redmi 9t and love it...
I've flashed this ROM after failing to get wifi/BT working on the A11 builds, I'm using 12.0.10 base... This A12 ROM bootloops (repeated islands cycle) for over an hour I've left it... Now I can't get PRPB recovery to load, I had it installed on device from previous ROM (Havoc), that is now in effect bootlooping... I've tried fastboot flash recovery and fastboot boot pbrp.img and it bootloops... any ideas how I can get back into recovery mode??? I can't find another recovery for Angelica
Edit: Flashed MIUI from fastboot... Will try CrDroid instead
Click to expand...
Click to collapse
That's weird, I have tried several ROMs on my 9C and have not encountered such issue.
is there a way to use a custom font on this rom ? if yes, how ! Thanks a lot
Arnaechan said:
is there a way to use a custom font on this rom ? if yes, how ! Thanks a lot
Click to expand...
Click to collapse
you may look for magisk module fonts
thanks, i figured it out . Ah and one more question , how do you make these Redmi 9A (garden) compatible roms ? Cuz i wanna try and do the same for the new Nusantara version .
Thanks a lot in advance
Arnaechan said:
thanks, i figured it out . Ah and one more question , how do you make these Redmi 9A (garden) compatible roms ? Cuz i wanna try and do the same for the new Nusantara version .
Thanks a lot in advance
Click to expand...
Click to collapse
Actually, I don't build ROMs, I'm just a publisher as the original devs don't want to post their ROMs to the public being exclusive only in the Indonesian community. But by building ROMs, you use device sources which are indicated in the sources section of the post above.
LiaFourté said:
Actually, I don't build ROMs, I'm just a publisher as the original devs don't want to post their ROMs to the public being exclusive only in the Indonesian community. But by building ROMs, you use device sources which are indicated in the sources section of the post above.
Click to expand...
Click to collapse
OOh so you didn't make the rom , you just publish them , got it !
thanks my dear
i need gapps for 12.1 i have error when installing litegapps this android version is not support