How to update OB7 from OSS 9.0.2 ???
Not rooted , bootloader locked..
When i manually update through system updater (full ROM of OB7) it not booted OB7 just booted to system recovery And couple of reboot make it to boot OOS 9.0.2 ROM.
Any solution for this ???
Please use the "search" on this forum.
Official One Plus forum:
https://forums.oneplus.com/threads/oxygenos-open-beta-7-for-the-oneplus-6.948155/
- If you are not running open beta software and would like to, please refer to the flashing instructions and the full ROM found on the downloads page here: https://www.oneplus.com/support/softwareupgrade
[email protected] said:
How to update OB7 from OSS 9.0.2 ???
Not rooted , bootloader locked..
When i manually update through system updater (full ROM of OB7) it not booted OB7 just booted to system recovery And couple of reboot make it to boot OOS 9.0.2 ROM.
Any solution for this ???
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/how-to/awaited-android-pie-oxygenos-beta-t3831803
Go through this page
If it still reboot to stable build then try with adb option available in stock recovery
[email protected] said:
How to update OB7 from OSS 9.0.2 ???
Not rooted , bootloader locked..
When i manually update through system updater (full ROM of OB7) it not booted OB7 just booted to system recovery And couple of reboot make it to boot OOS 9.0.2 ROM.
Any solution for this ???
Click to expand...
Click to collapse
if I am not mistaken, to go from stable to beta with locked bootloader will require a full wipe. are you sure you want that? If you had unlock bootloader, we could have done this from twrp without data lose.
MrSteelX said:
if I am not mistaken, to go from stable to beta with locked bootloader will require a full wipe. are you sure you want that? If you had unlock bootloader, we could have done this from twrp without data lose.
Click to expand...
Click to collapse
No bro. it not wipe data tried past ob6.
[email protected] said:
No bro. it not wipe data tried past ob6.
Click to expand...
Click to collapse
I had the same problem. It would only boot to recovery after installing the open beta. What i did was select " Reset System setting" in recovery menu. I didn't have data on my phone so i don't know if it cleared my data or no. But it worked and i am on OB7 now.
phone is currently on 9.0.4 and i've rooted with magisk and using EdXposed. Want to upgrade to 9.0.5 so guys are you facing any issues when you root 9.0.5?
Upgraded to 9.0.5 via TWRP, and rooted using magisk 18.1 with no issue
NH2CH3 said:
Upgraded to 9.0.5 via TWRP, and rooted using magisk 18.1 with no issue
Click to expand...
Click to collapse
Same
Thank you guys, I am following below steps from Funk Wizard guide, I hope it works:
1. Reboot to TWRP (Latest Bluspark recommended)
2. Take a Nandroid of your existing ROM just in case you need it
3. Flash the latest Full OOS Zip
4. Flash the TWRP installer Zip
5. Reboot to RECOVERY to make sure TWRP stays and continue to root.
6. Flash Magisk Stable to maintain root (Avoid Beta)
7. Reboot System and Enjoy the latest firmware without any data loss
Requirements:
1)Make sure you have working TWRP in your OOS pie 9.0.9
2)Download latest bluespark TWRP from the link https://github.com/engstk/android_device_oneplus_enchilada/releases
3)Download Magisk 20.1 from the link https://github.com/topjohnwu/Magisk/releases/download/v20.1/Magisk-v20.1.zip
4)Download android 10 stable rom
Procedure:
1)Boot in to TWRP recovery from your OOS 9.0.9
2)Flash latest bluespark TWRP_twrp-3.3.1-x_blu_spark_v9.107_op6.zip(downloaded from above link)
3)Reboot recovery
4)Flash OOS 10 stable rom
5)Flash latest bluespark TWRP(again)
6)Reboot recovery
7)Flash magisk 20.1
8)Reboot recovery
9)Reboot system
freeshared said:
Procedure:
1)Boot in to TWRP recovery from your OOS 9.0.9
2)Flash latest bluespark TWRP (downloaded from above link)
3)Reboot recovery
4)Flash OOS 10 stable rom
5) Reboot recovery
6)Flash magisk 20.1
7)Reboot recovery
8)Reboot system
Click to expand...
Click to collapse
you should flash twrp again after step 4, otherwise you will face yourself in stock recovery and you won't be able to flash magisk afterwards.
mcdachpappe said:
you should flash twrp again after step 4, otherwise you will face yourself in stock recovery and you won't be able to flash magisk afterwards.
Click to expand...
Click to collapse
Thanks,forgot typing that step in hurry,now updated
Code:
Error applying update: 7 (ErrorCode::kInstallDeviceOpenError)
Updater process ended with ERROR: 1
This is when flashing OOS stable 10 zip. What is wrong?
Kpenguin.5284 said:
Code:
Error applying update: 7 (ErrorCode::kInstallDeviceOpenError)
Updater process ended with ERROR: 1
This is when flashing OOS stable 10 zip. What is wrong?
Click to expand...
Click to collapse
Had the same issue. You have to be on a TWRP meant for android Q.
https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213
Follow this guide for TWRP, if it doesn't boot after using the slightly different ADB command they have, flash 9.0.9, do a local upgrade to A10 through OOS updater, then boot into the TWRP I linked, and then optionally (not neccessary, but going to 10 from 9 without a clean install felt wrong for me), do a clean install of A10 by doing wipe cache, data, and system, and then installing/flashing the A10 zip.
Once installed, don't reboot to system yet, instead see what A/B slot you're in, switch to the other slot that you're not in currently (maybe you have to boot to system first, and then reboot into android 10 twrp through ADB if that doesn't work), and flash magisk and reboot to system. I'm not sure if step #8 is neccesary, but if it is and your device isn't booting, boot into TWRP through ADB and switch into the other A/B slot.
freeshared said:
Requirements:
1)Make sure you have working TWRP in your OOS pie 9.0.9
2)Download latest bluespark TWRP from the link https://github.com/engstk/android_device_oneplus_enchilada/releases
3)Download Magisk 20.1 from the link https://github.com/topjohnwu/Magisk/releases/download/v20.1/Magisk-v20.1.zip
4)Download android 10 stable rom
Procedure:
1)Boot in to TWRP recovery from your OOS 9.0.9
2)Flash latest bluespark TWRP (downloaded from above link)
3)Reboot recovery
4)Flash OOS 10 stable rom
5)Flash latest bluespark TWRP(again)
6)Reboot recovery
7)Flash magisk 20.1
8)Reboot recovery
9)Reboot system
Click to expand...
Click to collapse
if i am using blu_spark extras v9.107 (A10 support) i will not run into any problems i hope.
when updating in Pie, i usualy will disable all magisk modules before updating, did you do that for updating to 10?
ferr4ri said:
when updating in Pie, i usualy will disable all magisk modules before updating, did you do that for updating to 10?
Click to expand...
Click to collapse
Yes, I always uninstall Magisk when flashing any OTA update.
freeshared said:
Requirements:
1)Make sure you have working TWRP in your OOS pie 9.0.9
2)Download latest bluespark TWRP from the link https://github.com/engstk/android_device_oneplus_enchilada/releases
3)Download Magisk 20.1 from the link https://github.com/topjohnwu/Magisk/releases/download/v20.1/Magisk-v20.1.zip
4)Download android 10 stable rom
Procedure:
1)Boot in to TWRP recovery from your OOS 9.0.9
2)Flash latest bluespark TWRP (downloaded from above link)
3)Reboot recovery
4)Flash OOS 10 stable rom
5)Flash latest bluespark TWRP(again)
6)Reboot recovery
7)Flash magisk 20.1
8)Reboot recovery
9)Reboot system
Click to expand...
Click to collapse
Just to be clear, you used TWRP 3.3.1-x blu_spark v9.107 from the Github link? I ask only because I currently have TWRP 3.2.3-x blue_spark and I want to make sure that the 3.3.1-x is for Android 10.
Kpenguin.5284 said:
Code:
Error applying update: 7 (ErrorCode::kInstallDeviceOpenError)
Updater process ended with ERROR: 1
This is when flashing OOS stable 10 zip. What is wrong?
Click to expand...
Click to collapse
Flash the correct TWRP recovery, go through the op once again,I haven't encountered any error,every thing went smoothly
ferr4ri said:
if i am using blu_spark extras v9.107 (A10 support) i will not run into any problems i hope.
when updating in Pie, i usualy will disable all magisk modules before updating, did you do that for updating to 10?
Click to expand...
Click to collapse
I only use busybox module and never disabled it while updating,but i suppose it will be safe to disable the magisk modules to be safe
djkidd said:
Just to be clear, you used TWRP 3.3.1-x blu_spark v9.107 from the Github link? I ask only because I currently have TWRP 3.2.3-x blue_spark and I want to make sure that the 3.3.1-x is for Android 10.
Click to expand...
Click to collapse
Yes use "twrp-3.3.1-x_blu_spark_v9.107_op6.zip"
To be honest, we now got to the point where it's as simple as "Just use the latest Blu.Spark TWRP and do as usual" haha, everything works as it should now !
Thanks for the tutorial.
It's works.
So I need to update from 9.0.2 before following the tutorial or can I jump straight to 10.0.1?
Any recommendations for stable oos 10 rom?
Haven't flashed yet but I've heard magisk 20.1 doesn't work and Android 10, is it working for anyone here?
ryanallaire said:
Haven't flashed yet but I've heard magisk 20.1 doesn't work and Android 10, is it working for anyone here?
Click to expand...
Click to collapse
Currently on Oos 10.0.1 with magisk 20.1 with no issues whatsoever.
Did standard dirty flashing with blu spark twrp 9.107.
Tapatalk'ed over the intertubes from my awesome enchilada
So i tried to follow the guide, but after i installed the full OOS rom, then install TWRP again, it said unsupported android version, and it went downhill from there... I ended using msmtool to recover, maybe it's cuz i used a 10.0.1 rom?
Can anyone confirm if TWRP 3.3.1-x blu_spark v9.108 works with the latest 10.3.1 release? Do I need to even update TWRP or can I stay on the current version?
I am currently on v9.107 with 10.0.1 and I want to update without losing root or data.
dgunn said:
Can anyone confirm if TWRP 3.3.1-x blu_spark v9.108 works with the latest 10.3.1 release? Do I need to even update TWRP or can I stay on the current version?
I am currently on v9.107 with 10.0.1 and I want to update without losing root or data.
Click to expand...
Click to collapse
It works mate
mitas35 said:
It works mate
Click to expand...
Click to collapse
What process did you use to update without losing root and data and did you go from 10.0.1 to 10.3.1?
I am currently on 9.5.9 GM21BA, twrp and magisk installed, bootloader unlocked.
What would be the best way to upgrade to stock 10.0.3, install smurfkernel and xxxnolimits magisk rom?
I would like to do a clean install, wipe all my data first.
Thanks
{s3rious} said:
I am currently on 9.5.9 GM21BA, twrp and magisk installed, bootloader unlocked.
What would be the best way to upgrade to stock 10.0.3, install smurfkernel and xxxnolimits magisk rom?
I would like to do a clean install, wipe all my data first.
Thanks
Click to expand...
Click to collapse
u answered your own question!