I am currently on 9.5.9 GM21BA, twrp and magisk installed, bootloader unlocked.
What would be the best way to upgrade to stock 10.0.3, install smurfkernel and xxxnolimits magisk rom?
I would like to do a clean install, wipe all my data first.
Thanks
{s3rious} said:
I am currently on 9.5.9 GM21BA, twrp and magisk installed, bootloader unlocked.
What would be the best way to upgrade to stock 10.0.3, install smurfkernel and xxxnolimits magisk rom?
I would like to do a clean install, wipe all my data first.
Thanks
Click to expand...
Click to collapse
u answered your own question!
Related
So now that the unofficial Xposed for Nougat is out, has anyone gotten it to work on a rooted stock mate 9?
It looked like it might be just for magisk, but root is via SuperSU for us.
benjmiester said:
So now that the unofficial Xposed for Nougat is out, has anyone gotten it to work on a rooted stock mate 9?
It looked like it might be just for magisk, but root is via SuperSU for us.
Click to expand...
Click to collapse
We have Magisk too
I'm not sure if the magisk module works though.
ante0 said:
We have Magisk too
I'm not sure if the magisk module works though.
Click to expand...
Click to collapse
can u tell me how can we root using magisk i have unrooted before because of apps not running with root
Iloudsan said:
can u tell me how can we root using magisk i have unrooted before because of apps not running with root
Click to expand...
Click to collapse
First off you need to be on a B182+ firmware and flash Twrp 3.1.0-1.
For decrypted (Wipe - 'Format Data' in twrp then back to twrp start screen and Reboot - Reboot recovery, this erases all user data/apps and you need to flash public and hw zip after you've formatted) use the official Magisk 13.3 zip: http://tiny.cc/latestmagisk
For encrypted (no need to format data or do anything special, downside is you won't be able to backup /data partition) use: https://mega.nz/#!I4FQzbyA!gBZelHmD3lGGwzGISUXkf7GQTUAq5i785d_qPHQOaVE
If you have any root flashed currently, flash back stock boot.img before flashing Magisk.
benjmiester said:
So now that the unofficial Xposed for Nougat is out, has anyone gotten it to work on a rooted stock mate 9?
It looked like it might be just for magisk, but root is via SuperSU for us.
Click to expand...
Click to collapse
+1...I have been using Xposed for a long time on all my devices and would love to have it on my Mate 9. I am also rooted via SuperSU.
phone is currently on 9.0.4 and i've rooted with magisk and using EdXposed. Want to upgrade to 9.0.5 so guys are you facing any issues when you root 9.0.5?
Upgraded to 9.0.5 via TWRP, and rooted using magisk 18.1 with no issue
NH2CH3 said:
Upgraded to 9.0.5 via TWRP, and rooted using magisk 18.1 with no issue
Click to expand...
Click to collapse
Same
Thank you guys, I am following below steps from Funk Wizard guide, I hope it works:
1. Reboot to TWRP (Latest Bluspark recommended)
2. Take a Nandroid of your existing ROM just in case you need it
3. Flash the latest Full OOS Zip
4. Flash the TWRP installer Zip
5. Reboot to RECOVERY to make sure TWRP stays and continue to root.
6. Flash Magisk Stable to maintain root (Avoid Beta)
7. Reboot System and Enjoy the latest firmware without any data loss
After recently bricking my Oneplus 6 by trying to flash the latest TWRP on the latest Android 10 OTA from Oxygen Updater, I found a post from official TWRP explaining how root with a10 will take a while to implement due to changes that Google has made to their partitions.
So I guess for anyone trying this out on their own, be warned. You will probably end up bricking your device like I did and will probably end up having a bad time.
Please correct me if i'm wrong though, peace!
Edit: can confirm fastboot flash boot twrp-3.3.1-11-enchilada-Q-mauronofrio.img from the other popular post is working!
If you already have a working TWRP on OOS 9 you should be fine as long as you flash a working TWRP afterwards. Blu_spark TWRP 9.101 is compatible (please not 9.101 no earlier version will work).
Also don't use Magisk 20 only 20.1.
There is already a pre-patched version out there. You can fastboot flash it (as fastboot boot doesn't work). An easier way (without a pre-patched version) is currently being worked one as you pointed out already
just updated to a10
boot into twrp, flash new bluspark twrp
flash FULL ota a10 image
reflash twrp
reboot into twrp
boot into system
boot back to twrp
install magisk 20.1
a10, twrp and root working
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
nightfury04 said:
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
Click to expand...
Click to collapse
havent lost data and you can root again
Blu_spark twrp
could you please provide link for blu_spark twrp img, zip files that work with android 10?
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
nightfury04 said:
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
Click to expand...
Click to collapse
nope
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
akri1337 said:
nope
Click to expand...
Click to collapse
It would be of great help if you could provide link to working TWRP with android 10.
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
akri1337 said:
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
Click to expand...
Click to collapse
Which build did u use mate? R108 is not working with android 9, I tried flashing it using my older installed twrp.
It says unsupported android version. And in github r108 says only for android 10.
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
akri1337 said:
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
Click to expand...
Click to collapse
Thanks again mate.. I will give this one a try.
there is a problem with Magisk 20.1, after all flashes the system is booting ok with Magisk working but after I give first program root access and rebooting its stuck on bootloader and not booting to system.
nightfury04 said:
Thanks again mate.. I will give this one a try.
Click to expand...
Click to collapse
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
nightfury04 said:
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
Click to expand...
Click to collapse
Which magisk? Ver 20.1 ?
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
GunFishin said:
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
Click to expand...
Click to collapse
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
chetbiz said:
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
Click to expand...
Click to collapse
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
GunFishin said:
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
Click to expand...
Click to collapse
Yes, you will need to flash twrp with adb and going through the hole process of installing twrp and magisk, but for me its not worked well, after first boot to Android Q with magisk 20.1 and granting some apps root access when I rebooted the phone its not booting to system and going to bootloader, I think its related to some problem with magisk 20.1.
Hi everyone,
I had recently upgraded to android 10 (clean flash) and installed TWRP and Magisk and everything was fine. However, one fine day, I performed a random reboot and my phone got stuck in a bootloop. I proceeded to boot into TWRP and flashed Magisk uninstaller and the phone booted again. But now, the problem is that every time I try to flash Magisk, I end up in the same bootloop. I am unsure how to get Magisk installed again and I don't want to Clean flash and set up the device all over again.
Please help me out XDA.
Thank you!
ImperatorShade said:
Hi everyone,
I had recently upgraded to android 10 (clean flash) and installed TWRP and Magisk and everything was fine. However, one fine day, I performed a random reboot and my phone got stuck in a bootloop. I proceeded to boot into TWRP and flashed Magisk uninstaller and the phone booted again. But now, the problem is that every time I try to flash Magisk, I end up in the same bootloop. I am unsure how to get Magisk installed again and I don't want to Clean flash and set up the device all over again.
Please help me out XDA.
Thank you!
Click to expand...
Click to collapse
Hello,
Which instruction did you follow?
What version of rom, twrp and magisk did you have? (maybe with file names).
strongst said:
Hello,
Which instruction did you follow?
What version of rom, twrp and magisk did you have? (maybe with file names).
Click to expand...
Click to collapse
Thank you for the response strongst!
I am using the 10.0.1 GM57AA build right now. Updated directly from 10.0.0 by flashing rom in local updater, then without reboot, flashed twrp installer and magisk in inactiv slot, in magisk iteslf (followed your guide and the one Kollachi had put up).
Magisk version is 20.1 and TWRP version is 3.3.1-70.
Everything was working fine for about two months before one reboot started causing the bootloop. (I made no other changes to magisk before this reboot)
Thanks!
ImperatorShade said:
Thank you for the response strongst!
I am using the 10.0.1 GM57AA build right now. Updated directly from 10.0.0 by flashing rom in local updater, then without reboot, flashed twrp installer and magisk in inactiv slot, in magisk iteslf (followed your guide and the one Kollachi had put up).
Magisk version is 20.1 and TWRP version is 3.3.1-70.
Everything was working fine for about two months before one reboot started causing the bootloop. (I made no other changes to magisk before this reboot)
Thanks!
Click to expand...
Click to collapse
Maybe you did have any magisk modules left?
Have you tried an older magisk version?
strongst said:
Maybe you did have any magisk modules left?
Have you tried an older magisk version?
Click to expand...
Click to collapse
Thanks for the fast response! Yes, I tried Magisk 19.3 ver but got the same issue.
ImperatorShade said:
Thanks for the fast response! Yes, I tried Magisk 19.3 ver but got the same issue.
Click to expand...
Click to collapse
And are there any magisk modules or mods left? It can be the reason for this.
Are there any errors within the log while flashing?
You have the twrp guacamole unified from mauronofrio 3.3.1-70, right? You can try 3.3.1-73 if you want.
There were no errors when flashing. But I'm not sure whether I had disabled Magisk Modules before flashing OxygenOS 10. Anyway, what would be the best way to untwrp and clean flash?
Hi
Just looking at rooting and installing twrp and magisk on one plus 7 pro new phone
Can you install twrp and magisk on android 10?
Yes you can. you need the unofficial twrp (version 3.3.1-70, 71 or 72). Magisk will work just fine. It is just a bit painful when you update your phone with a OTA because you will lose root.
haverlok said:
Yes you can. you need the unofficial twrp (version 3.3.1-70, 71 or 72) Magisk will work just fine. It is just a bit painful when you update your phone with a OTA because you will lose root.
Click to expand...
Click to collapse
can you not just Install Magisk to Inactive Slot after OTA? Then you shouldn't lose root after an update.
uhlme said:
can you not just Install Magisk to Inactive Slot after OTA? Then you shouldn't lose root after an update.
Click to expand...
Click to collapse
yes, that's right. You also need to get twrp retention scrip Magisk module flashed after the OTA so you don't lose twrp.