Hi everyone!
Got this Miphone A3 yesterday, and I been searching like a fool after information about this damn phone but it ain't a easy thing to find.
But hey, what do you expect from a cloned iphone
So here's my question:
Anyone sitting on a Miphone and have you done anything with it, most imporant for everything, ROOTED?
Phone info on the phone:
Model number:
A8
Where I bought it, it said A3 on the site (mobino1), same on the battery.
But instead of the iPhone Ui it has the Android Ui pretty sweet that it didnt have the iPhone Ui.
Firmware:
1.5
Don't have Android Market app, but everything looks like Android, also works to install . apk apps tried to install apps from 1.6+ but doesn't work.
Kernel:
2.6.25
Build number:
Linkworld Project .0002_A.1_01r_100129
Been looking for that build number for a while now, don't have any info at all on that one.
Hope some1 here has some info, would be a blessing for me!
EDIT:
I found my way into what i think is the recovery mode, came up a where is said enter flash mode put in usb cable, with red background. Then when i did that, the screen turn blue saying "Enter Flash mode, Begin to flash image..."
Been reading a lot, and i never came up with that kind of "bootloader" just saying that
hope some1 could give me some tips
hi, one of the stores provided firmware from A3, I do not know how fresh. ussd queries are unsuccessful, after ussd calls to hang up. In flash mode turns pressing the upper side volume buttons and switch.
depositfilescom/files/0po3pwcu6 - miphone A3 rom
thanks for that one!
flashed my phone, worked! but it wasnt the same version. this one was with the iphone ui (using ahome)
Model number:
A3
Build number: A3 Project.0001_18r_100411
Seems like my 3G connection does not work with this version. ussd, unsuccessful on this version too, same with previous version.
I was wondering, tried to open the one.bin (flash image) but cannot extract it. Any way to extract the image and try to reconfigure the build?
the phone using "tavor platform" flashing software, anyone know anything about tavor platform?
still trying 2 modify the rom I have, no luck so far.
I do also have this phone from mobino1...
how do you try to modify the firmware you have?
Regards,
xift
miphone a3
I too am with the same problem I have software for Tavor flashing but without success for updated the firmware is in a single bin file without being able to extract and modify
if anyone knows how do to then updated
xift said:
I do also have this phone from mobino1...
how do you try to modify the firmware you have?
Regards,
xift
Click to expand...
Click to collapse
I been trying to extract the .bin file MagicIso can read the file using it "missing files" but can't read the files when extracted. Trying to find a program that could read the rom file, have you done anything to update the phone? Do you have a rom file, if so could you upload it pls?
tried to get the firmware from mobino1 but they just ignore mig those bastards.
Ernest25
miphone a3
I too am with the same problem I have software for Tavor flashing but without success for updated the firmware is in a single bin file without being able to extract and modify
if anyone knows how do to then updated
Click to expand...
Click to collapse
Do you want to flash your phone with the .bin file you already have or do you want to know how to update the phone to android 1.6+?
To flash your phone with tavor flashing software, you need to run the flash program in XP and press "volume up" and "power" on the phone to get to flash mode, then plug in the usb with the flash program open, and it automatically flash the phone.
About updating the phone to a newer version of android I have not a solution.
I been trying to, get info on the hardware so I could try to cook a own rom with at least android 2.0
Cheers
sorry i don't have the firmware as a rom file either...
and these mobino1 bastards ignore me too ^^
although they admitted they could contact the developers...
new firmware would be nice... or at least the current firmware.
I did not downgrade it yet and I think I won't do that.
Another problem could be that the bootloader only runs signed firmware image (just guessing).
I know how to flash I want is a newer room the problem these Chinese are not then updated dependent on us for a updated
(question) has a possibility to use, one firmware and change to a bin file to MiPhone a3
xift said:
sorry i don't have the firmware as a rom file either...
and these mobino1 bastards ignore me too ^^
although they admitted they could contact the developers...
new firmware would be nice... or at least the current firmware.
I did not downgrade it yet and I think I won't do that.
Another problem could be that the bootloader only runs signed firmware image (just guessing).
Click to expand...
Click to collapse
Ernest25 said:
I know how to flash I want is a newer room the problem these Chinese are not then updated dependent on us for a updated
(question) has a possibility to use, one firmware and change to a bin file to MiPhone a3
Click to expand...
Click to collapse
If they just told me straight up, we just sell the phone, we don't have any contact what so ever with the manufacture or developers I would accept it. But this just pissed me off.
I've been asking around on other sites that sells the phone, waiting on answers from them. Hopefully they are more friendly.
Don't downgrade, that was a mistake for me (the rom file azat182 nicely posted).
I tried something yesterday, made a own .bin file with android 2.1 but the flash program wouldn't start with it (parse ini error) so I tricked the flash program that it would flash the one.bin (azat182) rom file.
After it opened I replaced the .bin file with mine. Everything seems to work fine, did every step it should like, root system etc finished 100% when I tried to turn the phone on I couldn't, maybe it didn't know were the power "button" source came from.
The android source was made for an other phone, so I wasn't surprised.
Plugged the usb back in, and luckily the phone connected somehow with the computer so I flash it with the (azat182) rom and I'm back at square -1
but now I think, if I could find out the hardware/drivers on this damn phone it would work to cook a own rom using that method.
Cheers
Oh hey, someone else with one of these phones. I've been messing with mine for a while, started out with the A8 rom (from fastcardtech), and have flashed the A3 rom to the device. I've noticed that the gps works a lot better in the A3 rom than the A8, so it's not much of a downgrade, imo. Recently I've made some headway with an android 2.1 port to the device.
Anyway, this device isn't hard to root. If you adb into it, you can get root from the device by remounting /system as RW and pushing a fixed su binary to /system/bin, or wherever it goes, it's been a while
The MTD partitioning in the Miphone's rom is a big giant mess. The rom is split into 25 partitions, the kernel isn't in boot.img like it's supposed to be, neither are the kernel parameters.
The bootloader is dumb, it doesn't check for signed images. The A3 image and A8 image are both engineering builds.
wow you seem to know a lot about it...
does 3g work for you in the a3 rom? also gps doesn't work for me in a8... so a3 could be a possibility if 3g worked.
how did you adb your phone? I could not connect... the driver just didn't show a phone. although I changed the vendor ids etc...
could you write a short tutorial of some sort? would be nice!
if you are root, couldn't you make a backup of your firmware?
is there a downloadable a8 rom at fastcardtech?
regards, xift
I haven't been able to get 3g working, just edge. I don't think the 3g will work in the US, as none of the carriers will work with just wcdma2100, but I'm no expert on the subject. I've had reasonably good luck with the gps with an app called Maverick, but I don't have a data plan currently, so no agps. With gps alone, it takes about a minute or so in an open area to acquire a lock.
For ADB, there's a driver in the android sdk, but don't bother with it. Instead, the phone's going to show up as a rndis/ethernet gadget. For windows, drivers for this can be found at webos-internals.org/wiki/USBnet_networking_setup, just the .inf is all you'll need; MacOS and Linux will just see the ethernet gadget. Once that's installed, the phone will show up on the PC side as a network interface that will need an IP address; I've been using 169.254.231.10 and subnet 255.255.255.0. Once your network interface is configured, you should be able to run adb connect 169.254.231.168:5555, assuming you've got your android sdk tool set up already. From there, you can adb shell in and poke around. Once you get an adb shell, you'll have a root prompt, but to get 'rooted' so that other android apps can make use of it, you'll want to run adb remount to remount /system as RW, then copy a working version of su over to the phone. I think superuser whitelist comes with one.
I don't usually go to that much trouble, as I end up cycling between the A3 firmware and my Eclair build a lot, and the A3 rom is jacked up to where it's a pain to get a terminal emulator running on it. Adb from my desktop seems to get the most mileage.
Fastcardtech didn't have any useful information about recovery firmware that they had, a release date for an android 2.1 rom, information on the manufacturer, anything.
Wow thanks a lot... I tried with the sdk driver.
port 5555 seemed blocked there although it was obviously responding (took much longer than other ports). Thanks for your help - I'll try that one.
Could you upload your eclaire build?
I don't have much time at the moment because of my bachelor's thesis. But I'd like to see that and maybe I could help a bit. Although I do not have any experience with mobile devices etc.
You may need to mess with the usb debugging option. After flashing to the a3 rom, it's enabled. I remember it being the same between the a8 and a3 roms.
At some point, yeah, I'll my eclair build up. I'd like to at least get bluetooth, gsm and wifi going again before I do. I don't have a rom that you'd be able to flash currently; more like a big pile of build scripts, and install scripts for the android system and ramdisk.
yeah I understand that. You could open a google code project or something.
nice to know that there is somebody working on this.
usb debugging is enabled by default. I'll just have to try again.
thanks for your help so far.
file inf
I not have disk only cd and dvd when I will install the drive without the disk says no drive found I save the file as usbnet-pre.inf
if anyone can help me pls
well I also had problems installing the driver in windows ...
It always said something like "No driver found at that location".
You could try on linux though... It worked like a charm for me.
I'm root now
@nsigma is there anything I could provide you from the a8 image?
xift said:
well I also had problems installing the driver in windows ...
It always said something like "No driver found at that location".
You could try on linux though... It worked like a charm for me.
I'm root now
@nsigma is there anything I could provide you from the a8 image?
Click to expand...
Click to collapse
linux complicated for me but thank you I hope good news from you about how root this bastard mobile
I have the A3 if you're interested I can pass to you
Please note that you are doing all this at your own risk and i am not responsible for any damage caused during the
process. Dont do it if you dont know what you are doing.
Hi Guys as this is my first post on XDA about rooting and stuff so please dont be harsh. I am not a developer. i am just sharing all this here from different sources which i found out by doing a lot of search and wasting a lot of my precious time
So i thought i will open a separate thread for this phone as i could not see a single post on this phone. Ok i have found out how to Root this phone, installing CWM and also i have found a custom ROM so i thought i will post it here so that it can help others.
Phone Model Number : Star N9880
Varients : Upai N9880, Viewsonic 9880
Specs
- 6 inch capacitive touchscreen
- Android 4.0.3 OS, support Google Play
- Support WiFi, GPS, TV, dual SIM card slot
- Support 3G network: GSM 850/900/1800/1900 & WCDMA 850/2100 MHz
- 5MP back camera + 0.3MP front camera
- Support dual SIM cards at same time,
- Multi-language: English, French, Spanish, Portuguese, German, Italian, Russian...
Phone Style: Bar, multi-touch screen, 6 inch Capacitive touchscreen
Operating System: Android 4.0.3 OS
Processor: MTK MT6575, 1GHz, ARM Cortex A9
Display
Screen Size: 6" touchscreen
Display reulotion: WVGA screen, 800*480 pixel
Color Support: 265K colors
Screen Technology: Multi-touch screen
Camera
Camera Resulotion: 5MP back camera + 0.3MP front camera, digital zoom
Memory
Built-in Memory: 2GB ROM / 512MB RAM,
Memory Card: Support microSD/microSDHC memory card, up to 32GB, support App2SD
Size
Dimensions:144 * 84 * 13mm
Weight: 205g
What in package
1 * N9880 Android Phone
1 * Travel Charger
1 * USB Data Cable
1 * Headphone
1 * Manual
2 * Battery and a Flip case.
Rooting the phone :
http://www.4shared.com/rar/5tilx4YQ/40root.html
1.Please download root file from the link above.
2.Go to settings-developer options-click USB debugging.
3.Connect the phone with computer,turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat
5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two times.Click enter then phone was rooted.
7.You will see two more app was installed in your phone that means root phone successfully.
Installing CWM recovery :
Check out this post to learn how to use the SPflash tool http://bm-smartphone-reviews.blogspot.it/2012/05/mt6575-flashing-tutorial.html#comment-form
1) After rooting the phone download the SP flash too from here http://www.4shared.com/folder/Q_MYd0k_/MT6516_Tools.html Password : bm-smartphone-reviews.blogspot.com
( Courtesy : http://bm-smartphone-reviews.blogspot.it/2012/05/mt6575-flashing-tutorial.html#comment-form )
2) And download CWM recovery file from here http://www.4shared.com/folder/w9iaxGla/upai-n9880.html and unzip in a folder.
3) switch off the phone and take out the battery. ( Dont put the battery back )
4) Open the Flash tool and click on the scatter-loading button and then load the "MT6575_Android_scatter_emmc" file from the CWM recovery folder.
5) Just click on the download button and let it complete the process. Put the battery back and now hold the volume up button and power button together until the screen switches on and now you must see CWM recover installed.
Installing the Taiwan upai N9880_ICS_V.01
After installing this ROM camera flash is not working. But i dont really know if its an issue with the
ROM or a hardware issue. So please be prepared and dont blame for any damages
1) Now download the ROM from the link below and place in the SD card.
http://www.4shared.com/zip/SY9YRgTr/Taiwan101-UPAI-N9880_ICS_V01.html
2) Boot in to recovery mode ( Power off the phone, hold the volume up and power button until the phone power on and then leave the buttons)
3) Select the Taiwan ICS zip and update and just sit back for the process to complete. Once the it finishes the process reboot the phone and the phone will now reboot with the HTC one boot animation
Now Enjoy the phone
Feel free to ask me any doubts if you have.
wow.
shri080 said:
Please note that you are doing all this at your own risk and i am not responsible for any damage caused during the
process. Dont do it if you dont know what you are doing.
Hi Guys as this is my first post on XDA about rooting and stuff so please dont be harsh. I am not a developer. i am just sharing all this here from different sources which i found out by doing a lot of search and wasting a lot of my precious time
So i thought i will open a separate thread for this phone as i could not see a single post on this phone. Ok i have found out how to Root this phone, installing CWM and also i have found a custom ROM so i thought i will post it here so that it can help others.
Phone Model Number : Star N9880
Varients : Upai N9880, Viewsonic 9880
Specs
- 6 inch capacitive touchscreen
- Android 4.0.3 OS, support Google Play
- Support WiFi, GPS, TV, dual SIM card slot
- Support 3G network: GSM 850/900/1800/1900 & WCDMA 850/2100 MHz
- 5MP back camera + 0.3MP front camera
- Support dual SIM cards at same time,
- Multi-language: English, French, Spanish, Portuguese, German, Italian, Russian...
Phone Style: Bar, multi-touch screen, 6 inch Capacitive touchscreen
Operating System: Android 4.0.3 OS
Processor: MTK MT6575, 1GHz, ARM Cortex A9
Display
Screen Size: 6" touchscreen
Display reulotion: WVGA screen, 800*480 pixel
Color Support: 265K colors
Screen Technology: Multi-touch screen
Camera
Camera Resulotion: 5MP back camera + 0.3MP front camera, digital zoom
Memory
Built-in Memory: 2GB ROM / 512MB RAM,
Memory Card: Support microSD/microSDHC memory card, up to 32GB, support App2SD
Size
Dimensions:144 * 84 * 13mm
Weight: 205g
What in package
1 * N9880 Android Phone
1 * Travel Charger
1 * USB Data Cable
1 * Headphone
1 * Manual
2 * Battery and a Flip case.
Rooting the phone :
http://www.4shared.com/rar/5tilx4YQ/40root.html
1.Please download root file from the link above.
2.Go to settings-developer options-click USB debugging.
3.Connect the phone with computer,turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat
5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two times.Click enter then phone was rooted.
7.You will see two more app was installed in your phone that means root phone successfully.
Installing CWM recovery :
Check out this post to learn how to use the SPflash tool http://bm-smartphone-reviews.blogspot.it/2012/05/mt6575-flashing-tutorial.html#comment-form
1) After rooting the phone download the SP flash too from here http://www.4shared.com/folder/Q_MYd0k_/MT6516_Tools.html Password : bm-smartphone-reviews.blogspot.com
( Courtesy : http://bm-smartphone-reviews.blogspot.it/2012/05/mt6575-flashing-tutorial.html#comment-form )
2) And download CWM recovery file from here http://www.4shared.com/folder/w9iaxGla/upai-n9880.html and unzip in a folder.
3) switch off the phone and take out the battery. ( Dont put the battery back )
4) Open the Flash tool and click on the scatter-loading button and then load the "MT6575_Android_scatter_emmc" file from the CWM recovery folder.
5) Just click on the download button and let it complete the process. Put the battery back and now hold the volume up button and power button together until the screen switches on and now you must see CWM recover installed.
Installing the Taiwan upai N9880_ICS_V.01
After installing this ROM camera flash is not working. But i dont really know if its an issue with the
ROM or a hardware issue. So please be prepared and dont blame for any damages
1) Now download the ROM from the link below and place in the SD card.
http://www.4shared.com/zip/SY9YRgTr/Taiwan101-UPAI-N9880_ICS_V01.html
2) Boot in to recovery mode ( Power off the phone, hold the volume up and power button until the phone power on and then leave the buttons)
3) Select the Taiwan ICS zip and update and just sit back for the process to complete. Once the it finishes the process reboot the phone and the phone will now reboot with the HTC one boot animation
Now Enjoy the phone
Feel free to ask me any doubts if you hav
my nmottum e is tim i want to buy this phone ,but i need to know if the little symbols at the bottom of the phone lite up when you touch them. and as you already know some of those china phones dont have good signal strength, does this one? thank you for the post of all the goodies for this phone. i have looked thought alot of sites trying to find rooting guides, flash tools and only found the root zip. SO THANK YOU SUPER SMART DUDE THAT IS SUPER COOL!!!!!!!
Click to expand...
Click to collapse
Haha thanks dude Yes even i had the same exact doubt before i bought it. It lights up when u touch it and its very nice and the signal strength is also pretty good. but the call quality is ok though. The only thing i dint like in this phone is the viewing angle which is bad. But other than that this is a very good phone. especially the build quality is lovely and also the flip case you get with it is very nice.if you like big screen u can try this out. You can check out my Unboxing video here http://www.youtube.com/watch?v=fgQkmNDlp9U all the best
hey
shri080 said:
Haha thanks dude Yes even i had the same exact doubt before i bought it. It lights up when u touch it and its very nice and the signal strength is also pretty good. but the call quality is ok though. The only thing i dint like in this phone is the viewing angle which is bad. But other than that this is a very good phone. especially the build quality is lovely and also the flip case you get with it is very nice.if you like big screen u can try this out. You can check out my Unboxing video here http://www.youtube.com/watch?v=fgQkmNDlp9U all the best
Click to expand...
Click to collapse
there is the other guy that said the same thing that it had bad viewing angle. but i dont understand? do you mean looking from the side, it does nt look good or what!!!! i think i found someone who has the mtk6577 1gb ram version. i ordered it last night. it was only 215$ shipped ems. so we will see. i wonder if it is what this guy says it is, if the rooting steps the same.
Hey check this one out i think im going to try and get both. Its called a C3 note2!!!!
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
bobo31 said:
there is the other guy that said the same thing that it had bad viewing angle. but i dont understand? do you mean looking from the side, it does nt look good or what!!!! i think i found someone who has the mtk6577 1gb ram version. i ordered it last night. it was only 215$ shipped ems. so we will see. i wonder if it is what this guy says it is, if the rooting steps the same.
Click to expand...
Click to collapse
as my knowledge goes you can not do the same procedure to root MTK6577. Bad viewing angle meaning the image or the video almost blacks out from a side angle which can be sometimes really annoying. And btw did u receive your phone?
After a few week I use n9880 with dual core CPU 6577 version..
I found some problem here..
-.The screen solution not so good,I can see a horizontal line on screen,I don't know it a ROM problem or a screen problem.Maybe If I can try new rom it'll fix the problem or not?!?
-.It not good to watch your screen from the top side.It'll look more dark.
-.Battery gone fast.
-.I try to jack the iphone earphone to n9880 6577 hole to listen the music on iphone earphone.But the speaker alway speakout the same time with the earphone.That speaker should be mute,But it's not! I didn't try the earphone from n9880 yet.So not sure will it have the same problem or not?!
-.Spec showed 2.5Gb of rom space(actually 4Gb) but when I install more app,It's was full at 500Mb only?!? I don't know why?? And I think that should be fix by root and find new rom.
-. I don't know what is the best rom for now,The camera and flash not work or some rom.So any news please update here.
Hey!!!
ther is a sight i have been going to it is called mobileuncle.com. translate the page and type in search on site,n9880mtk6575 or mtk6577 or n9970 or n9977. these are all the same phone pretty much. this site shows how to do what ever u want to do with your phone. it does have a rom or something that you can brush the 2.5gb rom and take away the lines. go look and see. thanks
---------- Post added at 01:01 PM ---------- Previous post was at 12:59 PM ----------
vidsava said:
After a few week I use n9880 with dual core CPU 6577 version..
I found some problem here..
-.The screen solution not so good,I can see a horizontal line on screen,I don't know it a ROM problem or a screen problem.Maybe If I can try new rom it'll fix the problem or not?!?
-.It not good to watch your screen from the top side.It'll look more dark.
-.Battery gone fast.
-.I try to jack the iphone earphone to n9880 6577 hole to listen the music on iphone earphone.But the speaker alway speakout the same time with the earphone.That speaker should be mute,But it's not! I didn't try the earphone from n9880 yet.So not sure will it have the same problem or not?!
-.Spec showed 2.5Gb of rom space(actually 4Gb) but when I install more app,It's was full at 500Mb only?!? I don't know why?? And I think that should be fix by root and find new rom.
-. I don't know what is the best rom for now,The camera and flash not work or some rom.So any news please update here.
Click to expand...
Click to collapse
Pull your batt. and see what the model number say. it just might be the n9970 vresion of this phone!
There seems to be a very similar 6" Android phone out there under various brand names and usually called the i9977, with some versions -- but not all -- claiming a Super AMOLED screen. If it indeed uses a Super AMOLED screen, the side views shouldn't be bad.
I can't post links, but search YouTube for "i9977 mt6577 English" and you'll find a video showing the screen on this phone.
There's also the N9776 which claims, again in some versions, to have an AMOLED screen.
Hey!!!
i think im going to get this!!! C3
bobo31 said:
ther is a sight i have been going to it is called mobileuncle.com. translate the page and type in search on site,n9880mtk6575 or mtk6577 or n9970 or n9977. these are all the same phone pretty much. this site shows how to do what ever u want to do with your phone. it does have a rom or something that you can brush the 2.5gb rom and take away the lines. go look and see. thanks
---------- Post added at 01:01 PM ---------- Previous post was at 12:59 PM ----------
Pull your batt. and see what the model number say. it just might be the n9970 vresion of this phone!
Click to expand...
Click to collapse
Thank you, my phone is n9970,And I was try to find the info in mobileuncle already. they are all chinese language,And google translate not make me understand it correct?! I not sure which one is the last Rom that work very well,and I don't know how to make image recovery file before I root the phone. I want to back up it all as image file. Please tell me where can I find step by step for root , make image file and setup new rom for n9970 in english version.please help..
Thank you
Hey!!!
vidsava said:
Thank you, my phone is n9970,And I was try to find the info in mobileuncle already. they are all chinese language,And google translate not make me understand it correct?! I not sure which one is the last Rom that work very well,and I don't know how to make image recovery file before I root the phone. I want to back up it all as image file. Please tell me where can I find step by step for root , make image file and setup new rom for n9970 in english version.please help..
Thank you
Click to expand...
Click to collapse
I saw this today i think it will help! go here: http://hi.baidu.com/esocu/item/c1279ad94eda283be2108f5e
HEY!!!!!
Check this out!!!! http://products.mobileuncle.com/forum.php?mod=viewthread&tid=199890&highlight=n9880 it is for the n9880 mtk6577 which is the N9970:good:
Hey!!!
vidsava said:
Thank you, my phone is n9970,And I was try to find the info in mobileuncle already. they are all chinese language,And google translate not make me understand it correct?! I not sure which one is the last Rom that work very well,and I don't know how to make image recovery file before I root the phone. I want to back up it all as image file. Please tell me where can I find step by step for root , make image file and setup new rom for n9970 in english version.please help..
Thank you
Click to expand...
Click to collapse
I found this phone and i really would like to get it, do you like it? And when you get calls can you hear the other people loud and clear? How long does batt last? I think I AM NOT FOR SURE BUT, I dont see why you cant use the android kitchen to make your own rom. it seems kinnda easy to do.
bobo31 said:
I found this phone and i really would like to get it, do you like it? And when you get calls can you hear the other people loud and clear? How long does batt last? I think I AM NOT FOR SURE BUT, I dont see why you cant use the android kitchen to make your own rom. it seems kinnda easy to do.
Click to expand...
Click to collapse
It's have a few problem to me.But I still love it.
- Horizontal line alway show full screen.
- rubber at border of the flip cover was easy damaged.And it's not look good now.
- when I call the speaker is not so loud,I think my HTC HD2 are louder,But voice so clear.
- Wifi are weaker than HTC HD2,I use at the same time hd2 show 2line signal,but n9970 less than that.
- after charge batter full,I use wifi and watch youtube and use speaker ,It's can work about 3-4 hours,That ok for me
- Rom can work only 502Mb,Need to use 2.5gb as spec said.But I don't know what is the best rom now?
- lastest Rom on china webboard still have a problem on flash and camera.So I wait for better rom.
- watch screen from above side are so bad dark.
I don't know about android kitchen and how to make my own rom, So If you get n9970 please make the best Rom for me too.
I have very less time to learn it.
Thank you very much.
Hi
vidsava said:
It's have a few problem to me.But I still love it.
- Horizontal line alway show full screen.
- rubber at border of the flip cover was easy damaged.And it's not look good now.
- when I call the speaker is not so loud,I think my HTC HD2 are louder,But voice so clear.
- Wifi are weaker than HTC HD2,I use at the same time hd2 show 2line signal,but n9970 less than that.
- after charge batter full,I use wifi and watch youtube and use speaker ,It's can work about 3-4 hours,That ok for me
- Rom can work only 502Mb,Need to use 2.5gb as spec said.But I don't know what is the best rom now?
- lastest Rom on china webboard still have a problem on flash and camera.So I wait for better rom.
- watch screen from above side are so bad dark.
I don't know about android kitchen and how to make my own rom, So If you get n9970 please make the best Rom for me too.
I have very less time to learn it.
Thank you very much.
Click to expand...
Click to collapse
I ordered the n9970 mtk6577 phone today. I hope to have it soon.
Check this out!!!!!
bobo31 said:
I ordered the n9970 mtk6577 phone today. I hope to have it soon.
Click to expand...
Click to collapse
This is what i found about the N9970 I hope some one here can make better since of it!
European musical styles N9770
mtk6577 the
ANDROID version 4.09
version number: e1809_v77_gq1008_5647_20120810
the first time at the uncle tutorial posts, share their own experiences!
Let us talk about before I have a 6575 version of n8000, due to the brush wrong the rom completely brick then bought n9770 , due to the relationship between n8000 Brush has changed careful, I remind brush body of the faithful, when you see someone sharing Brush Pack , if not too much description, or say what shared version, please be especially careful, because the brush of a the aggregate n8000 the rom, later found that rom can not find the driver file, it is estimated that because so dead, so before you brush is best to find their own mobile phone version of the original rom before considering the the root machine or brush package.
I n9770 0810 version rom in N9770- 20120810_e1809c_v77_gq1008_5647.zip, can be found within the forum, by the test brush to restore completely the same with me before, so if the 0810 version of the Friends of the Brush, due to brush the root package , the phone found a problem, then restore the factory version of this package can be heavy brush heavy new root machine. As far as I know, n9770 before some versions, rom package the final figure is not 5647, but 9p017, 9p017 version rom is basically the same with me before 6575 n8000 rom package after digital, that is to say, n9770 version of the phone if it is a the 9p017 version of the basic hardware of the phone is the choice of N8000 hardware, such as after the camera and capacitive screen driver related to the 5647 version of different, if found phone camera malfunction, or splash screen, the resolution is very low perhaps chose the wrong drive moving or wrong brush the package by the 0810 version of the mobile phones brush rom version before the former version does not have the latest driver.
Following share my Brush steps, I will separate the several parts to illustrate that contains the driver installation, heavy brush factory, wire brush the root machine, Uncle tools to recover part of the IMEI, etc.. . . . .
Prepare the following documents, all files are to come back from the forum
First: drive installation method
the first step: first solve the driver problem,
I Window7 phone open, the system will find the new hardware on the 6577 USB driver installed, installed after the following figure,
This is when, if you have to install the the good bowl pods phone platform to see if I can connect the phone, no problem, after the completion of the first step. If not successful, try also can download other drivers to try again (6575's drive), this drive is mainly used to identify in the computer system , used in such third-party phone platform.
Step two: is more important, wire brush must do this step,
open the [Device Manager] computer, then phone off, remove the battery, connect the data cable, the system will issue a "must" sound, sound may not stop repeat, may stop connection break, after a look at the Device Manager port is open and the installed driver, if it is an exclamation point, right point update 6577 USB driver installed following figure.
This drive is mainly to identify hardware connection port, the software need to find the wire brush the port to brush package.
If you try to look online before the installation of the driver can not use, compatible with 6575 can also manually update, click "install from disk" methods such as the following diagram.
Second step install the driver failed to download the following driver installation, this drive xp, vista, the
VCOM driver 6575and6577.rar win7 USB
manntim31, If you want to see this post hidden content, please Reply
. . . . . . . . . . . . . . . . . . . . . . . .
Part II: The wire brush original ROM method
method is basically the two kinds
first one is able to open the phone, the splash screen, or other hardware failure and other spirits in heavy brush recovery.
The second is not open the phone to save the machine.
The first original Brush normal recovery methods:
1. Computer port driver installed first
. Phone off Remove the battery
3. Original line brush ROM package
4. SP_mdk software
SmartPhone Multi-port Download Tool brush back to the factory settings, the benefits of this software allows you to select the drive automatically.
Steps: the computer after the driver has been installed, so that you can brush machine, remove the first cell phone battery, to open sp_mdt software Brush with 9770-20120810_e1809c_v77_gq1008_5647 original package
. Press the Scatter File],
2. Select the original package boot file MT6577_Android_scatter_emmc.txt
3. [Select screen and camera,
4. Press [Unlock], select the drive (see below)
I have the 0810 version of the driver, rear lens: ov5647 front lens: hi704_yuv screen drive: RX_50NT_415B
5. SelAll tick
6. Figure for the right
7. (Check again)
8. Do not connect your phone, press Start all
9. (You can see the start countdown)
10. Phone off remove the battery to access the data line, after the software to find the port brush package, wait for brush package completed
Congratulations! ! . Picture below represents brush package completed, Stop all, remove the data lines, re-open the phone to see!
(Take a look around the money head is normal, there is no splash screen, the Friends of the 0810 version of the machine in general, it should be no problem, as the problem , on behalf of your phone may be an earlier version of the hardware, try to re-brush package, choose other drive, or not, may 9p017 number of tail version, it is possible the driver: mt9p017_raw [This is a hardware-based n8000], the 0810 version of the package is not there, you can download other versions of rom package to brush look at, think about yourself when to buy)
PS: last mention a successful brush package, open play original rom folder, you see the found
uboot_e1809c_v77_gq1008_5647.bin the file has been modified,
This is based on you select the other drive as the boot file to save, if you again to brush this packet to use another SP_flash_tool software, you will find not selected drive situation state there is no splash screen, can explain why a lot of friends with appears after the splash screen is like SP_flash_tool software brush machine.
The second is not open the phone to save machine
usually this situation is chaotic brush rom, or the driver is not installed, such as a break caused mostly. To brush back conditions is also found that the hardware of the computer connected to dismantle electric phone, or is no reaction, the gods can not put out.
1. Computer port driver installed first
. Phone off Remove the battery
3. Original line brush ROM package
4. Use mobile the uncle SP_Flash_Tool_v3.1222.00 software
steps:
1. The First Open mobile uncle SP_Flash_Tool_v3.1222.00,
. Select the Scatter-Loading
3. Select the boot file
4. All of the following documents full tick
5. To prepare phone removed the battery, first not access the data line, press the Download
6. Below to start searching, then access the data line
7. The software automatically Brush bag, waiting to complete
8. Green circle is completed there will be representatives completed! Open the phone and see! !
SmartPhone Multi-port Download Tool fact, this approach should also be able to use the first method to deal with, just download the version format / download can be used, like this software uncle solve, if after brushing phone has been able to open but appear splash screen or lens malfunction, then the first method to select the drive to paint again. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part III wire brush root method first talk n9770 root machine before, a key the root tool completely different root tools are the root file is sent to the phone directory specified, so no hard drive
and any file, replace. But now due to technical problems, the only line brush resolved, therefore must place the crack boot.img (contains the root file) straight brush into the phone, while the root file boot.img, it seems that, The 0710 version, after joining the root file repackaged, as far as I know, n9770, from 0705 to 0713, the rom package version number of the tail are 9p017, 0725 and the end of 0810 the number is 5647, has said 9p017 version is based on n8000 hardware for the upgrade, so the hardware is old driver, 9p017 version of the package is not as if 5647 the new version of the driver, and the 5647 version of the package without 9p017 old driver, a lot of people, chaos is chaos here, so 0725 and later versions of root brush replaced the earlier version of the brush into the cause splash screen, camera failure, the most simple way is to root and then their own original boot.img version from the new brush into time substitutes a while to not remove the root file, so normal, the truth is safe. As long as the know is of 9p017 still 5647 version, so you should know to download that rom use that drive to brush package, the problem will be reduced. ps: the principle problem, so when you use the wire brush root , restore the original file and driver version is more important, please find their own versions, such as uncertainty, think about when to buy and download the same period original package, make sure can find the you need, no splash screen, such as the failure problem root forum have all versions of the package, the can down try, otherwise such a key root tool only root machine it! Even if not the root problem , just brush original package to restore and driving problem has led to a lot of people headaches headache is because you have the wrong version of the original package, due to driver problems, as long as you drive your original package should be no problem, do not see the new version of chaos brush.
Know the version
20120705_e1809c_v77_gq1008_ 9p017
20,120,713 e1809c-v77-gq1008- 9p017
20120725_e1809c_v77_gq1008_ 5647
20120810_e1809c_v77_gq1008_ 5647
9p017 version available with the following drivers
The 5647 version of the following drive
Following the 0810 version of the brush method
PS: I brush root before SmartPhone Multi-port Download Tool, election 0810 version of the driver, restore factory version, when the IMEI is normal PS: Note, in each brush when the package is completed, the software has been completed, do not rush to remove the data cable, before the removal of the first to hear the USB disconnection sound after, and then stop the software, turn off the software only remove the USB, which is a good habit!
1. Ready to the Oral wind N9770 boot file
2. Open mobile uncle SP_Flash_Tool_v3.1222.00 is
3. Phone off Remove the battery is the first step decompression the Oral wind N9770 boot.rar There is a boot.img (creation date 2012-07-10, means BOOT crack under the 0710 or previous version), if not The boot file uboot_e1809c_v77_gq1008_5647.txt direct COPY of the original on the Oral wind N9770 boot folder inside. The second step mobile uncle SP_Flash_Tool_v3.1222.00 opens Scatter Loading, select Oral wind N9770 boot folder inside the boot file
Opens, you will see a boot.img tick, and then press Download
At this time, if the aphorisms prompted, press ok it
Saw searching, it will tear down the cell phone battery to insert the data cable, brush package began
Wait for the the DOWLOAD OK green circle out on completion of the
Replace the battery after open the phone to run it once (must first boot time), the
splash screen now. . . . Let it
then take a look there the superuser and uncle Tools, after brushing should have been there, turn off the phone, removed the battery! Continue with the next
step
mobile uncle SP_Flash_Tool_v3.1222.00 for the painted original BOOT.img
above, Scatter Loading, open the original ROM file folder, and select the boot files,
after only tick the boot.IMG other cancellation Figure
After Dowload, after waiting for seaching appear, insert the data line (phone off demolition electrical state), automatic brush boot until the green circle appeared complete. Re-open the phone to see if all normal, no splash screen, front and rear lens normally has installed superuser and mobile uncle Toolbox, phone, open the Toolbox, look to have root! IMEI is all normal, this is the first root.
After this, I try to brush the original package once, in the second accident, I do not know the reason for the port are disconnected, things did not brush into the dead! ! Can not phone, the heavy brush does not work, is the brush does not go in, but fortunately, the computer can also find equipment last. . . . . . . . Hee hee hee! Course to life, but the phone re-opened imei will invalid, relevant, how to deal with the back say.
Part IV uncle tools restore IMEI first description with Uncle tools to restore the IMEI, I have a backup the IMEI to recover If you do not have a backup file, many online teaching methods to restore the IMEI, the premise has ROOT. I only own briefing. PS: I ROOT for the first time after the success of IMEI did not fall on the first time backed up with Uncle tools, I lost IMEI is in the second condition only IMEI valid, invalid does not mean or call .
My approach is to first update uncle Tools Forum has released version of the the "mobile uncle Toolbox V2.2.0-0813" to support the 6577 phone, pictures
Recovery must have ROOT
enter the IMEI backup and recovery (MTK) you will see the file in the backup file md5 SD card with the above machine md5 is different, select the last restore the IMEI sd2 card, select Restart
To finalize
The fifth one this special treatment practices
sometimes appear, are usually driven not installed package brush out of the question, brush the wrong package, Brush usb break, are likely to cause the phone can not open this heavy brush when you then what software or update usb drive non-stop, in the end will find what brush does not go in, is the brush for a while, in the second situation, the port is stopped, then I sure the phone system, so the phone is turned on can not be able to find the port, usb connection, but re-brush is the brush does not go in there a port error problem, when I Another approach is to use the "mobile uncle SP_Flash_Tool_v3 .1222.00 ", the first re-Format phone, then you can use the top of the first and second method used DOWNLOAD reinstall the system, but after IMEI invalid and somehow save the phone in the state of radio , the computer can be found in hardware, mobile phones are not bricks and mortar, the Format is the ultimate method. This method when I n8000 has repeatedly trial, the most important thing is to brush some unknown rom or different mobile phone models package. The final solution, the best Freeze brush did not grasp the package, risk, or some non-essential not to use this method. Out of the situation, as shown in
The ultimate format **
This action will be completed after direct use Dowload,
like a brush to re-package in accordance with Method 2, so alive. PS: If you connect the phone did not find the hardware, I approach, repair it, I N8000 is dead brick waiting to be serviced. Mention one, n9770 though it is a phone model, but is in fact a mobile phone, n9770-9p017 n9770-5647, the use of such understanding on the best 9p017 latest version should be 2012-07-13 right 5647 latest should be 2012-08-10. Maybe there is a method you can let 9p017-0713 version into 9p017-0810 version, the 0810 version is to heavy brush, very possible will splash screen, after re-root machine, again after the SmartPhone the Multi-port Download Tool software single brush 0713 version rom within 3 files, first create a new folder to copy the past, the first one is the boot file: MT6577_Android_scatter_emmc.TXT second is the the boot.img third is uboot_e1809c_v77_gq1008_9p017.BIN (This file is not a driver can not choose) Although such can select the the 9p017 drive but actually what will happen I do not know, to see if there is no one to try it, but if as a brick . . . . . . . Please do not come to me in trouble! ! ! ! Honest, personal feel no need to feel not much different, and does not replace the 0810 version is the same as not able to play the game, not because of the update of the 0810, the phone will fly, so to think of it! Hardware anyway, can not replace. . . . Above content can help a friend to learn more about the situation, select the desired means wish brush package successfully! ! ! Winners please share Replies to talk about my own cell phone, with what version of the package, choose what drive, so multi-benefit of latecomers! Thank you, thank! !
Reviews
Rui Qi is not simple to the very time a teaching text ~ Moderator Big Brother and quick Medal! ~ Posted at 2012-9-10 02:09
◆ ◆
Here is a quick reply, and quickly try Oh
I know
post_newreply
3 people have rated Flights Less reason
cjsoong + 10 Is a force!
knight1082 + 10 Is a force!
Rui Qi + 10 Too detailed to estimated 2-3 hours to the birth of this article to
Total score: Flights + 30 View all ratings
2012-10-28 20:04 set highlighted this topic by sonpost
Share:
QQ space
Tencent microblogging
Tencent friends
Favorite
top
step one foot 0
ratings
[Welcome to] to 〖mobile uncle - Oral wind N9770 District〗
Reviews Reply Report
---------- Post added at 09:11 PM ---------- Previous post was at 08:41 PM ----------
This is the link! http://products.mobileuncle.com/thread-199693-1-1.html:laugh:
STOP!!!!!! read!!!!!
bobo31 said:
This is what i found about the N9970 I hope some one here can make better since of it!
European musical styles N9770
mtk6577 the
ANDROID version 4.09
version number: e1809_v77_gq1008_5647_20120810
the first time at the uncle tutorial posts, share their own experiences!
Let us talk about before I have a 6575 version of n8000, due to the brush wrong the rom completely brick then bought n9770 , due to the relationship between n8000 Brush has changed careful, I remind brush body of the faithful, when you see someone sharing Brush Pack , if not too much description, or say what shared version, please be especially careful, because the brush of a the aggregate n8000 the rom, later found that rom can not find the driver file, it is estimated that because so dead, so before you brush is best to find their own mobile phone version of the original rom before considering the the root machine or brush package.
I n9770 0810 version rom in N9770- 20120810_e1809c_v77_gq1008_5647.zip, can be found within the forum, by the test brush to restore completely the same with me before, so if the 0810 version of the Friends of the Brush, due to brush the root package , the phone found a problem, then restore the factory version of this package can be heavy brush heavy new root machine. As far as I know, n9770 before some versions, rom package the final figure is not 5647, but 9p017, 9p017 version rom is basically the same with me before 6575 n8000 rom package after digital, that is to say, n9770 version of the phone if it is a the 9p017 version of the basic hardware of the phone is the choice of N8000 hardware, such as after the camera and capacitive screen driver related to the 5647 version of different, if found phone camera malfunction, or splash screen, the resolution is very low perhaps chose the wrong drive moving or wrong brush the package by the 0810 version of the mobile phones brush rom version before the former version does not have the latest driver.
Following share my Brush steps, I will separate the several parts to illustrate that contains the driver installation, heavy brush factory, wire brush the root machine, Uncle tools to recover part of the IMEI, etc.. . . . .
Prepare the following documents, all files are to come back from the forum
First: drive installation method
the first step: first solve the driver problem,
I Window7 phone open, the system will find the new hardware on the 6577 USB driver installed, installed after the following figure,
This is when, if you have to install the the good bowl pods phone platform to see if I can connect the phone, no problem, after the completion of the first step. If not successful, try also can download other drivers to try again (6575's drive), this drive is mainly used to identify in the computer system , used in such third-party phone platform.
Step two: is more important, wire brush must do this step,
open the [Device Manager] computer, then phone off, remove the battery, connect the data cable, the system will issue a "must" sound, sound may not stop repeat, may stop connection break, after a look at the Device Manager port is open and the installed driver, if it is an exclamation point, right point update 6577 USB driver installed following figure.
This drive is mainly to identify hardware connection port, the software need to find the wire brush the port to brush package.
If you try to look online before the installation of the driver can not use, compatible with 6575 can also manually update, click "install from disk" methods such as the following diagram.
Second step install the driver failed to download the following driver installation, this drive xp, vista, the
VCOM driver 6575and6577.rar win7 USB
manntim31, If you want to see this post hidden content, please Reply
. . . . . . . . . . . . . . . . . . . . . . . .
Part II: The wire brush original ROM method
method is basically the two kinds
first one is able to open the phone, the splash screen, or other hardware failure and other spirits in heavy brush recovery.
The second is not open the phone to save the machine.
The first original Brush normal recovery methods:
1. Computer port driver installed first
. Phone off Remove the battery
3. Original line brush ROM package
4. SP_mdk software
SmartPhone Multi-port Download Tool brush back to the factory settings, the benefits of this software allows you to select the drive automatically.
Steps: the computer after the driver has been installed, so that you can brush machine, remove the first cell phone battery, to open sp_mdt software Brush with 9770-20120810_e1809c_v77_gq1008_5647 original package
. Press the Scatter File],
2. Select the original package boot file MT6577_Android_scatter_emmc.txt
3. [Select screen and camera,
4. Press [Unlock], select the drive (see below)
I have the 0810 version of the driver, rear lens: ov5647 front lens: hi704_yuv screen drive: RX_50NT_415B
5. SelAll tick
6. Figure for the right
7. (Check again)
8. Do not connect your phone, press Start all
9. (You can see the start countdown)
10. Phone off remove the battery to access the data line, after the software to find the port brush package, wait for brush package completed
Congratulations! ! . Picture below represents brush package completed, Stop all, remove the data lines, re-open the phone to see!
(Take a look around the money head is normal, there is no splash screen, the Friends of the 0810 version of the machine in general, it should be no problem, as the problem , on behalf of your phone may be an earlier version of the hardware, try to re-brush package, choose other drive, or not, may 9p017 number of tail version, it is possible the driver: mt9p017_raw [This is a hardware-based n8000], the 0810 version of the package is not there, you can download other versions of rom package to brush look at, think about yourself when to buy)
PS: last mention a successful brush package, open play original rom folder, you see the found
uboot_e1809c_v77_gq1008_5647.bin the file has been modified,
This is based on you select the other drive as the boot file to save, if you again to brush this packet to use another SP_flash_tool software, you will find not selected drive situation state there is no splash screen, can explain why a lot of friends with appears after the splash screen is like SP_flash_tool software brush machine.
The second is not open the phone to save machine
usually this situation is chaotic brush rom, or the driver is not installed, such as a break caused mostly. To brush back conditions is also found that the hardware of the computer connected to dismantle electric phone, or is no reaction, the gods can not put out.
1. Computer port driver installed first
. Phone off Remove the battery
3. Original line brush ROM package
4. Use mobile the uncle SP_Flash_Tool_v3.1222.00 software
steps:
1. The First Open mobile uncle SP_Flash_Tool_v3.1222.00,
. Select the Scatter-Loading
3. Select the boot file
4. All of the following documents full tick
5. To prepare phone removed the battery, first not access the data line, press the Download
6. Below to start searching, then access the data line
7. The software automatically Brush bag, waiting to complete
8. Green circle is completed there will be representatives completed! Open the phone and see! !
SmartPhone Multi-port Download Tool fact, this approach should also be able to use the first method to deal with, just download the version format / download can be used, like this software uncle solve, if after brushing phone has been able to open but appear splash screen or lens malfunction, then the first method to select the drive to paint again. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part III wire brush root method first talk n9770 root machine before, a key the root tool completely different root tools are the root file is sent to the phone directory specified, so no hard drive
and any file, replace. But now due to technical problems, the only line brush resolved, therefore must place the crack boot.img (contains the root file) straight brush into the phone, while the root file boot.img, it seems that, The 0710 version, after joining the root file repackaged, as far as I know, n9770, from 0705 to 0713, the rom package version number of the tail are 9p017, 0725 and the end of 0810 the number is 5647, has said 9p017 version is based on n8000 hardware for the upgrade, so the hardware is old driver, 9p017 version of the package is not as if 5647 the new version of the driver, and the 5647 version of the package without 9p017 old driver, a lot of people, chaos is chaos here, so 0725 and later versions of root brush replaced the earlier version of the brush into the cause splash screen, camera failure, the most simple way is to root and then their own original boot.img version from the new brush into time substitutes a while to not remove the root file, so normal, the truth is safe. As long as the know is of 9p017 still 5647 version, so you should know to download that rom use that drive to brush package, the problem will be reduced. ps: the principle problem, so when you use the wire brush root , restore the original file and driver version is more important, please find their own versions, such as uncertainty, think about when to buy and download the same period original package, make sure can find the you need, no splash screen, such as the failure problem root forum have all versions of the package, the can down try, otherwise such a key root tool only root machine it! Even if not the root problem , just brush original package to restore and driving problem has led to a lot of people headaches headache is because you have the wrong version of the original package, due to driver problems, as long as you drive your original package should be no problem, do not see the new version of chaos brush.
Know the version
20120705_e1809c_v77_gq1008_ 9p017
20,120,713 e1809c-v77-gq1008- 9p017
20120725_e1809c_v77_gq1008_ 5647
20120810_e1809c_v77_gq1008_ 5647
9p017 version available with the following drivers
The 5647 version of the following drive
Following the 0810 version of the brush method
PS: I brush root before SmartPhone Multi-port Download Tool, election 0810 version of the driver, restore factory version, when the IMEI is normal PS: Note, in each brush when the package is completed, the software has been completed, do not rush to remove the data cable, before the removal of the first to hear the USB disconnection sound after, and then stop the software, turn off the software only remove the USB, which is a good habit!
1. Ready to the Oral wind N9770 boot file
2. Open mobile uncle SP_Flash_Tool_v3.1222.00 is
3. Phone off Remove the battery is the first step decompression the Oral wind N9770 boot.rar There is a boot.img (creation date 2012-07-10, means BOOT crack under the 0710 or previous version), if not The boot file uboot_e1809c_v77_gq1008_5647.txt direct COPY of the original on the Oral wind N9770 boot folder inside. The second step mobile uncle SP_Flash_Tool_v3.1222.00 opens Scatter Loading, select Oral wind N9770 boot folder inside the boot file
Opens, you will see a boot.img tick, and then press Download
At this time, if the aphorisms prompted, press ok it
Saw searching, it will tear down the cell phone battery to insert the data cable, brush package began
Wait for the the DOWLOAD OK green circle out on completion of the
Replace the battery after open the phone to run it once (must first boot time), the
splash screen now. . . . Let it
then take a look there the superuser and uncle Tools, after brushing should have been there, turn off the phone, removed the battery! Continue with the next
step
mobile uncle SP_Flash_Tool_v3.1222.00 for the painted original BOOT.img
above, Scatter Loading, open the original ROM file folder, and select the boot files,
after only tick the boot.IMG other cancellation Figure
After Dowload, after waiting for seaching appear, insert the data line (phone off demolition electrical state), automatic brush boot until the green circle appeared complete. Re-open the phone to see if all normal, no splash screen, front and rear lens normally has installed superuser and mobile uncle Toolbox, phone, open the Toolbox, look to have root! IMEI is all normal, this is the first root.
After this, I try to brush the original package once, in the second accident, I do not know the reason for the port are disconnected, things did not brush into the dead! ! Can not phone, the heavy brush does not work, is the brush does not go in, but fortunately, the computer can also find equipment last. . . . . . . . Hee hee hee! Course to life, but the phone re-opened imei will invalid, relevant, how to deal with the back say.
Part IV uncle tools restore IMEI first description with Uncle tools to restore the IMEI, I have a backup the IMEI to recover If you do not have a backup file, many online teaching methods to restore the IMEI, the premise has ROOT. I only own briefing. PS: I ROOT for the first time after the success of IMEI did not fall on the first time backed up with Uncle tools, I lost IMEI is in the second condition only IMEI valid, invalid does not mean or call .
My approach is to first update uncle Tools Forum has released version of the the "mobile uncle Toolbox V2.2.0-0813" to support the 6577 phone, pictures
Recovery must have ROOT
enter the IMEI backup and recovery (MTK) you will see the file in the backup file md5 SD card with the above machine md5 is different, select the last restore the IMEI sd2 card, select Restart
To finalize
The fifth one this special treatment practices
sometimes appear, are usually driven not installed package brush out of the question, brush the wrong package, Brush usb break, are likely to cause the phone can not open this heavy brush when you then what software or update usb drive non-stop, in the end will find what brush does not go in, is the brush for a while, in the second situation, the port is stopped, then I sure the phone system, so the phone is turned on can not be able to find the port, usb connection, but re-brush is the brush does not go in there a port error problem, when I Another approach is to use the "mobile uncle SP_Flash_Tool_v3 .1222.00 ", the first re-Format phone, then you can use the top of the first and second method used DOWNLOAD reinstall the system, but after IMEI invalid and somehow save the phone in the state of radio , the computer can be found in hardware, mobile phones are not bricks and mortar, the Format is the ultimate method. This method when I n8000 has repeatedly trial, the most important thing is to brush some unknown rom or different mobile phone models package. The final solution, the best Freeze brush did not grasp the package, risk, or some non-essential not to use this method. Out of the situation, as shown in
The ultimate format **
This action will be completed after direct use Dowload,
like a brush to re-package in accordance with Method 2, so alive. PS: If you connect the phone did not find the hardware, I approach, repair it, I N8000 is dead brick waiting to be serviced. Mention one, n9770 though it is a phone model, but is in fact a mobile phone, n9770-9p017 n9770-5647, the use of such understanding on the best 9p017 latest version should be 2012-07-13 right 5647 latest should be 2012-08-10. Maybe there is a method you can let 9p017-0713 version into 9p017-0810 version, the 0810 version is to heavy brush, very possible will splash screen, after re-root machine, again after the SmartPhone the Multi-port Download Tool software single brush 0713 version rom within 3 files, first create a new folder to copy the past, the first one is the boot file: MT6577_Android_scatter_emmc.TXT second is the the boot.img third is uboot_e1809c_v77_gq1008_9p017.BIN (This file is not a driver can not choose) Although such can select the the 9p017 drive but actually what will happen I do not know, to see if there is no one to try it, but if as a brick . . . . . . . Please do not come to me in trouble! ! ! ! Honest, personal feel no need to feel not much different, and does not replace the 0810 version is the same as not able to play the game, not because of the update of the 0810, the phone will fly, so to think of it! Hardware anyway, can not replace. . . . Above content can help a friend to learn more about the situation, select the desired means wish brush package successfully! ! ! Winners please share Replies to talk about my own cell phone, with what version of the package, choose what drive, so multi-benefit of latecomers! Thank you, thank! !
Reviews
Rui Qi is not simple to the very time a teaching text ~ Moderator Big Brother and quick Medal! ~ Posted at 2012-9-10 02:09
◆ ◆
Here is a quick reply, and quickly try Oh
I know
post_newreply
3 people have rated Flights Less reason
cjsoong + 10 Is a force!
knight1082 + 10 Is a force!
Rui Qi + 10 Too detailed to estimated 2-3 hours to the birth of this article to
Total score: Flights + 30 View all ratings
2012-10-28 20:04 set highlighted this topic by sonpost
Share:
QQ space
Tencent microblogging
Tencent friends
Favorite
top
step one foot 0
ratings
[Welcome to] to 〖mobile uncle - Oral wind N9770 District〗
Reviews Reply Report
---------- Post added at 09:11 PM ---------- Previous post was at 08:41 PM ----------
This is the link! http://products.mobileuncle.com/thread-199693-1-1.html:laugh:
Click to expand...
Click to collapse
I was wrong, this is for the N9770 not the N9970 sorry!!!!! Do not try this for your N9970, WILL BRICK IT FOR SURE!!!!:silly:
OK!!!
Hi this may help someone that has an ime prob with any mtk65xx phone.http://forum.gsmhosting.com/vbb/f723/mtk-6577-cant-repair-imei-1543530/hope this help!
Hey!!!
bobo31 said:
Hi this may help someone that has an ime prob with any mtk65xx phone.http://forum.gsmhosting.com/vbb/f723/mtk-6577-cant-repair-imei-1543530/hope this help!
Click to expand...
Click to collapse
Yall have to get this if you know what you are doing!!! http://code.google.com/p/custom-rom-creator-studio/
Hello everyone,
I have bought various Android TV boxes in the past, and haven't had problems getting them up and running.
I recently ordered 2 chinese models from eBay however, which are giving me nothing but grief. I apologize in advance for such a loooong post, but I am at my wits end and I am really hoping someone can help me out.
The action was for this model here:
www.ebay.com.au/itm/231275032090
It appeared to be a pretty standard model, like a Justop 4.0, but with a hard switch where the optical should be, and a cut down remote.
Firstly, the Specifications according to the auction:
1GB ddr3
4GB nand flash
Allwinner A20 dual core 1GHz CPU
On closer inspection after receiving the unit, an additional physical difference is that the reset button appears to be between the USB ports, instead of behind the AV out - not a big deal.
After powering it up, I am having huge problems with them.
Firstly though, what the software says about the hardware:
Advanced Settings/About Tablet:
Model Number : BBA22
Android Version : 4.2.2
Firmware Version : V2.0
Kernel Version : 3.4.39 [email protected] #10 Wed May 14 22:36:36 CST 2014
Build Number : BBA22-UI4-V2.0.1
And what Droid Info says about the (relevant)hardware:
Model : BBA22 (sdk-normal)
Manufacturer : unknown
Chipset : sun7i
RIL version : sw-dataonly-ril-0.5
Build Number : BBA22-UI4-V2.0.1
Build Bingerprint : softwinners/ninss/ninss4.2.2/NinssSoftware/20140521:eng/test-keys
OS Version : Jelly Bean MR1 (4.2.2)
SDK : 17
CPU Architecture : ARMv7 Processor rev 4 (v71)
Now, the BIGGEST issue these things have, is that at random points of use, it comes up with a message "Warning - System configuration is inconsistent with the production configuration, please contact your supplier, thank you!". This message will flash over and over again for anything from 30 seconds to half an hour. I half suspect it has tablet code SOMEwhere in it also, as it keeps coming up with 'touch the circle' walkthroughs for applications like avia. This might be unrelated though, I have no idea.
So anyway, I have tried doing the Justop 4.0 flash method with a SD card, however it will not turn on if there is a card in the slot. Also, when you hold the reset button down and power it up, it does not seem to go into the diagnostic mode so I can't flash it that way either. I am guessing the ONLY way I can update short of soldering in a serial port, is to use the backup/restore function.
I read through this whole thread here, but cound not fine anything to help me:
http://forum.xda-developers.com/showthread.php?t=2398632
If anyone has any ideas, please let me know, I seriously can't get anything to work. I thought maybe the 'hotspot' being enabled was causing the incinsistency problem, but I used a process killer to stop that at startup, still no luck. Doing a system reset through advanced config didn't help either, I got the error almost as soon as turning the unit back on.
I've attached pictures of the error I am getting, the top of the board, and the back if the board.
Cheers,
Smak
PS - I am yet to hear back from the seller, but if I ever do, I will post the result here...
Smakky said:
Advanced Settings/About Tablet:
Model Number : BBA22
Android Version : 4.2.2
Firmware Version : V2.0
Kernel Version : 3.4.39 [email protected] #10 Wed May 14 22:36:36 CST 2014
Build Number : BBA22-UI4-V2.0.1
Click to expand...
Click to collapse
I seem to be in a very similar situation. My device also reports as being "BBA22" but it's a different form factor and the identification on the board is "TXCZ_A20_v1.0". I tried contacting the people that made the board (Shenzhen Tianxing Chuangzhan Electronic Co.) but they refused to help. I also tried contacting the company that made the firmware images (Shenzhen NINSS Technology Ltd.) and they also refused. The supplier I bought the device from says they have the image file but they can't seem to figure out how to get it to me (they tried emailing the +200mb file then they gave up and stopped responding). The build number on my device is "BBA22-UI4-V2.0.4" so apparently there's an update available that may work on your device.
I'm pretty sure you need to flash the image using the Phoenixsuit program to make a special sdcard that you place in the device and boot from to reflash the device.
Please post your image file if you ever get it!
tisdall said:
I seem to be in a very similar situation. My device also reports as being "BBA22" but it's a different form factor and the identification on the board is "TXCZ_A20_v1.0". I tried contacting the people that made the board (Shenzhen Tianxing Chuangzhan Electronic Co.) but they refused to help. I also tried contacting the company that made the firmware images (Shenzhen NINSS Technology Ltd.) and they also refused. The supplier I bought the device from says they have the image file but they can't seem to figure out how to get it to me (they tried emailing the +200mb file then they gave up and stopped responding). The build number on my device is "BBA22-UI4-V2.0.4" so apparently there's an update available that may work on your device.
I'm pretty sure you need to flash the image using the Phoenixsuit program to make a special sdcard that you place in the device and boot from to reflash the device.
Please post your image file if you ever get it!
Click to expand...
Click to collapse
That is good to know, I might email them again now. Will let you know the outcome!
OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.
Smakky said:
OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.
Click to expand...
Click to collapse
That seems very promising for you! Unfortunately it probably won't help me at all... It sounds like it's a sort of update patch instead of a whole image. Starting the device with the reset button causes it to load the recovery partition instead of the regular partition (I'm guessing you saw a green android with a text menu with options for recovery). I full flashing would/could involve an SDcard, but I think you would have to create it with Phoenixsuit and not just copy the file contents over (it would then just boot directly from the SDcard and you wouldn't need to press the reset button).
In my case, both the regular boot partition and the recover partition are wrecked so I couldn't even try this patch if I wanted to.
Thanks for posting, though... Hopefully it helps someone else out.
tisdall said:
That seems very promising for you! Unfortunately it probably won't help me at all... It sounds like it's a sort of update patch instead of a whole image. Starting the device with the reset button causes it to load the recovery partition instead of the regular partition (I'm guessing you saw a green android with a text menu with options for recovery). I full flashing would/could involve an SDcard, but I think you would have to create it with Phoenixsuit and not just copy the file contents over (it would then just boot directly from the SDcard and you wouldn't need to press the reset button).
In my case, both the regular boot partition and the recover partition are wrecked so I couldn't even try this patch if I wanted to.
Thanks for posting, though... Hopefully it helps someone else out.
Click to expand...
Click to collapse
Hmm, is clockworkmod still a thing? I could try taking a backup of my ROM and see if that's something you can use.., only problem is I will need a bit of time. If I get a chance, I'll do it over the weekend. I will need a place to dump the image though, it will be too big to attach here, can sort that out later though.
Smakky said:
Hmm, is clockworkmod still a thing? I could try taking a backup of my ROM and see if that's something you can use.., only problem is I will need a bit of time. If I get a chance, I'll do it over the weekend. I will need a place to dump the image though, it will be too big to attach here, can sort that out later though.
Click to expand...
Click to collapse
I'd appreciate that... Your board seems to have a completely different layout, but all the same components. I'm not familiar with clockworkmod, though, so I'm not sure how that backup would work. I guess I'd need to get clockworkmod flashed on to the recovery partition first and then I could flash the backup to the NAND from there?
tisdall said:
I'd appreciate that... Your board seems to have a completely different layout, but all the same components. I'm not familiar with clockworkmod, though, so I'm not sure how that backup would work. I guess I'd need to get clockworkmod flashed on to the recovery partition first and then I could flash the backup to the NAND from there?
Click to expand...
Click to collapse
I'm not actually too sure. The last timed I used clockworkmod was for flashing a galaxy s2 phone, so I'm not even too sure if its still around or compatible with tv boxes. There will definately be SOME sort of tool though, that can take a full backup suitable for restoring. I'm about at the limit of my knowledge, so I am sort of playing by ear and going into a google-learn-try sort of cycle as I try different things. Maybe someone with more experience will stumble in here and let us know what we need to do
This is interesting... I found another device with an identical PCB board: YBKJ_A20 (I can't post links yet, but a Google search will find it) Several chips are different so the firmware would differ. It's so hard to work with these devices when no one claims credit for making a lot of these things!
What is J4?
http://dl-1.va.us.xda-developers.com/2/9/3/6/8/3/3/DSC_0207s.jpg
I was wondering what the upper left 2 pin connector is for? (the little white 2 pin plug next to the USB)
Is it SPDIF? Power input? output? Something else? I see in this picture a cable connected so i'm hoping you can tell.
Ask BBA22-V.1.50 TV BOX Model Android 4.2 Firmware
Smakky said:
OK, so I got a reply from the seller.
I've attached the patch file and the instructions to this message, but theres a few things to note.
- Its only like 20 meg big, so it isnt a full firmware update
- The instructions talk about pressing the reset button at the start.., I don;t think this is neccesary if its rooted already
- The instructions are VERY engrish-y, basically just dump the update.zip onto a sd card, and apply the patch through the settings menu
- The default language is changed to some form of Chinese after applying, theres plenty pictorials on how to change the android language though.
- The version has been updated from BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3 - This is still lower than the one you mentioned @ BBA22-UI4-V2.0.4
So far though, I have re-installed all my apps, and haven't seen the error.. yet. I was a little concerned it is still giving me touchpad tutorials, but mouse mode on the remote is making short work of those.
I'll just have to wait and see, I guess.
Click to expand...
Click to collapse
Hello
Thank You For This Firmware But It Work For BBA22-UI4-V2.0.1, to BBA22-UI4-V2.0.3.
My Device Model is ((BBA22-V.1.50)) with Android 4.2 and I had to update it with your firmware file to fix problem black page after boot.
after update my device with your firmware, black page broblem is solved but device not work properly and it show Error message for (android.process.acore) systematically in loop!
also I can not make very actions because this error message show repeatedly.
also the default device language is china and i can not change language (error message show repeatedly)
have you original firmware for ((BBA22-V.1.50)) with Android 4.2 device???
thank you for help me...
H.SHAFAGHI said:
have you original firmware for ((BBA22-V.1.50)) with Android 4.2 device???
Click to expand...
Click to collapse
So... For everyone looking for a full firmware for this box, and stumbled upon this thread from google like I did: DESPAIR NO MORE.
I found a compatible firmware for this device (exacly as described and same board as the one OP has) It will work even if your box came preinstalled with another software version, but its the same hardware
Found it in another thread, posted by @daaviles30 Its not EXACLY the same as the one I had originally loaded but appears to work without any issue whatsoever (even the remote works), if a little bit better.
So here it is:
daaviles30 said:
A20_V20_SDK_EN_XBMC_0703-2.img*491.4 MB
*https:/ /mega.co.nz/#!XAIRiD5Q!aIb0tvvjvzUdaf11vIR7PAadeXPV8XizYJ9X2mAzpQI
RH46-update-a20.zip*582 KB
*https:/ /mega.co.nz/#!HZwTgQIT!LQGxb6R-lCIKe58RgIGROfufY-aq5PODSAq3-NPKOeo
PhoenixCard_V309
*http:/ /mega.co.nz/#F!HAIhBJyS!L_UQPNnYdPyHTD3ggnJ6OA
After flashing update and then go to the play store and download SuperSU update that and your ready to go.
---------- Post added at 03:57 PM ---------- Previous post was at 03:29 PM ----------
Titanium Backup Pro v6.1.5.3.apk*6.2 MB
*https:/ /mega.co.nz/#!vAAWRJga!vOFKlAq_25ssrG5kvwa3-oC-d0saL06YGBIWIyN2jss
You can delete all the unwanted system apps with this app.
Hope this helps Happy New Years.
Click to expand...
Click to collapse
The flashing process is exacly as described earlier in this thread. Use phoenix card to burn the img to an SD card, turn the device on with the card inserted in the slot and enjoy your restored android box.
It Working Only With Booting From Memory Card Slot...
amedeh123 said:
So... For everyone looking for a full firmware for this box, and stumbled upon this thread from google like I did: DESPAIR NO MORE.
I found a compatible firmware for this device (exacly as described and same board as the one OP has) It will work even if your box came preinstalled with another software version, but its the same hardware
Found it in another thread, posted by @daaviles30 Its not EXACLY the same as the one I had originally loaded but appears to work without any issue whatsoever (even the remote works), if a little bit better.
So here it is:
The flashing process is exacly as described earlier in this thread. Use phoenix card to burn the img to an SD card, turn the device on with the card inserted in the slot and enjoy your restored android box.
Click to expand...
Click to collapse
Hello My Friend And Thank You For Replay...
This Android is Working And is Very Good But i Can Not Install This To My Device. I Copy The IMG File To A External Memory Card (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. It Is Very Fast And Have No Errors.
Now...
HOW I CAN INSTALL THE IMG FILE TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD (FOR ALL TIMES)???
H.SHAFAGHI said:
Hello My Friend And Thank You For Replay...
This Android is Working And is Very Good But i Can Not Install This To My Device. I Copy The IMG File To A External Memory Card (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. It Is Very Fast And Have No Errors.
Now...
HOW I CAN INSTALL THE IMG FILE TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD (FOR ALL TIMES)???
Click to expand...
Click to collapse
Wow.
The Phoenixsuite makes an sdcard that flashes the internal memory. After it's finished flashing, you take the card out and it runs off of the internal NAND. That's it. It never runs the Android from the sdcard.
My device can boot from sd-card!!! I need to flash this to install your android!
tisdall said:
Wow.
The Phoenixsuite makes an sdcard that flashes the internal memory. After it's finished flashing, you take the card out and it runs off of the internal NAND. That's it. It never runs the Android from the sdcard.
Click to expand...
Click to collapse
Hello My Friend And Thank You For Replay...
1- My Device Can Boot From SD-CARD With A Bootable Memory Card! (Such As OpenSuse Linux)
2- I Use PhonixCard Application That You Send.
(PhoenixCard_V309
*http:/ /mega.co.nz/#F!HAIhBJyS!L_UQPNnYdPyHTD3ggnJ6OA
3- I Can Not Use PhonixSuit Application And I Don't Know How To Use PhonixSuit. When I Connect My Device To My Computer To Use PhonixSuit, My Computer Don't Find Any Hardware And Can Not Connect!
4- I Copy The IMG File To A SD-CARD (Using PhonixCard Application) and put the Memory Card To My Device And PowerOn My Device. My Device Automatically Boot From Memory Card And New Android is Appear. If Unplug The SD-CARD And Power On My Device, Old Android Is Appear!!! Master Android Software Is In My Device And I Need To Clear This From My Device And Install Your Android!
HOW I CAN INSTALL YOUR ANDROID TO MY DEVICE (INTERNAL MEMORY) AND BOOT MY DEVICE WITHOUT USING MEMORY CARD???
I need help!!!!
no any answer???