crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
Rom Link:Click here.
GAPPS: DOWNLOAD GAPPS
First time installing crDroid to your K20 Pro, or coming from another ROM:
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
You tell me
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
Credits : Abhishek Aggarwal, Utsav Balar.
Maintainer:Wajid Khan, gwolf2u
ROM OS Version: 9.0 Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked Bootloader & Official TWRP Recovery
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2019-10-07
Nice to see you finally made a thread here :laugh:
For the european users that are wondering: Yes, this rom runs just fine on our EEA vendor, no need for any vendor flashings.
Oh and FYI: I flashed rom, gapps AND Magisk in OrangeFox in one go on my first install (without booting into system first) and everything worked fine anyway :victory:
Great rom with a nice amount of optimizations - keep up the great job (and don't forget to add our NFC :angel :good:
Nimueh said:
Nice to see you finally made a thread here :laugh:
For the european users that are wondering: Yes, this rom runs just fine on our EEA vendor, no need for any vendor flashings.
Oh and FYI: I flashed rom, gapps AND Magisk in OrangeFox in one go on my first install (without booting into system first) and everything worked fine anyway :victory:
Great rom with a nice amount of optimizations - keep up the great job (and don't forget to add our NFC :angel :good:
Click to expand...
Click to collapse
thank you very much & yes finally i made a thread as you said me to do?
Finaaaaally
I was on crdroid on poco for more than 8 months
One of the best custom ROMs I have ever used
Also what is the required firmware in case of chinese k20 pro ?
great job .... but I have a problem when I use the fod the brightness remains at maximum and I can not lower it. the only solution is to turn off the screen. try to resolve as soon as possible.Thanks
shouk_1987 said:
what is the required firmware in case of chinese k20 pro ?
Click to expand...
Click to collapse
Yeah, that's a good question. The answer should go to OP as well.
Also, just to find out - when you take a picture with leanage / crdroid can you choose 12 mpix as output or is it only the default 48 mpix as the matrix gives?
Sent from my GT-I9506 using Tapatalk
ludophone said:
great job .... but I have a problem when I use the fod the brightness remains at maximum and I can not lower it. the only solution is to turn off the screen. try to resolve as soon as possible.Thanks
Click to expand...
Click to collapse
What is fod abbreviation ?
I see this word a lot and do not understand
shouk_1987 said:
What is fod abbreviation ?
I see this word a lot and do not understand
Click to expand...
Click to collapse
Fingerprint on Display
Crdroid Unofficial Pie Build
07/10/19
Download :- https://drive.google.com/file/d/1RXJfHNdBm9-UwWdFxm4NA68zrg9C59ol/view?usp=drivesdk
Changelog:-
*Added Nfc for china & global user.
*performance improvement.
wajidkh08 said:
Crdroid Unofficial Pie Build
07/10/19
Download :- https://drive.google.com/file/d/1RXJfHNdBm9-UwWdFxm4NA68zrg9C59ol/view?usp=drivesdk
Changelog:-
*Added Nfc for china & global user.
*performance improvement.
Click to expand...
Click to collapse
Downloaded:victory: will flash tonight
wajidkh08 said:
Crdroid Unofficial Pie Build
07/10/19
Download :- https://drive.google.com/file/d/1RXJfHNdBm9-UwWdFxm4NA68zrg9C59ol/view?usp=drivesdk
Changelog:-
*Added Nfc for china & global user.
*performance improvement.
Click to expand...
Click to collapse
After flash magisk..wifi not Turning ON
Need a quick fix..plz help..I really like this ROM.but can't use internet Now:crying:
Can't register my finger print on scanning screen
Bhabesh98 said:
After flash magisk..wifi not Turning ON
Need a quick fix..plz help..I really like this ROM.but can't use internet Now:crying:
Click to expand...
Click to collapse
No such issues here - todays build, dirty flashed over the last one and todays gapps + Magisk also flashed, all in 1 go. Wifi is turned on and working too, see screenshot :good:
No idea about the fingerprint since I don't use that. Please edit your post next time btw, instead of making 2 posts in a row
Nimueh said:
No such issues here - todays build, dirty flashed over the last one and todays gapps + Magisk also flashed, all in 1 go. Wifi is turned on and working too, see screenshot :good:
No idea about the fingerprint since I don't use that. Please edit your post next time btw, instead of making 2 posts in a row
Click to expand...
Click to collapse
Can u just try registering finger print and let me know here if it is same with you
Bhabesh98 said:
Can u just try registering finger print and let me know here if it is same with you
Click to expand...
Click to collapse
I just tried and added 1 without any issues :victory:
No idea what's wrong with yours then - did you clean or dirty flash? Mine was dirty over the old installed build.
Nimueh said:
I just tried and added 1 without any issues :victory:
No idea what's wrong with yours then - did you clean or dirty flash? Mine was dirty over the old installed build.
Click to expand...
Click to collapse
Clean flashed
Is that a substratum theme ? Name?
Bhabesh98 said:
Clean flashed
Is that a substratum theme ? Name?
Click to expand...
Click to collapse
OK, that's 1 thing I won't test, so don't even ask
Only thing I'd suggest is doing it again - wipe system, data, both caches and then flash rom, gapps, Magisk all in 1 go. That's how I did it the first time a few weeks ago and haven't had any issues yet.
Good luck :fingers-crossed:
And it's Valerie Substratum theme, yes
Bhabesh98 said:
Clean flashed
Is that a substratum theme ? Name?
Click to expand...
Click to collapse
please try to do a clean flash again and report me with log & tell me your flashing procedure too & what modules you flashed. it will be helpful for me to find issue and fix it asap.
wajidkh08 said:
please try to do a clean flash again and report me with log & tell me your flashing procedure too & what modules you flashed. it will be helpful for me to find issue and fix it asap.
Click to expand...
Click to collapse
I all flash again..then reply if again something Wrong I face
Nimueh said:
I just tried and added 1 without any issues :victory:
No idea what's wrong with yours then - did you clean or dirty flash? Mine was dirty over the old installed build.
Click to expand...
Click to collapse
thank you for the confirmation seems like he did something wrong.
Related
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list
Downloads:
ROM
Gapps (recommended: arm64 nano/pico)
Root: Custom Magisk for treble enabled builds
Recovery: OrangeFox Recovery
Firmware (Flash this before ROM in case you are coming from official miui Marshmallow based stock ROM)
Note:
After clean flash/first time flash, ensure to manually select preferred network type from Mobile Network(necessary for 4G & VoLTE)
24-mar-2018 onward builds are with treble support, need the new recovery to flash ROM
Join the testers group here
Flashing Instruction
Always Have a full functional Backup. Just in case!
First time installing crDroid to your Redmi Note 4, or coming from another ROM:
** Make sure you're running a proper working Recovery ( TWRP)
1) Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
You need to flash GApps every-time you flash the ROM.
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- warabhishek @abhishek987
- Vitaliy Tomin
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Follow us on crDroid G+ community
Thanks for all your support. If you like my work and continue to support, hit Thanks and donate.
( Paypal me or Scan this Paytm code)
XDA:DevDB Information
crdroid-o-mido, ROM for the Xiaomi Redmi Note 4
Contributors
Soubhik_sk83
Source Code: https://github.com/crdroid-devices/android_kernel_xiaomi_msm8953
ROM OS Version: 8.x Oreo
Version Information
Status: Stable
Stable Release Date: 2018-03-06
Beta Release Date: 2017-12-15
Created 2017-12-15
Last Updated 2018-11-12
Reserved
Wanna flash the latest build before anyone else? Join the telegram group for latest updates
https://t.me/joinchat/DLbaL1GqGpP1TcHepqBpDA
Skip Google account login?
Nice
Sent from my Redmi Note 4 using Tapatalk
So official maintainer is here!!
:good: Good to see you in action!!
Its a fap time!!!
sagarcool said:
And what's the skip login. Skip Google account login?
Click to expand...
Click to collapse
Yes. Skip it or you may end up with an encrypted device
Volte not working
Sent from my Redmi Note 4 using Tapatalk
Is based on los?
why it is asking for password on first boot ?? any fix ... please i want to try this rom..am bigg fan of crdroid
Does this have ota working?
Does it have Omniswitch?
Andiespunkz said:
why it is asking for password on first boot ?? any fix ... please i want to try this rom..am bigg fan of crdroid ?
Click to expand...
Click to collapse
Format data..
Very good ROM! Best 8.1 i've tried! Every thing works fine for me. Root with magisk, instal viperfx... UI is really good (I love the wite and blue style!) thank you very mutch!
Nice to see crdroid oreo. Lots of bugs as expected since this is a beta -
1. No settings for hardware button
2. Phone bootloops if you edit QS tiles.
3. Faced 1 network reset.
Excited to see this ROM being maintained as well as the Nougat build!
IndDoc said:
Nice to see crdroid oreo. Lots of bugs as expected since this is a beta -
1. No settings for hardware button
2. Phone bootloops if you edit QS tiles.
3. Faced 1 network reset.
Excited to see this ROM being maintained as well as the Nougat build!
Click to expand...
Click to collapse
No bootloop for me when edit QS... No network reset too...
help
jmouf said:
Very good ROM! Best 8.1 i've tried! Every thing works fine for me. Root with magisk, instal viperfx... UI is really good (I love the wite and blue style!) thank you very mutch!
Click to expand...
Click to collapse
bro did you face any password problem on bootup... any fix for that...i dont want to format everything ?
Does this rom lags when phone wakes up from many hours of inactivity and opens data or wifi ?
Andiespunkz said:
bro did you face any password problem on bootup... any fix for that...i dont want to format everything ?
Click to expand...
Click to collapse
bro please understand the things. u have encrypted ur phone, thats why it is asking password for every boot. the only fix is to completely format ur device. and to avoid encryption in future always make sure that u r not setting password at the setup wizard time.
make sure u transfered the necessary files to an external drive before going for complete format.
Guys send me some screenshots in telegram if you can.. i have reverted to N since traveling over the weekend! soubhik_sk83
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
GAPPS: DOWNLOAD GAPPS
First time installing crDroid to your Redmi 6 Pro, or coming from another ROM:
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, vendor & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
Videos Dont Play in Notch Area
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- Zeelog
- Abhishek Agarwal
- Rohith Jain [ Pro Testers]
- Abhishek Sagar [ Pro Testers]
- Vishnu [ Pro Testers]
- Faarish [ Pro Tester, Fix Incall Volume ]
- DR!F73R [ Testers ]
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE ME
crDroid G+ community
XDA:DevDB Information
crDroid Official, ROM for the Xiaomi Redmi 6 Pro
Contributors
RevanthTolety,rama982
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.18.x
Based On: crDroid
Version Information
Status: Stable
Stable Release Date: 2019-01-28
Created 2019-01-28
Last Updated 2019-10-10
Kernel Source - https://github.com/Revanth/kernel_xiaomi_msm8953
Screenshots
Reserved
Thank you very much for your dedication hard work and time you have invested in it, It's a great start hope to see more on the way...??
I'm so happy, thanke
thanks for the ROM
NaYaB786 said:
Thank you very much for your dedication hard work and time you have investigated in it, It's a great start hope to see more on the way...?
Click to expand...
Click to collapse
Yeah Many More on the way to come
smfazel said:
I'm so happy, thanke
Click to expand...
Click to collapse
kunal.solanki.965 said:
thanks for the ROM
Click to expand...
Click to collapse
Enjoy Guys.
Thanks alot will try it soon..
There is a bug, when I enable or disable battery saver ,the screen goes black and restores after some seconds
Network traffic monitor don't work.
Thank you so much...... Was waiting for this from long time.
The rom too good..
Network monitor is only shown if we pull-down the notification panel
I didnt faced any issue with battery saver
Volte working fine..
Camera api enabled default so we can install gcam apk without hassle..
Magisk working fine..
Google pay works for indian users after magisk hide..
Just need little work on curverd area as the time and battery is little cutted out.. = fixed with statusbar extra padding to 7-8dp
Notifications problem while downloading from play store its showing when downloading gets finished (minorbug maybe)
Thank you for the rom Lets hope for the best if i get any major bugs i will edit this comment.
And i can recommend everyone to flash those who need for custom rom..
ShawnMercer said:
The rom too good..
Network monitor is only shown if we pull-down the notification panel
I didnt faced any issue with battery saver
Volte working fine..
Camera api enabled default so we can install gcam apk without hassle..
Magisk working fine..
Google pay works for indian users after magisk hide..
Juut need little work on curverd area as the time and battery is little cutted out..
Thank you for the rom Lets hope for the best if i get any major bugs i will edit this comment.
And i can recommend everyone to flash those who need for custom rom..
Click to expand...
Click to collapse
Thanks for the information...??
ShawnMercer said:
The rom too good..
Network monitor is only shown if we pull-down the notification panel
I didnt faced any issue with battery saver
Volte working fine..
Camera api enabled default so we can install gcam apk without hassle..
Magisk working fine..
Google pay works for indian users after magisk hide..
Juut need little work on curverd area as the time and battery is little cutted out..
Thank you for the rom Lets hope for the best if i get any major bugs i will edit this comment.
And i can recommend everyone to flash those who need for custom rom..
Click to expand...
Click to collapse
the curved area can be fixed easily, go to settings>crdroid settings>user interface>rounded corners>increase the statusbar extra padding to 7-8dp and fixed :good:
NaYaB786 said:
Thanks for the information...?
Click to expand...
Click to collapse
Welcome
loseyourself said:
the curved area can be fixed easily, go to settings>crdroid settings>user interface>rounded corners>increase the statusbar extra padding to 7-8dp and fixed :good:
Click to expand...
Click to collapse
thanks hehe
Best rom among all gsi's and rom i have tested mostly
Hands-off to the developer for building this incredible rom
ShawnMercer said:
Thanks alot will try it soon..
Click to expand...
Click to collapse
IMRAND said:
Thank you so much...... Was waiting for this from long time.
Click to expand...
Click to collapse
Enjoy
koyinkyaw said:
Network traffic monitor don't work.
Click to expand...
Click to collapse
I will have a Look in to it
Manav92 said:
There is a bug, when I enable or disable battery saver ,the screen goes black and restores after some seconds
Click to expand...
Click to collapse
If you could post Logs, would be more better
ShawnMercer said:
The rom too good..
Network monitor is only shown if we pull-down the notification panel
I didnt faced any issue with battery saver
Volte working fine..
Camera api enabled default so we can install gcam apk without hassle..
Magisk working fine..
Google pay works for indian users after magisk hide..
Just need little work on curverd area as the time and battery is little cutted out.. = fixed with statusbar extra padding to 7-8dp
Notifications problem while downloading from play store its showing when downloading gets finished (minorbug maybe)
Thank you for the rom Lets hope for the best if i get any major bugs i will edit this comment.
And i can recommend everyone to flash those who need for custom rom..
Click to expand...
Click to collapse
Thanks for this good Review. You could Actually change Padding In the below way.
loseyourself said:
the curved area can be fixed easily, go to settings>crdroid settings>user interface>rounded corners>increase the statusbar extra padding to 7-8dp and fixed :good:
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Redmi K20/Mi 9T [davinci]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 9.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
NFC
Fingerprint reader
Lights
Sound / vibration
Facelock
Known issues
You tell me/SIZE]
DON'T FLASH GAPPS, ALREADY INCLUDED
Download Pie version from Google Drive
Download Pie Plus version from Google Drive
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 9.0.0_r46
Security patch level: September 2019
Build author/Device Maintainer: DhK.-
Device Source code:
-Device tree:
https://github.com/DhKDc/android_device_xiaomi_davinci/tree/piepe
https://github.com/davinci-dev/android_device_xiaomi_sm6150-common
-Kernel:
https://github.com/davinci-dev/android_kernel_xiaomi_davinci
-Vendor:
https://github.com/davinci-dev/vendor_xiaomi
Source code: [url]https://github.com/PixelExperience[/url]
ROM Developer: jhenrique09
Changelog:
Pie version:
20190923
-updated to lastest davinci-dev fixes
Pie Plus version:
20190923
-updated to latest davinci-dev fixes
20190920:
-Initial Pie Plus release.
-NFC fixed
-all the fixes from davinci-dev team (Including HDR video)
Excellent work ?
Will you support builds in future?
Does the front camera works in this ROM?
Is this better than the previous where ? Ty for the work
Thanks for the work
Boots perfectly, I found an issue
• OTG doesn't work
And a small feature I can't live without
• Color calibration
BTW, will you build plus version?
----------
----------
sergaypoke said:
Is this better than the previous where ? Ty for the work
Click to expand...
Click to collapse
The other version is just a port, this one is specific for the 9T / K20.
Just say that the pop up camera has been fixed and the battery life has come close to what the stock offers .
Schnedi said:
Thanks for the work
Boots perfectly, I found an issue
• OTG doesn't work
And a small feature I can't live without
• Color calibration
BTW, will you build plus version?
----------
----------
The other version is just a port, this one is specific for the 9T / K20.
Click to expand...
Click to collapse
Fck yeah let's go , do I need to flash miui before or just full wipe or partial wipe and flash ?
pranjalm said:
Excellent work ?
Will you support builds in future?
Click to expand...
Click to collapse
I hope to become the maintainer for the ROM. Let's wait for 2 weeks.
Barbiox Dogg said:
Does the front camera works in this ROM?
Click to expand...
Click to collapse
Yes, it does.
Schnedi said:
Thanks for the work
Boots perfectly, I found an issue
• OTG doesn't work
And a small feature I can't live without
• Color calibration
BTW, will you build plus version?
----------
----------
The other version is just a port, this one is specific for the 9T / K20.
Click to expand...
Click to collapse
Thx for the report about OTG, gonna check.
Sadly, PE does not include any features other than the Pixel ones, so I can't add Color calibration to this ROM if I hope to make this official.
I'm building plus version right now.
sergaypoke said:
Fck yeah let's go , do I need to flash miui before or just full wipe or partial wipe and flash ?
Click to expand...
Click to collapse
If you are using another AOSP rom, wipe system, data, dalvik and caché and flash PE. It worked for me.
dhk.- said:
Thx for the report about OTG, gonna check.
Sadly, PE does not include any features other than the Pixel ones, so I can't add Color calibration to this ROM if I hope to make this official.
I'm building plus version right now.
Click to expand...
Click to collapse
I understand. Great news
Thanks again!
Schnedi said:
If you are using another AOSP rom, wipe system, data, dalvik and caché and flash PE. It worked for me.
I understand. Great news
Thanks again!
Click to expand...
Click to collapse
What about if you are coming from miui?
Benfatica said:
What about if you are coming from miui?
Click to expand...
Click to collapse
I will write the steps I do, maybe some of them are not needed, but never had a bootloop/brick, so, I always follow them
• Backup (OTG)
• Format data
• Factory reset
• Reboot TWRP
• Flash the rom
• Reboot TWRP
• [Optional] Flash GApps (not needed in this rom), flash Magisk and flash dm verity/forceencrypt disabler (I use my device decrypted)
• Reboot
Schnedi said:
I will write the steps I do, maybe some of them are not needed, but never had a bootloop/brick, so, I always follow them
• Backup (OTG)
• Format data
• Factory reset
• Reboot TWRP
• Flash the rom
• Reboot TWRP
• [Optional] Flash GApps (not needed in this rom), flash Magisk and flash dm verity/forceencrypt disabler (I use my device decrypted)
• Reboot
Click to expand...
Click to collapse
Well so if my twrp ask for code mine it's encrypt right ? Do I need permissive 4 ?
What kernel should I use venom it's ok ?or 4.14 hairuka ?
Sorry for so many questions I don't want to make a mess
sergaypoke said:
Well so if my twrp ask for code mine it's encrypt right ? Do I need permissive 4 ?
What kernel should I use venom it's ok ?or 4.14 hairuka ?
Sorry for so many questions I don't want to make a mess
Click to expand...
Click to collapse
Yes, it's encrypted. No, permissiver is to change your selinux state.
If you want to disable encryption, you need this: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389/
I always use the one that comes with the rom. Can't recomend any of them, sorry.
OTG works for me coming from xiaomi.eu 10.3.15 base but only when i boot into the system through TWRP.
Schnedi said:
Yes, it's encrypted. No, permissiver is to change your selinux state.
If you want to disable encryption, you need this: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389/
I always use the one that comes with the rom. Can't recomend any of them, sorry.
Click to expand...
Click to collapse
Ok , will try it latter when I got home , awesome work
dhk.- said:
I hope to become the maintainer for the ROM. Let's wait for 2 weeks.
Yes, it does.
Thx for the report about OTG, gonna check.
Sadly, PE does not include any features other than the Pixel ones, so I can't add Color calibration to this ROM if I hope to make this official.
I'm building plus version right now.
Click to expand...
Click to collapse
Hi bro.
I have not tested yet but I thank you already,
Schnedi said:
I will write the steps I do, maybe some of them are not needed, but never had a bootloop/brick, so, I always follow them
• Backup (OTG)
• Format data
• Factory reset
• Reboot TWRP
• Flash the rom
• Reboot TWRP
• [Optional] Flash GApps (not needed in this rom), flash Magisk and flash dm verity/forceencrypt disabler (I use my device decrypted)
• Reboot
Click to expand...
Click to collapse
Sorry for my stupid questions. But what twrp version are you using please?
Benfatica said:
Sorry for my stupid questions. But what twrp version are you using are you using please?
Click to expand...
Click to collapse
Greek version: https://www.mediafire.com/file/yuhi6pl5qtjr1nu/twrp_davinci_3.3.1_12-08-19_blue_Ss_new.img/file
Finn3gan said:
OTG works for me coming from xiaomi.eu 10.3.15 base but only when i boot into the system through TWRP.
Click to expand...
Click to collapse
Formatted data while coming from miui?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are very excited to announce the release of Paranoid Android Quartz, based on Android 10.
On the first launch, you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app, included in our builds.
Our builds are based on the Code Aurora Forum Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Device-specific issues
You tell me
Requirements
FW 11.0.2.0 + BB 11.0.3.4
https://mega.nz/file/W8gBRTJK#ZoDoH26FhT3B67KKpuJBZs4uRrrQheOEWp05SLAqtis
Download
Gapps
MOD EDIT: Link Removed
Vanilla
MOD EDIT: Link Removed
Changelogs
Features:
-Fully CAF based
-Fully compatibility with Audio Mod by @iamphoenix01
-ParanoidDoze (AOD, lift to wake, dt2w...)
-Edge lighting
-Face Unlock
-Volume Panel completely redesigned
-Data tile
-Multi-User support
-Microg support
-/data and /cache f2fs support
Instructions
We highly recommend to use Zerne SHRP Recovery from 1st March.
1. Flash FW + BB (Optional)
2. Flash Paranoid Android Grus
3. Flash Magisk (via add more zips) (Optional)
** Only required for the first flashing, and maybe optional.
Important / Useful links
Paranoid Android Twitter
MOD EDIT: Link Removed
MOD EDIT: Link Removed
Kernel Source
Cheers and #StayParanoid!
XDA:DevDB Information
ParanoidAndroid Grus, ROM for the Xiaomi Mi 9 SE
Contributors
gran_lexu, Pengus77, Zerne
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: Quartz 4
Stable Release Date: 2020-07-21
Created 2020-07-21
Last Updated 2020-07-21
Excellent news. Is this an official release? Which gapps uses? Since I prefer pico.
Any bugs?
Thanks again dude, this is great news for our Grus.
ramping said:
Excellent news. Is this an official release? Which gapps uses? Since I prefer pico.
Any bugs?
Thanks again dude, this is great news for our Grus.
Click to expand...
Click to collapse
Hey, not unofficial but doesn't matter since I will keep it up to date so do not worry
It tracks Pixel Experience repo gapps however with Quartz 3 update I will release a vanilla version
No bugs so far
Does this rom support ethernet connection? Official MIUI and Xiaomi.eu version doesn't support ethernet connection for this device
aresbv2000 said:
Does this rom support ethernet connection? Official MIUI and Xiaomi.eu version doesn't support ethernet connection for this device
Click to expand...
Click to collapse
It should as stock Android 10 does, however I didnt test it as I dont have an ethernet OTG.
But as said, it should support it.
please make a gapps-fre version or gapps pico
Paranoid and vanilla gapps contradict each other
R!ffRaff said:
please make a gapps-fre version or gapps pico
Paranoid and vanilla gapps contradict each other
Click to expand...
Click to collapse
It includes stock gapps PA team includes in github.
Vanilla version is coming next week.
gran_lexu said:
It includes stock gapps PA team includes in github.
Vanilla version is coming next week.
Click to expand...
Click to collapse
please make a gapps-free version.
Downloadlink down?
R!ffRaff said:
please make a gapps-free version.
Downloadlink down?
Click to expand...
Click to collapse
Yes, coming next week.
Fixed, up now
Hi, this is my first time flashing custom rom on my Mi 9 SE, though i had experience from my previous devices.
Just asking to be sure, i would need to have TWRP flashed first right? And is there any other necessary tools that i need to flash, like firmware or anything?
And what do you mean by having firmware 11.0.2.0?
EDIT: I understand on the firmware question, i will have to flash 11.0.2.0 firmware, got it. But what is the flashing order?
Hi all,
Thanks for the work!
Somehow due to my inexperience I managed to softbrick my device (stuck at fastboot, fixable by reflashing miui image). So I have a couple of questions:
1. I am going from firmware 11.0.2.0 Europe (QFBEUXM). Does this require to start from another version of the firmware (Global for example)
2. The kernel needs to be flashed separately? Or is it included in the flash package.
Thanks.
Lokcies said:
Hi, this is my first time flashing custom rom on my Mi 9 SE, though i had experience from my previous devices.
Just asking to be sure, i would need to have TWRP flashed first right? And is there any other necessary tools that i need to flash, like firmware or anything?
And what do you mean by having firmware 11.0.2.0?
EDIT: I understand on the firmware question, i will have to flash 11.0.2.0 firmware, got it. But what is the flashing order?
Click to expand...
Click to collapse
Yes, you need to have custom TWRP (SHRP reocommended) wipe dalvik/cache/data/vendor/system, flash 11.0.2 and then flash rom and magisk
sacortesh said:
Hi all,
Thanks for the work!
Somehow due to my inexperience I managed to softbrick my device (stuck at fastboot, fixable by reflashing miui image). So I have a couple of questions:
1. I am going from firmware 11.0.2.0 Europe (QFBEUXM). Does this require to start from another version of the firmware (Global for example)
2. The kernel needs to be flashed separately? Or is it included in the flash package.
Thanks.
Click to expand...
Click to collapse
No it doesnt matter. Just flash twrp.img from adb and then required wipes, flash 11.0.2 + rom + magisk
kernel is already included.
Do you have a link for the required firmware?
Peace
gran_lexu said:
Yes, you need to have custom TWRP (SHRP reocommended) wipe dalvik/cache/data/vendor/system, flash 11.0.2 and then flash rom and magisk
No it doesnt matter. Just flash twrp.img from adb and then required wipes, flash 11.0.2 + rom + magisk
kernel is already included.
Click to expand...
Click to collapse
Tried once more and didn't work (still stuck at fastboot). However, reading somewhere else I found out that when you come from a MIUI Rom (like stock) to AOSP you might need to flash also vbmeta. Tried that and it worked correctly.
So far no problems, great performance.
chris5s said:
Do you have a link for the required firmware?
Peace
Click to expand...
Click to collapse
https://t.me/wtfirmware
sacortesh said:
Tried once more and didn't work (still stuck at fastboot). However, reading somewhere else I found out that when you come from a MIUI Rom (like stock) to AOSP you might need to flash also vbmeta. Tried that and it worked correctly.
So far no problems, great performance.
Click to expand...
Click to collapse
Ahhh! Though you did all the previous steps, yeah you have to make a few things coming from MIUI obviously!
gran_lexu said:
https://t.me/wtfirmware
Click to expand...
Click to collapse
Thanks but I don't have telegram.
Peace.
chris5s said:
Thanks but I don't have telegram.
Peace.
Click to expand...
Click to collapse
There you go:
https://mega.nz/file/qIEiFKAQ#OEuqF8yGGhKGNSB9i9cnphbUgoF3Yh6QZOTJaCHcwkk
sacortesh said:
Tried once more and didn't work (still stuck at fastboot). However, reading somewhere else I found out that when you come from a MIUI Rom (like stock) to AOSP you might need to flash also vbmeta. Tried that and it worked correctly.
So far no problems, great performance.
Click to expand...
Click to collapse
Could you write down the order of flashing that you used.
Thanks.
Nice ROM, smooth. The only minor "fault" I find is that fingerprint recognition for unlocking the phone isn't great. I usually have to put in the PIN code to unlock. I had this issue on Pixel Experience too. But otherwise all's good.
Peace
---------- Post added at 11:46 AM ---------- Previous post was at 11:45 AM ----------
zbiba said:
Could you write down the order of flashing that you used.
Thanks.
Click to expand...
Click to collapse
This worked for me - factory reset, format data, reboot recovery, flash firmware then flash ROM (as per first post!)
Peace
zbiba said:
Could you write down the order of flashing that you used.
Thanks.
Click to expand...
Click to collapse
My flashing order when coming from stock MIUI 11.
1. Of course first unlock bootloader.
2. Flash TWRP from @redispade
3. Format Data from TWRP
4. Reboot to TWRP
5. Wipe dalvik/cache/data/vendor/system
6. Copy the ROM and firmware zip files to internal storage.
7. Flash the firmware zip
8. Flash the ROM zip
9. Reboot (it won't reboot to ROM, it will be stuck at flashboot)
10. Connect to the PC and from cmd flash vbmeta (fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img)
11. From cmd type the command "fastboot reboot" and finger's crossed, now you should see the boot screen.
As far as I remember this is what I did. I tried to recall it as much as I could however it was 4 in the morning.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OctaviOS is an AOSP based rom focusing on Unique and Smooth UI with handy features. OctaviOS is a reborn of pie based PearlOS.
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
CLEAN FLASH :
-Reboot to recovery
-Take Backup (Not Necessary)
-Flash your firmware(If required)
-Reboot To Recovery
-Wipe System, Vendor, Cache, Dalvik Cache and Data
-Flash the ROM
-Flash Gapps
-Flash magisk (optional)
-Reboot
DOWNLOAD
MOD EDIT: Link Removed
-Lineage OS
-AOSP
-Superior OS
-Pixel Experience
-Extended UI
-Havoc OS
-CrDroid ROM
-Fluid OS
-Others, I forgot to mention
Based on Android 11.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Face unlock
NFC
Lights
Sound / vibration
Known issues
Nothing yet
You tell me
OctaviOS Source
Telegram Group
REPORTING BUGS!
As soon as the problem occurs, take a logcat!
for more READ THIS
OctaviOS for Redmi Note 4
Device: mido
Maintainer: Satyam Sharma
Build Type: Official
ROM Kernel: Linux 4.9
ROM Firmware Required: Must be on Latest Firmware
Based On: AOSP
Android OS version: 11
Security patch level: October 2020
Build author: cornoal
ROM Developer: Sagar Rokade, Rahul Mishra, Satyam Sharma
Version Information
Status: Stable
Current Stable Version: 1.1
SELinux Status: Permissive
Release Date: 2020-10-15
Is the latest firmware from november 2019?
It's the newest I found here
Looks nice. Wich launcher is included with the ROM?
Thanks for development and support... Loved the new setting layout .. every available customization feature works other then long press for torch option. Lock screen wakes up as the said option doesn't seem to work. Nonetheless awesome build ...:good:
hi, i have several questions.
My xiaomi redi note4x (mido) has the default kernel, that is, the one that starts with 3.0. Do I need to update the kernel to install it, or does it install automatically with the installation of the custom rom?
Is this rom updated by ota?
Does this rom bring screen color clibration by default? The latter is so that my screen does not suffer an error that it already has and I solve it by adjusting the colors. Thanks for reading and I hope you reply soon
Yes it will flash 4.9 kernel
No ota as of now
An yes display calibration is present in Xiaomi parts
hiimimtayaz said:
Thanks for development and support... Loved the new setting layout .. every available customization feature works other then long press for torch option. Lock screen wakes up as the said option doesn't seem to work. Nonetheless awesome build ...:good:
Click to expand...
Click to collapse
Will look into it thanks!
cornoal said:
Yes it will flash 4.9 kernel
No ota as of now
An yes display calibration is present in Xiaomi parts
Click to expand...
Click to collapse
my english is something bad. Do you mean I need the kernel or will it install automatically?
In case I have to install it, how do I do it? Could you pass me the exact kernel link? thank you very much
PhoMax said:
my english is something bad. Do you mean I need the kernel or will it install automatically?
In case I have to install it, how do I do it? Could you pass me the exact kernel link? thank you very much
Click to expand...
Click to collapse
No need to for any extra kernel or zip
Just flash rom gapps and reboot, simple!
cornoal said:
No need to for any extra kernel or zip
Just flash rom gapps and reboot, simple!
Click to expand...
Click to collapse
OK, thank you very much for everything. is that with a lineageos rom with this same kernel it gave me an error when installing and I supposed the same thing would happen to me. thank you very much
PhoMax said:
OK, thank you very much for everything. is that with a lineageos rom with this same kernel it gave me an error when installing and I supposed the same thing would happen to me. thank you very much
Click to expand...
Click to collapse
Kindly read post everything is mentioned
And it's aosp based,
You won't face any issues while flashing or while using
Good luck
or one last question does it work with android 10 gaps?
PhoMax said:
or one last question does it work with android 10 gaps?
Click to expand...
Click to collapse
Use android 11 only, preferably flame gapps full edition
cornoal said:
Use android 11 only, preferably flame gapps full edition
Click to expand...
Click to collapse
Oki
from what I understand there are no official android 11 gapps so I will have to download the unofficial ones. thanks for everything again ^^
This ROM is awesome, could any one tell me how can I bypass safety net api, I am using microg
Bhanu_p_mishra said:
This ROM is awesome, could any one tell me how can I bypass safety net api, I am using microg
Click to expand...
Click to collapse
its already passing, suppose didnt for some x reasong use magisk hide done!
May i ask which magisk should i choose to hide root for banking apps, even better is how to unroot the rom?
Uh, one more, i can't do gesture navigation.
Nice work ?
Edit: i use latest magisk but after using magisk hide the banking app still detect my phone as rooted.
How to fix this cause i need the app, thank you.
good job dev...amazing rom ,stable and smooth, just wanna to report that full gesture not working...hope next build can resolved this issue and bring much more custumization
groovepeppy said:
May i ask which magisk should i choose to hide root for banking apps, even better is how to unroot the rom?
Uh, one more, i can't do gesture navigation.
Nice work
Edit: i use latest magisk but after using magisk hide the banking app still detect my phone as rooted.
How to fix this cause i need the app, thank you.
Click to expand...
Click to collapse
In addition to magisk hide, changing the magisk manager package name to something else worked for me
Nice work dev
But location isn't working for me ?