A7 2018 twrp flash - Samsung Galaxy A7 (2018) Questions & Answers

Hi
I have an A7 2018 all orignal now need to write a custom recovery twrp but see need
NOTE: ON ANDROID 5.1.1> DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
Click to expand...
Click to collapse
I cant access to phone have pin lock if use odin to flash twrp work fine same o give same problem on boot? need to go on twrp recovery mode to try enable adb usb debug

Related

[ROOT] Samsung Galaxy C7 SM-C7000

Do this at your own risk i will not be responsible for any damage. i am not a C7 user and i havent tried this...
Do a Backup or have a stock rom downloaded from sammobile site.
Your device must have atleat 60% of charge.
Goto Settings -> Security and enable the "Unknown sources".
For your safety, please take backup of your importent stuffs.
Turn on USB debugging mode from Developer Options on your Samsung Galaxy C7. To turn on USB debugging you have to enable Developer options, GoTo settings -> About and tap multiple times on build number.
turn on OEM unlock from developer options..
and here i repeat "on your own risk"..
Steps to install TWRP on Samsung Galaxy C7
1. Goto official TWRP page and download twrp-2.8.x.x-xxx.img file for your Samsung Galaxy C7. Keep twrp-2.8.x.x-xxx.img file in a separate folder.
2. Your PC must have ADB & fastboot installed and configured. For quick installation try 15 Second ADB installer. download
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
3/ Now connect your device to your PC and goto twrp folder and press and hold shift then rightclick on white space and "Open command window here".
3. Now type following commands at command prompt.
"adb reboot bootloader" - to boot your device into bootloader.
after booting into bootloader type "fastboot flash recovery twrp-2.8.x.x-xxx.img" - this will flash TWRP recovery on your Samsung Galaxy C7.
"fastboot reboot" - to reboot your device.
After reboot type "adb reboot recovery" - to boot into recovery mode.
Now:
1. Download Super SU by chainfire from the following link and put it in the root of your internal storage.
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
2. Boot into TWRP from your device and install/flash UPDATE-SuperSU-vX.XX.zip zip in your Samsung Galaxy C7.
May be u can use ODin to flash twrp..
Thank you but I don't find twrp for Samsung c7... and I think he don't exist. Any other idea ?
Lykeul said:
Thank you but I don't find twrp for Samsung c7... and I think he don't exist. Any other idea ?
Click to expand...
Click to collapse
no idea... devs are not looking at this phone i think.
Snif, I hope we do it... no method work, all one click or apk try don't work... wait and see
Any news?
Not for me, no news and no root
Ii followed this instructions to root my samsung C7 i installed both twrp and also other but i am not able to boot into twrp recovery with vol Up+power+home key its still the regular recovery mode how can i get the Twrp mode..? Plz answer
thank you
There is no TWRP for the SM-C7000 for offical use. Only in some paid chineses forums is a rooting method available.
https://forum.xda-developers.com/android/software-hacking/root-galaxy-c7-tested-stable-t3547186
ROOT GALAXY C7
BY ME
Thanks for your superb work.
javad0644 said:
https://forum.xda-developers.com/android/software-hacking/root-galaxy-c7-tested-stable-t3547186
ROOT GALAXY C7
BY ME
Click to expand...
Click to collapse
Only javed0644 method is working.. i have tried it on my samsung c7 hongkong veesion having june security patch C700ZHU2AQF2, without any problem and also installed xpose framework.
Galaxy C7 Developer & Tester Telegram Channel
https://t.me/GalaxyC7OT
TWRP for Galaxy C7: https://forum.xda-developers.com/android/development/recovery-official-twrp-galaxy-c7-t3684983
work in android 7.0?
immunology said:
work in android 7.0?
Click to expand...
Click to collapse
no don use it on android 7

twrp & Root & Mod for Ulefone Mix

Support page for ulefone Mix User-
we Need Some files to Root Ulefone Mix.
1. SP flash tools- https://spflashtool.com/
2. twrp Recovery- https://romprovider.com/2017/11/ulefone-support-twrp/
3. SuperSU- https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
other Support File-
Official Firmware- mod edit - link removed
no-verity-opt-encrypt-5.1.zip - https://androidfilehost.com/?fid=673368273298927206
Instructions-
First of all Flash twrp using SP flash tool
Don't Switch on phone flash no-verity-opt-encrypt-5.1.zip
then flash SuperSu.zip
Reboot System Now.
Is the 1st step not disabling oem lock in developer settings?
HypoTurtle said:
Is the 1st step not disabling oem lock in developer settings?
Click to expand...
Click to collapse
you can unlock with fastboot-
For new devices (2015 and later):
Code:
fastboot flashing unlock
For older devices (2014 and earlier):
Code:
fastboot oem unlock
XN Logos said:
you can unlock with fastboot-
For new devices (2015 and later):
For older devices (2014 and earlier):
Click to expand...
Click to collapse
For some reason no need to oem unlock (bootloader not locked properly??) so have twrp without needing to wipe data, but now remains the encryption problem as this trwp doesn't support it, I have compiled twrp for mtk in the past with encryption support but doubt I can recall what needed to be done
TWRP not working
When I install the TWRP recovery and start the phone with this mode to install the two files
1) no-verity-opt-encrypt-5.1
2) SuperSU-v2.82-201705271822
the phone does not see them and it is impossible to proceed further.
Furthermore, the operating system does not even start, so the original firmware must be replaced with the flash tool.
Has anyone found a solution to this inconvenience?
Thank you
mingariedd said:
When I install the TWRP recovery and start the phone with this mode to install the two files
1) no-verity-opt-encrypt-5.1
2) SuperSU-v2.82-201705271822
the phone does not see them and it is impossible to proceed further.
Furthermore, the operating system does not even start, so the original firmware must be replaced with the flash tool.
Has anyone found a solution to this inconvenience?
Thank you
Click to expand...
Click to collapse
1. Userdata is encrypted, and the TWRP here isn't compiled to be able to decrypt it. So you'll need an sdcard with those zips on it
2. The os won't start if it deems its been altered - that's partly what zip 1 is for.
Is there any custom roms for Ulefone Mix?
Qaaqqu said:
Is there any custom roms for Ulefone Mix?
Click to expand...
Click to collapse
No custom ROMs - I think there is a clone device [Panasonic Eluga C] so we have another stock ROM from them.
I haven't attempted porting anything yet, let alone building anything from source [a source built twrp should be trivial] - i've lost yet another hard-drive recently so light on diskspace & sdcards so not able to do much atm.
For completeness: stock ROM > http://ulefone.com/download/mix.html [newer than the one on needrom]
OTA > http://hwfotadown.mayitek.com/ota/r...NE_N_V0.6.9.1_S1712221514261911507/update.zip
Is this root method working?
Stock rom is located here Stock Ulefone Mix 4G Rom
when (android 8) Oreo for ulefone mix?
twrp and now?
Hello,
i have an old ulefone mix mt6750t with the screen damaged but still 90% working, i thought i would use it on android auto but i needed rooting.
So I informed myself a bit, go unlocked developer mode and usb, downloaded adb and twrp and magisk etc ...
I unlocked the bootloader from the settings then used adb and installed twrp which starts but asks me for the pass to decrypt, then I swipe and delete the encrypted data.
Then with adb sideload I install magisk 20 and check opt encript, but the phone always goes to twrp, it does not restart ... mmm and the orange mode message comes out but it should be normal ... someone knows how to go on to restart it normally and not with twrp?
Thank you

Question How to unlock bootloader of realme c2 RMX 1945

How I can unlock bootloader of realme c2 RMX 1945?
I enable unknown source installation for file manager.
I try to install DeepTesting_realme-release_signed.apk mentioned in this thread. But installation failed.
https://c.realme.com/in/post-details/1085078965883764736
after clicking on install it show message "App not installed"
n32 said:
How I can unlock bootloader of realme c2 RMX 1945?
I enable unknown source installation for file manager.
I try to install DeepTesting_realme-release_signed.apk mentioned in this thread. But installation failed.
after clicking on install it show message "App not installed"
Click to expand...
Click to collapse
Unlock APK is not required to unlock the bootloader of realme c2 RMX 1945.
Unlocking the bootloader will RESET the phone.
Instructions to unlock the bootloader of realme c2 RMX 1945:
On PC:
install usb drivers for your device (Realme C2).
install adb and fastboot ( SDK platform tools zip file).
On Realme C2:
Enable USB Debuging:
Settings -> About Phone -> Version ( tap 7 times)
Settings -> Additional Settings -> Developer options -> USB Debugging ( turn on)
Settings -> Additional Settings -> Developer options -> Oem unlock ( turn on)
Connect Realme C2 to PC using USB cable.
Select Transfer Files ( second option )
On PC open folder where adb.exe and fastboot.exe files are located.
Now type
Code:
cmd
in the address bar of File Explorer and hit Enter to open Command Prompt.
In Command Prompt type:
Code:
adb devices
On Realme C2 "Allow USB Debugging ? " message appears.
select ok.
On PC:
Code:
adb devices
Output should be:
Code:
List of devices attached <device serial number> device
On PC
Code:
adb reboot-bootloader
phone will reboot into Fastboot mode
On PC
Code:
fastboot flashing unlock
phone will ask to confirm.
Confirm using Volume buttons.
Realme c2 will Factory reset and restart.
After unlocking the bootloader whenever you Turn On / Reboot the phone a small message is displayed for few seconds. " ... Bootloader is unlocked ..."
The bootloader unlock worked 100%. but the root didn't work help realms c2 RMX1945
hydroponics_1 said:
Unlock APK is not required to unlock the bootloader of realme c2 RMX 1945.
Unlocking the bootloader will RESET the phone.
Instructions to unlock the bootloader of realme c2 RMX 1945:
On PC:
install usb drivers for your device (Realme C2).
install adb and fastboot ( SDK platform tools zip file).
On Realme C2:
Enable USB Debuging:
Settings -> About Phone -> Version ( tap 7 times)
Settings -> Additional Settings -> Developer options -> USB Debugging ( turn on)
Settings -> Additional Settings -> Developer options -> Oem unlock ( turn on)
Connect Realme C2 to PC using USB cable.
Select Transfer Files ( second option )
On PC open folder where adb.exe and fastboot.exe files are located.
Now type
Code:
cmd
in the address bar of File Explorer and hit Enter to open Command Prompt.
In Command Prompt type:
Code:
adb devices
On Realme C2 "Allow USB Debugging ? " message appears.
select ok.
On PC:
Code:
adb devices
Output should be:
Code:
List of devices attached <device serial number> device
On PC
Code:
adb reboot-bootloader
phone will reboot into Fastboot mode
On PC
Code:
fastboot flashing unlock
phone will ask to confirm.
Confirm using Volume buttons.
Realme c2 will Factory reset and restart.
After unlocking the bootloader whenever you Turn On / Reboot the phone a small message is displayed for few seconds. " ... Bootloader is unlocked ..."
Click to expand...
Click to collapse
Thanks @hydroponics_1. it is working
But after unlocking the bootloader, I cannot find key combination to enter in recovery mode.
pressing volume down and power now enter into fastboot mode.
is there any working recovery image for realme c2 RMX 1945?
There are none.. Either you can make it on your own using TWRP Builder or Build it directly how TWRP is build and then post it here after testing!
TheWarrior01 said:
There are none.. Either you can make it on your own using TWRP Builder or Build it directly how TWRP is build and then post it here after testing!
Click to expand...
Click to collapse
Even if I have working twrp image how can I boot to recovery from fastboot mode?
After flashing I can only boot to normal mode and stock rom will replace twrp with stock recovery.
n32 said:
Even if I have working twrp image how can I boot to recovery from fastboot mode?
After flashing I can only boot to normal mode and stock rom will replace twrp with stock recovery.
Click to expand...
Click to collapse
I don't have the device but adb reboot recovery should work right? Or Power Don + Power should lead to recovery in most mobile phones.
You can even use "fastboot boot recovery.img" where recovery.img is your TWRP recovery. you can use it to boot into TWRP and decrypt device if needed and then flash it permanently!
hey did you tried to flash or boot magisk patched boot img ???
Help unlocking bootloader and rooting lg phoenix 4
hydroponics_1 said:
Unlock APK is not required to unlock the bootloader of realme c2 RMX 1945.
Unlocking the bootloader will RESET the phone.
Instructions to unlock the bootloader of realme c2 RMX 1945:
On PC:
install usb drivers for your device (Realme C2).
install adb and fastboot ( SDK platform tools zip file).
On Realme C2:
Enable USB Debuging:
Settings -> About Phone -> Version ( tap 7 times)
Settings -> Additional Settings -> Developer options -> USB Debugging ( turn on)
Settings -> Additional Settings -> Developer options -> Oem unlock ( turn on)
Connect Realme C2 to PC using USB cable.
Select Transfer Files ( second option )
On PC open folder where adb.exe and fastboot.exe files are located.
Now type
Code:
cmd
in the address bar of File Explorer and hit Enter to open Command Prompt.
In Command Prompt type:
Code:
adb devices
On Realme C2 "Allow USB Debugging ? " message appears.
select ok.
On PC:
Code:
adb devices
Output should be:
Code:
List of devices attached <device serial number> device
On PC
Code:
adb reboot-bootloader
phone will reboot into Fastboot mode
On PC
Code:
fastboot flashing unlock
phone will ask to confirm.
Confirm using Volume buttons.
Realme c2 will Factory reset and restart.
After unlocking the bootloader whenever you Turn On / Reboot the phone a small message is displayed for few seconds. " ... Bootloader is unlocked ..."
Click to expand...
Click to collapse
I've recently bought the phoenix 4 lm-x210apm in having trouble with unlocking bootloader and rooting it have adb drivers installed and lg drivers installed I have minimal adb fastboot tool installed I entered adb devices and it registers my device and then I enter adb reboot bootloader and all it does is reboot the device not unfortunately bootloader I have USB debugging on oem unlocked and all that so what am I doing wrong please if someone could give me a step by step that would be awesome
Sam Ghosh said:
The bootloader unlock worked 100%. but the root didn't work help realms c2 RMX1945
Click to expand...
Click to collapse
did you try to extract boot image from Full Firmware zip & patched it with magisk ???
n32 said:
Thanks @hydroponics_1. it is working
But after unlocking the bootloader, I cannot find key combination to enter in recovery mode.
pressing volume down and power now enter into fastboot mode.
is there any working recovery image for realme c2 RMX 1945?
Click to expand...
Click to collapse
can you pull boot image & try to patch with magisk
siddhrsh said:
can you pull boot image & try to patch with magisk
Click to expand...
Click to collapse
Can you share the detailed step or link.
how can I to pull boot image and patch it.
n32 said:
Can you share the detailed step or link.
how can I to pull boot image and patch it.
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/software/guide-root-realme-c2-unlock-bootloader-t3970447
realme c2 doesnt allow bootloader unlocking. when I boot in fastboot mode the phone is not detected by the PC. I have fastboot adb drivers installed.
How are you guys able to unlock bootloader??
There are many realme phone whose bootloader is unlockable...
Can someone guide if its really possible.
Any help is appreciated. Thanks
coolboyforeva said:
realme c2 doesnt allow bootloader unlocking. when I boot in fastboot mode the phone is not detected by the PC. I have fastboot adb drivers installed.
How are you guys able to unlock bootloader??
There are many realme phone whose bootloader is unlockable...
Can someone guide if its really possible.
Any help is appreciated. Thanks
Click to expand...
Click to collapse
I am using Ubuntu as PC OS.
I unlocked bootloader of realme c2 by following the steps which I described on page 1.
Are you following the procedure exactly?
I think you have driver issue.
check USB devices in Device Manager when Phone is connected in fastboot mode.
Check by connecting USB cable in USB 2.0 port.
hydroponics_1 said:
I am using Ubuntu as PC OS.
I unlocked bootloader of realme c2 by following the steps which I described on page 1.
Are you following the procedure exactly?
I think you have driver issue.
check USB devices in Device Manager when Phone is connected in fastboot mode.
Check by connecting USB cable in USB 2.0 port.
Click to expand...
Click to collapse
Does it works on windows pc?
Another thing I want to know. Is VOLTE supported on GSI android 9 or android 10 ?
Pachboot.img file for RMX 1945
Please sand me the pachboot.img file for
Magisk root
Rmx 1945
And also send the
stock boot.img
And vbmeta .img
For RMX 1945 11.A.17
PLEASE PLEASE PLEASE
HELP
Does anyone knows which is the tool to flash stock rom? So far I cant find any reliable info. Has anyone managed to flash stock rom on realme c2 at home?
If yes please provide the rom link and the tool to flash the rom.
Thanks
[email protected] said:
Please sand me the pachboot.img file for
Magisk root
Rmx 1945
And also send the
stock boot.img
And vbmeta .img
For RMX 1945 11.A.17
PLEASE PLEASE PLEASE
HELP
Click to expand...
Click to collapse
I have extracted stock boot.img vbmeta .img and other .img files from realme c2 update zip file (RMX1941EX_11_OTA_0110_all_KypuujWoY710.ozip).
realme c2 model RMX 1945
version RMX1945EX_11_A.12
I am a new user and cannot post links.
Download and extract realme c2 update zip file from realme website. The zip contains stock boot.img and vbmeta .img for realme c2.
stock recovery.img for realme c2 rmx1941
help please i need stock recovery.img for realme c2 rmx 1941 thank you

Root Gigaset GS4

Hi guys. Is there any root method for the Gigaset Gs4? Thanks.
Anyone?
As long as you have the stock images there is.
Im currently trying to get the stock ROM in any way. If anyone has some tips please reply
Currently I'm trying to get the stock ROM using the image here: https://www.google.com/amp/s/unofficialtwrp.com/download-twrp-3-2-3-mediatek-mt6771-8-1/?amp
I hope that I can extract boot.img with it, to patch it with magisk.
Also take a look here:
Amazing Temp Root for MediaTek ARMv8 [2020-08-24]
Software root method for MediaTek MT67xx, MT816x, and MT817x! So it's no big secret that not too long ago, I found a way to achieve temporary root on MediaTek chipsets. No preinstalled root solution or device unlock was needed. The tool I...
forum.xda-developers.com
Edit: I found another image for the mt6771 that might work as well but keep in mind that it is not made for the Gigaset GS 4: https://www.techswizz.com/twrp-recovery-for-cubot-note-20-pro/ DOES NOT WORK!!
As soon as I got the patched image I think you can use this bypass to flash it: https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement/amp/ DOES NOT WORK!!
StarMiner99 said:
As long as you have the stock images there is.
Im currently trying to get the stock ROM in any way. If anyone has some tips please reply
Currently I'm trying to get the stock ROM using the image here: https://www.google.com/amp/s/unofficialtwrp.com/download-twrp-3-2-3-mediatek-mt6771-8-1/?amp
I hope that I can extract boot.img with it, to patch it with magisk.
Also take a look here:
Amazing Temp Root for MediaTek ARMv8 [2020-08-24]
Software root method for MediaTek MT67xx, MT816x, and MT817x! So it's no big secret that not too long ago, I found a way to achieve temporary root on MediaTek chipsets. No preinstalled root solution or device unlock was needed. The tool I...
forum.xda-developers.com
Edit: I found another image for the mt6771 that might work as well but keep in mind that it is not made for the Gigaset GS 4: https://www.techswizz.com/twrp-recovery-for-cubot-note-20-pro/
As soon as I got the patched image I think you can use this bypass to flash it: https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement/amp/
Click to expand...
Click to collapse
i managed to extract the stock boot.img and recovery.img using this guide with some modifications:
How to use Wwr MTK + SP Flash tool to backup Mediatek rom
This is a step-by-step guide on how to use Wwr MTK tool & SP flash tool to backup Mediatek (MTK) firmware. We had previously created guides on how to backup or dump firmware from a Mediatek (MTK) devi
forum.hovatek.com
things i did different:
i could not preform the ram test to determine the size of emmc_user so i just used a random length(0x3a3e00000) later on WwR told me that emmc_user should be: 0xe8f800000 i used this value to again read the emmc_user region and loaded it into WwR and continued on the rutorial.
now with this information we should be able to patch boot.img using magisk and flash it to our devices to root it.
to flash your device do the following: reboot into fastboot mode (power + volume up and select fastboot) then in a terminal type:
to unlock the bootloader:
fastboot flashing unlock
to flash an image to your device:
fastboot flash <partition> <image>
the stock images and the scatter file will follow
I managed to succesfully root my smartphone using magisk there was a single problem which is the following:
Android verified boot
you need to flash a new vbmeta image
i made my own empty vbmeta image and flashed it now its working and my smartphone is rooted
[HOW TO ROOT AND HOW TO INSTALL TWRP]
DISCLAIMER:
I will not be responsible for any damage to you device !!!!
step 1 :
make a backup of your smartphone data
step 2 :
unlock your bootloader
1. go to settings -> about phone -> click a few times on the build number
2. go to settings -> system -> developer options -> allow OEM unlocking
step 3 :
install adb and fastboot on your computer
https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790/ <- you can download a minimal version here
step 4 :
enable usb debugging
go to settings -> system -> developer options -> enable usb-debugging
step 5 :
open a console on your computer and do the adb and fastboot stuff
type the following commands into your cmd:
adb reboot bootloader <- this will reboot your smartphone into fastboot mode
wait until your phone enters fastboot mode
as soon as your phone entered fastboot mode type the following:
fastboot flashing unlock <- this will unlock your bootloader you have to press volume up to confirm it
then flash vbmeta and magisk patched:
fastboot flash vbmeta vbmeta_disabled.img <- this will flash the new vbmeta file
[ROOT]
fastboot flash boot magisk_patched-23000_tvNQq.img <- this will flash the new boot image
[TWRP]
fastboot flash recovery twrp.img <- this will flash the new recovery image
step 6 :
reboot your phone and reconfigure it
Youre Done!
EDIT: please download the twrp image from the official TWRP site: https://twrp.me/gigaset/gigasetgs4.html
@StarMiner99 as I'm thinking about buying it I'm glad to know it can be rooted.
bmwdroid said:
@StarMiner99 as I'm thinking about buying it I'm glad to know it can be root
Click to expand...
Click to collapse
well it was not easy to get the stock images xD
im currently also trying to port lineage os and twrp to the gigaset gs4
StarMiner99 said:
im currently also trying to port lineage os and twrp to the gigaset gs4
Click to expand...
Click to collapse
That's good to hear.
Although if it can be rooted it might be sufficient for me to kill all not needed apps via adb and use Magisk for AFWall+.
Actually I've read about the possibility of a GS version with a better camera so I might wait a while before getting one.
well there arent any unneeded apps
[STOCK ROM + SCATTER FILES + PRELOADER]
here are the stock rom files, the scatter file and the preloader in a zip archive
1.5 GB file on MEGA
mega.nz
StarMiner99 said:
[STOCK ROM + SCATTER FILES + PRELOADER]
here are the stock rom files, the scatter file and the preloader in a zip archive
1.5 GB file on MEGA
mega.nz
Click to expand...
Click to collapse
Hey StarMiner99, is the ADUPS software updating malware in the image you uploaed still working? Could hyou please explain briefly how to flash this stock rom? I have adb and fastboot already running and a rooted device too.
Thanks a lot!
StarMiner99 said:
im currently also trying to port lineage os and twrp to the gigaset gs4
Click to expand...
Click to collapse
any progress on this?
could i do something to help?
First of all: Thank you very much! Everything has worked so far and the device is rooted.
But I still have one question. How does the device behave when the official updates from Gigaset are installed via OTA? The GS4 reports it would have security updates. Can I install them without losing root privileges? Does anyone already have experience? Thanks in advance!
UserSven said:
First of all: Thank you very much! Everything has worked so far and the device is rooted.
But I still have one question. How does the device behave when the official updates from Gigaset are installed via OTA? The GS4 reports it would have security updates. Can I install them without losing root privileges? Does anyone already have experience? Thanks in advance!
Click to expand...
Click to collapse
I have now simply installed the June 2021 update. The good news: It worked. The slightly less good news is that you have to flash the images again. But flashing also works with the latest version and the update check tells that there are no new updates. So it seems to work.
UserSven said:
I have now simply installed the June 2021 update. The good news: It worked. The slightly less good news is that you have to flash the images again. But flashing also works with the latest version and the update check tells that there are no new updates. So it seems to work.
Click to expand...
Click to collapse
Which recovery do you use?
I've read in their forum that updating doesn't work when on TWRP.
StarMiner99 said:
im currently also trying to port lineage os and twrp to the gigaset gs4
Click to expand...
Click to collapse
Why are you not just using the LineageOS GSI?
I have LineageOS17.1 running on my GS4 since Feb. without any issues so far.
ChrisMucDev said:
Why are you not just using the LineageOS GSI?
I have LineageOS17.1 running on my GS4 since Feb. without any issues so far.
Click to expand...
Click to collapse
Is there a tutorial on how to do that?
Wolfgang-Z said:
Is there a tutorial on how to do that?
Click to expand...
Click to collapse
Here is, what I did: (on your own risk)
As far as i can remember, i did not have any issues.
Step 1: Unlock your device
1. Enable Developer Options: Tap 10x on Build-Number (Setttings -> About the phone -> Build-Number)
2. Enable Bootloader Unlocking -> activate OEM-Unlock option (Settings -> System -> (More) -> Developer-Options)
3. Enable ADB Access -> Enable USB-Debugging / ADB (Settings -> System -> (More) -> Developer-Options)
4. (Set USB-Settings (Message-Center) from "No tx" to "PTP")
5. Connect phone to usb port, grant permissions on phone and check connection with `adb devices`
6. Boot to bootloader: `adb reboot bootloader`
7. Unlock Bootloader: `fastboot flashing unlock`
Step 2: Download GSI
1. Reboot your phone and install Treble Info App
(https://play.google.com/store/apps/details?id=tk.hack5.treblecheck&hl=en&gl=US)
GS4 should support AB-Partitions
2. Download GSI: https://sourceforge.net/projects/andyyan-gsi/files/
For GS4: treble_arm64_bv*
Step 3: Install GSI
1. Boot to recovery: `adb reboot recovery` or Volume Down + Power
2. Wipe data
3. Wipe cache
4. Enter fastboot
5. Flash GSI: `fastboot flash system <extracted-gsi-image>`
6. Reboot and enjoy
*. (just in case it does not boot, reboot to recovery -> enter fastboot and flash vbmeta: `fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img`)
This vbmeta-image should work (see post #6): https://forum.xda-developers.com/attachments/vbmeta_disabled-img.5325563/

Tecno sparl 4

HI Develoopers, please can anyone help me to solve my Tecno spark 4.
it doesn't boot and i tried to re-install new rom but i can't access the usb debugging since the phone won't boot.
how can i enable usb debugging in factory reset/recovery mode?
If a TWRP for this phone exists then you can try to boot into this TWRP - what is done by means of Fastboot - and from within TWRP you can enable USB-debugging because TWRP has an ADB interface and support.
jwoegerbauer said:
If a TWRP for this phone exists then you can try to boot into this TWRP - what is done by means of Fastboot - and from within TWRP you can enable USB-debugging because TWRP has an ADB interface and support.
Click to expand...
Click to collapse
no twrp
FramFako1 said:
no twrp
Click to expand...
Click to collapse
There are no TWRP just the default

Categories

Resources