Database Info

[TOOL] Moto E Firmware Restore and or Relock bootloader also unroot

Warning use these files at your own risk. I am not responsible for what you do to your devices
These are some Batch files that i made up to make it easy to unbrick, unroot, restore, relock, and remove the unlocked bootloader logo.
Hope this helps some of you guys out. I am placing all the files you will need in the zips so that all you have to do is extract them to your desktop and run the batch file of your choosing. also make sure you run the motorola device manager program first to get the drivers installed that you need.
you have to place your device in bootloader mode / fastboot mode to use these batch files.
1. turn off phone
2. hold both volume up and down
3. while holding up and down hold power for 5 seconds then release power.
4. now you should see bootloader menu this is fastboot mode.
5. plug in cable to your computer and run a batch file
Batch Files
Remove unlock bootloader logo
Restore & Relock Bootloader full wipe
Restore Firmware No Data Wipe
Normal Stock Firmware Restore
Note the Stock XML file is included if you want to use RSDLite to restore your device.
Android Version 4.4.2
To Find out what Firmware you need. Go to settings on your Moto E then scroll down to about phone and look at the info there.
Check For Your Firmware Here
If your Firmware isnt listed then please comment with your about phone info and i will see if i can add it.

+1 bro....Very useful , you made things easier....

:thumbup:

mits619 said:
+1 bro....Very useful , you made things easier....
Click to expand...
Click to collapse
_SGY said:
:thumbup:
Click to expand...
Click to collapse
Glad you guys like the tools

I want to ask if this would work if i only want to remove the 'warning unlocked bootloader' logo on XT1022 ?

so does it mean... even if we unlock the bootloader, we can relock it again and hence our warranty is back

[email protected] said:
so does it mean... even if we unlock the bootloader, we can relock it again and hence our warranty is back
Click to expand...
Click to collapse
No the device will say locked but will have a status code of 2 not 0 so they will still know it was unlocked

priyank.g said:
I want to ask if this would work if i only want to remove the 'warning unlocked bootloader' logo on XT1022 ?
Click to expand...
Click to collapse
yes you can use that batch file and only remove the unlock logo

Remove, I'm stupid

okaryn said:
Remove, I'm stupid
Click to expand...
Click to collapse
LOL it all good

where is the batch file and does it work for XT1022

yup you can!!
priyank.g said:
I want to ask if this would work if i only want to remove the 'warning unlocked bootloader' logo on XT1022 ?
Click to expand...
Click to collapse
yup u can flash logo.bin and restore your stock motorola logo instead of warning boot loader unlocked... :angel::angel:
use the file attached and flash it using fastboot... :laugh::laugh:
put your phone in boot loader mod and connect it to pc
paste the attached file in fastboot folder
open fastboot and flash using below command
Code:
fastboot flash logo logo.bin
If It Worked Dont Forget To Press Thanks Button :good::good::good::good:
Download Link
Logo.bin : http://www4.zippyshare.com/v/49199314/file.html

iblaziner786 said:
yup u can flash logo.bin and restore your stock motorola logo instead of warning boot loader unlocked... :angel::angel:
use the file attached and flash it using fastboot... :laugh::laugh:
put your phone in boot loader mod and connect it to pc
paste the attached file in fastboot folder
open fastboot and flash using below command
Code:
fastboot flash logo logo.bin
If It Worked Dont Forget To Press Thanks Button :good::good::good::good:
Download Link
Logo.bin : http://www4.zippyshare.com/v/49199314/file.html
Click to expand...
Click to collapse
well it was already there from weeks http://forum.xda-developers.com/showpost.php?p=52692225&postcount=2

reserved
---------- Post added at 01:41 PM ---------- Previous post was at 01:40 PM ----------
reserved 2

Where is bat files?

HTML:
[QUOTE="Tomsgt, post: 53405510, member: 4246643"]Warning use these files at your own risk. I am not responsible for what you do to your devices
These are some Batch files that i made up to make it easy to unbrick, unroot, restore, relock, and remove the unlocked bootloader logo.
Hope this helps some of you guys out. I am placing all the files you will need in the zips so that all you have to do is extract them to your desktop and run the batch file of your choosing. also make sure you run the motorola device manager program first to get the drivers installed that you need.
you have to place your device in bootloader mode / fastboot mode to use these batch files.
1. turn off phone
2. hold both volume up and down
3. while holding up and down hold power for 5 seconds then release power.
4. now you should see bootloader menu this is fastboot mode.
5. plug in cable to your computer and run a batch file
Batch Files
Remove unlock bootloader logo
Restore & Relock Bootloader full wipe
Restore Firmware No Data Wipe
Normal Stock Firmware Restore
Note the Stock XML file is included if you want to use RSDLite to restore your device.
Android Version 4.4.2
To Find out what Firmware you need. Go to settings on your Moto E then scroll down to about phone and look at the info there.
[URL="http://rootjunkysdl.com/?device=Moto%20E%20XT1023&folder=Moto%20E%204.4.2%20Restore%20and%20Relock%20tools"]Check For Your Firmware Here[/URL]
If your Firmware isnt listed then please comment with your about phone info and i will see if i can add it.[/QUOTE]
Hello! does this tool support the Indian variant?

Tomsgt said:
Warning use these files at your own risk. I am not responsible for what you do to your devices
These are some Batch files that i made up to make it easy to unbrick, unroot, restore, relock, and remove the unlocked bootloader logo.
Hope this helps some of you guys out. I am placing all the files you will need in the zips so that all you have to do is extract them to your desktop and run the batch file of your choosing. also make sure you run the motorola device manager program first to get the drivers installed that you need.
you have to place your device in bootloader mode / fastboot mode to use these batch files.
1. turn off phone
2. hold both volume up and down
3. while holding up and down hold power for 5 seconds then release power.
4. now you should see bootloader menu this is fastboot mode.
5. plug in cable to your computer and run a batch file
Batch Files
Remove unlock bootloader logo
Restore & Relock Bootloader full wipe
Restore Firmware No Data Wipe
Normal Stock Firmware Restore
Note the Stock XML file is included if you want to use RSDLite to restore your device.
Android Version 4.4.2
To Find out what Firmware you need. Go to settings on your Moto E then scroll down to about phone and look at the info there.
Check For Your Firmware Here
If your Firmware isnt listed then please comment with your about phone info and i will see if i can add it.
Click to expand...
Click to collapse
no download link for the batch files...how to relock my device?
---------- Post added at 11:52 AM ---------- Previous post was at 11:08 AM ----------
Tomsgt said:
No the device will say locked but will have a status code of 2 not 0 so they will still know it was unlocked
Click to expand...
Click to collapse
Does it mean now that i can update to stock 5.1 without bricking my device? Mail me at [email protected]

I have installed resurrection ROM on my moto E, XT1022. I want to unroot my phone, flash original kitkat stock rom and relock my bootloader. I am not able to find the desired file.I am from India so i will need a stock rom for India or Asia. Kindly help.
Thanks

Moto E1 XT1019 Republic Wireless -- 5+ Years stuck at "AP Fastboot Flash Mode (S) / Device is LOCKED. Status Code: 0" when it was performing an automatic update from Android. Motorola wanted more $$ than buying new phone then and now. Froze SEP 2014, purchased 18 months prior. Can't find anything for this specific phone, and unsure whether using RW unique HW/SW mods -- especially as early version of their 'calls via WiFi' tech. Any assistance rewarded with my eternal gratitude (used to help ppl myself as a BBS SysOp -- yes that ancient).

ran2xda said:
Moto E1 XT1019 Republic Wireless -- 5+ Years stuck at "AP Fastboot Flash Mode (S) / Device is LOCKED. Status Code: 0" when it was performing an automatic update from Android. Motorola wanted more $$ than buying new phone then and now. Froze SEP 2014, purchased 18 months prior. Can't find anything for this specific phone, and unsure whether using RW unique HW/SW mods -- especially as early version of their 'calls via WiFi' tech. Any assistance rewarded with my eternal gratitude (used to help ppl myself as a BBS SysOp -- yes that ancient).
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=24459283995315996

Honor 8 Bricked

Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.

Flo.B said:
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Click to expand...
Click to collapse
But please confirm , was the update from b120 to b316 successfull?
Sent from my KIW-L22 using Tapatalk

gopinaidu77 said:
But please confirm , was the update from b120 to b316 successfull?
Click to expand...
Click to collapse
I think it failed because the warning screen showed right?
Sent from my honor 5X using XDA Labs

adriansticoid said:
I think it failed because the warning screen showed right?
Click to expand...
Click to collapse
Right that was what I am also thinking bro.
---------- Post added at 01:35 PM ---------- Previous post was at 01:35 PM ----------
adriansticoid said:
I think it failed because the warning screen showed right?
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
So it's a failure . which mean that it is a semi flashed update . which doesn't installed update.app .
Extract update.app from ota and put it in dload folder .later flash it manually using dload method .
He should follow this way to overcome those reboots
Sent from my KIW-L22 using Tapatalk
---------- Post added at 01:36 PM ---------- Previous post was at 01:35 PM ----------
Flo.B said:
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Click to expand...
Click to collapse
Consider reading my above post bro.
Sent from my KIW-L22 using Tapatalk

HONOR 8 Bricked
Hello ,
It happened on my FRD-L04, but I think is the same.
Bootloader is unlocked ?
1. Do you have all drivers installed ? OK
2.Do you have STOCK ROM ? OK. If not, use Huawei Firmare Finder to find suitable ROM. Be aware what you choose !!!
3. Unzipp (WinRar) the ROM.
4.Download and install Huawei Update Extractor. Run Huawei Update Extractor . Choose Update.app from the folder you unzipped the ROM.
5. Select cust.img , boot.img , recovery.img and system.img and extract them on a folder.
6.. Install MultiTool by Team (Multi Tool Team). The instalation will make a folder named UNBRICK.
7. Move the files extracted : cust.img , boot.img , recovery.img and system.img on the folder UNBRICK
8. Run MultiTool . Choose option 6 (unbrick) and after that choose option 2 ( if you already have files on folder UNBRICK)
9. Let the tool finish the job.
NOTE : You must have all drivers installed and the phone in FASTBOOT mode ( turn phone OFF - Press VOL- and insert USB cable simultaneously.)
Good luck !

Hi, thanks everyone for your reply.
Unfortunatly, the dload method seems not work. I think that to run this method, i need to press simultaneously vol+, vol- and the power button to run it, right ?
If it's like that, the method doesn't work anymore.
I will try the process given by technoguy09 and I said to you if it's ok !

So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?

Flo.B said:
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Click to expand...
Click to collapse
Was the bootloader unlocked ?
Do u have twrp installed ?
Sent from my KIW-L22 using Tapatalk
---------- Post added at 03:53 PM ---------- Previous post was at 03:53 PM ----------
Flo.B said:
Hi, thanks everyone for your reply.
Unfortunatly, the dload method seems not work. I think that to run this method, i need to press simultaneously vol+, vol- and the power button to run it, right ?
If it's like that, the method doesn't work anymore.
I will try the process given by technoguy09 and I said to you if it's ok !
Click to expand...
Click to collapse
If u have twrp I will make a flashable zip of stock ROM and cust
Sent from my KIW-L22 using Tapatalk

The bootloader is unlock and TWRP was install but now I can't access it. I try to restore stock recovery and it's the same result.

Flo.B said:
The bootloader is unlock and TWRP was install but now I can't access it. I try to restore stock recovery and it's the same result.
Click to expand...
Click to collapse
Can fastboot detect your phone?

Yes, fastboot is detect, I can launch some command (fastboot devices display my phone, flash etc) everything work but flash recovery didn't change anything and flash system response an error (sparse flash write failure).

Flo.B said:
Yes, fastboot is detect, I can launch some command (fastboot devices display my phone, flash etc) everything work but flash recovery didn't change anything and flash system response an error (sparse flash write failure).
Click to expand...
Click to collapse
From what you said, looks like it is reallt bricked. Service center is your friend.

I think too... I hope that there will be no problem with service center because of the phone is unclocked !
I was never had this kind of problem with my previous android phone. I'm really bad ^^
Thanks for all everybody.

Flo.B said:
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Click to expand...
Click to collapse
Try another ROM.

Flo.B said:
I think too... I hope that there will be no problem with service center because of the phone is unclocked !
I was never had this kind of problem with my previous android phone. I'm really bad ^^
Thanks for all everybody.
Click to expand...
Click to collapse
Goodluck with it buddy.

technoguy09 said:
Try another ROM.
Click to expand...
Click to collapse
I try at least 3 ROM download on different website. I don't think that it can change anything.

I had the same problem.
Dont worry, Honor 8 phones are nearly unbrickable.
Take your B120 ROM extract recovery, cust and boot partitions. (use huawei update extractor)
Flash Them via fastboot (adb) then force the dload method via the 3 buttons combo.
I had all the problems you described and restored my phone as new. (even the "sparse flash write failure" error)
Now i'm on EMUI 5 rooted, no problem
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
Please refer this thread as it might help you.
http://forum.xda-developers.com/mate-8/general/fuss-debrick-restore-mate-8-t3457969
Have a little faith in your Honor

Flo.B said:
I try at least 3 ROM download on different website. I don't think that it can change anything.
Click to expand...
Click to collapse
Did you use Huawei Firmare Finder for your model ?

morpheus302 said:
I had the same problem.
Dont worry, Honor 8 phones are nearly unbrickable.
Take your B120 ROM extract recovery, cust and boot partitions. (use huawei update extractor)
Flash Them via fastboot (adb) then force the dload method via the 3 buttons combo.
I had all the problems you described and restored my phone as new. (even the "sparse flash write failure" error)
Now i'm on EMUI 5 rooted, no problem
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
Please refer this thread as it might help you.
http://forum.xda-developers.com/mate-8/general/fuss-debrick-restore-mate-8-t3457969
Have a little faith in your Honor
Click to expand...
Click to collapse
I have extract all this img but the flash of cust won't work too so, the dload method can't be launch. Now, I send my phone to the service center yesterday. Wait and See ^^
technoguy09 said:
Did you use Huawei Firmare Finder for your model ?
Click to expand...
Click to collapse
Yes, I Download 2 ROM on it but same problem on both.

Flo.B said:
I have extract all this img but the flash of cust won't work too so, the dload method can't be launch. Now, I send my phone to the service center yesterday. Wait and See ^^
Yes, I Download 2 ROM on it but same problem on both.
Click to expand...
Click to collapse
Leave it for service centre people .they will take care
Sent from my KIW-L22 using Tapatalk

Help, moto G is stuck in M screen (or bootloader unlocked as it is unlocked)

i had the problem, when the cell, automatic restarted and it stuck on this screens, but it never came back, i already tried flashing the cellphone, and i already tried adding a custom bootloader, but no luck, it gave me the information that it mismatch, and attempts to enter the bootloader, without luck, i also already tried to only boot with fastboot, and no luck, it stucks on the twrp or m screen or shows different issues like screen fading or rumbling without reason, attempted to enter the recovery and only got to normal recovery from android, attempted to sideload the zip, and got a verification error, and it fails, again, i cant install a custom recovery, it always fails, and i dont know what to do... i really need help, any suggestion?? i already searched and didnt found any tools, flasher tool v.2 not found, and other tools are not able to help as well, help!!
edit, forgot to add, its an moto g. 2013 , xt1032 ANDROID LOLLIPOP

x-fighter said:
i had the problem, when the cell, automatic restarted and it stuck on this screens, but it never came back, i already tried flashing the cellphone, and i already tried adding a custom bootloader, but no luck, it gave me the information that it mismatch, and attempts to enter the bootloader, without luck, i also already tried to only boot with fastboot, and no luck, it stucks on the twrp or m screen or shows different issues like screen fading or rumbling without reason, attempted to enter the recovery and only got to normal recovery from android, attempted to sideload the zip, and got a verification error, and it fails, again, i cant install a custom recovery, it always fails, and i dont know what to do... i really need help, any suggestion?? i already searched and didnt found any tools, flasher tool v.2 not found, and other tools are not able to help as well, help!!
edit, forgot to add, its an moto g. 2013 , xt1032 ANDROID LOLLIPOP
Click to expand...
Click to collapse
which bootloader?
locked?
which firmware?
flashed how?
Sent from my PH-1 using XDA Labs

sd_shadow said:
which bootloader?
locked?
which firmware?
flashed how?
Sent from my PH-1 using XDA Labs
Click to expand...
Click to collapse
i am unable to use other than the normal bootloader, htt p://cdn.droidviews.com/wp-content/uploads/2014/02/moto-g-bootloader-mode.jpg but mine says unlocked code 3, i used fastboot to attempted to flash the phone, and nothing changed. it has the stock firmware lollipop 5.0.2, codename falcon, i flashed it with fastboot, but no luck, attempted to added by sideload on the android recovery default, and it gives me the errorhttp s://i.imgur.com/nSFMea9.jpg and i am unable to add any file, it doesnt has external sd

x-fighter said:
i am unable to use other than the normal bootloader, htt p://cdn.droidviews.com/wp-content/uploads/2014/02/moto-g-bootloader-mode.jpg but mine says unlocked code 3, i used fastboot to attempted to flash the phone, and nothing changed. it has the stock firmware lollipop 5.0.2, codename falcon, i flashed it with fastboot, but no luck, attempted to added by sideload on the android recovery default, and it gives me the errorhttp s://i.imgur.com/nSFMea9.jpg and i am unable to add any file, it doesnt has external sd
Click to expand...
Click to collapse
https://m.imgur.com/nSFMea9
http://cdn.droidviews.com/wp-content/uploads/2014/02/moto-g-bootloader-mode.jpg
Sent from my PH-1 using XDA Labs
---------- Post added at 01:48 PM ---------- Previous post was at 01:47 PM ----------
neither one of those says what files you are trying to flash
Sent from my PH-1 using XDA Labs

attached
Sent from my PH-1 using XDA Labs

x-fighter said:
i am unable to use other than the normal bootloader, htt p://cdn.droidviews.com/wp-content/uploads/2014/02/moto-g-bootloader-mode.jpg but mine says unlocked code 3, i used fastboot to attempted to flash the phone, and nothing changed. it has the stock firmware lollipop 5.0.2, codename falcon, i flashed it with fastboot, but no luck, attempted to added by sideload on the android recovery default, and it gives me the errorhttp s://i.imgur.com/nSFMea9.jpg and i am unable to add any file, it doesnt has external sd
Click to expand...
Click to collapse
From the picture you uploaded, says that your bootloader is locked, so that is why you can't flash any custom recovery. First you need to unlock your bootloader first but BACKUP FIRST, cause it will erase your internal storage when you unlock your bootloader. After unlocked, then you can flash custom recovery. Hope that helps.
Edit: but if your bootloader is really already unlocked, than try this, flashed twrp, then power down your phone by pressing the power button, then boot to twrp by press power button + volume down buttom. Don't reboot to twrp using the option im bootloader mode or using adb.

tepar said:
From the picture you uploaded, says that your bootloader is locked, so that is why you can't flash any custom recovery. First you need to unlock your bootloader first but BACKUP FIRST, cause it will erase your internal storage when you unlock your bootloader. After unlocked, then you can flash custom recovery. Hope that helps.
Edit: but if your bootloader is really already unlocked, than try this, flashed twrp, then power down your phone by pressing the power button, then boot to twrp by press power button + volume down buttom. Don't reboot to twrp using the option im bootloader mode or using adb.
Click to expand...
Click to collapse
i will upload a more reccent one, where i already unlocked it, but i will try whaat you edited, thank you!! let me try and post results

Google Pixel Flasher Using QPST

Hello
I have a Google pixel 128 GB device but recently it got bricked after an ota update. Unfortunately my phone is not rooted or unlocked. So I could not do anything under fastboot, also adb is crashed.
So the phone is bricked. But it can be rectified using QPST is edl mode I suppose. But as of now there is no such development for qpst for Google pixel.
But there are many users they face the same issue recently.
Is there any chance of development for it?

you said bootloader ! you mean the phone can boot into bootloader mode ! after that you said edl mode ? i dont understand. please explain. i may help !

*The Phone Goes into Fastboot with no problems.
*In Fastboot Mode if i try to go to Recovery, The Phone Reboots and does not go to the Recovery But it Keeps on Rebooting.
So the Recovery Partition of the Phone might be Corrupted.
So im looking for ways to Flash the Recovery partition with QPST or any other methods.
Fastboot Doesn't Help Because the Bootloader is locked.

senthil19 said:
*The Phone Goes into Fastboot with no problems.
*In Fastboot Mode if i try to go to Recovery, The Phone Reboots and does not go to the Recovery But it Keeps on Rebooting.
So the Recovery Partition of the Phone might be Corrupted.
So im looking for ways to Flash the Recovery partition with QPST or any other methods.
Fastboot Doesn't Help Because the Bootloader is locked.
Click to expand...
Click to collapse
Download factory image, open up the .sh script as text, copy the fastboot commands about wiping and clearing userdata, cache , etc into a terminal using fastboot

Xdevillived666 said:
Download factory image, open up the .sh script as text, copy the fastboot commands about wiping and clearing userdata, cache , etc into a terminal using fastboot
Click to expand...
Click to collapse
I do believe I've tried this to no avail on a Verizon g-2pw4100-022-b (the "b" probably stands for "brickable").
I'm stuck in the same situation:
Power+vol down - bootloader
Bootloader to recovery - boot loop
Bootloader to barcodes - barcodes show
Edit: power on only leads to constant screen flashing unless you hold volume down for bootloader, at which point you can vol up once and power down.
Can't flash a recovery, can't flash an OTA since that requires adb sideload, which is part of recovery, and can't flash a factory image with the bootloader locked, which is only unlocked under development tools.
One thing to note is that in the bootloader screen, both "b/l" and the one below it (radio?) both say "n/a", which leads me to believe the December update from Verizon could be the cause.
Suggestions as to how to proceed are greatly appreciated.

senthil19 said:
Hello
I have a Google pixel 128 GB device but recently it got bricked after an ota update. Unfortunately my phone is not rooted or unlocked. So I could not do anything under fastboot, also adb is crashed.
So the phone is bricked. But it can be rectified using QPST is edl mode I suppose. But as of now there is no such development for qpst for Google pixel.
But there are many users they face the same issue recently.
Is there any chance of development for it?
Click to expand...
Click to collapse
I have a Reddit thread how to activate qpst .
You can also "adb reboot edl" if your PC can recognize your phone at least.
If not, power button and volume up(or down, I don't remember) for at least forty seconds sometimes brings it up
But then you'd need firmware to flash with qpst and I'm not sure how to go about doing that
---------- Post added at 07:44 AM ---------- Previous post was at 07:42 AM ----------
PoXFreak said:
I do believe I've tried this to no avail on a Verizon g-2pw4100-022-b (the "b" probably stands for "brickable").
I'm stuck in the same situation:
Power+vol down - bootloader
Bootloader to recovery - boot loop
Bootloader to barcodes - barcodes show
Edit: power on only leads to constant screen flashing unless you hold volume down for bootloader, at which point you can vol up once and power down.
Can't flash a recovery, can't flash an OTA since that requires adb sideload, which is part of recovery, and can't flash a factory image with the bootloader locked, which is only unlocked under development tools.
One thing to note is that in the bootloader screen, both "b/l" and the one below it (radio?) both say "n/a", which leads me to believe the December update from Verizon could be the cause.
Suggestions as to how to proceed are greatly appreciated.
Click to expand...
Click to collapse
Can you fastboot boot twrp ?

Are there any solutions to enter EDL Mode in google pixel without adb?

[Recovery][cv1] TWRP 3.2.3.0 For LM-X210 Devices

Compatible Devices:
LG K8+
LG Aristo 2, 2+
LG K9
LG Phoenix 4
Thanks to @AustinGarrick1818 who discovered that this TWRP originally started and developed for the Aristo 2, by @messi2050 and @armandop_, then later updated to the latest version by @tecknight, was able to be flash on the Phoenix 4 leading to the idea that any cv1 device is cable of a ROOT method/TWRP Recovery.
Pre-Requisites:
USB Debugging Enabled​
OEM Unlock Enabled​
ADB/Fastboot Device Drivers​
Your Phone/Brain​
Hey guys! Just a heads up, I'm not responsible for any bricked devices or broken devices. So flash at your own risk! This TWRP has the Oreo Kernel from the Aristo 2's Oreo Firmware release.
Downloads
Latest Recovery by @tecknight Here --> https://www.androidfilehost.com/?fid=11410963190603906754​Latest USB Drivers --> https://www.lg.com/us/support/software-firmware-drivers​
Instructions:
1. Install the ADB Drivers from above. If you have them don't bother. Just move on. If you don't then make sure to install them somewhere easily accessible, as your gonna want to get to them easily.
2. Place the TWRP image in the ADB Folder for later use and plug your phone into your PC. Then press (Shift+Right Click) and select "Open Command Prompt Here".
3. After that type the next few lines of code:
Code:
adb devices
Code:
adb reboot bootloader
4. It should boot into fastboot mode. From there type:
Code:
fasboot devices
Code:
fastboot flashing unlock
5. To prevent fastboot from encrypting cache and data type:
Code:
fastboot erase userdata
Code:
fastboot erase cache
6.Remember the Recovery image? Rename it to rec.img and flash it like this:
Code:
fastboot flash recovery rec.img
7. Now that you've flashed TWRP test it:
Code:
fastboot reboot recovery
NOTE: Anytime you boot up your phone you will get a message saying that the bootloader is locked and you need to lock it. Don't do it. If you do then you phone will soft brick and get stuck in a bootloop. Just let it boot.
8. If you did everything right you should be brought to TWRP.
PLEASE LEAVE A THANKS! THANKS!

Downgrade?
Hey man thanks for pointing out that this will work with the all cv1 devices... I have the Aristo 2 on Metro... Is it possible to flash twrp while on the official Oreo firmware or do I have to downgrade to Nougat?
Last time I was on xda it was stated that you couldn't flash in fastboot while on official Oreo...

tdawgg777 said:
Hey man thanks for pointing out that this will work with the all cv1 devices... I have the Aristo 2 on Metro... Is it possible to flash twrp while on the official Oreo firmware or do I have to downgrade to Nougat?
Last time I was on xda it was stated that you couldn't flash in fastboot while on official Oreo...
Click to expand...
Click to collapse
Yah, it's still like that unfortunately. But you can downgrade to Nougat with LG Uppercut. You should just flash the TWRP on Nougat firmware because it's not locked. So when you downgrade just follow these steps to get Oreo. Also don't install Tec's version of Oreo Firmware. Just jump to my other thread for my Custom Stock ROM. Tec's flashes Oreo Firmware with Oreo Stock Rooted. But mine just flashes the nesassary Oreo Boot and System. The links on my signature.
By the way for anyone wondering the LG Phoenix 4 can be Rooted this way to.

NonStickAtom785 said:
Compatible Devices:
LG K8+
LG Aristo 2, 2+
LG K9
LG Phoenix 4
Thanks to @AustinGarrick1818 who discovered that this TWRP originally started and developed for the Aristo 2, by @messi2050 and @armandop_, then later updated to the latest version by @tecknight, was able to be flash on the Phoenix 4 leading to the idea that any cv1 device is cable of a ROOT method/TWRP Recovery.
Pre-Requisites:
USB Debugging Enabled
OEM Unlock Enabled
ADB/Fastboot Device Drivers
Your Phone/Brain
Hey guys! Just a heads up, I'm not responsible for any bricked devices or broken devices. So flash at your own risk! This TWRP has the Oreo Kernel from the Aristo 2's Oreo Firmware release.
Downloads
Latest Recovery by @tecknight Here --> https://www.androidfilehost.com/?fid=11410963190603906754
Latest USB Drivers --> http://tool.cdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
Instructions:
1. Install the ADB Drivers from above. If you have them don't bother. Just move on. If you don't then make sure to install them somewhere easily accessible, as your gonna want to get to them easily.
2. Place the TWRP image in the ADB Folder for later use and plug your phone into your PC. Then press (Shift+Right Click) and select "Open Command Prompt Here".
3. After that type the next few lines of code:
4. It should boot into fastboot mode. From there type:
5. To prevent fastboot from encrypting cache and data type:
6.Remember the Recovery image? Rename it to rec.img and flash it like this:
7. Now that you've flashed TWRP test it:
NOTE: Anytime you boot up your phone you will get a message saying that the bootloader is locked and you need to lock it. Don't do it. If you do then you phone will soft brick and get stuck in a bootloop. Just let it boot.
8. If you did everything right you should be brought to TWRP.
PLEASE LEAVE A THANKS! THANKS!
Click to expand...
Click to collapse
If fastboot flashing unlock fails try fastboot oem unlock

tdawgg777 said:
Hey man thanks for pointing out that this will work with the all cv1 devices... I have the Aristo 2 on Metro... Is it possible to flash twrp while on the official Oreo firmware or do I have to downgrade to Nougat?
Last time I was on xda it was stated that you couldn't flash in fastboot while on official Oreo...
Click to expand...
Click to collapse
As long as your bootloader is unlocked it won't be a problem at least on the LG Phoenix 4 it can have TWRP with Oreo

hello good night I can not enter bootloader mode I always reboot in normal mode the phone, I do it this way c: adb / adb reboot bootloader but I started normal tengop a lg k9 x210em I do not understand the truth any suggestion excuse my English

hello good night I can not enter bootloader mode I always reboot in normal mode the phone, I do it this way c: adb / adb reboot bootloader but I started normal, a lg k9 x210hm I do not understand the truth any suggestion

tazlooney89 said:
hello good night I can not enter bootloader mode I always reboot in normal mode the phone, I do it this way c: adb / adb reboot bootloader but I started normal, a lg k9 x210hm I do not understand the truth any suggestion
Click to expand...
Click to collapse
on my device is the same

Problem!!!
I do what you write in tutorial but my phone dont run on fastboot mode Please HELP!!!

Do we know anything about unbricking these phones? I've got a US Cellular K8+ (LG-X210ULM) that my wife accidentally bricked a while back while trying to flash TWRP (not this particular build, obviously). I think she said everything seemed fine and then on reboot...well, it just never turned on again. PC doesn't pick it up at all, no Qualcomm mode or anything. Based on that, I had assumed it was a lost cause that would take JTAG to bring back, and it may well be...
...but then I noticed something unusual the other day. For the hell of it, I decided to plug it into a charger and let it sit for a while. I got what I expected, which was nothing at all. Oh well. Anyway, I happened to be working with another X210 at the time but only had one battery handy, so I just popped the one out of the "dead" phone without unplugging it and went about with what I was doing. After about 5-10 minutes, something caught my eye - sure enough, the dead phone's screen was now on, displaying the "?" battery screen. I put the battery back into the phone and got unceremoniously dumped straight back to black nothingness. Oh well.
So yeah, the phone still doesn't seem to respond to anything when connected to the PC with no battery, so it's probably a no-go, but the fact that it still shows the no-battery screen tells me it's not quite *as* bricked as I thought it was at least. Any ideas? Are we lucky enough to do a boot-from-SD trick on this phone?

Lmx210cm twrp
Do you happen to have anything for the lmx210cm?

Ausboz said:
Do you happen to have anything for the lmx210cm?
Click to expand...
Click to collapse
Just created a whole EDL firmware for the Aristo 2 aka Phoenix 4. PM me for the links if you'd like a copy. I also found our prog_emmc_firehose_8917_ddr.mbn to flash with (it works)
---------- Post added at 05:16 AM ---------- Previous post was at 05:13 AM ----------
tdawgg777 said:
Hey man thanks for pointing out that this will work with the all cv1 devices... I have the Aristo 2 on Metro... Is it possible to flash twrp while on the official Oreo firmware or do I have to downgrade to Nougat?
Last time I was on xda it was stated that you couldn't flash in fastboot while on official Oreo...
Click to expand...
Click to collapse
I tested oreo and it works file

AustinGarrick1818 said:
Just created a whole EDL firmware for the Aristo 2 aka Phoenix 4. PM me for the links if you'd like a copy. I also found our prog_emmc_firehose_8917_ddr.mbn to flash with (it works)
---------- Post added at 05:16 AM ---------- Previous post was at 05:13 AM ----------
I tested oreo and it works file
Click to expand...
Click to collapse
Hi would mind telling how to flash that firmware amd whats the prog_+++++++ddr.mbn to flash i have aristo 2 android 8.1 metro and i cant do any flash in fastboot or root it anything you know about it will be appreciated so much...

@NonStickAtom785 Any solution to start fastboot mode, the phone? Whenever I try to start it from CMD the phone restarts normally, there is no way to get into fastboot mode.
I already probe manually, with combination of buttons, and it does not work either, the model is the LX210HM

tazlooney89 said:
@NonStickAtom785 Any solution to start fastboot mode, the phone? Whenever I try to start it from CMD the phone restarts normally, there is no way to get into fastboot mode.
I already probe manually, with combination of buttons, and it does not work either, the model is the LX210HM
Click to expand...
Click to collapse
Have you tried installing the Aristo 2 firmware on your phone? In theory these phones have the same build and processors. Also in theory, but proven to work on some other cv1 devices (LG Phoenix 4), you should be able to flash Aristo 2 firmware and unlock your phone that way. I would also check your system.img to see if anything such as a security patch is in place to keep your phone from rebooting to the bootloader. You can backup the system.img manually and send me the img and I will look for anything that different from the Aristo 2 system.img.
Also by backing up the system.img and sending it to me, I can retrieve any "extra" carrier settings and add them to the cv1 img. I'm working on a full stock cv1 firmware img that will work on all the cv1 devices as a root strategy.

I have Lg K9 ( lmx210em ) and it's IMPOSSIBLE enter in fastboot mode, either with key combinations, either with adb command... The phone always boot in normalk mode !!!
Download mode and recowery mode work properly, but fastboot mode DID NOT !!!

urgent
i need the firmware the phoenix 4 please

NonStickAtom785 said:
Compatible Devices:
LG K8+
LG Aristo 2, 2+
LG K9
LG Phoenix 4
Thanks to @AustinGarrick1818 who discovered that this TWRP originally started and developed for the Aristo 2, by @messi2050 and @armandop_, then later updated to the latest version by @tecknight, was able to be flash on the Phoenix 4 leading to the idea that any cv1 device is cable of a ROOT method/TWRP Recovery.
..............
[/COLOR][/SIZE]
Click to expand...
Click to collapse
I'm assuming this will not work on the LG Aristo 2 Verizon PrePaid LM-X210VPP ? Or am i wrong? I have one here in inventory that just needs a new LCD and Digitizer ($20) and I was thinking about fixing it and modding it but worried about Verizon and the bootloader being locked. Have not found a lot of info on this device just yet so debating whether or not to keep / fix or get rid of it.
---------- Post added at 01:24 AM ---------- Previous post was at 01:22 AM ----------
AustinGarrick1818 said:
Just created a whole EDL firmware for the Aristo 2 aka Phoenix 4. PM me for the links if you'd like a copy. I also found our prog_emmc_firehose_8917_ddr.mbn to flash with (it works)
---------- Post added at 05:16 AM ---------- Previous post was at 05:13 AM ----------
I tested oreo and it works file
Click to expand...
Click to collapse
Did anyone get this guys debrick package? And does it have the xml's already created? Either way I would like a copy. If someone can pm me a link to a download or email me it that would be awesome.

i installed twrp and rooted the lmx210cm however now when i boot i shows a black bar at bottom of screen... top of image is cut off and touch screen is unresponsive.... works fine in twrp... what did i do wrong?

jdthomas4181 said:
i installed twrp and rooted the lmx210cm however now when i boot i shows a black bar at bottom of screen... top of image is cut off and touch screen is unresponsive.... works fine in twrp... what did i do wrong?
Click to expand...
Click to collapse
The issue you describe appears to be caused by kernel incompatibilities between certain partitions of the phone.
The fact that TWRP does not have the screen glitching issue implies that the kernel embedded in the TWRP image you flashed IS compatible, but perhaps the kernel within your boot image is NOT.
My first question would be:
You mention that you rooted your phone from fastboot.
Did you:
1. patch the stock boot image on your phone or
2. flash a pre-rooted boot image to your boot partition or
3. Flash a pre rooted ROM to your phone
If you answered #2 or #3, then my secondary question would be:
Specifically which boot image or ROM did you flash to your phone ?
---------- Post added at 08:35 PM ---------- Previous post was at 08:32 PM ----------
noidodroid said:
I'm assuming this will not work on the LG Aristo 2 Verizon PrePaid LM-X210VPP ? Or am i wrong? I have one here in inventory that just needs a new LCD and Digitizer ($20) and I was thinking about fixing it and modding it but worried about Verizon and the bootloader being locked. Have not found a lot of info on this device just yet so debating whether or not to keep / fix or get rid of it.
---------- Post added at 01:24 AM ---------- Previous post was at 01:22 AM ----------
Did anyone get this guys debrick package? And does it have the xml's already created? Either way I would like a copy. If someone can pm me a link to a download or email me it that would be awesome.
Click to expand...
Click to collapse
I did not get the edl package, but I really want it and of course his account is suspended.
Anybody have it ?
Also this method should be capable of working on your phone, as it is a cv1 device.
You may have to downgrade the firmware to Nougat before proceeding if the device is currently running Oreo.
If the device is currently running Oreo or later, you can downgrade the phone to Nougat using the LGUP utility