Database Info

[Q] Bios-Freeze while Androidphone plugged in(USB)

It looks like something is wrong with my BIOS or with Android - During the POST Initalization and while staying in GRUB with an android phone connected over USB my PC freezes(my pc runs fine after i plugg it out) and _sometimes_ when i plug my Phone while using Ubuntu Linux 10.04/Backtrack 4 (Windows 7 runs fine) some USB-Devices stops working (like my mouse).
I have a Nexus one (every Rom shows this error except i use sven killig's USB-Host compatible kernel which seems to turn off Usb-client abilities anyway). Every other PC boots fine and recognize it.
According to lsusb/lshal every other USB-device seems to be recognized except my Nexus one:
Code:
[...USB-Devices...]
Nexus One -> Bus 001 Device 014: ID 18d1:4e12 [Nothing]
[...More USB-Devices...]
And sometimes everything works fine and lshal shows every detail about my phone:
Code:
udi = '/org/freedesktop/Hal/devices/usb_device_18d1_4e12_HT05BP802673'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_608_noserial' (string)
info.product = 'Nexus One' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_18d1_4e12_HT05BP802673' (string)
info.vendor = 'Google, Inc.' (string)
linux.device_file = '/dev/bus/usb/001/010' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3.3' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 551 (0x227) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 10 (0xa) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3.3' (string)
usb_device.max_power = 500 (0x1f4) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 2 (0x2) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'Nexus One' (string)
usb_device.product_id = 19986 (0x4e12) (int)
usb_device.serial = 'HT05BP802673' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Google, Inc.' (string)
usb_device.vendor_id = 6353 (0x18d1) (int)
usb_device.version = 2.0 (2) (double)
I searched to find anyone else with the same error and only found some threads without any [useful] answers(No one got the same Phone or Mainboard and any solution).
I already tried to un/mount the SDcard and enabling/disabling Debugging over USB.
Does someone know how to fix it or has a list of androidcompatible Mainboards?
PS:
MB: Asus M2N-E - Bios ver0802
Phone:
Nexus one:
Android 2.1 EPF30/Modaco Desire Port
Android 2.2 rooted stock FRF85/ rooted stock FRF91/Cyanogen6RC2
and i tried more. ROMs..
I could try other Android phones later
EDIT:
It looks like its a general problem with Android and it is device independent
EDIT2:
After enabling Plug&play option in the BIOS my PC doesn't freeze - but Linux/Windows crashes.
Then I flashed the newest Beta BIOS (v5001) and loaded setup default settings and it boots fine! But my mouse still doesn't work when i connect my Phone - even the LED on the dockingstation doesn't flash when i press the "Reconnect" button.

somthing intresting help unbrick

[PWRAP] pwrap_init_preloader
[PWRAP] pwrap_init
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=0 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=1 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=2 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=3 rdata=5AA5
[PMIC_WRAP]wrap_init pass,the return value=0.
pl pmic init start
pl pmic efuse start
pl pmic efuse BUCK trim
[0x1C8]=0xF802
[0x1CA]=0x807F
[0x20E]=0xE0
[0x260]=0xF0
[0x286]=0xF0
pl pmic efuse end
pl pmic en rst [0x126]=0x13
[0xE]=0x1
[0x540]=0xA0
Battery exist
[0xE]=0x1
[0x540]=0xA0
pl vm read [0x290]=0x50
pl vm set [0x290]=0x52
pl vm check [0x290]=0x52
pl pmic init done
[PLFM] Init I2C: OK(0)
[PLFM] Init PWRAP: OK(0)
[PLFM] Init PMIC: OK(0)
[PLFM] chip[CA00]
[I2C][PL] [i2c0 write] i2c transaction complate
[BLDR] Build Time: 20140218-141828
==== Dump RGU Reg ========
RGU MODE: 75
RGU LENGTH: FFE0
RGU STA: 40000000
RGU INTERVAL: FFF
RGU SWSYSRST: 0
==== Dump RGU Reg End ====
RGU: g_rgu_satus:2
mtk_wdt_mode_config mode value=35, tmp:22000030
PL RGU RST: ??
SW reset with bypass power key flag
Find bypass powerkey flag
mtk_wdt_mode_config mode value=70, tmp:22000071
kpd register for pmic set!
mt_usb_calibraion: input_reg = 0x0
mt_usb_calibraion: term_vref = 0x0, clkref = 0x0, vrt_vref = 0x0,
[RTC] bbpu = 0x5, con = 0x426
[RTC] irqsta = 0x0, pdn1 = 0x0, pdn2 = 0x201, spar0 = 0x40, spar1 = 0x800
[RTC] new_spare0 = 0x0, new_spare1 = 0x1, new_spare2 = 0x1, new_spare3 = 0x1
[RTC] bbpu = 0x5, con = 0x424
SW reset with bypass power key flag
SW reset with bypass power key flag
[PLFM] WDT reboot bypass power key!
p1 pmic read INT_RSV(bit7)[0x138][0x80]
[RTC] rtc_bbpu_power_on done
[SD0] Bus Width: 1
[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)
[SD0] Switch to High-Speed mode!
[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(2) DDR(1) DIV(96) DS(0) RS(0)
[SD0] Bus Width: 8
[SD0] Size: 3696 MB, Max.Speed: 52000 kHz, blklen(512), nblks(7569408), ro(0)
[SD0] Initialized
[SD0] SET_CLK(52000kHz): SCLK(50000kHz) MODE(2) DDR(1) DIV(0) DS(0) RS(0)
msdc_ett_offline_to_pl: size<2> m_id<0x90>
msdc <0> <HYNIX > <H4G1d>
msdc <1> <xxxxxx> <H4G1d>
msdc failed to find
*******EMMC_INFO*******
eMMC partition size(1 block = 512Bytes):
BOOT1:<4096> blocks
BOOT2:<4096> blocks
RPMB :<4096> blocks
GP1 :<0> blocks
GP2 :<0> blocks
GP3 :<0> blocks
GP4 :<0> blocks
USER :<7569408> blocks
*******EMMC_INFO*******
fw id len:1
found:1,i:1
[EMI] DDR2
[EMI] eMMC/NAND ID = 90,1,4A,48,34,47,31,64,4
[EMI] MDL number = 1
[MEM] 1066 MHZ
rank 0 coarse = 15
rank 0 fine = 48
10:| 0 0 1 1 1 0
opt_dle value:8
rank 1 coarse = 15
rank 1 fine = 48
10:| 0 0 1 1 1 0
opt_dle value:8
byte:0, (DQS,DQ)=(8,8)
byte:1, (DQS,DQ)=(8,A)
byte:2, (DQS,DQ)=(8,8)
byte:3, (DQS,DQ)=(8,A)
[EMI] DRAMC calibration passed
[EMI] DQSINCTL:50000
[MEM] complex R/W mem test pass
[PLFM] Init Boot Device: OK(0)
[ROM_INFO] 'v2','0x2700000','0x20000','0x46C0000','0x2C00'
[SEC_K] SML KEY AC = 0
[SEC_K] SBC_PUBK Found
[SEC] AES Legacy : 0
[SEC] SECCFG AC : 1
[SEC] read '0x2700000'
0x41,0x4E,0x44,0x5F,0x53,0x45,0x43,0x43,
[LIB] SecLib.a '20121226-155014'
[LIB] CFG read size '0x4000' '0x1860'
[LIB] Name = SOMC
[LIB] Config = 0x11, 0x11
0x31,0x41,0x35,0x35
0x6F679858
[LIB] HW DEC
0x49494949
[LIB] SEC CFG 'v3' exists
[LIB] Status = 0x43434343
[LIB] ty = 0 , ld = 0
[PART] Image with part header
[PART] name : LK
[PART] addr : FFFFFFFFh
[PART] size : 316772
[PART] magic: 58881688h
[PART] load "UBOOT" from 0x0000000003960200 (dev) to 0x81E00000 (mem) [SUCCESS]
[PART] load speed: 9374KB/s, 316772 bytes, 33ms
[LIB] HW DEC
[SECRO] secroimg '0x41414141'
[SECRO] secroimg '0x35353535'
[SECRO] factory mode enabled
[AUTHEN] rsa.N length = 1024 bytes
[AUTHEN] rsa.E length = 20 bytes
[LIB] Verify 'UBOOT'
0x43434343
[LIB] part load '0x3960000'
[AUTHEN] 0x53,0x53,0x53,0x53
[AUTHEN] verify signature ... pass
[LIB] Verify 'LOGO'
0x43434343
[LIB] part load '0x4D40000'
[AUTHEN] 0x53,0x53,0x53,0x53
[AUTHEN] verify signature ... failed, error is 7
[SECLIB_IMG_VERIFY] Signature Fail.
[LIB] Fail (0x0)
<ASSERT> sec_boot.c:line 181 0
[PLFM] preloader fatal error...
[PLFM] emergency download mode(timeout: 30s).
mtk_arch_reset at pre-loader!
this is console with serial interface
i will post picture with pin layaut

how to unbrick?

botioni said:
[PWRAP] pwrap_init_preloader
[PWRAP] pwrap_init
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=0 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=1 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=2 rdata=5AA5
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=3 rdata=5AA5
[PMIC_WRAP]wrap_init pass,the return value=0.
pl pmic init start
pl pmic efuse start
pl pmic efuse BUCK trim
[0x1C8]=0xF802
[0x1CA]=0x807F
[0x20E]=0xE0
[0x260]=0xF0
[0x286]=0xF0
pl pmic efuse end
pl pmic en rst [0x126]=0x13
[0xE]=0x1
[0x540]=0xA0
Battery exist
[0xE]=0x1
[0x540]=0xA0
pl vm read [0x290]=0x50
pl vm set [0x290]=0x52
pl vm check [0x290]=0x52
pl pmic init done
[PLFM] Init I2C: OK(0)
[PLFM] Init PWRAP: OK(0)
[PLFM] Init PMIC: OK(0)
[PLFM] chip[CA00]
[I2C][PL] [i2c0 write] i2c transaction complate
[BLDR] Build Time: 20140218-141828
==== Dump RGU Reg ========
RGU MODE: 75
RGU LENGTH: FFE0
RGU STA: 40000000
RGU INTERVAL: FFF
RGU SWSYSRST: 0
==== Dump RGU Reg End ====
RGU: g_rgu_satus:2
mtk_wdt_mode_config mode value=35, tmp:22000030
PL RGU RST: ??
SW reset with bypass power key flag
Find bypass powerkey flag
mtk_wdt_mode_config mode value=70, tmp:22000071
kpd register for pmic set!
mt_usb_calibraion: input_reg = 0x0
mt_usb_calibraion: term_vref = 0x0, clkref = 0x0, vrt_vref = 0x0,
[RTC] bbpu = 0x5, con = 0x426
[RTC] irqsta = 0x0, pdn1 = 0x0, pdn2 = 0x201, spar0 = 0x40, spar1 = 0x800
[RTC] new_spare0 = 0x0, new_spare1 = 0x1, new_spare2 = 0x1, new_spare3 = 0x1
[RTC] bbpu = 0x5, con = 0x424
SW reset with bypass power key flag
SW reset with bypass power key flag
[PLFM] WDT reboot bypass power key!
p1 pmic read INT_RSV(bit7)[0x138][0x80]
[RTC] rtc_bbpu_power_on done
[SD0] Bus Width: 1
[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(193) DS(0) RS(0)
[SD0] Switch to High-Speed mode!
[SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(2) DDR(1) DIV(96) DS(0) RS(0)
[SD0] Bus Width: 8
[SD0] Size: 3696 MB, Max.Speed: 52000 kHz, blklen(512), nblks(7569408), ro(0)
[SD0] Initialized
[SD0] SET_CLK(52000kHz): SCLK(50000kHz) MODE(2) DDR(1) DIV(0) DS(0) RS(0)
msdc_ett_offline_to_pl: size<2> m_id<0x90>
msdc <0> <HYNIX > <H4G1d>
msdc <1> <xxxxxx> <H4G1d>
msdc failed to find
*******EMMC_INFO*******
eMMC partition size(1 block = 512Bytes):
BOOT1:<4096> blocks
BOOT2:<4096> blocks
RPMB :<4096> blocks
GP1 :<0> blocks
GP2 :<0> blocks
GP3 :<0> blocks
GP4 :<0> blocks
USER :<7569408> blocks
*******EMMC_INFO*******
fw id len:1
found:1,i:1
[EMI] DDR2
[EMI] eMMC/NAND ID = 90,1,4A,48,34,47,31,64,4
[EMI] MDL number = 1
[MEM] 1066 MHZ
rank 0 coarse = 15
rank 0 fine = 48
10:| 0 0 1 1 1 0
opt_dle value:8
rank 1 coarse = 15
rank 1 fine = 48
10:| 0 0 1 1 1 0
opt_dle value:8
byte:0, (DQS,DQ)=(8,8)
byte:1, (DQS,DQ)=(8,A)
byte:2, (DQS,DQ)=(8,8)
byte:3, (DQS,DQ)=(8,A)
[EMI] DRAMC calibration passed
[EMI] DQSINCTL:50000
[MEM] complex R/W mem test pass
[PLFM] Init Boot Device: OK(0)
[ROM_INFO] 'v2','0x2700000','0x20000','0x46C0000','0x2C00'
[SEC_K] SML KEY AC = 0
[SEC_K] SBC_PUBK Found
[SEC] AES Legacy : 0
[SEC] SECCFG AC : 1
[SEC] read '0x2700000'
0x41,0x4E,0x44,0x5F,0x53,0x45,0x43,0x43,
[LIB] SecLib.a '20121226-155014'
[LIB] CFG read size '0x4000' '0x1860'
[LIB] Name = SOMC
[LIB] Config = 0x11, 0x11
0x31,0x41,0x35,0x35
0x6F679858
[LIB] HW DEC
0x49494949
[LIB] SEC CFG 'v3' exists
[LIB] Status = 0x43434343
[LIB] ty = 0 , ld = 0
[PART] Image with part header
[PART] name : LK
[PART] addr : FFFFFFFFh
[PART] size : 316772
[PART] magic: 58881688h
[PART] load "UBOOT" from 0x0000000003960200 (dev) to 0x81E00000 (mem) [SUCCESS]
[PART] load speed: 9374KB/s, 316772 bytes, 33ms
[LIB] HW DEC
[SECRO] secroimg '0x41414141'
[SECRO] secroimg '0x35353535'
[SECRO] factory mode enabled
[AUTHEN] rsa.N length = 1024 bytes
[AUTHEN] rsa.E length = 20 bytes
[LIB] Verify 'UBOOT'
0x43434343
[LIB] part load '0x3960000'
[AUTHEN] 0x53,0x53,0x53,0x53
[AUTHEN] verify signature ... pass
[LIB] Verify 'LOGO'
0x43434343
[LIB] part load '0x4D40000'
[AUTHEN] 0x53,0x53,0x53,0x53
[AUTHEN] verify signature ... failed, error is 7
[SECLIB_IMG_VERIFY] Signature Fail.
[LIB] Fail (0x0)
<ASSERT> sec_boot.c:line 181 0
[PLFM] preloader fatal error...
[PLFM] emergency download mode(timeout: 30s).
mtk_arch_reset at pre-loader!
this is console with serial interface
i will post picture with pin layaut
Click to expand...
Click to collapse
how did you check this out?

theonecallednick said:
how did you check this out?
Click to expand...
Click to collapse
I found uart pin on mainboard for debuging .
with serial usb cable pl2303

This is the red light only and unknown hardware found (the unknown hardware is in fact mtk usb vcom driver buth sony version ) if you try sp flash tool for mtk then it comunicates with de phone buth it needs some authentication file.

Help..
I am also having same problem..I falshed wrong rom..
It just shows red led and does not detects by PC...
Were you able to solve the problem..if yes..please help..

botioni said:
[PWRAP] pwrap_init_preloader
[PWRAP] pwrap_init
[PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=0 rdata=5AA5
.........................
this is console with serial interface
i will post picture with pin layaut
Click to expand...
Click to collapse
Samuel Wankhede said:
I am also having same problem..I falshed wrong rom..
It just shows red led and does not detects by PC...
Were you able to solve the problem..if yes..please help..
Click to expand...
Click to collapse
Try the guide given in thread linked below
http://forum.xda-developers.com/showpost.php?p=57614511&postcount=13

Please share uart pinout
Baudrate should be 115200??
Thanks

uart
please share the uart pinout , thanks

HELP!!!!! I NEED TO REINsTALL LINUX ON A TV BOX

Hello all ,
I linked a serial cable to my allwinner a20 based Android Tv box.
It can not pass after the boot logo and next is all what it display in serial console.
Somebody pelase help i need to reisntall linux on it ,if you knwo any u boot keys that i have to press on the uboot serial consoel pelase help.I tryed to press ransom keys but i see nothin.
Here is all i see when it start:
====================================
HELLO! BOOT0 is starting!
boot0 version : 3.0.0
dram size =512
sum=0x9c3bd8cf
src_sum=0x9c3bd8cf
Ready to disable icache.
Jump to secend Boot.
[ 0.133]
U-Boot 2011.09-rc1-dirty (Nov 08 2013 - 11:06:32) Allwinner Technology
[ 0.141]version: 1.1.0
[ 0.144]pmbus: ready
axp read error
probe axp20x failed
axp_probe error
boot_clock = 912
dcdc2_vol = 1400
axp set dcdc2_vol to 1400 failed
dcdc3_vol = 1250
ldo2_vol = 3000
ldo3_vol = 2800
ldo4_vol = 2800
power_start = 0
storage_type = -1
usb_recovery = 0
find power_sply to end
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[ 0.293]DRAM: 512 MiB
relocation Offset is: 15b27000
user_gpio config
user_gpio ok
DRV_DISP_Init: opened
[ 0.560]boot_disp.output_type=2
[ 0.563]boot_disp.output_mode=5
[ 0.567]boot_disp.auto_hpd=1
workmode = 0
[ 1.871]NAND: NAND_UbootInit
NB1 : enter NAND_LogicInit
nand : get id_number_ctl from script, 3
not burn nand partition table!
NB1 : nftl num: 3
init nftl: 0
NB1 : NAND_LogicInit ok, result = 0x0
[ 2.381]sunxi flash init ok
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:12-
-name- -start- -size-
bootloader : 1000000 1000000
env : 2000000 1000000
boot : 3000000 1000000
system : 4000000 20000000
recovery : 24000000 2000000
databk : 26000000 2000000
misc : 28000000 1000000
private : 29000000 1000000
sysrecovery : 2a000000 21000000
data : 4b000000 40000000
cache : 8b000000 17000000
UDISK : a2000000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
recovery key high 6, low 4
cant find fstbt value
Fastboot detected, will boot fastboot
to be run cmd=run setargs_nand boot_fastboot
the user data'magic is bad
WORK_MODE_BOOT
board_status_probe
sunxi_bmp_display
WORK_MODE_BOOT
[ 2.509]Hit any key to stop autoboot: 0
run usb fastboot
sunxi_fastboot_init
recv addr 0x41000000
send addr 0x582580a8
delay time 0
usb init ok
------------------------------------------------------------------
After this nothing .Please help me

After searching all google and reading documantation ,I contacted the box seller and he gied me the files i neeeded.
I used a image file named sun7i_A20v2.0_android_sugar-ref001_2014.09.04_TakenYBSJ.img and a windwos software to flash it via usb named PhoenixPacketV333
To flash teh device you muist hava a serial console to the box (veru easy to do if you have the cable ) ,and keep pushed the key 2
on serial consle (putty) while powering the device ,so it enter in fel mode ( something like recovery mode ,it accept usb connection) .Then oyu need a usb male to male cable to conect the android tv box usb port to the windows usb port ,and start flasing using the PhoenixPacketV333 software.
If somebody needs more help or files just write here I check daily .
have a nice day all!

S7 edge G935S have bootloader exception, can not start download mode

I have G935S but I run wrong boot to S7 edge use chip Qualcomm now It can not run download mode
This is error now:
bootloader exception
[RST_STAT = 0x1000000]
EVT 1.0
ASV TBL VER = 8, Grace = C
ECT: PARA005i
LOT_ID = N9XZ8
CHIP_ID = 02744f24451c
CHIP_ID2 = 0000000
MNGS: 45'C APOLLO:44'C 63D:45'C ISP:46'C
Exception: do_handler_sync: UNKNOW(esr: 0x2000000)
@@
pc: 0x00150000 lr:0x8f009358 sp:0x8f113f50 @@
Click to expand...
Click to collapse
Please help me go to download mode or how to up stock rom for it, thanks

Have you had any luck? I've done the same thing tonight

You'll get better replies in the S7 Edge forums, these are S7 flat
http://forum.xda-developers.com/s7-edge

[Help] Bootloader Exception

Bootloader exception
[ RST_STAT = 0x10000000 ]
EVT 1.0
ASV TBL VER 8, Grade = C
ECT : PARA005i
LOT_ID = NA46A
CHIP_ID = 02b62e48b99c
CHIP_ID2 = 00000000
MNGS:40'C APOLLO:40'C G3D:40'C ISP:41'C
Exception: do_handler_serror: SERROR(esr: 0xbf000000) 'a WB }
pc : 0x8f0132cc [r : 0x8f022 dbc sp : 0x8f10fe90 @
@ _
I've tried going into download mode but it isn't working.
Please Help!!
The computer doesn't recognize it either.. if anyone has any info please help me!