Database Info

twrp & Root & Mod for Ulefone Mix

Support page for ulefone Mix User-
we Need Some files to Root Ulefone Mix.
1. SP flash tools- https://spflashtool.com/
2. twrp Recovery- https://romprovider.com/2017/11/ulefone-support-twrp/
3. SuperSU- https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
other Support File-
Official Firmware- mod edit - link removed
no-verity-opt-encrypt-5.1.zip - https://androidfilehost.com/?fid=673368273298927206
Instructions-
First of all Flash twrp using SP flash tool
Don't Switch on phone flash no-verity-opt-encrypt-5.1.zip
then flash SuperSu.zip
Reboot System Now.

Is the 1st step not disabling oem lock in developer settings?

HypoTurtle said:
Is the 1st step not disabling oem lock in developer settings?
Click to expand...
Click to collapse
you can unlock with fastboot-
For new devices (2015 and later):
Code:
fastboot flashing unlock
For older devices (2014 and earlier):
Code:
fastboot oem unlock

XN Logos said:
you can unlock with fastboot-
For new devices (2015 and later):
For older devices (2014 and earlier):
Click to expand...
Click to collapse
For some reason no need to oem unlock (bootloader not locked properly??) so have twrp without needing to wipe data, but now remains the encryption problem as this trwp doesn't support it, I have compiled twrp for mtk in the past with encryption support but doubt I can recall what needed to be done

TWRP not working
When I install the TWRP recovery and start the phone with this mode to install the two files
1) no-verity-opt-encrypt-5.1
2) SuperSU-v2.82-201705271822
the phone does not see them and it is impossible to proceed further.
Furthermore, the operating system does not even start, so the original firmware must be replaced with the flash tool.
Has anyone found a solution to this inconvenience?
Thank you

mingariedd said:
When I install the TWRP recovery and start the phone with this mode to install the two files
1) no-verity-opt-encrypt-5.1
2) SuperSU-v2.82-201705271822
the phone does not see them and it is impossible to proceed further.
Furthermore, the operating system does not even start, so the original firmware must be replaced with the flash tool.
Has anyone found a solution to this inconvenience?
Thank you
Click to expand...
Click to collapse
1. Userdata is encrypted, and the TWRP here isn't compiled to be able to decrypt it. So you'll need an sdcard with those zips on it
2. The os won't start if it deems its been altered - that's partly what zip 1 is for.

Is there any custom roms for Ulefone Mix?

Qaaqqu said:
Is there any custom roms for Ulefone Mix?
Click to expand...
Click to collapse
No custom ROMs - I think there is a clone device [Panasonic Eluga C] so we have another stock ROM from them.
I haven't attempted porting anything yet, let alone building anything from source [a source built twrp should be trivial] - i've lost yet another hard-drive recently so light on diskspace & sdcards so not able to do much atm.
For completeness: stock ROM > http://ulefone.com/download/mix.html [newer than the one on needrom]
OTA > http://hwfotadown.mayitek.com/ota/r...NE_N_V0.6.9.1_S1712221514261911507/update.zip

Is this root method working?
Stock rom is located here Stock Ulefone Mix 4G Rom

when (android 8) Oreo for ulefone mix?

twrp and now?
Hello,
i have an old ulefone mix mt6750t with the screen damaged but still 90% working, i thought i would use it on android auto but i needed rooting.
So I informed myself a bit, go unlocked developer mode and usb, downloaded adb and twrp and magisk etc ...
I unlocked the bootloader from the settings then used adb and installed twrp which starts but asks me for the pass to decrypt, then I swipe and delete the encrypted data.
Then with adb sideload I install magisk 20 and check opt encript, but the phone always goes to twrp, it does not restart ... mmm and the orange mode message comes out but it should be normal ... someone knows how to go on to restart it normally and not with twrp?
Thank you

Huawei Mediapad M5 TWRP test

Attention ! ONLY for devices delivered with OREO 8.0.xxx. At 8.1.xxx there are problems!
This TWRP has been made for the P10.
On my Mediapad M5 10.8" LTE it works!
It can be safely used IF
- you have a FULL update of your build on the PC
- from the Update.zip the Update.app have unzipped
- with the HuaweiExtractor from the Upate.app
- - ramdisk.img
- - recovery_ramdis.img
- - system.img
extracted. The Extractor automatically makes a *.img.header for each *.img. These 6 files copy in yours
ADB-Folder. IF ANYTHING SHOULD WORK - flash this 3 img
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
AND the pad is reset to stock-rom again.
If you can handle it, you need a TWRP and want to test it
https://forum.xda-developers.com/p10/development/recovery-twrp-3-2-1-0-emui-8-0-4-04-2018-t3773449
download
- fastboot flash recovery_ramdisk twrp.img
If this works on a Mediapad M5 8 " ? I can not test it because of the lack of a device!
Who has no idea as a beginner: PLEASE LET IT BE !!!
Turning € 400 into a paperweight is NOT fun!
Absolutely important: look at the screen before flashing - "Bootloader: unlocked" & "FRP: unlock" !!!
With stock-rom OTA updates can still be received BUT only be installed with stock-recovery !!!
If the update is on the pad "Update now?" NO later !
- fastboot flash recovery_ramdisk recovery_ramdis.img
Now install the update
Should the update "*****ing" helps https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085
This is flashed instead of stock recovery.
When everything is done, you can install TWRP afterwards.

This did not work for me on an SHT-AL09 that I had already bricked (soft bricked as I can flash via fastboot). The TWRP screen came up at boot, but the menu never loaded. I couldn't say for sure that it wouldn't work on a stock SHT-AL09.

I can confirm this version of TWRP is working on my Mediapad M5 8.4 SHT-W09. Thanks for trying, it out. I wasn't brave enough to be the first.

i am write what i do with my pad. My Pad : Huawei Mediapad M5 - CMR-AL09 8.0.0.151(C432).
other type (example : SHT-AL09, SHT-W09 ....) i not have !
if this writing other user help - that's ok

@AndDiSa @rcstar6696 @MishaalRahman

@tabletmen I am already looking at it ... the only thing I do not like much: only a binary download from Mega
I would prefer to have the sources to build it by my own.

AndDiSa said:
@tabletmen I am already looking at it ... the only thing I do not like much: only a binary download from Mega
I would prefer to have the sources to build it by my own.
Click to expand...
Click to collapse
The developers Github page is here
https://github.com/pretoriano80

@darren1 thanks, I've found it already ... but I need to dig in a bit deeper to get a twrp environment set up.

@darren1 I can confirm that the twrp for the P10 is working (partly) on the SHT-W09 ... It boots, it decrypts /data and you can access via adb
I didn't try to install anything but I tried to do a backup ... unfortunately neither "adb backup --twrp" nor backup to the sdcard is working for me

AndDiSa said:
@darren1 I can confirm that the twrp for the P10 is working (partly) on the SHT-W09 ... It boots, it decrypts /data and you can access via adb
I didn't try to install anything but I tried to do a backup ... unfortunately neither "adb backup --twrp" nor backup to the sdcard is working for me
Click to expand...
Click to collapse
I was able to make a complete backup to the sdcard on my CMR-W09 and then restore from it. I did remove pin & fingerprint screenlock prior to booting into twrp. Installing zip files works.

@magnumlove that's strange .. I didn't remove the pattern for unlocking, but the backup went well for /data the error occured when backing up /system
Probably I should try it again with a different sdcard.
(btw. adb backup --twrp failed due to /system/bin/bu missing)

tabletmen said:
@AndDiSa @rcstar6696 @MishaalRahman
Click to expand...
Click to collapse
you won't need twrp at all for any custom rom for our m5
its simply useless becazse you have to flash system images via fastboot
has anyone tested this on gsi ?

rcstar6696 said:
you won't need twrp at all for any custom rom for our m5
its simply useless becazse you have to flash system images via fastboot
has anyone tested this on gsi ?
Click to expand...
Click to collapse
I am just about to flash v19 of Phh-Treble gsi. I will let you know how I get on.

@rcstar6696 I like the idea to have a full backup to be able later to restore to a certain stage. This is the main reason for me to have twrp.
Btw. I found another issue with the TWRP from P10: OTG is not working. I wanted to use a pen drive to test the backup but it's not even mounting the drive.

rcstar6696 said:
you won't need twrp at all for any custom rom for our m5
its simply useless becazse you have to flash system images via fastboot
has anyone tested this on gsi ?
Click to expand...
Click to collapse
I managed to flash the gsi image fine, just need to install img rather than zip.
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/

rcstar6696 said:
you won't need twrp at all for any custom rom for our m5
its simply useless becazse you have to flash system images via fastboot
has anyone tested this on gsi ?
Click to expand...
Click to collapse
Is there some other easy way to flash GApps and other similar zips without TWRP?
Sent from my CMR-AL09 using Tapatalk

The recovery works on the stock ROM SHT-L09 .125(C00). At least for me it doesn't work with either of phh's latest(v19) GSI images; just stays on twrp logo screen. I am unable to get a logcat as that returns an error but can get a shell.

fargonaz said:
The recovery works on the stock ROM SHT-L09 .125(C00). At least for me it doesn't work with either of phh's latest(v19) GSI images; just says on twrp logo screen. I am unable to get a logcat as that returns an error but can get a shell.
Click to expand...
Click to collapse
Did you flash the gsi img file to System Image?

darren1 said:
Did you flash the gsi img file to System Image?
Click to expand...
Click to collapse
Yes, unzipped with 7zip and flashed to system partition. I tried with vanilla also.
Recovery is nice, but GSI v19 in nicer. It will come.

fargonaz said:
Yes, unzipped with 7zip and flashed to system partition. I tried with vanilla also.
Recovery is nice, but GSI v19 in nicer. It will come.
Click to expand...
Click to collapse
I flashed to System Image not System.

[ROM][STOCK][TWRP][27/06/18]TA-1060 Stock Oreo 8.1

Code:
Warning! any damage done to your device is not my fault, use at your own risk!
This zip should be used mainly if you wiped system for some reason and didn't back up, its TA-1060 May patch system image + kernel + vendor files
Unlocked bootloader required!
TWRP
1. Boot into TWRP
2. Format /data partition in TWRP
3. Use 'adb push ta_1060_oreo_may_18.zip /sdcard/' in windows/linux/mac
4. Go to sdcard in TWRP and flash ta_1060_oreo_may_18.zip
5. Reboot to bootloader
6. use 'fastboot flash recovery recovery.bin' (Link bellow)
7. Optional: fastboot oem lock
8. reboot
9. on boot you will get encryption, click on the reset button when android loads
10. You will reboot into recovery then back into system, done
Fastboot
1. Extract zip file
2. flash system.img, boot.img, vendor.img in fastboot
3. fastboot reboot
Links:
Stock ROM zip May
Recovery image
Good luck
XDA:DevDB Information
[ROM][STOCK][TWRP][27/06/18]TA-1060 Stock Oreo 8.1, ROM for the Nokia 1
Contributors
sooti
ROM OS Version: 8.x Oreo
Version Information
Status: Stable
Created 2018-06-27
Last Updated 2018-06-27

So we can flash either through TWRP or Fastboot right?

Zeenat11 said:
So we can flash either through TWRP or Fastboot right?
Click to expand...
Click to collapse
I haven't tested fastboot but it should work. TWRP works 100%

Thank you very much, you are a life saver!!
I was stuck in a TWRP loop.
I tried flashing through TWRP but it didn't work but the fastboot method worked like a charm!
My phone is running again.

Thank you very much.
Is there any userdata.img available?

alexstarc said:
Thank you very much.
Is there any userdata.img available?
Click to expand...
Click to collapse
Nope but do you really need it? just format in fastboot or TWRP.

sooti said:
Nope but do you really need it? just format in fastboot or TWRP.
Click to expand...
Click to collapse
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.

alexstarc said:
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
Click to expand...
Click to collapse
I wrote in the instructions...
If you get a password just enter a random one, then it will ask you to wipe the device, click ok and it will reboot to recovery and then wipe userdata and boot fine.
just make sure you flash the recovery.bin and not twrp before you wipe

alexstarc said:
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
Click to expand...
Click to collapse
Same happened to me. I solved it by a hard reset via the stock recovery.
Make sure you flash the recovery.bin like Sooti said.
Wiping through twrp doesn't work.

Nice, working twrp for Nokia 1.
I buyed this phone today. Waiting for customs

A little warning.
It looks like the recovery.bin I took from another nokia 1 device doesn't match the checksum check which causes a failed during ota updates, please only flash this rom if you soft bricked your device.
If anyone can get me TA-1060 stock recovery image that should solve it. for now you can't update the phone until a fix is found

I have Nokia Ta 1066. Will this rom work on mine? Also I read somewhere Ta 1060 is single sim variant. What about the second sim?
Has anyone with TA 1066 tried it?

Thanks. Both methods work fine. Don't ask how I found out.....

Can you share how you managed to backup stock recovery file. Maybe after all the steps above we can flash our own device recovery to make ota work again...

coolboyforeva said:
Can you share how you managed to backup stock recovery file. Maybe after all the steps above we can flash our own device recovery to make ota work again...
Click to expand...
Click to collapse
I don't have stock recovery from our device i have from another variant of Nokia 1

Hey guys i have a TA-1056 and after unlocking bootloader and flashing TWRP it booted to recovery and came up encrypted, after looking around the only solution was to format data, afterwards when rebooting it always boots to recovery, i tried flashing this zip and i get the same issue and i can't find the stock ROM for the 1056 anywhere online, can anyone help me out? i really appreciate it

Kurajmo said:
Nice, working twrp for Nokia 1.
I buyed this phone today. Waiting for customs
Click to expand...
Click to collapse
got any custom roms?

Does Nokia 1 support DT2W?

Sir, is that possible to get a stock rom of TA 1056 ?
I have searched everywhere but whole thing available over net just left my phone bricked. All i need is a working rom source. Even if that’s a custom rom too to flash via sp flash tool. Thanks in advance

Can any please repost the firmware , the link isn't working

[Guide] Flash Custom Rom (xiaomi.eu) and install Magisk On mi note 10 lite

Follow These methods (100% worked)
1. Boot to fastboot mode (power +vol down)
2. Extract ADB.rar to Drive C (Put the recovery and vbmeta files in ADB Folder) vbmeta link Below
3. Connect Phone To PC with USB Cable
4. from Start run CMD and type cd:\adb (pres enter) And type the following Commands :
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash recovery Twrp-3.4.2B_toco_by.alex.msk1407.img (you can rename it to twrp.img) -LINK BELOW (Many Thanks To Alex msk)
fastboot reboot recovery
5. in twrp: wipe-> format data -> Type yes and tap enter (blue key)
6. Copy xiaomi.eu rom and magisk.zip to phone
8. in twrp: install rom and magisk.zip
9. in twrp: Boot to recovery (the phone is restarting to twrp again)
10. in twrp: reboot system
12. Enjoy
ADB Link :
https://mega.nz/file/x8whTZSa#UP7UvnDO7rsuefBWb1meUd4iZZXMJBHIDUa1lMnQXNI
TWRP Link :
https://mega.nz/file/0lAywALA#hx6U3_xgW3fpndSR0OWsRBxEncQ9CGQb2ezMOAldTRQ
3.4.0-14 TWRP Link:
https://forum.xda-developers.com/mi...overy-unofficial-twrp-xiaomi-mi-note-t4107209
vbmeta Link:
https://mega.nz/file/t4QmXACT#hqN6TNDt2mlAPrQUnClGtmaCvWJR3eO3TRAa8I4JhGk
Magisk Link :
https://mega.nz/file/Y4BEBILD#kre2gRvSJgwJRto1Yg-o7gblTRXAftUGxJSoKNowWkI
xiaomi.eu 12.0.3 Rom Link (Updated):
https://sourceforge.net/projects/xi...e10LITE_V12.0.3.0.QFNMIXM_v12-10.zip/download

thank

thanks and good to see, that the mi note 10 lite has it own section now. hope there will come a lot of custom things.

Does Gpay work with bootloader unlocked and xiaomi.eu rom?

is the widevine L1 working?
is the hdr working

For installing updates, do we need to follow the dirty flash process via TWRP? I tried via the updater but the process simply restarts mobile and nothing happens.

New version of Xiaomi.eu ROM is out.
Question is how to updtae without losing data?

What's the problem? The test TWRP from mauronofrio can't decrypt data? Sry for the questions, I have not tested it yet

eugenwollekneul said:
What's the problem? The test TWRP from mauronofrio can't decrypt data? Sry for the questions, I have not tested it yet
Click to expand...
Click to collapse
Yes, cant decrypt -> probably can't update.
Even if you do use OTG to read the .zip...
Will it overwrite to encrypted partitions? Won't that break the system?
Or
Will it boot fine - but will the updated ROM be able to read the probably still encrypted user data?

maxlieb said:
Yes, cant decrypt -> probably can't update.
Even if you do use OTG to read the .zip...
Will it overwrite to encrypted partitions? Won't that break the system?
Or
Will it boot fine - but will the updated ROM be able to read the probably still encrypted user data?
Click to expand...
Click to collapse
I have a Redmi note 8 with xiaomi.eu but I think I can help you. In order to update you flash the new zip. It just overwrites the system partition not the data. And you are still able to decrypt them. There is no problem I tried it. You will have to reflash magisk although.But in case anything goes wrong just format data and you will be fine.

PinkNinja said:
I have a Redmi note 8 with xiaomi.eu but I think I can help you. In order to update you flash the new zip. It just overwrites the system partition not the data. And you are still able to decrypt them. There is no problem I tried it. You will have to reflash magisk although.But in case anything goes wrong just format data and you will be fine.
Click to expand...
Click to collapse
There`s a new twrp that decrypts everything so no more problem anyway

is this twrp fully working? or does it have the same problems as mauronofrio's Twrp 3.3.1.0?

Ahmed Hesham said:
is this twrp fully working? or does it have the same problems as mauronofrio's Twrp 3.3.1.0?
Click to expand...
Click to collapse
Yes it's fully working.
Στάλθηκε από το Mi Note 10 Lite μου χρησιμοποιώντας Tapatalk

Super weird... it didnt work for me... flashing was successful
but it keeps rebooting to fastboot mode.
While doing format data, i did receive an error message "unable to find /metadata" is that normal?
EDIT: So what happen is, I did all over again with slightly different steps
1) i reflashed official firmware to revive my phone
2) Once I'm able to boot on official ROM, I flash TWRP
3) Format Data + restart TWRP
4) Copied ROM and flash Xiaomi EU rom
5) Restart to system immediately after flashing ROM. Managed to boot Xiaomi EU rom.
6) Reboot to recovery and flash magisk
7) Restart to system, set up, and done.

Kediraksith said:
1) i reflashed official firmware to revive my phone
Click to expand...
Click to collapse
How you reflas official firmware?

andriej1974 said:
How you reflas official firmware?
Click to expand...
Click to collapse
I think he did it with the miflash tool. I had to do it so because I stucked in Fastboot mode.

I also had a problem with metadata. I have recovery aleks.msk, can enter fastboot but nothing else. Miflash does not work, uploading the firmware via recovery does not get up.

In fastboot mode copy latest xiaomi.eu zip (not the fastboot, the regular one)to the phone and flash it in twrp - reboot to system

Can anyone please post a link to Xiomi EU ROM. Can't find it. Thanks

RAMBO29 said:
Can anyone please post a link to Xiomi EU ROM. Can't find it. Thanks
Click to expand...
Click to collapse
In the First Post

Can't Boot to twrp recovery (just displying twrp logo)

Hi guys,
just received from my sister a oneplus 6 and i tried to flash a new custom rom after updating the system. I was following the guide posted on these forum but, when i tried to boot from fastboot to twrp it just display endless the twrp logo. I tried to boot with an older twrp or blu spark but nothing, they all make QUALCOMM crashdump, just the latest never go past the twrp logo. Tried to search for someone with a similar problem but i couldnt find anything about my same problem. Thanks in advance.

Enossob said:
Hi guys,
just received from my sister a oneplus 6 and i tried to flash a new custom rom after updating the system. I was following the guide posted on these forum but, when i tried to boot from fastboot to twrp it just display endless the twrp logo. I tried to boot with an older twrp or blu spark but nothing, they all make QUALCOMM crashdump, just the latest never go past the twrp logo. Tried to search for someone with a similar problem but i couldnt find anything about my same problem. Thanks in advance.
Click to expand...
Click to collapse
Which android version are you? 9 10 11?

1. Unlock Bootloader (if is already unlocked, skip this step)
2. download platform tools and unpack
3. copy twrp img and installer zip to platform tools folder location
4. open cmd
5. reboot phone to bootloader
6. write in cmd fastboot erase userdata
7. then write fastboot boot twrp-file-image-name.img
8. twrp is booted, go to advanced and choos option Flash current twrp
9. if is done, then reboot to recovery
10. go to wipe option, choose format data and type yes
11. now you can flash rom using rom flashing instructions
12. remember, after done rom flashing, FLASH twrp installer

@Noob9496 hey dude thanks, i found Someone who had my same problem and I resolved too with fastboot erase userdata so I could had finally boot into twrp cause that was my main problem.
@croperas yeah that was the problem too, cause when I had finally my sweet rom, syberia os (the only android 12 available atm for op6) I tried to go back to the recovery but can't, tried reinstall everything but I couldn't so after some research couldn't find anything, but anyone who had problems with recovery almost always had problems with incompatible versions (like twrp for android 10 but had android 11) so I then realized it isn't still available a custom recovery for android 12 for op6. So after erasing everything its all fine. Thanks a lot guys really appreciated.

Enossob said:
@Noob9496 hey dude thanks, i found Someone who had my same problem and I resolved too with fastboot erase userdata so I could had finally boot into twrp cause that was my main problem.
@croperas yeah that was the problem too, cause when I had finally my sweet rom, syberia os (the only android 12 available atm for op6) I tried to go back to the recovery but can't, tried reinstall everything but I couldn't so after some research couldn't find anything, but anyone who had problems with recovery almost always had problems with incompatible versions (like twrp for android 10 but had android 11) so I then realized it isn't still available a custom recovery for android 12 for op6. So after erasing everything its all fine. Thanks a lot guys really appreciated.
Click to expand...
Click to collapse
Glad it worked out for you

Noob9496 said:
1. Unlock Bootloader (if is already unlocked, skip this step)
2. download platform tools and unpack
3. copy twrp img and installer zip to platform tools folder location
4. open cmd
5. reboot phone to bootloader
6. write in cmd fastboot erase userdata
7. then write fastboot boot twrp-file-image-name.img
8. twrp is booted, go to advanced and choos option Flash current twrp
9. if is done, then reboot to recovery
10. go to wipe option, choose format data and type yes
11. now you can flash rom using rom flashing instructions
12. remember, after done rom flashing, FLASH twrp installer
Click to expand...
Click to collapse
Enossob said:
@Noob9496 hey dude thanks, i found Someone who had my same problem and I resolved too with fastboot erase userdata so I could had finally boot into twrp cause that was my main problem.
@croperas yeah that was the problem too, cause when I had finally my sweet rom, syberia os (the only android 12 available atm for op6) I tried to go back to the recovery but can't, tried reinstall everything but I couldn't so after some research couldn't find anything, but anyone who had problems with recovery almost always had problems with incompatible versions (like twrp for android 10 but had android 11) so I then realized it isn't still available a custom recovery for android 12 for op6. So after erasing everything its all fine. Thanks a lot guys really appreciated.
Click to expand...
Click to collapse
I have the same problem after flashing OO 11.1.2.2. I made a mistake flashing the wrong patched image to get rooted again but doing this I lost the access to twrp and now there is no recovery anymore. If I try to boot into any older version of twrp I receive a crashdump, if I try to boot to twrp 3.6.0 it gets stuck to logo. If I use the command "fastboot erase userdata" do I lose something?

tenderloin83 said:
I have the same problem after flashing OO 11.1.2.2. I made a mistake flashing the wrong patched image to get rooted again but doing this I lost the access to twrp and now there is no recovery anymore. If I try to boot into any older version of twrp I receive a crashdump, if I try to boot to twrp 3.6.0 it gets stuck to logo. If I use the command "fastboot erase userdata" do I lose something?
Click to expand...
Click to collapse
Yeah, everything

Enossob said:
Yeah, everything
Click to expand...
Click to collapse
Is there another way to restore twrp?

I don't use twrp anymore. Attached is Magisk patched boot for OP6 11.1.2.2 I patched from the latest payload.
fastboot flash boot_a magisk_patched-23000_OP6_11.1.2.2.img
fastboot flash boot_b magisk_patched-23000_OP6_11.1.2.2.img

tenderloin83 said:
Is there another way to restore twrp?
Click to expand...
Click to collapse
Install the twrp installer directly from magisk

What I did was trying to install Lineage OS 18.1 (the latest nightly from Jan 11 2022) with Lineage OS Recovery. Following the official wiki I always got stuck in the lineage os boot animation. Never got past that. Tried to fastboot boot twrp.img but TWRP stuck on logo. I think I never tried to boot twrp with the userdata erased. I think I will try it.

Anyone trying to install the twrp, check out SHRP recovery for OP6/t. Boot the img and flash the zip from that thread. tested works with both OP6 and OP6t in OOS 11.1.2.2.