Attention ! ONLY for devices delivered with OREO 8.0.xxx. At 8.1.xxx there are problems!
This TWRP has been made for the P10.
On my Mediapad M5 10.8" LTE it works!
It can be safely used IF
- you have a FULL update of your build on the PC
- from the Update.zip the Update.app have unzipped
- with the HuaweiExtractor from the Upate.app
- - ramdisk.img
- - recovery_ramdis.img
- - system.img
extracted. The Extractor automatically makes a *.img.header for each *.img. These 6 files copy in yours
ADB-Folder. IF ANYTHING SHOULD WORK - flash this 3 img
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
AND the pad is reset to stock-rom again.
If you can handle it, you need a TWRP and want to test it
https://forum.xda-developers.com/p10/development/recovery-twrp-3-2-1-0-emui-8-0-4-04-2018-t3773449
download
- fastboot flash recovery_ramdisk twrp.img
If this works on a Mediapad M5 8 " ? I can not test it because of the lack of a device!
Who has no idea as a beginner: PLEASE LET IT BE !!!
Turning € 400 into a paperweight is NOT fun!
Absolutely important: look at the screen before flashing - "Bootloader: unlocked" & "FRP: unlock" !!!
With stock-rom OTA updates can still be received BUT only be installed with stock-recovery !!!
If the update is on the pad "Update now?" NO later !
- fastboot flash recovery_ramdisk recovery_ramdis.img
Now install the update
Should the update "*****ing" helps https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085
This is flashed instead of stock recovery.
When everything is done, you can install TWRP afterwards.
This did not work for me on an SHT-AL09 that I had already bricked (soft bricked as I can flash via fastboot). The TWRP screen came up at boot, but the menu never loaded. I couldn't say for sure that it wouldn't work on a stock SHT-AL09.
I can confirm this version of TWRP is working on my Mediapad M5 8.4 SHT-W09. Thanks for trying, it out. I wasn't brave enough to be the first.
i am write what i do with my pad. My Pad : Huawei Mediapad M5 - CMR-AL09 8.0.0.151(C432).
other type (example : SHT-AL09, SHT-W09 ....) i not have !
if this writing other user help - that's ok
@AndDiSa @rcstar6696 @MishaalRahman
@tabletmen I am already looking at it ... the only thing I do not like much: only a binary download from Mega
I would prefer to have the sources to build it by my own.
AndDiSa said:
@tabletmen I am already looking at it ... the only thing I do not like much: only a binary download from Mega
I would prefer to have the sources to build it by my own.
Click to expand...
Click to collapse
The developers Github page is here
https://github.com/pretoriano80
@darren1 thanks, I've found it already ... but I need to dig in a bit deeper to get a twrp environment set up.
@darren1 I can confirm that the twrp for the P10 is working (partly) on the SHT-W09 ... It boots, it decrypts /data and you can access via adb
I didn't try to install anything but I tried to do a backup ... unfortunately neither "adb backup --twrp" nor backup to the sdcard is working for me
AndDiSa said:
@darren1 I can confirm that the twrp for the P10 is working (partly) on the SHT-W09 ... It boots, it decrypts /data and you can access via adb
I didn't try to install anything but I tried to do a backup ... unfortunately neither "adb backup --twrp" nor backup to the sdcard is working for me
Click to expand...
Click to collapse
I was able to make a complete backup to the sdcard on my CMR-W09 and then restore from it. I did remove pin & fingerprint screenlock prior to booting into twrp. Installing zip files works.
@magnumlove that's strange .. I didn't remove the pattern for unlocking, but the backup went well for /data the error occured when backing up /system
Probably I should try it again with a different sdcard.
(btw. adb backup --twrp failed due to /system/bin/bu missing)
tabletmen said:
@AndDiSa @rcstar6696 @MishaalRahman
Click to expand...
Click to collapse
you won't need twrp at all for any custom rom for our m5
its simply useless becazse you have to flash system images via fastboot
has anyone tested this on gsi ?
rcstar6696 said:
you won't need twrp at all for any custom rom for our m5
its simply useless becazse you have to flash system images via fastboot
has anyone tested this on gsi ?
Click to expand...
Click to collapse
I am just about to flash v19 of Phh-Treble gsi. I will let you know how I get on.
@rcstar6696 I like the idea to have a full backup to be able later to restore to a certain stage. This is the main reason for me to have twrp.
Btw. I found another issue with the TWRP from P10: OTG is not working. I wanted to use a pen drive to test the backup but it's not even mounting the drive.
rcstar6696 said:
you won't need twrp at all for any custom rom for our m5
its simply useless becazse you have to flash system images via fastboot
has anyone tested this on gsi ?
Click to expand...
Click to collapse
I managed to flash the gsi image fine, just need to install img rather than zip.
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
rcstar6696 said:
you won't need twrp at all for any custom rom for our m5
its simply useless becazse you have to flash system images via fastboot
has anyone tested this on gsi ?
Click to expand...
Click to collapse
Is there some other easy way to flash GApps and other similar zips without TWRP?
Sent from my CMR-AL09 using Tapatalk
The recovery works on the stock ROM SHT-L09 .125(C00). At least for me it doesn't work with either of phh's latest(v19) GSI images; just stays on twrp logo screen. I am unable to get a logcat as that returns an error but can get a shell.
fargonaz said:
The recovery works on the stock ROM SHT-L09 .125(C00). At least for me it doesn't work with either of phh's latest(v19) GSI images; just says on twrp logo screen. I am unable to get a logcat as that returns an error but can get a shell.
Click to expand...
Click to collapse
Did you flash the gsi img file to System Image?
darren1 said:
Did you flash the gsi img file to System Image?
Click to expand...
Click to collapse
Yes, unzipped with 7zip and flashed to system partition. I tried with vanilla also.
Recovery is nice, but GSI v19 in nicer. It will come.
fargonaz said:
Yes, unzipped with 7zip and flashed to system partition. I tried with vanilla also.
Recovery is nice, but GSI v19 in nicer. It will come.
Click to expand...
Click to collapse
I flashed to System Image not System.
Related
good morning,
(escuse me for my english I am french,thank google)
I was passing by Rom KangVIP B015 (Android 5.0) and TWRP TWRP-ENG-5.0,
I was the original B003 702L, all works very well for several days,
I decided to make another backup with TWRP (with compression) externally on my sd,
all goes normally, and I then reboot,
and continually find myself on the recovery TWRP menu.
Can not start the system by download from TWRP.
I restored my backup but always the same.
I can put myself in download from the connected computer,
and I have access to the adb command.
by searching the internet, the problem has already produced on LG2 and other,
and there would execute commands either by download or in TWRP in terminal mode.
but I do not know if that works under the MediaPad x2,
and knows the commands to perform.
thank you in advance to all those who have the solution to this problem
Did you try to Factory reset/Wipe your phone from recovery?
hagba said:
Did you try to Factory reset/Wipe your phone from recovery?
Click to expand...
Click to collapse
yes but screwy does not work, always the same
jeanyann said:
yes but screwy does not work, always the same
Click to expand...
Click to collapse
Try to flash the stock recovery with the ADB, and then install back the original ROM from the sdcard with the local updater.
jeanyann said:
good morning,
(escuse me for my english I am french,thank google)
I was passing by Rom KangVIP B015 (Android 5.0) and TWRP TWRP-ENG-5.0,
I was the original B003 702L, all works very well for several days,
I decided to make another backup with TWRP (with compression) externally on my sd,
all goes normally, and I then reboot,
and continually find myself on the recovery TWRP menu.
Can not start the system by download from TWRP.
I restored my backup but always the same.
I can put myself in download from the connected computer,
and I have access to the adb command.
by searching the internet, the problem has already produced on LG2 and other,
and there would execute commands either by download or in TWRP in terminal mode.
but I do not know if that works under the MediaPad x2,
and knows the commands to perform.
thank you in advance to all those who have the solution to this problem
Click to expand...
Click to collapse
Did you unlock the bootloader before you flashed anything?
ajsmsg78 said:
Did you unlock the bootloader before you flashed anything?
Click to expand...
Click to collapse
yes , booloader unlock , all works very well for several days, with Rom KangVIP B015 (Android 5.0) and TWRP TWRP-ENG-5.0,
hagba said:
Try to flash the stock recovery with the ADB, and then install back the original ROM from the sdcard with the local updater.
Click to expand...
Click to collapse
flash the stock recovery with the ADB , how I did in adb command, what I use Rom
i have GEM-702L , GEM-703L_B015 , GEM-703L_EMUI3.1_Android5.1_B106 , in dload
and all the rom KANGVIP (B015,B106,B109,B111) in zip
jeanyann said:
flash the stock recovery with the ADB , how I did in adb command, what I use Rom
i have GEM-702L , GEM-703L_B015 , GEM-703L_EMUI3.1_Android5.1_B106 , in dload
and all the rom KANGVIP (B015,B106,B109,B111) in zip
Click to expand...
Click to collapse
You need to boot into bootloader mode and fastboot flash 4 img files. It's mentioned in multiple threads here just use the search button or look in this thread:
http://forum.xda-developers.com/mediapad-x2/general/how-to-flash-rom-x2-gem-703l-gem-702l-t3228915
ajsmsg78 said:
You need to boot into bootloader mode and fastboot flash 4 img files. It's mentioned in multiple threads here just use the search button or look in this thread:
http://forum.xda-developers.com/mediapad-x2/general/how-to-flash-rom-x2-gem-703l-gem-702l-t3228915
Click to expand...
Click to collapse
I extracted the images of the GEM and GEM-702L-703L, but I have an error
when I want flasher fastboot flash system SYSTEM.img, both with
the system images of the 702L and 703L,
LOAD_FILE: could not allocate -2140949684 bytes for 703L
so I did not flash only the boot.img and recovery.img and reflash
the recorery TWRP TWRP-ENG-5.0, then reboot on TWRP,
restoring my last backup, and all is back to normal,
all working again.
thank you again to all
I just upgraded to EMUI 8.0/Oreo but my previous twrp.img isn't working anymore. Is there an updated one?
The latest version available gives this error:
Hi SirDarknight,
on Oreo the command for installing a recovery file is:
Code:
fastboot flash recovery_ramdisk twrp.img
maexl
maexl said:
Hi SirDarknight,
on Oreo the command for installing a recovery file is:
Code:
fastboot flash recovery_ramdisk twrp.img
maexl
Click to expand...
Click to collapse
Hi,
Could you please share the TWRP for Honor 8 Oreo? Thanks.
---------- Post added at 11:52 AM ---------- Previous post was at 11:51 AM ----------
maexl said:
Hi SirDarknight,
on Oreo the command for installing a recovery file is:
Code:
fastboot flash recovery_ramdisk twrp.img
maexl
Click to expand...
Click to collapse
Hi,
Could you please share the TWRP for Honor 8 Oreo? Thanks.
I need too. I tried twrp frd 3.2 emui8 from multi-tool 8(no access to /data and /system) , twrp blk 0.7( no access to /data and warning ./hisee_fs (invalid argument) but access to /system) and twrp p10_lite_0.4 (no access to /data and /system), still I can't access to /data and /system (TWRP shows "mount decrypt data enter password" I tried lock screen PIN, without PIN, no result).
When I did wipe(format data) from twrp blk recovery get access to data but honor stuck on start screen. Only reflash and wipe from original recovery helps and honor works, but still I can't access to /data and /system when I flash twrp.
Firmware FRD-L09C10B521 (8.0.0.521).
@MirtaX Hello, there is an another TWRP EMUI 8.0 version in Huawei Multi-Tool v8.
So check those 3 TWRP version below:
1) Official latest TWRP version: twrp-3.2.2-0-frd.img
2) Previous version (found in "Huawei Multi-Tool by Team MT" v8): FRD_TWRP_3.2.0_EMUI8.img
3) Modded TWRP version (found in "Huawei Multi-Tool by Team MT" v8): FRD_TWRP_S_mak_KV_v2_EMUI8.img
@Micdu70 Thank you for your reply, I tried those twrp:
1) It's for EMUI 5, so it doesn't work (error in fastboot).
2, 3) I don't see different, still the same result :/
MirtaX said:
@Micdu70 Thank you for your reply, I tried those twrp:
1) It's for EMUI 5, so it doesn't work (error in fastboot).
2, 3) I don't see different, still the same result :/
Click to expand...
Click to collapse
Check this link.. I installed this version after updating to oreo..
https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447
The easiest way is using MULTITOOL :good:
https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
$lim $hady said:
Check this link.. I installed this version after updating to oreo..
https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447
Click to expand...
Click to collapse
Which version oreo have you? 8.0.0.521? Have you question about password? Which version did you install? I tried 0.4, still question about password :/ Did you factory reset(where you write "yes")? Thanks
does anyone know how to fix the cams problems on treble roms? for me they don't work. And did anyone get to install the p treble?
(in Chinese) [HRT_残芯]荣耀8 EMUI8.0 TWRP3.2.1 中英 recovery 修复MTP 优化
https://club.huawei.com/thread-16023380-1-1.html
This recovery works. Tested on my FRD-AL00.
Before all, download update_data_full_public.zip and update_full_XXX-XXX_XXX_XXX.zip in FullOTA firmware for your model.
Then, you should do something in the recovery:
1. Format data
2. Install update_data_full_public.zip
3. Install update_full_XXX-XXX_XXX_XXX.zip
4. Advanced -> Fix DataEncryption
5. [Optional] Install Magisk
6. Reboot
This disabled Data Encryption, use at your own risk.
AmeliaZ said:
(in Chinese) [HRT_残芯]荣耀8 EMUI8.0 TWRP3.2.1 中英 recovery 修复MTP 优化
https://club.huawei.com/thread-16023380-1-1.html
This recovery works. Tested on my FRD-AL00.
Before all, download update_data_full_public.zip and update_full_XXX-XXX_XXX_XXX.zip in FullOTA firmware for your model.
Then, you should do something in the recovery:
1. Format data
2. Install update_data_full_public.zip
3. Install update_full_XXX-XXX_XXX_XXX.zip
4. Advanced -> Fix DataEncryption
5. [Optional] Install Magisk
6. Reboot
This disabled Data Encryption, use at your own risk.
Click to expand...
Click to collapse
Can you update this file here? I can't download a file from chinese forum. Thanks.
This worked.
fastboot flash recovery_ramdisk figo4.img
mega.nz/#F!3SwSFIgK!VvtbxPWV2PssIxoHQf556g!WXoRmTjJ
MirtaX said:
Can you update this file here? I can't download a file from chinese forum. Thanks.
Click to expand...
Click to collapse
Uploaded to MEGA:
Code:
https://mega.nz/#!4CgBiQrC!uvLRXnvMM8-Mazd5GY8vIwfx0SAlmFojGsleXFwlsHI
SHA-1: 6a9769bf2d18467812454599dbfb702364b3b10d
AmeliaZ said:
(in Chinese) [HRT_残芯]荣耀8 EMUI8.0 TWRP3.2.1 中英 recovery 修复MTP 优化
https://club.huawei.com/thread-16023380-1-1.html
This recovery works. Tested on my FRD-AL00.
Before all, download update_data_full_public.zip and update_full_XXX-XXX_XXX_XXX.zip in FullOTA firmware for your model.
Then, you should do something in the recovery:
1. Format data
2. Install update_data_full_public.zip
3. Install update_full_XXX-XXX_XXX_XXX.zip
4. Advanced -> Fix DataEncryption
5. [Optional] Install Magisk
6. Reboot
This disabled Data Encryption, use at your own risk.
Click to expand...
Click to collapse
After following this I got stuck in a bootloop, but I'm a noob when it comes to Oreo, TWRP and Magisk (last phone i modified was a Marshmallow Lenovo lol). Unchecking the box to mount /system read only and rebooting the recovery after every step solved the issue for me. Thank you very much! Noob question - are OTAs somehow flashable via TWRP? Just preparing for the future with having unlocked phone.
Nvm lol
Bloodysummer said:
After following this I got stuck in a bootloop, but I'm a noob when it comes to Oreo, TWRP and Magisk (last phone i modified was a Marshmallow Lenovo lol). Unchecking the box to mount /system read only and rebooting the recovery after every step solved the issue for me. Thank you very much! Noob question - are OTAs somehow flashable via TWRP? Just preparing for the future with having unlocked phone.
Click to expand...
Click to collapse
Short answer: NO.
Long answer: download hurupdater (search it on XDA), all three files provided by firmware finder and flash on TWRP. More info on hurupdater thread.
Has anyone found a fully working version of twrp? I'm on build 8.0.0.560 and I can't flash SuperSu from the recoveries posted in this thread.
delete
PremiumBlaze said:
I found a twrp working for honor 8 oreo, and I'm using b562 with omni oreo
https://www.google.com/amp/s/forum....velopment/recovery-twrp-3-2-1-0-t3769917/amp/
Dont worry if it for honor view 10 it works for my honor 8 for some reason.
I was able to flash magisk too
The back up for data don't work though
Click to expand...
Click to collapse
Thanks for helping! This recovery gave me the least errors. But I still wasn't able to root my phone, I'm mainly getting mounting issues. I get errors like failed to mount /hisee. Also every recovery that I've tried prompts me with a password when I first boot into twrp.
Code:
Warning! any damage done to your device is not my fault, use at your own risk!
This zip should be used mainly if you wiped system for some reason and didn't back up, its TA-1060 May patch system image + kernel + vendor files
Unlocked bootloader required!
TWRP
1. Boot into TWRP
2. Format /data partition in TWRP
3. Use 'adb push ta_1060_oreo_may_18.zip /sdcard/' in windows/linux/mac
4. Go to sdcard in TWRP and flash ta_1060_oreo_may_18.zip
5. Reboot to bootloader
6. use 'fastboot flash recovery recovery.bin' (Link bellow)
7. Optional: fastboot oem lock
8. reboot
9. on boot you will get encryption, click on the reset button when android loads
10. You will reboot into recovery then back into system, done
Fastboot
1. Extract zip file
2. flash system.img, boot.img, vendor.img in fastboot
3. fastboot reboot
Links:
Stock ROM zip May
Recovery image
Good luck
XDA:DevDB Information
[ROM][STOCK][TWRP][27/06/18]TA-1060 Stock Oreo 8.1, ROM for the Nokia 1
Contributors
sooti
ROM OS Version: 8.x Oreo
Version Information
Status: Stable
Created 2018-06-27
Last Updated 2018-06-27
So we can flash either through TWRP or Fastboot right?
Zeenat11 said:
So we can flash either through TWRP or Fastboot right?
Click to expand...
Click to collapse
I haven't tested fastboot but it should work. TWRP works 100%
Thank you very much, you are a life saver!!
I was stuck in a TWRP loop.
I tried flashing through TWRP but it didn't work but the fastboot method worked like a charm!
My phone is running again.
Thank you very much.
Is there any userdata.img available?
alexstarc said:
Thank you very much.
Is there any userdata.img available?
Click to expand...
Click to collapse
Nope but do you really need it? just format in fastboot or TWRP.
sooti said:
Nope but do you really need it? just format in fastboot or TWRP.
Click to expand...
Click to collapse
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
alexstarc said:
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
Click to expand...
Click to collapse
I wrote in the instructions...
If you get a password just enter a random one, then it will ask you to wipe the device, click ok and it will reboot to recovery and then wipe userdata and boot fine.
just make sure you flash the recovery.bin and not twrp before you wipe
alexstarc said:
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
Click to expand...
Click to collapse
Same happened to me. I solved it by a hard reset via the stock recovery.
Make sure you flash the recovery.bin like Sooti said.
Wiping through twrp doesn't work.
Nice, working twrp for Nokia 1.
I buyed this phone today. Waiting for customs
A little warning.
It looks like the recovery.bin I took from another nokia 1 device doesn't match the checksum check which causes a failed during ota updates, please only flash this rom if you soft bricked your device.
If anyone can get me TA-1060 stock recovery image that should solve it. for now you can't update the phone until a fix is found
I have Nokia Ta 1066. Will this rom work on mine? Also I read somewhere Ta 1060 is single sim variant. What about the second sim?
Has anyone with TA 1066 tried it?
Thanks. Both methods work fine. Don't ask how I found out.....
Can you share how you managed to backup stock recovery file. Maybe after all the steps above we can flash our own device recovery to make ota work again...
coolboyforeva said:
Can you share how you managed to backup stock recovery file. Maybe after all the steps above we can flash our own device recovery to make ota work again...
Click to expand...
Click to collapse
I don't have stock recovery from our device i have from another variant of Nokia 1
Hey guys i have a TA-1056 and after unlocking bootloader and flashing TWRP it booted to recovery and came up encrypted, after looking around the only solution was to format data, afterwards when rebooting it always boots to recovery, i tried flashing this zip and i get the same issue and i can't find the stock ROM for the 1056 anywhere online, can anyone help me out? i really appreciate it
Kurajmo said:
Nice, working twrp for Nokia 1.
I buyed this phone today. Waiting for customs
Click to expand...
Click to collapse
got any custom roms?
Does Nokia 1 support DT2W?
Sir, is that possible to get a stock rom of TA 1056 ?
I have searched everywhere but whole thing available over net just left my phone bricked. All i need is a working rom source. Even if that’s a custom rom too to flash via sp flash tool. Thanks in advance
Can any please repost the firmware , the link isn't working
Hello fellow A2 Lite owners!
I just got this device today and would LOVE to root 10.0.7.0, However it seems like the only way to go through this is by using a patched boot image which is not viable because none have showed up for 10.0.7.0 yet.
Will there be any other solutions for this? Thank you.
lgstylus2root said:
Hello fellow A2 Lite owners!
I just got this device today and would LOVE to root 10.0.7.0, However it seems like the only way to go through this is by using a patched boot image which is not viable because none have showed up for 10.0.7.0 yet.
Will there be any other solutions for this? Thank you.
Click to expand...
Click to collapse
I personally feel installing twrp offians twrp and flashing magisk is easyer
rob420p said:
I personally feel installing twrp offians twrp and flashing magisk is easyer
Click to expand...
Click to collapse
Obviously, It is my preferred way since I used it on a couple of devices including my Redmi Note 4 and Mi Pad.
My concern is not OTA but whether it would somehow break the ROM
Yes, I am aware of Mi Flash, Flashing stock ROMS, and other techniques but it's just that i don't have time for such long endeavors and would like to have a safe-ish way.
However I will try to get twrp running temporarily to install magisk.
lgstylus2root said:
Obviously, It is my preferred way since I used it on a couple of devices including my Redmi Note 4 and Mi Pad.
My concern is not OTA but whether it would somehow break the ROM
Yes, I am aware of Mi Flash, Flashing stock ROMS, and other techniques but it's just that i don't have time for such long endeavors and would like to have a safe-ish way.
However I will try to get twrp running temporarily to install magisk.
Click to expand...
Click to collapse
No it will not break the ROM I'm running the March update with twrp n magisk the only thing that does not work is backup n restore there is a new twrp 3.3.3.0 but I haven't installed it yet.
rob420p said:
No it will not break the ROM I'm running the March update with twrp n magisk the only thing that does not work is backup n restore there is a new twrp 3.3.3.0 but I haven't installed it yet.
Click to expand...
Click to collapse
How did you get TWRP to work? I am using the official image but whenever i boot into the .img, click cancel as instructed, and install the twrp zip, the result is that when i try to boot into recovery it says System has been destroyed (recovery only, normal boot is ok)
lgstylus2root said:
How did you get TWRP to work? I am using the official image but whenever i boot into the .img, click cancel as instructed, and install the twrp zip, the result is that when i try to boot into recovery it says System has been destroyed (recovery only, normal boot is ok)
Click to expand...
Click to collapse
Go to the pa ROM page and use that twrp that's offians twrp.the best guild ive seen n is type in customdriod mi a2 lite twrp and that page is the best in my opinion to follow I'll see if I can get a link for the page in a minute
Won't let me simend the link
rob420p,
Please provide links.
rob420p said:
Won't let me simend the link
Click to expand...
Click to collapse
Would you be capable of private messaging me the link?
I might have been able to find the link:
ww w.thecustom droid.com /install-twrp-recovery-root-xiaomi-mi-a2-a2-lite
Obviously remove all spaces.
lgstylus2root said:
I might have been able to find the link:
ww w.thecustom droid.com /install-twrp-recovery-root-xiaomi-mi-a2-a2-lite
Obviously remove all spaces.
Click to expand...
Click to collapse
I have followed this guide but it would always result in the installed version of TWRP not installing correctly, and the system mentioning "The System has been destroyed, Press power button to shut down"
How can i resolve this?
I just uploaded the boot and patched_boot imgs for 10.0.7.0 (March update) here are the links:
Stock boot.img : https://drive.google.com/open?id=17ukUahutrGCcx38ZXfzMaCCle71M_QuP
Patched boot.img with latest Magisk (07.04.2019 - I suggest patching the stock on your own to root the device) : https://drive.google.com/open?id=1RxFZcwi0utL3qGp9LKDMneBbggNMHmGY
marstonpear said:
I just uploaded the boot and patched_boot imgs for 10.0.7.0 (March update) here are the links:
Stock boot.img : https://drive.google.com/open?id=17ukUahutrGCcx38ZXfzMaCCle71M_QuP
Patched boot.img with latest Magisk (07.04.2019 - I suggest patching the stock on your own to root the device) : https://drive.google.com/open?id=1RxFZcwi0utL3qGp9LKDMneBbggNMHmGY
Click to expand...
Click to collapse
I figured out how to do it either way, thank you for your efforts however!
lgstylus2root said:
I figured out how to do it either way, thank you for your efforts however!
Click to expand...
Click to collapse
You can add the links to the main thread so that people can see :good:
Hi
Im trying to root V10.0.7.0.PDLMIXM Android on my A2 Lite with Magisk.
After fastboot boot patched_boot.img
Im getting bootloop, phone cannot boot (google lines endless loading).
After restart, goes well but no root.
Please help ! Thanks
max-damage said:
Hi
Im trying to root V10.0.7.0.PDLMIXM Android on my A2 Lite with Magisk.
After fastboot boot patched_boot.img
Im getting bootloop, phone cannot boot (google lines endless loading).
After restart, goes well but no root.
Please help ! Thanks
Click to expand...
Click to collapse
Search before asking : https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952
I did search and I followed procedure.
My phone fails to boot on step 10. when I load temporary patched boot.img over fastboot.
Thats my current problem.
I tried to load up downloaded pached boot.img for version V10.0.7.0.PDLMIXM
I also tried to make patched boot.img from original boot.img over phone via Magisk. It doesnt work, bootloop again.
max-damage said:
I did search and I followed procedure.
My phone fails to boot on step 10. when I load temporary patched boot.img over fastboot.
Thats my current problem.
I tried to load up downloaded pached boot.img for version V10.0.7.0.PDLMIXM
I also tried to make patched boot.img from original boot.img over phone via Magisk. It doesnt work, bootloop again.
Click to expand...
Click to collapse
I'm stuck with the same problem.
Booting with patched_boot.img (made on my own or downloaded from this forum) make the phone not starting, blocked on white screen.
Have you already solved?
lgstylus2root said:
How did you get TWRP to work? I am using the official image but whenever i boot into the .img, click cancel as instructed, and install the twrp zip, the result is that when i try to boot into recovery it says System has been destroyed (recovery only, normal boot is ok)
Click to expand...
Click to collapse
Only boot twrp not to Flash it...
Boot twrp command » fastboot boot twrp.img
Flash twrp command » fastboot flash recovery twrp.img
I assume you tried "flashing twrp" command, if that's the case it will replace your boot.img to twrp.img that's why it appears the "system has been destroyed" error... Try the "boot twrp command" if you want to access twrp temporarily... Coz right now we cant do(flash full twrp recovery) that as far as I know....
Winchester316 said:
Only boot twrp not to Flash it...
Boot twrp command » fastboot boot twrp.img
Flash twrp command » fastboot flash recovery twrp.img
I assume you tried "flashing twrp" command, if that's the case it will replace your boot.img to twrp.img that's why it appears the "system has been destroyed" error... Try the "boot twrp command" if you want to access twrp temporarily... Coz right now we cant do(flash full twrp recovery) that as far as I know....
Click to expand...
Click to collapse
I believe we can I have heard reports offains 3.3.3. Twrp can do it I haven't tryed yet.but I did have twrp with root running on the march update but I'm on pa now
Follow These methods (100% worked)
1. Boot to fastboot mode (power +vol down)
2. Extract ADB.rar to Drive C (Put the recovery and vbmeta files in ADB Folder) vbmeta link Below
3. Connect Phone To PC with USB Cable
4. from Start run CMD and type cd:\adb (pres enter) And type the following Commands :
fastboot devices
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash recovery Twrp-3.4.2B_toco_by.alex.msk1407.img (you can rename it to twrp.img) -LINK BELOW (Many Thanks To Alex msk)
fastboot reboot recovery
5. in twrp: wipe-> format data -> Type yes and tap enter (blue key)
6. Copy xiaomi.eu rom and magisk.zip to phone
8. in twrp: install rom and magisk.zip
9. in twrp: Boot to recovery (the phone is restarting to twrp again)
10. in twrp: reboot system
12. Enjoy
ADB Link :
https://mega.nz/file/x8whTZSa#UP7UvnDO7rsuefBWb1meUd4iZZXMJBHIDUa1lMnQXNI
TWRP Link :
https://mega.nz/file/0lAywALA#hx6U3_xgW3fpndSR0OWsRBxEncQ9CGQb2ezMOAldTRQ
3.4.0-14 TWRP Link:
https://forum.xda-developers.com/mi...overy-unofficial-twrp-xiaomi-mi-note-t4107209
vbmeta Link:
https://mega.nz/file/t4QmXACT#hqN6TNDt2mlAPrQUnClGtmaCvWJR3eO3TRAa8I4JhGk
Magisk Link :
https://mega.nz/file/Y4BEBILD#kre2gRvSJgwJRto1Yg-o7gblTRXAftUGxJSoKNowWkI
xiaomi.eu 12.0.3 Rom Link (Updated):
https://sourceforge.net/projects/xi...e10LITE_V12.0.3.0.QFNMIXM_v12-10.zip/download
thank
thanks and good to see, that the mi note 10 lite has it own section now. hope there will come a lot of custom things.
Does Gpay work with bootloader unlocked and xiaomi.eu rom?
is the widevine L1 working?
is the hdr working
For installing updates, do we need to follow the dirty flash process via TWRP? I tried via the updater but the process simply restarts mobile and nothing happens.
New version of Xiaomi.eu ROM is out.
Question is how to updtae without losing data?
What's the problem? The test TWRP from mauronofrio can't decrypt data? Sry for the questions, I have not tested it yet
eugenwollekneul said:
What's the problem? The test TWRP from mauronofrio can't decrypt data? Sry for the questions, I have not tested it yet
Click to expand...
Click to collapse
Yes, cant decrypt -> probably can't update.
Even if you do use OTG to read the .zip...
Will it overwrite to encrypted partitions? Won't that break the system?
Or
Will it boot fine - but will the updated ROM be able to read the probably still encrypted user data?
maxlieb said:
Yes, cant decrypt -> probably can't update.
Even if you do use OTG to read the .zip...
Will it overwrite to encrypted partitions? Won't that break the system?
Or
Will it boot fine - but will the updated ROM be able to read the probably still encrypted user data?
Click to expand...
Click to collapse
I have a Redmi note 8 with xiaomi.eu but I think I can help you. In order to update you flash the new zip. It just overwrites the system partition not the data. And you are still able to decrypt them. There is no problem I tried it. You will have to reflash magisk although.But in case anything goes wrong just format data and you will be fine.
PinkNinja said:
I have a Redmi note 8 with xiaomi.eu but I think I can help you. In order to update you flash the new zip. It just overwrites the system partition not the data. And you are still able to decrypt them. There is no problem I tried it. You will have to reflash magisk although.But in case anything goes wrong just format data and you will be fine.
Click to expand...
Click to collapse
There`s a new twrp that decrypts everything so no more problem anyway
is this twrp fully working? or does it have the same problems as mauronofrio's Twrp 3.3.1.0?
Ahmed Hesham said:
is this twrp fully working? or does it have the same problems as mauronofrio's Twrp 3.3.1.0?
Click to expand...
Click to collapse
Yes it's fully working.
Στάλθηκε από το Mi Note 10 Lite μου χρησιμοποιώντας Tapatalk
Super weird... it didnt work for me... flashing was successful
but it keeps rebooting to fastboot mode.
While doing format data, i did receive an error message "unable to find /metadata" is that normal?
EDIT: So what happen is, I did all over again with slightly different steps
1) i reflashed official firmware to revive my phone
2) Once I'm able to boot on official ROM, I flash TWRP
3) Format Data + restart TWRP
4) Copied ROM and flash Xiaomi EU rom
5) Restart to system immediately after flashing ROM. Managed to boot Xiaomi EU rom.
6) Reboot to recovery and flash magisk
7) Restart to system, set up, and done.
Kediraksith said:
1) i reflashed official firmware to revive my phone
Click to expand...
Click to collapse
How you reflas official firmware?
andriej1974 said:
How you reflas official firmware?
Click to expand...
Click to collapse
I think he did it with the miflash tool. I had to do it so because I stucked in Fastboot mode.
I also had a problem with metadata. I have recovery aleks.msk, can enter fastboot but nothing else. Miflash does not work, uploading the firmware via recovery does not get up.
In fastboot mode copy latest xiaomi.eu zip (not the fastboot, the regular one)to the phone and flash it in twrp - reboot to system
Can anyone please post a link to Xiomi EU ROM. Can't find it. Thanks
RAMBO29 said:
Can anyone please post a link to Xiomi EU ROM. Can't find it. Thanks
Click to expand...
Click to collapse
In the First Post