Has anyone tried any of the gsi custom ROMs on their phone? What has your experience been?
creeve4 said:
Has anyone tried any of the gsi custom ROMs on their phone? What has your experience been?
Click to expand...
Click to collapse
I successfully booted AEX official GSI. Data and wifi wouldn't work though. This was a few weeks back.
dpryor88 said:
I successfully booted AEX official GSI. Data and wifi wouldn't work though. This was a few weeks back.
Click to expand...
Click to collapse
Same for me. Tried 3 different ROMs, all the same issue. Tried this a few days ago.
HavocOS GSI was successfully flashed on my sargo
Here is manual - https://source.android.com/setup/build/gsi#flashing-gsis
But I can`t have root and active edge support
dpryor88 said:
I successfully booted AEX official GSI. Data and wifi wouldn't work though. This was a few weeks back.
Click to expand...
Click to collapse
Did you try a different kernel? Wifi not working sounds like a kernel issue.
Related
So I installed CyanogenMod 10.2 for my rooted HTC Sensation. I fully wiped the phone before flashing the ROM. Then I flashed all of the GAPPS and SuperSU. Then at the end I also flashed Sultan's kernel r44.5 with the aroma installer. Then I reboot my device for the first time with CM. I finished the setup and everything but I realise my wifi wasn't working. I press on and it does nothing except puts the slider on on but it's not working. I try downloading WiFix because some people said it fixed the problem for them. So any suggestions on what I should do?
kevinspl2000 said:
So I installed CyanogenMod 10.2 for my rooted HTC Sensation. I fully wiped the phone before flashing the ROM. Then I flashed all of the GAPPS and SuperSU. Then at the end I also flashed Sultan's kernel r44.5 with the aroma installer. Then I reboot my device for the first time with CM. I finished the setup and everything but I realise my wifi wasn't working. I press on and it does nothing except puts the slider on on but it's not working. I try downloading WiFix because some people said it fixed the problem for them. So any suggestions on what I should do?
Click to expand...
Click to collapse
did you try to flash the boot.img of the rom via fastboot command?
note: by the way why did you flash supersu?
every custom rom comes pre-rooted
rzr86 said:
did you try to flash the boot.img of the rom via fastboot command?
note: by the way why did you flash supersu?
every custom rom comes pre-rooted
Click to expand...
Click to collapse
Sorry I forgot to mention that part. I always flash the boot.img since I always get bootloops and boot freezes.
kevinspl2000 said:
Sorry I forgot to mention that part. I always flash the boot.img since I always get bootloops and boot freezes.
Click to expand...
Click to collapse
reflash with full wipe and do not flash the supersu zip
see how it goes
rzr86 said:
reflash with full wipe and do not flash the supersu zip
see how it goes
Click to expand...
Click to collapse
Still the same ;/
Definaltely a problem with the kernel. Tried with ViperS sense 5.0 ROM, still a problem with the WiFi. I completely reflashed the ROM without the custom kernel and WiFi worked... Hm... Any suggestions? I also found out that the kernel tweaks some WiFi options. To be exact it was an update to the WiFi driver from Google's 3.0 kernel. Any way to stop the WiFi tweak?
kevinspl2000 said:
Definaltely a problem with the kernel. Tried with ViperS sense 5.0 ROM, still a problem with the WiFi. I completely reflashed the ROM without the custom kernel and WiFi worked... Hm... Any suggestions? I also found out that the kernel tweaks some WiFi options. To be exact it was an update to the WiFi driver from Google's 3.0 kernel. Any way to stop the WiFi tweak?
Click to expand...
Click to collapse
actually in vipers 5.0.0 rom works only one kernel
the one that it is included
rzr86 said:
actually in vipers 5.0.0 rom works only one kernel
the one that it is included
Click to expand...
Click to collapse
Yeah, but there is a special version of the Sultan kernel that works with the viperS. The author of the sultan kernel said he got help from SebastianFM to make it work with the viperS rom. Soo... yeah
kevinspl2000 said:
Yeah, but there is a special version of the Sultan kernel that works with the viperS. The author of the sultan kernel said he got help from SebastianFM to make it work with the viperS rom. Soo... yeah
Click to expand...
Click to collapse
i didn't know that
but why he didn't publish it in the forum?
rzr86 said:
i didn't know that
but why he didn't publish it in the forum?
Click to expand...
Click to collapse
He did check this out: http://forum.xda-developers.com/showthread.php?t=2221714
kevinspl2000 said:
He did check this out: http://forum.xda-developers.com/showthread.php?t=2221714
Click to expand...
Click to collapse
yeah you are right
now i remembered
but it has no working camera
and AFAIK he abandoned it
rzr86 said:
yeah you are right
now i remembered
but it has no working camera
and AFAIK he abandoned it
Click to expand...
Click to collapse
Is there going to be updates? I hope so. Also about the WiFi, any solution?
kevinspl2000 said:
Is there going to be updates? I hope so. Also about the WiFi, any solution?
Click to expand...
Click to collapse
do you still have wifi issues?
i thought that with viperS 5.0.0 default's kernel it would be fine
try then to use a ruu.exe
http://forum.xda-developers.com/showthread.php?t=1672425
I used CM11 (http://forum.xda-developers.com/showthread.php?t=2530073) without issues
WiFi is working fine.
Hi guys, since our device supports project Treble we can flash a Generic System Image(GSI). Many thanks to the developers work on this i hope many members can support them with feedback and donations. By the way our device is supported you can check the list of supported devices for phhusson Roms .
------------------------------------------------------------------------------------
If you want to test a couple of roms by @phhusson visit these links:
------------------------------------------------------------------------------------
- phh-Treble AOSP Thread
- LineageOS 15.1 phh-Treble Thread
- Resurrection Remix phh-Treble Thread
--------------------------------------------------------------
Other Treble supported Roms by other developers:
--------------------------------------------------------------
- Pixel Experience [AOSP] by @jhenrique09
- DroidOnTime - dotOS 2.x by @kubersharma
- Cosmic-OS_Pulsar__8.1.0 by @noobstyle1337
- AOSIP by @noobstyle1337
+ Make sure to flash the "Image for ARM64 A-only device" since our device supports only partition A.
+ How to flash guide
Please give your feedback on tested Roms. Good luck
I wouldn't mind testing these, as I do have TWRP and have my bootloader unlocked, but correct me if I'm wrong, we lose the squeezing function if we flash any of these correct?
hamsteyr said:
I wouldn't mind testing these, as I do have TWRP and have my bootloader unlocked, but correct me if I'm wrong, we lose the squeezing function if we flash any of these correct?
Click to expand...
Click to collapse
Yep, also the stock camera app might not work well if you manage to install it. That's why I am not in a hurry to test these Roms mainly because this device is my daily driver.
Why not try the PixelExperience Rom -
https://forum.xda-developers.com/pr...e-development/8-1-0-pixel-experience-t3796011
edkmho said:
Why not try the PixelExperience Rom -
https://forum.xda-developers.com/pr...e-development/8-1-0-pixel-experience-t3796011
Click to expand...
Click to collapse
Cool, I will add it to the list. Thanks
Ran v17 of Phh-treble earlier this month to get a taste of stock. It was so close to a daily driver back then.
Camera was a bit of a bummer. They said camera2 api was disabled; enabling it and throwing on google cam just caused crashes on launch. Stock camera was pretty potato but worked.
Apart from that I just had an issue with the vibration motor being a bit strange (a bit too aggressive during taps) and the play store not downloading apps (which appears to be fixed in the latest version).
Bluetooth music also appeared to have random cutouts during playback.
Everything else I used appeared to work. No squeeze feature though.
has anyone tried the PixelExperience rom?
Can anyone please write a guide from scratch ?
Guys,
I have flash the PixelExperience GSI and my phone go into bootloop.
I am still in the process of recovery to stock now.
I flashed
1. Lineage
2. PixelExperience
3. AOSP
All of them having bootloop.
kenosis said:
I flashed
1. Lineage
2. PixelExperience
3. AOSP
All of them having bootloop.
Click to expand...
Click to collapse
Strange, may I know the flash process you went through.
Rashad83 said:
Strange, may I know the flash process you went through.
Click to expand...
Click to collapse
I flashed via TWRP.
1. Wipe Data/Cache/Factory
2. Put xx.zip on SD card
3. Flash it
kenosis said:
I flashed via TWRP.
1. Wipe Data/Cache/Factory
2. Put xx.zip on SD card
3. Flash it
Click to expand...
Click to collapse
Did you change the the rom from .zip to .img you need to do that first, if that didn't work try to flash using Adb instead of TWRP.
I have attached a link to the guide, it might help you with troubleshooting.
Rashad83 said:
Did you change the the rom from .zip to .img you need to do that first, if that didn't work try to flash using Adb instead of TWRP.
I have attached a link to the guide, it might help you with troubleshooting.
Click to expand...
Click to collapse
Thank you. It works now after re-flashing stock firmware.
I tried both TWRP and fastboot method. All of them work. I am now on phh-treble AOSP.
kenosis said:
Thank you. It works now after re-flashing stock firmware.
I tried both TWRP and fastboot method. All of them work. I am now on phh-treble AOSP.
Click to expand...
Click to collapse
You are welcome, let us know later of your review of it and others. Good luck!
Rashad83 said:
You are welcome, let us know later of your review of it and others. Good luck!
Click to expand...
Click to collapse
Able to flash phh-treble but the voice always comes from speaker.
which rom is best?anyone tested it?
Can someone successfully flash PixelExperience ROM?
kenosis said:
Can someone successfully flash PixelExperience ROM?
Click to expand...
Click to collapse
i try but unsuccess, error bootloop
---------- Post added at 05:48 AM ---------- Previous post was at 05:25 AM ----------
kenosis said:
Can someone successfully flash PixelExperience ROM?
Click to expand...
Click to collapse
kenosis said:
Thank you. It works now after re-flashing stock firmware.
I tried both TWRP and fastboot method. All of them work. I am now on phh-treble AOSP.
Click to expand...
Click to collapse
Hi, I flash phh-treble AOSP in TWRP and reboot system but it show boot animation verry long and don't come in android
any one tested Lineage? it works?
Download : MOD Edit :- Links Removed
Let me know if it boots etc.
Gapps are included.
I have been hoping RR would come for the Pixel XL 3 - can't flash it now, am at work - but will give it a shot when I get home tonight - thanks
This didn't boot for me. It flashed fine in twrp and the boot animation came up and ran for a few minutes and then it booted back into twrp. Im going to try flashing a kernel on top and see if it boots.
No luck even after flashing a kernel. Any ideas on how to get it to boot up?
abduljaz7 said:
This didn't boot for me. It flashed fine in twrp and the boot animation came up and ran for a few minutes and then it booted back into twrp. Im going to try flashing a kernel on top and see if it boots.
No luck even after flashing a kernel. Any ideas on how to get it to boot up?
Click to expand...
Click to collapse
I think this one is GSI ROM, we have separate guide to Flash the ROM.
I strongly not recommend to flash this . Since we are not sure ,who is build and there is no flash guide
Sent from my Pixel 3 using Tapatalk
sendhiloo7 said:
I think this one is GSI ROM, we have separate guide to Flash the ROM.
I strongly not recommend to flash this . Since we are not sure ,who is build and there is no flash guide
Click to expand...
Click to collapse
I had GSI working on the pixel 3 xl, but just wasn't getting text messages for some reason, everything else worked fine
Cozzeck said:
I had GSI working on the pixel 3 xl, but just wasn't getting text messages for some reason, everything else worked fine
Click to expand...
Click to collapse
Which GSI Rom did you use ?.
jawonder said:
Which GSI Rom did you use ?.
Click to expand...
Click to collapse
Resurrection remix, I put my steps I used here
https://forum.xda-developers.com/pixel-3-xl/how-to/guide-how-to-install-gsi-rom-pixel-3-xl-t3892685
Cozzeck said:
Resurrection remix, I put my steps I used here
https://forum.xda-developers.com/pixel-3-xl/how-to/guide-how-to-install-gsi-rom-pixel-3-xl-t3892685
Click to expand...
Click to collapse
Thanks but the link for avbctdisable.zip in not working.
Thread Closed.
No details mentioned except a random link from internet.
Hey, I'm a bit irritated by the fact that everytime when installing a rom I have to make a full format because of the encryption. Is there a way to permanently disable it?
https://forum.xda-developers.com/oneplus-6/how-to/tutorial-decrypt-flash-rom-pie-oreo-roms-t3838643
This works for me.
tiga016 said:
https://forum.xda-developers.com/oneplus-6/how-to/tutorial-decrypt-flash-rom-pie-oreo-roms-t3838643
This works for me.
Click to expand...
Click to collapse
i second this post can confirm. working flawlessly and switched between 3 different roms
Blunts47 said:
i second this post can confirm. working flawlessly and switched between 3 different roms
Click to expand...
Click to collapse
So I understand that now you don't have to do a full format when switching to a different, but do you still need to install OOS before installing other roms?
szybki_ben said:
So I understand that now you don't have to do a full format when switching to a different, but do you still need to install OOS before installing other roms?
Click to expand...
Click to collapse
From my experience all I did was wipe data once in twrp and then you are good to go flashing any ROM
Will this work for OnePlus 6T as well? I wish to upgrade to an Android 13 custom ROM from the current OOS 11. The device is rooted.
Hi anyone can help me to find a working version of TWPR recovery for Redmi note 11 pro 5G (veux)?
katzis said:
Hi anyone can help me to find a working version of TWPR recovery for Redmi note 11 pro 5G (veux)?
Click to expand...
Click to collapse
katzis said:
Hi anyone can help me to find a working version of TWPR recovery for Redmi note 11 pro 5G (veux)?
Click to expand...
Click to collapse
Twrp is not stable right now for veux, it's working fine but not for custom rom.
SharmagRit said:
Twrp is not stable right now for veux, it's working fine but not for custom rom.
Click to expand...
Click to collapse
Why all of a sudden, everything works fine on custom, I use twrp to set custom.
Everything is perfectly set up and works.
arraki said:
Why all of a sudden, everything works fine on custom, I use twrp to set custom.
Everything is perfectly set up and works.
Click to expand...
Click to collapse
Sorry sir, but most of the users having issue with touch after flashing twrp ana vendor_boot , we have to reboot to recovery for 4 to 5 times for touch working and after reboot it's not working again, that's the problem sir.
SharmagRit said:
Sorry sir, but most of the users having issue with touch after flashing twrp ana vendor_boot , we have to reboot to recovery for 4 to 5 times for touch working and after reboot it's not working again, that's the problem sir.
Click to expand...
Click to collapse
Well, that's right, recovery is based on the boot of the global firmware 13.0.4.0
Respectively, and vendor_boot should be taken from this firmware.
I added the ability to backup/flash this section in recovery specifically for customs.
Everything is done right in the recovery, and yes, this recovery works fine on stock firmware 13.0.5.0 and customs based on it.
arraki said:
Well, that's right, recovery is based on the boot of the global firmware 13.0.4.0
Respectively, and vendor_boot should be taken from this firmware.
I added the ability to backup/flash this section in recovery specifically for customs.
Everything is done right in the recovery, and yes, this recovery works fine on stock firmware 13.0.5.0 and customs based on it.
Click to expand...
Click to collapse
Where I can find?
arraki said:
Why all of a sudden, everything works fine on custom, I use twrp to set custom.
Everything is perfectly set up and works.
Click to expand...
Click to collapse
Where I can find the version that you using?
katzis said:
Where I can find the version that you using?
Click to expand...
Click to collapse
[SHARED][RECOVERY][UNOFFICIAL] TWRP 3.7.0_12 for VEUX/PEUX
Hello everyone, one user under the nickname yurxxl from the site 4 PDA, at my request, will assemble a recovery for us, it was his assembly that I posted in the topic...
forum.xda-developers.com
arraki said:
[SHARED][RECOVERY][UNOFFICIAL] TWRP 3.7.0_12 for VEUX/PEUX
Hello everyone, one user under the nickname yurxxl from the site 4 PDA, at my request, will assemble a recovery for us, it was his assembly that I posted in the topic...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks you
arraki said:
Well, that's right, recovery is based on the boot of the global firmware 13.0.4.0
Respectively, and vendor_boot should be taken from this firmware.
I added the ability to backup/flash this section in recovery specifically for customs.
Everything is done right in the recovery, and yes, this recovery works fine on stock firmware 13.0.5.0 and customs based on it.
Click to expand...
Click to collapse
Thanks sir for work