viper4android profiles for op7pro - OnePlus 7 Pro Questions & Answers

What's the best profiles for op7pro and where can I get them? Google and search is no help
Mostly just for YouTube on the phone and Bluetooth speakers for music and Android auto music in my car

The Best profile will be subjective. What I like my settings you may not. The profiles can be created by you, by changing the settings yourself. You are going to need to experiment with each setting and yes there is a ton of them.

Viper settings are really subjective and based on the type of speaker/headphones you're using. I have a general setting that works well in both my car and on my Apple AirPods. I prefer punchy bass and clear mids and highs so this may not be the best choice for you. I also know that with my Bose bluetooth speaker these settings actually made it worse. It's best to play around with them on your own but here is my profile:
Playback Gain Control:
Effect Strength: Slight
Max Gain: 6x
Max output: -1.0 dB
FIREqualizer:
-4.2 db
-2.3 db
-5.7 db
+1.0 db
-1.3 db
+2.7 db
-2.6 db
+4.5 db
-1.8 db
+2.5 db
Field Surround:
Surround Strength: Slight
Mid image strength: Level 5
Reverberation:
Room Size: 25m2
Sound Field: 5m
Damping factor: 0%
Wet signal: 0%
Dry signal: 50%
Dynamic System:
Listening device: High-end Headphone v2
Dynamic Bass: 50%
Viper Bass:
Bass Mode: Pure Bass+
Bass Frequency: 55 hz
Bass Boost: 12.0 dB
Viper Clarity:
Clarity Mode: OZone+
Clarity: 8.0 dB

I am honestly just looking for something better than stock and I liked the deep bass that came with nolimits but didn't really care for nolimits in general but I put in the settings listed here and I'll definitely try them too

i.Design said:
Viper settings are really subjective and based on the type of speaker/headphones you're using. I have a general setting that works well in both my car and on my Apple AirPods. I prefer punchy bass and clear mids and highs so this may not be the best choice for you. I also know that with my Bose bluetooth speaker these settings actually made it worse. It's best to play around with them on your own but here is my profile:
Playback Gain Control:
Effect Strength: Slight
Max Gain: 6x
Max output: -1.0 dB
FIREqualizer:
-4.2 db
-2.3 db
-5.7 db
+1.0 db
-1.3 db
+2.7 db
-2.6 db
+4.5 db
-1.8 db
+2.5 db
Field Surround:
Surround Strength: Slight
Mid image strength: Level 5
Reverberation:
Room Size: 25m2
Sound Field: 5m
Damping factor: 0%
Wet signal: 0%
Dry signal: 50%
Dynamic System:
Listening device: High-end Headphone v2
Dynamic Bass: 50%
Viper Bass:
Bass Mode: Pure Bass+
Bass Frequency: 55 hz
Bass Boost: 12.0 dB
Viper Clarity:
Clarity Mode: OZone+
Clarity: 8.0 dB
Click to expand...
Click to collapse
May Ice Bear ask if Viper4Android drains more battery when audio is playing? What's i.Design's Viper4Android settings for the OnePlus 7 Pro's speakers?

Ice Bear said:
May Ice Bear ask if Viper4Android drains more battery when audio is playing? What's i.Design's Viper4Android settings for the OnePlus 7 Pro's speakers?
Click to expand...
Click to collapse
It doesn't drain any more battery. I have FIREqualizer set to small speakers, reverb on with same settings as above and extra loud (slight, 4x, -1.9dB)

Related

Best DSP manager settings!

Hi, after many months and Power Amping I decided to stop PA and use UberMusic with DSP!
Now if you don't know what DSP manager is, well it is an application used to enhance music experience!
It has 5 options.
-Dynamic Range Compression
(Compresses loud sounds and amplifies quieter sounds for a "balance")
-Bass Boost
(Amplifies Bass sounds (bass guitar, "thumps" lower sounds))
-Equalizer
(Changes the sounds or levels of a song more on this later)
-Loudness Compensation
(Makes the track or sound louder leading to possible distortion)
-Virtual Room 3D effect
(Mimics a "3D" effect (think toy microphone))
Okay so you might be saying. "It depends on what people like" or "These settings are not optimal"
Well not exactly.
I have researched all functions and have become a noobie Audiophile.
These settings aren't my "this sounds good" setting. These are chosen according on how music and headphones work.
These settings work on almost all kinds of songs! Headphones don't matter either it will enhance the headphones!
Now for the settings.
For the first DYNAMIC RANGE COMPRESSION: You want to turn this completely off. And I'll explain why.
This makes the sounds leveled but amplifies or makes the track louder which leads to distortion at high levels. And one REALLY IMPORTANT REASON. Unless you have a 80's or 90's or lower song that is NOT mastered (updated) then this option is bad. All modern songs are already really compressed and most people agree.
Bass Boost:
Leave it at Slight or Medium.
some headphones have little bass and some have a lot.
Equalizer
You want to male them look like stair steps going from left to right.
Loudness compensation:
It is like Dynamic range compression but doesn't change sounds or levels them it just makes it louder...I use Voodoo Sound so its not needed but if you have an HTC or Motorola phone then set it to weak or strong to prevent distortion.
Headphone Virtual Room effect.
This option tries to make the song feel surround soundy, but it just doesn't work for most. It takes some sounds and covers them as all it does it just produce an echo effect so off.
Give feedback!
DSP
This information was useful. Thanks!
Useful Information
Thanx Allan, its really useful information

[Q] Limited Audio output

Hello,
I just purchased Samsung Galaxy Core DUOS mobile. Everything is great but the audio output is too limited (or controlled).
I love to play with high bass and treble but it controls audio output whenever I increase bass and/or treble.
It looks like there is built-in volume control that controls it. If I decrease both bass and treble than it increased audio but when I increase bass or treble than it decrease audio output. I think this is to protect ears for high volume but I like it. I am always hearing high music on other china mobiles and they are working great.
I tried to increase music by Speaker Boost plugin and also tried Equilizer plugin but nothing changed.
What I want is to disable the automatic controller which is decreasing output audio when I set high bass/treble. Is there any settings?
I am playing my MP3 in default player provided in mobile.
You can wait for the custom roms which will have beats audio which will be a please to the ears.
*PRESS THANKS IF I HAVE HELPED*
Why So Serious?!

Bass lovers' DSP EQ

In the headset tab
dynamic range compression= off
Bass Boost = Slight(For headphones with in built bass boost),Moderate(for normal ones)
Equalizer = on
Custom
Equalizer values are:- 8.5 6.7 6.3 3.3 4.5 6.8
loudness compensation=disabled
virtual room effect:-
Suit yourself
i switched it off
these settings are good only for trance but might sound good with normal songs

[SPEAKER] Share Your Viper4Android Speaker Settings

Hello, I have found a good viper4android settings for headphone, output on earphones(wired) is very phenomenal. but I'm yet to find any speaker profile or settings.
feel free to share your speaker settings.
Thanks.
I'm on OOS Beta10
efakkawy98 said:
Hello, I have found a good viper4android settings for headphone, output on earphones(wired) is very phenomenal. but I'm yet to find any speaker profile or settings.
feel free to share your speaker settings.
Thanks.
I'm on OOS Beta10
Click to expand...
Click to collapse
can u share your v4a settings
badboyarbaz said:
can u share your v4a settings
Click to expand...
Click to collapse
MASTER LIMITER
Output gain: 0dB
Output pan: 50:50
Threshold limit: -3dB
FIR equalizer
1.7, 3.6, 3.8, 2.6, 0.9, 1.6, 5.4, 7.1, 6.4, 4.8
Convolver
Impulse response: NerdyFullo
Cross channel: 0%
Field Sorround
Surround strength: 5
Mid image strength: 7
Headphone surround +
Level: 2
Dynamic bass strength
Device Type: Extreme headphone(v2)
Dynamic bass strength: 30%
ViPER bass
Bass mode: Natural bass
Bass frequency: 100Hz
Bass gain: 3.5dB
ViPER Clarity
Clarity mode: OZone+
Clarity gain: 6dB
Auditory system protection
Binaural level: 1
efakkawy98 said:
MASTER LIMITER
Output gain: 0dB
Output pan: 50:50
Threshold limit: -3dB
FIR equalizer
1.7, 3.6, 3.8, 2.6, 0.9, 1.6, 5.4, 7.1, 6.4, 4.8
Convolver
Impulse response: NerdyFullo
Cross channel: 0%
Field Sorround
Surround strength: 5
Mid image strength: 7
Headphone surround +
Level: 2
Dynamic bass strength
Device Type: Extreme headphone(v2)
Dynamic bass strength: 30%
ViPER bass
Bass mode: Natural bass
Bass frequency: 100Hz
Bass gain: 3.5dB
ViPER Clarity
Clarity mode: OZone+
Clarity gain: 6dB
Auditory system protection
Binaural level: 1
Click to expand...
Click to collapse
He's asking for SPEAKER profiles.
EXTRA LOUD : effect strength- extreme, max output 0db.
MASTER GATE : output gain - 6db.
This will give a boost in overall output sound from speaker.
Convolver
Really powerful convolver for a bass. I'll check in every level of it
HOW TO INSTALL V4A NOT WORKED ON android 10 NITROGEN OS

V4A Speaker Settings

Anyone using V4A have a perfect speaker setup? I don't want to just boost the volume because the speaker tends to get shrill and high pitched at higher values. I'm aiming to make the speaker sound more bassy and deeper.
Edit: I've already set the equalizer to bass boost.

Categories

Resources