Database Info

[Q] Desire S with CM7 - Which radio?

I've noticed significant battery drain on all the CM7 ROMs available at the moment. Some users report better battery usage (6-7 mA) than others (anywhere between 14-70 mA), so my questions are:
1. what is your idle usage? Use battery monitor widget to find out
2. what radio do you use?
3. do you find mobile standby/cell standby always consuming the highest drain, even when you have been actively using your phone?

djsubtronic said:
I've noticed significant battery drain on all the CM7 ROMs available at the moment. Some users report better battery usage (6-7 mA) than others (anywhere between 14-70 mA), so my questions are:
1. what is your idle usage? Use battery monitor widget to find out
2. what radio do you use?
3. do you find mobile standby/cell standby always consuming the highest drain, even when you have been actively using your phone?
Click to expand...
Click to collapse
1. Iddle consumption seems to be at 7ma
2. 20.28I.30.085AU_3805.06.02.03_M
3. Android System is highest at 56%, Mobile Standby follows it with 16%.
I'm on Superkid's CM 1.3 + Tiamat 1.0.4.1 with 2G only, sync off and CPU at 652 min and 1190 max, smartass.

Not running cm7 myself running with lbc but weve also identified a battery drain issue recently, we have come to conclusion that its intermittent and happens when wi fi is enabled.
See http://forum.xda-developers.com/showthread.php?t=1194786
Running with the latest radio 06.02.03
Sent from my HTC Desire S using XDA Premium App

rubbish said:
1. Iddle consumption seems to be at 7ma
2. 20.28I.30.085AU_3805.06.02.03_M
3. Android System is highest at 56%, Mobile Standby follows it with 16%.
I'm on Superkid's CM 1.3 + Tiamat 1.0.4.1 with 2G only, sync off and CPU at 652 min and 1190 max, smartass.
Click to expand...
Click to collapse
I'm using SuperKid's 1.3 + Tiamat 1.0.4.1 with 2G, sync off as well. However I'm using radio 20.28b.30.0805U_38.03.02.11_M, and my idle usage never drops below 14mA. I tried using the radio you use, however my idle fluctuated around the 20s and 30s with that. I'm so baffled as to why this is the case. Could it be dependent on the type of SD card?

ben_pyett said:
Not running cm7 myself running with lbc but weve also identified a battery drain issue recently, we have come to conclusion that its intermittent and happens when wi fi is enabled.
See http://forum.xda-developers.com/showthread.php?t=1194786
Running with the latest radio 06.02.03
Sent from my HTC Desire S using XDA Premium App
Click to expand...
Click to collapse
I am experiencing drains regardless of the WiFi. Every radio I've tried except hte default one it came with (in the post above) the idle power usage fluctuates heavily. But no matter what it never drops below 14 mA. I'm trying to figure out why it never hits single figures like some people are getting. It's not intermittent, it just refuses to drop below 14 mA.

djsubtronic said:
I'm so baffled as to why this is the case.
Click to expand...
Click to collapse
I'm not an expert for sure but please try the following as there'll be no harm anyway. Go into recovery, wipe cache + dalvic cache and then reflash Tiamat 1.0.4.1.
I wasn't doing any measurements before but I'm pretty sure that my battery drain used to be higher before I've done that. See if it helps.

rubbish said:
I'm not an expert for sure but please try the following as there'll be no harm anyway. Go into recovery, wipe cache + dalvic cache and then reflash Tiamat 1.0.4.1.
I wasn't doing any measurements before but I'm pretty sure that my battery drain used to be higher before I've done that. See if it helps.
Click to expand...
Click to collapse
Thank you. Trying that now.
Can you let me know if you did the boot image fix posted by NeoLojik after doing the above?

No, I didn't. I've tryed it at the earlier stage but since it broke wi fi I reflashed the original kernel (which was Carniab's test version at this time I think) and never got back to it.

rubbish said:
No, I didn't. I've tryed it at the earlier stage but since it broke wi fi I reflashed the original kernel (which was Carniab's test version at this time I think) and never got back to it.
Click to expand...
Click to collapse
Thanks. I'll try to clone your config and post with my results.

Tried your method above, but it doesn't go below 14 mA. I also tried a different SD card and still no luck.

Bump..........

Hi,
with CM 7.1.0 RC 1 and tiamat kernel v1.0.4.1, my Desire S consumption in sleep mode (no wifi, no bluetooth, Edge/3G enabled) is going down to 10-12 mA.
My best figure was with LBC mod 0.5.4 where it was 9 mA.
My radio is 20.28I.30.085AU_3805.06.02.03_M
Mobile Standby is 24% (which i find a bit weird too, with virtous/lbc never had that).
CPU is set to: smartass, 268-1036 Mhz
Overall i have no issue with CM 7 beta 1.1

zas666 said:
Hi,
with CM 7.1.0 RC 1 and tiamat kernel v1.0.4.1, my Desire S consumption in sleep mode (no wifi, no bluetooth, Edge/3G enabled) is going down to 10-12 mA.
My best figure was with LBC mod 0.5.4 where it was 9 mA.
My radio is 20.28I.30.085AU_3805.06.02.03_M
Mobile Standby is 24% (which i find a bit weird too, with virtous/lbc never had that).
CPU is set to: smartass, 268-1036 Mhz
Overall i have no issue with CM 7 beta 1.1
Click to expand...
Click to collapse
Thanks for the reply.
When your mobile standby was on 24% what was your phone usage like since you unplugged it?

Gsm only and almost no data since it was using wifi for data. No phone calls. ATM it is 25% ...
Sent from my Desire S using XDA App

i'm also use this radio & cM7 , but my gf found that my sound is lower than the sense rom while making a phone call

djsubtronic said:
Tried your method above, but it doesn't go below 14 mA. I also tried a different SD card and still no luck.
Click to expand...
Click to collapse
Hi dj
The difference between our measurements could be due to us using different tools? I've been using Battery monitor widget which, as I've read today, tends to give inaccurate (lower than in reality) figures. I'm currently on 1.3.2 version of CM from Superkid and BMW was also showing 6 or 7 mA. So I've installed Currentwidget and it displays figure of 12mA in sleep mode. This isn't far off from what you get.

rubbish said:
Hi dj
The difference between our measurements could be due to us using different tools? I've been using Battery monitor widget which, as I've read today, tends to give inaccurate (lower than in reality) figures. I'm currently on 1.3.2 version of CM from Superkid and BMW was also showing 6 or 7 mA. So I've installed Currentwidget and it displays figure of 12mA in sleep mode. This isn't far off from what you get.
Click to expand...
Click to collapse
I was using Battery Monitor Widget as well, and was getting 14 mA on that.
How do you check idle power on Current Widget? I just put it on my home screen using default settings, switched my phone to sleep for a minutes, then turned on the screen and it said 28 mA..

how about your battery?
is it a fake one?

djsubtronic said:
I just put it on my home screen using default settings, switched my phone to sleep for a minutes, then turned on the screen and it said 28 mA..
Click to expand...
Click to collapse
That's how I do it as well. 12mA. Could it be that you have poor signal coverage in your area? I can't think of anything else.

labstar said:
how about your battery?
is it a fake one?
Click to expand...
Click to collapse
Nope, brand new phone with the original battery. Maybe it's defective?
rubbish said:
That's how I do it as well. 12mA. Could it be that you have poor signal coverage in your area? I can't think of anything else.
Click to expand...
Click to collapse
I kept it on forced 2G mode, and the signal was very good..

Wi-Fi Optimisation Option In WiFi Settings.

Hi all,
Not seen a thread for this yet. Believe this is new to the 4.2 update as this option never existed previously.
In the Advanced Settings Menu for Wi-Fi you can see this box and it is checked on by default.
Can anyone with the ability verify what this does potentially? Might be useful in future development possibly?
Furthermore, I wondered that with all these TF700 Battery Usage threads there may be a potential error somewhere with the settings that having an adverse effect? This probably wouldn't be the first time something like this happend with ASUS.
______________
Edit:
Side not noticed while trying to do some crude testing of this that there is a SIGNIFICANT improvement in battery life by turning brightness to SUPER IPS+ and then move the brightness down to a comfortable level,due the the extreme brightness the level can be very low 10-30 % and still easily bright enough

KinetiClutch said:
Side not noticed while trying to do some crude testing of this that there is a SIGNIFICANT improvement in battery life by turning brightness to SUPER IPS+ and then move the brightness down to a comfortable level,due the the extreme brightness the level can be very low 10-30 % and still easily bright enough
Click to expand...
Click to collapse
The battery drain is only proportional to the final brightness.
"IPS+ is nothing more than a fancy name for brightness." (dasunsrule32) - http://forum.xda-developers.com/showpost.php?p=39888516&postcount=1788

_that said:
The battery drain is only proportional to the final brightness.
"IPS+ is nothing more than a fancy name for brightness." (dasunsrule32) - http://forum.xda-developers.com/showpost.php?p=39888516&postcount=1788
Click to expand...
Click to collapse
Ahh okay thanks for the link.
Does any one know what the Wi Fi optimisation actually impacts?

KinetiClutch said:
Ahh okay thanks for the link.
Does any one know what the Wi Fi optimisation actually impacts?
Click to expand...
Click to collapse
It gives your wifi adapter lets power, which in return, shortens your wifi range, but decreases battery consumption because I usually could walk around the house with full bars, but now its on optimization its quite a bit shorter, get 1-2 bars at most on porch(cheap router lol) but used to get almost full on 4.1.1 without the "optimization".
Tylor

Tylorw1 said:
It gives your wifi adapter lets power, which in return, shortens your wifi range, but decreases battery consumption because I usually could walk around the house with full bars, but now its on optimization its quite a bit shorter, get 1-2 bars at most on porch(cheap router lol) but used to get almost full on 4.1.1 without the "optimization".
Ahh okay makes sense. I Wonder if this is alterable at all with Root tools. Or this likely to be CROM / KERNEL based
Tylor
Click to expand...
Click to collapse
Ahh okay makes sense. I Wonder if this is alterable at all with Root tools. Or this likely to be CROM / KERNEL based
Only saying that for moments when you're not moving from the WiFi point and could potentially decrease power even further like now currently where I am in the same room as my rooter

KinetiClutch said:
Ahh okay makes sense. I Wonder if this is alterable at all with Root tools. Or this likely to be CROM / KERNEL based
Only saying that for moments when you're not moving from the WiFi point and could potentially decrease power even further like now currently where I am in the same room as my rooter
Click to expand...
Click to collapse
I truthfully dont know if you can decrease it, but there are apps to make your wifi range expands, which consumes more power but I would not tweak with the power, just either turn it on or off. It is there to help, Before there was no option so it can only help battery life.
Tylor

KinetiClutch said:
Ahh okay makes sense. I Wonder if this is alterable at all with Root tools. Or this likely to be CROM / KERNEL based
Only saying that for moments when you're not moving from the WiFi point and could potentially decrease power even further like now currently where I am in the same room as my rooter
Click to expand...
Click to collapse
try this. I worked with it a while back. got it working on phone, but noticed no difference on tablet. since system can now control it, perhaps it's scalable now.
http://jhanford.wordpress.com/2011/10/03/lowering-wi-fi-transmit-power-in-android/

may actually be worth a go!
This is exactly what I had in mind

Battery juice
_that said:
The battery drain is only proportional to the final brightness.
"IPS+ is nothing more than a fancy name for brightness." (dasunsrule32) - http://forum.xda-developers.com/sho...ps. L0L
Don't say "duh" - Hope it helps . . .
Click to expand...
Click to collapse

doesn't work
KinetiClutch said:
may actually be worth a go!
This is exactly what I had in mind
Click to expand...
Click to collapse
just wanted to give you a heads up. this DOES NOT WORK with JB 4.2
the newest version of the OS DOESN'T utilize iwconfig anymore. i wasted 8 hours trying to get it working til i found that tidbit out.
just hoping i can save you time.

How is the 7.0 upgrade overall compared to the XZ on Android 6?

Can anyone list the bugs they've found since updating to 7.0 from MM? Also, how is battery life and overall speed/smoothness compared to MM? I can't find any definitive info on this and as I'm happy with MM I'm loathe to upgrade but know that the update will auto-install one of these days.

better battery (at least on data for me )
smootheness is a bit better
and the ram management is hell better than before...
camera i belive is same
boot time a bit better

Totally agree with that adding the camera is enough good for my expectations (im not trying to win a photo competition) and it works even better in low light than 6.0 (just an impression)... Otg is workin very good...
Bugs? Need more testing time none by now?
The lack of mhl or any other video out alternative is killing me badly. Very dissapointed
No fm support by now also.

So it's just as fast and smooth?
No bluetooth/Wifi/signal issues?
No lag or freezing? Thanks guys.

sunking101 said:
So it's just as fast and smooth?
No bluetooth/Wifi/signal issues?
No lag or freezing? Thanks guys.
Click to expand...
Click to collapse
im using bluetooth so much with my sony sbh80.. no problems
and signal? all my internet is based on cell internet and nope... everything is ok
wifi i dont use alot... unless im at home but its good and no problems
its fast and smooth

Can somebody confirm that the vulkan api its active în games? Its any difference now în gaming??

The battery is vastly improved. Albeit, I only updated this morning. But I have 3.5hours of SoT and I'm still at 50%
Did about 30mins of calling today and lots of emails/texting and chrome and playing around with split screen

Not noticed the battery but the swipe from the top works different
Sent from my F8331 using Tapatalk

Andybrad said:
Not noticed the battery but the swipe from the top works different
Click to expand...
Click to collapse
Right, new swipe from top shortcuts needs two pushes to activate instead 6.0 single tap to enable style. Don`t like too much but works ok

If you just pull down the a row of icons, that's still tap to activate or deactivate.

Slow browsing on wifi then 3G

Hello,
I've got a great wifi strenght, copying big files from the wifi goes really fast, still, i've discover that browsing remain much much slower than 3G.
Multiple wifi has been tested, ping to their wifi is excellent (between 5-8ms).
It can take up to 4-5 seconds to charge a page no matter which browser i uses, if you have many little images, you see they loading peace per peace.
Reset has been done after Nougat update. I don't remember if it was the case before Nougat update.

gontie said:
Hello,
I've got a great wifi strenght, copying big files from the wifi goes really fast, still, i've discover that browsing remain much much slower than 3G.
Multiple wifi has been tested, ping to their wifi is excellent (between 5-8ms).
It can take up to 4-5 seconds to charge a page no matter which browser i uses, if you have many little images, you see they loading peace per peace.
Reset has been done after Nougat update. I don't remember if it was the case before Nougat update.
Click to expand...
Click to collapse
Do you have apps installed that use wifi only?

I found the issue, it was on my wifi.
Reduced the beacon interval from 800 to 100. copying big files are slower but connection stability and speed on the 6x is much much faster.

gontie said:
I found the issue, it was on my wifi.
Reduced the beacon interval from 800 to 100. copying big files are slower but connection stability and speed on the 6x is much much faster.
Click to expand...
Click to collapse
There you go. I'm glad that you solved it.
Sent from my Honor 8 using XDA Labs

That's good

gontie said:
I found the issue, it was on my wifi.
Reduced the beacon interval from 800 to 100. copying big files are slower but connection stability and speed on the 6x is much much faster.
Click to expand...
Click to collapse
Can you explain more? You changed it from the router or from the phone?

oae08 said:
Can you explain more? You changed it from the router or from the phone?
Click to expand...
Click to collapse
He meant the router

Question Stuck on A09 rom anyone received OTA to android 12 / UI 3.0 ?

Got myself a realme gt neo 2 a few days back and got automatically updated to A09. My info says : RMX3370TW_11_A.09 which is weird as i bought the phone in Thailand (TH).
There is no Region option in the Language settings on my rom for some reason.
I have been trying to find the update to Realui 3.0 android 12 with a lot of VPN but no luck sofar
Anyone an idea how to get the update or is it maybe not released yet in this region ?
Thanks

<Moderator Edit>: English translation added to the top.
Yes, I got realme ui 3.0 v.c.02.
Original:
มีครับ ผมได้รับ realme ui 3.0 v.c.02

Magst64 said:
Got myself a realme gt neo 2 a few days back and got automatically updated to A09. My info says : RMX3370TW_11_A.09 which is weird as i bought the phone in Thailand (TH).
There is no Region option in the Language settings on my rom for some reason.
I have been trying to find the update to Realui 3.0 android 12 with a lot of VPN but no luck sofar
Anyone an idea how to get the update or is it maybe not released yet in this region ?
Thanks
Click to expand...
Click to collapse
Is there idle drain in a09? Iirc that is the latest version for everyone while rui 3.0 is being rolled out.

No problems at all with idle drain or anything else in a09. Very stable

NotAnotherRookie said:
Is there idle drain in a09? Iirc that is the latest version for everyone while rui 3.0 is being rolled out.
Click to expand...
Click to collapse
mine is on RMX3370_11_A.09 and for me, the idle drain is present. Losing 2% every hour is a lot.

I think it will be a while for a.09 user to be updated to rui 3. I've got the same version but I change my rom to indian a.07, register for trial version c.03 and from then, got official c.04 android 12 update. So far its been great. The battery is okay. After updating, I recommend to clear data or factory reset and give it some time to adjust to your usage and update the system in background. It only consume battery for couple of days and got back to normal. Don't worry about it.

x1fu5 said:
mine is on RMX3370_11_A.09 and for me, the idle drain is present. Losing 2% every hour is a lot.
Click to expand...
Click to collapse
You need to let the phone charge to 100% and just leave it charged for 3 hours in order to let the phone optimize it after every update. I just found out about this recently.
My only issue with a.09 is for some weird reason realme underclocked the cpu. So there is performance hiccup especially if you play games like genshin.

Magst64 said:
Got myself a realme gt neo 2 a few days back and got automatically updated to A09. My info says : RMX3370TW_11_A.09 which is weird as i bought the phone in Thailand (TH).
There is no Region option in the Language settings on my rom for some reason.
I have been trying to find the update to Realui 3.0 android 12 with a lot of VPN but no luck sofar
Anyone an idea how to get the update or is it maybe not released yet in this region ?
Thanks
Click to expand...
Click to collapse
you can use my packages for twrp, and manages to update, that's how I did it with my device.

NotAnotherRookie said:
You need to let the phone charge to 100% and just leave it charged for 3 hours in order to let the phone optimize it after every update. I just found out about this recently.
My only issue with a.09 is for some weird reason realme underclocked the cpu. So there is performance hiccup especially if you play games like genshin.
Click to expand...
Click to collapse
hmm does the 100% chargee state is in powered on / off position?
Your 2nd point is valid though. I forgot exactly how Pcore and Ecore frequency range when battery temps reach 45-46C playing genshin, monitored via cpufloat app.
Funny thing is if you multitask genshin and then opening antutu benchmark, the cpu frequency went all the way to the max. When idle, this improve genshin impact fps by like 5-10 fps in cities like Liyue. As soon as you focus to the game however, the cpu then throttle back. For me, this is the same as cheating lol.

x1fu5 said:
hmm does the 100% chargee state is in powered on / off position?
Your 2nd point is valid though. I forgot exactly how Pcore and Ecore frequency range when battery temps reach 45-46C playing genshin, monitored via cpufloat app.
Funny thing is if you multitask genshin and then opening antutu benchmark, the cpu frequency went all the way to the max. When idle, this improve genshin impact fps by like 5-10 fps in cities like Liyue. As soon as you focus to the game however, the cpu then throttle back. For me, this is the same as cheating lol.
Click to expand...
Click to collapse
Powered on. Afterwards I left it with wifi on untouched while I sleep. Probably up to 8 hours.
Yea this is kinda cheating. My guess is realme get bombarded with complaint by indian user not getting a lot of SoT when playing BGMI, so they release this update unannounced to underclock cpu hence giving you the illusion you have a better SoT while playing games.
The reality is you're using half of what sd870 have to offer. Pretty stupid of realme if my assumption is correct, since gaming for mobile realistically on heavy games you should only expect up to 4 hours max. Honestly idk why realme is doing this. Even on rui 3.0 it os underclock.

NotAnotherRookie said:
Powered on. Afterwards I left it with wifi on untouched while I sleep. Probably up to 8 hours.
Yea this is kinda cheating. My guess is realme get bombarded with complaint by indian user not getting a lot of SoT when playing BGMI, so they release this update unannounced to underclock cpu hence giving you the illusion you have a better SoT while playing games.
The reality is you're using half of what sd870 have to offer. Pretty stupid of realme if my assumption is correct, since gaming for mobile realistically on heavy games you should only expect up to 4 hours max. Honestly idk why realme is doing this. Even on rui 3.0 it os underclock.
Click to expand...
Click to collapse
allright, i usually unplug the phone when battery % reach 82. You know, the more you actually charge to 100%, the less charge cycle you got during the battery lifetime. However i will try your suggestion, see if it will improve the idle drain. If it's not, then i assume the idle drain is always present and will have to wait until the Android 12 arrive. If android 12 does not solve this issue, i guess i have to live with it. I remember owning a Poco F1 and that phone idle drain is like 2% per 8 hours! Which is a total contrary to 2% per hour lmao.
Realme did put some sort of limit on the cpu side, i think, especially in Genshin. You can let the phone be cooled by active cooler like blackshark fun cooler 2. You open the battery app and it reads like 22 C. You turn on the so called "GT Mode" and run Genshin Impact. And the performance figure? Well it performed more or less the same when the device run without the cooler. And even if you use the cooler, and lower the graphic settings to the lowest, it wont get any better since it was cpu limited. (at least, this is my experience while monitoring things)

x1fu5 said:
allright, i usually unplug the phone when battery % reach 82. You know, the more you actually charge to 100%, the less charge cycle you got during the battery lifetime. However i will try your suggestion, see if it will improve the idle drain. If it's not, then i assume the idle drain is always present and will have to wait until the Android 12 arrive. If android 12 does not solve this issue, i guess i have to live with it. I remember owning a Poco F1 and that phone idle drain is like 2% per 8 hours! Which is a total contrary to 2% per hour lmao.
Realme did put some sort of limit on the cpu side, i think, especially in Genshin. You can let the phone be cooled by active cooler like blackshark fun cooler 2. You open the battery app and it reads like 22 C. You turn on the so called "GT Mode" and run Genshin Impact. And the performance figure? Well it performed more or less the same when the device run without the cooler. And even if you use the cooler, and lower the graphic settings to the lowest, it wont get any better since it was cpu limited. (at least, this is my experience while monitoring things)
Click to expand...
Click to collapse
Yep pretty much the same thing for me. It was actually fine on a.07, but a.09 is when I noticed the underclock. Btw I've just received rui 3.0, updating it now and I'll see how it goes. Will update on performance etc.

Hello. An input to OP from a Swedish user.
I got my phone 1 week ago and even though version A.09 (Android 11) and UI 3.0 (Android 12) is released and available in my region, the phone would not update, or even find any updates. I checked the IMEI via Realme EU site and the IMEI and region checks out correct as EU version.
I found a tip on a Swedish site, and following that, I am now happy with my phone running Realme UI 3.0/Android 12. Here is what I did - please note that at least this worked for my Swedish EU phone and I am not sure if it works in general:
Downloaded and installed a VPN apk from Google Play store (not sure if I am allowed to name any specific)
Established connection to France via VPN
Checked for firmware - the phone immediately found the A.09.
Turned off VPN and downloaded and installed the update. I found out that it was enough to have the VPN connection active while searching for FW - the update could then be downloaded without VPN.
Once A.09 was installed correctly I once again activated the France VPN connection and searched for new FW - immediately the phone found the Realme UI 3.0/Android 12. Followed the same procedure as 4) and the phone is now running the correct region version of Realme UI 3.0.
BTW - I factory reset after the UI 3.0 installation - very fluid experience so far.
Hope this is helpful to EU users who haven't got UI 3.0. Good luck

sten_amund said:
Hello. An input to OP from a Swedish user.
I got my phone 1 week ago and even though version A.09 (Android 11) and UI 3.0 (Android 12) is released and available in my region, the phone would not update, or even find any updates. I checked the IMEI via Realme EU site and the IMEI and region checks out correct as EU version.
I found a tip on a Swedish site, and following that, I am now happy with my phone running Realme UI 3.0/Android 12. Here is what I did - please note that at least this worked for my Swedish EU phone and I am not sure if it works in general:
Downloaded and installed a VPN apk from Google Play store (not sure if I am allowed to name any specific)
Established connection to France via VPN
Checked for firmware - the phone immediately found the A.09.
Turned off VPN and downloaded and installed the update. I found out that it was enough to have the VPN connection active while searching for FW - the update could then be downloaded without VPN.
Once A.09 was installed correctly I once again activated the France VPN connection and searched for new FW - immediately the phone found the Realme UI 3.0/Android 12. Followed the same procedure as 4) and the phone is now running the correct region version of Realme UI 3.0.
BTW - I factory reset after the UI 3.0 installation - very fluid experience so far.
Hope this is helpful to EU users who haven't got UI 3.0. Good luck
Click to expand...
Click to collapse
may I know what version of rui 3.0? is it C.02?

Alifirdaus said:
may I know what version of rui 3.0? is it C.02?
Click to expand...
Click to collapse
Most certainly - yes, it is version 11_C.02