Can someone provied me blank flash file for motorola g6. I hard bricked my devices while updating it. There was an OTA update in my device and i was so excited that i didint notice battery percentage and started my update process. While updating my devices ran out of juice and now it is dead. It means not responding at all (not booting regularly or in recovery). When i connect it in my pc it is detected as Qualcomm HS-USB QLoader 9008. Please help me. I didnt find any blank flash file for my motorola g6. :crying::crying:
Related
I used the LG Flash Tool 2014 for my device to try to recover from a bricked phone. And I think i made it worse after using the kdz file and it completed 100%. I took the battery out and unplugged the phone when it was done. It wont even show anything on the screen now or go into recovery mode. But I do show RELINK HS-USB QDLoader 9008 (COM5) under the device options in my device manager when I connect the phone to the computer. Also it does make the device connected sound when I plug it in the computer. What can I do to get out of this mess? Thanks in the advance for any help that I can get.
Any help will be appreciated. THanks.
[Q] Bricked. Erased/messed up bootloader. Win recognized as "HS-USB QDLoader 9008".
Hello.
Finally I hard bricked my Photon Q. I think I erased an unlocked bootloader. Right now phone cannot boot into fastboot mode. Power+Vol up, Power+Vol down held long do nothing. After connecting to Windows PC, phone is recognized as "HS-USB QDLoader 9008". I found drivers on the net. RSDlite recognizes device, but flashing fails with message that it cannot switch phone from download mode. I found QPST service software used to flash bootloader. Right now I think the problem is that I don't have proper bootloader images for Photon Q, and to be honest, I don't really know what options to use (the software seems quite complicated).
Has anyone encoutered (and solved) similar issues? Do you have any ideas, what to do? I tried some generic Qualcomm files, but couldn't flash them.
Anyone, please, help me, if you can.
Chris
i tryed some tutorial where is guy give me img files which I pushed (by my mistake) install with "DiskImageRev2" (it is alot solutions no one can know what is best solution for those phones...)... display on my phone don't poweing on, i have installed only devices RELINK HS-USB QDLoader 9008 (on some port)
bifore i have made any kind of changes i had problem with "Security boot error" with pink screen and m not have USB Debugging enabled in phone couse is alrdy been down and m been unable to enable usb debugging....
did have any kind of repair excluding flash box?
sorry for my bad english..
Try this first
In the following thread, you can see my post as a reply. Refer to that and see whether you can fix your phone. You'll need your data cable came with your phone..
https://forum.xda-developers.com/android/help/help-bootloop-lg-l70-d320-t3304382#post70962321
Hi
I have a lava iris 406q. Recent i flashed it using qpst but it got disconnected and now it is not booting up no matter what keys i press. The display doesn't turn on and charging logo is also not displayed. I've tried all methods like removing battery, charging for upto 24 hrs, but nothing worked. I've googled the symptoms of the device and i found that my phone is hard bricked. It is still being detected in device manager as "Qualcomm HS-USB Qdloader 9008 (COM 6)" I tried flashing it using QFIL Tool but it says that " Fail Failed to switch to edl mode"
I found another solution on the web which is burning a backup.img of the emmc file then the phone will boot into edl mode but i do not have a backup of the emmc file (my biggest mistake not to take a backup).
If anyone have the same device plz take a backup if emmc and upload it.
Please help me!!
hello
i tried to go back from android 12 to android 11, and i didn't succeed, on the way i got a brick, i can't even enter fastboot. The phone is in qualcomm 9008 status. I have tried to flash the blankflash file from the LOLINET site of motorola from my phone with no effect, because when I flash it reboots and stays in qualcomm 9008, could someone help me?