hello
i tried to go back from android 12 to android 11, and i didn't succeed, on the way i got a brick, i can't even enter fastboot. The phone is in qualcomm 9008 status. I have tried to flash the blankflash file from the LOLINET site of motorola from my phone with no effect, because when I flash it reboots and stays in qualcomm 9008, could someone help me?
Related
[Q] Bricked. Erased/messed up bootloader. Win recognized as "HS-USB QDLoader 9008".
Hello.
Finally I hard bricked my Photon Q. I think I erased an unlocked bootloader. Right now phone cannot boot into fastboot mode. Power+Vol up, Power+Vol down held long do nothing. After connecting to Windows PC, phone is recognized as "HS-USB QDLoader 9008". I found drivers on the net. RSDlite recognizes device, but flashing fails with message that it cannot switch phone from download mode. I found QPST service software used to flash bootloader. Right now I think the problem is that I don't have proper bootloader images for Photon Q, and to be honest, I don't really know what options to use (the software seems quite complicated).
Has anyone encoutered (and solved) similar issues? Do you have any ideas, what to do? I tried some generic Qualcomm files, but couldn't flash them.
Anyone, please, help me, if you can.
Chris
Can someone provied me blank flash file for motorola g6. I hard bricked my devices while updating it. There was an OTA update in my device and i was so excited that i didint notice battery percentage and started my update process. While updating my devices ran out of juice and now it is dead. It means not responding at all (not booting regularly or in recovery). When i connect it in my pc it is detected as Qualcomm HS-USB QLoader 9008. Please help me. I didnt find any blank flash file for my motorola g6. :crying::crying:
Hi all
Last week I upgraded my pixel 4a to Android 12 used the fastboot + sunfish-s2b2.211203.006, after restart the device, it just stuck and not responding to any of recovery/fastboot key combination(I can not run into the fastboot mode again). When I connected the device by usb only the "Qualcomm HS-USB QDLoader 9008" founded. After some research, I found some useful infomation in this thead https://forum.xda-developers.com/t/flashed-pixel-4a-with-pixel-5-image-by-mistake.4267097/, the author used the 4a mbn file to regain his device, but I can not find how to revive device by the mbn file. After google search, there is nothing useful to help about mbn. It any one konw how to deal with mbn file?
Thanks
I tried flashing Nameless A12 rom over NA OOS 11 after successfully downgrading from OOS A12. However, now I am in crashdump mode and cannot access even the bootloader. I downloaded the files from the XDA forum but MSMTool doesn't recognize my phone. I think I have the correct drivers installed because I can see my device in the device manager list as Qualcomm HS QDLoader but there's a small yellow exclamation mark under it. Does that signify anything? Someone please help.
Device: oneplus 8T indian version
Try reinstalling the Qualcomm driver.
Hi Everyone,
I tried to flash a custom rom on my ysl but it wasn't its rom (didn't know) so it's brick
nothing work in the phone but when i connect it into my pc it appear in device manger in port section under name (i can't remember it) but after updating it with qualcom drivers it changed to Qualcomm HS-USB Diangnostics 900E
i tried to flash offical fastboot rom with mi flash but give me missmatching device and image and failed too in Qualcomm image flash tool then i update phone driver manually to Qualcomm HS-USB QDLoader 9008 and tried again in mi flash but it give me error massage immediately and in QIFT give me sahara error.
i searched a lot about it i found something like EDL MODE and EDL CABLE but i don't know anything about those stuff and found something about change emmc image and don't know something about it else, so is there anything i can do to unbrick my phone or it dead without another chance ?
Ahmed-PP said:
Hi Everyone,
I tried to flash a custom rom on my ysl but it wasn't its rom (didn't know) so it's brick
nothing work in the phone but when i connect it into my pc it appear in device manger in port section under name (i can't remember it) but after updating it with qualcom drivers it changed to Qualcomm HS-USB Diangnostics 900E
i tried to flash offical fastboot rom with mi flash but give me missmatching device and image and failed too in Qualcomm image flash tool then i update phone driver manually to Qualcomm HS-USB QDLoader 9008 and tried again in mi flash but it give me error massage immediately and in QIFT give me sahara error.
i searched a lot about it i found something like EDL MODE and EDL CABLE but i don't know anything about those stuff and found something about change emmc image and don't know something about it else, so is there anything i can do to unbrick my phone or it dead without another chance ?
Click to expand...
Click to collapse
If you got detected the device under Qualcomm HS-USB 9008, then your device entered to EDL mode. Check well, what the error was, pay attention to the connection, that device get attached permanently during the flashing session.