i tryed some tutorial where is guy give me img files which I pushed (by my mistake) install with "DiskImageRev2" (it is alot solutions no one can know what is best solution for those phones...)... display on my phone don't poweing on, i have installed only devices RELINK HS-USB QDLoader 9008 (on some port)
bifore i have made any kind of changes i had problem with "Security boot error" with pink screen and m not have USB Debugging enabled in phone couse is alrdy been down and m been unable to enable usb debugging....
did have any kind of repair excluding flash box?
sorry for my bad english..
Try this first
In the following thread, you can see my post as a reply. Refer to that and see whether you can fix your phone. You'll need your data cable came with your phone..
https://forum.xda-developers.com/android/help/help-bootloop-lg-l70-d320-t3304382#post70962321
Related
Hi all, I'm new here and i have a malfunctioned phone so thought I'd give this a shot and learn some stuff from you guys..
I have a bricked galaxy s3 which cant get into download mode. Computer detects it as Qualcomm HS-USB QDloader 9008 in device manager and QPST software sees it in download mode via the same COM port.
Now I want to know... is there any luck is this phone completely dead? and what if i send it back for repair (i took it for JTAG and i was told the chip that boots the phone is burnt out when flashing a corrupted rom)
If you have any info or experience regarding this your help is much needed and appreciated.
4tunecookie said:
Hi all, I'm new here and i have a malfunctioned phone so thought I'd give this a shot and learn some stuff from you guys..
I have a bricked galaxy s3 which cant get into download mode. Computer detects it as Qualcomm HS-USB QDloader 9008 in device manager and QPST software sees it in download mode via the same COM port.
Now I want to know... is there any luck is this phone completely dead? and what if i send it back for repair (i took it for JTAG and i was told the chip that boots the phone is burnt out when flashing a corrupted rom)
If you have any info or experience regarding this your help is much needed and appreciated.
Click to expand...
Click to collapse
It is hard bricked my friend a lot of us have suffered this also, JTAG or maybe warranty is your only option.
Hey guys, how do you?
I have a LG F60 (d392) and I tried to flash the original rom (because it was resetting everytime I turned 3G on) but it stuck in 99% on flashtool.
After that I disconnect it from the pc and now its bricked and keeps just QDLOADER 9008 in dev manager when I plug it (which means I'm unable to flash any ROM now).
Please, can somebody help me? I've found no method for unbrick this phone with Boarddiag yet... Besides, I found it has a MSM8916 and there's no such chipset on the software.
Thanks in advance.
Anybody?
Sorry to insist but still looking for a solution
gersonlobo said:
Sorry to insist but still looking for a solution
Click to expand...
Click to collapse
you got your self an hard bricked device
but is not that popular so there is no way to fix it so yeah there is no tool specified for your device sorry i would like to help bu i dont know how
You could try to find the qualcomm usb drivers and see if QPST will communicate with the device.
I used the LG Flash Tool 2014 for my device to try to recover from a bricked phone. And I think i made it worse after using the kdz file and it completed 100%. I took the battery out and unplugged the phone when it was done. It wont even show anything on the screen now or go into recovery mode. But I do show RELINK HS-USB QDLoader 9008 (COM5) under the device options in my device manager when I connect the phone to the computer. Also it does make the device connected sound when I plug it in the computer. What can I do to get out of this mess? Thanks in the advance for any help that I can get.
Any help will be appreciated. THanks.
I have a BIG problem with my Pixi 3 4.5 4G... I was trying to change the rom to the stock one, and I did it successfully, It never boot again It was stuck at the "COMPANY LOGO" so I star the whole process again, what happened is (This was very stup...) I click on the "Format Whole Flash" after that the phone is dead (just the led on the screen is working), I just use FlashTools to put the stock ROM again (so that means that Preloader was working fine at this point) and after the "Format Whole Flash" Im unable to get anymore the Preloader, and I try with a different Phone Just to check if the drivers was working and yes it is, so now I cant access on even recovery mode.
Note: The MTK USB PORT never change to PreLoader USB VCOM Port <Thats what Im looking.
same problem here!
Same problem :/
I tried Flashing my acer liquid Z330 with a custom rom after installing TWRP the rom could not Flash in So i flashed it with another version of TWRP and I have done a missclick with it and downloaded one for Asus Not acer Now my phone dont even turn on , so to fix it i plugged it on the laptop and installed te qualcomm snapdragon drivers , My phone screen dont show anything he dont vibrate nothing just the charge led is On when i plug it , more than that when i plug it (after instaling drivers) Show me ''qualcomm hs-usb diagnostics 900E com10'' Instead of ''Qualcomm hs-usb QDloader 9008'' the phone has removable battery so i tried all te things i found on internet and XDA Forums I installed Qdloader one but no changes its always shown off By Diagnostics 900E one Then i can't flash it with QFIl I dont know what to do And Further more I can't turn it In Fastboot Mode or EDL One No changes are happening Its like a dead Phone
I'll apreciate Any help from You And sorry For my grammatical mistakes Im french
UP
UP
eyznec said:
I tried Flashing my acer liquid Z330 with a custom rom after installing TWRP the rom could not Flash in So i flashed it with another version of TWRP and I have done a missclick with it and downloaded one for Asus Not acer Now my phone dont even turn on , so to fix it i plugged it on the laptop and installed te qualcomm snapdragon drivers , My phone screen dont show anything he dont vibrate nothing just the charge led is On when i plug it , more than that when i plug it (after instaling drivers) Show me ''qualcomm hs-usb diagnostics 900E com10'' Instead of ''Qualcomm hs-usb QDloader 9008'' the phone has removable battery so i tried all te things i found on internet and XDA Forums I installed Qdloader one but no changes its always shown off By Diagnostics 900E one Then i can't flash it with QFIl I dont know what to do And Further more I can't turn it In Fastboot Mode or EDL One No changes are happening Its like a dead Phone
I'll apreciate Any help from You And sorry For my grammatical mistakes Im french
Click to expand...
Click to collapse
Hello and welcome to XDA-developers!
Since there is no information about harbricked Acer Z330 on XDA, I sugedt you put your question on Questions and Answers to see if any member has a solution for your problem.