Database Info

[Discontinued][Kernel][AOSP/LineageOS/MIUI] KaminariKernel R12 [04 March 2018]

This project is no longer being maintained. I'm no longer developing for the G1/G2 family.
KaminariKernel​
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now more void than it already was.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply grab my popcorn and laugh at you.
*
* Tl;dr: if your device crashes and burns, and if that gets you in trouble, it's entirely your fault. [STRIKE]Might be my fault as well, because I'm not a developer, but I don't care. lol[/STRIKE]
*/
Hiya fellas.
This is a sister project to my original (and ridiculously outdated) kernel for stock ROMs only. The version in this thread is the one designed to work with anything that isn't the stock firmware, i.e., AOSP, AospExtended, LineageOS, Resurrection Remix,... You name it. Even MIUI, which can be a b**** to get custom kernels supported on.
Features:
Sources & Optimizations
- Based on Lineage's shared falcon/peregrine/titan/thea sources
- Compiled with Linaro 4.9
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- MSM Hotplug
Click to expand...
Click to collapse
Extra CPU Governors
- Impulse
- Smartmax
- Yankactive
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- Simple GPU Algorithm
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- CPU Overclock (up to 1.6 GHz) (Overclocked version only)
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Unified Marshmallow & Nougat (CM/LineageOS 13 & 14.x)
Click to expand...
Click to collapse
Looking for previous releases?
Go here.
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- Reboot again and have fun!
Coming from another kernel which isn't mine? Don't worry, no need to dirty flash the ROM/kernel anymore. The install script now does all the dirty work for you.
If you wanna "tweak ALL the things", use Kernel Adiutor! (Synapse is NOT supported!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo
- Qualcomm/CodeAurora
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (AOSP/LineageOS, Falcon), Kernel for the Moto G
Contributors
kingkaminari
Source Code: https://github.com/Kamin4ri/KaminariKernel/
Kernel Special Features:
Version Information
Status: Abandoned
Current Stable Version: R12
Stable Release Date: 2018-03-04
Created 2016-01-13
Last Updated 2018-05-17

F.A.Q. (Read this before crying!!!!)
Q: Why did you develop this kernel?
A: Because I wanted to
Q: ERMAHGERD DIS KERNEL SUCKZ, MAH BATTERY IS DEAD IN 30 MINS, PLZ HALP!
A: When I created this kernel, I never had the intention to have it decrease battery life. So before / instead of complaining, go check your f***ing wakelocks and fix them! The kernel isn't responsible for this, your apps and/or services are.
Q: Will this kernel work on AOSP/CM12.1/CM13 ROMs?
A: Works on any ROM as long as it isn't stock . So yes, it does. AOSP, CM LineageOS, RR... Any of these.
Q: How do I report bugs?
A: If you wanna report a bug, then grab your kernel log - either by pulling /proc/last_kmsg (in case of a random reboot / kernel panic or oops) or copying the output of "dmesg" via shell - and paste it at pastie.org and link it in your post (or save it to a text file and attach it to your post). Don't bother getting logcats, they don't apply for kernel debugging purposes.
Q: How do I flash this?
A: I suggest you scroll up and read the OP. The instructions are there.
Q: How do I tweak this kernel?
A: Download Kernel Adiutor from the Play Store and have fun. No Synapse support!
Q: This kid is such a n00b!
A: Oh well then, why don't you go work on a kernel yourself, instead of criticizing my work and, by doing so, wasting your time?
Click to expand...
Click to collapse

Reserved

Reserved

Okay... Last reserved.

Our first test build is up! Link is at the OP.
It's still a very early test build and it may (and probably does) contain issues (serious or not). You've been warned.

This build should fix PowerHAL not being disabled.

Great work. Zero bugs in the short time since flashing. Thanks.

Hello King Kami Nari , , , Kami nari Kami Nari
What hotlplug is provides in your kernel ??
King Kami Nari

BhavikRB said:
Hello King Kami Nari , , , Kami nari Kami Nari
What hotlplug is provides in your kernel ??
King Kami Nari
Click to expand...
Click to collapse
MPDecision.

Sir King Kami Nari ,
Have you modified Interactive ?

kingkaminari said:
Created 2016-01-13
Last Updated 2016-01-12
Click to expand...
Click to collapse
Lol? xd
So far so good with the kernel thanks!

@kingkaminari Wow, finally! flashing it right now, thank you so much!
I hope to see the rest of the features present on 5.1 here on M and Thank you so much!

@kingkaminari
Will not let me change the minimum frequency of the CPU whenever I lay below 787 MHz to 5 minutes switches to the same, Tube to disable the "MPDecision" so that the frequency is not changed (sorry my english im use google traductor)

espaciox99 said:
Lol? xd
So far so good with the kernel thanks!
Click to expand...
Click to collapse
Yeah . There's this little derp with the dates lol

espaciox99 said:
@kingkaminari
Will not let me change the minimum frequency of the CPU whenever I lay below 787 MHz to 5 minutes switches to the same, Tube to disable the "MPDecision" so that the frequency is not changed (sorry my english im use google traductor)
Click to expand...
Click to collapse
Didn't have that problem here. My phone's minimum frequency stays at 300MHz all the time. Try another governor. And don't disable mpdecision

BhavikRB said:
Sir King Kami Nari ,
Have you modified Interactive ?
Click to expand...
Click to collapse
No. Interactive has been left untouched.

If you come from Hurtsky's Hybrid Kernel or Flashhhh's Optimus Kernel, don't forget to re-enable MPDecision - just rename /system/bin/mpdecisionbak to /system/bin/mpdecision.

kingkaminari said:
Didn't have that problem here. My phone's minimum frequency stays at 300MHz all the time. Try another governor. And don't disable mpdecision
Click to expand...
Click to collapse
Try and several governors and feel the same, the only solution is to disable "MPdecision"
EDIT: The problem is when you lock the phone, no matter how infrequently the minimum of changes to 787mhz cpu and if I turn off the mpdecision not happen

espaciox99 said:
Try and several governors and feel the same, the only solution is to disable "MPdecision"
EDIT: The problem is when you lock the phone, no matter how infrequently the minimum of changes to 787mhz cpu and if I turn off the mpdecision not happen
Click to expand...
Click to collapse
I actually was having a similar problem to this not long ago but not this particular kernel.
Just fooling around I found that if I flashed any kernel after rebooting system I would have the problem you described, however if I flashed the ROM, Gapps, and kernel in recovery all together before initial boot everything works as it should.
Not sure why this is but I have experimented and it is the only solution I have found so far.

[ROM][4.4.4][Stable][BETA-4][PORT][GT-S7392][KTU84Q]CyanogenMod 11

Cm-11 Stable For GT-S7392​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices But i have tested so no chance, dead SD cards is not my fault,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Downloads​
Most stable build for s7392 :- https://www.androidfilehost.com/?fid=24533103863138686
Custom upgraded kernel :- http://forum.xda-developers.com/and...ernel-kernel-3-5-7-unofficial-kyleve-t3411444
Need to change governor to perfomance so it will not lag
How to flash Or which one should i download ​1. Read this carefully you can find all answers here http://opensource591.github.io/flashing_guide/
Changelog​
Code:
1. Added apps2sd support
2. added more governor
3. fixed video recording
4. fixed video playback in stock browser
5. added more io schedulers
6. removed bg process limit so device not lags any more
7. Now takes less time to flash
8. Sim may work
9. fixed performance on first boot (But you should wait until that keyboard icon goes )
10. removed most of the governors and over clock so device not heats
11. Improved battery life
Not tested
Thanks To :-​For source:-​ @zim555 for device tree
For server:-​ @shu006
For support :-​ @berkant_kz for his support
@mac12m99
@tra_dax
XDA:DevDB Information
[ROM][4.4.4][Stable][BETA-4][PORT][GT-S7392][KTU84Q]CyanogenMod 11, ROM for all devices (see above for details)
Contributors
androidlover5842, zim555
Source Code: https://github.com/Grace5921?tab=repositories
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: JB 4.1.2
Based On: CyanogenMod
Version Information
Status: Beta
Current Stable Version: 4
Stable Release Date: 2016-04-04
Current Beta Version: 4
Beta Release Date: 2016-02-04
Created 2016-01-22
Last Updated 2016-04-04
Warning this rom is not for any other variant or device ​
GT-S7390 :- http://forum.xda-developers.com/android/development/rom-cyanogenmod-11-samsung-galaxy-trend-t3287959
GT-S7392L :- http://forum.xda-developers.com/and...trend-lite-t3360180/post66397441#post66397441

New build by my friends can be found here
If yes then try this new rom :- http://forum.xda-developers.com/android/development/rom-pac-rom-galaxy-trend-lite-duos-t3299029 with lot of features

Thanks dude, please can you inform me if your rom support dual sim?

spkprs said:
Thanks dude, please can you inform me if your rom support dual sim?
Click to expand...
Click to collapse
yes

spkprs said:
Thanks dude, please can you inform me if your rom support dual sim?
Click to expand...
Click to collapse
yes but you should be on my twrp before flashing

YES.....for first. sure i do for second, instaling...will be back soon.

spkprs said:
YES.....for first. sure i do for second, instaling...will be back soon.
Click to expand...
Click to collapse
ok thanks

Dude your rom all working perfect on s7392 DUOS i'm testing now for more.
Q: The Current CPU Frequency 999Mhz always, what settings(and Governor) i need to i set low 312 - max 999mhz and keep these settings;
i think after reboot they lost.
Q: OTA show =>available SR (version 3.4.5) This kernel has bug WiFi.....don't download it. It Have current Kernel version:3.4.5 Thu Jan 21, what i do;
Q:What is Last Updated 2016-01-22 from OP;
Thanks bro, relive my device.!

androidlover5842 said:
yes but you should be on my twrp before flashing
Click to expand...
Click to collapse
Not matter. Deleted.

spkprs said:
Dude your rom all working perfect on s7392 DUOS i'm testing now for more.
Q: The Current CPU Frequency 999Mhz always, what settings(and Governor) i need to i set low 312 - max 999mhz and keep these settings;
i think after reboot they lost.
Q: OTA show =>available SR (version 3.4.5) This kernel has bug WiFi.....don't download it. It Have current Kernel version:3.4.5 Thu Jan 21, what i do;
Q:What is Last Updated 2016-01-22 from OP;
Thanks bro, relive my device.!
Click to expand...
Click to collapse
i am trying to fix bug in that kernel but if you want to use it then you can ! that is amazing kernel . And for make sure you ticked set on boot before rebooting(In perfomance>processor menu)

kadjarT said:
Do not give wrong facts to members/users! All recoveries, which was builded by me, can flash this ROM too. Do not force the users to use your software!
Click to expand...
Click to collapse
i am not forcing them your twrp gives error status 7 this package is for kyleve

androidlover5842 said:
i am not forcing them your twrp gives error status 7 this package is for kyleve
Click to expand...
Click to collapse
Aha, sorry. You're right. This is kyleve. But you can add "kylevess" and "GT-S7390" assert in board config to make it compatible with my recoveries. I'll add "kyleve" and "GT-S7392" asserts for you recovery :good:

kadjarT said:
Aha, sorry. You're right. This is kyleve. But you can add "kylevess" and "GT-S7390" assert in board config to make it compatible with my recoveries. I'll add "kyleve" and "GT-S7392" asserts for you recovery :good:
Click to expand...
Click to collapse
ok i will add i will build twrp for you

Rotation sensor not work too me.

spkprs said:
Rotation sensor not work too me.
Click to expand...
Click to collapse
but it's working for me try to wipe data

androidlover5842 said:
ok i will add i will build twrp for you
Click to expand...
Click to collapse
I didn't mean TWRP. I meant OTA Asserts. https://github.com/Grace5921/android_device_kyleve/blob/cm-11.0/BoardConfig.mk#L19

androidlover5842 said:
but it's working for me try to wipe data
Click to expand...
Click to collapse
Wipe Data or wipe Cashe-Dalvik;.... i will lost all my apps!!

spkprs said:
Wipe Data or wipe Cashe-Dalvik;.... i will lost all my apps!!
Click to expand...
Click to collapse
yes you can use es file explorer to backup apps

Yahh!!! Simple restart and solved rotation!!
No keep CPU frequency, low-high is same 999mhz after tick-reboot.
Testing few days before install new kernel.
Thanks

spkprs said:
Yahh!!! Simple restart and solved rotation!!
No keep CPU frequency, low-high is same 999mhz after tick-reboot.
Testing few days before install new kernel.
Thanks
Click to expand...
Click to collapse
The kernel have some bugs, even after u tick the set on boot option still its the same, all the kernels made by us are experiencing the same problem, we are working on it and also on the WiFi bug, till then u can flash the first update of the kernel.
tra_dax

[KERNEL][3.5.7] kernel-3.5.7-UNOFFICIAL-kyleve

Custom kernel for Cm-11 Stable For GT-S7392​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices But i have tested so no chance, dead SD cards is not my fault,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
DOWNLOADS​ Android file host :- https://www.androidfilehost.com/?fid=24591000424944668
Over clocked 2.4 GHZ :- https://www.androidfilehost.com/?fid=24591000424948486
How to install :-
flash zip using lastest twrp
FEATURES​
1) Upgraded to 3.5.7 after very hard work(original was 3.4.5 ) .
2) Improved speed and boot time.
3) Improved gaming perfomance .
4) Nothing else for now .
BUGS​
1) report quickly if you found any
Thanks To :-
@zim555
@mac12m99
@berkantkz
@tra_dax
XDA:DevDB Information
[KERNEL][3.5.7] kernel-3.5.7-UNOFFICIAL-kyleve, Kernel for all devices (see above for details)
Contributors
androidlover5842
Source Code: https://github.com/Grace5921/android_kernel_kylevexx
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2016-07-05
Created 2016-07-05
Last Updated 2016-07-05

This kernel is ok No reboots or things like this. It's more like a stock kernel with improvments But I can see the difference between Phoneix (overclocked) and a non-overclocked kernel. (This is in first 5 min of using )
EDIT: I don't know what happening but after 5 min the phone begins run very smooth and amlost fast as with Phoneix kernel
Good job! ^_^

Wifi not working video play and record not working on s7390.

BusuDD said:
Wifi not working video play and record not working on s7390.
Click to expand...
Click to collapse
I had no problems like this on my device (GT-S7390- single sim variant) I had problems with wifi on 2.3GHz overclocked kernel, but with this my phone works ok ^_^
Try a clean install and see if it's happening again

i test this kernel no bug for me
good for performance without overheating:good:
but i use your 2.3 ghz kernel build for this device
2.3 ghz kernel works for me without any issue and bug
i compare both kernel in through play GTA SAN ANDREAS 2.3 ghz kernel is better
upgrade version is great for users that have issue with other kernel
please release a kernel for video performance that supports hw+ decoder :angel:
or build a se.user.infra overclocked kernel for 4.1.2 stock rom :angel:
thanks for your work i hit too
waiting for cm12 beta 3 for this device :fingers-crossed:
or build miui os for this device

don`t know how but it is faster than 2.3 ghz kernel
device got ultimate speed with it that overclock kernel does not get
device in awesome work after 5-10 minutes

can u build stock 4.1.2 based kernel similar like this kernel

rony raj said:
don`t know how but it is faster than 2.3 ghz kernel
device got ultimate speed with it that overclock kernel does not get
device in awesome work after 5-10 minutes
Click to expand...
Click to collapse
don't know this will improve your gaming perfomance or anything else but one thing i know is this may make you happy
2.4 GHZ kernel
https://www.androidfilehost.com/?fid=24591000424948486

thanks brother 2.4 ghz this is amazing
able to set speed of cpu
battery is efficient
want to use miui os
using carbon rom with your kernel

gaming experience going so far
able to play high end gaming with your kernel
boost the device
battery in standby mode improved

@androidlover5842
Thank you for this fan fantastic Room and Kernel!
i have 1 question: I am on Cm-11 beta 4 For GT-S7392 + Over clocked 2.4 GHZ kernel, do i need to change the governor to perfomance? or any other change on kernel settings?
ps. I just use the phone for UBER and car navigation.

@androidlover5842
Hey man, I work on different devices (gs4, note3) but am a HUGE streaming enthusiast. From the looks of your commits, the jump to 3.5 didn't seem to require too much fixing (compared to service release patches which are always a hassle). Out of curiosity, what made you stop at 3.5? I'm guessing arch-specific stuff as it needs a lot of updating between 3.4 and 3.10. Either way, very impressive project my friend!

Hello, will this kernel work on a single sim GT-S7390?
What should be the improvement respect to this kernel: https://forum.xda-developers.com/android/development/s7390-m99-custom-kernel-t3389192 ??
THanks! :cyclops:
F.

francewcoboc said:
Hello, will this kernel work on a single sim GT-S7390?
What should be the improvement respect to this kernel: https://forum.xda-developers.com/android/development/s7390-m99-custom-kernel-t3389192 ??
THanks! :cyclops:
F.
Click to expand...
Click to collapse
use it works for sure

rony raj said:
use it works for sure
Click to expand...
Click to collapse
WHat would be the improvement respect to that kernel I posted, which is the one I have installed?

francewcoboc said:
WHat would be the improvement respect to that kernel I posted, which is the one I have installed?
Click to expand...
Click to collapse
flash and test both and keep that suits you
PiXel 8

rony raj said:
flash and test both and keep that suits you
PiXel 8
Click to expand...
Click to collapse
Ok I'll try that. One question: is it ok to flash just the kernel, without re-flashing the rom? Can I roll back to the old one without re-flashing everything?

francewcoboc said:
Ok I'll try that. One question: is it ok to flash just the kernel, without re-flashing the rom? Can I roll back to the old one without re-flashing everything?
Click to expand...
Click to collapse
yes you can make a copy of any kernel zip like m99 kernel
now extract that zip in m99 folder you can create m99 folder
you find two things boot.img and system folder in m99 folder
open rom.zip using mixplorer on phone or 7z on pc
copy/extract boo.img and system/lib/modules to any folder
now replace the boot.img and modules folder in m99 folder
now zip the ( meta-inf system boot.img ) into archive and done
you make flashble old kernel zip to
go back old kernel flash this zip

How to know the current clockspeed in my phone? In settings>performance>processor it is still 999 max cpu frequency

[KERNEL][MIDO][MIUI] FLIP kernel [r1]

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now probably voided.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is this:
After tired of looking for stable no nonsense kernel for MIUI and couldn't fine one, I've decided to compile one myself. This is just a kernel I flipped from readily publicly available source, nothing special here. It should boot with any MIUI Nougat roms.
Click to expand...
Click to collapse
Difference with stock MIUI kernel
Compiled using OmniRom's kernel source as base so contains all its features, fixs and patches.
Compiled using UberTC 4.9.4 for stability.
Compiled using correct optimisation flags for our MSM8953 cpu.
Patched with EAS scheduler from OnePlus3 LineageOS-based kernel with EAS
Updated Ondemand cpu governor from franciscofranco's kernel for OnePlus3, finetuned it abit and made it as default booting cpu governor.
Default to Noop disk i/o scheduler on boot.
Default to Westwood tcp congestion control on boot.
Disabled/made as built-in some modules.
Disabled some stuff like zram, cleancache, zcache.
Added support for exfat fs via exfat-nofuse.
Enabled ntfs fs support.
Init.d startup script support with correct permissions applied on every boot.
Probably some other things I forgot to list here...
Click to expand...
Click to collapse
Changelog:
r1 - First public release.
Click to expand...
Click to collapse
Download:
FROM HERE
Click to expand...
Click to collapse
Installation notes:
Need unlocked bootloader, so unlock your bootloader if you haven't yet.
Need to be on any custom recovery so flash one if you haven't yet.
Need to be on any MIUI Nougat rom.
If you have any custom kernel other than this kernel already installed, please flash or restore your MIUI rom stock kernel because this kernel would need to use the stock unmodified ramdisk and custom kernel might already modify it.
Backup, backup and backup!
Download the zip, put into either internal phone storage or sdcard, flash away.
If you want to go back to your previous kernel, just dirty flash your rom or restore boot and system from backup.
Click to expand...
Click to collapse
Thanks to:
God, for everything.
Linus Torvalds, for the Linux kernel.
Google, for Android.
Xiaomi, for kernel source.
Xda forum, learnt alot from here.
Uber team, for the toolchain.
khan_frd2002, for the OmniRom kernel source.
EAS-Project on Github for the EAS patches.
franciscofranco, for the Ondemand cpu governor source.
osm0sis, for AnyKernel2 kernel installation template.
Probably some others I forgot to list here...
Click to expand...
Click to collapse
XDA:DevDB Information
FLIP kernel, Kernel for the Xiaomi Redmi Note 4
Contributors
coldplug
Source Code: https://github.com/thecoldplug/android_kernel_xiaomi_msm8953
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r1
Stable Release Date: 2018-01-11
Created 2018-01-11
Last Updated 2018-01-11

Wow. EAS working well ?

Kevin Saiza said:
Wow. EAS working well ?
Click to expand...
Click to collapse
Partially. Cpu governors meant to work with eas like sched and schedutil doesn't work well with 625 because it was meant to work with dual cluster a72+a53 like 820 etc, while 625 only have a single cluster of a53, plus theres no proper powertable. Sched and schedutil just froze at lowest available freq because it can't choose proper powertable, making phone lags. I've disable both and made ondemand as default governor.

I se the OP off this thread speaking about voltage values, is this what o are referring as power table?
https://forum.xda-developers.com/redmi-note-4/how-to/tweak-interactive-governor-tunables-t3608118

zecabra said:
I se the OP off this thread speaking about voltage values, is this what o are referring as power table?
https://forum.xda-developers.com/redmi-note-4/how-to/tweak-interactive-governor-tunables-t3608118
Click to expand...
Click to collapse
Similar. All cpu already got predefined voltage table in the kernel source for the usual hmp scheduler, usually modified for oc/uv. Eas need its own, new voltage table specifically written for it, for every specific cpu too.

tks for the nice kernel, I only have one request if possible, I'm more a guy of battery saving because i spent long times with no access to recharge the phone, its the implementation of alucard

add please function: fix ttl.
this is very important for Russia, Ukraine, Belarus ... and others.
this is necessary to bypass the blocking of cellular operators.
this is in the same kernel as: [KERNEL][MIDO] Stormguard 01/01/18, [KERNEL][MIDO][VOLTE++] Chewy kernel r8.1 [22/12].
Please

zecabra said:
tks for the nice kernel, I only have one request if possible, I'm more a guy of battery saving because i spent long times with no access to recharge the phone, its the implementation of alucard
Click to expand...
Click to collapse
If you mean alucard cpu governor, then I've already tried to add it lol. Doesn't work, endless reboot. In fact all interactive based cpu gov like impulse, alucard, blu_actice, zzmoove won't work here. Hence why I've disabled even the interactive cpu gov.

DEMIGOD124 said:
add please function: fix ttl.
this is very important for Russia, Ukraine, Belarus ... and others.
this is necessary to bypass the blocking of cellular operators.
this is in the same kernel as: [KERNEL][MIDO] Stormguard 01/01/18, [KERNEL][MIDO][VOLTE++] Chewy kernel r8.1 [22/12].
Please
Click to expand...
Click to collapse
Doesn't need to add or anything, its already in the kernel and enabled, i think...
I don't have any idea how it work or if it even work though, so do try and let me know how it goes.

FLIP-r1-MIUI-mido.zip Failed - Virus detected What???

pikachukaki said:
FLIP-r1-MIUI-mido.zip Failed - Virus detected What???
Click to expand...
Click to collapse
Lol your virus scanner might have detected the zip itself or the script within as a virus, its not. Gdrive where I've uploaded it should already scanned it before you even download.
Don't use that pos virus scanner, change to other virus scanner or better yet, use linux ?

So witch one is better for miui and why ?

kcal bugg still there?

kemo12533 said:
So witch one is better for miui and why ?
Click to expand...
Click to collapse
Theres only one...
aman1241 said:
kcal bugg still there?
Click to expand...
Click to collapse
Haven't add kcal.

coldplug said:
Theres only one...
Haven't add kcal.
Click to expand...
Click to collapse
I mean this one Vs stock
I am not really into the kernel thing and wanna know what will I get from this one VS the stock in a sample do novas like me will get what all this futures for ?

kemo12533 said:
I mean this one Vs stock
I am not really into the kernel thing and wanna know what will I get from this one VS the stock in a sample do novas like me will get what all this futures for ?
Click to expand...
Click to collapse
Already wrote all the differences on the first post. Can't really say whats good amd whats not due difference usage and needs, but do try and see for yourself. Backup before install, restore if you're not happy ?

coldplug said:
Already wrote all the differences on the first post. Can't really say whats good amd whats not due difference usage and needs, but do try and see for yourself. Backup before install, restore if you're not happy ?
Click to expand...
Click to collapse
i am on pixel experience right now so i cant atm but i will soon

Hi
Where is the link?

Overclock
Can I overclock my cpu and gpu on this kernel ??

I feel stock is better
I feel as so cause after switching to this kernel my phone is a bit more Laggy so I switched back to stock

Shh.. good game

GG

Reserved
GG

Stuck on boot logo.

naveediftikhar said:
Stuck on boot logo.
Click to expand...
Click to collapse
Mention rom

not boot on miuipro ,stuck on splash screen

xdarkstar said:
Mention rom
Click to expand...
Click to collapse
Xiaomu.eu..

MIUI - WIP, read before posting.

flashed the kernel on HAVOC 2.2 622019 build
booted and working so far so good!
will check
1. sound mods in mixerpath over this kernel since there is NO SOUND CONTROL in Kernel Auditor
2. battery performance
3. whatsapp and voice call random reboots (found in oreo )

Anyone try it on pixel experience rom?

alreadyregistered said:
MIUI - WIP, read before posting.
Click to expand...
Click to collapse
Wip listing went on after we reported.

Pixel experience
matane said:
Anyone try it on pixel experience rom?
Click to expand...
Click to collapse
if it works, but I just built an unofficial build with the latest jhenrique changes, in addition to adding the pre-installed kernel, also has the Thermal Hal of Miui on the device tree, which has much better temperature control, if you want I can share the link

Good kernel thx

R3 it's OUT!
New build it's UP!
R3 changelog:
* Miui support
* Pm/devfreq fixes
* Q6dspv2 patches
* Westwood tcp enabled
* SoundControl
* A lot of CFQ improvements and fixes
* DTS support
* Now power efficient wq can be enabled (disabled by default)
* Implement power efficient wq on subsystem (wifi, display, thermal, sound and others)
* Some caf patches
* Other things (fixes/improvements)
Click to expand...
Click to collapse
Download link on first post!

R3 works.. boots at least.. nice work.. will test and report.. btw i flashed my stock boot img before flashing the kernel from insignuix.. not that itll help but tried to keep all ends under control. Can u tell me how to enable power efficient wq?

naveediftikhar said:
R3 works.. boots at least.. nice work.. will test and report.. btw i flashed my stock boot img before flashing the kernel from insignuix.. not that itll help but tried to keep all ends under control. Can u tell me how to enable power efficient wq?
Click to expand...
Click to collapse
Enable it with Kernel Adiutor on CPU tab, search for "Schedule workqueues on awake CPUs........"

Nice battery and lightning fast. This and insigniux are my favourite kernels.

One of best kernels
Simple,smooth,battery good,no otg bug which was on derp.
Me testing as you know in btlg and prolly will release update with your Kernel :laugh:

Adi5 said:
One of best kernels
Simple,smooth,battery good,no otg bug which was on derp.
Me testing as you know in btlg and prolly will release update with your Kernel :laugh:
Click to expand...
Click to collapse
Working? What about betery backup???

Ok just an early single day review..
Good battery life
Snappy
Sound is a bit low but that could be me.
No crashes as yet.

This kernel is seriously underrated, great performance and battery life, no stability issues I found yet