GG
Reserved
GG
Stuck on boot logo.
naveediftikhar said:
Stuck on boot logo.
Click to expand...
Click to collapse
Mention rom
not boot on miuipro ,stuck on splash screen
xdarkstar said:
Mention rom
Click to expand...
Click to collapse
Xiaomu.eu..
MIUI - WIP, read before posting.
flashed the kernel on HAVOC 2.2 622019 build
booted and working so far so good!
will check
1. sound mods in mixerpath over this kernel since there is NO SOUND CONTROL in Kernel Auditor
2. battery performance
3. whatsapp and voice call random reboots (found in oreo )
Anyone try it on pixel experience rom?
alreadyregistered said:
MIUI - WIP, read before posting.
Click to expand...
Click to collapse
Wip listing went on after we reported.
Pixel experience
matane said:
Anyone try it on pixel experience rom?
Click to expand...
Click to collapse
if it works, but I just built an unofficial build with the latest jhenrique changes, in addition to adding the pre-installed kernel, also has the Thermal Hal of Miui on the device tree, which has much better temperature control, if you want I can share the link
Good kernel thx
R3 it's OUT!
New build it's UP!
R3 changelog:
* Miui support
* Pm/devfreq fixes
* Q6dspv2 patches
* Westwood tcp enabled
* SoundControl
* A lot of CFQ improvements and fixes
* DTS support
* Now power efficient wq can be enabled (disabled by default)
* Implement power efficient wq on subsystem (wifi, display, thermal, sound and others)
* Some caf patches
* Other things (fixes/improvements)
Click to expand...
Click to collapse
Download link on first post!
R3 works.. boots at least.. nice work.. will test and report.. btw i flashed my stock boot img before flashing the kernel from insignuix.. not that itll help but tried to keep all ends under control. Can u tell me how to enable power efficient wq?
naveediftikhar said:
R3 works.. boots at least.. nice work.. will test and report.. btw i flashed my stock boot img before flashing the kernel from insignuix.. not that itll help but tried to keep all ends under control. Can u tell me how to enable power efficient wq?
Click to expand...
Click to collapse
Enable it with Kernel Adiutor on CPU tab, search for "Schedule workqueues on awake CPUs........"
Nice battery and lightning fast. This and insigniux are my favourite kernels.
One of best kernels
Simple,smooth,battery good,no otg bug which was on derp.
Me testing as you know in btlg and prolly will release update with your Kernel :laugh:
Adi5 said:
One of best kernels
Simple,smooth,battery good,no otg bug which was on derp.
Me testing as you know in btlg and prolly will release update with your Kernel :laugh:
Click to expand...
Click to collapse
Working? What about betery backup???
Ok just an early single day review..
Good battery life
Snappy
Sound is a bit low but that could be me.
No crashes as yet.
This kernel is seriously underrated, great performance and battery life, no stability issues I found yet
Related
Welcome to wilson3q's CM12 Unoffical Build!
I don't own a n7100, please help to test.
Disclaimer: I take no responsibility for bad things that happen as a result of flashing this.
All are pretty standard cm12 stuffs, except those patches I applied on top of them.
[Download]
ROM (please don't mirror)
build - 20150306
Gapp:
http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
Recommended launcher:
Nova Launcher (really like its JB zoom app animation, hate L slide up animation)
Recommended theme:
Deep Darkness
[Flashing Guide]
1. Reboot to CWM/TWRP recovery
2. Flash ROM zip file
3. Flash Gapps
4. Reboot
* Wipe data first if you come from another rom *
* Newer boot loader, modem and recovery is highly recommended (don't use twrp 2.8.4, use 2.8.1 instead) *
* No other kernel will be supported, use the stock one, for your best experiences too *
[Patches]
My additional patches over cm12 includes:
Enhancements and bug fixes cherry-picked from other ROMs, including Slim LP, Nameless, LiquidSmooth
SaberMod for ROM and kernel
O3, JustArchi optimization
Added Boeffla sound engine 1.67 (Get Boeffla Sound app to enable)
Added CPU governor zzmoove, smartassv2, savagedzen
Video playback forward/backward fix
Removed all kernel debuging stuffs
Fixed keyboard not showing up during setup wizard
Fixed Camera issue
Fixed Day Dream
Fixed Netflix streaming (one more reboot needed after installation of Netflix)
Fixed audio
Enabled Multi-user
LMK minfree tweaks
Misc tweaks
Changed DPI to 280
more...
For better experience, change Nova animation/scroll speed to Fast...
[Known Bugs]
I am not sure what issues you will get, but one thing is for sure: YOUR PHONE WILL FLY!
chrome glitch: type chrome://flags as URL and disable GPU thank @bigmarv31)
Thank cm team for the amazing ROM.
Special thanks to: @DerTeufel1980, @sbrissen, @rogersb11, @TheBr0ken...
Please help to test if baseband issue is fixed or not...
Thanks
Welcome on board mate
Awesome buddy one more flawless rom for our device....gr8 @wilson3q
Great news! I can't wait to try it! Thanks
20150227 build does not boot
mimmo13 said:
20150227 build does not boot
Click to expand...
Click to collapse
Clean install?
Logcat...plz.
wilson3q said:
Clean install?
Logcat...plz.
Click to expand...
Click to collapse
Clean install.... bootloop...
@wilson3q after note 2 logo, i have black screen and after 2/3 mins, the phone reboots.
Sorry , but i'm not able to do a logcat.
wilson3q said:
Clean install?
Logcat...plz.
Click to expand...
Click to collapse
Disable selinux, in kernel and make the trees permissive, refer to nameless git for the same. You kernel is crashing at boot, that's why logcat, dmesg or a kmsg is a no go.
̿ ̿̿’̿’\̵͇̿̿\з==(*͡° ͜ʖ ͡°)==ε/̵͇̿̿/’̿’̿ ̿ ̿̿*
Welcome on board !
Please tell us call recorder could works and loud with this rom !
KNIGHT97 said:
Disable selinux, in kernel and make the trees permissive, refer to nameless git for the same. You kernel is crashing at boot, that's why logcat, dmesg or a kmsg is a no go.
̿ ̿̿’̿’\̵͇̿̿\з==(*͡° ͜ʖ ͡°)==ε/̵͇̿̿/’̿’̿ ̿ ̿̿*
Click to expand...
Click to collapse
Already disabled..
Hard If no Logcat...
Can u try to use another kernel? See if any other issues...
I will look at the kernel again..
I tried with purecm and it seems to boot.
Edit: No Baseband
NisseCool said:
I tried with purecm and it seems to boot.
Edit: No Baseband
Click to expand...
Click to collapse
Ohh then dwnld and flash one from Androidwizzards thread...u will get BB working
Okay
New build up...
Try to see if can boot...
wilson3q said:
New build up...
Try to see if can boot...
Click to expand...
Click to collapse
It does boot.
nvm. It starts rebooting after it gets to setup wizard.
NisseCool said:
It does boot.
nvm. It starts rebooting after it gets to setup wizard.
Click to expand...
Click to collapse
Logcat?
Yannn said:
Welcome on board !
Please tell us call recorder could works and loud with this rom !
Click to expand...
Click to collapse
Not sure...I don't have a device to try.
thanks man! i'm gonna try it!
---------- Post added at 01:12 AM ---------- Previous post was at 01:05 AM ----------
[email protected] said:
Ohh then dwnld and flash one from Androidwizzards thread...u will get BB working
Click to expand...
Click to collapse
I have no baseband too.
Where i can find Androidwizard thread?
This project is no longer being maintained. I'm no longer developing for the G1/G2 family.
KaminariKernel
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now more void than it already was.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply grab my popcorn and laugh at you.
*
* Tl;dr: if your device crashes and burns, and if that gets you in trouble, it's entirely your fault. [STRIKE]Might be my fault as well, because I'm not a developer, but I don't care. lol[/STRIKE]
*/
Hiya fellas.
This is a sister project to my original (and ridiculously outdated) kernel for stock ROMs only. The version in this thread is the one designed to work with anything that isn't the stock firmware, i.e., AOSP, AospExtended, LineageOS, Resurrection Remix,... You name it. Even MIUI, which can be a b**** to get custom kernels supported on.
Features:
Sources & Optimizations
- Based on Lineage's shared falcon/peregrine/titan/thea sources
- Compiled with Linaro 4.9
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- MSM Hotplug
Click to expand...
Click to collapse
Extra CPU Governors
- Impulse
- Smartmax
- Yankactive
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- Simple GPU Algorithm
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- CPU Overclock (up to 1.6 GHz) (Overclocked version only)
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Unified Marshmallow & Nougat (CM/LineageOS 13 & 14.x)
Click to expand...
Click to collapse
Looking for previous releases?
Go here.
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- Reboot again and have fun!
Coming from another kernel which isn't mine? Don't worry, no need to dirty flash the ROM/kernel anymore. The install script now does all the dirty work for you.
If you wanna "tweak ALL the things", use Kernel Adiutor! (Synapse is NOT supported!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo
- Qualcomm/CodeAurora
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (AOSP/LineageOS, Falcon), Kernel for the Moto G
Contributors
kingkaminari
Source Code: https://github.com/Kamin4ri/KaminariKernel/
Kernel Special Features:
Version Information
Status: Abandoned
Current Stable Version: R12
Stable Release Date: 2018-03-04
Created 2016-01-13
Last Updated 2018-05-17
F.A.Q. (Read this before crying!!!!)
Q: Why did you develop this kernel?
A: Because I wanted to
Q: ERMAHGERD DIS KERNEL SUCKZ, MAH BATTERY IS DEAD IN 30 MINS, PLZ HALP!
A: When I created this kernel, I never had the intention to have it decrease battery life. So before / instead of complaining, go check your f***ing wakelocks and fix them! The kernel isn't responsible for this, your apps and/or services are.
Q: Will this kernel work on AOSP/CM12.1/CM13 ROMs?
A: Works on any ROM as long as it isn't stock . So yes, it does. AOSP, CM LineageOS, RR... Any of these.
Q: How do I report bugs?
A: If you wanna report a bug, then grab your kernel log - either by pulling /proc/last_kmsg (in case of a random reboot / kernel panic or oops) or copying the output of "dmesg" via shell - and paste it at pastie.org and link it in your post (or save it to a text file and attach it to your post). Don't bother getting logcats, they don't apply for kernel debugging purposes.
Q: How do I flash this?
A: I suggest you scroll up and read the OP. The instructions are there.
Q: How do I tweak this kernel?
A: Download Kernel Adiutor from the Play Store and have fun. No Synapse support!
Q: This kid is such a n00b!
A: Oh well then, why don't you go work on a kernel yourself, instead of criticizing my work and, by doing so, wasting your time?
Click to expand...
Click to collapse
Reserved
Reserved
Okay... Last reserved.
Our first test build is up! Link is at the OP.
It's still a very early test build and it may (and probably does) contain issues (serious or not). You've been warned.
This build should fix PowerHAL not being disabled.
Great work. Zero bugs in the short time since flashing. Thanks.
Hello King Kami Nari , , , Kami nari Kami Nari
What hotlplug is provides in your kernel ??
King Kami Nari
BhavikRB said:
Hello King Kami Nari , , , Kami nari Kami Nari
What hotlplug is provides in your kernel ??
King Kami Nari
Click to expand...
Click to collapse
MPDecision.
Sir King Kami Nari ,
Have you modified Interactive ?
kingkaminari said:
Created 2016-01-13
Last Updated 2016-01-12
Click to expand...
Click to collapse
Lol? xd
So far so good with the kernel thanks!
@kingkaminari Wow, finally! flashing it right now, thank you so much!
I hope to see the rest of the features present on 5.1 here on M and Thank you so much!
@kingkaminari
Will not let me change the minimum frequency of the CPU whenever I lay below 787 MHz to 5 minutes switches to the same, Tube to disable the "MPDecision" so that the frequency is not changed (sorry my english im use google traductor)
espaciox99 said:
Lol? xd
So far so good with the kernel thanks!
Click to expand...
Click to collapse
Yeah . There's this little derp with the dates lol
espaciox99 said:
@kingkaminari
Will not let me change the minimum frequency of the CPU whenever I lay below 787 MHz to 5 minutes switches to the same, Tube to disable the "MPDecision" so that the frequency is not changed (sorry my english im use google traductor)
Click to expand...
Click to collapse
Didn't have that problem here. My phone's minimum frequency stays at 300MHz all the time. Try another governor. And don't disable mpdecision
BhavikRB said:
Sir King Kami Nari ,
Have you modified Interactive ?
Click to expand...
Click to collapse
No. Interactive has been left untouched.
If you come from Hurtsky's Hybrid Kernel or Flashhhh's Optimus Kernel, don't forget to re-enable MPDecision - just rename /system/bin/mpdecisionbak to /system/bin/mpdecision.
kingkaminari said:
Didn't have that problem here. My phone's minimum frequency stays at 300MHz all the time. Try another governor. And don't disable mpdecision
Click to expand...
Click to collapse
Try and several governors and feel the same, the only solution is to disable "MPdecision"
EDIT: The problem is when you lock the phone, no matter how infrequently the minimum of changes to 787mhz cpu and if I turn off the mpdecision not happen
espaciox99 said:
Try and several governors and feel the same, the only solution is to disable "MPdecision"
EDIT: The problem is when you lock the phone, no matter how infrequently the minimum of changes to 787mhz cpu and if I turn off the mpdecision not happen
Click to expand...
Click to collapse
I actually was having a similar problem to this not long ago but not this particular kernel.
Just fooling around I found that if I flashed any kernel after rebooting system I would have the problem you described, however if I flashed the ROM, Gapps, and kernel in recovery all together before initial boot everything works as it should.
Not sure why this is but I have experimented and it is the only solution I have found so far.
Hi guys,
I know that this forum is not widely used by ZTE Axon 7 Mini owners, but I still want to share my work the kernel used by the stock firmware.
Most of the parts were of course already based on the work of others, so I will give credits at the end of this thread of course.
Pre-requisites:
Unlocked bootloader
TWRP flashed
Knowledge you do this all at your own risk! I tested this kernel with my EU model, so I don't know if this will work on the US models, too.
Features:
- Based on latest kernel source shared by ZTE (ZTE B2017G Nougat(7.1.1) Kernel(3.10.84))
- Built with GCC 4.9 toolchain
- UC to 499MHz for BIG and 403 MHz for LITTLE (thanks to @flar2)
- OC to 1651 for BIG (again @flar2)
- Additional governors: yankactive, blu-active, impulse
- Additional IO schedulers: Sioplus, Zen, FIOPS. Tweaked Row is set as default
- Additional TCP congestion algorithms with westwood being the default one
- Approx. 30% faster due to CRC calculation and auditing disabling
- Sweep2Sleep on the navigation bar
- frandom RNG
- Sound Control by @flar2
- ZRAM using LZ4 optimized for ARM by default
- Optimized power management driver by @Yank555
- Native exFAT support without needing fuse @dorimanx)
- KCAL
- Vibration control
- uses higher power CPUs to boot (got roughly 3s faster boot time)
- Dynamic Fsync
- Gentle Fair sleepers can be toggled via sysfs and Kernel Adiutor
- Smaller tweaks
To do:
- Switch toolchain
- Remove "dirty" from the kernel name Apparently I need to push all changes to github before compiling(or recompiling the same kernel as soon as I pushed everything)
- Set the phone to accept the lower frequencies without having to set this up in Kernel adiutor
- Alter interactive governor to use full frequency range
- Add D2TS for screen and fingerprint sensor, S2W
- Wakelock reductions
- Maybe BLX, KCAL (even though I don't get the point to implement it) I was curious and did it now, looks nice
- LED and vibration control
- Switch hotplugging mechanism to Lazyplug, hotplugging is not that energy efficient anymore
See the attached picture regarding the CPU stats when using yankactive for example
Credits go to:
@Lord Boeffla @flar2 @dorimanx @Yank555
Unfortunately I didn't give proper credits on my github, I want everyone to know, that none of the features were designed and written by myself, just adapted to work on our phones!
Download here:
https://drive.google.com/drive/folders/0B0mn6OUqIDzBZG1DM1Y4dmxUV2c
Flash in TWRP, root and every other ramdisk modification will be preserved (Anykernel2 by osmosis)
Github:
https://github.com/TheSSJ/tulip_kernel
Changelog
V1.1: Initial version for public release!
V1.2: KCAL support
V1.3: Changed boot CPUs to higher power ones, added dynamic Fsync, added Quick Wakeup driver
V1.4: Gentle Fair Sleepers can be toggled now, ROW scheduler tweaked
NOTE: in case anyone is wondering why I didn't pick the DevDB projects: as our device is not activated to be used with DevDB, I went with normal threads
TheSSJ said:
V1.1: Initial version for public release!
NOTE: in case anyone is wondering why I didn't pick the DevDB projects: as our device is not activated to be used with DevDB, I went with normal threads
Click to expand...
Click to collapse
Hi! Amazing work! Thx for the job.
Can I use this kernel with AOKP? AOKP has android 7.1.2
Askael said:
Hi! Amazing work! Thx for the job.
Can I use this kernel with AOKP? AOKP has android 7.1.2
Click to expand...
Click to collapse
I wouldn't exclude this, but as I am running on stock, I can't confirm or deny...
You could make a backup of your boot and flash it and see what happens, worst thing is that you need to reboot to recovery and restore your backup
TheSSJ said:
V1.1: Initial version for public release!
NOTE: in case anyone is wondering why I didn't pick the DevDB projects: as our device is not activated to be used with DevDB, I went with normal threads
Click to expand...
Click to collapse
TheSSJ said:
I wouldn't exclude this, but as I am running on stock, I can't confirm or deny...
You could make a backup of your boot and flash it and see what happens, worst thing is that you need to reboot to recovery and restore your backup
Click to expand...
Click to collapse
Thank you for replay, what governor you use?
You will need to try and see.
It uses anykernel which is good. But aokp and lineage are on android 7.1.2 while stock is on android 7.1.1. There was at least one kernel api change that may cause problems. But I'm not sure.
I'm assuming this package has the wlan module also...?
Askael said:
Hi! Amazing work! Thx for the job.
Can I use this kernel with AOKP? AOKP has android 7.1.2
Click to expand...
Click to collapse
@ssj @tdm
Guys, try flash kernel, AOKP, don't work.
W8 kernel version from customs
tdm said:
I'm assuming this package has the wlan module also...?
Click to expand...
Click to collapse
You mean the prima wifi stuff I have seen in you github? Honestly I didn't feel the need...does it improve the wifi experience or is it just for making it compatible with LineageOS?
No, I mean the kernel module for wifi, /system/lib/modules/pronto/pronto_wlan.ko. If that doesn't match your kernel, it won't load and you won't have wifi.
Note stock has a handful of other kernel modules, but I don't think any of them are needed Most look like they are for testing.
TheSSJ said:
You mean the prima wifi stuff I have seen in you github? Honestly I didn't feel the need...does it improve the wifi experience or is it just for making it compatible with LineageOS?
Click to expand...
Click to collapse
tdm said:
No, I mean the kernel module for wifi, /system/lib/modules/pronto/pronto_wlan.ko. If that doesn't match your kernel, it won't load and you won't have wifi.
Note stock has a handful of other kernel modules, but I don't think any of them are needed Most look like they are for testing.
Click to expand...
Click to collapse
Oh, ok...pronto driver is built into the kernel though, all other modules are really for debugging and testing as far as I could gather, so they are not included (and the phone works fine)
@Askael: As for a custom kernel for Lineage/AOKP etc: as I won't have these OS's on my phone I use as my daily driver, I can of course create one, but it is always published as untested, so there is no point IMHO.
TheSSJ said:
Oh, ok...pronto driver is built into the kernel though, all other modules are really for debugging and testing as far as I could gather, so they are not included (and the phone works fine)
@Askael: As for a custom kernel for Lineage/AOKP etc: as I won't have these OS's on my phone I use as my daily driver, I can of course create one, but it is always published as untested, so there is no point IMHO.
Click to expand...
Click to collapse
But we can test this. But if you not want - don't worry! :good:
Askael said:
But we can test this. But if you not want - don't worry! :good:
Click to expand...
Click to collapse
Will think about it
Version 1.2 is out, now with KCAL screen control support!
I'm building a kernel with many of these features for the LineageOS ROM. Want me to make a thread, and then you can link it for people interested in using it in your OP? Source is here: https://github.com/djkazic/sombrax_kernel
kevincai96 said:
I'm building a kernel with many of these features for the LineageOS ROM. Want me to make a thread, and then you can link it for people interested in using it in your OP? Source is here: https://github.com/djkazic/sombrax_kernel
Click to expand...
Click to collapse
Hi,
Feel free to open a new thread it is important to push this phone amd its potential as good as possible!
Development will go on, i still have some items to implement :good:
@TheSSJ
Hi! Any news about update?
@TheSSJ
Good to see you in Axon mini from zenfone 2
Askael said:
@TheSSJ
Hi! Any news about update?
Click to expand...
Click to collapse
You mean a custom kernel for CM builds or an update for this stock kernel?
For the CM based one I didn't start, although applying the modifications I applied to my kernel should be working
Druboo666 said:
@TheSSJ
Good to see you in Axon mini from zenfone 2
Click to expand...
Click to collapse
I was spotted It's a great phone, let's get the most out of it
TheSSJ said:
You mean a custom kernel for CM builds or an update for this stock kernel?
For the CM based one I didn't start, although applying the modifications I applied to my kernel should be working
I was spotted It's a great phone, let's get the most out of it
Click to expand...
Click to collapse
For this stok kernel
I was spotted It's a great phone, let's get the most out of it
Click to expand...
Click to collapse
i am using Axon 7 and yeah its a great phone i must miss you in axon 7
Updated version uploaded and available on G-Drive, boot time increased by 3s (you take what you can get )
/EDIT: Next version out, small enhancements and adding the possibility to enable/disable gentle fair sleepers
IceCold Kernel
IceCold Kernel is a basic kernel for whyred (Redmi Note 5) that contains some special features and aims for best balance between performance and battery.
Features included
- Rebased to pie kernel source and caf base
- Merged Latest CAF Tag
- Implemented EAS (EM by tytydraco)
- top-app stune boost hardcoded to 1
- NTFS support
- Timer tick rate 80Hz
- Many things added to power efficient workqueue
- Update TAS2557
- schedutil default governor
- Sound control
- More sound improvements
- DTS Support
- Anxiety default I/O scheduler
- HDR support
- Charging Limiter
- Night Charge
- Use lpm parameters of sdm845
- Rapid GC for f2fs
- Simple Thermal
- Only wake GPU when needed (not on touch)
- TCP improvements
- Per-Process reclaim
- Remove debugfs
- Nearly complete VLA free
- Remove inefficient frequencies
- Simple Low Memory Killer
- Enable Idle Dynticks
- Other under the hood stuff
How to install DTS Sound mod
Credits to the developer and "porter" of this awesome sound mod
Issues
U tell me (got no issues with it, pretty stable)
Support
I only support Custom ROMs... It is working on MIUI but I won't fix issues for MIUI! (As example Kernelversion shows unavailable)
Also it's confirmed to work too on Mi6x (Wayne) but i won't support it officially because i don't own this device!
FlashingMake sure u backup ur current Kernel before flashing! I'm not taking responsibility for any damage!
If you installed a custom Kernel before please flash the boot.img of the currently installed ROM or dirty flash the ROM (I prefer dirty flashing)
Then just flash the zip file through TWRP...
And have fun with the full "IceCold Experience"
Download
Stable Builds
TestBuilds will be only available in Telegram Group!
If there are any questions, hints or something like that feel free to post them!
Or join Telegram Group
https://t.me/IceColdKernel
Credits:
srfarias - for the caf base
tytdraco- for his energy model
uvera - Helped implementing simple thermal
kerneltoast - for many improvements
kdrag0n - also many improvements
Information
IceCold Kernel for Redmi Note 5 Pro (aka whyred)
Contributors
lexx.ps (PrimoDev23)
Source Code: https://github.com/PrimoDev23/kernel_xiaomi_whyred
Version Information
Status: Stable Release
Created 2019-01-23
Last Updated 2019-06-26
I can confirm!!! The kernel is 100% working on mi 6x(Wayne) with F2FS.
Tnks..
ARNOB XENON said:
I can confirm!!! The kernel is 100% working on mi 6x(Wayne) with F2FS.
Tnks..
Click to expand...
Click to collapse
Ty for testing
Added the information in the thread
Can f2fs work with Xiaomi.eu or other miui roms?
kostas gp said:
Can f2fs work with Xiaomi.eu or other miui roms?
Click to expand...
Click to collapse
rom nees to support this as well as twrp and kernel.. theres one miui rom named Kosmos that supports f2fs
https://www.youtube.com/watch?v=x7RKyAd-scE
ARNOB XENON said:
I can confirm!!! The kernel is 100% working on mi 6x(Wayne) with F2FS.
Tnks..
Click to expand...
Click to collapse
W8 xd
How could u test? Anykernel will not install on wayne, it will cancel...
I didn't made the installer script compatible with wayne yet
Edit: Uploaded a stable version with some patches i've got working, should be smooth.
Also added wayne in the installer script so wayne users can flash it!
Keep in mind I don't officially support it
Good that you decided to start your own topic!
raptorddd said:
rom nees to support this as well as twrp and kernel.. theres one miui rom named Kosmos that supports f2fs
https://www.youtube.com/watch?v=x7RKyAd-scE
Click to expand...
Click to collapse
Thanks for answering
lexx.ps said:
W8 xd
How could u test? Anykernel will not install on wayne, it will cancel...
I didn't made the installer script compatible with wayne yet
Edit: Uploaded a stable version with some patches i've got working, should be smooth.
Also added wayne in the installer script so wayne users can flash it!
Keep in mind I don't officially support it
Click to expand...
Click to collapse
wired problem on wayne after reboot audio port is not working
ARNOB XENON said:
wired problem on wayne after reboot audio port is not working
Click to expand...
Click to collapse
As I mentioned I don't support this device. Try wiping cache and dalvik.
Reboot again won't fix?
Normal audio working?
BT-Audio working?
Otherwise I can't help u because i only have whyred and not wayne.
lexx.ps said:
As I mentioned I don't support this device. Try wiping cache and dalvik.
Reboot again won't fix?
Normal audio working?
BT-Audio working?
Otherwise I can't help u because i only have whyred and not wayne.
Click to expand...
Click to collapse
From 1st boot every thing works all audio after a reboot only headphone is not detecting.
ARNOB XENON said:
From 1st boot every thing works all audio after a reboot only headphone is not detecting.
Click to expand...
Click to collapse
Tried wiping caches?
I think it won't help but it's worth a try i think, else u have to switch kernel (eventually I will find a fix for it later)
Awesome kernel. Smooth for pubg..
alvinrs said:
Awesome kernel. Smooth for pubg..
Click to expand...
Click to collapse
It really is? Heard it has some issues on pubg
Edit: Should work, working on an update and trying some things
lexx.ps said:
Thanks for answering
Click to expand...
Click to collapse
is fsync enabled or disabled .?
raptorddd said:
is fsync enabled or disabled .?
Click to expand...
Click to collapse
Should be enabled, not sure but find it no where in config
Updated some Informations in OP!
thx for your work, there is no way to apply some configs on cpu section - kernel auditor?
EDIT: Nevermind, I was trying to change the settings on the schedutil governor.
Keep the good work, thx!
Is it this undervolt kernel stable ? I mean will it cause data loss (bootloop) or Sleep Of Death ? Thanks
Ale uto said:
Is it this undervolt kernel stable ? I mean will it cause data loss (bootloop) or Sleep Of Death ? Thanks
Click to expand...
Click to collapse
No it's fine, using it myself and never got bootloop or any problem with it
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Phizero kernel j4+ for all non-stock ROMS i.e custom roms,gsi....
Kernel features:
Compiled with Bleeding edge toolchain GCC 9.1
Upstreamed to Linux 3.18.140
Enabled lower frequencies 345, 499, 729, and 844mhz
Undervolt lower clocks ONLY! for better battery without performance loss
Disable CRC for about 30% performance boost
GPU overclocked to 650Mhz
Security and other under the hood improvements
Changelog for v2.0 2019-08-17
Increased charge current to 1.6A on AC and 1A on USB for faster charging
Use 300Hz base timer frequency
Add KCAL - Advanced color control for Qualcomm MDSS (RGB calibration and post-processing features)
Add KLAPSE live-display module support (v5.0)
Rework underclock : remove inefficient frequencies set minimum 652mhz
Add Cpu Overclock to 1.65ghz and define voltages
Rework interactive governor scaling parameters
Added Boeffla wakelock blocker v1.1
FS fsync toggle on/off
Disable Samsung Knox,tima etc
Disable lots of debugging for some improvement
Export max charge current to lock screen (fixes missing charge current info on custom ROMs)
Enable CONFIG_WQ_POWER_EFFICIENT_DEFAULT
Revert to GCC 4.9 Tool-chain
Link for kernel (v1.0)
https://mega.nz/#!N0xAEIjQ!QriScEX0_rsWcx6pu6wDii9S5Xj5-tiapUxxikDQM6I
Link for kernel (v2.0)-2019-08-17
https://mega.nz/#!pwYXVQhK!bxUJgXD_GPl6f9TkD30z25na57aSWxeoUJnD5Y6Mo2s
Installation
1.Flash kernel in twrp (based on any kernel2).
2. Reflash magisk.
Done!!!
Don't forget to hit thanks and rate the thread nicely, it's free
More features will be added with time. Enjoy
Credits
kapmino269 for testing
IanH82uk for testing
AlaskaLinuxUser for great tutorials on kernel development
tanish2k09 for Klapse
Thanks to all devs whom I learnt a thing or two from and also cherry-picked from
XDA:DevDB Information
[CUSTOM] Phizero kernel for j4primelte
Contributors
Geckyn
Source Code: [url]https://github.com/geckyn[/URL]
Version Information
Status: Stable
Current Stable Version: phizero-kernelv2.0
Stable Release Date: 2019-08-17
Current Beta Version: phizero-kernelv1.0
Beta Release Date: 2019-06-28
Created 2019-06-28
Last Updated 2019-08-17
So.. any update? I just want to flash and forget it (lol) without changing anything else. Do I also need to set the minimum frequency manually if I flash the squeezer profile?
Andhika24kd said:
So.. any update? I just want to flash and forget it (lol) without changing anything else. Do I also need to set the minimum frequency manually if I flash the squeezer profile?
Click to expand...
Click to collapse
No updates yet...and yes you need to set the minimum frequency manually after flashing the squeezer profile
Would be great if there were CPU OC options.
poviking said:
Would be great if there were CPU OC options.
Click to expand...
Click to collapse
Yhup done with that and others....update will come next week or less
Geckyn said:
Yhup done with that and others....update will come next week or less
Click to expand...
Click to collapse
Awesome! You brought life to a almost useless phone hehe. Before it lagged just to accept calls . Great work!
poviking said:
Awesome! You brought life to a almost useless phone hehe. Before it lagged just to accept calls . Great work!
Click to expand...
Click to collapse
Working for j415f?
jhedjhed11 said:
Working for j415f?
Click to expand...
Click to collapse
Yes, it works.
alexx zes said:
Yes, it works.
Click to expand...
Click to collapse
On OneUI firmware?
jhedjhed11 said:
On OneUI firmware?
Click to expand...
Click to collapse
Yes, on Oneui.
1. Go to download mode .
2. Flash twrp in Ap .
Notice : uncheck auto reboot .
3. Reboot recovery .
4. Install
- disable_All_pie_security.zip .
https://www.androidfilehost.com/?fid...89523397964680
-J4 plus disable encryption .
https://www.androidfilehost.com/?fid...89523397964679
5. Format data .
6. Follow the steps available in this thread
Or check TWRP thread https://forum.xda-developers.com/ga...ecovery-twrp-3-2-3-1-galaxy-j4-j415f-t3876876
jhedjhed11 said:
On OneUI firmware?
Click to expand...
Click to collapse
If it works you'll lose mtp function. That's the only difference between this and stock kernel
Geckyn said:
If it works you'll lose mtp function. That's the only difference between this and stock kernel
Click to expand...
Click to collapse
Will this improve the gaming performance?
jhedjhed11 said:
On OneUI firmware?
Click to expand...
Click to collapse
Install twrp as "alexx" explains, then install lineage 16 through twrp and then the kernel
jhedjhed11 said:
Will this improve the gaming performance?
Click to expand...
Click to collapse
lol its not going to turn your device into some gaming beast but it obviously has a performance advantage....new kernel uploaded with overclock and other features.
poviking said:
Install twrp as "alexx" explains, then install lineage 16 through twrp and then the kernel
Click to expand...
Click to collapse
kernel will work on any non-stock ROM including gsi ROMS...thread updated. I'm not sure about stock ( havent tested) but likely may not work due to certain changes in kernel...if it does work however...mtp function will be lost
Geckyn said:
kernel will work on any non-stock ROM including gsi ROMS...thread updated. I'm not sure about stock ( havent tested) but likely may not work due to certain changes in kernel...if it does work however...mtp function will be lost
Click to expand...
Click to collapse
Didn't know that
How is it going with the updated kernel, it's been sometime since you said you were gonna release it.
poviking said:
Didn't know that
How is it going with the updated kernel, it's been sometime since you said you were gonna release it.
Click to expand...
Click to collapse
Updated a moment ago....phizero-v2.0
Geckyn said:
Updated a moment ago....phizero-v2.0
Click to expand...
Click to collapse
Awesome, didn't see the update
The performance of the second version is better, with all the new features. But I've noticed a bug when starting games that stresses the GPU and CPU, its very stable for the few minutes the the game crashes.
poviking said:
The performance of the second version is better, with all the new features. But I've noticed a bug when starting games that stresses the GPU and CPU, its very stable for the few minutes the the game crashes.
Click to expand...
Click to collapse
I'm sure there's something wrong at your os level or probably you are trying to run high end games on an entry level device and not kernel related as I use it too..played a game with it and I'm always watching the frequency scalings like a police ..plus no such problem confirmed from testers