Related
I updated xz via ota update to 7.0
After the update, the battery is quickly decreasing. It was look like a deep sleep didn't work,....
So I did recovery with xperiacomanion (made a clean install).
Now i don't have transparent lock screen anymore (witch came with update to 7.0) ?!
Reset didn't help.
should I try to do recovery again?
Thank you.
EDIT:
now i realizerd that transparent lock screen enable only when you change the wallpaper. If you change the theme it doesn't show
I don't know what's the point
Disclaimer
I'm am not responsible for bricked devices, flashing custom ROM's/Recovery's is done so at YOUR OWN RISK!
Information
This is a standard Lineage build without any extras & compiled with stock SU6 6.0.1 kernel
Download
http://www.mediafire.com/file/n55eth5yidbos5c/lineage-13.0-20171007-UNOFFICIAL-p839v55.zip
Installation
I recommend doing a full wipe before flashing!
Flash ROM using TWRP
Flash GAPPS 6.0 arm package of your choice
Reboot & wait for Android to boot
Version Information
Status Beta
ROM OS 6.0.1 Marshmallow
ROM Kernel 3.10.49
Created 2017-08-24
Updated 2017-10-07
Thanks goes out to @wbrambley for his involvement in testing & helping to solve / fix bugs!
I noticed that "mm-pp-daemon" was stopping the CPU from going in to sleep state and keeping it at full clocks but after killing the process it reloaded and was fine.
@nutsda, I've tried to pm this but its not working. Probably some spell check safety net
You should post a link here. http://www.modaco.com/forums/forum/796-vodafone-smart-ultra-6/
the SU6 has its own device forum on Modaco and I'm sure it would create some interest.
I've pushed(?) a change that enables the NFC and also put up my overlay folders. There's some stuff in there you might like.
The sensors (Accelerometer, Magnetic field and Rotation vector) are still causing grief.
How fast is your phone to "wake up" from sleep? My buttons light up but screen on takes about 5 seconds. (could be the sensor hal cal firing up but im not 100% sure.)
wbrambley said:
@nutsda, I've tried to pm this but its not working. Probably some spell check safety net
You should post a link here. http://www.modaco.com/forums/forum/796-vodafone-smart-ultra-6/
the SU6 has its own device forum on Modaco and I'm sure it would create some interest.
I've pushed(?) a change that enables the NFC and also put up my overlay folders. There's some stuff in there you might like.
The sensors (Accelerometer, Magnetic field and Rotation vector) are still causing grief.
How fast is your phone to "wake up" from sleep? My buttons light up but screen on takes about 5 seconds. (could be the sensor hal cal firing up but im not 100% sure.)
Click to expand...
Click to collapse
I have merged the commit you made to github & can confirm NFC now enables for me.
Update has been uploaded http://www.mediafire.com/file/7bjnwaaupm4ejf0/lineage-13.0-20170903-UNOFFICIAL-p839v55.zip, first post link also updated.
Camera now working & NFC now enables thanks to @wbrambley
How do I get this rom installed? I already failed rooting my phone to install TWRP. I tried to get temporary Root with KingRoot but that doesn´t work. I´ve Stock Marshmallow Rom on my phone. Can someone help me?
coolbook1 said:
How do I get this rom installed? I already failed rooting my phone to install TWRP. I tried to get temporary Root with KingRoot but that doesn´t work. I´ve Stock Marshmallow Rom on my phone. Can someone help me?
Click to expand...
Click to collapse
Use recovery to flash a 5.1 stock ROM, then you can get temporary root. I'm guessing you've found a guide for this. After that I recommend flashing stock MM from TWRP. There's one with edited uodater-script around that will work.
Hint: look at the forum I posted earlier.
Sent from my HUAWEI GRA-L09
Thanks for your rom
I Wonder when will sensors be fixed?
Update uploaded http://www.mediafire.com/file/v5m8keoadkwkaz2/lineage-13.0-20170906-UNOFFICIAL-p839v55.zip
Sensors now working properly, also improved boot up time.
Waiting For Your Stable Version
Sensors now working properly, also improved boot up time.[/QUOTE]
thanks Nutsda I'm Waiting For Your Stable Version...
lineage-13.0-20170906
Auto rotate screen is broken in this build.
thanks
When will we see an update of your work? Keep it up.
Okay here is an updated build http://www.mediafire.com/file/wedlnkhzk4e5o81/lineage-13.0-20170925-UNOFFICIAL-p839v55.zip, playstore should now work properly & improvements to sensors (but probably still require more work).
Thank you. Market now works. Still can't install nova but overall very good. Looking forward for the first stable release
New update uploaded http://www.mediafire.com/file/n55eth5yidbos5c/lineage-13.0-20171007-UNOFFICIAL-p839v55.zip
Improved audio volume,
All sensors now working - thanks to @wbrambley,
Lineage updated to 6.0.1_r80.
i didn't tried this rom but
can u tell me why any custom rom for this phone is laggy as hell...?
DR.iTACHi said:
i didn't tried this rom but
can u tell me why any custom rom for this phone is laggy as hell...?
Click to expand...
Click to collapse
I haven't tried the other custom roms but I believe it will be because most of them are ported from another phone rather than specifically built for this phone.
nutsda said:
I haven't tried the other custom roms but I believe it will be because most of them are ported from another phone rather than specifically built for this phone.
Click to expand...
Click to collapse
i tried your cm 12.1
that built specially for this phone laggy as hell too!
is this rom is laggy too?
i flashed your rom it's stable and not laggy like others but how to root it?
DR.iTACHi said:
i flashed your rom it's stable and not laggy like others but how to root it?
Click to expand...
Click to collapse
You have to download SuperSU to get root access as Lineage doesn't have root access built in.
I have TA-1046 with Pie and unlocked bootloader...
After install (via TWRP) Magisk (official zip release (tested 17.1 and 17.2)), then is missed:
From Settings/System/Gestures:
- Swipe fingerprint for notification
- Swipe up on Home button
- Lift to check phone
From Settings/Display:
- Double tap to wake
After uninstall Magisk, then all this gestures is available again, this is not (direct) related to unlocked bootloader, still have unlocked and without Magisk installed is all Gestures here...
I try following:
- enabled Magisk hide
- activated MagiskManager
- installed Magisk module "MagiskHide Props Config" (but not manualy changed anynthing in prop files)
Anyone have any tips for fixing this?
btw: screenshots is from DP4.1, but in Stable Pie is same problem...
UPDATE: thanks to Doktaphex, workaround found, confirmed with screenshot here
UPDATE2: actual version (1.7.4) not working, i not have installed other version before than 1.4.3, reinstalled this older version manualy from Download folder working
Where did you get TWRP for pie? Please guide me to the correct place
Broadcasted from Zeta Reticuli
I had the same issue! I'm on Official Android 9 (version 00WW_3_22C) TA1046, and i root it with magisk by following this method:
https://forum.xda-developers.com/nokia-7-plus/how-to/guide-how-to-root-ab-partition-scheme-t3792509
When i remove Magisk Module, Gesture navigation, Lift to check and Double tap to wake are available again!
Gravemind2015 said:
Where did you get TWRP for pie? Please guide me to the correct place
Broadcasted from Zeta Reticuli
Click to expand...
Click to collapse
I think he didn't flash TWRP, he booted into it and flashed Magisk. That's what I did too.
---------- Post added at 12:07 ---------- Previous post was at 11:35 ----------
I am on Oreo September and I keep getting a blank screen on Smart Lock. every time I enable it somehow (Settings>Lockscreen>Trust Agents>Disable Smart Lock>Reboot>Enable Smart Lock), it gets blank again after some time.
k3dar7 said:
I have TA-1046 with Pie and unlocked bootloader...
After install (via TWRP) Magisk (official zip release (tested 17.1 and 17.2)), then is missed:
From Settings/System/Gestures:
- Swipe fingerprint for notification
- Swipe up on Home button
- Lift to check phone
From Settings/Display:
- Double tap to wake
After uninstall Magisk, then all this gestures is available again, this is not (direct) related to unlocked bootloader, still have unlocked and without Magisk installed is all Gestures here...
I try following:
- enabled Magisk hide
- activated MagiskManager
- installed Magisk module "MagiskHide Props Config" (but not manualy changed anynthing in prop files)
Anyone have any tips for fixing this?
btw: screenshots is from DP4.1, but in Stable Pie is same problem...
Click to expand...
Click to collapse
I just got the OTA today and had the exact same problem. Initially i thought it was just a bug from the update and did a factory reset, and it worked and had the gestures back until I installed Magisk again. Did you find how to fix it?
Gravemind2015 said:
Where did you get TWRP for pie? Please guide me to the correct place
Click to expand...
Click to collapse
i not flash TWRP, install Magisk via ONLY BOOTed TWRP(Oreo version)
@siberflyers, @TheWing still no have sollution
Same problem here on TA1062.
Do we suspect it's the phone or magisk to blame?
@k3dar7 Need your help guys. I have switched back to Oreo after my brief stay on Pie. I have made a Github issue regarding this here https://github.com/topjohnwu/Magisk/issues/668
The dev has replied and is asking for the value of
cat /proc/mounts
Click to expand...
Click to collapse
on an UNROOTED (Magisk uninstalled) Pie. Could someone perhaps provide this info to the ticket contained above, to get a resolution to this issue?
braveheartleo said:
@k3dar7 Need your help guys. I have switched back to Oreo after my brief stay on Pie. I have made a Github issue regarding this here https://github.com/topjohnwu/Magisk/issues/668
The dev has replied and is asking for the value of on an UNROOTED (Magisk uninstalled) Pie. Could someone perhaps provide this info to the ticket contained above, to get a resolution to this issue?
Click to expand...
Click to collapse
info added: https://github.com/topjohnwu/Magisk/issues/668#issuecomment-433522871
braveheartleo said:
@k3dar7 Need your help guys. I have switched back to Oreo after my brief stay on Pie. I have made a Github issue regarding this here https://github.com/topjohnwu/Magisk/issues/668
The dev has replied and is asking for the value of on an UNROOTED (Magisk uninstalled) Pie. Could someone perhaps provide this info to the ticket contained above, to get a resolution to this issue?
Click to expand...
Click to collapse
Here is the output in a text file. Had one of my friend pull it out from his TA-1046 Global ROM Pie Stable, September patch.
I hope it helps (◕‿◕)
Edit: Commented on github with pastebin link. There already was one but I saw more lines on mine who decided to post it anyway
@k3dar7 @Gravemind2015 Many thanks Hopefully, this will lead to a fix so that Magisk properly supports our device on Pie sans the glitches.
If you use the PIX3LIFY mod, it will re-enable all missing gestures.
Doktaphex said:
If you use the PIX3LIFY mod, it will re-enable all missing gestures.
Click to expand...
Click to collapse
I install and active this module.... And nothing happens.... Gesture Navigation is still missing...
siberflyers said:
I install and active this module.... And nothing happens.... Gesture Navigation is still missing...
Click to expand...
Click to collapse
Strange. It worked for me, not that I was searching for a solution, so I thought that I would share my experience
Doktaphex said:
If you use the PIX3LIFY mod, it will re-enable all missing gestures.
Click to expand...
Click to collapse
You are a WIN, thx Work for me, missed gestures is back with Magisk/MagiskManager installed...
edit: add screenshot of Magisk/Modules
braveheartleo said:
@k3dar7 @Gravemind2015 Many thanks Hopefully, this will lead to a fix so that Magisk properly supports our device on Pie sans the glitches.
Click to expand...
Click to collapse
your issue be closed, but if i try magisk canary build 9592a69 then see problem not fixed, can you please try?
and if too have still problem with missed gesture (without forkaround with PIX3LIFY), then please reopen issue?
k3dar7 said:
your issue be closed, but if i try magisk canary build 9592a69 then see problem not fixed, can you please try?
and if too have still problem with missed gesture (without forkaround with PIX3LIFY), then please reopen issue?
Click to expand...
Click to collapse
Unfortunately, I can't do that atm. I'm on Oreo right now and I'm not moving up to Pie. I'm afraid you'll have to ask the others to try it out, and if they too concur with your experience, then I'd gladly reopen the issue. ?
braveheartleo said:
Unfortunately, I can't do that atm. I'm on Oreo right now and I'm not moving up to Pie. I'm afraid you'll have to ask the others to try it out, and if they too concur with your experience, then I'd gladly reopen the issue. ?
Click to expand...
Click to collapse
i think if you not have now Pie, then i wait if someone confirm/disprove and i reopen own issue
btw: actual (1.7.4) version Pix3lify stop working (=not enable missed gesture), i not have installed other version before than 1.4.3, reinstalled this (1.4.3) manualy from Download(if have installed this version before) folder working
With Pie Nobember update is now NOT need workaround using Pix3lify 1.4.3 mod...
now gestures is simply not blocked with installed Magisk (17.3 which is version BEFORE (not working for me) patch on Magisk side)
Does downgrade to MIUI 11 causing any problem with sensor lost? im planining to downgrade, just curious if anyone experience problems after downgrading?
EDIT: for those interested in this thread and wanted to downgrade..in my experience downgrading cause fingerprint sensor lost..and i was able to bring back fod only after flashing miui 12 back
Dadovvv said:
Does downgrade to MIUI 11 causing any problem with sensor lost? im planining to downgrade, just curious if anyone experience problems after downgrading?
Click to expand...
Click to collapse
You can downgrade safely, don't worry
XDRdaniel said:
You can downgrade safely, don't worry
Click to expand...
Click to collapse
Did u even try to downgrade to miui 11?
Hmm i blindly believe u...and now I lost fingerprint options. and I didn't create backup of persist.img
Hope other sensors are fine. Please in future don't answer anyone with guess and if u are not sure.
EDIT: Tried everything to back fingerprint on miui 11 but fails. All other sensor is fine even L1 widevine is ok. After flashing MIUI 12 fingerprint is back but i think it working slower (maybe placebo effect)
Dadovvv said:
Did u even try to downgrade to miui 11?
Hmm i blindly believe u...and now I lost fingerprint options. and I didn't create backup of persist.img
Hope other sensors are fine. So please don't answer anyone with guess and if u are not sure.
EDIT: Tried everything to back fingerprint on miui 11 but fails. All other sensor is fine even L1 widevine is ok. After flashing MIUI 12 fingerprint is back but i think it working slower (maybe placebo effect)
Click to expand...
Click to collapse
Hey,
When i had a trouble, or stutter on my fingerprint on my oneplus 3, to avoid that, the tips is to delete all fingerprint, and restart saving new one. Try it and tells me if it works.
FrostStaff said:
Hey,
When i had a trouble, or stutter on my fingerprint on my oneplus 3, to avoid that, the tips is to delete all fingerprint, and restart saving new one. Try it and tells me if it works.
Click to expand...
Click to collapse
i dont have any options related to fingerprint after downgrade (on CIT test fingerprint sensor is not available-fail), so i cant remove or delete any of them. anyway thanks for answer i give up an back to miui12 all working good now.
Dadovvv said:
i dont have any options related to fingerprint after downgrade (on CIT test fingerprint sensor is not available-fail), so i cant remove or delete any of them. anyway thanks for answer i give up an back to miui12 all working good now.
Click to expand...
Click to collapse
my phone too. version 8.128g
Downgrading means a clean install and fastboot method to be safe so you cant have bugs
Mastakony said:
Downgrading means a clean install and fastboot method to be safe so you cant have bugs
Click to expand...
Click to collapse
I know what is downgrade. i did clean install and lost fingerprint options. this is a same issue like it was on mi9t pro where downgrade causing some sensors lost. Thats why i asked here is anyone experience problem after downgrade. but unfortunately people without knowing answering.
@Dadovvv May i ask you why you wanted to revert MIUI please ?
FrostStaff said:
@Dadovvv May i ask you why you wanted to revert MIUI please ?
Click to expand...
Click to collapse
miui11
no bugs, better battery.
Dadovvv said:
I know what is downgrade. i did clean install and lost fingerprint options. this is a same issue like it was on mi9t pro where downgrade causing some sensors lost. Thats why i asked here is anyone experience problem after downgrade. but unfortunately people without knowing answering.
Click to expand...
Click to collapse
I did the same thing without any FOD problem (V12.0.3.0.QJKMIXM to V11.0.2.0.QJKMIXM miflash).
But i lost fingerprint with a Weekly EU rom.
I solved the problem with this method:Flashed with miflash V12.0.3.0.QJKMIXM clean all and lock then :Go to the CIT menu press the 3 dot in the top right of screen scroll down calibrate the FOD -> place a white thing on FOD click start before next step put something black on FOD and press next...wait until finish close restart and add your fingerprint(Thanks to tze_vitamin).that's all...
NOSS8 said:
I did the same thing without any FOD problem (V12.0.3.0.QJKMIXM to V11.0.2.0.QJKMIXM miflash).
But i lost fingerprint with a Weekly EU rom.
I solved the problem with this method:Flashed with miflash V12.0.3.0.QJKMIXM clean all and lock then :Go to the CIT menu press the 3 dot in the top right of screen scroll down calibrate the FOD -> place a white thing on FOD click start before next step put something black on FOD and press next...wait until finish close restart and add your fingerprint(Thanks to tze_vitamin).that's all...
Click to expand...
Click to collapse
i was downgrade 12.0.3.0eu to 11.0.6.0eu (clean all and lock method) and lost FOD. Tried everything to back FOD and only solution for me was flashing back 12.0.3.0. Didn't try with calibration on CIT as i didn't know for that..all i was tried in CIT was fingerprint test which failed. Thanks
so used miflash to downgrade? did you upgrade to 11.0.6 then ? Im having problems with 12.0.4 widevine not working and mediaserver having 70% battery consumption
Saphyres said:
so used miflash to downgrade? did you upgrade to 11.0.6 then ? Im having problems with 12.0.4 widevine not working and mediaserver having 70% battery consumption
Click to expand...
Click to collapse
yes i was using miflash to downgrade and i was downgrading from 12.0.3.0 to 11.0.6.0 and i was lost fingerprint, since 11.0.6.0 is last and only MIUI 11 for EU i was not able to flash any other 11. so i was back on MIUI 12 again to fix fingerprint problem.
Right now im using 12.0.4.0 Indonesian rom with locked bootloader and im pretty happy with it, im only missing miui launcher right now.
Dadovvv said:
Does downgrade to MIUI 11 causing any problem with sensor lost? im planining to downgrade, just curious if anyone experience problems after downgrading?
EDIT: for those interested in this thread and wanted to downgrade..in my experience downgrading cause fingerprint sensor lost..and i was able to bring back fod only after flashing miui 12 back
Click to expand...
Click to collapse
Anybody know how I downlograd to miui 10 successfully
chickentikka007 said:
Anybody know how I downlograd to miui 10 successfully
Click to expand...
Click to collapse
miui 10 doesn't exist for POCO f2 pro
Hello,
Like the title said, orientation is off by 90°. Auto rotate works as expected (if we ignore it being off by 90°).
The camera is also off.
But when I'm in landscape and try to check tablet orientation via adb. I get it's in position "0" which is for portrait.
It seems like the sensors are misscalibrated. Any way to fix this?
I used this custom rom: https://sourceforge.net/projects/andyyan-gsi/files/lineage-20-light/
Anybody has any ideas?
did you flash lineageos on zui13 or zui14 firmware？
Zui 14
Tenzinjamyang said:
did you flash lineageos on zui13 or zui14 firmware？
Click to expand...
Click to collapse
However I fully wiped my device before installing lineage. But it was on zui 14 before.