Related
Disclaimer
I'm am not responsible for bricked devices, flashing custom ROM's/Recovery's is done so at YOUR OWN RISK!
Information
This is a standard Lineage build without any extras & compiled with stock SU6 6.0.1 kernel
Download
http://www.mediafire.com/file/n55eth5yidbos5c/lineage-13.0-20171007-UNOFFICIAL-p839v55.zip
Installation
I recommend doing a full wipe before flashing!
Flash ROM using TWRP
Flash GAPPS 6.0 arm package of your choice
Reboot & wait for Android to boot
Version Information
Status Beta
ROM OS 6.0.1 Marshmallow
ROM Kernel 3.10.49
Created 2017-08-24
Updated 2017-10-07
Thanks goes out to @wbrambley for his involvement in testing & helping to solve / fix bugs!
I noticed that "mm-pp-daemon" was stopping the CPU from going in to sleep state and keeping it at full clocks but after killing the process it reloaded and was fine.
@nutsda, I've tried to pm this but its not working. Probably some spell check safety net
You should post a link here. http://www.modaco.com/forums/forum/796-vodafone-smart-ultra-6/
the SU6 has its own device forum on Modaco and I'm sure it would create some interest.
I've pushed(?) a change that enables the NFC and also put up my overlay folders. There's some stuff in there you might like.
The sensors (Accelerometer, Magnetic field and Rotation vector) are still causing grief.
How fast is your phone to "wake up" from sleep? My buttons light up but screen on takes about 5 seconds. (could be the sensor hal cal firing up but im not 100% sure.)
wbrambley said:
@nutsda, I've tried to pm this but its not working. Probably some spell check safety net
You should post a link here. http://www.modaco.com/forums/forum/796-vodafone-smart-ultra-6/
the SU6 has its own device forum on Modaco and I'm sure it would create some interest.
I've pushed(?) a change that enables the NFC and also put up my overlay folders. There's some stuff in there you might like.
The sensors (Accelerometer, Magnetic field and Rotation vector) are still causing grief.
How fast is your phone to "wake up" from sleep? My buttons light up but screen on takes about 5 seconds. (could be the sensor hal cal firing up but im not 100% sure.)
Click to expand...
Click to collapse
I have merged the commit you made to github & can confirm NFC now enables for me.
Update has been uploaded http://www.mediafire.com/file/7bjnwaaupm4ejf0/lineage-13.0-20170903-UNOFFICIAL-p839v55.zip, first post link also updated.
Camera now working & NFC now enables thanks to @wbrambley
How do I get this rom installed? I already failed rooting my phone to install TWRP. I tried to get temporary Root with KingRoot but that doesn´t work. I´ve Stock Marshmallow Rom on my phone. Can someone help me?
coolbook1 said:
How do I get this rom installed? I already failed rooting my phone to install TWRP. I tried to get temporary Root with KingRoot but that doesn´t work. I´ve Stock Marshmallow Rom on my phone. Can someone help me?
Click to expand...
Click to collapse
Use recovery to flash a 5.1 stock ROM, then you can get temporary root. I'm guessing you've found a guide for this. After that I recommend flashing stock MM from TWRP. There's one with edited uodater-script around that will work.
Hint: look at the forum I posted earlier.
Sent from my HUAWEI GRA-L09
Thanks for your rom
I Wonder when will sensors be fixed?
Update uploaded http://www.mediafire.com/file/v5m8keoadkwkaz2/lineage-13.0-20170906-UNOFFICIAL-p839v55.zip
Sensors now working properly, also improved boot up time.
Waiting For Your Stable Version
Sensors now working properly, also improved boot up time.[/QUOTE]
thanks Nutsda I'm Waiting For Your Stable Version...
lineage-13.0-20170906
Auto rotate screen is broken in this build.
thanks
When will we see an update of your work? Keep it up.
Okay here is an updated build http://www.mediafire.com/file/wedlnkhzk4e5o81/lineage-13.0-20170925-UNOFFICIAL-p839v55.zip, playstore should now work properly & improvements to sensors (but probably still require more work).
Thank you. Market now works. Still can't install nova but overall very good. Looking forward for the first stable release
New update uploaded http://www.mediafire.com/file/n55eth5yidbos5c/lineage-13.0-20171007-UNOFFICIAL-p839v55.zip
Improved audio volume,
All sensors now working - thanks to @wbrambley,
Lineage updated to 6.0.1_r80.
i didn't tried this rom but
can u tell me why any custom rom for this phone is laggy as hell...?
DR.iTACHi said:
i didn't tried this rom but
can u tell me why any custom rom for this phone is laggy as hell...?
Click to expand...
Click to collapse
I haven't tried the other custom roms but I believe it will be because most of them are ported from another phone rather than specifically built for this phone.
nutsda said:
I haven't tried the other custom roms but I believe it will be because most of them are ported from another phone rather than specifically built for this phone.
Click to expand...
Click to collapse
i tried your cm 12.1
that built specially for this phone laggy as hell too!
is this rom is laggy too?
i flashed your rom it's stable and not laggy like others but how to root it?
DR.iTACHi said:
i flashed your rom it's stable and not laggy like others but how to root it?
Click to expand...
Click to collapse
You have to download SuperSU to get root access as Lineage doesn't have root access built in.
This is not a guide as such but more of direction to other peoples hard work and effort. I am not a developer, just an experimenter!
Main Credits - @MishaalRahman and @phhusson.
For me one of the main selling points of the Mediapad M5 was being Project Treble enabled. Being a big Nexus/Pixel fan I am not particularly fond of EMUI.
So after reading this detailed and clear guide by Mishaal Rahman http://www.xda-developers.com/flash-generic-system-image-project-treble-device/, I was able to successfully install an AOSP Generic System Image by phhusion http://forum.xda-developers.com/project-treble/trebleenabled-device-development/experimental-phh-treble-t3709659
My device - CMR-W09 (10.8" non pro wifi).
I flashed v17 with Gapps and SU and apart from an Android System error upon boot it seems to work ok. I have not had much time to play with it but so far Wifi, Bluetooth, sound, camera, fingerprint sensor, MTP and SD card appear to be working. I had issues with google play not downloading apps but worked after clearing data/cache on google play and google play services. Also have issues with superuser force closing.
For the nervous and unsure, you can easily return to stock Huawei firmware by flashing your devices stock system.img in fastboot.
Obviously bootloader needs to be unlocked see guide - https://forum.xda-developers.com/mediapad-m5/how-to/bootloader-unlock-guide-t3781275 by @Apo11on. You can use Apo11on's root guide to download your firmware to get your stock system.img.
OEM needs to be disabled in developer options.
It is best to factory reset via recovery mode and then boot straight into bootloader to keep FRP unlocked.
Do this at your own risk but please read all the available information and guides on XDA.
pphusion has made other Project Treble roms but I have yet to try them. Hopefully it would be nice if someone could fully develop Lineage for this device.
which rom did you use ? the A/B one or A only ?
It's an A-only device.
I tried AOSP with GAPPS and SU but SuperSU shows the su binary as being occupied through several reboots. Getting the Lineage GSI now and will root with magisk.
Edit:
Blah... Lineage is not an option until we have twrp :/ (at least for me) No way to install GAPPS.
Edit:
SU works with phh's super user available from the play store.
Yes i have the AOSP one now on my AL-09 and it works fine till now. Bugs : home Button not working but fingerprint works, supersu with the phhs one works. Bluetooth sometimes gives an error message. Battery drain is a little bit high. I installed the Huawei camera apk from treble forum and This works also good.
Another Bug is Apps sometimes force closing but Not often.
How is Lineage performing?
A little bit off topic, but how did you unlock the bootloader on the Wifi only version since the website for the code is offline for a few weeks now?
Thanks in advance.
Fantastic to see that Treble works.
On my AL09(ASOP with gapps and su) bluetooth never connects to any of my devices and fc on pairing.
Lineage was a non-starter, since I was unable to get gapps running. I was also getting a vendor mismatch toast. I'm back on the stock .125(C00), no working tether is infinitely more useable than no BT.
It was nice to be able to flash something that didn't brick it and was partially useable.
fargonaz said:
On my AL09(ASOP with gapps and su) bluetooth never connects to any of my devices and fc on pairing.
Lineage was a non-starter, since I was unable to get gapps running. I was also getting a vendor mismatch toast. I'm back on the stock .125(C00), no working tether is infinitely more useable than no BT.
It was nice to be able to flash something that didn't brick it and was partially useable.
Click to expand...
Click to collapse
I understand, Do you think it gets more stable for our device in the future?
florian-m19 said:
I understand, Do you think it gets more stable for our device in the future?
Click to expand...
Click to collapse
I think so, if you look at the github comments there is a huawei phone having the same problem, so as long as a phone is having problems it should get fixed
We would like some screenshots to see if this is real @AndDiSa @rcstar6696 @phhusson @MishaalRahman
Just installed it, attached a few screenshots. Haven't tested it a lot, but it boots.
Wie are Not joking, its real ??
Delete, double post
I will be getting my Mediapad M5 8.4 tomorrow and will be flashing the AOSP treble build straight away. Just a heads up a updated build has just been posted with some Huawei related fixes.
i flash it now, and give feedback tomorrow
I flashed the new one with gapps and su, and for the sht-l09 there is no working bluetooth, so that's as far as I go. It will be nice when the BT is fixed for this device.
Works good with dirty flash, Home Button is working now and also Automatic Brightness, but battery draining is really high and it gets hot.
florian-m19 said:
Works good with dirty flash, Home Button is working now and also Automatic Brightness, but battery draining is really high and it gets hot.
Click to expand...
Click to collapse
Have you tried changing the cpu governor? Is it set to something like interactive? I got my Mediapad today but I am waiting for the bootloader unlock code from Huawei.
darren1 said:
Have you tried changing the cpu governor? Is it set to something like interactive? I got my Mediapad today but I am waiting for the bootloader unlock code from Huawei.
Click to expand...
Click to collapse
yes it is on interactive, should i change this ?
florian-m19 said:
yes it is on interactive, should i change this ?
Click to expand...
Click to collapse
Might be worth experimenting with. Try conservative or ondemand if they are available. You can always change back if it doesn't make any difference.
darren1 said:
Might be worth experimenting with. Try conservative or ondemand if they are available. You can always change back if it doesn't make any difference.
Click to expand...
Click to collapse
okay i change it in helix engine to ondemand and the suspend engine is now on powersafe.
I've tested 3 GSI images with my phone last weekend, here are the results:
--------------------------------------------------------------------------------------------------------------------------------------------------------------
1. PixelExperience: https://forum.xda-developers.com/poco-f1/how-to/treble-pixel-experience-9-0-t3839681
or here: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
- Everything work well
- Feel faster than stock, no mi nonsense
- Wifi and data work fine
- Sound: OK
- Camera: work
- Bug: NO DARK MODE, it went black, and never come back.
- Ugly: the notification bar is not so compatible with curve screen, the clock and battery percentage almost got cut-off
- I might do something wrong, but my bank app said the phone is rooted. So, I have to flash stock back.
2. LineageOS: https://forum.xda-developers.com/pr...vice-development/9-0-lineage-os-16-0-t3840801
- There is this "privacy protection" error pop-up all the time
- Booted, run smooth
- Wifi and data work fine
- Sound and camera work.
- LineageOS handles the top and bottom curve better than PixelExp, the notification bar look better
- Some setting features were not working and follow with error, but the phone still work normally after error message
- I really hope the Lineage team get it work really soon. :good:
3. HavocOS: https://forum.xda-developers.com/pr...-device-development/rom-havoc-os-8-1-t3819050
- Bootloop...end
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Step
1. Unlock bootloader
2. Flash TWRP
3. With adb tool, flash system image (I've tried to flash PixelExp system image with TWRP, and got to bootloop, so I've changed to flash with adb command)
4. With TWRP flash decrypt
5. With TWRP wipe cache/dalvick
5. With TWRP format data
6. With TWRP flash decrypt again
Is there any way to flash PixelExperience without root?
PS. When I wrote that the camera work: I mean it works you can take a picture with both front and back cameras, but I didn't compare the picture quality at all.
Just tested Aosp Extended and I'll take the template you posted in the OP so it's easier for you.
AEX post: https://forum.xda-developers.com/pr...device-development/rom-aosp-extended-t3821934
- Rebooted itself a few times during the first boot.
- Felt sluggish during the first minutes, but then everything went smooth as butter.
- Wifi and data work fine
- Sound: OK
- Camera: work, but worse quality than stock
- Bug: NO DARK MODE, it went black, and never come back. In order to fix this you need to reflash the image
- Ugly: the notification bar is not so compatible with curve screen, the clock and battery percentage almost got cut-off. However you can almost fix it changing the display size, not a perfect fix but better than stock.
I'll be going to MIUI stock again, even though I hate it
Thanks for your feedback, you will save us a lot of time!
So, so far, you haven't found any GSI that handle completely properly the notch and curves of our screen?
I dont have any cut off on pixel experience after couple of reboots
Tomatot- said:
Thanks for your feedback, you will save us a lot of time!
So, so far, you haven't found any GSI that handle completely properly the notch and curves of our screen?
Click to expand...
Click to collapse
LineageOS handle the notch almost perfect, however, with other bug.
tomhtg90 said:
I dont have any cut off on pixel experience after couple of reboots
Click to expand...
Click to collapse
It looks nice indeed! Thanks, I'll give it a try.
tomhtg90 said:
I dont have any cut off on pixel experience after couple of reboots
Click to expand...
Click to collapse
For me, the time and battery percentage are closer to the edge than yours.
Also, is it root? Can we flash without root?
Thanks.
kikoarl said:
Just tested Aosp Extended and I'll take the template you posted in the OP so it's easier for you.
AEX post: https://forum.xda-developers.com/pr...device-development/rom-aosp-extended-t3821934
- Rebooted itself a few times during the first boot.
- Felt sluggish during the first minutes, but then everything went smooth as butter.
- Wifi and data work fine
- Sound: OK
- Camera: work, but worse quality than stock
- Bug: NO DARK MODE, it went black, and never come back. In order to fix this you need to reflash the image
- Ugly: the notification bar is not so compatible with curve screen, the clock and battery percentage almost got cut-off. However you can almost fix it changing the display size, not a perfect fix but better than stock.
I'll be going to MIUI stock again, even though I hate it
Click to expand...
Click to collapse
I, personally don't have any preferred template.
It seems as if the AEX is more or less on par with the PixelEx.
Can you manage to flash it without root?
I can live with a bit ugly notification and some minor bug, but I need to use the bank app. So I want to flash it without root.
I tested RR v6.1 GSI and it works with 2 intolerable bugs.
1, 3.5mm headphone not works. Speaker still works when haedphone plug in.
2, since the notch removed by command 'wm size 1080x2074' (result:here), screenshots will add black frame on the top and bottom, and the original contents(1080x2274) are zipped into 1080x1902, so it looks a liitle strange
RR GSI post: gsi-resurrection-remix-o-6-1-0-t3811299
Flashed arm64 a only 0818 version.
- root(magisk 17.1) and xposed v90 beta3 work.
- Wifi and data(CMCC) work
- Sound: both speakers work
- Camera: work
- Bug: headphone not work , screenshot problem
although i hate MIUI , i have to return to it . i need 3.5mm. looking foward to lineage 15.1 or aosp, etc.
I'm not sure why everyone is so eager to test these GSI builds when they don't actually work 100% as stable.
LOS 15.1 development already in progress and I've been watching it, everything is looking good so far ( including camera, dual 4g/volte). Just give the devs sometime for the release.
Daruwalla said:
I'm not sure why everyone is so eager to test these GSI builds when they don't actually work 100% as stable.
LOS 15.1 development already in progress and I've been watching it, everything is looking good so far ( including camera, dual 4g/volte). Just give the devs sometime for the release.
Click to expand...
Click to collapse
I could answer that...easily...maybe
I hate MIUI.
I hate ads full rom.
I have high hope for the project treble, it's a good starting point for generic device rom.
I don't know about your development of the lineageos, this is the first post I saw this information.
Also, it's fun to try something, even not perfect, it's still fun to mess around.
Daruwalla said:
I'm not sure why everyone is so eager to test these GSI builds when they don't actually work 100% as stable.
LOS 15.1 development already in progress and I've been watching it, everything is looking good so far ( including camera, dual 4g/volte). Just give the devs sometime for the release.
Click to expand...
Click to collapse
Thanks for the great news. And do you mind telling that you ve been watching the development where exactly?
Thanks once again.
Tried 9.0 roms
1 Treblized os: very smooth and stable VOLTE problem.
2 Pixel experience: Smooth but thermal throttling is broken hearts up quite bit.
3 lineage os: doens't look as good as PE and yeah no VOLTE is any GSI 9 or 8.1
4 Arrow os: The best of all. Fast snappy.
5 Havoc os: Bootloop tried everything.
Tried 8.1 roms:
1 Arrow os: The best I must say. PUBG experience is great the touch is really snappy and accurate for some reason.
2 RR official: Has some weird issue maybe sound don't remember.
3RR unofficial: there were 2 unofficial builds one booted fine and the other got Bootloop. Sound was good in unofficial and boot animation is better.
4 Aquarius os: Simple and good.
5 Dot os: well I've tried this GSI on my OP5T it was amazing but in Poco it doesn't feel as stable as others.
After trying all these GSI roms the best stable snappy and thermal friendly ROM was 8.1 and 9 Arrow os.
Like if I helped you.
$hivaM Manav said:
Tried 9.0 roms
1 Treblized os: very smooth and stable VOLTE problem.
2 Pixel experience: Smooth but thermal throttling is broken hearts up quite bit.
3 lineage os: doens't look as good as PE and yeah no VOLTE is any GSI 9 or 8.1
4 Arrow os: The best of all. Fast snappy.
5 Havoc os: Bootloop tried everything.
Tried 8.1 roms:
1 Arrow os: The best I must say. PUBG experience is great the touch is really snappy and accurate for some reason.
2 RR official: Has some weird issue maybe sound don't remember.
3RR unofficial: there were 2 unofficial builds one booted fine and the other got Bootloop. Sound was good in unofficial and boot animation is better.
4 Aquarius os: Simple and good.
5 Dot os: well I've tried this GSI on my OP5T it was amazing but in Poco it doesn't feel as stable as others.
After trying all these GSI roms the best stable snappy and thermal friendly ROM was 8.1 and 9 Arrow os.
Like if I helped you.
Click to expand...
Click to collapse
Wow, arrow os was not on my tested list. :good:
Need to try it asap.
Just question: can I flash it without root status?
Adios2nd said:
Wow, arrow os was not on my tested list. :good:
Need to try it asap.
Just question: can I flash it without root status?
Click to expand...
Click to collapse
Well I'm not sure because I flashed root on every GSI because my device feels uncomplete without it but I'm sure you won't have any problem with no root and yeah in some GSI roms we have option to download with gapps/su/ or vanilla
Edit:
I needed root access because I used this universal notch fix
Go to terminal give root access and type
"wm overscan 0,90,0,0" this completely pushes the notification panel below the notch and fits perfectly!
$hivaM Manav said:
Well I'm not sure because I flashed root on every GSI because my device feels uncomplete without it but I'm sure you won't have any problem with no root and yeah in some GSI roms we have option to download with gapps/su/ or vanilla
Edit:
I needed root access because I used this universal notch fix
Go to terminal give root access and type
"wm overscan 0,90,0,0" this completely pushes the notification panel below the notch and fits perfectly!
Click to expand...
Click to collapse
2 Questions
1. I didn't intend to flash root, but when I flashed the "Encryption disabler" (that every guides suggest to flash, see attached), it became root itself. Can I not flash it?
2. Do I need to fix the notch in ArrowOS, is it not detect and adjust by itself?
Adios2nd said:
2 Questions
1. I didn't intend to flash root, but when I flashed the "Encryption disabler" (that every guides suggest to flash, see attached), it became root itself. Can I not flash it?
2. Do I need to fix the notch in ArrowOS, is it not detect and adjust by itself?
Click to expand...
Click to collapse
1. The encryption disabler is only for MIUI roms because it encrypts your data on first boot but GSI roms don't encrypt your data so you can skip flashing that after flashing GSI
2. Only Pie roms have the ability to adjust to notch currently this feature is not available in 8.1 roms so it'll look weird.
The notch situation is a bit better in Lineage 9.0.
In every ROM, ir unlock doesn't work (as expected), and volte doesn't work (expected?!).
All cameras work well.
---------- Post added at 05:14 PM ---------- Previous post was at 05:14 PM ----------
Daruwalla said:
I'm not sure why everyone is so eager to test these GSI builds when they don't actually work 100% as stable.
LOS 15.1 development already in progress and I've been watching it, everything is looking good so far ( including camera, dual 4g/volte). Just give the devs sometime for the release.
Click to expand...
Click to collapse
mind posting the link?
$hivaM Manav said:
1. The encryption disabler is only for MIUI roms because it encrypts your data on first boot but GSI roms don't encrypt your data so you can skip flashing that after flashing GSI
2. Only Pie roms have the ability to adjust to notch currently this feature is not available in 8.1 roms so it'll look weird.
Click to expand...
Click to collapse
I'm a very beginner so to flash without root:
0. Unlock bootloader
1. Flash recovery TWRP
2. In TWRP flash encryption disabler
3. Wipe (normal wipe?)
4. Reboot to recovery (Do I need this step?)
5. Flash GSI
6. Then reboot to system
Am I right?
Thanks for your answer.
PS.
If I flash the GSI with adb fastboot, do I need to flash the encryption disabler?
(In fastboot, I do the "fastboot flash system GSI.img")
Adios2nd said:
I'm a very beginner so to flash without root:
0. Unlock bootloader
1. Flash recovery TWRP
2. In TWRP flash encryption disabler
3. Wipe (normal wipe?)
4. Reboot to recovery (Do I need this step?)
5. Flash GSI
6. Then reboot to system
Am I right?
Thanks for your answer.
Click to expand...
Click to collapse
One-time process:
1. UL bootloader.
2. Flash twrp.
3. Format user data for twrp dycript then reboot to recovery again without booting to os.
4. Flash encryption disabler boot once to os.
After this process you don't have to flash the encryption file again and again because it modifies your vendor partition for treble enable. You'll have to flash this file again after flashing any MIUI rom. If you need root in GSI you can flash this file or you can skip.
Google dropped an incremental update to address the whole display flicker issue as well as a few other smaller issues. I'm running it now and can confirm its a night and day difference as far as the display. Using the refresh rate overlay, you can see it stays at 90hz indefinitely while the smooth display option is toggled. They didn't just add back the force 90hz display option like I was hoping but this achieved the same result so I won't complain.
Download link for Android 11 2.5 factory image: https://developer.android.com/preview/download
Download link for Android 11 2.5 OTA:
https://redirect.viglink.com/?forma...with Pixel 4 display fix - 9to5Google&txt=OTA
Magisk Canary on my Pixel 4XL running Android 11 Beta 2.5
All good here. Notifications are functioning.
Any idea if flashing this new version will allow me to have face unlocked back on Android 10? No luck with using the magisk module
chazall1 said:
Magisk Canary on my Pixel 4XL running Android 11 Beta 2.5
All good here. Notifications are functioning.
Click to expand...
Click to collapse
Did you update from Android 11 Beta 2.0, or did you go straight from 10 to 11 2.5?
I did flash-all without the -w, then used magisk canary, updated to the latest, and flashed the patched boot.img, and it still boot loops for me. It says there's no valid boot slot. Which options did you use in Magisk when creating the patched boot img?
matt99017d said:
Any idea if flashing this new version will allow me to have face unlocked back on Android 10? No luck with using the magisk module
Click to expand...
Click to collapse
Hi,
With the july update face unlock works just fine.
1dopewrx05 said:
Google dropped an incremental update to address the whole display flicker issue as well as a few other smaller issues. I'm running it now and can confirm its a night and day difference as far as the display. Using the refresh rate overlay, you can see it stays at 90hz indefinitely while the smooth display option is toggled. They didn't just add back the force 90hz display option like I was hoping but this achieved the same result so I won't complain.
Download link for Android 11 2.5 factory image: https://developer.android.com/preview/download
Download link for Android 11 2.5 OTA:
https://redirect.viglink.com/?forma...with Pixel 4 display fix - 9to5Google&txt=OTA
Click to expand...
Click to collapse
The smooth display setting does not fix the refresh rate at 90Hz in low light conditions.
You can achieve the same result like the force 90Hz from developer options with the following adb command:
adb shell settings put system min_refresh_rate 90.0
After this, toggling the smooth display setting will have no effect. The display refresh rate will always be 90Hz.
To disable it again do the following:
adb shell settings delete system min_refresh_rate
Edit:
First seen in this thread: https://forum.xda-developers.com/pi...force-90hz-refresh-rate-t3994149/post83118135
matt99017d said:
Any idea if flashing this new version will allow me to have face unlocked back on Android 10? No luck with using the magisk module
Click to expand...
Click to collapse
It depends how you "broke" face unlock. If it broke from updating to and older Android 11 beta then going back to Q, then yes it should fix that. If it broke due to corrupting your Persist.img then no, the only way to fix that is to have a backup of your Persist from when it was good and manually restoring the old persist.img.
I flashed the incremental 2.5 update and face lock did not work. I then downloaded Android 10 July and that brought everything back to normal as it should. I tried this numerous times before the incremental update to no avail. I'm so glad that they fixed it!
Update:
SDK Platform-Tools: r30.0.4
Does downgrade to MIUI 11 causing any problem with sensor lost? im planining to downgrade, just curious if anyone experience problems after downgrading?
EDIT: for those interested in this thread and wanted to downgrade..in my experience downgrading cause fingerprint sensor lost..and i was able to bring back fod only after flashing miui 12 back
Dadovvv said:
Does downgrade to MIUI 11 causing any problem with sensor lost? im planining to downgrade, just curious if anyone experience problems after downgrading?
Click to expand...
Click to collapse
You can downgrade safely, don't worry
XDRdaniel said:
You can downgrade safely, don't worry
Click to expand...
Click to collapse
Did u even try to downgrade to miui 11?
Hmm i blindly believe u...and now I lost fingerprint options. and I didn't create backup of persist.img
Hope other sensors are fine. Please in future don't answer anyone with guess and if u are not sure.
EDIT: Tried everything to back fingerprint on miui 11 but fails. All other sensor is fine even L1 widevine is ok. After flashing MIUI 12 fingerprint is back but i think it working slower (maybe placebo effect)
Dadovvv said:
Did u even try to downgrade to miui 11?
Hmm i blindly believe u...and now I lost fingerprint options. and I didn't create backup of persist.img
Hope other sensors are fine. So please don't answer anyone with guess and if u are not sure.
EDIT: Tried everything to back fingerprint on miui 11 but fails. All other sensor is fine even L1 widevine is ok. After flashing MIUI 12 fingerprint is back but i think it working slower (maybe placebo effect)
Click to expand...
Click to collapse
Hey,
When i had a trouble, or stutter on my fingerprint on my oneplus 3, to avoid that, the tips is to delete all fingerprint, and restart saving new one. Try it and tells me if it works.
FrostStaff said:
Hey,
When i had a trouble, or stutter on my fingerprint on my oneplus 3, to avoid that, the tips is to delete all fingerprint, and restart saving new one. Try it and tells me if it works.
Click to expand...
Click to collapse
i dont have any options related to fingerprint after downgrade (on CIT test fingerprint sensor is not available-fail), so i cant remove or delete any of them. anyway thanks for answer i give up an back to miui12 all working good now.
Dadovvv said:
i dont have any options related to fingerprint after downgrade (on CIT test fingerprint sensor is not available-fail), so i cant remove or delete any of them. anyway thanks for answer i give up an back to miui12 all working good now.
Click to expand...
Click to collapse
my phone too. version 8.128g
Downgrading means a clean install and fastboot method to be safe so you cant have bugs
Mastakony said:
Downgrading means a clean install and fastboot method to be safe so you cant have bugs
Click to expand...
Click to collapse
I know what is downgrade. i did clean install and lost fingerprint options. this is a same issue like it was on mi9t pro where downgrade causing some sensors lost. Thats why i asked here is anyone experience problem after downgrade. but unfortunately people without knowing answering.
@Dadovvv May i ask you why you wanted to revert MIUI please ?
FrostStaff said:
@Dadovvv May i ask you why you wanted to revert MIUI please ?
Click to expand...
Click to collapse
miui11
no bugs, better battery.
Dadovvv said:
I know what is downgrade. i did clean install and lost fingerprint options. this is a same issue like it was on mi9t pro where downgrade causing some sensors lost. Thats why i asked here is anyone experience problem after downgrade. but unfortunately people without knowing answering.
Click to expand...
Click to collapse
I did the same thing without any FOD problem (V12.0.3.0.QJKMIXM to V11.0.2.0.QJKMIXM miflash).
But i lost fingerprint with a Weekly EU rom.
I solved the problem with this method:Flashed with miflash V12.0.3.0.QJKMIXM clean all and lock then :Go to the CIT menu press the 3 dot in the top right of screen scroll down calibrate the FOD -> place a white thing on FOD click start before next step put something black on FOD and press next...wait until finish close restart and add your fingerprint(Thanks to tze_vitamin).that's all...
NOSS8 said:
I did the same thing without any FOD problem (V12.0.3.0.QJKMIXM to V11.0.2.0.QJKMIXM miflash).
But i lost fingerprint with a Weekly EU rom.
I solved the problem with this method:Flashed with miflash V12.0.3.0.QJKMIXM clean all and lock then :Go to the CIT menu press the 3 dot in the top right of screen scroll down calibrate the FOD -> place a white thing on FOD click start before next step put something black on FOD and press next...wait until finish close restart and add your fingerprint(Thanks to tze_vitamin).that's all...
Click to expand...
Click to collapse
i was downgrade 12.0.3.0eu to 11.0.6.0eu (clean all and lock method) and lost FOD. Tried everything to back FOD and only solution for me was flashing back 12.0.3.0. Didn't try with calibration on CIT as i didn't know for that..all i was tried in CIT was fingerprint test which failed. Thanks
so used miflash to downgrade? did you upgrade to 11.0.6 then ? Im having problems with 12.0.4 widevine not working and mediaserver having 70% battery consumption
Saphyres said:
so used miflash to downgrade? did you upgrade to 11.0.6 then ? Im having problems with 12.0.4 widevine not working and mediaserver having 70% battery consumption
Click to expand...
Click to collapse
yes i was using miflash to downgrade and i was downgrading from 12.0.3.0 to 11.0.6.0 and i was lost fingerprint, since 11.0.6.0 is last and only MIUI 11 for EU i was not able to flash any other 11. so i was back on MIUI 12 again to fix fingerprint problem.
Right now im using 12.0.4.0 Indonesian rom with locked bootloader and im pretty happy with it, im only missing miui launcher right now.
Dadovvv said:
Does downgrade to MIUI 11 causing any problem with sensor lost? im planining to downgrade, just curious if anyone experience problems after downgrading?
EDIT: for those interested in this thread and wanted to downgrade..in my experience downgrading cause fingerprint sensor lost..and i was able to bring back fod only after flashing miui 12 back
Click to expand...
Click to collapse
Anybody know how I downlograd to miui 10 successfully
chickentikka007 said:
Anybody know how I downlograd to miui 10 successfully
Click to expand...
Click to collapse
miui 10 doesn't exist for POCO f2 pro