Related
I've currently got the Defender but it's WAY too thick and the front bezel part is in the way too much.
In the past I've just used a basic slim TPU or similar case coupled with a vertical slide in holster. My problem has been finding a holster that is big enough to fit the phone with the slight bulk added by the cases I know of. Any thoughts?
I never drop my phones and they always look brand new when I sell them a year later, so the defender is way overkill for me...anyone interested in it because I'll be selling it when I find something new.
Casemate barely there. You can thank me later..
Sent @ 04:20
mrrick said:
Casemate barely there. You can thank me later..
Sent @ 04:20
Click to expand...
Click to collapse
Ok, that works for the case, but I need a holster that will work with it installed...
pkley said:
Ok, that works for the case, but I need a holster that will work with it installed...
Click to expand...
Click to collapse
Hmm, must've missed that part, sorry.. Holsters are soooo 2001 though..
Sent @ 04:20
Qmadix makes a slim case/holster combo. Should be perfect for you.
jnewingham said:
Qmadix makes a slim case/holster combo. Should be perfect for you.
Click to expand...
Click to collapse
That looks pretty good, although it doesn't look like the camera portion is thick enough to protect the camera at all, even by a millimeter. Do you have one? Does it offer any protection at all?
I've been using the Otterbox commuter case with the Platinum holster from Best Buy. http://forum.xda-developers.com/showthread.php?t=990032
pkley said:
That looks pretty good, although it doesn't look like the camera portion is thick enough to protect the camera at all, even by a millimeter. Do you have one? Does it offer any protection at all?
Click to expand...
Click to collapse
Ok, so I got one anyway and the answer is NO, it doesn't protect the camera at all. The Camera bezel is perfectly flush with the case. That being said, it's the only real negative about it. It's SUPER easy to take off if you want to go naked for some reason, the holster works great and the case itself provides just enough grip and heft to make it easy to hang onto.
I'd say about a 8/10...
anyone want a lightly used Defender?
I use the Seidio Innocase but it might be too bulky for you as well :\
I'm searching for a holster/pouch/belt clip for my phone. It's not to protect the phone, but the headset instead. I always go around with the headset connected and eventually they go bad, possibly because my phone is always in my pocket and the cord gets alot of twisting. I'm now on my fourth headset since buying the phone last December, and think that to protect them better I need to wear the phone outside...
My phone already has a fishbone case, so the accessory has to be large enough to fit it. I also want the ports to be easily accessible, so the headset doesn't have to be disconnected when I take the phone out, and possibly so I can charge the battery on the go with my power bank. I've seen some possibilities, but they're typically too small to accompdate my existing case, or the clips come with cases themselves and probably wouldn't properly fit mine. So I'm seeking some advice to find a suitable clip/holster.
Sent from my GTablet using Tapatalk
Hi folks,
Just wanted to share my experience with this new case that I got last week, it's called Crusta, made by Amzer, I have used Amzer products in the past, but this case is something very different from their regular stuff I have used in the past.
Since, I have replaced 2 screens on my S5 in last 4 months, I really wanted to get something which protects the device, don't want to spend more money on repairs, initially thought of going ahead with OtterBox but I saw an ad on Facebook for Crusta. Having used Amzer in past, I ordered it (even got 25% off part of their promotion!)
Really loving the case, it is a bit on the bulky side, but not as much as an otter box, it is right mix of protection and style, they claim it is 6 feet drop proof, it did fall out of my pocket 2-3 times and no visible damage. The thing i really like about this case is that it came with a very nice and tough glass screen protector and a belt clip. Really neat bundle. The back of the case is very nice and stylish with clear backing. Only wished this case was waterproof, but for $45 its a great buy, I got yellow and black combo, but really good color options, lots of them.
If you are looking to get an otterbox, i would suggest you give this a try and save some money!
Have a look here - www.amzer.com/crusta
I will be posting pictures after I manage to get some decent pictures from my second phone
cupcake2301 said:
Hi folks,
Just wanted to share my experience with this new case that I got last week, it's called Crusta, made by Amzer, I have used Amzer products in the past, but this case is something very different from their regular stuff I have used in the past.
Since, I have replaced 2 screens on my S5 in last 4 months, I really wanted to get something which protects the device, don't want to spend more money on repairs, initially thought of going ahead with OtterBox but I saw an ad on Facebook for Crusta. Having used Amzer in past, I ordered it (even got 25% off part of their promotion!)
Really loving the case, it is a bit on the bulky side, but not as much as an otter box, it is right mix of protection and style, they claim it is 6 feet drop proof, it did fall out of my pocket 2-3 times and no visible damage. The thing i really like about this case is that it came with a very nice and tough glass screen protector and a belt clip. Really neat bundle. The back of the case is very nice and stylish with clear backing. Only wished this case was waterproof, but for $45 its a great buy, I got yellow and black combo, but really good color options, lots of them.
If you are looking to get an otterbox, i would suggest you give this a try and save some money!
I will be posting pictures after I manage to get some decent pictures from my second phone
Click to expand...
Click to collapse
I've been looking for a case/holster combination and just came across this one. I had previously ordered the Seidio Dilex and was not happy with it mainly because it is so slick. The Seidio adds quite a bit of bulk also but I think I'd be ok with that if it just wasn't so slippery. Can you tell me a little about the holster? I need something that holds the phone safely. I prefer holsters that rachet and need a little force to spin around. What do you think about this one?
How'd you get 25% off? I'm interested in possibly ordering one.
v3rn said:
How'd you get 25% off? I'm interested in possibly ordering one.
Click to expand...
Click to collapse
Back2School is the code. It shows it right on the top of the amzer page
palolake said:
I've been looking for a case/holster combination and just came across this one. I had previously ordered the Seidio Dilex and was not happy with it mainly because it is so slick. The Seidio adds quite a bit of bulk also but I think I'd be ok with that if it just wasn't so slippery. Can you tell me a little about the holster? I need something that holds the phone safely. I prefer holsters that rachet and need a little force to spin around. What do you think about this one?
Click to expand...
Click to collapse
So I also have the Seidio Dilex and I ordered a Crusta just to see what the differences were. Here's what I noticed aside from what the OP stated:
-The belt clip, where it attaches to the belt, has a lot tension so it grabs tightly
-It is a U-Clip on the clip, but instead of a solid piece it is two "teeth" that wrap underneath the belt
-Phone case seems to fit loosely when the screen is facing out/clips in very tightly with screen facing inward (I prefer screen facing in)**
-The rotating clip looks like a gear assembly. When you turn it, it settles into the grooves and won't spin so it is omni-directional
-Online photos looks like the camera would be touching if laid on its back. The outer edge of the case keeps it from touching so no worries there
-Heart rate sensor is easily accessed and works well. Fingerprint scanner will work, but you will have to be accurate since the rubber has no give
-The Amzer is thicker overall than the Seidio Dilex and probably the exact same width as the Seidio would be if the kickstand went all the way up
**Might just be my case, OP would have to chime in
My overall so far is that I like it, but I want to test out the belt holster more before I wholeheartedly recommend it. The case is good and I love the tempered glass screen protector that came with it. The rubber is not slick at all and has a fake stitching look around the front face for aesthetics I suppose? Also, with this case on it barely fits in my Nathan's runners belt. Granted it is the smallest runner's belt, but with the grippy case rubber around it I won't be able to easily take it in and out to change songs or answer calls after I get it in there.
I'd like to post some pictures, but I need some suggestions of the best place to upload them for posting here? I just wondered what others would use and if you would like any specific pictures I am happy to oblige. I'll do a breakdown and couple of size comparison shots with the Dilex.
Edit: I personally won't be using the fingerprint scanner because as I found out, it you register a fingerprint while the case is on you should be able to unlock it. If you register it with the case off and put the case on, it most likely won't accept the scan. My experience was scanning in a fingerprint with the case on and took the case off to take pictures and it wouldn't take my fingerprint at that depth. If you are never going to take the case off this may work for you. However if you have pre-registered fingerprints and you put the case on you may lock yourself out. Just my experience.
palolake said:
I've been looking for a case/holster combination and just came across this one. I had previously ordered the Seidio Dilex and was not happy with it mainly because it is so slick. The Seidio adds quite a bit of bulk also but I think I'd be ok with that if it just wasn't so slippery. Can you tell me a little about the holster? I need something that holds the phone safely. I prefer holsters that rachet and need a little force to spin around. What do you think about this one?
Click to expand...
Click to collapse
I would suggest this case for sure, though I don't buckle the phone to my waist much, but the holster is really nice and high quality, the clip for rotation is also very smooth but at the same time not 'loose'. The video on their site says to put the phone face in for best results, but even face out is ok, the holster really holds the phone in really well.
My past experience with a seidio case for my S4 wasn't that great either, they tear up after some time and the support team is really not upto the mark. This case is not exactly thin, but it's a lot less than Otterbox, also this case has very very good grip on the TPR ring they have provided, so it won't be slippery like Seidio for sure.
v3rn said:
How'd you get 25% off? I'm interested in possibly ordering one.
Click to expand...
Click to collapse
I ordered during the independence day sale, i think they have back to school sale right now, which i'm going to use to order a case for my friend's iPhone 5s for which they have the crusta now. Try code BACK2SCHOOL - might work.
I will try to post some pictures today.
Regarding the Amzer Crusta!!!!
OMG that case is beautiful. Just looked online. That is absolutely a find. Called then and long to order.
Thank you!
Sent from my SM-G900T using XDA Premium HD app
I made an Imgur album with 18 pictures of the case. I added captions to a few of them to make more sense of what you're looking at. I hope this helps anyone looking to purchase this and if you have questions, just ask.
http://imgur.com/a/mfTZO#0
I'm notoriously bad about dropping mobile devices, so I'm looking for a good rugged case that doesn't add too much bulk to the tablet. Does anyone have any recommendations?
Edit: Oops, that should be for the 10.5, not the 10.6!
I went for this one and although it weighs 290g I'm confident it's strong enough to protect from drops and other than the weight I wouldn't describe it as bulky:
http://www.amazon.co.uk/gp/product/B00N46ACUA/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Also unless you buy one made of carbon fibre (£££££) you will of course add some size to the tablet regardless of which case you go for, it's a trade off between protection and dimensions.
pjd007 said:
I went for this one and although it weighs 290g I'm confident it's strong enough to protect from drops and other than the weight I wouldn't describe it as bulky:
http://www.amazon.co.uk/gp/product/B00N46ACUA/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Also unless you buy one made of carbon fibre (£££££) you will of course add some size to the tablet regardless of which case you go for, it's a trade off between protection and dimensions.
Click to expand...
Click to collapse
I definitely expect a protective case to add a little bulk, but the Otterbox for this tablet is just WAY too bulky.
I think I found the case you referred to on the US Amazon site at http://www.amazon.com/gp/product/B00N46ACUA/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A2IHZFOHOQ0WG8. When I was looking for that, I also found this one: http://www.amazon.com/gp/product/B00L2N58BA/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2IHZFOHOQ0WG8. Would you recommend one over the other?
I've also been looking at this case: http://www.amazon.com/dp/B00LEY95HU...lid=2CCEFOTVC1FPB&coliid=I3S2LVSVANEW8G&psc=1, but I'm not sure if a silicone-only case will give me the protection I need, and I prefer one that has a cover/stand.
Opinions?
jfleegle said:
I definitely expect a protective case to add a little bulk, but the Otterbox for this tablet is just WAY too bulky.
I think I found the case you referred to on the US Amazon site at http://www.amazon.com/gp/product/B00N46ACUA/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A2IHZFOHOQ0WG8. When I was looking for that, I also found this one: http://www.amazon.com/gp/product/B00L2N58BA/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2IHZFOHOQ0WG8. Would you recommend one over the other?
I've also been looking at this case: http://www.amazon.com/dp/B00LEY95HU...lid=2CCEFOTVC1FPB&coliid=I3S2LVSVANEW8G&psc=1, but I'm not sure if a silicone-only case will give me the protection I need, and I prefer one that has a cover/stand.
Opinions?
Click to expand...
Click to collapse
I think the only difference between them is the colour used and the fact the stand can sit the tab in portrait but the materials look the same.
Yeah that third one doesn't have a stand which was something I wanted also it doesn't cover the screen so dust etc. will get onto it plus I reckon the case I have could potentially protect against a small amount of liquid.
Also that case looks like it'll feel quite clunky in your hand.
Best thing to do is order one then return it if you're not happy.
good protection
which one did you finally buy?
I'm also looking for a good rugged case for my wife's Galaxy Tab S 8.4. We bough a toughbook and she still managed to get a crack on its side.... She's dropped her tablet and the screen never came back on. It was even protected by the EXO rugged hybrid armor case, AND it was in her purse. It just slipped off of her winter coat on to the ground, and that was the end. So we're getting it fixed, but need a heavy duty case. If any suggestions on what you did buy, it would be appreciated.
I am looking for some rugged skins for use in the car the ones i found were:
Otterbox+ slipgrip
This is the best but most expansive:
Ram mounts intelliskin + GSD dock
kraaienest said:
I am looking for some rugged skins for use in the car the ones i found were:
Otterbox+ slipgrip
This is the best but most expansive:
Ram mounts intelliskin + GSD dock
Click to expand...
Click to collapse
Leave you looked at the Supcase Unicorn Beetle?
Sent from my SM-T800 using XDA Free mobile app
The most rugged case I found is the BobjGear Rugged Case for the Tab-S, plus it has cooling because the tab-s runs warm.
Lots of drops from my grandchildren, even down a flight of 13 wooden stairs, and no problems. And it is not expensive either.
For most phones and tablets it's pretty easy to find decent cases, iPhone and iPad Users are spoilt for choice, Samsung useres can also pick and choose how they like, even for the Nexus 5X and 6P one can find an abundance of cases in any color shape or form. But not for the Pixel C - doubtless this is because of the slender market for this tablet. I have been looking all over the net for a simple TPU case for the Pixel C, you know the type of silicone case that just covers the back of the device but not the screen. All I could find was universal folio cases or smart cases with a lid. I even tried my luck on searching Chinese wholesale but no luck. If anyone has come across a simple back cover only TPU or hard shell case that only covers the back please let me know.
Thanks so much.
x7aa1186 said:
For most phones and tablets it's pretty easy to find decent cases, iPhone and iPad Users are spoilt for choice, Samsung useres can also pick and choose how they like, even for the Nexus 5X and 6P one can find an abundance of cases in any color shape or form. But not for the Pixel C - doubtless this is because of the slender market for this tablet. I have been looking all over the net for a simple TPU case for the Pixel C, you know the type of silicone case that just covers the back of the device but not the screen. All I could find was universal folio cases or smart cases with a lid. I even tried my luck on searching Chinese wholesale but no luck. If anyone has come across a simple back cover only TPU or hard shell case that only covers the back please let me know.
Thanks so much.
Click to expand...
Click to collapse
+1
I also want a TPU case and haven't found anything anywhere - ebay, amazon, vendor sites
This is exactly what I'm looking for as well. All I can find are folios. :/
Sent from my Pixel C using Tapatalk
yep. this. i want the rubber bumper case type cover because the back of the device is so slick that it tends to want to slide off my lap. also, it would be nice to have something to soften the bezel edge because it can dig into your hands if you're holding it for a long time.
Totally agree. There seems to be a Chinese design for a bumper case, however it doesn't seem possible to order it at the moment. Anyone else had any luck finding one ?
Link to Chinese design m.alibaba.com/product/60386341810/10-2-inch-silicone-tablet-bumper.html
x7aa1186 said:
Totally agree. There seems to be a Chinese design for a bumper case, however it doesn't seem possible to order it at the moment. Anyone else had any luck finding one ?
Link to Chinese design m.alibaba.com/product/60386341810/10-2-inch-silicone-tablet-bumper.html
Click to expand...
Click to collapse
http://m.alibaba.com/product/60386341810/10-2-inch-silicone-tablet-bumper.html
Potentially
Came across this guy that might fit the bill:
amzn.com/B01CQTFRAK
No reviews and takes forever to ship. If it were cheaper I'd definitely take the jump, but I'm a bit skeptical...
Does anybody know about these? skinomi.com/google-pixel-c.html
dcwilcox said:
Came across this guy that might fit the bill:
amzn.com/B01CQTFRAK
No reviews and takes forever to ship. If it were cheaper I'd definitely take the jump, but I'm a bit skeptical...
Click to expand...
Click to collapse
I already contacted them, the description is wrong. They sell "normal" pu leather folios, some are bundled with headphones or screen protectors. They removed the product i mentioned in my request but all other bundles are still listed with the wrong description.
what a freakin' tease. i would have loved to have had that clear tpu case.
All products mentioned are found on US Amazon.com
So far the only TPU case I have seen that's for Pixel C <--- does NOT fit Pixel C as customer lefted a photo review on the product he received.
http://www.amazon.com/Junsi-Leather-Headphone-Google-Tablet/dp/B01CQTFSKO
I do not have it in my possession to test the fitment yet, just wanna get the words out with others that's looking for one.
(granted the demo photos doesn't show pixel C in it, but some other products. Just hope these China vendors get the fitment right.)
Other interesting alternatives I have seen so far is the full body coverage skin
http://www.amazon.com/Skinomi%C2%AE-TechSkin-Protector-Replacement-Anti-Bubble/dp/B017L0UKOW
Personally I'm currently using Moko's folio cover as the additional thickness it added is still deem acceptable to me and does the job.
http://www.amazon.com/MoKo-Google-Pixel-Case-Lightweight/dp/B019TOM5PU
MojoFilter said:
Does anybody know about these? skinomi.com/google-pixel-c.html
Click to expand...
Click to collapse
Hey there, the skinomi skins work just fine. A bit of a pain to apply but not too bad, just watch their intructional Video. But this is just a Skin and no case, so no drop protection really.
SonySteve said:
All products mentioned are found on US Amazon.com
So far the only TPU case I have seen that's for Pixel C
http://www.amazon.com/Junsi-Leather-Headphone-Google-Tablet/dp/B01CQTFSKO
I do not have it in my possession to test the fitment yet, just wanna get the words out with others that's looking for one.
(granted the demo photos doesn't show pixel C in it, but some other products. Just hope these China vendors get the fitment right.)
Other interesting alternatives I have seen so far is the full body coverage skin
http://www.amazon.com/Skinomi%C2%AE-TechSkin-Protector-Replacement-Anti-Bubble/dp/B017L0UKOW
Personally I'm currently using Moko's folio cover as the additional thickness it added is still deem acceptable to me and does the job.
http://www.amazon.com/MoKo-Google-Pixel-Case-Lightweight/dp/B019TOM5PU
Click to expand...
Click to collapse
Thanks SonySteve I have the skinomi techskin on. Just such a shame though, as I would have loved a simple bumper case.
x7aa1186 said:
Hey there, the skinomi skins work just fine. A bit of a pain to apply but not too bad, just watch their intructional Video. But this is just a Skin and no case, so no drop protection really.
Click to expand...
Click to collapse
That's exactly my concern also. At most it'll just prevent scratches on the original metal body, wouldn't prevent / provide enough protection from possible little bumps / drops during daily uses.
SonySteve said:
That's exactly my concern also. At most it'll just prevent scratches on the original metal body, wouldn't prevent / provide enough protection from possible little bumps / drops during daily uses.
Click to expand...
Click to collapse
Exactly, a Skin is not enough, a Folio Case will protect the Pixel C allround but I really dislike the front Display flap. Very annoying. I opted for buying the skinomi techskin combined with this http://www.amazon.com/Booncover-Uni...=UTF8&qid=1463390156&sr=8-2&keywords=Reboon+l
This is expensive though. Would have much prefered a simple bumper case. Grrr.
Negative on the potential TPU case I shared the other day.
A customer that got the product, left a photo review saying it aren't the right fitment.........
http://www.amazon.com/Junsi-Leather-Headphone-Google-Tablet/dp/B01CQTFSKO
This is frustrated, I can't find no bumper case for this device.
i thought about trying to find a similar shaped tablet and using a tpu case for it and i would just make my own camera/speaker holes. not the prettiest solution but i think it would get the job done. the closest thing i could find to the pixels dimensions was the galaxy tab 10.1. so i'm thinking about picking up this case:
https://www.amazon.com/SOJITEK-BPA-...568&sr=8-33&keywords=galaxy+tab+10.1+silicone
Dr. Light said:
i thought about trying to find a similar shaped tablet and using a tpu case for it and i would just make my own camera/speaker holes. not the prettiest solution but i think it would get the job done. the closest thing i could find to the pixels dimensions was the galaxy tab 10.1. so i'm thinking about picking up this case:
https://www.amazon.com/SOJITEK-BPA-...568&sr=8-33&keywords=galaxy+tab+10.1+silicone
Click to expand...
Click to collapse
Let u s know how well it fits. Thank you and all the Best
I ordered a cheap chinese tpu case for a samsung galaxy tab 10.1 but it does not fit.
The corners of the Samsung device are rounder than the pixel c. Height and width are ok.
I had to remove the corners of the case, now the tablet fits, but the corners are needed to give the case stability and keep it around the tablet.
Without the corners the case slips down of the tablet easily. I hoped it would fit but without the stability it is useless for me...
Hello I am wondering if anyone knows of a good quality horizontal belt holder that works with the g5 and allows for a case? My case is not very thick but I would not call it slim either.
To give you an idea of what I mean by good quality I want it to be leather and the last one that I had was actually fake leather and the support was cardboard. That one got decent ratings on Amazon for quality but when it fell apart it became clear that it was not good.
I use this belt clip on my V10 since I was unable to to find a holster for it. It works great! and it fits the G5.
http://www.amazon.com/mophie-Belt-C...&redirect=true&ref_=oh_aui_detailpage_o09_s00
I also use the Seideio LGG4 Cased jholsteras well
thexder1 said:
Hello I am wondering if anyone knows of a good quality horizontal belt holder that works with the g5 and allows for a case? My case is not very thick but I would not call it slim either.
To give you an idea of what I mean by good quality I want it to be leather and the last one that I had was actually fake leather and the support was cardboard. That one got decent ratings on Amazon for quality but when it fell apart it became clear that it was not good.
Click to expand...
Click to collapse
Let me know if my suggestion helps
I use this belt clip on my V10 since I was unable to to find a holster for it. It works great! and it fits the G5.
http://www.amazon.com/mophie-Belt-Cl...ilpage_o09_s00
I also use the Seideio LGG4 Cased jholsteras well
Click to expand...
Click to collapse
I never used one of those, but every case or holder with a plastic clip I have had has broken within 3 months. I am not sure I want to spend that money on something that my experience indicates would probably not last very long.
I almost forgot that in previous experience I have had problems with clips like that causing the phone to fall every time I get out of my car and I noticed a few reviews mentioning that on that clip as well. Seems like a bit of a risk to me.
Found this thread and the suggestion by @shaun0207 and figured I'd give it whirl! Thanks for that!
I have the Otterbox Defender (too damn bulky), the Evocel holster/clip (too flimsy and difficult to remove from belt clip) and now am going to try the Spigen walletcase in conjunction with the mophie universal clip
I'll let you guys know how it works out
MIKESTONY said:
Found this thread and the suggestion by @shaun0207 and figured I'd give it whirl! Thanks for that!
I have the Otterbox Defender (too damn bulky), the Evocel holster/clip (too flimsy and difficult to remove from belt clip) and now am going to try the Spigen walletcase in conjunction with the mophie universal clip
I'll let you guys know how it works out
Click to expand...
Click to collapse
Great! I have been seriously considering just getting the few tools and some materials and just making my own since it seems very hard to find ones that are well made. If I do I would basically have a thick, stiff leather back (I have a good sized piece of lace leather that I think would work well for that), a couple of belt loops either made from that same thick leather or a slightly thinner more flexible leather, then a soft leather for the rest of the holder with a flap for closing and probably just some cheap magnets hidden within for holding it closed. Should be pretty simple to put together (though there would likely be some trial and error involved).
thexder1 said:
I never used one of those, but every case or holder with a plastic clip I have had has broken within 3 months. I am not sure I want to spend that money on something that my experience indicates would probably not last very long.
I almost forgot that in previous experience I have had problems with clips like that causing the phone to fall every time I get out of my car and I noticed a few reviews mentioning that on that clip as well. Seems like a bit of a risk to me.
Click to expand...
Click to collapse
I only had it come out of the clip once and it was in the car. If you can, check it out in Best Buy. It really holds the phone well.