So i got this problem after i tried to update (OTA) from 4.2.2 to 4.4.2
it started updating and i could see the android logo with the loading bar going on however
at the end of the update installation process it said Error underneath the logo and nothing else happend
i tried to restart the tablet but stopped at the lenovo logo just being stuck there after that i tried to hard reset it
however no succes then i went to look online on how to flash it back to its stock rom but with the SP Flashtool i always
get the C++ error when loading in the scatter file :/
So my question ... what am i doing wrong or is there something else you guys might know of?
Related
guys i need serious help. i have had this device (name in title) for a while and i had it rooted. when resetting it from its menu it got stuck on android is upgrading screen for a couple of days. so i decided to restore it using sp flash tool. i went on needrom and got the latest rom from there BIG MISTAKE . i then flashed it correctly and it had booted but it would not let me use the screen because it had froze. so then forcing it to power off by removing the battery. unfortunately it never booted up again. now when trying to flash the first rom available it only shows the red bar and then i get an error ''BROM:S_ft_enable_dram_failed(4032).
i have noticed that when it booted up after flashing the rom it booted up with a htc bootanimation so the rom was a custom rom.
the setup screen also looked messed up.
i was told to right click on the preloader when it shows up and install the correct drivers manually. i did but i also noticed it had a yellow triangle and was named mt65xxx preloader. once updating it it is now called something like mediateck vcom preloader or close to that but when connecting the phone it oonly stays there for 2 seconds and disappears and never comes back unless i dissconnect and connect the phone again.
someone please help and if you need more info just message me.
Hey guys,
My wife's Galaxy S6 - SM-G920P has been stuck in a boot-loop the last few days. I am unable to get past the login screen before it restarts. I cleared the cache and tried everything from the youtube link below, but I am running into a problem with the ODIN firmware update. I am using ODIN v3.12 and I am trying to install the below firmware update. Everything works fine, the firmware is uploaded to the phone. However, when the phone reboots and the blue screen comes up with installing updates, it keeps freezing at 32%, followed by an erasing of the update. The phone then repeats the boot loop again.
I am out of ideas and was hoping someone has encountered this issue before and can point me in the right direction.
Thanks in advance.
youtube.com/watch?v=YJi_w4c0KyE
FIRMWARE UPDATE
.sammobile.com/firmwares/galaxy-s6/SM-G920P/SPR/confirm/G920PVPS4DQF1/178566/
Bump...still having the problem
Try to change the version of ODIN and the firmware
did both, and now I can't even get to the login screen...any ideas on how to get out of the boot loop?
bump....still having the issue
hello guys
new user here.
So heres the issue that im hoping you lovely people can help out with.
I have a samsung s6 canada (bell) version SM-G90W8 that when i was updating the software it crashed on me and corrupted the software of.
I downloaded odin and tried to flash the stock firmware back on the phone. I made sure i downloaded the right version of the flash file and flashed it. all went well. Odin successfully flashed the file and it gave me the green light that said pass!
My phone rebooted and the installing update screen came up. It was installing and at about 25% it got stuck and gave me an error that had a yellow triangle with an exclamation mark inside of it with an android logo. Below it is says " error !"
I tried to reflash the stock rom a few times and everytime it was success full when the phone booted it gave me the same error.
Someone PLEASE PLEASE PLEAAASE HELP!!!
thank you
shahood24 said:
hello guys
new user here.
So heres the issue that im hoping you lovely people can help out with.
I have a samsung s6 canada (bell) version SM-G90W8 that when i was updating the software it crashed on me and corrupted the software of.
I downloaded odin and tried to flash the stock firmware back on the phone. I made sure i downloaded the right version of the flash file and flashed it. all went well. Odin successfully flashed the file and it gave me the green light that said pass!
My phone rebooted and the installing update screen came up. It was installing and at about 25% it got stuck and gave me an error that had a yellow triangle with an exclamation mark inside of it with an android logo. Below it is says " error !"
I tried to reflash the stock rom a few times and everytime it was success full when the phone booted it gave me the same error.
Someone PLEASE PLEASE PLEAAASE HELP!!!
thank you
Click to expand...
Click to collapse
Use Samsung SmartSwitch to reinstall the Software
Sometimes you need to wipe the data partition in recovery mode. As you already tried flashing firmware.
Or download your firmware from another page. Or just redownload what you got. Also make sure 100% its the most recent firmware for your device. Then report back what you find
U99Dev said:
Use Samsung SmartSwitch to reinstall the Software
Click to expand...
Click to collapse
Hey so I tried that route as well but it said that smart switch doesn't support my device.
When i got the phone it was already dead (stuck at logo). then i flashed the phone's firmware. it did succeed but wont boot up. some weird thing happend and i flashed twrp (hoping to revive through custom ROM instead). it was very difficult but i succeed. When i was finally flashing custom ROM ( it took a hell of a time) , the process finished and at the initial boot-up, the screen went crazy like when you see your T.V doesn't have signal like burrrrrr.
I took it to nearest technicians but they said i have corrupted my partition and there is no way to fix it.
Now the screen is stuck at " firmware update encountered an issue. please select recovery mode in kies and try again.
Hoping response asap.
Desperate
Thanks in advance.:good:
HELLO MEMBERS
I was working on a device D850 stuck on factory reset status 2 blue screen and used TOT method, after a lot of struggle and head scratch i finally got the device onto flashtool, but the problem i am facing now is that despite whatever i do the phone is constatnly in a boot loop for a brief moment it will show a factory reset sign but then the tail chasing starts again. this also happened during TOT
i am using
LGD850_20140613_LGFLASHv160.dll
and
LGD850AT-01-V10d-310-410-JUN-19-2014+0.tot file
but its t working as mentioned i am following every step carefully. and due to my sluggish internet I had struggled with download process
a help will be much appreciated , it always fail at 94% and start the loop process
Ps: i am also unable to access stock recovery