Hey guys,
My wife's Galaxy S6 - SM-G920P has been stuck in a boot-loop the last few days. I am unable to get past the login screen before it restarts. I cleared the cache and tried everything from the youtube link below, but I am running into a problem with the ODIN firmware update. I am using ODIN v3.12 and I am trying to install the below firmware update. Everything works fine, the firmware is uploaded to the phone. However, when the phone reboots and the blue screen comes up with installing updates, it keeps freezing at 32%, followed by an erasing of the update. The phone then repeats the boot loop again.
I am out of ideas and was hoping someone has encountered this issue before and can point me in the right direction.
Thanks in advance.
youtube.com/watch?v=YJi_w4c0KyE
FIRMWARE UPDATE
.sammobile.com/firmwares/galaxy-s6/SM-G920P/SPR/confirm/G920PVPS4DQF1/178566/
Bump...still having the problem
Try to change the version of ODIN and the firmware
did both, and now I can't even get to the login screen...any ideas on how to get out of the boot loop?
bump....still having the issue
Related
Hello
About three days ago I went to turn on my N8000 and it got stuck in the "Samsung GALAXY Note 10.1" logo. At first I thought it was updating something or just taking longer to start, but after one day I realized that it wasn't going to start at all. So I tried to do a factory reboot but found out that the tablet won't boot into the bootloader (Power + vol up), it just kept going into the galaxy logo. It can, however, boot into download mode, so I started checking on the page what could solve my problem. I tried installing the CWM recovery using ODIN 1.85, the flash was successfull but the device will still not boot into recovery mode. After that I read that installing a stock firmware could solve the issue, so I downloaded the Kit Kat version and flashed it, rebooted but nothing. I found some topic that a guy had to use a .pit file along the kit kat firmware, did that too and nothing.
So here I am stuck with my tablet bricked and without knowing what else to do, so I was hoping to get some help from you guys.
Thanks in advice!
So I rooted my s6 a few months ago, everything has been fine up till now, but, the phone is no longer able to boot past the 'Three' loading screen. I've tried rebooting and factory resetting. I have even tried to install the original firmware but Odin fails every time. Can anyone help?
Update: managed to install the stock firmware with Odin after installing TWRP, still having the same issue though. Going to retry it.
Hi guys, so recently I bought a Galaxy S6 Verizon off of eBay. I got it for fairly cheap because it was stuck in a boot loop. I usually have no problem fixing stuff like this, but this time is different. So the first thing I tried when I got the phone was to do a reset and cache wipe from recovery. I rebooted the phone and it showed a screen that said "Android is starting, optimizing app 9 out of 31." when it got to 21 the phone rebooted and went back to 9. It did this several times before I attempted to wipe/reset again. I then downloaded the tar file G920VVRU4CPH1 and flashed it in Odin. I did a manual reset before the phone booted, and it is doing the same thing again. reboots to a green screen where it tries to optimize apps, stays there for about 20 seconds, and reboots over and over again in the same cycle. I have tried all other stock marshmallow roms that i can find, Odin won't flash older ones, (assuming its not letting me downgrade). Also another weird thing, every time I flash, the blue update screen goes to 32%, stops, erases, and reboots. Phone is on 6.0.1 version MMB29K.G920VVRU4CPH1 as seen in recovery. Any help would be gladly appreciated. Thank you!
I am having a similar problem with loading new rom. The farthest it gets is 32%. Sometimes it doesn't get even that far.
I ended up just buying a trashed s6 and swapping the motherboards. Only way I could fix it
Hello All,
My friend has a Verizon S6 that is not booting up. Stays frozen or in a boot loop on Samsung logo.
No idea what Android version it had.
I downloaded the latest firmware md5 file for it from SamFirm and tried to flash it with Odin. It was a single file so I used the AP button as usual.
It starts flashing but when it comes to System.img Odin fails. I tried many times with many Odin Versions and re-downloaded the firmware file and tried many usb cables and 2 different PCs but no go.
As I'm writing this, I tried it again and it completed the flash successfully but the phone booted up in a blue Android screen and it said installing system update, then erasing and it froze right there. I go into recovery and reset to factory settings and wipe cache. And the purple LED is on all the time.
So now it's stuck in a boot loop on the Verizon logo red screen.
I believe something is messed up in the partitions or memory, I'm not sure. Anyway I can revive this phone for him?
He's not interested in rooting but if it's a must, no problem; anything to get the phone started.
The phone is sim unlocked cos he was using it on sim cards outside the US, so he would like to keep doing that as he no longer lives in the US.
Thank you kindly in advance.
Hi guys, I was updating my phone and when the update ended it just kept starting and restarting all the time.
When the samsung logo appears it just restarts again and again.
The phone is not rooted but the bootloader is unlocked.
I wanna flash the latest firmware with odin, do you think is it a good idea or should i try something else?
I think here you can find the solution: https://forum.xda-developers.com/galaxy-s10e/help/s10e-literally-stuck-bootloops-2020-t4032023/page2