Related
Hello,
my battery charger stopped working and i need a new one. I read a few review and i'm a bit confuesd, not every chargers with the capability to deliver 1000mAh works with every device. So which one oft them works with the desire s and delivers 1000mAh and not just 500mAh?
just buy a oem wall charger ,, easily found on ebay and also cheap
does it has any difference between 1000 and 500mah chargers? now i'm using original liveview charger with 500mah on it but also have 1A iPhone charger.
vartotojas123 said:
does it has any difference between 1000 and 500mah chargers? now i'm using original liveview charger with 500mah on it but also have 1A iPhone charger.
Click to expand...
Click to collapse
I also have a 1A charger (coming from a SGS3), but I haven't had any problem
MatthewJoe said:
I also have a 1A charger (coming from a SGS3), but I haven't had any problem
Click to expand...
Click to collapse
same here
Overheating
im using an old S2 charger i think, its got an output of 5V, 0.7 amps and after flashing a costom rom, jellyfirebean im getting serious overheating issues, but only while charging with the phone on.
however i cant confirm this is the chargers problem yet
just a note, its the phone that heats up not the charger
coolkid12239 said:
im using an old S2 charger i think, its got an output of 5V, 0.7 amps and after flashing a costom rom, jellyfirebean im getting serious overheating issues, but only while charging with the phone on.
however i cant confirm this is the chargers problem yet
just a note, its the phone that heats up not the charger
Click to expand...
Click to collapse
no the phone never heats up using original wall charger
Talha7866 said:
no the phone never heats up using original wall charger
Click to expand...
Click to collapse
Double that. Overheating can be only caused by the phone itself, or a defected battery (means it is near death, but for serius heating, you will notice like 1hrs of battery life for the phone).
On another note for the topic. I use 3 type of chargers for my phones:
At home my ASUS tab's one (which is rated 5V 1A at the standard USB, plus the extra for the dock, but it is ASUS specific), at work an old ZTE "dumbphone" charger (which is rated 5V 0.75A, and is a high frequency switching type, so really energy-efficient) and for any other my old SE X8's one, which is 5V 650mA (which is also switching type). Also dedicated charger cables, 1 nokia, 1 SE, 1 HTC and 1 ZTE at my car.
The phone's original 5V 1A is NRFB at the box of the phone, but I have a security backup Samsung charger (rated 5V 500mA and pass-trough type, so not really efficient, but stable) which works just fine. The S is not capable (or not enabled just yet) of fast charge mode AFAIK so no really chance for 500mA or more when charging (even when GPS and 3G on, and screen on max, which is aroung 430mA when I last measued it with a service cable).
reporting back
yeah i can confirm it was the 2 year old htc battery
i am now using 2 anker 1600mah batterys and they last a LOT longer + come with an enternal charger so i always have one charged, it also charges the old htc battery too externally so i can now use 3 battieries mwahahahaa
note i did have to delete battery stats in cwm to recalibrate
Just got my 1+6 and I love it. Just thought I'd share that the 1+ power adapter doesn't work with other usb C cables for fast charge. It'll charge at regular speed but not fast. I have an OTG cable from Amazon that will not work at all. Make sure to buy OEM accessories
halo312 said:
Just got my 1+6 and I love it. Just thought I'd share that the 1+ power adapter doesn't work with other usb C cables for fast charge. It'll charge at regular speed but not fast. I have an OTG cable from Amazon that will not work at all. Make sure to buy OEM accessories
Click to expand...
Click to collapse
Did you put OTG mode on via advanced settings? It will go off automatically after 10 min inactivity. And yes, Dash charging needs original dash charger AND dash cable (or whatever it's called, the red Oneplus cable).
I have cheap chinese OTG-adapter and it works just fine, after enabling OTG mode every time when using.
Eremitus said:
Did you put OTG mode on via advanced settings? It will go off automatically after 10 min inactivity. And yes, Dash charging needs original dash charger AND dash cable (or whatever it's called, the red Oneplus cable).
Click to expand...
Click to collapse
Thanks for the OTG tip. Works like a champ!
what is so special about oneplus cables, it doesn't work for me either.
x111 said:
what is so special about oneplus cables, it doesn't work for me either.
Click to expand...
Click to collapse
Those cables support an higher amperage current passing through and I also think they also have 1 or 2 more contacts in the type-c connector and larger ones in the type a usb
Lorenzo2010 said:
Those cables support an higher amperage current passing through and I also think they also have 1 or 2 more contacts in the type-c connector and larger ones in the type a usb
Click to expand...
Click to collapse
For my nexus6 I have fast charger which kicks up charging up to 9V - 1A.
This charger does not work with oneplus6 and charging only at 5V - 1A.
Also, nexus6 does not fast charging with oneplus charger and charging at 5V - 1A.
I am highly disappointed that we do not have standard for fast charging.
I use magnetic adapter and it's incredible convenient to use and I am not going to go back. And now I have to leave with retarded decision from Oneplus who cannot deliver normal fast charging from any chargers which able to deliver over 1A !!
Shame on you Oneplus !!
You need the cable provided with the phone to dash charge, because of the high current output while charging. Standard cables are rated to handle maximum 2amps, while OP uses 4amps.
Edit: VOOC and rapid charging cables have a special 5th pin used for verification
~Disregard below statement ~
Any cable will work as long as it is rated for 4A. The power brick has to be a dash or VOOC charger.
phillibl said:
Any cable will work as long as it is rated for 4A. The power brick has to be a dash or VOOC charger.
Click to expand...
Click to collapse
No it won't. How does the charger know the cable is rated at 4 amps?
There is stuff in both charger and cable and both must be present for dash charging to work
Sent from my ONEPLUS A6003 using Tapatalk
Alex240188 said:
No it won't. How does the charger know the cable is rated at 4 amps?
There is stuff in both charger and cable and both must be present for dash charging to work
Click to expand...
Click to collapse
I didn't realize there is a 5th pin used as verification. Ideally the power brick and/or phone can detect the resistance of the cable but that's not the case here. Luckily most 4A cables I've found are VOOC or rapid charging compatible.
If someone needs a longer cable:
you can actually use a 3.0 USB extension cable as long as it is rated for more power.
some guys at the op community tested a few cables and confirmed this one working:
https://www.amazon.com/gp/product/B017XUSKVK
i dont know if i can post links to the OP Community but i will do it either
https://forums.oneplus.com/threads/...-a-f-cable-supports-op3-dash-charging.454306/
x111 said:
For my nexus6 I have fast charger which kicks up charging up to 9V - 1A.
This charger does not work with oneplus6 and charging only at 5V - 1A.
Also, nexus6 does not fast charging with oneplus charger and charging at 5V - 1A.
I am highly disappointed that we do not have standard for fast charging.
I use magnetic adapter and it's incredible convenient to use and I am not going to go back. And now I have to leave with retarded decision from Oneplus who cannot deliver normal fast charging from any chargers which able to deliver over 1A !!
Shame on you Oneplus !!
Click to expand...
Click to collapse
Just upgraded the misses from a OP 1 to an OP 6.
Until now we had also been using magnetic usb cables that are soooooo convenient.
My Nexus6 and her OP 1 charge at 1amp with them according to Ampere and were android auto recognized by our cars...
With them the OP6 only charges at 320mA and is not android auto recognized by our cars...
I'm looking for a magnetic usb cable upgrade so OP 6 works as I expect it to... I don't care about quick charging (have never needed it as battery is never empty when i set the phone to charge at night). I care about magnetic uber convenience and android auto recognition in the car.
dwardo said:
Just upgraded the misses from a OP 1 to an OP 6.
Until now we had also been using magnetic usb cables that are soooooo convenient.
My Nexus6 and her OP 1 charge at 1amp with them according to Ampere and were android auto recognized by our cars...
With them the OP6 only charges at 320mA and is not android auto recognized by our cars...
I'm looking for a magnetic usb cable upgrade so OP 6 works as I expect it to... I don't care about quick charging (have never needed it as battery is never empty when i set the phone to charge at night). I care about magnetic uber convenience and android auto recognition in the car.
Click to expand...
Click to collapse
I'm using this one
wsken.my/WSKEN-X-Cable/WSKEN-Micro-USB-Lightning-2.4A-Mini2-Magnetic-X-Cable-Black
already 3rd generation.
I cannot understand why we do not have universal standard magnetic connector,
it's so much more convenient to use.
I hope they will come up with magnetic otg and retarded audio adapter since everyone removing audio jack for no reason at all.
I have the Samsung Note 4. Like the OP6, it has a proprietary "quick charge" mode, but I find it will also charge quite fast when provided with a non-Quick Charge source such as a battery that can source several amps of current.
How fast does the OP6 charge without the Dash charger and cable? (in terms of amps drawn from source?)
Like it would take years like why would you want to know this, if you broke your charger buy another and look after it like. It's one of the main features of the phone and they don't talk about how fast it charges like
At work i use a QC3.0 charger for my OP6. Didn't notice a great difference to the DASH charger at home. Maybe DASH is a few minutes faster.
40% to 70% charge with QC3.0 is still insanely fast.
Stay on topic guys. OP asked a question, which could be answered with facts, rather than opinions and scenarios. In my regular car charger, I go from 22 to about 70 in 40 minutes, if I can recall correctly.
ItsLaggyY said:
Like it would take years like why would you want to know this, if you broke your charger buy another and look after it like. It's one of the main features of the phone and they don't talk about how fast it charges like
Click to expand...
Click to collapse
I'm not sure if you're serious or sarcastic, but In case of the former, here are a few reasons why someone might be interested in charging with other than the Dash Charger:
1) AFAIK, Dash is available in AC mains or 12V Car charger versions. I often use a 20K mAH Anker powerbank battery for charging. That is usually in situations where other power is not available, but a quick charge is needed. Huge current is available, but would the OP6 use it?
2) I use a compact travel charger that has 5 USB charging ports. Using a Dash charger would require carrying another charger (big, bulky, without retractable prongs), and occupying one (or more due to the shape) additional AC outlets.
3) I have a phone charger in my bedroom, at my desk, in my travel bag (both AC and Car style), and in my car. A quick check on Amazon seems to indicate that the Oneplus6 charger is several times more expensive than other "quick charge" chargers. Over multiple charger locations, the extra costs add up.
Using the word "like" so many times makes it difficult to understand the post.
dwj said:
Using the word "like" so many times makes it difficult to understand the post.
Click to expand...
Click to collapse
I'm Irish, apology
I have a stockpile of fast chargers that used the weird Nexus standard (5V, 3A, non QC) and they're okay, and for overnight or at my desk at work that's plenty fast to get the job done. The phone shows them as "charging" and not "charging slowly."
I purchased a "Tinduqin oneplus5T charger" from Amazon that works and looks exactly the same as the original dash charger for about $20, but it seems to already be sold out.
If you don't use dash charger,you only can charge at 5v 1.5a,I have tested it with apple 45w pd charger,xiaomi qc3.0 and nexus 5v3a charger
timg11 said:
I have the Samsung Note 4. Like the OP6, it has a proprietary "quick charge" mode, but I find it will also charge quite fast when provided with a anon-Quick Charge source such as a battery that can source several amps of current.
How fast does the OP6 charge without the Dash charger and cable? (in terms of amps drawn from source?)
Click to expand...
Click to collapse
It won't charge very fast because it doesn't use any on board quick charge it's all in the dash charging brick
I have a bunch quick chargers 3.0 at home. It takes a life time. I end up buying the dash charger. I still use the quick charger for over night charging
there must be some sort of software restrictions on oneplus6 since measures show that oneplus6 cannot be charged with more than 5V-1.5A.
x111 said:
there must be some sort of software restrictions on oneplus6 since measures show that oneplus6 cannot be charged with more than 5V-1.5A.
Click to expand...
Click to collapse
Do you own the OP6? Do you have a USB power meter that could measure the charging current with and without the Dash charger and reply with the values?
On my Note 4, it charges at about 1.17A / 5 V when the screen is on, and the current goes up to 1.6A with the screen off. That is with either a QC2 Quick Charger or a battery power pack. The phone reports "quick charger connected" in both cases.
oneplus6 has 85% battery left, measured with usb voltmeter and original oneplus dash charger 5V-4A, it shows that oneplus6 is dawning 5V-1.3A and same thing is happening with other usb chargers capable to deliver over 5V-2A.
I guess oneplus6 should be discharged less than 50% or something in order to start receiving over 5V-3A
1N1ghth4wk said:
At work i use a QC3.0 charger for my OP6. Didn't notice a great difference to the DASH charger at home. Maybe DASH is a few minutes faster.
40% to 70% charge with QC3.0 is still insanely fast.
Click to expand...
Click to collapse
Is it possible to use a the original DASH-adapter but with another USB-C cable? I need a longer cable so I can use the phone whilwe charging.
OnePlus has a original cable for sale which is only 150cm Long.
My question is if I can buy any other manufacturers cable whish also support some sort of fast charging. I've heard for example that DASH-charging is the same charging model that Huawei P20 Pro uses, they just have different name. .
So, is there anyone here that has switched the OP original cable and charge it up with a cable from another manufacturer?
There has to be a solution to this. Me myself can't. be the only one that needs s longer cable.
x111 said:
oneplus6 has 85% battery left, measured with usb voltmeter and original oneplus dash charger 5V-4A, it shows that oneplus6 is dawning 5V-1.3A and same thing is happening with other usb chargers capable to deliver over 5V-2A.
I guess oneplus6 should be discharged less than 50% or something in order to start receiving over 5V-3A
Click to expand...
Click to collapse
That's normal. Phones pull the most amps when on low battery, then progressively less as they are charged.
Check how much it pulls on <40% and <80% respectively.
Well, I charged my Op6 with a no-name USB 3.0 charger yesterday (forgot my dash charger at home, I was by a friend) and from 3% to 100% it took about ~1 hour and 55 minutes.
Not that bad I guess. But I still prefer my dash charger
I'm using a huawei p20 pro charger atm. Phone states from 75 - 100 it will take 33 minutes. (prob a bit faster if I don't use the phone.
Here is a charging session with a Oneplus 2 charger without quick charge
Charging from 27% to 100% in 2 hrs, 40 min - avg. Charging speed: about 1000 mA/h
Hello,
I'm using this old thread since we're talking about the same thing.
Is there a kernel or rom for the OP6 that enables to draw as much current as possible form third party chargers? It's sad that it's stuck at 1.5A no matter the charger unless you use dash charger. 2A is already something, 3A would be awesome.
Of course only if this a software limit.
Does this model support power delivery like the Pro model? If so has anyone tested how many watts it pulls from a power delivery charger? Oneplus states the pro model supports 5V/3A power delivery which I believe is 15watts.
Pro 30W
Non Pro 20W
Linuxkek said:
Pro 30W
Non Pro 20W
Click to expand...
Click to collapse
These specs are for Oneplus's proprietary warp charging which is separate from the power delivery standard.
Without that it's unreal slow, maybe 1A
Linuxkek said:
Without that it's unreal slow, maybe 1A
Click to expand...
Click to collapse
you are uninformed. in addition to Warp, the 7p supports PD upto 3a with screen off. Android police confirmed this in their review.
OP is asking if 7 also supports this.
I have not measured charging speeds, etc. but I have a bunch of official Google PD bricks here for my 2XL and my OP7 charges just as fast, if not faster, than my Pixel. Just anecdotal but I was happy with charging performance.
I've charged my OnePlus 7 from 14% to 100% in about 1h and 15min. I call that really fast charging.
nIGhT-SoN said:
I've charged my OnePlus 7 from 14% to 100% in about 1h and 15min. I call that really fast charging.
Click to expand...
Click to collapse
With the charger that came with the phone or a different charger?
The included charger, it's the 20W one.
Linuxkek said:
Without that it's unreal slow, maybe 1A
Click to expand...
Click to collapse
nIGhT-SoN said:
The included charger, it's the 20W one.
Click to expand...
Click to collapse
Do you know what this thread is about?
Everyone knows Dash 20W is super fast. We're asking about USB PD.
heov said:
Do you know what this thread is about?
Everyone knows Dash 20W is super fast. We're asking about USB PD.
Click to expand...
Click to collapse
Like I sad, it will be 1A, maybe for the first 50% 1.5A, because with 3A a lot will not pay the extra bucks for Dash charger.
Pro: 5V/6A - 3A
Non-Pro: 5V/4A - 3A? No way... with luck maybe 2A
I will get my OP7 next week and I can test it but I'm sure you will get up to 1.5A
I've charged it with a power bank from Huawei, with fast charge and it charged pretty quick. I haven't look at the time it took, but next time I will.
Linuxkek said:
Like I sad, it will be 1A, maybe for the first 50% 1.5A, because with 3A a lot will not pay the extra bucks for Dash charger.
Pro: 5V/6A - 3A
Non-Pro: 5V/4A - 3A? No way... with luck maybe 2A
I will get my OP7 next week and I can test it but I'm sure you will get up to 1.5A
Click to expand...
Click to collapse
So you are saying:
OP7 Pro supports USB 3.1, USB PD protocol to 3A, and Warp-protocol to 6A
OP7 supports USB 3.1, Dash-protocol to 4A, but NOT USB-PD?
Please do test it- to confirm, you must have 1. screen off 2. a USB power meter that can measure the draw (or an app that can record the draw while the screen is off- viewing current while in app will not work since it only works with screen off.
There seems to be a lot of people who don't understand what USB-PD is. Of course, if you use a normal USB charger that is neither Dash/Warp nor USB PD, it will not draw more than 1.5A.
nIGhT-SoN said:
I've charged it with a power bank from Huawei, with fast charge and it charged pretty quick. I haven't look at the time it took, but next time I will.
Click to expand...
Click to collapse
You can use a app, which will tell you how fast it charge.
heov said:
There seems to be a lot of people who don't understand what USB-PD is. Of course, if you use a normal USB charger that is neither Dash/Warp nor USB PD, it will not draw more than 1.5A.
Click to expand...
Click to collapse
Dude, USB-PD means USB Power Delivery. How somebody can not understand what this mean?
Oppo slow it down to sell VOOC/Dash charger (and cable) in the kernel, like on the OnePlus devices before.
When the OP7 support 3A, with 5V, you will get 15W, which is almost QC 3.0, so you can get 5 charger and any cable you want for the same price as a Dash charger. There is no way!
So I've tried today charging with my power bank, a HUAWEI 10000mAh QuickCharge power bank, from 1% to 100% and it took about 2h and 30min. From 15% I think it would take about 2h to charge. Power bank fast charging is rated at 9V 2A 18W. With Ampere it was showing to chager at about 1.3-1.4A. I would say it's pretty ok, it's not as fast as with the original charger, but it's ok.
nIGhT-SoN said:
So I've tried today charging with my power bank, a HUAWEI 10000mAh QuickCharge power bank, from 1% to 100% and it took about 2h and 30min. From 15% I think it would take about 2h to charge. Power bank fast charging is rated at 9V 2A 18W. With Ampere it was showing to chager at about 1.3-1.4A. I would say it's pretty ok, it's not as fast as with the original charger, but it's ok.
Click to expand...
Click to collapse
That is not a USB-PD bank. It'll charge at 1.5A tops with that. Our phones can't do QuickCharge.
Do the same test if you can, but use a USB-PD charger and screen off.
This thread is about getting a confirmation that it can regulate with USB-PD upto 3A when the screen is off. Our phones will not support QuickCharge or any other proprietary protocol.
We know It does Dash/Warp, regular USB upto 1.5A, and now we want to know if it does USB PD.
---------- Post added at 09:16 AM ---------- Previous post was at 09:04 AM ----------
So I caved and finally tested it myself.
Yes, the regular OnePlus 7 does support USB-PD 5v upto 3A with the screen off. With the screen on, I could get 1.94A
I used an Essential PH-1 included charger, which is a USB-PD charger that can do 5V and 9V upto 3A. I went from 60% to 70% in 8 minutes, and used the logkit to capture the current. While on, I was getting a consistent 1.94A, which is higher than a regular USB charger which usually peaks around 1.4-1.5A. With the screen off, I kept the logkit going, and you can see the average is well above 2A (again, this is average- I had the screen on for a while before an after, which is why the average isn't 3A). It's also worth noting this was only from 60-70%.
So yes, like the OP7 Pro, the OP7 also supports USB-PD up to 3A with the screen off, and upto 2A with the screen on, much faster than a regular USB Charge, and ALMOST on-par with Dash Charging with screen off.
So hopefully this puts this thread to rest, and you can feel confident buying a USB-PD brick, and those that doubted it have learned that OnePlus didn't skimp on the USB controller on the regular OP7.
From the graph, you can see the flat line at -3 when the screen was off, and how it bounces "up" to -1.7 when it's on.
Can confirm, used my USB PD charger while away last week. Charge from 5ish% to full was around 2 hours. Much quicker than the old standard Microsoft USB C charger I use at home.
Charge time with PD was similar to that with my old mate 20 pro which showed 'fast charging' to indicate PD being used.
So I have only a titacute 30w or 5v at 6a charger. I never received the original. I then purchased the orange titacute cable. In the end it can only get 4400 mah only totally dead 1% charge with ampere and other software..
What could be causing this the charger the cable or what I really wanted to get 30w charging. Thanks everyone.
Cheap *** Warp Charger clone, don't expect to much. Warp Charge is an active circuitry-controlled charger and isn't that simple to clone.
And if it's try you charger is a clone of a clone I wouldn't expect anything to charge active, what you get is normal 5v charging.
Skickat från min SM-T819 via Tapatalk
pitrus- said:
Cheap *** Warp Charger clone, don't expect to much. Warp Charge is an active circuitry-controlled charger and isn't that simple to clone.
And if it's try you charger is a clone of a clone I wouldn't expect anything to charge active, what you get is normal 5v charging.
Skickat från min SM-T819 via Tapatalk
Click to expand...
Click to collapse
Right but OEM one plus charger only does 5v 6a for 30w. And titacute says it does that. But it's more like 5v 4.2. Can someone with the OEM and titacute 6a cable show an ampere or other app screenshot of 5800 mAh at 5v. So I know that it's the charger and just seek OEM or whatever works.. thanks
I use chargers & cables purchased from China, not from OnePlus and they work great. Since OnePlus 3. All my OnePlus phones i purchased from other people with no accesories.
Fast charge best time, 45 minutes from 0% to 100% with the phone off. (with OP 3 and op5) . Now i can't try on OP 7 pro because of Magisk.
null0seven said:
I use chargers & cables purchased from China, not from OnePlus and they work great. Since OnePlus 3. All my OnePlus phones i purchased from other people with no accesories.
Fast charge best time, 45 minutes from 0% to 100% with the phone off. (with OP 3 and op5) . Now i can't try on OP 7 pro because of Magisk.
Click to expand...
Click to collapse
Why not because of Magisk... I have Magisk is that why it won'y work ... I get WARP charge banner but it's a 4A charge and I have the 6A titacute charger and short orange cable (quite thick indeed) ... what gives ? Any advice for me ?
Let me clear this up.
Magisk it's the issue if you charge with the phone OFF.
It charges the phone but the screen do not show you how much (%) and when it's full, 100%.
null0seven said:
Let me clear this up.
Magisk it's the issue if you charge with the phone OFF.
It charges the phone but the screen do not show you how much (%) and when it's full, 100%.
Click to expand...
Click to collapse
Sorry friend but it didn't exactly clear this up. How can be sure it is charging at 6A when it's off. Also how come it says warp charge but ampure .APK shows 4100 mah which is like 4 amp.. I have seen people with 5800 mAh screenshots.. is this cause of magisk? Can we figure out why?
No. I don't think so.
Magisk it's one of the problems if you charge with the phone OFF. NOT the case for you.
Also if you got Fast charge it's ok.
null0seven said:
No. I don't think so.
Magisk it's one of the problems if you charge with the phone OFF. NOT the case for you.
Also if you got Fast charge it's ok.
Click to expand...
Click to collapse
Right I am aware that it is ok. But I want to know if I can buy the original charger and have it charge at max speed.. it's one of the reasons I wanted this phone. Because I hata waiting for a charge and this phone is supposed to warp charge really really fast..
This is good for many reasons but main reason why is :
I am on the road and the quicker I can charge at a stop the quicker I can get back to making money..
And also
It is better to be NOT be using the phone while a cable is attached for many reasons. Therefore the faster it charges the less time it's plugged in. The less time it is plugged in the better. For the jack , cable and experience in general
Yes, buy warp charger if you like the price 30 euro + transport (about 13-14 euro) . On OnePlus.net
Or you can buy from chinese stores, other than OnePlus, Much Cheaper. I both warp charger+warp cable with 10,30 $ US.
You can buy warp charger for car.