Related
I have tried quite a few ROMs, and all ended up going back to stock firmware because they wouldn't boot. I know I have to format data, and some ROMs ask you to change the data partition as f2fs.
Still, I think that there may be no ROMs that currently work for the US variant. One guy said LOS 13 worked, but when I flashed it, it failed. If someone has gotten it to work, can you please post as many steps as you remember on how to get it work?
Debrand to BLN-L21 following this guide and you're ready to flash cooked ROMs https://forum.xda-developers.com/honor-6x/how-to/guide-successful-debranding-to-bln-t3701050
RedSkull23 said:
Debrand to BLN-L21 following this guide and you're ready to flash cooked ROMs https://forum.xda-developers.com/honor-6x/how-to/guide-successful-debranding-to-bln-t3701050
Click to expand...
Click to collapse
Thanks, but wouldn't there be more issues down the line with a debranded phone? What if I soft-bricked my phone, it seems like it'd be really hard to restore? Has anyone actually ever done this on a BLN-L24?
Hello all,
I too am having issues with flashing roms to this device, US variant (BLN-L24). In my particular case, the rom boots up (EliteRom v7.1) and will actually function. However, wifi does not work, as well as I have no sound whatsoever. Youtube also will not play, nor will any videos, which I'm guessing is tied to whatever issue is with the sound. I have flashed multiple times per the step by step instructions, as well as following the Youtube video, all with the same result over the last few days. At this point, my phone is effectively useless to me, though cellular data does still work, just no calls can be answered. Anyone have any suggestions I might be able to follow? Also, even my TWRP backup that I made before installing the rom will not restore at this point. Any help is appreciated, thanks.
Jessooca said:
You must be missing a step or something, because [Elite ROM][EMUI 5.1] Elite ROM v7.1 for Honor 6X by HassanMirza01 works on the L24 us variant without issues, I have none.
Perhaps go back to stock and start over. I haven't had any issues with his rom and I didn't do anything more than what's needed to root/install twrp and flash the rom per his instructions.
Click to expand...
Click to collapse
I just followed the instructions; I believe to the best I could, and I'm stuck in a bootloop now. Which version of EMUI were you on before flashing? I was on EMUI 5.0 which may be my issue.
I started from EMUI 5.0
Unlocked my bootloader
Let it factory reset
Installed the Elite TWRP on the page
Booted to Elite TWRP
Formatted all partitions excpet for external sd card
Reformatted Data to f2fs
Re-wiped data
Checked that it was f2fs
Installed Elite ROM zip
Installed open gapps 7.0 ARM64
Installed the patch
Rebooted
Bootloop
i4ybrid said:
I just followed the instructions; I believe to the best I could, and I'm stuck in a bootloop now. Which version of EMUI were you on before flashing? I was on EMUI 5.0 which may be my issue.
I started from EMUI 5.0
Unlocked my bootloader
Let it factory reset
Installed the Elite TWRP on the page
Booted to Elite TWRP
Formatted all partitions excpet for external sd card
Reformatted Data to f2fs
Re-wiped data
Checked that it was f2fs
Installed Elite ROM zip
Installed open gapps 7.0 ARM64
Installed the patch
Rebooted
Bootloop
Click to expand...
Click to collapse
On one of the attempts that I did for installing, I installed the patch and it put me in a boot loop. Maybe not installing the patch can help you?
I cant get anything to work for the US version. Sure stuff boots but some of it is just broken. On octOS i am unable to use root unless i switch supersu to automatically grant root to apps. I cant get root access by using prompt because nothing pops up. On crdroid i have the same exact issue. Id rather have the prompt than allow any app root access without my knowledge. With ELITE ROM my first boot brings up a home screen with no keyboard. It completely skips any kind of setup screen. I can get the setup screen by flashing a keyboard from an aroma gapps installer but then i lose google services. The US version also seems to be forgotten as for most roms you wont see it anywhere under supported lists.
I've never been able to get a custom rom to work on my BLN-L24. Everything just ends in a never-ending bootloop of frustration.
Though, I have only ever tried with EMUI 5.0+. Maybe an earlier version of EMUI gets better results...?
code_name_duchess said:
I've never been able to get a custom rom to work on my BLN-L24. Everything just ends in a never-ending bootloop of frustration.
Though, I have only ever tried with EMUI 5.0+. Maybe an earlier version of EMUI gets better results...?
Click to expand...
Click to collapse
It really sucks that nothing seems to work. Ive tried flashing using multiple recoveries and ive tried all kinds of flashing to fix issues with the ROMS. Nothing helps. If anyone has successfully gotten a ROM fully working on BLN-L24 they need to tell people exactly what they did step by step.
It seems that for the roms located here, they seem to all assume that the phone has been debranded to bln-l21 variant. I don't know if it has any bearing on the current issues we're all experiencing, but I did notice that all twrps available for this device on the forums state they are the "Open Kirin Edition". It's been a while since I've rooted or rom'd a phone besides this one, but I've never encountered a twrp with a custom name like that.
I know that the developer of the EliteRom had his custom twrp, but is there a different twrp besides that one that does not state it is an "Open Kirin Edition"? Like I said, not sure if it has any bearing on things here, but I've been very confused about that.
TurtlePwr82 said:
It seems that for the roms located here, they seem to all assume that the phone has been debranded to bln-l21 variant. I don't know if it has any bearing on the current issues we're all experiencing, but I did notice that all twrps available for this device on the forums state they are the "Open Kirin Edition". It's been a while since I've rooted or rom'd a phone besides this one, but I've never encountered a twrp with a custom name like that.
I know that the developer of the EliteRom had his custom twrp, but is there a different twrp besides that one that does not state it is an "Open Kirin Edition"? Like I said, not sure if it has any bearing on things here, but I've been very confused about that.
Click to expand...
Click to collapse
For most phone i've ever owned you never had to change the recovery for each ROM. Its confusing. Most recoverys say Open Kirin Edition when booting. What confuses me is why we need to debrand to get the ROMS to work. If the phone pretty much run on the same hardware then why is L24 having so many issues? Why are the devs not testing on these devices?
BakedOnSomeSour said:
For most phone i've ever owned you never had to change the recovery for each ROM. Its confusing
Click to expand...
Click to collapse
Right, that's what I was thinking. For any phone I've ever rom'd, there was always just one twrp that everyone worked from.
Edit: found this while looking through the roll back to stock forum. I don't know if it will help anyone else, but figured I'd put it here as well if it might. All credit for this goes to the original poster johnnyrichter:
johnnyrichter said:
Tried this method after being on LineageOS for a week or two and having poor LTE signal, no MMS, and voicemail issues so I'm trying to go back to stock so I can have a fully functional phone since I rely on it heavily for work. Followed all steps using BLN-L24 B360 firmware. On step 10 I rebooted to update and it went right to "5% Installing Update" and stuck there for 5 mins, then rebooted itself, has been sitting at "honor" boot screen for 14 minutes so I made it reboot to EMUI recovery, wiped/factory reset, rebooted, loaded EMUI afte 2 more minutes. Appears to have worked and hopefully my issues are fixed!
Edit: Signal, mms, and voicemail issues fixed.
Click to expand...
Click to collapse
Hopefully will benefit someone here as well.
When debranding the BLN-L24, and branding it to BLN-L21, are there any issues with the ROMs once they're installed? I imagine the radios, and such are different for the two models??
BakedOnSomeSour said:
Why are the devs not testing on these devices?
Click to expand...
Click to collapse
Devs can only test devices they have in possession. If they don't have your phone model, how are they going to test it?
galapagos said:
Devs can only test devices they have in possession. If they don't have your phone model, how are they going to test it?
Click to expand...
Click to collapse
well, many don't want to give them a phone because most developers here tend to stop work on a ROM and leave people hanging.
I have gotten several ROMs working on L24 variant...
Yes it seems to me any Elite kernel based ROM works or should work on the L24. But /data must be ext4 format. Then even that the ROM works, the fingerprint scanner never allows a complete successful scan. I think because it must be f2fs format for that encryption to work or something. This is the link to those ROMS https://hassanmirza01.blogspot.com/p/custom-roms.html?m=1
On the other hand the LOS based ROMs never work or at least they reboot and the screen is always black or the ROM branding just stays there flashing. This sucks cause I want to run the newest Resurrection ROM but I ask the developer about why I have that problem or how long that ROM takes to boot and I never get an answer. He also just put a new beta AOKP ROM up and it does the same black screen thing too.
I am also suspicious it has to do with the version of TWRP. I think some are capable of formatting f2fs correctly or the encryption or whatever. Point is some of the devs need to be a little more consistent answering questions at a minimum. I know it takes time to fix bugs but give us a little heads up.
I got problem by my Xiaomi Redmi Note 6 Pro (4/64GB). Problem with wifi and TWRP.
I saw on other pages, that On Android Pie, there can be problem with TWRP, but I am unsure if this is the same... Cause I am experiencing two problems, both of them are seriou from my point of view and using this phone.
Wifi doesn't want to start. Actually it was working for some time, about 1 or 2 hours. But after all updates has been done and it doesn't want to start. (it disconnect me automatically). When I want to turn it on it is impossible. I tried to install different version of MIUI, but it didn't help. Before I had installed MIUI Polska 10 and now I got Xiaomi.eu official ROM. Still the same problem. Now I have installed version MIUI global 10.3.3 stable version (PEKMIXM)
Besides I am unable to to anything in TWRP. It was working during instalation, but now I cannot SWIPE I tried different version of it, but none of it works
Don't know, how to solve this problem.
I got installed TWRP in version of TWRP 3.2.3.0, but I have installed almost of version, which I found at different pages, and at all there was the same problem... At bottom TWRP screen I got below some kind of hashes of something. I can see whole screen, but at the bottom I got 1,5cm stripe with different lines.
I don't know, if those 2 problems are connected somehow, but as I wrote above, I tried different versions of TWRP and MIUI and I am still experiencing the smae problems...
Any advice? Or maybe do you want some more output from my phone?
StatiXOS
Download StatiXOS for free. StatiXOS is a homebrew distribution of Android. StatiXOS is a custom ROM based on the Android Open Source Project aiming to be minimal and clean, while providing quality of life improvements and up to date security patches. This page is to provide downloads for...
sourceforge.net
4.2 has been release
"Introduce our OTA Updater!"
For those with the Chrome issue of freezing I have a fix that another user in another ROM thread accidentally found!
If you download
PH1-OTA-PQ1A.190105.090.zip
and then reboot into recovery (TWRP, be sure to disable pin on phone before hand and backup everything) then flash the above (I wiped everything first but DON'T wipe internal storage) then I did a second wipe of everything but internal storage and then I flashed 4.2 of StatiXOS and then I flashed TWRP, then I rebooted phone and set it up from new and restored everything from Cloud backup and I can confirm that I no longer have the Chrome freezing issue.
You can thank seungbaekm over in the Evolution-X 5.4 thread for this fix as he is the one that accidentally flashed the older PH-1 factory image and discovered Chrome then worked again! This should fix the issue for all the new Android 11 ROM 's out there for us folks that have the Chrome browser locking issues.
I did not even test the new 4.2 ROM on its own to see if it happens to fix the Chrome issue but I doubt that it does since it is not mentioned in the release notes. Also I have no idea if any of the other original factory images will also fix the issue, I only downloaded the one they he said he accidentally flashed and used it.
Hope this helps everyone with this issue as I know how frustrating it has been. Sure, there is the Bromite/Brave/Firefox work around, and I have been using and enjoying Bromite since 4.1 but I like having things working the way they are supposed to work.
Thanks you very much
I will test
Following this great insight about the fix of the Chromium issue, I only flashed mata PQ1A.190105.090 NOVENDOR firmware from this old thread, without wiping anything of my current StatiXOS 4.2 installation, and after booting Brave is working perfectly.
So, it seems the issue was caused not by the ROM system or vendor, but the mata QQ1A.200105.007 firmware.
As a consequence of flashing this old no system nor vendor firmware, my device baseband was downgraded, but mobile data seems to be working just fine. I guess it's possible to test newer firmware available at the referenced thread, like PQ1A.190105.112, QP1A.190711.107 or QP1A.190711.148, to identify the latest firmware free of the Chromium issue.
More good news: now Netflix is working fine, also.
UPDATE: I tried all the these firmwares and Netflix worked fine only with the Pie ones. So, PQ1A.190105.112 is the more recent mata firmware that I can use on my PH-1 with StatiXOS 4.2 in order to keep Chromium browsers and Netflix working.
aamadorj said:
Following this great insight about the fix of the Chromium issue, I only flashed mata PQ1A.190105.090 NOVENDOR firmware from this old thread, without wiping anything of my current StatiXOS 4.2 installation, and after booting Brave is working perfectly.
So, it seems the issue was caused not by the ROM system or vendor, but the mata QQ1A.200105.007 firmware.
As a consequence of flashing this old no system nor vendor firmware, my device baseband was downgraded, but mobile data seems to be working just fine. I guess it's possible to test newer firmware available at the referenced thread, like PQ1A.190105.112, QP1A.190711.107 or QP1A.190711.148, to identify the latest firmware free of the Chromium issue.
More good news: now Netflix is working fine, also.
UPDATE: I tried all the these firmwares and Netflix worked fine only with the Pie ones. So, PQ1A.190105.112 is the more recent mata firmware that I can use on my PH-1 with StatiXOS 4.2 in order to keep Chromium browsers and Netflix working.
Click to expand...
Click to collapse
This is some great news, thank you and SirDigitalKnight for the research! I haven't tried this fix yet, but I'm planning to when I flash this week if I do run into the chrome freeze problem. You mentioned this downgrades the device baseband version. I'm not too familiar with that, you did say it's working fine so far, but do you think that could cause issues in the future?
Just a question, does StatiXOS have slim recents included?
Mous3kteer said:
This is some great news, thank you and SirDigitalKnight for the research! I haven't tried this fix yet, but I'm planning to when I flash this week if I do run into the chrome freeze problem. You mentioned this downgrades the device baseband version. I'm not too familiar with that, you did say it's working fine so far, but do you think that could cause issues in the future?
Click to expand...
Click to collapse
I have no idea if using a.Pie firmware could have side effects in the future. So far, I haven't seen any.
Using the StatiXOS Telegram support group, I shared the information about the different firmwares to the devs, so I think they'll tell us if something can go wrong in the future.
Is anyone else having issues with sending a text message with this rom?
vineetbhatia said:
Is anyone else having issues with sending a text message with this rom?
Click to expand...
Click to collapse
If you have VoLTE on, turn it off
vineetbhatia said:
Is anyone else having issues with sending a text message with this rom?
Click to expand...
Click to collapse
If you have VoLTE on, turn it off
Double Post
Just reporting that I did a clean install - "Fastboot -w" on the latest working firmware (JAN20 FW, FEB20 Vendor iirc) and I'm very impressed.
Plus replaced the screen, battery, and buttons cable and now the phone is "essentially" new. Parts are actually quite cheap.
Chrome is working without issues.
360 Camera is working without issues
Haven't tried sending SMS with VoLTE On yet.
Amazing that we still a maintainer.
chanh2018 said:
If you have VoLTE on, turn it off
Click to expand...
Click to collapse
Yup, that worked. Thanks mate..
The March 10th update they pushed out through the OTA updater worked perfectly. It is nice to see we still have good support on this great phone.
SirDigitalKnight said:
For those with the Chrome issue of freezing I have a fix that another user in another ROM thread accidentally found!
Click to expand...
Click to collapse
Thank you for this! And also thanks to @aamadorj for the further investigation!
It's too much of a hassle for me to do this fix right now, and I admit I have adapted to using Bromite and Firefox, but I'll definitely keep this in mind for some other time when I feel more like it... BTW, I did check, and Chrome stil freezes on the latest 4.2 update, no surprise here.
This ROM has been working great for me, very stable, no issues, and the updates are a breeze, especially with the latest OTA updater.
kt-Froggy said:
Thank you for this! And also thanks to @aamadorj for the further investigation!
It's too much of a hassle for me to do this fix right now, and I admit I have adapted to using Bromite and Firefox, but I'll definitely keep this in mind for some other time when I feel more like it... BTW, I did check, and Chrome stil freezes on the latest 4.2 update, no surprise here.
This ROM has been working great for me, very stable, no issues, and the updates are a breeze, especially with the latest OTA updater.
Click to expand...
Click to collapse
You should be able to flash the older Pie firmware without wiping from what I have read but I have not tried that yet. I might try it with the very latest firmware of Pie, PQ1A.190105.112 and see if it screws anything up without wiping the phone. Anyway I always to a backup of the phone to the cloud and also of Whatsapp before I start messing around just in case I have to wipe and so far all my restores have worked perfectly, but yes it is a pain to have to setup wifi's and add back in BT devices and setup security and any double authentication apps you use. Getting used to it now though.
SirDigitalKnight said:
You should be able to flash the older Pie firmware without wiping from what I have read but I have not tried that yet. I might try it with the very latest firmware of Pie, PQ1A.190105.112 and see if it screws anything up without wiping the phone. Anyway I always to a backup of the phone to the cloud and also of Whatsapp before I start messing around just in case I have to wipe and so far all my restores have worked perfectly, but yes it is a pain to have to setup wifi's and add back in BT devices and setup security and any double authentication apps you use. Getting used to it now though.
Click to expand...
Click to collapse
Flashing the contents of the attached files using fastboot should make your device to use last firmware for Android Pie, without losing your current ROM installation.
aamadorj said:
Flashing the contents of the attached files using fastboot should make your device to use last firmware for Android Pie, without losing your current ROM installation.
Click to expand...
Click to collapse
OK, here is my update... Noting your comment in the other post about the downgraded baseband, I decided to exclude the modem from flashing. Flashed everything else from PQ1A.190105.112-NOVENDOR via fastboot, rebooted, and... Chrome froze again. Ugh... :\ OK. I went back to fastboot and flashed the modem - this time after the reboot the problem was fixed.
So, I'd say it's safe to conclude that the modem (baseband) is the actual component that was screwing up the Chromium-based browsers. Go figure...
This ROM is great on the PH-1. At the moment I can't get the LED to blink when notifications arrive. The setting is toggled on.
I've installed magisk, nanodroid and microg (not tried that sort of thing before!). Could that have anything to do with it?
chrisrg said:
This ROM is great on the PH-1. At the moment I can't get the LED to blink when notifications arrive. The setting is toggled on.
I've installed magisk, nanodroid and microg (not tried that sort of thing before!). Could that have anything to do with it?
Click to expand...
Click to collapse
Even with stock rom LED is not blink if you're using stock messages, try Textra and see if it works for you.
I've had a strange issue with my LG V20 ever since I got in last year and installed LineageOS 18.1 after rooting my H990 on LG firmware 10d (H990ds10d_00_OPEN_AU_DS_OP_1216.kdz) with DirtySanta and installing TWRP. Whenever I left the range of my Wi-Fi network, I would cause the System UI to become unresponsive while doing certain tasks - Unlocking, going to Settings -> Wi-Fi, expanding the Wi-Fi quick toggle in notifications, and probably a few more things.
This doesn't happen on the aforementioned stock firmware, nor on 10g AU 0117 stock firmware either.
For a while, I dealt with it by simply not using Wi-Fi. This sucked because I couldn't access computers over LAN, mobile data was slower, and it also had a data cap that I had to be wary of.
However, I decided I wanted to fix it.
I saw some recommendations involving installing every Lineage version since 14.1 sequentially until the latest. This didn't make sense to me, as clean flashing shouldn't leave any remnants behind, but dirty flashing that many versions went against everything I'd ever heard of regarding custom ROMs.
I also heard that it could be a modem firmware issue. Since I started on the last version of the stock OS for my region vulnerable to DirtySanta I thought surely not.
I later found out about KDZWriter, and used that to install the latest Nougat version of the stock rom available (also mentioned above). After installing that, I tried installing the latest LOS on top, which constantly informed me that com.android.media had stopped, I still had the LG sounds and wallpapers, and I didn't go through the initial setup - A sign of a dirty flash. I was still crashing in the same way too.
I formatted my data partition in TWRP (the "type yes to confirm" way), and tried again. Same crashes.
I've been awake for a little too long trying to fix this, but :
What I believe ended up working was backing up my /efs and /firmware partitions in TWRP while on rooted 10g firmware, dirty flashing LOS on top, formatting data as before, then flashing my /firmware backup in TWRP.
I'm hoping for this thread to document this issue as well as the fixes that worked for people. I saw tidbits of information spread out everywhere, so I'd like a central repository for it.
I hope this caffeine-induced writeup will help someone else with the same or similar issues.
If I have any more experiences with it, I'll do my best to write them down. Please share your experiences too!
Hello,
I own a motorola one vision and would like to flash LineageOS 20 on the device. I am creating this thread to know the experiences of people who did something similar. I would like to know if there is any issues with a custom ROM on this device [calling issues, or similar]. I would also like to know if there is a way to revert back to the stock ROM in case I screw up something. I have read several threads about this device but I would like to confirm it again and be provided with some pointers of what I could expect with a custom ROM on this device and how I could revert back to the stock ROM in case I screw something up.
Thanks in advance
nsg650 said:
Hello,
I own a motorola one vision and would like to flash LineageOS 20 on the device. I am creating this thread to know the experiences of people who did something similar. I would like to know if there is any issues with a custom ROM on this device [calling issues, or similar]. I would also like to know if there is a way to revert back to the stock ROM in case I screw up something. I have read several threads about this device but I would like to confirm it again and be provided with some pointers of what I could expect with a custom ROM on this device and how I could revert back to the stock ROM in case I screw something up.
Thanks in advance
Click to expand...
Click to collapse
I have been using lineageos since last year. I have used lineageos19 and am currently using lineageos20. The user experience is quite good. Everything works fine including calling except the hotspot. Hotspot does work but you have to keep tapping on the toggle to enable the hotspot or you can just restart the phone that's the temporary fix for the hotspot issue. The developer might fix the issue in the future updates. Other than that I didn't find any issue with the ROM and also it doesn't pass the safety net so you have to root your phone and install magisk to bypass safety net so that you can use your banking apps.
There are two versions official and unofficial. Official gets update every week and unofficial one is with the pixel features and google apps. It gets monthly updates.
If anything goes wrong you can install the official software called lenovo rescue and smart assistant on your pc and connect your phone with usb to pc. It can recover your phone to the original android 11 stock ROM.
Ryukrryts said:
I have been using lineageos since last year. I have used lineageos19 and am currently using lineageos20. The user experience is quite good. Everything works fine including calling except the hotspot. Hotspot does work but you have to keep tapping on the toggle to enable the hotspot or you can just restart the phone that's the temporary fix for the hotspot issue. The developer might fix the issue in the future updates. Other than that I didn't find any issue with the ROM and also it doesn't pass the safety net so you have to root your phone and install magisk to bypass safety net so that you can use your banking apps.
There are two versions official and unofficial. Official gets update every week and unofficial one is with the pixel features and google apps. It gets monthly updates.
If anything goes wrong you can install the official software called lenovo rescue and smart assistant on your pc and connect your phone with usb to pc. It can recover your phone to the original android 11 stock ROM.
Click to expand...
Click to collapse
Hey! Sorry for checking after this long. I don't plan on using any banking apps so it will be fine for me. I already got my unlock code and just have to unlock the device and flash LineageOS. I will do that after backing it up. Thank you for your sharing your experience !!!