Database Info

Viper4Android not woking

hello guys
im using a xperia z5 e6653 on MM 6.0.1 32.2.A.0.253 with open BL, stock firmware and kernel
i am trying to install viper audio mod without success. after flashing the last zip and installing the driver (busybox installed, of course) the driver status tells, that the driver is installed, working, using neon BUT the proccessing is disabled. none of the sound modifications are working.
can anyone tell me why?
thanks

anyone? am i the only one trying to install this mod on my device?

Caffeineshock said:
anyone? am i the only one trying to install this mod on my device?
Click to expand...
Click to collapse
Try to disable sony soundenhancement or use viper4android compability mode.

Install SELinux and set it to permissive. A little bit of struggling with it and it will work.

Already tried the permissive mode also used a zip that disables any other mod (it should)
Gesendet von meinem E6653 mit Tapatalk

Well that's weird because it has always been working this way for me. Even right now. Just don't use the latest version of V4A since it doesn't work very well on our phones.

how exactly did you do it?

Install Viper + Drivers. Set kernel to permissive using SE Linux, that's all. I use Viper v2.3.4.0 (FX), Codename "Beautiful". This is the version that's working on our phones with Marshmallow.

Any one got this working in Nougat ? Please share which version its working as I tried a lot and was able to install but I get no sound when its processing.
Thanks

GryTEcHoG said:
Any one got this working in Nougat ? Please share which version its working as I tried a lot and was able to install but I get no sound when its processing.
Thanks
Click to expand...
Click to collapse
install ARISE sound system deuteryum 2.4 ( or something like that) and choose plus mods aroma installer and flash it in twrp and you are good to go

L33Tgod said:
install ARISE sound system deuteryum 2.4 ( or something like that) and choose plus mods aroma installer and flash it in twrp and you are good to go
Click to expand...
Click to collapse
Thanks for the reply. Did you test it ? What is your device ? I have tried Arise mod before, just like others it gets installed and processing the sound but it gives no sound.

GryTEcHoG said:
Thanks for the reply. Did you test it ? What is your device ? I have tried Arise mod before, just like others it gets installed and processing the sound but it gives no sound.
Click to expand...
Click to collapse
I have Xperia Z5 E6653, stock nougat 32.3.A.0.376 with stock patched kernel, and tried normal ARISE project before and it didn't work, but now i tried this : https://www.androidfilehost.com/?fid=745425885120703424
and it is working very very good, sound is much much louder, so try it, but first backup your build.prop, if you want to go back to stock.
PM me the results.

L33Tgod said:
I have Xperia Z5 E6653, stock nougat 32.3.A.0.376 with stock patched kernel, and tried normal ARISE project before and it didn't work, but now i tried this : https://www.androidfilehost.com/?fid=745425885120703424
and it is working very very good, sound is much much louder, so try it, but first backup your build.prop, if you want to go back to stock.
PM me the results.
Click to expand...
Click to collapse
I Will try and let you know asp. What was your status with other versions when you installed it ? Just like mine with no sound when its processing ? For me all the versions are installed successfully and driver status shows its processing, but i have no sound at all.
Thanks
EDIT: Did you install all the add ons ? Can you get this working only viper and no add ons ?

GryTEcHoG said:
I Will try and let you know asp. What was your status with other versions when you installed it ? Just like mine with no sound when its processing ? For me all the versions are installed successfully and driver status shows its processing, but i have no sound at all.
Thanks
EDIT: Did you install all the add ons ? Can you get this working only viper and no add ons ?
Click to expand...
Click to collapse
i strongly suggest to install dolby atmos,because it will give you strong volume boost, i installed all the addons, you should too, it is easy to disable it in settings

L33Tgod said:
i strongly suggest to install dolby atmos,because it will give you strong volume boost, i installed all the addons, you should too, it is easy to disable it in settings
Click to expand...
Click to collapse
L33Tgod, Did you have selinux in permissive mode before flashing ARISE+Deuteronomy+2.4+Add-ons+AROMA+Installer.zip?

uliseo said:
L33Tgod, Did you have selinux in permissive mode before flashing ARISE+Deuteronomy+2.4+Add-ons+AROMA+Installer.zip?
Click to expand...
Click to collapse
it will give you that option in installer

[Discussion] Treble ROMs on Honor 9

I found out that there is no proper thread on Honor 9 Forum talking 'bout Treble ROMs,
from XDA forum and Openkirin team.
I wish this thread working as place for discussing about Issues and Fixes.
To start, Here's my personal result and infoes from replies.
It's not based on most recent version so plz report with your flash date or version No.
Waiting for report from Lineage, AOSIP, Omni, or others.
or issues about system, Xposed, SU, anything.
I'll edit OP with your reports.
RROS By mracar 07.28
Working
System
Magisk 16.7
Fingerprint
Issues
none.
Havoc OS By EnesSastim 07.25
Working
System
Magisk 16.7
Fingerprint
Issues
Huawei Quick-charge not working.
Havoc OS for HI3660 By Wirmpolter 08.09
Working
System
fingerprint
Issues
not working home button
on-screen nav bar is laggy
AOSP Phh-Treble By phhusson 07.03
Working
System
phh's SU
Fingerprint
Issues
none.
Pixel Experience By jhenrique09
Working
System
Magisk 16.6 16.7
Xposed
Issues
Volte
Fingerprint (maybe not)
AEX 5.5 By TingyiChen
Issues
Not working.
dotOS By mohancm
Issues
Not working.
ArrowOS By bauuuuu
Working
System
Issues
Can't mount external SD card with MTP
Omni ROM by Openkirin 07.22
Working
System
Issues
.
UPDATE : OP moved to Honor View 10. No more update will come.
Still, most of tips can be used to other Honor devices, so I will let this and other posts be.
It was nice to discuss about treble ROMs with you guys

I'll use here as TIP posting, mostly the basic ones.
1. Here's simple guide for magisk and stock camera.
UPDATE: add some tips about 9.0 GSI
https://forum.xda-developers.com/honor-9/how-to/guides-magisk-root-8-1-stock-camera-t3816078
2. TWRP for 8.1 GSI - Magisk, Gapps and re-stock tool. (mostly it's fine with just flashing stock system.img)
https://forum.xda-developers.com/ho...p-ish-twrp-3-2-1-honor-9-running-gsi-t3818442
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
no proper TWRP fro 9.0 GSI so far.
3. Use Huawei Update Extractor to extract SYSTEM, RAMDISK, RECOVERY_RAMDISK, KERNEL. don't forget to uncheck 'verify header checksum' at settings.
4. AudioFX app will break your earphon jack, so disable/unintall/delete it.
5. qemu.hw.mainkeys=1 to remove nav bar
6. /vender/usr/keylayout/fingerprint.kl to change fingerprint gesture.

TASON42 said:
I found out that there is proper thread on Honor 9 Forum talking 'bout Treble ROMs.
I wish this thread working as place for discussing about Issues and Fixes.
To start, Here's my personal result and infoes from replies.
It's not based on most recent version so plz report with your flash date or version No.
Waiting for report from Lineage, AOSIP, Omni, or others.
or issues about system, Xposed, SU, anything.
I'll edit OP with your reports.
RROS By mracar
Working
System
Magisk.
Issues
1. Sound awkward with earphone. fine with bluetooth or speaker.
2. Play Store not working properly. Need to manually restart everytime to start downloading apps.
Pixel Experience By jhenrique09
AEXBy TingyiChen
Issues
Not working.
AOSP Phh-Treble By phhusson
Working
System
phh's SU
Issues
None.
Click to expand...
Click to collapse
:good:

received report that Pixel Experience is working.
Need re-confirm, more information about magisk, xposed, issues, etc.

TASON42 said:
received report that Pixel Experience is working.
Need re-confirm, more information about magisk, xposed, issues, etc.
Click to expand...
Click to collapse
Magisk 16.7 work
Xposed work
Volte don't work
Fingerprint unlock don't work

phh's AOSP issue; Sound from Speaker no matter you plug earphone or not.
Not sure this is real issue or not since it's first time. I'll update after while.
UPDATE: Found out earphone is not working on phh's AOSP,
My earphone hardware is fine with stock one, so I guess it's sotfware issue.
Anyone have same problem? Anyone had and solved?
UPDATE: I did factory reset several times and dying earphone jack problem happens randomly.
You can't fix it without full wipe and re-install via fastboot and I don't know what's the trigger...

TASON42 said:
received report that Pixel Experience is working.
Need re-confirm, more information about magisk, xposed, issues, etc.
Click to expand...
Click to collapse
Boots only with magisk 16.6 (maybe 16.7 as well)
For me I wasnt able to access internal storage,not knowing why.
My fingerprint works well tho.
Previously on STFAL10 8.0.0.350,it is a AL00 but the OEMINFO got wrong before.
Sent from my Honor 9 using XDA Labs

Is there an 100% working TWRP? I know fastboot works, but twrp makes live easier.
Thanks

hujialun2002 said:
Boots only with magisk 16.6 (maybe 16.7 as well)
For me I wasnt able to access internal storage,not knowing why.
My fingerprint works well tho.
Previously on STFAL10 8.0.0.350,it is a AL00 but the OEMINFO got wrong before.
Sent from my Honor 9 using XDA Labs
Click to expand...
Click to collapse
Thx for the report.
accessing internal storage, means?
you mean MTP with usb connection to PC,
or TWRP backup, or typical file manager?
not working TWRP is normal, broken MTP happens, but never heard about not working file manager..

Saftpresse99 said:
Is there an 100% working TWRP? I know fastboot works, but twrp makes live easier.
Thanks
Click to expand...
Click to collapse
Since encryption one internal storage is not open yet, so there is no internal-storage-backup-capable TWRP right now.
But you can back up or flash things with and at external SD card, So it's working tho.

TASON42 said:
Thx for the report.
accessing internal storage, means?
you mean MTP with usb connection to PC,
or TWRP backup, or typical file manager?
not working TWRP is normal, broken MTP happens, but never heard about not working file manager..
Click to expand...
Click to collapse
The third one
It seems data partition is inaccessable on phone.In file manager it said content is inavailable the moment (or something like that).In browser when trying to download something it said selected location is inaccessible.Didnt try MTP but TWRP got stuck at splash screen.
It appears that AL varients is crappy when it comes to Treble...or it is something wrong with my device perhaps:crying:
Sent from my Honor 9 using XDA Labs

TASON42 said:
Since encryption one internal storage is not open yet, so there is no internal-storage-backup-capable TWRP right now.
But you can back up or flash things with and at external SD card, So it's working tho.
Click to expand...
Click to collapse
Thank you.
If i understand you correct, only backup/restore isn't working? Flashing (rom, gapps, magisk) and wipe (cache, data, system) works? Which TWRP should i flash?

Have you guys tried the overlays posted by dilemma in our forums? Do they fix issues like sound issues you mentioned earlier?

hujialun2002 said:
The third one
It seems data partition is inaccessable on phone.In file manager it said content is inavailable the moment (or something like that).In browser when trying to download something it said selected location is inaccessible.Didnt try MTP but TWRP got stuck at splash screen.
It appears that AL varients is crappy when it comes to Treble...or it is something wrong with my device perhaps:crying:
Sent from my Honor 9 using XDA Labs
Click to expand...
Click to collapse
You can try rebrand again, maybe...
Saftpresse99 said:
Thank you.
If i understand you correct, only backup/restore isn't working? Flashing (rom, gapps, magisk) and wipe (cache, data, system) works? Which TWRP should i flash?
Click to expand...
Click to collapse
I used TWRP from this forum, made by swiss flag man (I can't remember his name, but thread name is something like TWRP + capative fix)
you can't directly flash TWRP from 8.1 treble GSI (which will malfunction), but you can use TWRP by flash from 8.0 stock (maybe custom ROMs too) and flash GSI.
Double Chin Bigot said:
Have you guys tried the overlays posted by dilemma in our forums? Do they fix issues like sound issues you mentioned earlier?
Click to expand...
Click to collapse
specific URL, if you can....?'
UPDATE: I was too lazy to find what thread you were talking about back then, now I found the thread you talking about, but I think this overlay has nothing to do with sound issues.
It will be really thxful if you try and report tho.

TASON42 said:
You can try rebrand again, maybe...
Click to expand...
Click to collapse
Is there any chance that you sent the OEMINFO for STFAL00C00 to me?The one in HWOTA Is for AL10 and I didn't find the proper one

hujialun2002 said:
Is there any chance that you sent the OEMINFO for STFAL00C00 to me?The one in HWOTA Is for AL10 and I didn't find the proper one
Click to expand...
Click to collapse
Sorry man I don't have one, but I think you might be able to backup one by yourself with TWRP or Root file explorer, those things are working fine whatever legion code is, isn't it?

TASON42 said:
Sorry man I don't have one, but I think you might be able to backup one by yourself with TWRP or Root file explorer, those things are working fine whatever legion code is, isn't it?
Click to expand...
Click to collapse
I didn't backup and now it Is corrupted and it displays AL10
Sent from my Honor 9 using XDA Labs

hujialun2002 said:
I didn't backup and now it Is corrupted and it displays AL10
Sent from my Honor 9 using XDA Labs
Click to expand...
Click to collapse
There are some discussions about rebranding AL00 to AL100 to Cxxx at the thread, if I remember correctly.
If your OEMinfo is totally pooked up, you won't see AL10 either so I think you successfully rebranded your phone to AL10, at least...
I'm using L09 not AL variants, so I can't help you much but wish you good luck.

Testing ArrowOS, only rom without earphone problem, for now, to me, at least.
It has no Gapps, so I'm currently using my phone as ArrowOS + dirty flash phh's AOSP.
Also I would love to have some report about AEX 5.7 By AryanPatidar,
And my honor 9 don't boot up with Pixel Experience, which is not matching with report...

TASON42 said:
Testing ArrowOS, only rom without earphone problem, for now, to me, at least.
It has no Gapps, so I'm currently using my phone as ArrowOS + dirty flash phh's AOSP.
Also I would love to have some report about AEX 5.7 By AryanPatidar,
And my honor 9 don't boot up with Pixel Experience, which is not matching with report...
Click to expand...
Click to collapse
Flash Magisk 16.6 and PE will boot!
Sent from my Honor 9 using XDA Labs

[SOLVED] with Magisk installed is missed some gestures

I have TA-1046 with Pie and unlocked bootloader...
After install (via TWRP) Magisk (official zip release (tested 17.1 and 17.2)), then is missed:
From Settings/System/Gestures:
- Swipe fingerprint for notification
- Swipe up on Home button
- Lift to check phone
From Settings/Display:
- Double tap to wake
After uninstall Magisk, then all this gestures is available again, this is not (direct) related to unlocked bootloader, still have unlocked and without Magisk installed is all Gestures here...
I try following:
- enabled Magisk hide
- activated MagiskManager
- installed Magisk module "MagiskHide Props Config" (but not manualy changed anynthing in prop files)
Anyone have any tips for fixing this?
btw: screenshots is from DP4.1, but in Stable Pie is same problem...
UPDATE: thanks to Doktaphex, workaround found, confirmed with screenshot here
UPDATE2: actual version (1.7.4) not working, i not have installed other version before than 1.4.3, reinstalled this older version manualy from Download folder working

Where did you get TWRP for pie? Please guide me to the correct place
Broadcasted from Zeta Reticuli

I had the same issue! I'm on Official Android 9 (version 00WW_3_22C) TA1046, and i root it with magisk by following this method:
https://forum.xda-developers.com/nokia-7-plus/how-to/guide-how-to-root-ab-partition-scheme-t3792509
When i remove Magisk Module, Gesture navigation, Lift to check and Double tap to wake are available again!

Gravemind2015 said:
Where did you get TWRP for pie? Please guide me to the correct place
Broadcasted from Zeta Reticuli
Click to expand...
Click to collapse
I think he didn't flash TWRP, he booted into it and flashed Magisk. That's what I did too.
---------- Post added at 12:07 ---------- Previous post was at 11:35 ----------
I am on Oreo September and I keep getting a blank screen on Smart Lock. every time I enable it somehow (Settings>Lockscreen>Trust Agents>Disable Smart Lock>Reboot>Enable Smart Lock), it gets blank again after some time.

k3dar7 said:
I have TA-1046 with Pie and unlocked bootloader...
After install (via TWRP) Magisk (official zip release (tested 17.1 and 17.2)), then is missed:
From Settings/System/Gestures:
- Swipe fingerprint for notification
- Swipe up on Home button
- Lift to check phone
From Settings/Display:
- Double tap to wake
After uninstall Magisk, then all this gestures is available again, this is not (direct) related to unlocked bootloader, still have unlocked and without Magisk installed is all Gestures here...
I try following:
- enabled Magisk hide
- activated MagiskManager
- installed Magisk module "MagiskHide Props Config" (but not manualy changed anynthing in prop files)
Anyone have any tips for fixing this?
btw: screenshots is from DP4.1, but in Stable Pie is same problem...
Click to expand...
Click to collapse
I just got the OTA today and had the exact same problem. Initially i thought it was just a bug from the update and did a factory reset, and it worked and had the gestures back until I installed Magisk again. Did you find how to fix it?

Gravemind2015 said:
Where did you get TWRP for pie? Please guide me to the correct place
Click to expand...
Click to collapse
i not flash TWRP, install Magisk via ONLY BOOTed TWRP(Oreo version)
@siberflyers, @TheWing still no have sollution

Same problem here on TA1062.
Do we suspect it's the phone or magisk to blame?

@k3dar7 Need your help guys. I have switched back to Oreo after my brief stay on Pie. I have made a Github issue regarding this here https://github.com/topjohnwu/Magisk/issues/668
The dev has replied and is asking for the value of
cat /proc/mounts
Click to expand...
Click to collapse
on an UNROOTED (Magisk uninstalled) Pie. Could someone perhaps provide this info to the ticket contained above, to get a resolution to this issue?

braveheartleo said:
@k3dar7 Need your help guys. I have switched back to Oreo after my brief stay on Pie. I have made a Github issue regarding this here https://github.com/topjohnwu/Magisk/issues/668
The dev has replied and is asking for the value of on an UNROOTED (Magisk uninstalled) Pie. Could someone perhaps provide this info to the ticket contained above, to get a resolution to this issue?
Click to expand...
Click to collapse
info added: https://github.com/topjohnwu/Magisk/issues/668#issuecomment-433522871

braveheartleo said:
@k3dar7 Need your help guys. I have switched back to Oreo after my brief stay on Pie. I have made a Github issue regarding this here https://github.com/topjohnwu/Magisk/issues/668
The dev has replied and is asking for the value of on an UNROOTED (Magisk uninstalled) Pie. Could someone perhaps provide this info to the ticket contained above, to get a resolution to this issue?
Click to expand...
Click to collapse
Here is the output in a text file. Had one of my friend pull it out from his TA-1046 Global ROM Pie Stable, September patch.
I hope it helps (◕‿◕)
Edit: Commented on github with pastebin link. There already was one but I saw more lines on mine who decided to post it anyway

@k3dar7 @Gravemind2015 Many thanks Hopefully, this will lead to a fix so that Magisk properly supports our device on Pie sans the glitches.

If you use the PIX3LIFY mod, it will re-enable all missing gestures.

Doktaphex said:
If you use the PIX3LIFY mod, it will re-enable all missing gestures.
Click to expand...
Click to collapse
I install and active this module.... And nothing happens.... Gesture Navigation is still missing...

siberflyers said:
I install and active this module.... And nothing happens.... Gesture Navigation is still missing...
Click to expand...
Click to collapse
Strange. It worked for me, not that I was searching for a solution, so I thought that I would share my experience

Doktaphex said:
If you use the PIX3LIFY mod, it will re-enable all missing gestures.
Click to expand...
Click to collapse
You are a WIN, thx Work for me, missed gestures is back with Magisk/MagiskManager installed...
edit: add screenshot of Magisk/Modules

braveheartleo said:
@k3dar7 @Gravemind2015 Many thanks Hopefully, this will lead to a fix so that Magisk properly supports our device on Pie sans the glitches.
Click to expand...
Click to collapse
your issue be closed, but if i try magisk canary build 9592a69 then see problem not fixed, can you please try?
and if too have still problem with missed gesture (without forkaround with PIX3LIFY), then please reopen issue?

k3dar7 said:
your issue be closed, but if i try magisk canary build 9592a69 then see problem not fixed, can you please try?
and if too have still problem with missed gesture (without forkaround with PIX3LIFY), then please reopen issue?
Click to expand...
Click to collapse
Unfortunately, I can't do that atm. I'm on Oreo right now and I'm not moving up to Pie. I'm afraid you'll have to ask the others to try it out, and if they too concur with your experience, then I'd gladly reopen the issue. ?

braveheartleo said:
Unfortunately, I can't do that atm. I'm on Oreo right now and I'm not moving up to Pie. I'm afraid you'll have to ask the others to try it out, and if they too concur with your experience, then I'd gladly reopen the issue. ?
Click to expand...
Click to collapse
i think if you not have now Pie, then i wait if someone confirm/disprove and i reopen own issue

btw: actual (1.7.4) version Pix3lify stop working (=not enable missed gesture), i not have installed other version before than 1.4.3, reinstalled this (1.4.3) manualy from Download(if have installed this version before) folder working

With Pie Nobember update is now NOT need workaround using Pix3lify 1.4.3 mod...
now gestures is simply not blocked with installed Magisk (17.3 which is version BEFORE (not working for me) patch on Magisk side)

has anyone got viper4android working through magisk??

Hi,
I have taken a step forward to unlock and root my device (7days wait time ahead)..only for viper4android and dolby effects.
I have seen some folk saying that they got bootloop after installing viper4android through magisk. Has anybody out there got succeed in installing viper4android and dolby atmos through magisk???
Please share your experience and steps to follow. If it doesnt work, then i wont unlock my device:angel:. Please reply as soon as possible. Thanks.

Dolby not working fine. If you want you can try from here :
https://forum.xda-developers.com/an...lby-digital-plus-arise-20181115-t3868192/amp/
If it gives 'remote service has stopped' error, one user said that flashing viper from android solved it.
Now, as for viper, i am on eu rom miui 12 beta 20.4.30, the viper i downloaded from magisk app seems to be working okay.
You may try.
If any error occurs you may delete the module from data/adb/modules through the twrp.

sssaini007 said:
Dolby not working fine. If you want you can try from here :
https://forum.xda-developers.com/an...lby-digital-plus-arise-20181115-t3868192/amp/
If it gives 'remote service has stopped' error, one user said that flashing viper from android solved it.
Now, as for viper, i am on eu rom miui 12 beta 20.4.30, the viper i downloaded from magisk app seems to be working okay.
You may try.
If any error occurs you may delete the module from data/adb/modules through the twrp.
Click to expand...
Click to collapse
Got viper working good but dolby for android 10 is very buggy, so i gave up on dolby.

Finally,
My audio system has:
1. Viper4android
2. Dolby working, it closes when you change some switch, but still effect will work, just open again.
3. Anir Sauron MK III audio Mod - Magisk.
4. ICESound Magisk Mod
5. DTS X Ultra

vivek12341 said:
Hi,
I have taken a step forward to unlock and root my device (7days wait time ahead)..only for viper4android and dolby effects.
I have seen some folk saying that they got bootloop after installing viper4android through magisk. Has anybody out there got succeed in installing viper4android and dolby atmos through magisk???
Please share your experience and steps to follow. If it doesnt work, then i wont unlock my device:angel:. Please reply as soon as possible. Thanks.
Click to expand...
Click to collapse
I was trying that, i am on miui 12 indian rom and trying to do unlocking bootloader. after 7 days i was try again and the mi tool say 168.
i just want magisk on miui 12 indian rom and glad to having viper4android too
will you please guide me to unlock the bootloader? and it also delightful if you send the link of twrp and magisk for it, and thanks for those magisk modules, I'll definitely try if I will success to root.

vivek12341 said:
Finally,
My audio system has:
1. Viper4android
2. Dolby working, it closes when you change some switch, but still effect will work, just open again.
3. Anir Narsil audio Mod - Magisk.
4. Installed XtremeMusic Magisk Module which comes with an app that can enhance audio to Top quality 32bit 384khz and heavy clarity.
Click to expand...
Click to collapse
The 4th module sound like bull****. Our device can only output up to 24bit/192khz, there's no way it can output 32bit/384khz through software.

Never_Sm1le said:
The 4th module sound like bull****. Our device can only output up to 24bit/192khz, there's no way it can output 32bit/384khz through software.
Click to expand...
Click to collapse
Yes its bull****...and i have changed my current mod list. Have a look.

Never_Sm1le said:
The 4th module sound like bull****. Our device can only output up to 24bit/192khz, there's no way it can output 32bit/384khz through software.
Click to expand...
Click to collapse
Sauron still works on Android 10? I thought it only work on 9? Or are you confused with Narsil?

Ifi you want to use Dolby first you have to make your system permissive.

vivek12341 said:
Hi,
I have taken a step forward to unlock and root my device (7days wait time ahead)..only for viper4android and dolby effects.
I have seen some folk saying that they got bootloop after installing viper4android through magisk. Has anybody out there got succeed in installing viper4android and dolby atmos through magisk???
Please share your experience and steps to follow. If it doesnt work, then i wont unlock my device:angel:. Please reply as soon as possible. Thanks.
Click to expand...
Click to collapse
Hey bruh yeah i did please follow the steps
1)Download viper 2.7.1.6
2)Flash through magisk don't reboot ...not yet
3)Open V4A app let it install drivers and after that it will reboot.
4)Flash ACP if you have any crackling sound

vivek12341 said:
Got viper working good but dolby for android 10 is very buggy, so i gave up on dolby.
Click to expand...
Click to collapse
Please share how you do this

Viper working?

rooted With Magisk. Installed viper and can’t get it to enable. Has anyone got it working on this phone?

soundneedle said:
rooted With Magisk. Installed viper and can’t get it to enable. Has anyone got it working on this phone?
Click to expand...
Click to collapse
I followed the steps here and it is working fine.

mbk17 said:
I followed the steps here and it is working fine.
Click to expand...
Click to collapse
Wow. Thank you so much. Easiest thing I've ever had to do. Just flash the viper mod on that YT page. Really makes my AirPods Max come to life.

soundneedle said:
Wow. Thank you so much. Easiest thing I've ever had to do. Just flash the viper mod on that YT page. Really makes my AirPods Max come to life.
Click to expand...
Click to collapse
I was surprised how easy it was as well. It is certainly one of the best reasons to root.

Can someone share the file with me? The Youtube link with viper is not working anymore so I was unable to get the zip. I need viper in my life. Please .

@kirschdog1 I was able to make Viper work with the following steps.
Install Viper from Magisk Repo.Reboot and open app to install drivers.
Install busybox Magisk module and reboot.
Install Audio Modification Library module and reboot.
I don't know why but installing all three at the same time didn't seem to work for me.

I am running a Pixel 4a with dec security patch, rooted with magisk beta. I used the zip linked in the following post.
I also set it from SELinux permissive to enforcing, by disabling a boot script in the magisk module.
[APP][ALL ROOT SOLUTIONS][6.0+]ViPER4Android FX 2.7
ViPER4Android FX By pittvandewitt and MrWhite214 Introduction Many users are enhancing their smartphone audio experience with the popular ViPER4Android software, but some of us have a hard time installing the driver or they don't like the look...
forum.xda-developers.com

kirschdog1 said:
Can someone share the file with me? The Youtube link with viper is not working anymore so I was unable to get the zip. I need viper in my life. Please .
Click to expand...
Click to collapse
There you go

Has anyone been able to use viper on android 11 other than using magisk version 21, and using an updated viper version

soundneedle said:
rooted With Magisk. Installed viper and can’t get it to enable. Has anyone got it working on this phone?
Click to expand...
Click to collapse
Viper seems so, now I still need to know about connection recording ... Then I use this ROM

I am on latest Magisk Canary and Viper works fine for me by following this guide.

I tried everything with magisk version and the other puhlic versions around with about every thread I found. The mentioned above I also tried. But it only worked when I switch selinux to permissive. With magisk canary 22 104
Im on most actual mai update