hello guys
im using a xperia z5 e6653 on MM 6.0.1 32.2.A.0.253 with open BL, stock firmware and kernel
i am trying to install viper audio mod without success. after flashing the last zip and installing the driver (busybox installed, of course) the driver status tells, that the driver is installed, working, using neon BUT the proccessing is disabled. none of the sound modifications are working.
can anyone tell me why?
thanks
anyone? am i the only one trying to install this mod on my device?
Caffeineshock said:
anyone? am i the only one trying to install this mod on my device?
Click to expand...
Click to collapse
Try to disable sony soundenhancement or use viper4android compability mode.
Install SELinux and set it to permissive. A little bit of struggling with it and it will work.
Already tried the permissive mode also used a zip that disables any other mod (it should)
Gesendet von meinem E6653 mit Tapatalk
Well that's weird because it has always been working this way for me. Even right now. Just don't use the latest version of V4A since it doesn't work very well on our phones.
how exactly did you do it?
Install Viper + Drivers. Set kernel to permissive using SE Linux, that's all. I use Viper v2.3.4.0 (FX), Codename "Beautiful". This is the version that's working on our phones with Marshmallow.
Any one got this working in Nougat ? Please share which version its working as I tried a lot and was able to install but I get no sound when its processing.
Thanks
GryTEcHoG said:
Any one got this working in Nougat ? Please share which version its working as I tried a lot and was able to install but I get no sound when its processing.
Thanks
Click to expand...
Click to collapse
install ARISE sound system deuteryum 2.4 ( or something like that) and choose plus mods aroma installer and flash it in twrp and you are good to go
L33Tgod said:
install ARISE sound system deuteryum 2.4 ( or something like that) and choose plus mods aroma installer and flash it in twrp and you are good to go
Click to expand...
Click to collapse
Thanks for the reply. Did you test it ? What is your device ? I have tried Arise mod before, just like others it gets installed and processing the sound but it gives no sound.
GryTEcHoG said:
Thanks for the reply. Did you test it ? What is your device ? I have tried Arise mod before, just like others it gets installed and processing the sound but it gives no sound.
Click to expand...
Click to collapse
I have Xperia Z5 E6653, stock nougat 32.3.A.0.376 with stock patched kernel, and tried normal ARISE project before and it didn't work, but now i tried this : https://www.androidfilehost.com/?fid=745425885120703424
and it is working very very good, sound is much much louder, so try it, but first backup your build.prop, if you want to go back to stock.
PM me the results.
L33Tgod said:
I have Xperia Z5 E6653, stock nougat 32.3.A.0.376 with stock patched kernel, and tried normal ARISE project before and it didn't work, but now i tried this : https://www.androidfilehost.com/?fid=745425885120703424
and it is working very very good, sound is much much louder, so try it, but first backup your build.prop, if you want to go back to stock.
PM me the results.
Click to expand...
Click to collapse
I Will try and let you know asp. What was your status with other versions when you installed it ? Just like mine with no sound when its processing ? For me all the versions are installed successfully and driver status shows its processing, but i have no sound at all.
Thanks
EDIT: Did you install all the add ons ? Can you get this working only viper and no add ons ?
GryTEcHoG said:
I Will try and let you know asp. What was your status with other versions when you installed it ? Just like mine with no sound when its processing ? For me all the versions are installed successfully and driver status shows its processing, but i have no sound at all.
Thanks
EDIT: Did you install all the add ons ? Can you get this working only viper and no add ons ?
Click to expand...
Click to collapse
i strongly suggest to install dolby atmos,because it will give you strong volume boost, i installed all the addons, you should too, it is easy to disable it in settings
L33Tgod said:
i strongly suggest to install dolby atmos,because it will give you strong volume boost, i installed all the addons, you should too, it is easy to disable it in settings
Click to expand...
Click to collapse
L33Tgod, Did you have selinux in permissive mode before flashing ARISE+Deuteronomy+2.4+Add-ons+AROMA+Installer.zip?
uliseo said:
L33Tgod, Did you have selinux in permissive mode before flashing ARISE+Deuteronomy+2.4+Add-ons+AROMA+Installer.zip?
Click to expand...
Click to collapse
it will give you that option in installer
Related
After I updated my Nexus 5 with July's security patches (MOB30P), every time it plays any sound, it seems muffled. I haven't yet had time to roll back to MOB30M to confirm this as the cause, but I will later today. Has anyone else experienced this problem?
I just experienced exactly the same thing. :crying: Rolled back to M and the problem goes away. It's not just muffled, it's also of considerably lower volume. I haven't had a chance to check out the headphone or bluetooth sound; maybe over the weekend.
I'm running rooted stock 6.0.1. Only mod to stock is a big hosts file. SuperSU is 2.76, installs itself in systemless mode, and my busybox is installed in the same folder as SuperSU (i.e., not in the System volume).
I have the same issue, its just on speaker, headphone is ok. The sound is muffled and low quality.
Update : I have a solution, flash Franco's Kernel over the ROM you are using & adjust sound values via Kernel Adiutor to experience amazing sounds again.
drive2droad said:
Update : I have a solution, flash Franco's Kernel over the ROM you are using & adjust sound values via Kernel Adiutor to experience amazing sounds again.
Click to expand...
Click to collapse
Also it can be to flash the stock kernel boot.img (3.4.0 - g6a99a02) via Fastboot from old stock build MOB30M.
It's a known bug for revision P
It's a kernel bug so either using the kernel from version M or use any third party kernel like Franco or ElementalX 6.17
crisis_trustee said:
Also it can be to flash the stock kernel boot.img (3.4.0 - g6a99a02) via Fastboot from old stock build MOB30M.
Click to expand...
Click to collapse
Which probably breaks this: https://code.google.com/p/android/issues/detail?id=195104#c21
I knew about this issue from Android Police but I updated regardless.
I regret.
Any solution for a stock non-rooted user? ;(
omg, this is killing me. i can't hear rings etc when i'm working, and barely at all in a silent room. my phone isn't rooted, and i'm a tech dunce. are there any relatively straightforward links to solving this...eg, flashing the older rom? i can't have this phone acting like this.
I had same problem but after flashing this everything is fine.
https://github.com/eugenesan/android_kernel_lge_hammerhead/releases/tag/6.0.1-MOB30P-Audio-Fix
respawn05 said:
I had same problem but after flashing this everything is fine.
https://github.com/eugenesan/android_kernel_lge_hammerhead/releases/tag/6.0.1-MOB30P-Audio-Fix
Click to expand...
Click to collapse
I am not rooted.
If I flash this, will it affect further OTA?
Sent from my Nexus 5 using Tapatalk
lpganesh said:
I am not rooted.
If I flash this, will it affect further OTA?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I am not sure but I think you will be OK for OTA's.
If you're rooted and cool with custom kernel you can flash elementalX 6.19 or blue spark r96,its work fine with my nexus5 .. if you're non rooted or stock lover you can reflash MOB30M via fastboot or just wait for next month security patch update..regards
Nexus 5
i'm rooted
my version is actually 6.0.1. MoB30P
the sound is a ****
i would like to flash this fix
have I to flash only the boot.img ?
what are the other files, and how (if necessary) can they be used ?
0001-ASoC-compress-fix-unsigned-integer-overflow-check.patch
0002-Soc-msm-qdsp6v2-Fix-improper-param-checks.patch
0003-Fix-build-with-recent-Perl-versions.patch
8.93 MBboot.img
Hi guys, here is a fix for low sound that Xiaomi "fixed" for us.
Magisk module https://www.dropbox.com/s/jvejynqlw5gz0l6/soundfix_test.zip?dl=0
MD5: 64D9A517EBDD77D7EACD087E1A33FF07
Thanks to KatsonWatson from 4pda
Hi,
Can you tell me if it's working for you (and where is this from)? My phone is not rooted etc., but I can't stand this new poor audio on a pair of high impedance earphones.
Is it installed like a module from zip via recovery?
TheDoom said:
Hi,
Can you tell me if it's working for you (and where is this from)? My phone is not rooted etc., but I can't stand this new poor audio on a pair of high impedance earphones.
Is it installed like a module from zip via recovery?
Click to expand...
Click to collapse
Install and flash Magisk and then install the module vía Magisk interface.
Magisk Is systemless so it's safe to use.
Cant tell if this module works since i still didnt update may patch but dont be afraid to try. I used this to root and install GoogleCam, no issues so far.
Just remember to follow the instructions before installing new OTAs!!
Thanks for the help! So installing this means no more OTA for me? Because I guess that any other update that comes out will bring back the crappy sound.
BTW is Google Cam a huge improvement?
TheDoom said:
Thanks for the help! So installing this means no more OTA for me? Because I guess that any other update that comes out will bring back the crappy sound.
BTW is Google Cam a huge improvement?
Click to expand...
Click to collapse
Google cam is A LOT better than stock camera.
Wysłane z mojego Mi A1 przy użyciu Tapatalka
Yup, you'll need to root and ofc use magisk (because this is magisk module) and you can't do OTAs, but for the sound that our device has, it's worth it.
Deni_NS said:
Yup, you'll need to root and ofc use magisk (because this is magisk module) and you can't do OTAs, but for the sound that our device has, it's worth it.
Click to expand...
Click to collapse
Magisk does not prevent OTA updates, as long as you know what you are doing.
To wit: 0. disable automatic OTA updates, 1. leave the stock recovery alone (TWRP can be booted into without flashing), 2. make sure to check "systemless hosts" in Magisk Manager if you use AdAway or similar, so that you don't ever write to your actual /system partition, 3. leave your phone oem-unlocked (it's OK, /data is encrypted anyway), 4. when an OTA update is available, follow instructions (can't post a proper URL yet, sorry) at github.com/topjohnwu/Magisk/blob/master/docs/tips.md
cmmike1 said:
Magisk does not prevent OTA updates, as long as you know what you are doing.
To wit: 0. disable automatic OTA updates, 1. leave the stock recovery alone (TWRP can be booted into without flashing), 2. make sure to check "systemless hosts" in Magisk Manager if you use AdAway or similar, so that you don't ever write to your actual /system partition, 3. leave your phone oem-unlocked (it's OK, /data is encrypted anyway), 4. when an OTA update is available, follow instructions (can't post a proper URL yet, sorry) at github.com/topjohnwu/Magisk/blob/master/docs/tips.md
Click to expand...
Click to collapse
Yeah, but will another OTA overwrite my Magisk Sound Fix or Google Cam?
TheDoom said:
Yeah, but will another OTA overwrite my Magisk Sound Fix or Google Cam?
Click to expand...
Click to collapse
It won't, that's what "systemless" means.
Working fine, Thanks
Wysłane z mojego Mi A1 przy użyciu Tapatalka
I'm glad to hear that [emoji4]
I can confirm that it works on my phone also. Thank you very much!
May I ask what files the module touches? Also, what did Xiaomi change in the May update to reduce the volume?
Thanks
You can unpack module and see what is changed.
thanks, but when i enable this module the mi a1 hardware keys backlight doesnt work
deewfrank said:
thanks, but when i enable this module the mi a1 hardware keys backlight doesnt work
Click to expand...
Click to collapse
Work for me
Work fine! I love it
When I try to install it via Magisk Manager, it says it's not a magisk module. I don't have custom recovery to preserve OTA, can't it be flashed through magisk somehow?
Can someone confirm if this is working with the last 8.1 update? They improved audio a little bit compared to 8.0 but its nothing compared to the nougat ROM
AceStroke said:
Can someone confirm if this is working with the last 8.1 update? They improved audio a little bit compared to 8.0 but its nothing compared to the nougat ROM
Click to expand...
Click to collapse
Work on June and July update
Guys, which zip should I flash to get Viper on my Stock ROM, and how to do it to ensure it gets no interference from the system's EQ ?
Also, is there a better mod?
I've tried to install viper4android and AinurDSP on stock with magisk and it's also doesn't work.
Madhuvrata said:
I've tried to install viper4android and AinurDSP on stock with magisk and it's also doesn't work.
Click to expand...
Click to collapse
I knew it! Most Magical modules fail to get flashed on Color OS. I just use Equaliser FX and increase the low and high frequencies a bit, and it sounds somewhat better.
YouTube Vanced works.
Hi,
I have taken a step forward to unlock and root my device (7days wait time ahead)..only for viper4android and dolby effects.
I have seen some folk saying that they got bootloop after installing viper4android through magisk. Has anybody out there got succeed in installing viper4android and dolby atmos through magisk???
Please share your experience and steps to follow. If it doesnt work, then i wont unlock my device:angel:. Please reply as soon as possible. Thanks.
Dolby not working fine. If you want you can try from here :
https://forum.xda-developers.com/an...lby-digital-plus-arise-20181115-t3868192/amp/
If it gives 'remote service has stopped' error, one user said that flashing viper from android solved it.
Now, as for viper, i am on eu rom miui 12 beta 20.4.30, the viper i downloaded from magisk app seems to be working okay.
You may try.
If any error occurs you may delete the module from data/adb/modules through the twrp.
sssaini007 said:
Dolby not working fine. If you want you can try from here :
https://forum.xda-developers.com/an...lby-digital-plus-arise-20181115-t3868192/amp/
If it gives 'remote service has stopped' error, one user said that flashing viper from android solved it.
Now, as for viper, i am on eu rom miui 12 beta 20.4.30, the viper i downloaded from magisk app seems to be working okay.
You may try.
If any error occurs you may delete the module from data/adb/modules through the twrp.
Click to expand...
Click to collapse
Got viper working good but dolby for android 10 is very buggy, so i gave up on dolby.
Finally,
My audio system has:
1. Viper4android
2. Dolby working, it closes when you change some switch, but still effect will work, just open again.
3. Anir Sauron MK III audio Mod - Magisk.
4. ICESound Magisk Mod
5. DTS X Ultra
vivek12341 said:
Hi,
I have taken a step forward to unlock and root my device (7days wait time ahead)..only for viper4android and dolby effects.
I have seen some folk saying that they got bootloop after installing viper4android through magisk. Has anybody out there got succeed in installing viper4android and dolby atmos through magisk???
Please share your experience and steps to follow. If it doesnt work, then i wont unlock my device:angel:. Please reply as soon as possible. Thanks.
Click to expand...
Click to collapse
I was trying that, i am on miui 12 indian rom and trying to do unlocking bootloader. after 7 days i was try again and the mi tool say 168.
i just want magisk on miui 12 indian rom and glad to having viper4android too
will you please guide me to unlock the bootloader? and it also delightful if you send the link of twrp and magisk for it, and thanks for those magisk modules, I'll definitely try if I will success to root.
vivek12341 said:
Finally,
My audio system has:
1. Viper4android
2. Dolby working, it closes when you change some switch, but still effect will work, just open again.
3. Anir Narsil audio Mod - Magisk.
4. Installed XtremeMusic Magisk Module which comes with an app that can enhance audio to Top quality 32bit 384khz and heavy clarity.
Click to expand...
Click to collapse
The 4th module sound like bull****. Our device can only output up to 24bit/192khz, there's no way it can output 32bit/384khz through software.
Never_Sm1le said:
The 4th module sound like bull****. Our device can only output up to 24bit/192khz, there's no way it can output 32bit/384khz through software.
Click to expand...
Click to collapse
Yes its bull****...and i have changed my current mod list. Have a look.
Never_Sm1le said:
The 4th module sound like bull****. Our device can only output up to 24bit/192khz, there's no way it can output 32bit/384khz through software.
Click to expand...
Click to collapse
Sauron still works on Android 10? I thought it only work on 9? Or are you confused with Narsil?
Ifi you want to use Dolby first you have to make your system permissive.
vivek12341 said:
Hi,
I have taken a step forward to unlock and root my device (7days wait time ahead)..only for viper4android and dolby effects.
I have seen some folk saying that they got bootloop after installing viper4android through magisk. Has anybody out there got succeed in installing viper4android and dolby atmos through magisk???
Please share your experience and steps to follow. If it doesnt work, then i wont unlock my device:angel:. Please reply as soon as possible. Thanks.
Click to expand...
Click to collapse
Hey bruh yeah i did please follow the steps
1)Download viper 2.7.1.6
2)Flash through magisk don't reboot ...not yet
3)Open V4A app let it install drivers and after that it will reboot.
4)Flash ACP if you have any crackling sound
vivek12341 said:
Got viper working good but dolby for android 10 is very buggy, so i gave up on dolby.
Click to expand...
Click to collapse
Please share how you do this
rooted With Magisk. Installed viper and can’t get it to enable. Has anyone got it working on this phone?
soundneedle said:
rooted With Magisk. Installed viper and can’t get it to enable. Has anyone got it working on this phone?
Click to expand...
Click to collapse
I followed the steps here and it is working fine.
mbk17 said:
I followed the steps here and it is working fine.
Click to expand...
Click to collapse
Wow. Thank you so much. Easiest thing I've ever had to do. Just flash the viper mod on that YT page. Really makes my AirPods Max come to life.
soundneedle said:
Wow. Thank you so much. Easiest thing I've ever had to do. Just flash the viper mod on that YT page. Really makes my AirPods Max come to life.
Click to expand...
Click to collapse
I was surprised how easy it was as well. It is certainly one of the best reasons to root.
Can someone share the file with me? The Youtube link with viper is not working anymore so I was unable to get the zip. I need viper in my life. Please .
@kirschdog1 I was able to make Viper work with the following steps.
Install Viper from Magisk Repo.Reboot and open app to install drivers.
Install busybox Magisk module and reboot.
Install Audio Modification Library module and reboot.
I don't know why but installing all three at the same time didn't seem to work for me.
I am running a Pixel 4a with dec security patch, rooted with magisk beta. I used the zip linked in the following post.
I also set it from SELinux permissive to enforcing, by disabling a boot script in the magisk module.
[APP][ALL ROOT SOLUTIONS][6.0+]ViPER4Android FX 2.7
ViPER4Android FX By pittvandewitt and MrWhite214 Introduction Many users are enhancing their smartphone audio experience with the popular ViPER4Android software, but some of us have a hard time installing the driver or they don't like the look...
forum.xda-developers.com
kirschdog1 said:
Can someone share the file with me? The Youtube link with viper is not working anymore so I was unable to get the zip. I need viper in my life. Please .
Click to expand...
Click to collapse
There you go
Has anyone been able to use viper on android 11 other than using magisk version 21, and using an updated viper version
soundneedle said:
rooted With Magisk. Installed viper and can’t get it to enable. Has anyone got it working on this phone?
Click to expand...
Click to collapse
Viper seems so, now I still need to know about connection recording ... Then I use this ROM
I am on latest Magisk Canary and Viper works fine for me by following this guide.
I tried everything with magisk version and the other puhlic versions around with about every thread I found. The mentioned above I also tried. But it only worked when I switch selinux to permissive. With magisk canary 22 104
Im on most actual mai update