Related
Hi guys ,
I have a rooted nexus 5 running on original stock rom with clockwork recovery installed. I have been getting pop ups to download Andriod 5.0 for last 10 days , Every time I download it , it takes me to recovery and than gives me a message "unable to open the package etc." and cancels the install.
I have tried clearing up the cache , did factory reset , same result everytime.
Any suggestions what can i do ?
You need to be 100% stock (including recovery) to accept the OTA. Restore your phone to full stock and try again.
_MetalHead_ said:
You need to be 100% stock (including recovery) to accept the OTA. Restore your phone to full stock and try again.
Click to expand...
Click to collapse
How do I do that ?
This is wifey's phone , if she looses her data 1 more time than I m dead.
Flash the newest factory image in fastboot, just dont flash the userdata image.
Lokke9191 said:
Flash the newest factory image in fastboot, just dont flash the userdata image.
Click to expand...
Click to collapse
So If I just download 5.0.1 (LRX22C) from https://developers.google.com/android/nexus/images and flash it via Fastboot , It will take phone back to Factory state and root will be lost ?
namz said:
So If I just download 5.0.1 (LRX22C) from https://developers.google.com/android/nexus/images and flash it via Fastboot , It will take phone back to Factory state and root will be lost ?
Click to expand...
Click to collapse
Ya root will be lost. Just unzip that image fully. Then flash everything but userdata individually. She wont lose her data or setup. Then fastboot flash twrp. Boot into twrp and install supersu. Good to go.
Lokke9191 said:
Ya root will be lost. Just unzip that image fully. Then flash everything but userdata individually. She wont lose her data or setup. Then fastboot flash twrp. Boot into twrp and install supersu. Good to go.
Click to expand...
Click to collapse
Thanks So i assuming userdata is one of the files that will come once I unzip the downloaded file ?
namz said:
Thanks So i assuming userdata is one of the files that will come once I unzip the downloaded file ?
Click to expand...
Click to collapse
Ya itll be on there. Also you dont need to flash the bootloader either, being that its the same as the 5.0 one.
Lokke9191 said:
Ya itll be on there. Also you dont need to flash the bootloader either, being that its the same as the 5.0 one.
Click to expand...
Click to collapse
Cool Thanks , Btw its on 4.4 atm , so I have flash bootloader file. Will give a try !!
namz said:
Cool Thanks , Btw its on 4.4 atm , so I have flash bootloader file. Will give a try !!
Click to expand...
Click to collapse
wait
---------- Post added at 10:03 PM ---------- Previous post was at 10:01 PM ----------
Lokke9191 said:
wait
Click to expand...
Click to collapse
If its on 4.4 you should do a clean install as its a big upgrade. To save her data, flash the 4.4 recovery, and boot images. That should bring you back to stock so you can just take the ota.
Thatll work as long as you haven't made any further modifications.
Lokke9191 said:
wait
---------- Post added at 10:03 PM ---------- Previous post was at 10:01 PM ----------
If its on 4.4 you should do a clean install as its a big upgrade. To save her data, flash the 4.4 recovery, and boot images. That should bring you back to stock so you can just take the ota.
Thatll work as long as you haven't made any further modifications.
Click to expand...
Click to collapse
Hmm where do I get 4.4 recovery and boot images from
Uh oh. I think you were too late.
namz said:
Hmm where do I get 4.4 recovery and boot images from
Click to expand...
Click to collapse
Is the 4.4 image available from google site?
---------- Post added at 10:08 PM ---------- Previous post was at 10:06 PM ----------
Lokke9191 said:
Is the 4.4 image available from google site?
Click to expand...
Click to collapse
They are here just unzip the proper image
https://developers.google.com/android/nexus/images
lbingham said:
Uh oh. I think you were too late.
Click to expand...
Click to collapse
Lol. I thought he was already on 5.0. Glad i caught him in time. I know how pissed my wife gets when I mod or flash stuff to her phone and she doesn't like the outcome, or the version is buggy, or she has to re setup her stuff. Glad I can help other avoid that
Lokke9191 said:
Is the 4.4 image available from google site?
---------- Post added at 10:08 PM ---------- Previous post was at 10:06 PM ----------
They are here just unzip the proper image
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
OK. So download 4.4.4 and unzip and flash only recovery and boot images via fastboot ( boot images would be files ending with .img , i.e. more than 1 file ?
namz said:
OK. So download 4.4.4 and unzip and flash only recovery and boot images via fastboot ( boot images would be files ending with .img , i.e. more than 1 file ?
Click to expand...
Click to collapse
Flash "boot.img" its only one file. Then flash "recovery. img" also one file. So two files total.
Hello all,
I have been going slightly mad today trying to get my mate 7 2GB back from CWM to stock recovery. The main problem is that I do not have a stock recovery image. But after being shown where to find one, I noticed that I could not get it successfully flashed either.
Since I do not really know how to do this, I used flashify, but that did not work and either returned me to the CWM or sent me to rescue.
Can someone help me to a) get a stock recovery image for the Mate 7 version MT7-L09 and b) show me how to properly flash it?
Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?
djzero86 said:
Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?
Click to expand...
Click to collapse
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?
Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device
dekraan said:
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?
Click to expand...
Click to collapse
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
Ali_adel_medo said:
Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device
Click to expand...
Click to collapse
You have a unlocked bootloader???
Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more
Ali_adel_medo said:
Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more
Click to expand...
Click to collapse
Do you tried flash via fastboot ?
fastboot flash recovery recovery.img
Or try to use this tool
http://forum.xda-developers.com/mat...custom-recovery-tool-mt7-l10-l10-mt7-t3022424
This should work.
The fast boot just stucks at waiting for device
And the tool you send says that the stock recovery works only on tl_09 and my device is tl_10
djzero86 said:
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
You have a unlocked bootloader???
Click to expand...
Click to collapse
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?
I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
dekraan said:
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?
Click to expand...
Click to collapse
Ok.... you have the stock recovery now???
djzero86 said:
I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
Ok.... you have the stock recovery now???
Click to expand...
Click to collapse
I think so. If stock looks like I described: black screen, large EMUI logo, and the options reboot system now, wipe data/factory reset and wipe cache partition?
That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...
djzero86 said:
That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...
Click to expand...
Click to collapse
Great, thank you for your fantastic help!
I will get a new micro-sd card tomorrow, and will try it right away!
Good luck... come back to report
djzero86 said:
Good luck... come back to report
Click to expand...
Click to collapse
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??
dekraan said:
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??
Click to expand...
Click to collapse
Ok, I just reinstalled the B137P03 version from the how to install lollipop thread, and that went successful. Now going to try the update.zip! Keep you posted
Ah, now we're talking It seems to have worked. Phone is now showing 'Android is upgrading' and 'optimising app.....'
Great! It does seem strange I had to reinstall the B137SP03 rom, but that did the trick!
I am not responsible if you don't know
what you are getting into and end up messing up your phone
In order to root K6 Note you need to do the following,
1. Unlock boot loader. how to do that follow here >>
http://lenovo-forums.ru/topic/21685-lenovo-vibe-k6-note-разблокировка-bootloader
( It will Wipe all Data)
2. Install Twrp from here>>
http://lenovo-forums.ru/topic/21687-lenovo-vibe-k6-note-rasshirennoe-rekaveri-twrp-by-sevenmaxs/
3. Modify boot image and flash modified boot image with Carliv Image Kitchen from here >>
https://forum.xda-developers.com/android/development/tool-cika-carliv-image-kitchen-android-t3013658
4. Changing Values in boot.img
Unpack the boot image using the above tool, once unpacked go the unpack folder then into ramdisk folder and edit the default.prop using notepad++ or wordpad
Change the value of the following lines
1. ro.secure=1 to ro.secure=0
2. security.pref_harden= 1 to security.pref_harden= 0
(Change only 1 to 0 nothing else & do not forget to save the file )
3.Once done repack the boot image using the above tool.
5 .Flash the modified boot.image through fastboot, how to flash through fastboot refer here>>
https://forum.xda-developers.com/showthread.php?t=1752270
6. Reboot into recovery and flash supersu from here>>
https://download.chainfire.eu/1001/S…perSU-v2.78-20
The supersu installation should be successful now. reboot and you will see supersu app in the app drawer. Cheers :good::good::good::good:
(P.S I have attached the modified boot image for firmware k53_s123_170216_ROW, so no need to modify the boot image if you are on this firmware.)
Where is the attached k53_s123_170216_ROW boot image ?
mehmet6ok said:
Where is the attached k53_s123_170216_ROW boot image ?
Click to expand...
Click to collapse
Boot.img updated. Cheers
Sounds interesting thanks as I keep getting errors trying to flash SuperSU or Magisk.
I'm on firmware k53_s123_170216_ROW so I will be able to use your boot.img but how would one go about getting the boot.img to modify ? The Nandroid backup is in the boot.emmc.win format and the whole partition I suppose ?
---------- Post added at 08:36 AM ---------- Previous post was at 08:27 AM ----------
Oops so I flashed your boot.img :
tools>fastboot flash boot boot.img
target reported max download size of 535822336 bytes
sending 'boot' (24894 KB)...
OKAY [ 0.816s]
writing 'boot'...
OKAY [ 0.331s]
finished. total time: 1.151s
Click to expand...
Click to collapse
At the end on the screen it says in green at the top "flashing boot ...", rebooted into TWRP 3.0.3.0 with long "VOL UP+VOL DOWN" + "POWER" press.
Tried to install :
- UPDATE-SuperSU-v2.78-20160905010000.zip (the one you mention)
- SuperSU-v2.79-201612051815.zip
- Magisk-v12.0.zip
But they all fail unfortunately, same error message as before flashing your boot.img :
Magisk12 error :
"Unable to unpack boot.img"
SuperSU error :
"-Extracting ramdisk
--- Failure, aborting"
My model is K53a48
---------- Post added at 08:50 AM ---------- Previous post was at 08:36 AM ----------
ok, I updated to TWRP-3.1.0.1_K53a48_by_SevenMaxs.7z and I was able to flash SuperSU-v2.79-201612051815.zip without errors. All booted up and SuperSU in the app drawer and rooted, thanks for the tips, man !
A few more questions if I may :
- is there a stock recovery to put back the K6 Note in factory mode ?
- how does one go about getting the boot.img out of a device for patching ?
If will not modify the boot.img what will gonna happen?
Thanks to this furom....Really help for me
webvan said:
Sounds interesting thanks as I keep getting errors trying to flash SuperSU or Magisk.
I'm on firmware k53_s123_170216_ROW so I will be able to use your boot.img but how would one go about getting the boot.img to modify ? The Nandroid backup is in the boot.emmc.win format and the whole partition I suppose ?
---------- Post added at 08:36 AM ---------- Previous post was at 08:27 AM ----------
Oops so I flashed your boot.img :
At the end on the screen it says in green at the top "flashing boot ...", rebooted into TWRP 3.0.3.0 with long "VOL UP+VOL DOWN" + "POWER" press.
Tried to install :
- UPDATE-SuperSU-v2.78-20160905010000.zip (the one you mention)
- SuperSU-v2.79-201612051815.zip
- Magisk-v12.0.zip
But they all fail unfortunately, same error message as before flashing your boot.img :
Magisk12 error :
"Unable to unpack boot.img"
SuperSU error :
"-Extracting ramdisk
--- Failure, aborting"
My model is K53a48
---------- Post added at 08:50 AM ---------- Previous post was at 08:36 AM ----------
ok, I updated to TWRP-3.1.0.1_K53a48_by_SevenMaxs.7z and I was able to flash SuperSU-v2.79-201612051815.zip without errors. All booted up and SuperSU in the app drawer and rooted, thanks for the tips, man !
A few more questions if I may :
- is there a stock recovery to put back the K6 Note in factory mode ?
- how does one go about getting the boot.img out of a device for patching ?
Click to expand...
Click to collapse
Big Question
If I will not patch the boot.img and flash the new 3.1.0.1_K53a48_by_SevenMaxs.7z and then flash the
SuperSU-v2.79-201612051815.zip
will it be successfull?
Yeah I can't flash SuperSU-v2.79-201612051815.zip
In old twrp...SuperSu App never apper in my home drawer...
---------- Post added at 06:29 AM ---------- Previous post was at 06:06 AM ----------
Do you have a custom kernel?
Why don't you want to use the patched boot.img ?
You tried with the new TWRP-3.1.0.1 and it doesn't work ?
firemax13 said:
Big Question
If I will not patch the boot.img and flash the new 3.1.0.1_K53a48_by_SevenMaxs.7z and then flash the
SuperSU-v2.79-201612051815.zip
will it be successfull?
Yeah I can't flash SuperSU-v2.79-201612051815.zip
In old twrp...SuperSu App never apper in my home drawer...
---------- Post added at 06:29 AM ---------- Previous post was at 06:06 AM ----------
Do you have a custom kernel?
Click to expand...
Click to collapse
webvan said:
Why don't you want to use the patched boot.img ?
You tried with the new TWRP-3.1.0.1 and it doesn't work ?
Click to expand...
Click to collapse
So I need to flash the modified boot.img to flash the updated twrp and then to flash the supersu.zip successfully?
I Mean flash the modified boot.img and the updated twrp will work?
firemax13 said:
So I need to flash the modified boot.img to flash the updated twrp and then to flash the supersu.zip successfully?
I Mean flash the modified boot.img and the updated twrp will work?
Click to expand...
Click to collapse
You cannot flash supersu without the modified boot image.
You need to flash the recovery and modified boot image to successfully flash supersu.
adilrenzu said:
You cannot flash supersu without the modified boot image.
You need to flash the recovery and modified boot image to successfully flash supersu.
Click to expand...
Click to collapse
Thanks to your reply.....sorry Im so curious about it.....
So we gonna still receiving the OTA updates after flashing the modified boot.img and twrp and ROOT? .....Or we can still update our devices after all the things happen??
sorry for noob question and bad ass english
firemax13 said:
Thanks to your reply.....sorry Im so curious about it.....
So we gonna still receiving the OTA updates after flashing the modified boot.img and twrp and ROOT? .....Or we can still update our devices after all the things happen??
sorry for noob question and bad ass english
Click to expand...
Click to collapse
To receive OTA's you need to be on stock recovery, and stock boot image without any modification to the system partition.
Can the stock recovery be downloaded anywhere ? Thanks !
adilrenzu said:
To receive OTA's you need to be on stock recovery, and stock boot image without any modification to the system partition.
Click to expand...
Click to collapse
Again thanks to your reply
Still waiting for official custom rom and official custom recovery.......I hope lineage os listening to us.....
firemax13 said:
Again thanks to your reply
Still waiting for official custom rom and official custom recovery.......I hope lineage os listening to us.....
Click to expand...
Click to collapse
as for custom roms i dont think thats gonna happen anytime soon, and there is nothing like official custom recovery, there is only custom recovery like TWRP or CMW.
Hi there, mate. If I do this process, will I be able to remove TWRP if needed (for updating reasons), if so, what would the process be?
adilrenzu said:
as for custom roms i dont think thats gonna happen anytime soon, and there is nothing like official custom recovery, there is only custom recovery like TWRP or CMW.
Click to expand...
Click to collapse
So you can't reflash the original recovery ? So that means no more OTA updates, but would it still work with an official update that was downloaded, assuming one becomes available ? Thanks !
adilrenzu
I was able to unlock bootloader, installed twrp and root according to your guide
and
also successfully returned to original stock 6.0 rom, stock recovery according to androidmtk's Lenovo_K53_USR_S107_1609131839_Q00380_ROW firmware.
This is a new toy for me now. Many thanks...:laugh:
Can you explain how you went back to stock?
webvan said:
Can you explain how you went back to stock?
Click to expand...
Click to collapse
Hi
Device cant update via ota. I dont really know K53_USR_S107_1609131839_Q00380_ROW firmware is last for some region or not. So Im trying to update to stock K53_S123_170216_ROW firmware. After testing and solving ota I will write all steps.
ok, thanks, I suppose it need to be downloaded first somewhere ?
Hello, I need help to recover my S8 PRO, it does not start,:crying::crying: and I have try flashed with flash tool and with "smartphone multi port download tool" and it gives me these errors, if someone can help me. Thank you
mfonemaello said:
Hello, I need help to recover my S8 PRO, it does not start,:crying::crying: and I have try flashed with flash tool and with "smartphone multi port download tool" and it gives me these errors, if someone can help me. Thank you
Click to expand...
Click to collapse
Can you specify what errors you're receiving, maybe I can help you, I have a S8 Pro too
thxs Klima i fixed
Klima1123 said:
Can you specify what errors you're receiving, maybe I can help you, I have a S8 Pro too
Click to expand...
Click to collapse
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
mfonemaello said:
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
Click to expand...
Click to collapse
I've heard about it, but I didn't noticed nothing strange coming from the app, I'll scan it with avast, if he finds something, I'll deleted him, my phone does have root
---------- Post added at 01:50 PM ---------- Previous post was at 01:41 PM ----------
Hey guy, I'm trying to port lineage os 14 & 15 to the S8 Pro, do you have experience with twrp, flash etc.? You could help with being my beta tester, next I'll put some betas on android file host, and make a forum here on XDA for the phone
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
4ndyroid said:
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
Click to expand...
Click to collapse
I have found it on 4pda.
Just google ulefone s8 pro 4pda.
You need to let translate by google, because of different language.
4ndyroid said:
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
Click to expand...
Click to collapse
Here: https://androidfilehost.com/?fid=962021903579483650
Use this to install twrp and magisk root
Hi, thanks you for your help, was able to flash twrp using the tool you directed me to, however now im stuck at the splash screen (ulefone s8 image) and phone wont boot (am able to flash stock rom to revocer phone, so not a complete brick, just cant get it to boot after flashing twrp), any ideads?
Klima1123 said:
Here: https://androidfilehost.com/?fid=962021903579483650
Use this to install twrp and magisk root
Click to expand...
Click to collapse
Doesn't work with the firmware V3.01 and V3.03. Getting in the recovery works fine, but booting the system is impossible. The boot stay stuck at the "S8 Pro With android (something)" splash screen.
4ndyroid said:
Hi, thanks you for your help, was able to flash twrp using the tool you directed me to, however now im stuck at the splash screen (ulefone s8 image) and phone wont boot (am able to flash stock rom to revocer phone, so not a complete brick, just cant get it to boot after flashing twrp), any ideads?
Click to expand...
Click to collapse
Something like this has happened to me too. Boot your phone on twrp then select the option 'Wipe', then "Format data", my phone only booted up after I did this
---------- Post added at 04:41 PM ---------- Previous post was at 04:36 PM ----------
mfonemaello said:
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
Click to expand...
Click to collapse
In the sound recorder I didnt find nothing, but the app GYBeautySnap aka BeautyMakeup open some annoyng processes (that consumes about 40mb of ram) that has something like ads, I think he is the real virus
Tried wiping then 'format system', still didn't work, stays stuck at the boot logo, bit thanks for the help anyway.
It rebootq only to a green TWRP!
Touf344 said:
Doesn't work with the firmware V3.01 and V3.03. Getting in the recovery works fine, but booting the system is impossible. The boot stay stuck at the "S8 Pro With android (something)" splash screen.
Click to expand...
Click to collapse
My phone use V3.01 firmware and it's worked
Klima1123 said:
My phone use V3.01 firmware and it's worked
Click to expand...
Click to collapse
What was the process you used?
4ndyroid said:
What was the process you used?
Click to expand...
Click to collapse
I've retried the whole process: flashed the stock rom, booted the phone on fastboot, used this (https://androidfilehost.com/?fid=962021903579483650) to install twrp, and then i tried booting the phone..... :silly: it's don't started , so i used that noverity.zip that comes with the tool, after this my phone booted, the tutorial that i used demands the installantion of this zip View attachment noverity.zip
Klima1123 said:
I've retried the whole process: flashed the stock rom, booted the phone on fastboot, used this (https://androidfilehost.com/?fid=962021903579483650) to install twrp, and then i tried booting the phone..... :silly: it's don't started , so i used that noverity.zip that comes with the tool, after this my phone booted, the tutorial that i used demands the installantion of this zip View attachment 4460246
Click to expand...
Click to collapse
Hi, thanks for your help, seems I missed the noverity.zip part. What is the noverity.zip and how did you install it? (flashed via TWRP, ADB or using the tool?) Could you link the tutorial you used?
4ndyroid said:
Hi, thanks for your help, seems I missed the noverity.zip part. What is the noverity.zip and how did you install it? (flashed via TWRP, ADB or using the tool?) Could you link the tutorial you used?
Click to expand...
Click to collapse
That noverity.zip disables a mechanism in the boot partition that verify the boot itself and the system partition, when you install twrp a little bit of the boot partition is altered and so the boot is blocked.
Install the zip using twrp. You can take a look at this (https://www.getdroidtips.com/twrp-recovery-ulefone-s8-pro/), but if I remember well, that s8 pro toolkit app is the one that asks you to install the zip
Klima1123 said:
That noverity.zip disables a mechanism in the boot partition that verify the boot itself and the system partition, when you install twrp a little bit of the boot partition is altered and so the boot is blocked.
Install the zip using twrp. You can take a look at this (https://www.getdroidtips.com/twrp-recovery-ulefone-s8-pro/), but if I remember well, that s8 pro toolkit app is the one that asks you to install the zip
Click to expand...
Click to collapse
Hi, thanks for the help, still didn't work even after flashing the noverity.zip but cheers anyway
4ndyroid said:
Hi, thanks for the help, still didn't work even after flashing the noverity.zip but cheers anyway
Click to expand...
Click to collapse
which firmware version are installed on your phone? Have you tried flashing the official ROM from the ulefone site, then retried the process?
Have tried on both v3. 01 & v3. 03 firmwares. Stock firmware wasn't downloaded directly from ulefone site, imagine it will be the same but will give it a go.
I'm form China.
YOTA3 full firmware Link:
[国人太利害，不想查水表.终于知道了！我投降！]
Y3-ota-236_Y3MXP1805077_full.zip is a local updata Full pag
Usage method:
Copy to your YOTA3.
Open setup->system update
Click on the top right corner menu.
Local upgrade
Select the file Y3-ota-236_Y3MXP1805077_full.zip
DO。。。。。。。。。
昨日之日不可留，今日之日多烦忧！
That is very cool. There is a root.docx that can be downloaded separately that can be partially translated using the google tools.
Update: Now i am facing a major problem. I have done this steps:
fastboot flashing unlock ok
fastboot boot patch_boot.img ok
now the phone starts and asks for a password. i tried 12345678 but it continues to say wrong password...how can i unlock it? for the phone there was no password set...
Hello,
is this the international rom version?
I tried to download it. To do so i have to install BaiduNetdisk. but after installing it, i still cant download it. It seems that i have to create an account or so...could you please upload it to a source, that offers at least an englisch version of its site?
update: found a workaround. I am using jdownloader. Start jdownloader, copy the url of the directory at baidu from browser. jdownloader asks for provided password "dnjq". Files are then added to jdownloader automatically. Start download and enter the capchas.
This solid is made by Chinese netizens.
Sorry!!!!Forgot to say that it is best to restore ROOT after the factory is out or without a password.
gor516don said:
This solid is made by Chinese netizens.
Sorry!!!!Forgot to say that it is best to restore ROOT after the factory is out or without a password.
Click to expand...
Click to collapse
I used your patched_boot.img, but now the phone asks for a password and I didn't have one.
vevgeniev said:
I used your patched_boot.img, but now the phone asks for a password and I didn't have one.
Click to expand...
Click to collapse
you can use magisk APP patch boot.img
I guess 128G and 64G's BOOT.img are different.
I found another way around:
Restored the factory image.
Set a PIN code.
Installed the patched boot img again.
Now the phone is unlocked and I have root.
Thank you for the instructions and the img file!
Do you know if it is possible to install custom recovery?
Some Chinese netizens are doing this, but nothing has been done.
2018/8/24 add twrp.img to this
https://pan.baidu.com/s/1ezT1OCrOMAzcrYRC5KbmPQ
password: dnjq
code:
fastboot flash recovery rec.img
fastboot flash recoverybp rec.img
(recoverybp is recovery backup)
Did you install this recovery img?
vevgeniev said:
Did you install this recovery img?
Click to expand...
Click to collapse
YES.I use this to backup my phone.
gor516don said:
YES.I use this to backup my phone.
Click to expand...
Click to collapse
Thanks a lot. The Y3 is now rooted!
Unfortunately i could not install the full rom you provided. Did anybody install this rom? I have the 128GB version of the Y3 could this be an issue?
leser12 said:
Thanks a lot. The Y3 is now rooted!
Unfortunately i could not install the full rom you provided. Did anybody install this rom? I have the 128GB version of the Y3 could this be an issue?
Click to expand...
Click to collapse
Mine is also 128G version. This ROM is brushed in local update mode. It is not painted with TWRP.
HI! I need STOK RECOVERY! anyone have, give me please !
KANT_IP said:
HI! I need STOK RECOVERY! anyone have, give me please !
Click to expand...
Click to collapse
I am update to baiduyun.
gor516don said:
I'm form China.
YOTA3 full firmware Link:
https://pan.baidu.com/s/1ezT1OCrOMAzcrYRC5KbmPQ
password: dnjq
Y3-ota-236_Y3MXP1805077_full.zip is a local updata Full pag
Usage method:
Copy to your YOTA3.
Open setup->system update
Click on the top right corner menu.
Local upgrade
Select the file Y3-ota-236_Y3MXP1805077_full.zip
DO。。。。。。。。。
Click to expand...
Click to collapse
what tool you use to flash, i cannot flash file img
whynot4444 said:
what tool you use to flash, i cannot flash file img
Click to expand...
Click to collapse
look 2 post.
gor516don said:
look 2 post.
Click to expand...
Click to collapse
i dont see it, can you help me find it, im use qpst to flash but it error
---------- Post added at 10:13 AM ---------- Previous post was at 10:12 AM ----------
gor516don said:
look 2 post.
Click to expand...
Click to collapse
i dont see it, im use QPST but it just error
whynot4444 said:
i dont see it, can you help me find it, im use qpst to flash but it error
---------- Post added at 10:13 AM ---------- Previous post was at 10:12 AM ----------
i dont see it, im use QPST but it just error
Click to expand...
Click to collapse
This Page has boot.img
Use Magisk Patch it
then press the power and volume down button after the fastboot screen.
use https://dl.google.com/android/reposi...st-windows.zip
run:
fastboot flashing unlock
fastboot boot patch_boot.img
patch_boot.img form magisk patch
if you flash recovery
fastboot flashing recovery TWRP.img